xref: /linux/sound/pci/asihpi/hpi.h (revision e0bf6c5ca2d3281f231c5f0c9bf145e9513644de)
1 /******************************************************************************
2 
3     AudioScience HPI driver
4     Copyright (C) 1997-2011  AudioScience Inc. <support@audioscience.com>
5 
6     This program is free software; you can redistribute it and/or modify
7     it under the terms of version 2 of the GNU General Public License as
8     published by the Free Software Foundation;
9 
10     This program is distributed in the hope that it will be useful,
11     but WITHOUT ANY WARRANTY; without even the implied warranty of
12     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13     GNU General Public License for more details.
14 
15     You should have received a copy of the GNU General Public License
16     along with this program; if not, write to the Free Software
17     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
18 
19 */
20 /** \file hpi.h
21 
22  AudioScience Hardware Programming Interface (HPI)
23  public API definition.
24 
25  The HPI is a low-level hardware abstraction layer to all
26  AudioScience digital audio adapters
27 
28 (C) Copyright AudioScience Inc. 1998-2010
29 */
30 
31 #ifndef _HPI_H_
32 #define _HPI_H_
33 
34 #include <linux/types.h>
35 #define HPI_BUILD_KERNEL_MODE
36 
37 /******************************************************************************/
38 /********       HPI API DEFINITIONS                                       *****/
39 /******************************************************************************/
40 
41 /*******************************************/
42 /**  Audio format types
43 \ingroup stream
44 */
45 enum HPI_FORMATS {
46 /** Used internally on adapter. */
47 	HPI_FORMAT_MIXER_NATIVE = 0,
48 /** 8-bit unsigned PCM. Windows equivalent is WAVE_FORMAT_PCM. */
49 	HPI_FORMAT_PCM8_UNSIGNED = 1,
50 /** 16-bit signed PCM. Windows equivalent is WAVE_FORMAT_PCM. */
51 	HPI_FORMAT_PCM16_SIGNED = 2,
52 /** MPEG-1 Layer-1. */
53 	HPI_FORMAT_MPEG_L1 = 3,
54 /** MPEG-1 Layer-2.
55 
56 Windows equivalent is WAVE_FORMAT_MPEG.
57 
58 The following table shows what combinations of mode and bitrate are possible:
59 
60 <table border=1 cellspacing=0 cellpadding=5>
61 <tr>
62 <td><p><b>Bitrate (kbs)</b></p>
63 <td><p><b>Mono</b></p>
64 <td><p><b>Stereo,<br>Joint Stereo or<br>Dual Channel</b></p>
65 
66 <tr><td>32<td>X<td>_
67 <tr><td>40<td>_<td>_
68 <tr><td>48<td>X<td>_
69 <tr><td>56<td>X<td>_
70 <tr><td>64<td>X<td>X
71 <tr><td>80<td>X<td>_
72 <tr><td>96<td>X<td>X
73 <tr><td>112<td>X<td>X
74 <tr><td>128<td>X<td>X
75 <tr><td>160<td>X<td>X
76 <tr><td>192<td>X<td>X
77 <tr><td>224<td>_<td>X
78 <tr><td>256<td>-<td>X
79 <tr><td>320<td>-<td>X
80 <tr><td>384<td>_<td>X
81 </table>
82 */
83 	HPI_FORMAT_MPEG_L2 = 4,
84 /** MPEG-1 Layer-3.
85 Windows equivalent is WAVE_FORMAT_MPEG.
86 
87 The following table shows what combinations of mode and bitrate are possible:
88 
89 <table border=1 cellspacing=0 cellpadding=5>
90 <tr>
91 <td><p><b>Bitrate (kbs)</b></p>
92 <td><p><b>Mono<br>Stereo @ 8,<br>11.025 and<br>12kHz*</b></p>
93 <td><p><b>Mono<br>Stereo @ 16,<br>22.050 and<br>24kHz*</b></p>
94 <td><p><b>Mono<br>Stereo @ 32,<br>44.1 and<br>48kHz</b></p>
95 
96 <tr><td>16<td>X<td>X<td>_
97 <tr><td>24<td>X<td>X<td>_
98 <tr><td>32<td>X<td>X<td>X
99 <tr><td>40<td>X<td>X<td>X
100 <tr><td>48<td>X<td>X<td>X
101 <tr><td>56<td>X<td>X<td>X
102 <tr><td>64<td>X<td>X<td>X
103 <tr><td>80<td>_<td>X<td>X
104 <tr><td>96<td>_<td>X<td>X
105 <tr><td>112<td>_<td>X<td>X
106 <tr><td>128<td>_<td>X<td>X
107 <tr><td>144<td>_<td>X<td>_
108 <tr><td>160<td>_<td>X<td>X
109 <tr><td>192<td>_<td>_<td>X
110 <tr><td>224<td>_<td>_<td>X
111 <tr><td>256<td>-<td>_<td>X
112 <tr><td>320<td>-<td>_<td>X
113 </table>
114 \b * Available on the ASI6000 series only
115 */
116 	HPI_FORMAT_MPEG_L3 = 5,
117 /** Dolby AC-2. */
118 	HPI_FORMAT_DOLBY_AC2 = 6,
119 /** Dolbt AC-3. */
120 	HPI_FORMAT_DOLBY_AC3 = 7,
121 /** 16-bit PCM big-endian. */
122 	HPI_FORMAT_PCM16_BIGENDIAN = 8,
123 /** TAGIT-1 algorithm - hits. */
124 	HPI_FORMAT_AA_TAGIT1_HITS = 9,
125 /** TAGIT-1 algorithm - inserts. */
126 	HPI_FORMAT_AA_TAGIT1_INSERTS = 10,
127 /** 32-bit signed PCM. Windows equivalent is WAVE_FORMAT_PCM.
128 Each sample is a 32bit word. The most significant 24 bits contain a 24-bit
129 sample and the least significant 8 bits are set to 0.
130 */
131 	HPI_FORMAT_PCM32_SIGNED = 11,
132 /** Raw bitstream - unknown format. */
133 	HPI_FORMAT_RAW_BITSTREAM = 12,
134 /** TAGIT-1 algorithm hits - extended. */
135 	HPI_FORMAT_AA_TAGIT1_HITS_EX1 = 13,
136 /** 32-bit PCM as an IEEE float. Windows equivalent is WAVE_FORMAT_IEEE_FLOAT.
137 Each sample is a 32bit word in IEEE754 floating point format.
138 The range is +1.0 to -1.0, which corresponds to digital fullscale.
139 */
140 	HPI_FORMAT_PCM32_FLOAT = 14,
141 /** 24-bit PCM signed. Windows equivalent is WAVE_FORMAT_PCM. */
142 	HPI_FORMAT_PCM24_SIGNED = 15,
143 /** OEM format 1 - private. */
144 	HPI_FORMAT_OEM1 = 16,
145 /** OEM format 2 - private. */
146 	HPI_FORMAT_OEM2 = 17,
147 /** Undefined format. */
148 	HPI_FORMAT_UNDEFINED = 0xffff
149 };
150 
151 /*******************************************/
152 /** Stream States
153 \ingroup stream
154 */
155 enum HPI_STREAM_STATES {
156 	/** State stopped - stream is stopped. */
157 	HPI_STATE_STOPPED = 1,
158 	/** State playing - stream is playing audio. */
159 	HPI_STATE_PLAYING = 2,
160 	/** State recording - stream is recording. */
161 	HPI_STATE_RECORDING = 3,
162 	/** State drained - playing stream ran out of data to play. */
163 	HPI_STATE_DRAINED = 4,
164 	/** State generate sine - to be implemented. */
165 	HPI_STATE_SINEGEN = 5,
166 	/** State wait - used for inter-card sync to mean waiting for all
167 		cards to be ready. */
168 	HPI_STATE_WAIT = 6
169 };
170 /*******************************************/
171 /** Source node types
172 \ingroup mixer
173 */
174 enum HPI_SOURCENODES {
175 	/** This define can be used instead of 0 to indicate
176 	that there is no valid source node. A control that
177 	exists on a destination node can be searched for using a source
178 	node value of either 0, or HPI_SOURCENODE_NONE */
179 	HPI_SOURCENODE_NONE = 100,
180 	/** Out Stream (Play) node. */
181 	HPI_SOURCENODE_OSTREAM = 101,
182 	/** Line in node - could be analog, AES/EBU or network. */
183 	HPI_SOURCENODE_LINEIN = 102,
184 	HPI_SOURCENODE_AESEBU_IN = 103,	     /**< AES/EBU input node. */
185 	HPI_SOURCENODE_TUNER = 104,	     /**< tuner node. */
186 	HPI_SOURCENODE_RF = 105,	     /**< RF input node. */
187 	HPI_SOURCENODE_CLOCK_SOURCE = 106,   /**< clock source node. */
188 	HPI_SOURCENODE_RAW_BITSTREAM = 107,  /**< raw bitstream node. */
189 	HPI_SOURCENODE_MICROPHONE = 108,     /**< microphone node. */
190 	/** Cobranet input node -
191 	    Audio samples come from the Cobranet network and into the device. */
192 	HPI_SOURCENODE_COBRANET = 109,
193 	HPI_SOURCENODE_ANALOG = 110,	     /**< analog input node. */
194 	HPI_SOURCENODE_ADAPTER = 111,	     /**< adapter node. */
195 	/** RTP stream input node - This node is a destination for
196 	    packets of RTP audio samples from other devices. */
197 	HPI_SOURCENODE_RTP_DESTINATION = 112,
198 	HPI_SOURCENODE_INTERNAL = 113,	     /**< node internal to the device. */
199 	HPI_SOURCENODE_AVB = 114,	     /**< AVB input stream */
200 	HPI_SOURCENODE_BLULINK = 115,	     /**< BLU-link input channel */
201 	/* !!!Update this  AND hpidebug.h if you add a new sourcenode type!!! */
202 	HPI_SOURCENODE_LAST_INDEX = 115	     /**< largest ID */
203 		/* AX6 max sourcenode types = 15 */
204 };
205 
206 /*******************************************/
207 /** Destination node types
208 \ingroup mixer
209 */
210 enum HPI_DESTNODES {
211 	/** This define can be used instead of 0 to indicate
212 	that there is no valid destination node. A control that
213 	exists on a source node can be searched for using a destination
214 	node value of either 0, or HPI_DESTNODE_NONE */
215 	HPI_DESTNODE_NONE = 200,
216 	/** In Stream (Record) node. */
217 	HPI_DESTNODE_ISTREAM = 201,
218 	HPI_DESTNODE_LINEOUT = 202,	     /**< line out node. */
219 	HPI_DESTNODE_AESEBU_OUT = 203,	     /**< AES/EBU output node. */
220 	HPI_DESTNODE_RF = 204,		     /**< RF output node. */
221 	HPI_DESTNODE_SPEAKER = 205,	     /**< speaker output node. */
222 	/** Cobranet output node -
223 	    Audio samples from the device are sent out on the Cobranet network.*/
224 	HPI_DESTNODE_COBRANET = 206,
225 	HPI_DESTNODE_ANALOG = 207,	     /**< analog output node. */
226 	/** RTP stream output node - This node is a source for
227 	    packets of RTP audio samples that are sent to other devices. */
228 	HPI_DESTNODE_RTP_SOURCE = 208,
229 	HPI_DESTNODE_AVB = 209,		     /**< AVB output stream */
230 	HPI_DESTNODE_INTERNAL = 210,	     /**< node internal to the device. */
231 	HPI_DESTNODE_BLULINK = 211,	     /**< BLU-link output channel. */
232 	/* !!!Update this AND hpidebug.h if you add a new destnode type!!! */
233 	HPI_DESTNODE_LAST_INDEX = 211	     /**< largest ID */
234 		/* AX6 max destnode types = 15 */
235 };
236 
237 /*******************************************/
238 /** Mixer control types
239 \ingroup mixer
240 */
241 enum HPI_CONTROLS {
242 	HPI_CONTROL_GENERIC = 0,	/**< generic control. */
243 	HPI_CONTROL_CONNECTION = 1, /**< A connection between nodes. */
244 	HPI_CONTROL_VOLUME = 2,	      /**< volume control - works in dB_fs. */
245 	HPI_CONTROL_METER = 3,	/**< peak meter control. */
246 	HPI_CONTROL_MUTE = 4,	/*mute control - not used at present. */
247 	HPI_CONTROL_MULTIPLEXER = 5,	/**< multiplexer control. */
248 
249 	HPI_CONTROL_AESEBU_TRANSMITTER = 6, /**< AES/EBU transmitter control */
250 	HPI_CONTROL_AESEBUTX = 6,	/* HPI_CONTROL_AESEBU_TRANSMITTER */
251 
252 	HPI_CONTROL_AESEBU_RECEIVER = 7, /**< AES/EBU receiver control. */
253 	HPI_CONTROL_AESEBURX = 7,	/* HPI_CONTROL_AESEBU_RECEIVER */
254 
255 	HPI_CONTROL_LEVEL = 8, /**< level/trim control - works in d_bu. */
256 	HPI_CONTROL_TUNER = 9,	/**< tuner control. */
257 /*      HPI_CONTROL_ONOFFSWITCH =       10 */
258 	HPI_CONTROL_VOX = 11,	/**< vox control. */
259 /*      HPI_CONTROL_AES18_TRANSMITTER = 12 */
260 /*      HPI_CONTROL_AES18_RECEIVER = 13 */
261 /*      HPI_CONTROL_AES18_BLOCKGENERATOR  = 14 */
262 	HPI_CONTROL_CHANNEL_MODE = 15,	/**< channel mode control. */
263 
264 	HPI_CONTROL_BITSTREAM = 16,	/**< bitstream control. */
265 	HPI_CONTROL_SAMPLECLOCK = 17,	/**< sample clock control. */
266 	HPI_CONTROL_MICROPHONE = 18,	/**< microphone control. */
267 	HPI_CONTROL_PARAMETRIC_EQ = 19,	/**< parametric EQ control. */
268 	HPI_CONTROL_EQUALIZER = 19,	/*HPI_CONTROL_PARAMETRIC_EQ */
269 
270 	HPI_CONTROL_COMPANDER = 20,	/**< compander control. */
271 	HPI_CONTROL_COBRANET = 21,	/**< cobranet control. */
272 	HPI_CONTROL_TONEDETECTOR = 22,	/**< tone detector control. */
273 	HPI_CONTROL_SILENCEDETECTOR = 23,	/**< silence detector control. */
274 	HPI_CONTROL_PAD = 24,	/**< tuner PAD control. */
275 	HPI_CONTROL_SRC = 25,	/**< samplerate converter control. */
276 	HPI_CONTROL_UNIVERSAL = 26,	/**< universal control. */
277 
278 /*  !!! Update this AND hpidebug.h if you add a new control type!!!*/
279 	HPI_CONTROL_LAST_INDEX = 26 /**<highest control type ID */
280 /* WARNING types 256 or greater impact bit packing in all AX6 DSP code */
281 };
282 
283 /*******************************************/
284 /** Adapter properties
285 These are used in HPI_AdapterSetProperty() and HPI_AdapterGetProperty()
286 \ingroup adapter
287 */
288 enum HPI_ADAPTER_PROPERTIES {
289 /** \internal Used in dwProperty field of HPI_AdapterSetProperty() and
290 HPI_AdapterGetProperty(). This errata applies to all ASI6000 cards with both
291 analog and digital outputs. The CS4224 A/D+D/A has a one sample delay between
292 left and right channels on both its input (ADC) and output (DAC).
293 More details are available in Cirrus Logic errata ER284B2.
294 PDF available from www.cirrus.com, released by Cirrus in 2001.
295 */
296 	HPI_ADAPTER_PROPERTY_ERRATA_1 = 1,
297 
298 /** Adapter grouping property
299 Indicates whether the adapter supports the grouping API (for ASIO and SSX2)
300 */
301 	HPI_ADAPTER_PROPERTY_GROUPING = 2,
302 
303 /** Driver SSX2 property
304 Tells the kernel driver to turn on SSX2 stream mapping.
305 This feature is not used by the DSP. In fact the call is completely processed
306 by the driver and is not passed on to the DSP at all.
307 */
308 	HPI_ADAPTER_PROPERTY_ENABLE_SSX2 = 3,
309 
310 /** Adapter SSX2 property
311 Indicates the state of the adapter's SSX2 setting. This setting is stored in
312 non-volatile memory on the adapter. A typical call sequence would be to use
313 HPI_ADAPTER_PROPERTY_SSX2_SETTING to set SSX2 on the adapter and then to reload
314 the driver. The driver would query HPI_ADAPTER_PROPERTY_SSX2_SETTING during
315 startup and if SSX2 is set, it would then call HPI_ADAPTER_PROPERTY_ENABLE_SSX2
316 to enable SSX2 stream mapping within the kernel level of the driver.
317 */
318 	HPI_ADAPTER_PROPERTY_SSX2_SETTING = 4,
319 
320 /** Enables/disables PCI(e) IRQ.
321 A setting of 0 indicates that no interrupts are being generated. A DSP boot
322 this property is set to 0. Setting to a non-zero value specifies the number
323 of frames of audio that should be processed between interrupts. This property
324 should be set to multiple of the mixer interval as read back from the
325 HPI_ADAPTER_PROPERTY_INTERVAL property.
326 */
327 	HPI_ADAPTER_PROPERTY_IRQ_RATE = 5,
328 
329 /** Base number for readonly properties */
330 	HPI_ADAPTER_PROPERTY_READONLYBASE = 256,
331 
332 /** Readonly adapter latency property.
333 This property returns in the input and output latency in samples.
334 Property 1 is the estimated input latency
335 in samples, while Property 2 is that output latency in  samples.
336 */
337 	HPI_ADAPTER_PROPERTY_LATENCY = 256,
338 
339 /** Readonly adapter granularity property.
340 The granulariy is the smallest size chunk of stereo samples that is processed by
341 the adapter.
342 This property returns the record granularity in samples in Property 1.
343 Property 2 returns the play granularity.
344 */
345 	HPI_ADAPTER_PROPERTY_GRANULARITY = 257,
346 
347 /** Readonly adapter number of current channels property.
348 Property 1 is the number of record channels per record device.
349 Property 2 is the number of play channels per playback device.*/
350 	HPI_ADAPTER_PROPERTY_CURCHANNELS = 258,
351 
352 /** Readonly adapter software version.
353 The SOFTWARE_VERSION property returns the version of the software running
354 on the adapter as Major.Minor.Release.
355 Property 1 contains Major in bits 15..8 and Minor in bits 7..0.
356 Property 2 contains Release in bits 7..0. */
357 	HPI_ADAPTER_PROPERTY_SOFTWARE_VERSION = 259,
358 
359 /** Readonly adapter MAC address MSBs.
360 The MAC_ADDRESS_MSB property returns
361 the most significant 32 bits of the MAC address.
362 Property 1 contains bits 47..32 of the MAC address.
363 Property 2 contains bits 31..16 of the MAC address. */
364 	HPI_ADAPTER_PROPERTY_MAC_ADDRESS_MSB = 260,
365 
366 /** Readonly adapter MAC address LSBs
367 The MAC_ADDRESS_LSB property returns
368 the least significant 16 bits of the MAC address.
369 Property 1 contains bits 15..0 of the MAC address. */
370 	HPI_ADAPTER_PROPERTY_MAC_ADDRESS_LSB = 261,
371 
372 /** Readonly extended adapter type number
373 The EXTENDED_ADAPTER_TYPE property returns the 4 digits of an extended
374 adapter type, i.e ASI8920-0022, 0022 is the extended type.
375 The digits are returned as ASCII characters rather than the hex digits that
376 are returned for the main type
377 Property 1 returns the 1st two (left most) digits, i.e "00"
378 in the example above, the upper byte being the left most digit.
379 Property 2 returns the 2nd two digits, i.e "22" in the example above*/
380 	HPI_ADAPTER_PROPERTY_EXTENDED_ADAPTER_TYPE = 262,
381 
382 /** Readonly debug log buffer information */
383 	HPI_ADAPTER_PROPERTY_LOGTABLEN = 263,
384 	HPI_ADAPTER_PROPERTY_LOGTABBEG = 264,
385 
386 /** Readonly adapter IP address
387 For 192.168.1.101
388 Property 1 returns the 1st two (left most) digits, i.e 192*256 + 168
389 in the example above, the upper byte being the left most digit.
390 Property 2 returns the 2nd two digits, i.e 1*256 + 101 in the example above, */
391 	HPI_ADAPTER_PROPERTY_IP_ADDRESS = 265,
392 
393 /** Readonly adapter buffer processed count. Returns a buffer processed count
394 that is incremented every time all buffers for all streams are updated. This
395 is useful for checking completion of all stream operations across the adapter
396 when using grouped streams.
397 */
398 	HPI_ADAPTER_PROPERTY_BUFFER_UPDATE_COUNT = 266,
399 
400 /** Readonly mixer and stream intervals
401 
402 These intervals are  measured in mixer frames.
403 To convert to time, divide  by the adapter samplerate.
404 
405 The mixer interval is the number of frames processed in one mixer iteration.
406 The stream update interval is the interval at which streams check for and
407 process data, and BBM host buffer counters are updated.
408 
409 Property 1 is the mixer interval in mixer frames.
410 Property 2 is the stream update interval in mixer frames.
411 */
412 	HPI_ADAPTER_PROPERTY_INTERVAL = 267,
413 /** Adapter capabilities 1
414 Property 1 - adapter can do multichannel (SSX1)
415 Property 2 - adapter can do stream grouping (supports SSX2)
416 */
417 	HPI_ADAPTER_PROPERTY_CAPS1 = 268,
418 /** Adapter capabilities 2
419 Property 1 - adapter can do samplerate conversion (MRX)
420 Property 2 - adapter can do timestretch (TSX)
421 */
422 	HPI_ADAPTER_PROPERTY_CAPS2 = 269,
423 
424 /** Readonly adapter sync header connection count.
425 */
426 	HPI_ADAPTER_PROPERTY_SYNC_HEADER_CONNECTIONS = 270,
427 /** Readonly supports SSX2 property.
428 Indicates the adapter supports SSX2 in some mode setting. The
429 return value is true (1) or false (0). If the current adapter
430 mode is MONO SSX2 is disabled, even though this property will
431 return true.
432 */
433 	HPI_ADAPTER_PROPERTY_SUPPORTS_SSX2 = 271,
434 /** Readonly supports PCI(e) IRQ.
435 Indicates that the adapter in it's current mode supports interrupts
436 across the host bus. Note, this does not imply that interrupts are
437 enabled. Instead it indicates that they can be enabled.
438 */
439 	HPI_ADAPTER_PROPERTY_SUPPORTS_IRQ = 272,
440 /** Readonly supports firmware updating.
441 Indicates that the adapter implements an interface to update firmware
442 on the adapter.
443 */
444 	HPI_ADAPTER_PROPERTY_SUPPORTS_FW_UPDATE = 273,
445 /** Readonly Firmware IDs
446 Identifiy firmware independent of individual adapter type.
447 May be used as a filter for firmware update images.
448 Property 1 = Bootloader ID
449 Property 2 = Main program ID
450 */
451 	HPI_ADAPTER_PROPERTY_FIRMWARE_ID = 274
452 };
453 
454 /** Adapter mode commands
455 
456 Used in wQueryOrSet parameter of HPI_AdapterSetModeEx().
457 \ingroup adapter
458 */
459 enum HPI_ADAPTER_MODE_CMDS {
460 	/** Set the mode to the given parameter */
461 	HPI_ADAPTER_MODE_SET = 0,
462 	/** Return 0 or error depending whether mode is valid,
463 	but don't set the mode */
464 	HPI_ADAPTER_MODE_QUERY = 1
465 };
466 
467 /** Adapter Modes
468  These are used by HPI_AdapterSetModeEx()
469 
470 \warning - more than 16 possible modes breaks
471 a bitmask in the Windows WAVE DLL
472 \ingroup adapter
473 */
474 enum HPI_ADAPTER_MODES {
475 /** 4 outstream mode.
476 - ASI6114: 1 instream
477 - ASI6044: 4 instreams
478 - ASI6012: 1 instream
479 - ASI6102: no instreams
480 - ASI6022, ASI6122: 2 instreams
481 - ASI5111, ASI5101: 2 instreams
482 - ASI652x, ASI662x: 2 instreams
483 - ASI654x, ASI664x: 4 instreams
484 */
485 	HPI_ADAPTER_MODE_4OSTREAM = 1,
486 
487 /** 6 outstream mode.
488 - ASI6012: 1 instream,
489 - ASI6022, ASI6122: 2 instreams
490 - ASI652x, ASI662x: 4 instreams
491 */
492 	HPI_ADAPTER_MODE_6OSTREAM = 2,
493 
494 /** 8 outstream mode.
495 - ASI6114: 8 instreams
496 - ASI6118: 8 instreams
497 - ASI6585: 8 instreams
498 */
499 	HPI_ADAPTER_MODE_8OSTREAM = 3,
500 
501 /** 16 outstream mode.
502 - ASI6416 16 instreams
503 - ASI6518, ASI6618 16 instreams
504 - ASI6118 16 mono out and in streams
505 */
506 	HPI_ADAPTER_MODE_16OSTREAM = 4,
507 
508 /** one outstream mode.
509 - ASI5111 1 outstream, 1 instream
510 */
511 	HPI_ADAPTER_MODE_1OSTREAM = 5,
512 
513 /** ASI504X mode 1. 12 outstream, 4 instream 0 to 48kHz sample rates
514 	(see ASI504X datasheet for more info).
515 */
516 	HPI_ADAPTER_MODE_1 = 6,
517 
518 /** ASI504X mode 2. 4 outstreams, 4 instreams at 0 to 192kHz sample rates
519 	(see ASI504X datasheet for more info).
520 */
521 	HPI_ADAPTER_MODE_2 = 7,
522 
523 /** ASI504X mode 3. 4 outstreams, 4 instreams at 0 to 192kHz sample rates
524 	(see ASI504X datasheet for more info).
525 */
526 	HPI_ADAPTER_MODE_3 = 8,
527 
528 /** ASI504X multichannel mode.
529 	2 outstreams -> 4 line outs = 1 to 8 channel streams),
530 	4 lineins -> 1 instream (1 to 8 channel streams) at 0-48kHz.
531 	For more info see the SSX Specification.
532 */
533 	HPI_ADAPTER_MODE_MULTICHANNEL = 9,
534 
535 /** 12 outstream mode.
536 - ASI6514, ASI6614: 2 instreams
537 - ASI6540,ASI6544: 8 instreams
538 - ASI6640,ASI6644: 8 instreams
539 */
540 	HPI_ADAPTER_MODE_12OSTREAM = 10,
541 
542 /** 9 outstream mode.
543 - ASI6044: 8 instreams
544 */
545 	HPI_ADAPTER_MODE_9OSTREAM = 11,
546 
547 /** mono mode.
548 - ASI6416: 16 outstreams/instreams
549 - ASI5402: 2 outstreams/instreams
550 */
551 	HPI_ADAPTER_MODE_MONO = 12,
552 
553 /** Low latency mode.
554 - ASI6416/ASI6316: 1 16 channel outstream and instream
555 */
556 	HPI_ADAPTER_MODE_LOW_LATENCY = 13
557 };
558 
559 /* Note, adapters can have more than one capability -
560 encoding as bitfield is recommended. */
561 #define HPI_CAPABILITY_NONE             (0)
562 #define HPI_CAPABILITY_MPEG_LAYER3      (1)
563 
564 /* Set this equal to maximum capability index,
565 Must not be greater than 32 - see axnvdef.h */
566 #define HPI_CAPABILITY_MAX                      1
567 /* #define HPI_CAPABILITY_AAC              2 */
568 
569 /******************************************* STREAM ATTRIBUTES ****/
570 
571 /** MPEG Ancillary Data modes
572 
573 The mode for the ancillary data insertion or extraction to operate in.
574 \ingroup stream
575 */
576 enum HPI_MPEG_ANC_MODES {
577 	/** the MPEG frames have energy information stored in them (5 bytes per stereo frame, 3 per mono) */
578 	HPI_MPEG_ANC_HASENERGY = 0,
579 	/** the entire ancillary data field is taken up by data from the Anc data buffer
580 	On encode, the encoder will insert the energy bytes before filling the remainder
581 	of the ancillary data space with data from the ancillary data buffer.
582 	*/
583 	HPI_MPEG_ANC_RAW = 1
584 };
585 
586 /** Ancillary Data Alignment
587 \ingroup instream
588 */
589 enum HPI_ISTREAM_MPEG_ANC_ALIGNS {
590 	/** data is packed against the end of data, then padded to the end of frame */
591 	HPI_MPEG_ANC_ALIGN_LEFT = 0,
592 	/** data is packed against the end of the frame */
593 	HPI_MPEG_ANC_ALIGN_RIGHT = 1
594 };
595 
596 /** MPEG modes
597 MPEG modes - can be used optionally for HPI_FormatCreate()
598 parameter dwAttributes.
599 
600 Using any mode setting other than HPI_MPEG_MODE_DEFAULT
601 with single channel format will return an error.
602 \ingroup stream
603 */
604 enum HPI_MPEG_MODES {
605 /** Causes the MPEG-1 Layer II bitstream to be recorded
606 in single_channel mode when the number of channels is 1 and in stereo when the
607 number of channels is 2. */
608 	HPI_MPEG_MODE_DEFAULT = 0,
609 	/** Standard stereo without joint-stereo compression */
610 	HPI_MPEG_MODE_STEREO = 1,
611 	/** Joint stereo  */
612 	HPI_MPEG_MODE_JOINTSTEREO = 2,
613 	/** Left and Right channels are completely independent */
614 	HPI_MPEG_MODE_DUALCHANNEL = 3
615 };
616 /******************************************* MIXER ATTRIBUTES ****/
617 
618 /* \defgroup mixer_flags Mixer flags for HPI_MIXER_GET_CONTROL_MULTIPLE_VALUES
619 {
620 */
621 #define HPI_MIXER_GET_CONTROL_MULTIPLE_CHANGED  (0)
622 #define HPI_MIXER_GET_CONTROL_MULTIPLE_RESET    (1)
623 /*}*/
624 
625 /** Commands used by HPI_MixerStore()
626 \ingroup mixer
627 */
628 enum HPI_MIXER_STORE_COMMAND {
629 /** Save all mixer control settings. */
630 	HPI_MIXER_STORE_SAVE = 1,
631 /** Restore all controls from saved. */
632 	HPI_MIXER_STORE_RESTORE = 2,
633 /** Delete saved control settings. */
634 	HPI_MIXER_STORE_DELETE = 3,
635 /** Enable auto storage of some control settings. */
636 	HPI_MIXER_STORE_ENABLE = 4,
637 /** Disable auto storage of some control settings. */
638 	HPI_MIXER_STORE_DISABLE = 5,
639 /** Unimplemented - save the attributes of a single control. */
640 	HPI_MIXER_STORE_SAVE_SINGLE = 6
641 };
642 
643 /****************************/
644 /* CONTROL ATTRIBUTE VALUES */
645 /****************************/
646 
647 /** Used by mixer plugin enable functions
648 
649 E.g. HPI_ParametricEq_SetState()
650 \ingroup mixer
651 */
652 enum HPI_SWITCH_STATES {
653 	HPI_SWITCH_OFF = 0,	/**< turn the mixer plugin on. */
654 	HPI_SWITCH_ON = 1	/**< turn the mixer plugin off. */
655 };
656 
657 /* Volume control special gain values */
658 
659 /** volumes units are 100ths of a dB
660 \ingroup volume
661 */
662 #define HPI_UNITS_PER_dB                100
663 /** turns volume control OFF or MUTE
664 \ingroup volume
665 */
666 #define HPI_GAIN_OFF                    (-100 * HPI_UNITS_PER_dB)
667 
668 /** channel mask specifying all channels
669 \ingroup volume
670 */
671 #define HPI_BITMASK_ALL_CHANNELS        (0xFFFFFFFF)
672 
673 /** value returned for no signal
674 \ingroup meter
675 */
676 #define HPI_METER_MINIMUM               (-150 * HPI_UNITS_PER_dB)
677 
678 /** autofade profiles
679 \ingroup volume
680 */
681 enum HPI_VOLUME_AUTOFADES {
682 /** log fade - dB attenuation changes linearly over time */
683 	HPI_VOLUME_AUTOFADE_LOG = 2,
684 /** linear fade - amplitude changes linearly */
685 	HPI_VOLUME_AUTOFADE_LINEAR = 3
686 };
687 
688 /** The physical encoding format of the AESEBU I/O.
689 
690 Used in HPI_Aesebu_Transmitter_SetFormat(), HPI_Aesebu_Receiver_SetFormat()
691 along with related Get and Query functions
692 \ingroup aestx
693 */
694 enum HPI_AESEBU_FORMATS {
695 /** AES/EBU physical format - AES/EBU balanced "professional"  */
696 	HPI_AESEBU_FORMAT_AESEBU = 1,
697 /** AES/EBU physical format - S/PDIF unbalanced "consumer"      */
698 	HPI_AESEBU_FORMAT_SPDIF = 2
699 };
700 
701 /** AES/EBU error status bits
702 
703 Returned by HPI_Aesebu_Receiver_GetErrorStatus()
704 \ingroup aesrx
705 */
706 enum HPI_AESEBU_ERRORS {
707 /**  bit0: 1 when PLL is not locked */
708 	HPI_AESEBU_ERROR_NOT_LOCKED = 0x01,
709 /**  bit1: 1 when signal quality is poor */
710 	HPI_AESEBU_ERROR_POOR_QUALITY = 0x02,
711 /** bit2: 1 when there is a parity error */
712 	HPI_AESEBU_ERROR_PARITY_ERROR = 0x04,
713 /**  bit3: 1 when there is a bi-phase coding violation */
714 	HPI_AESEBU_ERROR_BIPHASE_VIOLATION = 0x08,
715 /**  bit4: 1 when the validity bit is high */
716 	HPI_AESEBU_ERROR_VALIDITY = 0x10,
717 /**  bit5: 1 when the CRC error bit is high */
718 	HPI_AESEBU_ERROR_CRC = 0x20
719 };
720 
721 /** \addtogroup pad
722 \{
723 */
724 /** The text string containing the station/channel combination. */
725 #define HPI_PAD_CHANNEL_NAME_LEN        16
726 /** The text string containing the artist. */
727 #define HPI_PAD_ARTIST_LEN              64
728 /** The text string containing the title. */
729 #define HPI_PAD_TITLE_LEN               64
730 /** The text string containing the comment. */
731 #define HPI_PAD_COMMENT_LEN             256
732 /** The PTY when the tuner has not received any PTY. */
733 #define HPI_PAD_PROGRAM_TYPE_INVALID    0xffff
734 /** \} */
735 
736 /** Data types for PTY string translation.
737 \ingroup rds
738 */
739 enum eHPI_RDS_type {
740 	HPI_RDS_DATATYPE_RDS = 0,	/**< RDS bitstream.*/
741 	HPI_RDS_DATATYPE_RBDS = 1	/**< RBDS bitstream.*/
742 };
743 
744 /** Tuner bands
745 
746 Used for HPI_Tuner_SetBand(),HPI_Tuner_GetBand()
747 \ingroup tuner
748 */
749 enum HPI_TUNER_BAND {
750 	HPI_TUNER_BAND_AM = 1,	 /**< AM band */
751 	HPI_TUNER_BAND_FM = 2,	 /**< FM band (mono) */
752 	HPI_TUNER_BAND_TV_NTSC_M = 3,	 /**< NTSC-M TV band*/
753 	HPI_TUNER_BAND_TV = 3,	/* use TV_NTSC_M */
754 	HPI_TUNER_BAND_FM_STEREO = 4,	 /**< FM band (stereo) */
755 	HPI_TUNER_BAND_AUX = 5,	 /**< auxiliary input */
756 	HPI_TUNER_BAND_TV_PAL_BG = 6,	 /**< PAL-B/G TV band*/
757 	HPI_TUNER_BAND_TV_PAL_I = 7,	 /**< PAL-I TV band*/
758 	HPI_TUNER_BAND_TV_PAL_DK = 8,	 /**< PAL-D/K TV band*/
759 	HPI_TUNER_BAND_TV_SECAM_L = 9,	 /**< SECAM-L TV band*/
760 	HPI_TUNER_BAND_DAB = 10,
761 	HPI_TUNER_BAND_LAST = 10 /**< the index of the last tuner band. */
762 };
763 
764 /** Tuner mode attributes
765 
766 Used by HPI_Tuner_SetMode(), HPI_Tuner_GetMode()
767 \ingroup tuner
768 
769 */
770 enum HPI_TUNER_MODES {
771 	HPI_TUNER_MODE_RSS = 1,	/**< control  RSS */
772 	HPI_TUNER_MODE_RDS = 2	/**< control  RBDS/RDS */
773 };
774 
775 /** Tuner mode attribute values
776 
777 Used by HPI_Tuner_SetMode(), HPI_Tuner_GetMode()
778 \ingroup tuner
779 */
780 enum HPI_TUNER_MODE_VALUES {
781 /* RSS attribute values */
782 	HPI_TUNER_MODE_RSS_DISABLE = 0,	/**< RSS disable */
783 	HPI_TUNER_MODE_RSS_ENABLE = 1,	/**< RSS enable */
784 
785 /* RDS mode attributes */
786 	HPI_TUNER_MODE_RDS_DISABLE = 0,	/**< RDS - disabled */
787 	HPI_TUNER_MODE_RDS_RDS = 1,  /**< RDS - RDS mode */
788 	HPI_TUNER_MODE_RDS_RBDS = 2 /**<  RDS - RBDS mode */
789 };
790 
791 /** Tuner Status Bits
792 
793 These bitfield values are returned by a call to HPI_Tuner_GetStatus().
794 Multiple fields are returned from a single call.
795 \ingroup tuner
796 */
797 enum HPI_TUNER_STATUS_BITS {
798 	HPI_TUNER_VIDEO_COLOR_PRESENT = 0x0001,	/**< video color is present. */
799 	HPI_TUNER_VIDEO_IS_60HZ = 0x0020, /**< 60 hz video detected. */
800 	HPI_TUNER_VIDEO_HORZ_SYNC_MISSING = 0x0040, /**< video HSYNC is missing. */
801 	HPI_TUNER_VIDEO_STATUS_VALID = 0x0100, /**< video status is valid. */
802 	HPI_TUNER_DIGITAL = 0x0200, /**< tuner reports digital programming. */
803 	HPI_TUNER_MULTIPROGRAM = 0x0400, /**< tuner reports multiple programs. */
804 	HPI_TUNER_PLL_LOCKED = 0x1000, /**< the tuner's PLL is locked. */
805 	HPI_TUNER_FM_STEREO = 0x2000 /**< tuner reports back FM stereo. */
806 };
807 
808 /** Channel Modes
809 Used for HPI_ChannelModeSet/Get()
810 \ingroup channelmode
811 */
812 enum HPI_CHANNEL_MODES {
813 /** Left channel out = left channel in, Right channel out = right channel in. */
814 	HPI_CHANNEL_MODE_NORMAL = 1,
815 /** Left channel out = right channel in, Right channel out = left channel in. */
816 	HPI_CHANNEL_MODE_SWAP = 2,
817 /** Left channel out = left channel in, Right channel out = left channel in. */
818 	HPI_CHANNEL_MODE_LEFT_TO_STEREO = 3,
819 /** Left channel out = right channel in, Right channel out = right channel in.*/
820 	HPI_CHANNEL_MODE_RIGHT_TO_STEREO = 4,
821 /** Left channel out = (left channel in + right channel in)/2,
822     Right channel out = mute. */
823 	HPI_CHANNEL_MODE_STEREO_TO_LEFT = 5,
824 /** Left channel out = mute,
825     Right channel out = (right channel in + left channel in)/2. */
826 	HPI_CHANNEL_MODE_STEREO_TO_RIGHT = 6,
827 	HPI_CHANNEL_MODE_LAST = 6
828 };
829 
830 /** SampleClock source values
831 \ingroup sampleclock
832 */
833 enum HPI_SAMPLECLOCK_SOURCES {
834 /** The sampleclock output is derived from its local samplerate generator.
835     The local samplerate may be set using HPI_SampleClock_SetLocalRate(). */
836 	HPI_SAMPLECLOCK_SOURCE_LOCAL = 1,
837 /** The adapter is clocked from a dedicated AES/EBU SampleClock input.*/
838 	HPI_SAMPLECLOCK_SOURCE_AESEBU_SYNC = 2,
839 /** From external wordclock connector */
840 	HPI_SAMPLECLOCK_SOURCE_WORD = 3,
841 /** Board-to-board header */
842 	HPI_SAMPLECLOCK_SOURCE_WORD_HEADER = 4,
843 /** FUTURE - SMPTE clock. */
844 	HPI_SAMPLECLOCK_SOURCE_SMPTE = 5,
845 /** One of the aesebu inputs */
846 	HPI_SAMPLECLOCK_SOURCE_AESEBU_INPUT = 6,
847 /** From a network interface e.g. Cobranet or Livewire at either 48 or 96kHz */
848 	HPI_SAMPLECLOCK_SOURCE_NETWORK = 8,
849 /** From previous adjacent module (ASI2416 only)*/
850 	HPI_SAMPLECLOCK_SOURCE_PREV_MODULE = 10,
851 /** Blu link sample clock*/
852 	HPI_SAMPLECLOCK_SOURCE_BLULINK = 11,
853 /*! Update this if you add a new clock source.*/
854 	HPI_SAMPLECLOCK_SOURCE_LAST = 11
855 };
856 
857 /** Equalizer filter types. Used by HPI_ParametricEq_SetBand()
858 \ingroup parmeq
859 */
860 enum HPI_FILTER_TYPE {
861 	HPI_FILTER_TYPE_BYPASS = 0,	/**< filter is turned off */
862 
863 	HPI_FILTER_TYPE_LOWSHELF = 1,	/**< EQ low shelf */
864 	HPI_FILTER_TYPE_HIGHSHELF = 2,	/**< EQ high shelf */
865 	HPI_FILTER_TYPE_EQ_BAND = 3,	/**< EQ gain */
866 
867 	HPI_FILTER_TYPE_LOWPASS = 4,	/**< standard low pass */
868 	HPI_FILTER_TYPE_HIGHPASS = 5,	/**< standard high pass */
869 	HPI_FILTER_TYPE_BANDPASS = 6,	/**< standard band pass */
870 	HPI_FILTER_TYPE_BANDSTOP = 7	/**< standard band stop/notch */
871 };
872 
873 /** Async Event sources
874 \ingroup async
875 */
876 enum ASYNC_EVENT_SOURCES {
877 	HPI_ASYNC_EVENT_GPIO = 1,	/**< GPIO event. */
878 	HPI_ASYNC_EVENT_SILENCE = 2,	/**< silence event detected. */
879 	HPI_ASYNC_EVENT_TONE = 3	/**< tone event detected. */
880 };
881 /*******************************************/
882 /** HPI Error codes
883 
884 Almost all HPI functions return an error code
885 A return value of zero means there was no error.
886 Otherwise one of these error codes is returned.
887 Error codes can be converted to a descriptive string using HPI_GetErrorText()
888 
889 \note When a new error code is added HPI_GetErrorText() MUST be updated.
890 \note Codes 1-100 are reserved for driver use
891 \ingroup utility
892 */
893 enum HPI_ERROR_CODES {
894 	/** Message type does not exist. */
895 	HPI_ERROR_INVALID_TYPE = 100,
896 	/** Object type does not exist. */
897 	HPI_ERROR_INVALID_OBJ = 101,
898 	/** Function does not exist. */
899 	HPI_ERROR_INVALID_FUNC = 102,
900 	/** The specified object does not exist. */
901 	HPI_ERROR_INVALID_OBJ_INDEX = 103,
902 	/** Trying to access an object that has not been opened yet. */
903 	HPI_ERROR_OBJ_NOT_OPEN = 104,
904 	/** Trying to open an already open object. */
905 	HPI_ERROR_OBJ_ALREADY_OPEN = 105,
906 	/** PCI, ISA resource not valid. */
907 	HPI_ERROR_INVALID_RESOURCE = 106,
908 	/* HPI_ERROR_SUBSYSFINDADAPTERS_GETINFO= 107 */
909 	/** Default response was never updated with actual error code. */
910 	HPI_ERROR_INVALID_RESPONSE = 108,
911 	/** wSize field of response was not updated,
912 	indicating that the message was not processed. */
913 	HPI_ERROR_PROCESSING_MESSAGE = 109,
914 	/** The network did not respond in a timely manner. */
915 	HPI_ERROR_NETWORK_TIMEOUT = 110,
916 	/* An HPI handle is invalid (uninitialised?). */
917 	HPI_ERROR_INVALID_HANDLE = 111,
918 	/** A function or attribute has not been implemented yet. */
919 	HPI_ERROR_UNIMPLEMENTED = 112,
920 	/** There are too many clients attempting
921 	    to access a network resource. */
922 	HPI_ERROR_NETWORK_TOO_MANY_CLIENTS = 113,
923 	/** Response buffer passed to HPI_Message
924 	    was smaller than returned response.
925 	    wSpecificError field of hpi response contains the required size.
926 	*/
927 	HPI_ERROR_RESPONSE_BUFFER_TOO_SMALL = 114,
928 	/** The returned response did not match the sent message */
929 	HPI_ERROR_RESPONSE_MISMATCH = 115,
930 	/** A control setting that should have been cached was not. */
931 	HPI_ERROR_CONTROL_CACHING = 116,
932 	/** A message buffer in the path to the adapter was smaller
933 	    than the message size.
934 	    wSpecificError field of hpi response contains the actual size.
935 	*/
936 	HPI_ERROR_MESSAGE_BUFFER_TOO_SMALL = 117,
937 
938 	/* HPI_ERROR_TOO_MANY_ADAPTERS= 200 */
939 	/** Bad adpater. */
940 	HPI_ERROR_BAD_ADAPTER = 201,
941 	/** Adapter number out of range or not set properly. */
942 	HPI_ERROR_BAD_ADAPTER_NUMBER = 202,
943 	/** 2 adapters with the same adapter number. */
944 	HPI_ERROR_DUPLICATE_ADAPTER_NUMBER = 203,
945 	/** DSP code failed to bootload. Usually a DSP memory test failure. */
946 	HPI_ERROR_DSP_BOOTLOAD = 204,
947 	/** Couldn't find or open the DSP code file. */
948 	HPI_ERROR_DSP_FILE_NOT_FOUND = 206,
949 	/** Internal DSP hardware error. */
950 	HPI_ERROR_DSP_HARDWARE = 207,
951 	/** Could not allocate memory */
952 	HPI_ERROR_MEMORY_ALLOC = 208,
953 	/** Failed to correctly load/config PLD. (unused) */
954 	HPI_ERROR_PLD_LOAD = 209,
955 	/** Unexpected end of file, block length too big etc. */
956 	HPI_ERROR_DSP_FILE_FORMAT = 210,
957 
958 	/** Found but could not open DSP code file. */
959 	HPI_ERROR_DSP_FILE_ACCESS_DENIED = 211,
960 	/** First DSP code section header not found in DSP file. */
961 	HPI_ERROR_DSP_FILE_NO_HEADER = 212,
962 	/* HPI_ERROR_DSP_FILE_READ_ERROR= 213, */
963 	/** DSP code for adapter family not found. */
964 	HPI_ERROR_DSP_SECTION_NOT_FOUND = 214,
965 	/** Other OS specific error opening DSP file. */
966 	HPI_ERROR_DSP_FILE_OTHER_ERROR = 215,
967 	/** Sharing violation opening DSP code file. */
968 	HPI_ERROR_DSP_FILE_SHARING_VIOLATION = 216,
969 	/** DSP code section header had size == 0. */
970 	HPI_ERROR_DSP_FILE_NULL_HEADER = 217,
971 
972 	/* HPI_ERROR_FLASH = 220, */
973 
974 	/** Flash has bad checksum */
975 	HPI_ERROR_BAD_CHECKSUM = 221,
976 	HPI_ERROR_BAD_SEQUENCE = 222,
977 	HPI_ERROR_FLASH_ERASE = 223,
978 	HPI_ERROR_FLASH_PROGRAM = 224,
979 	HPI_ERROR_FLASH_VERIFY = 225,
980 	HPI_ERROR_FLASH_TYPE = 226,
981 	HPI_ERROR_FLASH_START = 227,
982 	HPI_ERROR_FLASH_READ = 228,
983 	HPI_ERROR_FLASH_READ_NO_FILE = 229,
984 	HPI_ERROR_FLASH_SIZE = 230,
985 
986 	/** Reserved for OEMs. */
987 	HPI_ERROR_RESERVED_1 = 290,
988 
989 	/* HPI_ERROR_INVALID_STREAM = 300 use HPI_ERROR_INVALID_OBJ_INDEX */
990 	/** Invalid compression format. */
991 	HPI_ERROR_INVALID_FORMAT = 301,
992 	/** Invalid format samplerate */
993 	HPI_ERROR_INVALID_SAMPLERATE = 302,
994 	/** Invalid format number of channels. */
995 	HPI_ERROR_INVALID_CHANNELS = 303,
996 	/** Invalid format bitrate. */
997 	HPI_ERROR_INVALID_BITRATE = 304,
998 	/** Invalid datasize used for stream read/write. */
999 	HPI_ERROR_INVALID_DATASIZE = 305,
1000 	/* HPI_ERROR_BUFFER_FULL = 306 use HPI_ERROR_INVALID_DATASIZE */
1001 	/* HPI_ERROR_BUFFER_EMPTY = 307 use HPI_ERROR_INVALID_DATASIZE */
1002 	/** Null data pointer used for stream read/write. */
1003 	HPI_ERROR_INVALID_DATA_POINTER = 308,
1004 	/** Packet ordering error for stream read/write. */
1005 	HPI_ERROR_INVALID_PACKET_ORDER = 309,
1006 
1007 	/** Object can't do requested operation in its current
1008 	    state, eg set format, change rec mux state while recording.*/
1009 	HPI_ERROR_INVALID_OPERATION = 310,
1010 
1011 	/** Where a SRG is shared amongst streams, an incompatible samplerate
1012 	    is one that is different to any currently active stream. */
1013 	HPI_ERROR_INCOMPATIBLE_SAMPLERATE = 311,
1014 	/** Adapter mode is illegal.*/
1015 	HPI_ERROR_BAD_ADAPTER_MODE = 312,
1016 
1017 	/** There have been too many attempts to set the adapter's
1018 	capabilities (using bad keys), the card should be returned
1019 	to ASI if further capabilities updates are required */
1020 	HPI_ERROR_TOO_MANY_CAPABILITY_CHANGE_ATTEMPTS = 313,
1021 	/** Streams on different adapters cannot be grouped. */
1022 	HPI_ERROR_NO_INTERADAPTER_GROUPS = 314,
1023 	/** Streams on different DSPs cannot be grouped. */
1024 	HPI_ERROR_NO_INTERDSP_GROUPS = 315,
1025 	/** Stream wait cancelled before threshold reached. */
1026 	HPI_ERROR_WAIT_CANCELLED = 316,
1027 	/** A character string is invalid. */
1028 	HPI_ERROR_INVALID_STRING = 317,
1029 
1030 	/** Invalid mixer node for this adapter. */
1031 	HPI_ERROR_INVALID_NODE = 400,
1032 	/** Invalid control. */
1033 	HPI_ERROR_INVALID_CONTROL = 401,
1034 	/** Invalid control value was passed. */
1035 	HPI_ERROR_INVALID_CONTROL_VALUE = 402,
1036 	/** Control attribute not supported by this control. */
1037 	HPI_ERROR_INVALID_CONTROL_ATTRIBUTE = 403,
1038 	/** Control is disabled. */
1039 	HPI_ERROR_CONTROL_DISABLED = 404,
1040 	/** I2C transaction failed due to a missing ACK. */
1041 	HPI_ERROR_CONTROL_I2C_MISSING_ACK = 405,
1042 	HPI_ERROR_I2C_MISSING_ACK = 405,
1043 	/** Control is busy, or coming out of
1044 	reset and cannot be accessed at this time. */
1045 	HPI_ERROR_CONTROL_NOT_READY = 407,
1046 
1047 	/** Non volatile memory */
1048 	HPI_ERROR_NVMEM_BUSY = 450,
1049 	HPI_ERROR_NVMEM_FULL = 451,
1050 	HPI_ERROR_NVMEM_FAIL = 452,
1051 
1052 	/** I2C */
1053 	HPI_ERROR_I2C_BAD_ADR = 460,
1054 
1055 	/** Entity type did not match requested type */
1056 	HPI_ERROR_ENTITY_TYPE_MISMATCH = 470,
1057 	/** Entity item count did not match requested count */
1058 	HPI_ERROR_ENTITY_ITEM_COUNT = 471,
1059 	/** Entity type is not one of the valid types */
1060 	HPI_ERROR_ENTITY_TYPE_INVALID = 472,
1061 	/** Entity role is not one of the valid roles */
1062 	HPI_ERROR_ENTITY_ROLE_INVALID = 473,
1063 	/** Entity size doesn't match target size */
1064 	HPI_ERROR_ENTITY_SIZE_MISMATCH = 474,
1065 
1066 	/* AES18 specific errors were 500..507 */
1067 
1068 	/** custom error to use for debugging */
1069 	HPI_ERROR_CUSTOM = 600,
1070 
1071 	/** hpioct32.c can't obtain mutex */
1072 	HPI_ERROR_MUTEX_TIMEOUT = 700,
1073 
1074 	/** Backend errors used to be greater than this.
1075 	    \deprecated Now, all backends return only errors defined here in hpi.h
1076 	*/
1077 	HPI_ERROR_BACKEND_BASE = 900,
1078 
1079 	/** Communication with DSP failed */
1080 	HPI_ERROR_DSP_COMMUNICATION = 900
1081 		/* Note that the dsp communication error is set to this value so that
1082 		   it remains compatible with any software that expects such errors
1083 		   to be backend errors i.e. >= 900.
1084 		   Do not define any new error codes with values > 900.
1085 		 */
1086 };
1087 
1088 /** \defgroup maximums HPI maximum values
1089 \{
1090 */
1091 /** Maximum number of PCI HPI adapters */
1092 #define HPI_MAX_ADAPTERS                20
1093 /** Maximum number of in or out streams per adapter */
1094 #define HPI_MAX_STREAMS                 16
1095 #define HPI_MAX_CHANNELS                2	/* per stream */
1096 #define HPI_MAX_NODES                   8	/* per mixer ? */
1097 #define HPI_MAX_CONTROLS                4	/* per node ? */
1098 /** maximum number of ancillary bytes per MPEG frame */
1099 #define HPI_MAX_ANC_BYTES_PER_FRAME     (64)
1100 #define HPI_STRING_LEN                  16
1101 
1102 /** Networked adapters have index >= 100 */
1103 #define HPI_MIN_NETWORK_ADAPTER_IDX 100
1104 
1105 /** Velocity units */
1106 #define HPI_OSTREAM_VELOCITY_UNITS      4096
1107 /** OutStream timescale units */
1108 #define HPI_OSTREAM_TIMESCALE_UNITS     10000
1109 /** OutStream timescale passthrough - turns timescaling on in passthough mode */
1110 #define HPI_OSTREAM_TIMESCALE_PASSTHROUGH       99999
1111 
1112 /**\}*/
1113 
1114 /**************/
1115 /* STRUCTURES */
1116 #ifndef DISABLE_PRAGMA_PACK1
1117 #pragma pack(push, 1)
1118 #endif
1119 
1120 /** Structure containing sample format information.
1121     See also HPI_FormatCreate().
1122   */
1123 struct hpi_format {
1124 	u32 sample_rate;
1125 				/**< 11025, 32000, 44100 ... */
1126 	u32 bit_rate;		  /**< for MPEG */
1127 	u32 attributes;
1128 				/**< Stereo/JointStereo/Mono */
1129 	u16 mode_legacy;
1130 				/**< Legacy ancillary mode or idle bit  */
1131 	u16 unused;		  /**< Unused */
1132 	u16 channels;	  /**< 1,2..., (or ancillary mode or idle bit */
1133 	u16 format;	  /**< HPI_FORMAT_PCM16, _MPEG etc. see #HPI_FORMATS. */
1134 };
1135 
1136 struct hpi_anc_frame {
1137 	u32 valid_bits_in_this_frame;
1138 	u8 b_data[HPI_MAX_ANC_BYTES_PER_FRAME];
1139 };
1140 
1141 /** An object for containing a single async event.
1142 */
1143 struct hpi_async_event {
1144 	u16 event_type;	/**< type of event. \sa async_event  */
1145 	u16 sequence; /**< Sequence number, allows lost event detection */
1146 	u32 state; /**< New state */
1147 	u32 h_object; /**< handle to the object returning the event. */
1148 	union {
1149 		struct {
1150 			u16 index; /**< GPIO bit index. */
1151 		} gpio;
1152 		struct {
1153 			u16 node_index;	/**< what node is the control on ? */
1154 			u16 node_type; /**< what type of node is the control on ? */
1155 		} control;
1156 	} u;
1157 };
1158 
1159 #ifndef DISABLE_PRAGMA_PACK1
1160 #pragma pack(pop)
1161 #endif
1162 
1163 /*****************/
1164 /* HPI FUNCTIONS */
1165 /*****************/
1166 
1167 /* Stream */
1168 u16 hpi_stream_estimate_buffer_size(struct hpi_format *pF,
1169 	u32 host_polling_rate_in_milli_seconds, u32 *recommended_buffer_size);
1170 
1171 /*************/
1172 /* SubSystem */
1173 /*************/
1174 
1175 u16 hpi_subsys_get_version_ex(u32 *pversion_ex);
1176 
1177 u16 hpi_subsys_get_num_adapters(int *pn_num_adapters);
1178 
1179 u16 hpi_subsys_get_adapter(int iterator, u32 *padapter_index,
1180 	u16 *pw_adapter_type);
1181 
1182 /***********/
1183 /* Adapter */
1184 /***********/
1185 
1186 u16 hpi_adapter_open(u16 adapter_index);
1187 
1188 u16 hpi_adapter_close(u16 adapter_index);
1189 
1190 u16 hpi_adapter_get_info(u16 adapter_index, u16 *pw_num_outstreams,
1191 	u16 *pw_num_instreams, u16 *pw_version, u32 *pserial_number,
1192 	u16 *pw_adapter_type);
1193 
1194 u16 hpi_adapter_get_module_by_index(u16 adapter_index, u16 module_index,
1195 	u16 *pw_num_outputs, u16 *pw_num_inputs, u16 *pw_version,
1196 	u32 *pserial_number, u16 *pw_module_type, u32 *ph_module);
1197 
1198 u16 hpi_adapter_set_mode(u16 adapter_index, u32 adapter_mode);
1199 
1200 u16 hpi_adapter_set_mode_ex(u16 adapter_index, u32 adapter_mode,
1201 	u16 query_or_set);
1202 
1203 u16 hpi_adapter_get_mode(u16 adapter_index, u32 *padapter_mode);
1204 
1205 u16 hpi_adapter_get_assert2(u16 adapter_index, u16 *p_assert_count,
1206 	char *psz_assert, u32 *p_param1, u32 *p_param2,
1207 	u32 *p_dsp_string_addr, u16 *p_processor_id);
1208 
1209 u16 hpi_adapter_test_assert(u16 adapter_index, u16 assert_id);
1210 
1211 u16 hpi_adapter_enable_capability(u16 adapter_index, u16 capability, u32 key);
1212 
1213 u16 hpi_adapter_self_test(u16 adapter_index);
1214 
1215 u16 hpi_adapter_debug_read(u16 adapter_index, u32 dsp_address, char *p_bytes,
1216 	int *count_bytes);
1217 
1218 u16 hpi_adapter_set_property(u16 adapter_index, u16 property, u16 paramter1,
1219 	u16 paramter2);
1220 
1221 u16 hpi_adapter_get_property(u16 adapter_index, u16 property,
1222 	u16 *pw_paramter1, u16 *pw_paramter2);
1223 
1224 u16 hpi_adapter_enumerate_property(u16 adapter_index, u16 index,
1225 	u16 what_to_enumerate, u16 property_index, u32 *psetting);
1226 /*************/
1227 /* OutStream */
1228 /*************/
1229 u16 hpi_outstream_open(u16 adapter_index, u16 outstream_index,
1230 	u32 *ph_outstream);
1231 
1232 u16 hpi_outstream_close(u32 h_outstream);
1233 
1234 u16 hpi_outstream_get_info_ex(u32 h_outstream, u16 *pw_state,
1235 	u32 *pbuffer_size, u32 *pdata_to_play, u32 *psamples_played,
1236 	u32 *pauxiliary_data_to_play);
1237 
1238 u16 hpi_outstream_write_buf(u32 h_outstream, const u8 *pb_write_buf,
1239 	u32 bytes_to_write, const struct hpi_format *p_format);
1240 
1241 u16 hpi_outstream_start(u32 h_outstream);
1242 
1243 u16 hpi_outstream_wait_start(u32 h_outstream);
1244 
1245 u16 hpi_outstream_stop(u32 h_outstream);
1246 
1247 u16 hpi_outstream_sinegen(u32 h_outstream);
1248 
1249 u16 hpi_outstream_reset(u32 h_outstream);
1250 
1251 u16 hpi_outstream_query_format(u32 h_outstream, struct hpi_format *p_format);
1252 
1253 u16 hpi_outstream_set_format(u32 h_outstream, struct hpi_format *p_format);
1254 
1255 u16 hpi_outstream_set_punch_in_out(u32 h_outstream, u32 punch_in_sample,
1256 	u32 punch_out_sample);
1257 
1258 u16 hpi_outstream_set_velocity(u32 h_outstream, short velocity);
1259 
1260 u16 hpi_outstream_ancillary_reset(u32 h_outstream, u16 mode);
1261 
1262 u16 hpi_outstream_ancillary_get_info(u32 h_outstream, u32 *pframes_available);
1263 
1264 u16 hpi_outstream_ancillary_read(u32 h_outstream,
1265 	struct hpi_anc_frame *p_anc_frame_buffer,
1266 	u32 anc_frame_buffer_size_in_bytes,
1267 	u32 number_of_ancillary_frames_to_read);
1268 
1269 u16 hpi_outstream_set_time_scale(u32 h_outstream, u32 time_scaleX10000);
1270 
1271 u16 hpi_outstream_host_buffer_allocate(u32 h_outstream, u32 size_in_bytes);
1272 
1273 u16 hpi_outstream_host_buffer_free(u32 h_outstream);
1274 
1275 u16 hpi_outstream_group_add(u32 h_outstream, u32 h_stream);
1276 
1277 u16 hpi_outstream_group_get_map(u32 h_outstream, u32 *poutstream_map,
1278 	u32 *pinstream_map);
1279 
1280 u16 hpi_outstream_group_reset(u32 h_outstream);
1281 
1282 /************/
1283 /* InStream */
1284 /************/
1285 u16 hpi_instream_open(u16 adapter_index, u16 instream_index,
1286 	u32 *ph_instream);
1287 
1288 u16 hpi_instream_close(u32 h_instream);
1289 
1290 u16 hpi_instream_query_format(u32 h_instream,
1291 	const struct hpi_format *p_format);
1292 
1293 u16 hpi_instream_set_format(u32 h_instream,
1294 	const struct hpi_format *p_format);
1295 
1296 u16 hpi_instream_read_buf(u32 h_instream, u8 *pb_read_buf, u32 bytes_to_read);
1297 
1298 u16 hpi_instream_start(u32 h_instream);
1299 
1300 u16 hpi_instream_wait_start(u32 h_instream);
1301 
1302 u16 hpi_instream_stop(u32 h_instream);
1303 
1304 u16 hpi_instream_reset(u32 h_instream);
1305 
1306 u16 hpi_instream_get_info_ex(u32 h_instream, u16 *pw_state, u32 *pbuffer_size,
1307 	u32 *pdata_recorded, u32 *psamples_recorded,
1308 	u32 *pauxiliary_data_recorded);
1309 
1310 u16 hpi_instream_ancillary_reset(u32 h_instream, u16 bytes_per_frame,
1311 	u16 mode, u16 alignment, u16 idle_bit);
1312 
1313 u16 hpi_instream_ancillary_get_info(u32 h_instream, u32 *pframe_space);
1314 
1315 u16 hpi_instream_ancillary_write(u32 h_instream,
1316 	const struct hpi_anc_frame *p_anc_frame_buffer,
1317 	u32 anc_frame_buffer_size_in_bytes,
1318 	u32 number_of_ancillary_frames_to_write);
1319 
1320 u16 hpi_instream_host_buffer_allocate(u32 h_instream, u32 size_in_bytes);
1321 
1322 u16 hpi_instream_host_buffer_free(u32 h_instream);
1323 
1324 u16 hpi_instream_group_add(u32 h_instream, u32 h_stream);
1325 
1326 u16 hpi_instream_group_get_map(u32 h_instream, u32 *poutstream_map,
1327 	u32 *pinstream_map);
1328 
1329 u16 hpi_instream_group_reset(u32 h_instream);
1330 
1331 /*********/
1332 /* Mixer */
1333 /*********/
1334 u16 hpi_mixer_open(u16 adapter_index, u32 *ph_mixer);
1335 
1336 u16 hpi_mixer_close(u32 h_mixer);
1337 
1338 u16 hpi_mixer_get_control(u32 h_mixer, u16 src_node_type,
1339 	u16 src_node_type_index, u16 dst_node_type, u16 dst_node_type_index,
1340 	u16 control_type, u32 *ph_control);
1341 
1342 u16 hpi_mixer_get_control_by_index(u32 h_mixer, u16 control_index,
1343 	u16 *pw_src_node_type, u16 *pw_src_node_index, u16 *pw_dst_node_type,
1344 	u16 *pw_dst_node_index, u16 *pw_control_type, u32 *ph_control);
1345 
1346 u16 hpi_mixer_store(u32 h_mixer, enum HPI_MIXER_STORE_COMMAND command,
1347 	u16 index);
1348 /************/
1349 /* Controls */
1350 /************/
1351 /******************/
1352 /* Volume control */
1353 /******************/
1354 u16 hpi_volume_set_gain(u32 h_control, short an_gain0_01dB[HPI_MAX_CHANNELS]
1355 	);
1356 
1357 u16 hpi_volume_get_gain(u32 h_control,
1358 	short an_gain0_01dB_out[HPI_MAX_CHANNELS]
1359 	);
1360 
1361 u16 hpi_volume_set_mute(u32 h_control, u32 mute);
1362 
1363 u16 hpi_volume_get_mute(u32 h_control, u32 *mute);
1364 
1365 #define hpi_volume_get_range hpi_volume_query_range
1366 u16 hpi_volume_query_range(u32 h_control, short *min_gain_01dB,
1367 	short *max_gain_01dB, short *step_gain_01dB);
1368 
1369 u16 hpi_volume_query_channels(const u32 h_control, u32 *p_channels);
1370 
1371 u16 hpi_volume_auto_fade(u32 h_control,
1372 	short an_stop_gain0_01dB[HPI_MAX_CHANNELS], u32 duration_ms);
1373 
1374 u16 hpi_volume_auto_fade_profile(u32 h_control,
1375 	short an_stop_gain0_01dB[HPI_MAX_CHANNELS], u32 duration_ms,
1376 	u16 profile);
1377 
1378 u16 hpi_volume_query_auto_fade_profile(const u32 h_control, const u32 i,
1379 	u16 *profile);
1380 
1381 /*****************/
1382 /* Level control */
1383 /*****************/
1384 u16 hpi_level_query_range(u32 h_control, short *min_gain_01dB,
1385 	short *max_gain_01dB, short *step_gain_01dB);
1386 
1387 u16 hpi_level_set_gain(u32 h_control, short an_gain0_01dB[HPI_MAX_CHANNELS]
1388 	);
1389 
1390 u16 hpi_level_get_gain(u32 h_control,
1391 	short an_gain0_01dB_out[HPI_MAX_CHANNELS]
1392 	);
1393 
1394 /*****************/
1395 /* Meter control */
1396 /*****************/
1397 u16 hpi_meter_query_channels(const u32 h_meter, u32 *p_channels);
1398 
1399 u16 hpi_meter_get_peak(u32 h_control,
1400 	short an_peak0_01dB_out[HPI_MAX_CHANNELS]
1401 	);
1402 
1403 u16 hpi_meter_get_rms(u32 h_control, short an_peak0_01dB_out[HPI_MAX_CHANNELS]
1404 	);
1405 
1406 u16 hpi_meter_set_peak_ballistics(u32 h_control, u16 attack, u16 decay);
1407 
1408 u16 hpi_meter_set_rms_ballistics(u32 h_control, u16 attack, u16 decay);
1409 
1410 u16 hpi_meter_get_peak_ballistics(u32 h_control, u16 *attack, u16 *decay);
1411 
1412 u16 hpi_meter_get_rms_ballistics(u32 h_control, u16 *attack, u16 *decay);
1413 
1414 /************************/
1415 /* ChannelMode control */
1416 /************************/
1417 u16 hpi_channel_mode_query_mode(const u32 h_mode, const u32 index,
1418 	u16 *pw_mode);
1419 
1420 u16 hpi_channel_mode_set(u32 h_control, u16 mode);
1421 
1422 u16 hpi_channel_mode_get(u32 h_control, u16 *mode);
1423 
1424 /*****************/
1425 /* Tuner control */
1426 /*****************/
1427 u16 hpi_tuner_query_band(const u32 h_tuner, const u32 index, u16 *pw_band);
1428 
1429 u16 hpi_tuner_set_band(u32 h_control, u16 band);
1430 
1431 u16 hpi_tuner_get_band(u32 h_control, u16 *pw_band);
1432 
1433 u16 hpi_tuner_query_frequency(const u32 h_tuner, const u32 index,
1434 	const u16 band, u32 *pfreq);
1435 
1436 u16 hpi_tuner_set_frequency(u32 h_control, u32 freq_ink_hz);
1437 
1438 u16 hpi_tuner_get_frequency(u32 h_control, u32 *pw_freq_ink_hz);
1439 
1440 u16 hpi_tuner_get_rf_level(u32 h_control, short *pw_level);
1441 
1442 u16 hpi_tuner_get_raw_rf_level(u32 h_control, short *pw_level);
1443 
1444 u16 hpi_tuner_query_gain(const u32 h_tuner, const u32 index, u16 *pw_gain);
1445 
1446 u16 hpi_tuner_set_gain(u32 h_control, short gain);
1447 
1448 u16 hpi_tuner_get_gain(u32 h_control, short *pn_gain);
1449 
1450 u16 hpi_tuner_get_status(u32 h_control, u16 *pw_status_mask, u16 *pw_status);
1451 
1452 u16 hpi_tuner_set_mode(u32 h_control, u32 mode, u32 value);
1453 
1454 u16 hpi_tuner_get_mode(u32 h_control, u32 mode, u32 *pn_value);
1455 
1456 u16 hpi_tuner_get_rds(u32 h_control, char *p_rds_data);
1457 
1458 u16 hpi_tuner_query_deemphasis(const u32 h_tuner, const u32 index,
1459 	const u16 band, u32 *pdeemphasis);
1460 
1461 u16 hpi_tuner_set_deemphasis(u32 h_control, u32 deemphasis);
1462 u16 hpi_tuner_get_deemphasis(u32 h_control, u32 *pdeemphasis);
1463 
1464 u16 hpi_tuner_query_program(const u32 h_tuner, u32 *pbitmap_program);
1465 
1466 u16 hpi_tuner_set_program(u32 h_control, u32 program);
1467 
1468 u16 hpi_tuner_get_program(u32 h_control, u32 *pprogram);
1469 
1470 u16 hpi_tuner_get_hd_radio_dsp_version(u32 h_control, char *psz_dsp_version,
1471 	const u32 string_size);
1472 
1473 u16 hpi_tuner_get_hd_radio_sdk_version(u32 h_control, char *psz_sdk_version,
1474 	const u32 string_size);
1475 
1476 u16 hpi_tuner_get_hd_radio_signal_quality(u32 h_control, u32 *pquality);
1477 
1478 u16 hpi_tuner_get_hd_radio_signal_blend(u32 h_control, u32 *pblend);
1479 
1480 u16 hpi_tuner_set_hd_radio_signal_blend(u32 h_control, const u32 blend);
1481 
1482 /***************/
1483 /* PAD control */
1484 /***************/
1485 
1486 u16 hpi_pad_get_channel_name(u32 h_control, char *psz_string,
1487 	const u32 string_length);
1488 
1489 u16 hpi_pad_get_artist(u32 h_control, char *psz_string,
1490 	const u32 string_length);
1491 
1492 u16 hpi_pad_get_title(u32 h_control, char *psz_string,
1493 	const u32 string_length);
1494 
1495 u16 hpi_pad_get_comment(u32 h_control, char *psz_string,
1496 	const u32 string_length);
1497 
1498 u16 hpi_pad_get_program_type(u32 h_control, u32 *ppTY);
1499 
1500 u16 hpi_pad_get_rdsPI(u32 h_control, u32 *ppI);
1501 
1502 u16 hpi_pad_get_program_type_string(u32 h_control, const u32 data_type,
1503 	const u32 pTY, char *psz_string, const u32 string_length);
1504 
1505 /****************************/
1506 /* AES/EBU Receiver control */
1507 /****************************/
1508 u16 hpi_aesebu_receiver_query_format(const u32 h_aes_rx, const u32 index,
1509 	u16 *pw_format);
1510 
1511 u16 hpi_aesebu_receiver_set_format(u32 h_control, u16 source);
1512 
1513 u16 hpi_aesebu_receiver_get_format(u32 h_control, u16 *pw_source);
1514 
1515 u16 hpi_aesebu_receiver_get_sample_rate(u32 h_control, u32 *psample_rate);
1516 
1517 u16 hpi_aesebu_receiver_get_user_data(u32 h_control, u16 index, u16 *pw_data);
1518 
1519 u16 hpi_aesebu_receiver_get_channel_status(u32 h_control, u16 index,
1520 	u16 *pw_data);
1521 
1522 u16 hpi_aesebu_receiver_get_error_status(u32 h_control, u16 *pw_error_data);
1523 
1524 /*******************************/
1525 /* AES/EBU Transmitter control */
1526 /*******************************/
1527 u16 hpi_aesebu_transmitter_set_sample_rate(u32 h_control, u32 sample_rate);
1528 
1529 u16 hpi_aesebu_transmitter_set_user_data(u32 h_control, u16 index, u16 data);
1530 
1531 u16 hpi_aesebu_transmitter_set_channel_status(u32 h_control, u16 index,
1532 	u16 data);
1533 
1534 u16 hpi_aesebu_transmitter_get_channel_status(u32 h_control, u16 index,
1535 	u16 *pw_data);
1536 
1537 u16 hpi_aesebu_transmitter_query_format(const u32 h_aes_tx, const u32 index,
1538 	u16 *pw_format);
1539 
1540 u16 hpi_aesebu_transmitter_set_format(u32 h_control, u16 output_format);
1541 
1542 u16 hpi_aesebu_transmitter_get_format(u32 h_control, u16 *pw_output_format);
1543 
1544 /***********************/
1545 /* Multiplexer control */
1546 /***********************/
1547 u16 hpi_multiplexer_set_source(u32 h_control, u16 source_node_type,
1548 	u16 source_node_index);
1549 
1550 u16 hpi_multiplexer_get_source(u32 h_control, u16 *source_node_type,
1551 	u16 *source_node_index);
1552 
1553 u16 hpi_multiplexer_query_source(u32 h_control, u16 index,
1554 	u16 *source_node_type, u16 *source_node_index);
1555 
1556 /***************/
1557 /* Vox control */
1558 /***************/
1559 u16 hpi_vox_set_threshold(u32 h_control, short an_gain0_01dB);
1560 
1561 u16 hpi_vox_get_threshold(u32 h_control, short *an_gain0_01dB);
1562 
1563 /*********************/
1564 /* Bitstream control */
1565 /*********************/
1566 u16 hpi_bitstream_set_clock_edge(u32 h_control, u16 edge_type);
1567 
1568 u16 hpi_bitstream_set_data_polarity(u32 h_control, u16 polarity);
1569 
1570 u16 hpi_bitstream_get_activity(u32 h_control, u16 *pw_clk_activity,
1571 	u16 *pw_data_activity);
1572 
1573 /***********************/
1574 /* SampleClock control */
1575 /***********************/
1576 
1577 u16 hpi_sample_clock_query_source(const u32 h_clock, const u32 index,
1578 	u16 *pw_source);
1579 
1580 u16 hpi_sample_clock_set_source(u32 h_control, u16 source);
1581 
1582 u16 hpi_sample_clock_get_source(u32 h_control, u16 *pw_source);
1583 
1584 u16 hpi_sample_clock_query_source_index(const u32 h_clock, const u32 index,
1585 	const u32 source, u16 *pw_source_index);
1586 
1587 u16 hpi_sample_clock_set_source_index(u32 h_control, u16 source_index);
1588 
1589 u16 hpi_sample_clock_get_source_index(u32 h_control, u16 *pw_source_index);
1590 
1591 u16 hpi_sample_clock_get_sample_rate(u32 h_control, u32 *psample_rate);
1592 
1593 u16 hpi_sample_clock_query_local_rate(const u32 h_clock, const u32 index,
1594 	u32 *psource);
1595 
1596 u16 hpi_sample_clock_set_local_rate(u32 h_control, u32 sample_rate);
1597 
1598 u16 hpi_sample_clock_get_local_rate(u32 h_control, u32 *psample_rate);
1599 
1600 u16 hpi_sample_clock_set_auto(u32 h_control, u32 enable);
1601 
1602 u16 hpi_sample_clock_get_auto(u32 h_control, u32 *penable);
1603 
1604 u16 hpi_sample_clock_set_local_rate_lock(u32 h_control, u32 lock);
1605 
1606 u16 hpi_sample_clock_get_local_rate_lock(u32 h_control, u32 *plock);
1607 
1608 /***********************/
1609 /* Microphone control */
1610 /***********************/
1611 u16 hpi_microphone_set_phantom_power(u32 h_control, u16 on_off);
1612 
1613 u16 hpi_microphone_get_phantom_power(u32 h_control, u16 *pw_on_off);
1614 
1615 /********************************/
1616 /* Parametric Equalizer control */
1617 /********************************/
1618 u16 hpi_parametric_eq_get_info(u32 h_control, u16 *pw_number_of_bands,
1619 	u16 *pw_enabled);
1620 
1621 u16 hpi_parametric_eq_set_state(u32 h_control, u16 on_off);
1622 
1623 u16 hpi_parametric_eq_set_band(u32 h_control, u16 index, u16 type,
1624 	u32 frequency_hz, short q100, short gain0_01dB);
1625 
1626 u16 hpi_parametric_eq_get_band(u32 h_control, u16 index, u16 *pn_type,
1627 	u32 *pfrequency_hz, short *pnQ100, short *pn_gain0_01dB);
1628 
1629 u16 hpi_parametric_eq_get_coeffs(u32 h_control, u16 index, short coeffs[5]
1630 	);
1631 
1632 /*******************************/
1633 /* Compressor Expander control */
1634 /*******************************/
1635 
1636 u16 hpi_compander_set_enable(u32 h_control, u32 on);
1637 
1638 u16 hpi_compander_get_enable(u32 h_control, u32 *pon);
1639 
1640 u16 hpi_compander_set_makeup_gain(u32 h_control, short makeup_gain0_01dB);
1641 
1642 u16 hpi_compander_get_makeup_gain(u32 h_control, short *pn_makeup_gain0_01dB);
1643 
1644 u16 hpi_compander_set_attack_time_constant(u32 h_control, u32 index,
1645 	u32 attack);
1646 
1647 u16 hpi_compander_get_attack_time_constant(u32 h_control, u32 index,
1648 	u32 *pw_attack);
1649 
1650 u16 hpi_compander_set_decay_time_constant(u32 h_control, u32 index,
1651 	u32 decay);
1652 
1653 u16 hpi_compander_get_decay_time_constant(u32 h_control, u32 index,
1654 	u32 *pw_decay);
1655 
1656 u16 hpi_compander_set_threshold(u32 h_control, u32 index,
1657 	short threshold0_01dB);
1658 
1659 u16 hpi_compander_get_threshold(u32 h_control, u32 index,
1660 	short *pn_threshold0_01dB);
1661 
1662 u16 hpi_compander_set_ratio(u32 h_control, u32 index, u32 ratio100);
1663 
1664 u16 hpi_compander_get_ratio(u32 h_control, u32 index, u32 *pw_ratio100);
1665 
1666 /********************/
1667 /* Cobranet control */
1668 /********************/
1669 u16 hpi_cobranet_hmi_write(u32 h_control, u32 hmi_address, u32 byte_count,
1670 	u8 *pb_data);
1671 
1672 u16 hpi_cobranet_hmi_read(u32 h_control, u32 hmi_address, u32 max_byte_count,
1673 	u32 *pbyte_count, u8 *pb_data);
1674 
1675 u16 hpi_cobranet_hmi_get_status(u32 h_control, u32 *pstatus,
1676 	u32 *preadable_size, u32 *pwriteable_size);
1677 
1678 u16 hpi_cobranet_get_ip_address(u32 h_control, u32 *pdw_ip_address);
1679 
1680 u16 hpi_cobranet_set_ip_address(u32 h_control, u32 dw_ip_address);
1681 
1682 u16 hpi_cobranet_get_static_ip_address(u32 h_control, u32 *pdw_ip_address);
1683 
1684 u16 hpi_cobranet_set_static_ip_address(u32 h_control, u32 dw_ip_address);
1685 
1686 u16 hpi_cobranet_get_macaddress(u32 h_control, u32 *p_mac_msbs,
1687 	u32 *p_mac_lsbs);
1688 
1689 /*************************/
1690 /* Tone Detector control */
1691 /*************************/
1692 u16 hpi_tone_detector_get_state(u32 hC, u32 *state);
1693 
1694 u16 hpi_tone_detector_set_enable(u32 hC, u32 enable);
1695 
1696 u16 hpi_tone_detector_get_enable(u32 hC, u32 *enable);
1697 
1698 u16 hpi_tone_detector_set_event_enable(u32 hC, u32 event_enable);
1699 
1700 u16 hpi_tone_detector_get_event_enable(u32 hC, u32 *event_enable);
1701 
1702 u16 hpi_tone_detector_set_threshold(u32 hC, int threshold);
1703 
1704 u16 hpi_tone_detector_get_threshold(u32 hC, int *threshold);
1705 
1706 u16 hpi_tone_detector_get_frequency(u32 hC, u32 index, u32 *frequency);
1707 
1708 /****************************/
1709 /* Silence Detector control */
1710 /****************************/
1711 u16 hpi_silence_detector_get_state(u32 hC, u32 *state);
1712 
1713 u16 hpi_silence_detector_set_enable(u32 hC, u32 enable);
1714 
1715 u16 hpi_silence_detector_get_enable(u32 hC, u32 *enable);
1716 
1717 u16 hpi_silence_detector_set_event_enable(u32 hC, u32 event_enable);
1718 
1719 u16 hpi_silence_detector_get_event_enable(u32 hC, u32 *event_enable);
1720 
1721 u16 hpi_silence_detector_set_delay(u32 hC, u32 delay);
1722 
1723 u16 hpi_silence_detector_get_delay(u32 hC, u32 *delay);
1724 
1725 u16 hpi_silence_detector_set_threshold(u32 hC, int threshold);
1726 
1727 u16 hpi_silence_detector_get_threshold(u32 hC, int *threshold);
1728 /*********************/
1729 /* Utility functions */
1730 /*********************/
1731 
1732 u16 hpi_format_create(struct hpi_format *p_format, u16 channels, u16 format,
1733 	u32 sample_rate, u32 bit_rate, u32 attributes);
1734 
1735 #endif	 /*_HPI_H_ */
1736