1 /* 2 * AD1843 low level driver 3 * 4 * Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org> 5 * Copyright 2008 Thomas Bogendoerfer <tsbogend@alpha.franken.de> 6 * 7 * inspired from vwsnd.c (SGI VW audio driver) 8 * Copyright 1999 Silicon Graphics, Inc. All rights reserved. 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or 13 * (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 23 * 24 */ 25 26 #include <linux/init.h> 27 #include <linux/sched.h> 28 #include <linux/errno.h> 29 #include <sound/core.h> 30 #include <sound/pcm.h> 31 #include <sound/ad1843.h> 32 33 /* 34 * AD1843 bitfield definitions. All are named as in the AD1843 data 35 * sheet, with ad1843_ prepended and individual bit numbers removed. 36 * 37 * E.g., bits LSS0 through LSS2 become ad1843_LSS. 38 * 39 * Only the bitfields we need are defined. 40 */ 41 42 struct ad1843_bitfield { 43 char reg; 44 char lo_bit; 45 char nbits; 46 }; 47 48 static const struct ad1843_bitfield 49 ad1843_PDNO = { 0, 14, 1 }, /* Converter Power-Down Flag */ 50 ad1843_INIT = { 0, 15, 1 }, /* Clock Initialization Flag */ 51 ad1843_RIG = { 2, 0, 4 }, /* Right ADC Input Gain */ 52 ad1843_RMGE = { 2, 4, 1 }, /* Right ADC Mic Gain Enable */ 53 ad1843_RSS = { 2, 5, 3 }, /* Right ADC Source Select */ 54 ad1843_LIG = { 2, 8, 4 }, /* Left ADC Input Gain */ 55 ad1843_LMGE = { 2, 12, 1 }, /* Left ADC Mic Gain Enable */ 56 ad1843_LSS = { 2, 13, 3 }, /* Left ADC Source Select */ 57 ad1843_RD2M = { 3, 0, 5 }, /* Right DAC 2 Mix Gain/Atten */ 58 ad1843_RD2MM = { 3, 7, 1 }, /* Right DAC 2 Mix Mute */ 59 ad1843_LD2M = { 3, 8, 5 }, /* Left DAC 2 Mix Gain/Atten */ 60 ad1843_LD2MM = { 3, 15, 1 }, /* Left DAC 2 Mix Mute */ 61 ad1843_RX1M = { 4, 0, 5 }, /* Right Aux 1 Mix Gain/Atten */ 62 ad1843_RX1MM = { 4, 7, 1 }, /* Right Aux 1 Mix Mute */ 63 ad1843_LX1M = { 4, 8, 5 }, /* Left Aux 1 Mix Gain/Atten */ 64 ad1843_LX1MM = { 4, 15, 1 }, /* Left Aux 1 Mix Mute */ 65 ad1843_RX2M = { 5, 0, 5 }, /* Right Aux 2 Mix Gain/Atten */ 66 ad1843_RX2MM = { 5, 7, 1 }, /* Right Aux 2 Mix Mute */ 67 ad1843_LX2M = { 5, 8, 5 }, /* Left Aux 2 Mix Gain/Atten */ 68 ad1843_LX2MM = { 5, 15, 1 }, /* Left Aux 2 Mix Mute */ 69 ad1843_RMCM = { 7, 0, 5 }, /* Right Mic Mix Gain/Atten */ 70 ad1843_RMCMM = { 7, 7, 1 }, /* Right Mic Mix Mute */ 71 ad1843_LMCM = { 7, 8, 5 }, /* Left Mic Mix Gain/Atten */ 72 ad1843_LMCMM = { 7, 15, 1 }, /* Left Mic Mix Mute */ 73 ad1843_HPOS = { 8, 4, 1 }, /* Headphone Output Voltage Swing */ 74 ad1843_HPOM = { 8, 5, 1 }, /* Headphone Output Mute */ 75 ad1843_MPOM = { 8, 6, 1 }, /* Mono Output Mute */ 76 ad1843_RDA1G = { 9, 0, 6 }, /* Right DAC1 Analog/Digital Gain */ 77 ad1843_RDA1GM = { 9, 7, 1 }, /* Right DAC1 Analog Mute */ 78 ad1843_LDA1G = { 9, 8, 6 }, /* Left DAC1 Analog/Digital Gain */ 79 ad1843_LDA1GM = { 9, 15, 1 }, /* Left DAC1 Analog Mute */ 80 ad1843_RDA2G = { 10, 0, 6 }, /* Right DAC2 Analog/Digital Gain */ 81 ad1843_RDA2GM = { 10, 7, 1 }, /* Right DAC2 Analog Mute */ 82 ad1843_LDA2G = { 10, 8, 6 }, /* Left DAC2 Analog/Digital Gain */ 83 ad1843_LDA2GM = { 10, 15, 1 }, /* Left DAC2 Analog Mute */ 84 ad1843_RDA1AM = { 11, 7, 1 }, /* Right DAC1 Digital Mute */ 85 ad1843_LDA1AM = { 11, 15, 1 }, /* Left DAC1 Digital Mute */ 86 ad1843_RDA2AM = { 12, 7, 1 }, /* Right DAC2 Digital Mute */ 87 ad1843_LDA2AM = { 12, 15, 1 }, /* Left DAC2 Digital Mute */ 88 ad1843_ADLC = { 15, 0, 2 }, /* ADC Left Sample Rate Source */ 89 ad1843_ADRC = { 15, 2, 2 }, /* ADC Right Sample Rate Source */ 90 ad1843_DA1C = { 15, 8, 2 }, /* DAC1 Sample Rate Source */ 91 ad1843_DA2C = { 15, 10, 2 }, /* DAC2 Sample Rate Source */ 92 ad1843_C1C = { 17, 0, 16 }, /* Clock 1 Sample Rate Select */ 93 ad1843_C2C = { 20, 0, 16 }, /* Clock 2 Sample Rate Select */ 94 ad1843_C3C = { 23, 0, 16 }, /* Clock 3 Sample Rate Select */ 95 ad1843_DAADL = { 25, 4, 2 }, /* Digital ADC Left Source Select */ 96 ad1843_DAADR = { 25, 6, 2 }, /* Digital ADC Right Source Select */ 97 ad1843_DAMIX = { 25, 14, 1 }, /* DAC Digital Mix Enable */ 98 ad1843_DRSFLT = { 25, 15, 1 }, /* Digital Reampler Filter Mode */ 99 ad1843_ADLF = { 26, 0, 2 }, /* ADC Left Channel Data Format */ 100 ad1843_ADRF = { 26, 2, 2 }, /* ADC Right Channel Data Format */ 101 ad1843_ADTLK = { 26, 4, 1 }, /* ADC Transmit Lock Mode Select */ 102 ad1843_SCF = { 26, 7, 1 }, /* SCLK Frequency Select */ 103 ad1843_DA1F = { 26, 8, 2 }, /* DAC1 Data Format Select */ 104 ad1843_DA2F = { 26, 10, 2 }, /* DAC2 Data Format Select */ 105 ad1843_DA1SM = { 26, 14, 1 }, /* DAC1 Stereo/Mono Mode Select */ 106 ad1843_DA2SM = { 26, 15, 1 }, /* DAC2 Stereo/Mono Mode Select */ 107 ad1843_ADLEN = { 27, 0, 1 }, /* ADC Left Channel Enable */ 108 ad1843_ADREN = { 27, 1, 1 }, /* ADC Right Channel Enable */ 109 ad1843_AAMEN = { 27, 4, 1 }, /* Analog to Analog Mix Enable */ 110 ad1843_ANAEN = { 27, 7, 1 }, /* Analog Channel Enable */ 111 ad1843_DA1EN = { 27, 8, 1 }, /* DAC1 Enable */ 112 ad1843_DA2EN = { 27, 9, 1 }, /* DAC2 Enable */ 113 ad1843_DDMEN = { 27, 12, 1 }, /* DAC2 to DAC1 Mix Enable */ 114 ad1843_C1EN = { 28, 11, 1 }, /* Clock Generator 1 Enable */ 115 ad1843_C2EN = { 28, 12, 1 }, /* Clock Generator 2 Enable */ 116 ad1843_C3EN = { 28, 13, 1 }, /* Clock Generator 3 Enable */ 117 ad1843_PDNI = { 28, 15, 1 }; /* Converter Power Down */ 118 119 /* 120 * The various registers of the AD1843 use three different formats for 121 * specifying gain. The ad1843_gain structure parameterizes the 122 * formats. 123 */ 124 125 struct ad1843_gain { 126 int negative; /* nonzero if gain is negative. */ 127 const struct ad1843_bitfield *lfield; 128 const struct ad1843_bitfield *rfield; 129 const struct ad1843_bitfield *lmute; 130 const struct ad1843_bitfield *rmute; 131 }; 132 133 static const struct ad1843_gain ad1843_gain_RECLEV = { 134 .negative = 0, 135 .lfield = &ad1843_LIG, 136 .rfield = &ad1843_RIG 137 }; 138 static const struct ad1843_gain ad1843_gain_LINE = { 139 .negative = 1, 140 .lfield = &ad1843_LX1M, 141 .rfield = &ad1843_RX1M, 142 .lmute = &ad1843_LX1MM, 143 .rmute = &ad1843_RX1MM 144 }; 145 static const struct ad1843_gain ad1843_gain_LINE_2 = { 146 .negative = 1, 147 .lfield = &ad1843_LDA2G, 148 .rfield = &ad1843_RDA2G, 149 .lmute = &ad1843_LDA2GM, 150 .rmute = &ad1843_RDA2GM 151 }; 152 static const struct ad1843_gain ad1843_gain_MIC = { 153 .negative = 1, 154 .lfield = &ad1843_LMCM, 155 .rfield = &ad1843_RMCM, 156 .lmute = &ad1843_LMCMM, 157 .rmute = &ad1843_RMCMM 158 }; 159 static const struct ad1843_gain ad1843_gain_PCM_0 = { 160 .negative = 1, 161 .lfield = &ad1843_LDA1G, 162 .rfield = &ad1843_RDA1G, 163 .lmute = &ad1843_LDA1GM, 164 .rmute = &ad1843_RDA1GM 165 }; 166 static const struct ad1843_gain ad1843_gain_PCM_1 = { 167 .negative = 1, 168 .lfield = &ad1843_LD2M, 169 .rfield = &ad1843_RD2M, 170 .lmute = &ad1843_LD2MM, 171 .rmute = &ad1843_RD2MM 172 }; 173 174 static const struct ad1843_gain *ad1843_gain[AD1843_GAIN_SIZE] = 175 { 176 &ad1843_gain_RECLEV, 177 &ad1843_gain_LINE, 178 &ad1843_gain_LINE_2, 179 &ad1843_gain_MIC, 180 &ad1843_gain_PCM_0, 181 &ad1843_gain_PCM_1, 182 }; 183 184 /* read the current value of an AD1843 bitfield. */ 185 186 static int ad1843_read_bits(struct snd_ad1843 *ad1843, 187 const struct ad1843_bitfield *field) 188 { 189 int w; 190 191 w = ad1843->read(ad1843->chip, field->reg); 192 return w >> field->lo_bit & ((1 << field->nbits) - 1); 193 } 194 195 /* 196 * write a new value to an AD1843 bitfield and return the old value. 197 */ 198 199 static int ad1843_write_bits(struct snd_ad1843 *ad1843, 200 const struct ad1843_bitfield *field, 201 int newval) 202 { 203 int w, mask, oldval, newbits; 204 205 w = ad1843->read(ad1843->chip, field->reg); 206 mask = ((1 << field->nbits) - 1) << field->lo_bit; 207 oldval = (w & mask) >> field->lo_bit; 208 newbits = (newval << field->lo_bit) & mask; 209 w = (w & ~mask) | newbits; 210 ad1843->write(ad1843->chip, field->reg, w); 211 212 return oldval; 213 } 214 215 /* 216 * ad1843_read_multi reads multiple bitfields from the same AD1843 217 * register. It uses a single read cycle to do it. (Reading the 218 * ad1843 requires 256 bit times at 12.288 MHz, or nearly 20 219 * microseconds.) 220 * 221 * Called like this. 222 * 223 * ad1843_read_multi(ad1843, nfields, 224 * &ad1843_FIELD1, &val1, 225 * &ad1843_FIELD2, &val2, ...); 226 */ 227 228 static void ad1843_read_multi(struct snd_ad1843 *ad1843, int argcount, ...) 229 { 230 va_list ap; 231 const struct ad1843_bitfield *fp; 232 int w = 0, mask, *value, reg = -1; 233 234 va_start(ap, argcount); 235 while (--argcount >= 0) { 236 fp = va_arg(ap, const struct ad1843_bitfield *); 237 value = va_arg(ap, int *); 238 if (reg == -1) { 239 reg = fp->reg; 240 w = ad1843->read(ad1843->chip, reg); 241 } 242 243 mask = (1 << fp->nbits) - 1; 244 *value = w >> fp->lo_bit & mask; 245 } 246 va_end(ap); 247 } 248 249 /* 250 * ad1843_write_multi stores multiple bitfields into the same AD1843 251 * register. It uses one read and one write cycle to do it. 252 * 253 * Called like this. 254 * 255 * ad1843_write_multi(ad1843, nfields, 256 * &ad1843_FIELD1, val1, 257 * &ad1843_FIELF2, val2, ...); 258 */ 259 260 static void ad1843_write_multi(struct snd_ad1843 *ad1843, int argcount, ...) 261 { 262 va_list ap; 263 int reg; 264 const struct ad1843_bitfield *fp; 265 int value; 266 int w, m, mask, bits; 267 268 mask = 0; 269 bits = 0; 270 reg = -1; 271 272 va_start(ap, argcount); 273 while (--argcount >= 0) { 274 fp = va_arg(ap, const struct ad1843_bitfield *); 275 value = va_arg(ap, int); 276 if (reg == -1) 277 reg = fp->reg; 278 else 279 BUG_ON(reg != fp->reg); 280 m = ((1 << fp->nbits) - 1) << fp->lo_bit; 281 mask |= m; 282 bits |= (value << fp->lo_bit) & m; 283 } 284 va_end(ap); 285 286 if (~mask & 0xFFFF) 287 w = ad1843->read(ad1843->chip, reg); 288 else 289 w = 0; 290 w = (w & ~mask) | bits; 291 ad1843->write(ad1843->chip, reg, w); 292 } 293 294 int ad1843_get_gain_max(struct snd_ad1843 *ad1843, int id) 295 { 296 const struct ad1843_gain *gp = ad1843_gain[id]; 297 int ret; 298 299 ret = (1 << gp->lfield->nbits); 300 if (!gp->lmute) 301 ret -= 1; 302 return ret; 303 } 304 305 /* 306 * ad1843_get_gain reads the specified register and extracts the gain value 307 * using the supplied gain type. 308 */ 309 310 int ad1843_get_gain(struct snd_ad1843 *ad1843, int id) 311 { 312 int lg, rg, lm, rm; 313 const struct ad1843_gain *gp = ad1843_gain[id]; 314 unsigned short mask = (1 << gp->lfield->nbits) - 1; 315 316 ad1843_read_multi(ad1843, 2, gp->lfield, &lg, gp->rfield, &rg); 317 if (gp->negative) { 318 lg = mask - lg; 319 rg = mask - rg; 320 } 321 if (gp->lmute) { 322 ad1843_read_multi(ad1843, 2, gp->lmute, &lm, gp->rmute, &rm); 323 if (lm) 324 lg = 0; 325 if (rm) 326 rg = 0; 327 } 328 return lg << 0 | rg << 8; 329 } 330 331 /* 332 * Set an audio channel's gain. 333 * 334 * Returns the new gain, which may be lower than the old gain. 335 */ 336 337 int ad1843_set_gain(struct snd_ad1843 *ad1843, int id, int newval) 338 { 339 const struct ad1843_gain *gp = ad1843_gain[id]; 340 unsigned short mask = (1 << gp->lfield->nbits) - 1; 341 342 int lg = (newval >> 0) & mask; 343 int rg = (newval >> 8) & mask; 344 int lm = (lg == 0) ? 1 : 0; 345 int rm = (rg == 0) ? 1 : 0; 346 347 if (gp->negative) { 348 lg = mask - lg; 349 rg = mask - rg; 350 } 351 if (gp->lmute) 352 ad1843_write_multi(ad1843, 2, gp->lmute, lm, gp->rmute, rm); 353 ad1843_write_multi(ad1843, 2, gp->lfield, lg, gp->rfield, rg); 354 return ad1843_get_gain(ad1843, id); 355 } 356 357 /* Returns the current recording source */ 358 359 int ad1843_get_recsrc(struct snd_ad1843 *ad1843) 360 { 361 int val = ad1843_read_bits(ad1843, &ad1843_LSS); 362 363 if (val < 0 || val > 2) { 364 val = 2; 365 ad1843_write_multi(ad1843, 2, 366 &ad1843_LSS, val, &ad1843_RSS, val); 367 } 368 return val; 369 } 370 371 /* 372 * Set recording source. 373 * 374 * Returns newsrc on success, -errno on failure. 375 */ 376 377 int ad1843_set_recsrc(struct snd_ad1843 *ad1843, int newsrc) 378 { 379 if (newsrc < 0 || newsrc > 2) 380 return -EINVAL; 381 382 ad1843_write_multi(ad1843, 2, &ad1843_LSS, newsrc, &ad1843_RSS, newsrc); 383 return newsrc; 384 } 385 386 /* Setup ad1843 for D/A conversion. */ 387 388 void ad1843_setup_dac(struct snd_ad1843 *ad1843, 389 unsigned int id, 390 unsigned int framerate, 391 snd_pcm_format_t fmt, 392 unsigned int channels) 393 { 394 int ad_fmt = 0, ad_mode = 0; 395 396 switch (fmt) { 397 case SNDRV_PCM_FORMAT_S8: 398 ad_fmt = 0; 399 break; 400 case SNDRV_PCM_FORMAT_U8: 401 ad_fmt = 0; 402 break; 403 case SNDRV_PCM_FORMAT_S16_LE: 404 ad_fmt = 1; 405 break; 406 case SNDRV_PCM_FORMAT_MU_LAW: 407 ad_fmt = 2; 408 break; 409 case SNDRV_PCM_FORMAT_A_LAW: 410 ad_fmt = 3; 411 break; 412 default: 413 break; 414 } 415 416 switch (channels) { 417 case 2: 418 ad_mode = 0; 419 break; 420 case 1: 421 ad_mode = 1; 422 break; 423 default: 424 break; 425 } 426 427 if (id) { 428 ad1843_write_bits(ad1843, &ad1843_C2C, framerate); 429 ad1843_write_multi(ad1843, 2, 430 &ad1843_DA2SM, ad_mode, 431 &ad1843_DA2F, ad_fmt); 432 } else { 433 ad1843_write_bits(ad1843, &ad1843_C1C, framerate); 434 ad1843_write_multi(ad1843, 2, 435 &ad1843_DA1SM, ad_mode, 436 &ad1843_DA1F, ad_fmt); 437 } 438 } 439 440 void ad1843_shutdown_dac(struct snd_ad1843 *ad1843, unsigned int id) 441 { 442 if (id) 443 ad1843_write_bits(ad1843, &ad1843_DA2F, 1); 444 else 445 ad1843_write_bits(ad1843, &ad1843_DA1F, 1); 446 } 447 448 void ad1843_setup_adc(struct snd_ad1843 *ad1843, 449 unsigned int framerate, 450 snd_pcm_format_t fmt, 451 unsigned int channels) 452 { 453 int da_fmt = 0; 454 455 switch (fmt) { 456 case SNDRV_PCM_FORMAT_S8: da_fmt = 0; break; 457 case SNDRV_PCM_FORMAT_U8: da_fmt = 0; break; 458 case SNDRV_PCM_FORMAT_S16_LE: da_fmt = 1; break; 459 case SNDRV_PCM_FORMAT_MU_LAW: da_fmt = 2; break; 460 case SNDRV_PCM_FORMAT_A_LAW: da_fmt = 3; break; 461 default: break; 462 } 463 464 ad1843_write_bits(ad1843, &ad1843_C3C, framerate); 465 ad1843_write_multi(ad1843, 2, 466 &ad1843_ADLF, da_fmt, &ad1843_ADRF, da_fmt); 467 } 468 469 void ad1843_shutdown_adc(struct snd_ad1843 *ad1843) 470 { 471 /* nothing to do */ 472 } 473 474 /* 475 * Fully initialize the ad1843. As described in the AD1843 data 476 * sheet, section "START-UP SEQUENCE". The numbered comments are 477 * subsection headings from the data sheet. See the data sheet, pages 478 * 52-54, for more info. 479 * 480 * return 0 on success, -errno on failure. */ 481 482 int ad1843_init(struct snd_ad1843 *ad1843) 483 { 484 unsigned long later; 485 486 if (ad1843_read_bits(ad1843, &ad1843_INIT) != 0) { 487 printk(KERN_ERR "ad1843: AD1843 won't initialize\n"); 488 return -EIO; 489 } 490 491 ad1843_write_bits(ad1843, &ad1843_SCF, 1); 492 493 /* 4. Put the conversion resources into standby. */ 494 ad1843_write_bits(ad1843, &ad1843_PDNI, 0); 495 later = jiffies + msecs_to_jiffies(500); 496 497 while (ad1843_read_bits(ad1843, &ad1843_PDNO)) { 498 if (time_after(jiffies, later)) { 499 printk(KERN_ERR 500 "ad1843: AD1843 won't power up\n"); 501 return -EIO; 502 } 503 schedule_timeout_interruptible(5); 504 } 505 506 /* 5. Power up the clock generators and enable clock output pins. */ 507 ad1843_write_multi(ad1843, 3, 508 &ad1843_C1EN, 1, 509 &ad1843_C2EN, 1, 510 &ad1843_C3EN, 1); 511 512 /* 6. Configure conversion resources while they are in standby. */ 513 514 /* DAC1/2 use clock 1/2 as source, ADC uses clock 3. Always. */ 515 ad1843_write_multi(ad1843, 4, 516 &ad1843_DA1C, 1, 517 &ad1843_DA2C, 2, 518 &ad1843_ADLC, 3, 519 &ad1843_ADRC, 3); 520 521 /* 7. Enable conversion resources. */ 522 ad1843_write_bits(ad1843, &ad1843_ADTLK, 1); 523 ad1843_write_multi(ad1843, 7, 524 &ad1843_ANAEN, 1, 525 &ad1843_AAMEN, 1, 526 &ad1843_DA1EN, 1, 527 &ad1843_DA2EN, 1, 528 &ad1843_DDMEN, 1, 529 &ad1843_ADLEN, 1, 530 &ad1843_ADREN, 1); 531 532 /* 8. Configure conversion resources while they are enabled. */ 533 534 /* set gain to 0 for all channels */ 535 ad1843_set_gain(ad1843, AD1843_GAIN_RECLEV, 0); 536 ad1843_set_gain(ad1843, AD1843_GAIN_LINE, 0); 537 ad1843_set_gain(ad1843, AD1843_GAIN_LINE_2, 0); 538 ad1843_set_gain(ad1843, AD1843_GAIN_MIC, 0); 539 ad1843_set_gain(ad1843, AD1843_GAIN_PCM_0, 0); 540 ad1843_set_gain(ad1843, AD1843_GAIN_PCM_1, 0); 541 542 /* Unmute all channels. */ 543 /* DAC1 */ 544 ad1843_write_multi(ad1843, 2, &ad1843_LDA1GM, 0, &ad1843_RDA1GM, 0); 545 /* DAC2 */ 546 ad1843_write_multi(ad1843, 2, &ad1843_LDA2GM, 0, &ad1843_RDA2GM, 0); 547 548 /* Set default recording source to Line In and set 549 * mic gain to +20 dB. 550 */ 551 ad1843_set_recsrc(ad1843, 2); 552 ad1843_write_multi(ad1843, 2, &ad1843_LMGE, 1, &ad1843_RMGE, 1); 553 554 /* Set Speaker Out level to +/- 4V and unmute it. */ 555 ad1843_write_multi(ad1843, 3, 556 &ad1843_HPOS, 1, 557 &ad1843_HPOM, 0, 558 &ad1843_MPOM, 0); 559 560 return 0; 561 } 562