1 /**************************************************************************** 2 3 Copyright Echo Digital Audio Corporation (c) 1998 - 2004 4 All rights reserved 5 www.echoaudio.com 6 7 This file is part of Echo Digital Audio's generic driver library. 8 9 Echo Digital Audio's generic driver library is free software; 10 you can redistribute it and/or modify it under the terms of 11 the GNU General Public License as published by the Free Software 12 Foundation. 13 14 This program is distributed in the hope that it will be useful, 15 but WITHOUT ANY WARRANTY; without even the implied warranty of 16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 GNU General Public License for more details. 18 19 You should have received a copy of the GNU General Public License 20 along with this program; if not, write to the Free Software 21 Foundation, Inc., 59 Temple Place - Suite 330, Boston, 22 MA 02111-1307, USA. 23 24 ************************************************************************* 25 26 Translation from C++ and adaptation for use in ALSA-Driver 27 were made by Giuliano Pochini <pochini@shiny.it> 28 29 ****************************************************************************/ 30 31 32 /* These functions are common for Gina24, Layla24 and Mona cards */ 33 34 35 /* ASIC status check - some cards have one or two ASICs that need to be 36 loaded. Once that load is complete, this function is called to see if 37 the load was successful. 38 If this load fails, it does not necessarily mean that the hardware is 39 defective - the external box may be disconnected or turned off. */ 40 static int check_asic_status(struct echoaudio *chip) 41 { 42 u32 asic_status; 43 44 send_vector(chip, DSP_VC_TEST_ASIC); 45 46 /* The DSP will return a value to indicate whether or not the 47 ASIC is currently loaded */ 48 if (read_dsp(chip, &asic_status) < 0) { 49 dev_err(chip->card->dev, 50 "check_asic_status: failed on read_dsp\n"); 51 chip->asic_loaded = false; 52 return -EIO; 53 } 54 55 chip->asic_loaded = (asic_status == ASIC_ALREADY_LOADED); 56 return chip->asic_loaded ? 0 : -EIO; 57 } 58 59 60 61 /* Most configuration of Gina24, Layla24, or Mona is accomplished by writing 62 the control register. write_control_reg sends the new control register 63 value to the DSP. */ 64 static int write_control_reg(struct echoaudio *chip, u32 value, char force) 65 { 66 /* Handle the digital input auto-mute */ 67 if (chip->digital_in_automute) 68 value |= GML_DIGITAL_IN_AUTO_MUTE; 69 else 70 value &= ~GML_DIGITAL_IN_AUTO_MUTE; 71 72 dev_dbg(chip->card->dev, "write_control_reg: 0x%x\n", value); 73 74 /* Write the control register */ 75 value = cpu_to_le32(value); 76 if (value != chip->comm_page->control_register || force) { 77 if (wait_handshake(chip)) 78 return -EIO; 79 chip->comm_page->control_register = value; 80 clear_handshake(chip); 81 return send_vector(chip, DSP_VC_WRITE_CONTROL_REG); 82 } 83 return 0; 84 } 85 86 87 88 /* Gina24, Layla24, and Mona support digital input auto-mute. If the digital 89 input auto-mute is enabled, the DSP will only enable the digital inputs if 90 the card is syncing to a valid clock on the ADAT or S/PDIF inputs. 91 If the auto-mute is disabled, the digital inputs are enabled regardless of 92 what the input clock is set or what is connected. */ 93 static int set_input_auto_mute(struct echoaudio *chip, int automute) 94 { 95 dev_dbg(chip->card->dev, "set_input_auto_mute %d\n", automute); 96 97 chip->digital_in_automute = automute; 98 99 /* Re-set the input clock to the current value - indirectly causes 100 the auto-mute flag to be sent to the DSP */ 101 return set_input_clock(chip, chip->input_clock); 102 } 103 104 105 106 /* S/PDIF coax / S/PDIF optical / ADAT - switch */ 107 static int set_digital_mode(struct echoaudio *chip, u8 mode) 108 { 109 u8 previous_mode; 110 int err, i, o; 111 112 if (chip->bad_board) 113 return -EIO; 114 115 /* All audio channels must be closed before changing the digital mode */ 116 if (snd_BUG_ON(chip->pipe_alloc_mask)) 117 return -EAGAIN; 118 119 if (snd_BUG_ON(!(chip->digital_modes & (1 << mode)))) 120 return -EINVAL; 121 122 previous_mode = chip->digital_mode; 123 err = dsp_set_digital_mode(chip, mode); 124 125 /* If we successfully changed the digital mode from or to ADAT, 126 then make sure all output, input and monitor levels are 127 updated by the DSP comm object. */ 128 if (err >= 0 && previous_mode != mode && 129 (previous_mode == DIGITAL_MODE_ADAT || mode == DIGITAL_MODE_ADAT)) { 130 spin_lock_irq(&chip->lock); 131 for (o = 0; o < num_busses_out(chip); o++) 132 for (i = 0; i < num_busses_in(chip); i++) 133 set_monitor_gain(chip, o, i, 134 chip->monitor_gain[o][i]); 135 136 #ifdef ECHOCARD_HAS_INPUT_GAIN 137 for (i = 0; i < num_busses_in(chip); i++) 138 set_input_gain(chip, i, chip->input_gain[i]); 139 update_input_line_level(chip); 140 #endif 141 142 for (o = 0; o < num_busses_out(chip); o++) 143 set_output_gain(chip, o, chip->output_gain[o]); 144 update_output_line_level(chip); 145 spin_unlock_irq(&chip->lock); 146 } 147 148 return err; 149 } 150 151 152 153 /* Set the S/PDIF output format */ 154 static int set_professional_spdif(struct echoaudio *chip, char prof) 155 { 156 u32 control_reg; 157 int err; 158 159 /* Clear the current S/PDIF flags */ 160 control_reg = le32_to_cpu(chip->comm_page->control_register); 161 control_reg &= GML_SPDIF_FORMAT_CLEAR_MASK; 162 163 /* Set the new S/PDIF flags depending on the mode */ 164 control_reg |= GML_SPDIF_TWO_CHANNEL | GML_SPDIF_24_BIT | 165 GML_SPDIF_COPY_PERMIT; 166 if (prof) { 167 /* Professional mode */ 168 control_reg |= GML_SPDIF_PRO_MODE; 169 170 switch (chip->sample_rate) { 171 case 32000: 172 control_reg |= GML_SPDIF_SAMPLE_RATE0 | 173 GML_SPDIF_SAMPLE_RATE1; 174 break; 175 case 44100: 176 control_reg |= GML_SPDIF_SAMPLE_RATE0; 177 break; 178 case 48000: 179 control_reg |= GML_SPDIF_SAMPLE_RATE1; 180 break; 181 } 182 } else { 183 /* Consumer mode */ 184 switch (chip->sample_rate) { 185 case 32000: 186 control_reg |= GML_SPDIF_SAMPLE_RATE0 | 187 GML_SPDIF_SAMPLE_RATE1; 188 break; 189 case 48000: 190 control_reg |= GML_SPDIF_SAMPLE_RATE1; 191 break; 192 } 193 } 194 195 if ((err = write_control_reg(chip, control_reg, false))) 196 return err; 197 chip->professional_spdif = prof; 198 dev_dbg(chip->card->dev, "set_professional_spdif to %s\n", 199 prof ? "Professional" : "Consumer"); 200 return 0; 201 } 202