1 /**************************************************************************** 2 3 Copyright Echo Digital Audio Corporation (c) 1998 - 2004 4 All rights reserved 5 www.echoaudio.com 6 7 This file is part of Echo Digital Audio's generic driver library. 8 9 Echo Digital Audio's generic driver library is free software; 10 you can redistribute it and/or modify it under the terms of 11 the GNU General Public License as published by the Free Software Foundation. 12 13 This program is distributed in the hope that it will be useful, 14 but WITHOUT ANY WARRANTY; without even the implied warranty of 15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 GNU General Public License for more details. 17 18 You should have received a copy of the GNU General Public License 19 along with this program; if not, write to the Free Software 20 Foundation, Inc., 59 Temple Place - Suite 330, Boston, 21 MA 02111-1307, USA. 22 23 ************************************************************************* 24 25 Translation from C++ and adaptation for use in ALSA-Driver 26 were made by Giuliano Pochini <pochini@shiny.it> 27 28 ****************************************************************************/ 29 30 31 static int write_control_reg(struct echoaudio *chip, u32 value, char force); 32 static int set_input_clock(struct echoaudio *chip, u16 clock); 33 static int set_professional_spdif(struct echoaudio *chip, char prof); 34 static int set_digital_mode(struct echoaudio *chip, u8 mode); 35 static int load_asic_generic(struct echoaudio *chip, u32 cmd, short asic); 36 static int check_asic_status(struct echoaudio *chip); 37 38 39 static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id) 40 { 41 int err; 42 43 DE_INIT(("init_hw() - Layla24\n")); 44 if (snd_BUG_ON((subdevice_id & 0xfff0) != LAYLA24)) 45 return -ENODEV; 46 47 if ((err = init_dsp_comm_page(chip))) { 48 DE_INIT(("init_hw - could not initialize DSP comm page\n")); 49 return err; 50 } 51 52 chip->device_id = device_id; 53 chip->subdevice_id = subdevice_id; 54 chip->bad_board = TRUE; 55 chip->has_midi = TRUE; 56 chip->dsp_code_to_load = FW_LAYLA24_DSP; 57 chip->input_clock_types = 58 ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF | 59 ECHO_CLOCK_BIT_WORD | ECHO_CLOCK_BIT_ADAT; 60 chip->digital_modes = 61 ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA | 62 ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL | 63 ECHOCAPS_HAS_DIGITAL_MODE_ADAT; 64 65 if ((err = load_firmware(chip)) < 0) 66 return err; 67 chip->bad_board = FALSE; 68 69 if ((err = init_line_levels(chip)) < 0) 70 return err; 71 72 DE_INIT(("init_hw done\n")); 73 return err; 74 } 75 76 77 78 static int set_mixer_defaults(struct echoaudio *chip) 79 { 80 chip->digital_mode = DIGITAL_MODE_SPDIF_RCA; 81 chip->professional_spdif = FALSE; 82 chip->digital_in_automute = TRUE; 83 return init_line_levels(chip); 84 } 85 86 87 88 static u32 detect_input_clocks(const struct echoaudio *chip) 89 { 90 u32 clocks_from_dsp, clock_bits; 91 92 /* Map the DSP clock detect bits to the generic driver clock detect bits */ 93 clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks); 94 95 clock_bits = ECHO_CLOCK_BIT_INTERNAL; 96 97 if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF) 98 clock_bits |= ECHO_CLOCK_BIT_SPDIF; 99 100 if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_ADAT) 101 clock_bits |= ECHO_CLOCK_BIT_ADAT; 102 103 if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_WORD) 104 clock_bits |= ECHO_CLOCK_BIT_WORD; 105 106 return clock_bits; 107 } 108 109 110 111 /* Layla24 has an ASIC on the PCI card and another ASIC in the external box; 112 both need to be loaded. */ 113 static int load_asic(struct echoaudio *chip) 114 { 115 int err; 116 117 if (chip->asic_loaded) 118 return 1; 119 120 DE_INIT(("load_asic\n")); 121 122 /* Give the DSP a few milliseconds to settle down */ 123 mdelay(10); 124 125 /* Load the ASIC for the PCI card */ 126 err = load_asic_generic(chip, DSP_FNC_LOAD_LAYLA24_PCI_CARD_ASIC, 127 FW_LAYLA24_1_ASIC); 128 if (err < 0) 129 return err; 130 131 chip->asic_code = FW_LAYLA24_2S_ASIC; 132 133 /* Now give the new ASIC a little time to set up */ 134 mdelay(10); 135 136 /* Do the external one */ 137 err = load_asic_generic(chip, DSP_FNC_LOAD_LAYLA24_EXTERNAL_ASIC, 138 FW_LAYLA24_2S_ASIC); 139 if (err < 0) 140 return FALSE; 141 142 /* Now give the external ASIC a little time to set up */ 143 mdelay(10); 144 145 /* See if it worked */ 146 err = check_asic_status(chip); 147 148 /* Set up the control register if the load succeeded - 149 48 kHz, internal clock, S/PDIF RCA mode */ 150 if (!err) 151 err = write_control_reg(chip, GML_CONVERTER_ENABLE | GML_48KHZ, 152 TRUE); 153 154 DE_INIT(("load_asic() done\n")); 155 return err; 156 } 157 158 159 160 static int set_sample_rate(struct echoaudio *chip, u32 rate) 161 { 162 u32 control_reg, clock, base_rate; 163 164 if (snd_BUG_ON(rate >= 50000 && 165 chip->digital_mode == DIGITAL_MODE_ADAT)) 166 return -EINVAL; 167 168 /* Only set the clock for internal mode. */ 169 if (chip->input_clock != ECHO_CLOCK_INTERNAL) { 170 DE_ACT(("set_sample_rate: Cannot set sample rate - " 171 "clock not set to CLK_CLOCKININTERNAL\n")); 172 /* Save the rate anyhow */ 173 chip->comm_page->sample_rate = cpu_to_le32(rate); 174 chip->sample_rate = rate; 175 return 0; 176 } 177 178 /* Get the control register & clear the appropriate bits */ 179 control_reg = le32_to_cpu(chip->comm_page->control_register); 180 control_reg &= GML_CLOCK_CLEAR_MASK & GML_SPDIF_RATE_CLEAR_MASK; 181 182 clock = 0; 183 184 switch (rate) { 185 case 96000: 186 clock = GML_96KHZ; 187 break; 188 case 88200: 189 clock = GML_88KHZ; 190 break; 191 case 48000: 192 clock = GML_48KHZ | GML_SPDIF_SAMPLE_RATE1; 193 break; 194 case 44100: 195 clock = GML_44KHZ; 196 /* Professional mode */ 197 if (control_reg & GML_SPDIF_PRO_MODE) 198 clock |= GML_SPDIF_SAMPLE_RATE0; 199 break; 200 case 32000: 201 clock = GML_32KHZ | GML_SPDIF_SAMPLE_RATE0 | 202 GML_SPDIF_SAMPLE_RATE1; 203 break; 204 case 22050: 205 clock = GML_22KHZ; 206 break; 207 case 16000: 208 clock = GML_16KHZ; 209 break; 210 case 11025: 211 clock = GML_11KHZ; 212 break; 213 case 8000: 214 clock = GML_8KHZ; 215 break; 216 default: 217 /* If this is a non-standard rate, then the driver needs to 218 use Layla24's special "continuous frequency" mode */ 219 clock = LAYLA24_CONTINUOUS_CLOCK; 220 if (rate > 50000) { 221 base_rate = rate >> 1; 222 control_reg |= GML_DOUBLE_SPEED_MODE; 223 } else { 224 base_rate = rate; 225 } 226 227 if (base_rate < 25000) 228 base_rate = 25000; 229 230 if (wait_handshake(chip)) 231 return -EIO; 232 233 chip->comm_page->sample_rate = 234 cpu_to_le32(LAYLA24_MAGIC_NUMBER / base_rate - 2); 235 236 clear_handshake(chip); 237 send_vector(chip, DSP_VC_SET_LAYLA24_FREQUENCY_REG); 238 } 239 240 control_reg |= clock; 241 242 chip->comm_page->sample_rate = cpu_to_le32(rate); /* ignored by the DSP ? */ 243 chip->sample_rate = rate; 244 DE_ACT(("set_sample_rate: %d clock %d\n", rate, control_reg)); 245 246 return write_control_reg(chip, control_reg, FALSE); 247 } 248 249 250 251 static int set_input_clock(struct echoaudio *chip, u16 clock) 252 { 253 u32 control_reg, clocks_from_dsp; 254 255 /* Mask off the clock select bits */ 256 control_reg = le32_to_cpu(chip->comm_page->control_register) & 257 GML_CLOCK_CLEAR_MASK; 258 clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks); 259 260 /* Pick the new clock */ 261 switch (clock) { 262 case ECHO_CLOCK_INTERNAL: 263 DE_ACT(("Set Layla24 clock to INTERNAL\n")); 264 chip->input_clock = ECHO_CLOCK_INTERNAL; 265 return set_sample_rate(chip, chip->sample_rate); 266 case ECHO_CLOCK_SPDIF: 267 if (chip->digital_mode == DIGITAL_MODE_ADAT) 268 return -EAGAIN; 269 control_reg |= GML_SPDIF_CLOCK; 270 /* Layla24 doesn't support 96KHz S/PDIF */ 271 control_reg &= ~GML_DOUBLE_SPEED_MODE; 272 DE_ACT(("Set Layla24 clock to SPDIF\n")); 273 break; 274 case ECHO_CLOCK_WORD: 275 control_reg |= GML_WORD_CLOCK; 276 if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_WORD96) 277 control_reg |= GML_DOUBLE_SPEED_MODE; 278 else 279 control_reg &= ~GML_DOUBLE_SPEED_MODE; 280 DE_ACT(("Set Layla24 clock to WORD\n")); 281 break; 282 case ECHO_CLOCK_ADAT: 283 if (chip->digital_mode != DIGITAL_MODE_ADAT) 284 return -EAGAIN; 285 control_reg |= GML_ADAT_CLOCK; 286 control_reg &= ~GML_DOUBLE_SPEED_MODE; 287 DE_ACT(("Set Layla24 clock to ADAT\n")); 288 break; 289 default: 290 DE_ACT(("Input clock 0x%x not supported for Layla24\n", clock)); 291 return -EINVAL; 292 } 293 294 chip->input_clock = clock; 295 return write_control_reg(chip, control_reg, TRUE); 296 } 297 298 299 300 /* Depending on what digital mode you want, Layla24 needs different ASICs 301 loaded. This function checks the ASIC needed for the new mode and sees 302 if it matches the one already loaded. */ 303 static int switch_asic(struct echoaudio *chip, short asic) 304 { 305 s8 *monitors; 306 307 /* Check to see if this is already loaded */ 308 if (asic != chip->asic_code) { 309 monitors = kmemdup(chip->comm_page->monitors, 310 MONITOR_ARRAY_SIZE, GFP_KERNEL); 311 if (! monitors) 312 return -ENOMEM; 313 314 memset(chip->comm_page->monitors, ECHOGAIN_MUTED, 315 MONITOR_ARRAY_SIZE); 316 317 /* Load the desired ASIC */ 318 if (load_asic_generic(chip, DSP_FNC_LOAD_LAYLA24_EXTERNAL_ASIC, 319 asic) < 0) { 320 memcpy(chip->comm_page->monitors, monitors, 321 MONITOR_ARRAY_SIZE); 322 kfree(monitors); 323 return -EIO; 324 } 325 chip->asic_code = asic; 326 memcpy(chip->comm_page->monitors, monitors, MONITOR_ARRAY_SIZE); 327 kfree(monitors); 328 } 329 330 return 0; 331 } 332 333 334 335 static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode) 336 { 337 u32 control_reg; 338 int err, incompatible_clock; 339 short asic; 340 341 /* Set clock to "internal" if it's not compatible with the new mode */ 342 incompatible_clock = FALSE; 343 switch (mode) { 344 case DIGITAL_MODE_SPDIF_OPTICAL: 345 case DIGITAL_MODE_SPDIF_RCA: 346 if (chip->input_clock == ECHO_CLOCK_ADAT) 347 incompatible_clock = TRUE; 348 asic = FW_LAYLA24_2S_ASIC; 349 break; 350 case DIGITAL_MODE_ADAT: 351 if (chip->input_clock == ECHO_CLOCK_SPDIF) 352 incompatible_clock = TRUE; 353 asic = FW_LAYLA24_2A_ASIC; 354 break; 355 default: 356 DE_ACT(("Digital mode not supported: %d\n", mode)); 357 return -EINVAL; 358 } 359 360 if (incompatible_clock) { /* Switch to 48KHz, internal */ 361 chip->sample_rate = 48000; 362 spin_lock_irq(&chip->lock); 363 set_input_clock(chip, ECHO_CLOCK_INTERNAL); 364 spin_unlock_irq(&chip->lock); 365 } 366 367 /* switch_asic() can sleep */ 368 if (switch_asic(chip, asic) < 0) 369 return -EIO; 370 371 spin_lock_irq(&chip->lock); 372 373 /* Tweak the control register */ 374 control_reg = le32_to_cpu(chip->comm_page->control_register); 375 control_reg &= GML_DIGITAL_MODE_CLEAR_MASK; 376 377 switch (mode) { 378 case DIGITAL_MODE_SPDIF_OPTICAL: 379 control_reg |= GML_SPDIF_OPTICAL_MODE; 380 break; 381 case DIGITAL_MODE_SPDIF_RCA: 382 /* GML_SPDIF_OPTICAL_MODE bit cleared */ 383 break; 384 case DIGITAL_MODE_ADAT: 385 control_reg |= GML_ADAT_MODE; 386 control_reg &= ~GML_DOUBLE_SPEED_MODE; 387 break; 388 } 389 390 err = write_control_reg(chip, control_reg, TRUE); 391 spin_unlock_irq(&chip->lock); 392 if (err < 0) 393 return err; 394 chip->digital_mode = mode; 395 396 DE_ACT(("set_digital_mode to %d\n", mode)); 397 return incompatible_clock; 398 } 399