1 /* 2 * Low-level ALSA driver for the ENSONIQ SoundScape 3 * Copyright (c) by Chris Rankin 4 * 5 * This driver was written in part using information obtained from 6 * the OSS/Free SoundScape driver, written by Hannu Savolainen. 7 * 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License as published by 11 * the Free Software Foundation; either version 2 of the License, or 12 * (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 22 */ 23 24 #include <linux/init.h> 25 #include <linux/err.h> 26 #include <linux/isa.h> 27 #include <linux/delay.h> 28 #include <linux/firmware.h> 29 #include <linux/pnp.h> 30 #include <linux/spinlock.h> 31 #include <linux/module.h> 32 #include <asm/dma.h> 33 #include <sound/core.h> 34 #include <sound/wss.h> 35 #include <sound/mpu401.h> 36 #include <sound/initval.h> 37 38 39 MODULE_AUTHOR("Chris Rankin"); 40 MODULE_DESCRIPTION("ENSONIQ SoundScape driver"); 41 MODULE_LICENSE("GPL"); 42 MODULE_FIRMWARE("sndscape.co0"); 43 MODULE_FIRMWARE("sndscape.co1"); 44 MODULE_FIRMWARE("sndscape.co2"); 45 MODULE_FIRMWARE("sndscape.co3"); 46 MODULE_FIRMWARE("sndscape.co4"); 47 MODULE_FIRMWARE("scope.cod"); 48 49 static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; 50 static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; 51 static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; 52 static long wss_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; 53 static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; 54 static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; 55 static int dma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; 56 static int dma2[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; 57 static bool joystick[SNDRV_CARDS]; 58 59 module_param_array(index, int, NULL, 0444); 60 MODULE_PARM_DESC(index, "Index number for SoundScape soundcard"); 61 62 module_param_array(id, charp, NULL, 0444); 63 MODULE_PARM_DESC(id, "Description for SoundScape card"); 64 65 module_param_array(port, long, NULL, 0444); 66 MODULE_PARM_DESC(port, "Port # for SoundScape driver."); 67 68 module_param_array(wss_port, long, NULL, 0444); 69 MODULE_PARM_DESC(wss_port, "WSS Port # for SoundScape driver."); 70 71 module_param_array(irq, int, NULL, 0444); 72 MODULE_PARM_DESC(irq, "IRQ # for SoundScape driver."); 73 74 module_param_array(mpu_irq, int, NULL, 0444); 75 MODULE_PARM_DESC(mpu_irq, "MPU401 IRQ # for SoundScape driver."); 76 77 module_param_array(dma, int, NULL, 0444); 78 MODULE_PARM_DESC(dma, "DMA # for SoundScape driver."); 79 80 module_param_array(dma2, int, NULL, 0444); 81 MODULE_PARM_DESC(dma2, "DMA2 # for SoundScape driver."); 82 83 module_param_array(joystick, bool, NULL, 0444); 84 MODULE_PARM_DESC(joystick, "Enable gameport."); 85 86 #ifdef CONFIG_PNP 87 static int isa_registered; 88 static int pnp_registered; 89 90 static struct pnp_card_device_id sscape_pnpids[] = { 91 { .id = "ENS3081", .devs = { { "ENS0000" } } }, /* Soundscape PnP */ 92 { .id = "ENS4081", .devs = { { "ENS1011" } } }, /* VIVO90 */ 93 { .id = "" } /* end */ 94 }; 95 96 MODULE_DEVICE_TABLE(pnp_card, sscape_pnpids); 97 #endif 98 99 100 #define HOST_CTRL_IO(i) ((i) + 2) 101 #define HOST_DATA_IO(i) ((i) + 3) 102 #define ODIE_ADDR_IO(i) ((i) + 4) 103 #define ODIE_DATA_IO(i) ((i) + 5) 104 #define CODEC_IO(i) ((i) + 8) 105 106 #define IC_ODIE 1 107 #define IC_OPUS 2 108 109 #define RX_READY 0x01 110 #define TX_READY 0x02 111 112 #define CMD_ACK 0x80 113 #define CMD_SET_MIDI_VOL 0x84 114 #define CMD_GET_MIDI_VOL 0x85 115 #define CMD_XXX_MIDI_VOL 0x86 116 #define CMD_SET_EXTMIDI 0x8a 117 #define CMD_GET_EXTMIDI 0x8b 118 #define CMD_SET_MT32 0x8c 119 #define CMD_GET_MT32 0x8d 120 121 enum GA_REG { 122 GA_INTSTAT_REG = 0, 123 GA_INTENA_REG, 124 GA_DMAA_REG, 125 GA_DMAB_REG, 126 GA_INTCFG_REG, 127 GA_DMACFG_REG, 128 GA_CDCFG_REG, 129 GA_SMCFGA_REG, 130 GA_SMCFGB_REG, 131 GA_HMCTL_REG 132 }; 133 134 #define DMA_8BIT 0x80 135 136 137 enum card_type { 138 MEDIA_FX, /* Sequoia S-1000 */ 139 SSCAPE, /* Sequoia S-2000 */ 140 SSCAPE_PNP, 141 SSCAPE_VIVO, 142 }; 143 144 struct soundscape { 145 spinlock_t lock; 146 unsigned io_base; 147 int ic_type; 148 enum card_type type; 149 struct resource *io_res; 150 struct resource *wss_res; 151 struct snd_wss *chip; 152 153 unsigned char midi_vol; 154 }; 155 156 #define INVALID_IRQ ((unsigned)-1) 157 158 159 static inline struct soundscape *get_card_soundscape(struct snd_card *c) 160 { 161 return (struct soundscape *) (c->private_data); 162 } 163 164 /* 165 * Allocates some kernel memory that we can use for DMA. 166 * I think this means that the memory has to map to 167 * contiguous pages of physical memory. 168 */ 169 static struct snd_dma_buffer *get_dmabuf(struct snd_dma_buffer *buf, 170 unsigned long size) 171 { 172 if (buf) { 173 if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV, 174 snd_dma_isa_data(), 175 size, buf) < 0) { 176 snd_printk(KERN_ERR "sscape: Failed to allocate " 177 "%lu bytes for DMA\n", 178 size); 179 return NULL; 180 } 181 } 182 183 return buf; 184 } 185 186 /* 187 * Release the DMA-able kernel memory ... 188 */ 189 static void free_dmabuf(struct snd_dma_buffer *buf) 190 { 191 if (buf && buf->area) 192 snd_dma_free_pages(buf); 193 } 194 195 /* 196 * This function writes to the SoundScape's control registers, 197 * but doesn't do any locking. It's up to the caller to do that. 198 * This is why this function is "unsafe" ... 199 */ 200 static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg, 201 unsigned char val) 202 { 203 outb(reg, ODIE_ADDR_IO(io_base)); 204 outb(val, ODIE_DATA_IO(io_base)); 205 } 206 207 /* 208 * Write to the SoundScape's control registers, and do the 209 * necessary locking ... 210 */ 211 static void sscape_write(struct soundscape *s, enum GA_REG reg, 212 unsigned char val) 213 { 214 unsigned long flags; 215 216 spin_lock_irqsave(&s->lock, flags); 217 sscape_write_unsafe(s->io_base, reg, val); 218 spin_unlock_irqrestore(&s->lock, flags); 219 } 220 221 /* 222 * Read from the SoundScape's control registers, but leave any 223 * locking to the caller. This is why the function is "unsafe" ... 224 */ 225 static inline unsigned char sscape_read_unsafe(unsigned io_base, 226 enum GA_REG reg) 227 { 228 outb(reg, ODIE_ADDR_IO(io_base)); 229 return inb(ODIE_DATA_IO(io_base)); 230 } 231 232 /* 233 * Puts the SoundScape into "host" mode, as compared to "MIDI" mode 234 */ 235 static inline void set_host_mode_unsafe(unsigned io_base) 236 { 237 outb(0x0, HOST_CTRL_IO(io_base)); 238 } 239 240 /* 241 * Puts the SoundScape into "MIDI" mode, as compared to "host" mode 242 */ 243 static inline void set_midi_mode_unsafe(unsigned io_base) 244 { 245 outb(0x3, HOST_CTRL_IO(io_base)); 246 } 247 248 /* 249 * Read the SoundScape's host-mode control register, but leave 250 * any locking issues to the caller ... 251 */ 252 static inline int host_read_unsafe(unsigned io_base) 253 { 254 int data = -1; 255 if ((inb(HOST_CTRL_IO(io_base)) & RX_READY) != 0) 256 data = inb(HOST_DATA_IO(io_base)); 257 258 return data; 259 } 260 261 /* 262 * Read the SoundScape's host-mode control register, performing 263 * a limited amount of busy-waiting if the register isn't ready. 264 * Also leaves all locking-issues to the caller ... 265 */ 266 static int host_read_ctrl_unsafe(unsigned io_base, unsigned timeout) 267 { 268 int data; 269 270 while (((data = host_read_unsafe(io_base)) < 0) && (timeout != 0)) { 271 udelay(100); 272 --timeout; 273 } /* while */ 274 275 return data; 276 } 277 278 /* 279 * Write to the SoundScape's host-mode control registers, but 280 * leave any locking issues to the caller ... 281 */ 282 static inline int host_write_unsafe(unsigned io_base, unsigned char data) 283 { 284 if ((inb(HOST_CTRL_IO(io_base)) & TX_READY) != 0) { 285 outb(data, HOST_DATA_IO(io_base)); 286 return 1; 287 } 288 289 return 0; 290 } 291 292 /* 293 * Write to the SoundScape's host-mode control registers, performing 294 * a limited amount of busy-waiting if the register isn't ready. 295 * Also leaves all locking-issues to the caller ... 296 */ 297 static int host_write_ctrl_unsafe(unsigned io_base, unsigned char data, 298 unsigned timeout) 299 { 300 int err; 301 302 while (!(err = host_write_unsafe(io_base, data)) && (timeout != 0)) { 303 udelay(100); 304 --timeout; 305 } /* while */ 306 307 return err; 308 } 309 310 311 /* 312 * Check that the MIDI subsystem is operational. If it isn't, 313 * then we will hang the computer if we try to use it ... 314 * 315 * NOTE: This check is based upon observation, not documentation. 316 */ 317 static inline int verify_mpu401(const struct snd_mpu401 *mpu) 318 { 319 return ((inb(MPU401C(mpu)) & 0xc0) == 0x80); 320 } 321 322 /* 323 * This is apparently the standard way to initailise an MPU-401 324 */ 325 static inline void initialise_mpu401(const struct snd_mpu401 *mpu) 326 { 327 outb(0, MPU401D(mpu)); 328 } 329 330 /* 331 * Tell the SoundScape to activate the AD1845 chip (I think). 332 * The AD1845 detection fails if we *don't* do this, so I 333 * think that this is a good idea ... 334 */ 335 static void activate_ad1845_unsafe(unsigned io_base) 336 { 337 unsigned char val = sscape_read_unsafe(io_base, GA_HMCTL_REG); 338 sscape_write_unsafe(io_base, GA_HMCTL_REG, (val & 0xcf) | 0x10); 339 sscape_write_unsafe(io_base, GA_CDCFG_REG, 0x80); 340 } 341 342 /* 343 * Do the necessary ALSA-level cleanup to deallocate our driver ... 344 */ 345 static void soundscape_free(struct snd_card *c) 346 { 347 struct soundscape *sscape = get_card_soundscape(c); 348 release_and_free_resource(sscape->io_res); 349 release_and_free_resource(sscape->wss_res); 350 free_dma(sscape->chip->dma1); 351 } 352 353 /* 354 * Tell the SoundScape to begin a DMA tranfer using the given channel. 355 * All locking issues are left to the caller. 356 */ 357 static void sscape_start_dma_unsafe(unsigned io_base, enum GA_REG reg) 358 { 359 sscape_write_unsafe(io_base, reg, 360 sscape_read_unsafe(io_base, reg) | 0x01); 361 sscape_write_unsafe(io_base, reg, 362 sscape_read_unsafe(io_base, reg) & 0xfe); 363 } 364 365 /* 366 * Wait for a DMA transfer to complete. This is a "limited busy-wait", 367 * and all locking issues are left to the caller. 368 */ 369 static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, 370 unsigned timeout) 371 { 372 while (!(sscape_read_unsafe(io_base, reg) & 0x01) && (timeout != 0)) { 373 udelay(100); 374 --timeout; 375 } /* while */ 376 377 return sscape_read_unsafe(io_base, reg) & 0x01; 378 } 379 380 /* 381 * Wait for the On-Board Processor to return its start-up 382 * acknowledgement sequence. This wait is too long for 383 * us to perform "busy-waiting", and so we must sleep. 384 * This in turn means that we must not be holding any 385 * spinlocks when we call this function. 386 */ 387 static int obp_startup_ack(struct soundscape *s, unsigned timeout) 388 { 389 unsigned long end_time = jiffies + msecs_to_jiffies(timeout); 390 391 do { 392 unsigned long flags; 393 int x; 394 395 spin_lock_irqsave(&s->lock, flags); 396 x = host_read_unsafe(s->io_base); 397 spin_unlock_irqrestore(&s->lock, flags); 398 if (x == 0xfe || x == 0xff) 399 return 1; 400 401 msleep(10); 402 } while (time_before(jiffies, end_time)); 403 404 return 0; 405 } 406 407 /* 408 * Wait for the host to return its start-up acknowledgement 409 * sequence. This wait is too long for us to perform 410 * "busy-waiting", and so we must sleep. This in turn means 411 * that we must not be holding any spinlocks when we call 412 * this function. 413 */ 414 static int host_startup_ack(struct soundscape *s, unsigned timeout) 415 { 416 unsigned long end_time = jiffies + msecs_to_jiffies(timeout); 417 418 do { 419 unsigned long flags; 420 int x; 421 422 spin_lock_irqsave(&s->lock, flags); 423 x = host_read_unsafe(s->io_base); 424 spin_unlock_irqrestore(&s->lock, flags); 425 if (x == 0xfe) 426 return 1; 427 428 msleep(10); 429 } while (time_before(jiffies, end_time)); 430 431 return 0; 432 } 433 434 /* 435 * Upload a byte-stream into the SoundScape using DMA channel A. 436 */ 437 static int upload_dma_data(struct soundscape *s, const unsigned char *data, 438 size_t size) 439 { 440 unsigned long flags; 441 struct snd_dma_buffer dma; 442 int ret; 443 unsigned char val; 444 445 if (!get_dmabuf(&dma, PAGE_ALIGN(32 * 1024))) 446 return -ENOMEM; 447 448 spin_lock_irqsave(&s->lock, flags); 449 450 /* 451 * Reset the board ... 452 */ 453 val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG); 454 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val & 0x3f); 455 456 /* 457 * Enable the DMA channels and configure them ... 458 */ 459 val = (s->chip->dma1 << 4) | DMA_8BIT; 460 sscape_write_unsafe(s->io_base, GA_DMAA_REG, val); 461 sscape_write_unsafe(s->io_base, GA_DMAB_REG, 0x20); 462 463 /* 464 * Take the board out of reset ... 465 */ 466 val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG); 467 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x80); 468 469 /* 470 * Upload the firmware to the SoundScape 471 * board through the DMA channel ... 472 */ 473 while (size != 0) { 474 unsigned long len; 475 476 len = min(size, dma.bytes); 477 memcpy(dma.area, data, len); 478 data += len; 479 size -= len; 480 481 snd_dma_program(s->chip->dma1, dma.addr, len, DMA_MODE_WRITE); 482 sscape_start_dma_unsafe(s->io_base, GA_DMAA_REG); 483 if (!sscape_wait_dma_unsafe(s->io_base, GA_DMAA_REG, 5000)) { 484 /* 485 * Don't forget to release this spinlock we're holding 486 */ 487 spin_unlock_irqrestore(&s->lock, flags); 488 489 snd_printk(KERN_ERR 490 "sscape: DMA upload has timed out\n"); 491 ret = -EAGAIN; 492 goto _release_dma; 493 } 494 } /* while */ 495 496 set_host_mode_unsafe(s->io_base); 497 outb(0x0, s->io_base); 498 499 /* 500 * Boot the board ... (I think) 501 */ 502 val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG); 503 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x40); 504 spin_unlock_irqrestore(&s->lock, flags); 505 506 /* 507 * If all has gone well, then the board should acknowledge 508 * the new upload and tell us that it has rebooted OK. We 509 * give it 5 seconds (max) ... 510 */ 511 ret = 0; 512 if (!obp_startup_ack(s, 5000)) { 513 snd_printk(KERN_ERR "sscape: No response " 514 "from on-board processor after upload\n"); 515 ret = -EAGAIN; 516 } else if (!host_startup_ack(s, 5000)) { 517 snd_printk(KERN_ERR 518 "sscape: SoundScape failed to initialise\n"); 519 ret = -EAGAIN; 520 } 521 522 _release_dma: 523 /* 524 * NOTE!!! We are NOT holding any spinlocks at this point !!! 525 */ 526 sscape_write(s, GA_DMAA_REG, (s->ic_type == IC_OPUS ? 0x40 : 0x70)); 527 free_dmabuf(&dma); 528 529 return ret; 530 } 531 532 /* 533 * Upload the bootblock(?) into the SoundScape. The only 534 * purpose of this block of code seems to be to tell 535 * us which version of the microcode we should be using. 536 */ 537 static int sscape_upload_bootblock(struct snd_card *card) 538 { 539 struct soundscape *sscape = get_card_soundscape(card); 540 unsigned long flags; 541 const struct firmware *init_fw = NULL; 542 int data = 0; 543 int ret; 544 545 ret = request_firmware(&init_fw, "scope.cod", card->dev); 546 if (ret < 0) { 547 snd_printk(KERN_ERR "sscape: Error loading scope.cod"); 548 return ret; 549 } 550 ret = upload_dma_data(sscape, init_fw->data, init_fw->size); 551 552 release_firmware(init_fw); 553 554 spin_lock_irqsave(&sscape->lock, flags); 555 if (ret == 0) 556 data = host_read_ctrl_unsafe(sscape->io_base, 100); 557 558 if (data & 0x10) 559 sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2f); 560 561 spin_unlock_irqrestore(&sscape->lock, flags); 562 563 data &= 0xf; 564 if (ret == 0 && data > 7) { 565 snd_printk(KERN_ERR 566 "sscape: timeout reading firmware version\n"); 567 ret = -EAGAIN; 568 } 569 570 return (ret == 0) ? data : ret; 571 } 572 573 /* 574 * Upload the microcode into the SoundScape. 575 */ 576 static int sscape_upload_microcode(struct snd_card *card, int version) 577 { 578 struct soundscape *sscape = get_card_soundscape(card); 579 const struct firmware *init_fw = NULL; 580 char name[14]; 581 int err; 582 583 snprintf(name, sizeof(name), "sndscape.co%d", version); 584 585 err = request_firmware(&init_fw, name, card->dev); 586 if (err < 0) { 587 snd_printk(KERN_ERR "sscape: Error loading sndscape.co%d", 588 version); 589 return err; 590 } 591 err = upload_dma_data(sscape, init_fw->data, init_fw->size); 592 if (err == 0) 593 snd_printk(KERN_INFO "sscape: MIDI firmware loaded %d KBs\n", 594 init_fw->size >> 10); 595 596 release_firmware(init_fw); 597 598 return err; 599 } 600 601 /* 602 * Mixer control for the SoundScape's MIDI device. 603 */ 604 static int sscape_midi_info(struct snd_kcontrol *ctl, 605 struct snd_ctl_elem_info *uinfo) 606 { 607 uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; 608 uinfo->count = 1; 609 uinfo->value.integer.min = 0; 610 uinfo->value.integer.max = 127; 611 return 0; 612 } 613 614 static int sscape_midi_get(struct snd_kcontrol *kctl, 615 struct snd_ctl_elem_value *uctl) 616 { 617 struct snd_wss *chip = snd_kcontrol_chip(kctl); 618 struct snd_card *card = chip->card; 619 register struct soundscape *s = get_card_soundscape(card); 620 unsigned long flags; 621 622 spin_lock_irqsave(&s->lock, flags); 623 uctl->value.integer.value[0] = s->midi_vol; 624 spin_unlock_irqrestore(&s->lock, flags); 625 return 0; 626 } 627 628 static int sscape_midi_put(struct snd_kcontrol *kctl, 629 struct snd_ctl_elem_value *uctl) 630 { 631 struct snd_wss *chip = snd_kcontrol_chip(kctl); 632 struct snd_card *card = chip->card; 633 struct soundscape *s = get_card_soundscape(card); 634 unsigned long flags; 635 int change; 636 unsigned char new_val; 637 638 spin_lock_irqsave(&s->lock, flags); 639 640 new_val = uctl->value.integer.value[0] & 127; 641 /* 642 * We need to put the board into HOST mode before we 643 * can send any volume-changing HOST commands ... 644 */ 645 set_host_mode_unsafe(s->io_base); 646 647 /* 648 * To successfully change the MIDI volume setting, you seem to 649 * have to write a volume command, write the new volume value, 650 * and then perform another volume-related command. Perhaps the 651 * first command is an "open" and the second command is a "close"? 652 */ 653 if (s->midi_vol == new_val) { 654 change = 0; 655 goto __skip_change; 656 } 657 change = host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100) 658 && host_write_ctrl_unsafe(s->io_base, new_val, 100) 659 && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100) 660 && host_write_ctrl_unsafe(s->io_base, new_val, 100); 661 s->midi_vol = new_val; 662 __skip_change: 663 664 /* 665 * Take the board out of HOST mode and back into MIDI mode ... 666 */ 667 set_midi_mode_unsafe(s->io_base); 668 669 spin_unlock_irqrestore(&s->lock, flags); 670 return change; 671 } 672 673 static struct snd_kcontrol_new midi_mixer_ctl = { 674 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 675 .name = "MIDI", 676 .info = sscape_midi_info, 677 .get = sscape_midi_get, 678 .put = sscape_midi_put 679 }; 680 681 /* 682 * The SoundScape can use two IRQs from a possible set of four. 683 * These IRQs are encoded as bit patterns so that they can be 684 * written to the control registers. 685 */ 686 static unsigned get_irq_config(int sscape_type, int irq) 687 { 688 static const int valid_irq[] = { 9, 5, 7, 10 }; 689 static const int old_irq[] = { 9, 7, 5, 15 }; 690 unsigned cfg; 691 692 if (sscape_type == MEDIA_FX) { 693 for (cfg = 0; cfg < ARRAY_SIZE(old_irq); ++cfg) 694 if (irq == old_irq[cfg]) 695 return cfg; 696 } else { 697 for (cfg = 0; cfg < ARRAY_SIZE(valid_irq); ++cfg) 698 if (irq == valid_irq[cfg]) 699 return cfg; 700 } 701 702 return INVALID_IRQ; 703 } 704 705 /* 706 * Perform certain arcane port-checks to see whether there 707 * is a SoundScape board lurking behind the given ports. 708 */ 709 static int detect_sscape(struct soundscape *s, long wss_io) 710 { 711 unsigned long flags; 712 unsigned d; 713 int retval = 0; 714 715 spin_lock_irqsave(&s->lock, flags); 716 717 /* 718 * The following code is lifted from the original OSS driver, 719 * and as I don't have a datasheet I cannot really comment 720 * on what it is doing... 721 */ 722 if ((inb(HOST_CTRL_IO(s->io_base)) & 0x78) != 0) 723 goto _done; 724 725 d = inb(ODIE_ADDR_IO(s->io_base)) & 0xf0; 726 if ((d & 0x80) != 0) 727 goto _done; 728 729 if (d == 0) 730 s->ic_type = IC_ODIE; 731 else if ((d & 0x60) != 0) 732 s->ic_type = IC_OPUS; 733 else 734 goto _done; 735 736 outb(0xfa, ODIE_ADDR_IO(s->io_base)); 737 if ((inb(ODIE_ADDR_IO(s->io_base)) & 0x9f) != 0x0a) 738 goto _done; 739 740 outb(0xfe, ODIE_ADDR_IO(s->io_base)); 741 if ((inb(ODIE_ADDR_IO(s->io_base)) & 0x9f) != 0x0e) 742 goto _done; 743 744 outb(0xfe, ODIE_ADDR_IO(s->io_base)); 745 d = inb(ODIE_DATA_IO(s->io_base)); 746 if (s->type != SSCAPE_VIVO && (d & 0x9f) != 0x0e) 747 goto _done; 748 749 if (s->ic_type == IC_OPUS) 750 activate_ad1845_unsafe(s->io_base); 751 752 if (s->type == SSCAPE_VIVO) 753 wss_io += 4; 754 755 d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG); 756 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0); 757 758 /* wait for WSS codec */ 759 for (d = 0; d < 500; d++) { 760 if ((inb(wss_io) & 0x80) == 0) 761 break; 762 spin_unlock_irqrestore(&s->lock, flags); 763 msleep(1); 764 spin_lock_irqsave(&s->lock, flags); 765 } 766 767 if ((inb(wss_io) & 0x80) != 0) 768 goto _done; 769 770 if (inb(wss_io + 2) == 0xff) 771 goto _done; 772 773 d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f; 774 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d); 775 776 if ((inb(wss_io) & 0x80) != 0) 777 s->type = MEDIA_FX; 778 779 d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG); 780 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0); 781 /* wait for WSS codec */ 782 for (d = 0; d < 500; d++) { 783 if ((inb(wss_io) & 0x80) == 0) 784 break; 785 spin_unlock_irqrestore(&s->lock, flags); 786 msleep(1); 787 spin_lock_irqsave(&s->lock, flags); 788 } 789 790 /* 791 * SoundScape successfully detected! 792 */ 793 retval = 1; 794 795 _done: 796 spin_unlock_irqrestore(&s->lock, flags); 797 return retval; 798 } 799 800 /* 801 * ALSA callback function, called when attempting to open the MIDI device. 802 * Check that the MIDI firmware has been loaded, because we don't want 803 * to crash the machine. Also check that someone isn't using the hardware 804 * IOCTL device. 805 */ 806 static int mpu401_open(struct snd_mpu401 *mpu) 807 { 808 if (!verify_mpu401(mpu)) { 809 snd_printk(KERN_ERR "sscape: MIDI disabled, " 810 "please load firmware\n"); 811 return -ENODEV; 812 } 813 814 return 0; 815 } 816 817 /* 818 * Initialse an MPU-401 subdevice for MIDI support on the SoundScape. 819 */ 820 static int create_mpu401(struct snd_card *card, int devnum, 821 unsigned long port, int irq) 822 { 823 struct soundscape *sscape = get_card_soundscape(card); 824 struct snd_rawmidi *rawmidi; 825 int err; 826 827 err = snd_mpu401_uart_new(card, devnum, MPU401_HW_MPU401, port, 828 MPU401_INFO_INTEGRATED, irq, &rawmidi); 829 if (err == 0) { 830 struct snd_mpu401 *mpu = rawmidi->private_data; 831 mpu->open_input = mpu401_open; 832 mpu->open_output = mpu401_open; 833 mpu->private_data = sscape; 834 835 initialise_mpu401(mpu); 836 } 837 838 return err; 839 } 840 841 842 /* 843 * Create an AD1845 PCM subdevice on the SoundScape. The AD1845 844 * is very much like a CS4231, with a few extra bits. We will 845 * try to support at least some of the extra bits by overriding 846 * some of the CS4231 callback. 847 */ 848 static int create_ad1845(struct snd_card *card, unsigned port, 849 int irq, int dma1, int dma2) 850 { 851 register struct soundscape *sscape = get_card_soundscape(card); 852 struct snd_wss *chip; 853 int err; 854 int codec_type = WSS_HW_DETECT; 855 856 switch (sscape->type) { 857 case MEDIA_FX: 858 case SSCAPE: 859 /* 860 * There are some freak examples of early Soundscape cards 861 * with CS4231 instead of AD1848/CS4248. Unfortunately, the 862 * CS4231 works only in CS4248 compatibility mode on 863 * these cards so force it. 864 */ 865 if (sscape->ic_type != IC_OPUS) 866 codec_type = WSS_HW_AD1848; 867 break; 868 869 case SSCAPE_VIVO: 870 port += 4; 871 break; 872 default: 873 break; 874 } 875 876 err = snd_wss_create(card, port, -1, irq, dma1, dma2, 877 codec_type, WSS_HWSHARE_DMA1, &chip); 878 if (!err) { 879 unsigned long flags; 880 struct snd_pcm *pcm; 881 882 if (sscape->type != SSCAPE_VIVO) { 883 /* 884 * The input clock frequency on the SoundScape must 885 * be 14.31818 MHz, because we must set this register 886 * to get the playback to sound correct ... 887 */ 888 snd_wss_mce_up(chip); 889 spin_lock_irqsave(&chip->reg_lock, flags); 890 snd_wss_out(chip, AD1845_CLOCK, 0x20); 891 spin_unlock_irqrestore(&chip->reg_lock, flags); 892 snd_wss_mce_down(chip); 893 894 } 895 896 err = snd_wss_pcm(chip, 0, &pcm); 897 if (err < 0) { 898 snd_printk(KERN_ERR "sscape: No PCM device " 899 "for AD1845 chip\n"); 900 goto _error; 901 } 902 903 err = snd_wss_mixer(chip); 904 if (err < 0) { 905 snd_printk(KERN_ERR "sscape: No mixer device " 906 "for AD1845 chip\n"); 907 goto _error; 908 } 909 if (chip->hardware != WSS_HW_AD1848) { 910 err = snd_wss_timer(chip, 0, NULL); 911 if (err < 0) { 912 snd_printk(KERN_ERR "sscape: No timer device " 913 "for AD1845 chip\n"); 914 goto _error; 915 } 916 } 917 918 if (sscape->type != SSCAPE_VIVO) { 919 err = snd_ctl_add(card, 920 snd_ctl_new1(&midi_mixer_ctl, chip)); 921 if (err < 0) { 922 snd_printk(KERN_ERR "sscape: Could not create " 923 "MIDI mixer control\n"); 924 goto _error; 925 } 926 } 927 928 sscape->chip = chip; 929 } 930 931 _error: 932 return err; 933 } 934 935 936 /* 937 * Create an ALSA soundcard entry for the SoundScape, using 938 * the given list of port, IRQ and DMA resources. 939 */ 940 static int create_sscape(int dev, struct snd_card *card) 941 { 942 struct soundscape *sscape = get_card_soundscape(card); 943 unsigned dma_cfg; 944 unsigned irq_cfg; 945 unsigned mpu_irq_cfg; 946 struct resource *io_res; 947 struct resource *wss_res; 948 unsigned long flags; 949 int err; 950 int val; 951 const char *name; 952 953 /* 954 * Grab IO ports that we will need to probe so that we 955 * can detect and control this hardware ... 956 */ 957 io_res = request_region(port[dev], 8, "SoundScape"); 958 if (!io_res) { 959 snd_printk(KERN_ERR 960 "sscape: can't grab port 0x%lx\n", port[dev]); 961 return -EBUSY; 962 } 963 wss_res = NULL; 964 if (sscape->type == SSCAPE_VIVO) { 965 wss_res = request_region(wss_port[dev], 4, "SoundScape"); 966 if (!wss_res) { 967 snd_printk(KERN_ERR "sscape: can't grab port 0x%lx\n", 968 wss_port[dev]); 969 err = -EBUSY; 970 goto _release_region; 971 } 972 } 973 974 /* 975 * Grab one DMA channel ... 976 */ 977 err = request_dma(dma[dev], "SoundScape"); 978 if (err < 0) { 979 snd_printk(KERN_ERR "sscape: can't grab DMA %d\n", dma[dev]); 980 goto _release_region; 981 } 982 983 spin_lock_init(&sscape->lock); 984 sscape->io_res = io_res; 985 sscape->wss_res = wss_res; 986 sscape->io_base = port[dev]; 987 988 if (!detect_sscape(sscape, wss_port[dev])) { 989 printk(KERN_ERR "sscape: hardware not detected at 0x%x\n", 990 sscape->io_base); 991 err = -ENODEV; 992 goto _release_dma; 993 } 994 995 switch (sscape->type) { 996 case MEDIA_FX: 997 name = "MediaFX/SoundFX"; 998 break; 999 case SSCAPE: 1000 name = "Soundscape"; 1001 break; 1002 case SSCAPE_PNP: 1003 name = "Soundscape PnP"; 1004 break; 1005 case SSCAPE_VIVO: 1006 name = "Soundscape VIVO"; 1007 break; 1008 default: 1009 name = "unknown Soundscape"; 1010 break; 1011 } 1012 1013 printk(KERN_INFO "sscape: %s card detected at 0x%x, using IRQ %d, DMA %d\n", 1014 name, sscape->io_base, irq[dev], dma[dev]); 1015 1016 /* 1017 * Check that the user didn't pass us garbage data ... 1018 */ 1019 irq_cfg = get_irq_config(sscape->type, irq[dev]); 1020 if (irq_cfg == INVALID_IRQ) { 1021 snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", irq[dev]); 1022 err = -ENXIO; 1023 goto _release_dma; 1024 } 1025 1026 mpu_irq_cfg = get_irq_config(sscape->type, mpu_irq[dev]); 1027 if (mpu_irq_cfg == INVALID_IRQ) { 1028 snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]); 1029 err = -ENXIO; 1030 goto _release_dma; 1031 } 1032 1033 /* 1034 * Tell the on-board devices where their resources are (I think - 1035 * I can't be sure without a datasheet ... So many magic values!) 1036 */ 1037 spin_lock_irqsave(&sscape->lock, flags); 1038 1039 sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2e); 1040 sscape_write_unsafe(sscape->io_base, GA_SMCFGB_REG, 0x00); 1041 1042 /* 1043 * Enable and configure the DMA channels ... 1044 */ 1045 sscape_write_unsafe(sscape->io_base, GA_DMACFG_REG, 0x50); 1046 dma_cfg = (sscape->ic_type == IC_OPUS ? 0x40 : 0x70); 1047 sscape_write_unsafe(sscape->io_base, GA_DMAA_REG, dma_cfg); 1048 sscape_write_unsafe(sscape->io_base, GA_DMAB_REG, 0x20); 1049 1050 mpu_irq_cfg |= mpu_irq_cfg << 2; 1051 val = sscape_read_unsafe(sscape->io_base, GA_HMCTL_REG) & 0xF7; 1052 if (joystick[dev]) 1053 val |= 8; 1054 sscape_write_unsafe(sscape->io_base, GA_HMCTL_REG, val | 0x10); 1055 sscape_write_unsafe(sscape->io_base, GA_INTCFG_REG, 0xf0 | mpu_irq_cfg); 1056 sscape_write_unsafe(sscape->io_base, 1057 GA_CDCFG_REG, 0x09 | DMA_8BIT 1058 | (dma[dev] << 4) | (irq_cfg << 1)); 1059 /* 1060 * Enable the master IRQ ... 1061 */ 1062 sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x80); 1063 1064 spin_unlock_irqrestore(&sscape->lock, flags); 1065 1066 /* 1067 * We have now enabled the codec chip, and so we should 1068 * detect the AD1845 device ... 1069 */ 1070 err = create_ad1845(card, wss_port[dev], irq[dev], 1071 dma[dev], dma2[dev]); 1072 if (err < 0) { 1073 snd_printk(KERN_ERR 1074 "sscape: No AD1845 device at 0x%lx, IRQ %d\n", 1075 wss_port[dev], irq[dev]); 1076 goto _release_dma; 1077 } 1078 strcpy(card->driver, "SoundScape"); 1079 strcpy(card->shortname, name); 1080 snprintf(card->longname, sizeof(card->longname), 1081 "%s at 0x%lx, IRQ %d, DMA1 %d, DMA2 %d\n", 1082 name, sscape->chip->port, sscape->chip->irq, 1083 sscape->chip->dma1, sscape->chip->dma2); 1084 1085 #define MIDI_DEVNUM 0 1086 if (sscape->type != SSCAPE_VIVO) { 1087 err = sscape_upload_bootblock(card); 1088 if (err >= 0) 1089 err = sscape_upload_microcode(card, err); 1090 1091 if (err == 0) { 1092 err = create_mpu401(card, MIDI_DEVNUM, port[dev], 1093 mpu_irq[dev]); 1094 if (err < 0) { 1095 snd_printk(KERN_ERR "sscape: Failed to create " 1096 "MPU-401 device at 0x%lx\n", 1097 port[dev]); 1098 goto _release_dma; 1099 } 1100 1101 /* 1102 * Initialize mixer 1103 */ 1104 spin_lock_irqsave(&sscape->lock, flags); 1105 sscape->midi_vol = 0; 1106 host_write_ctrl_unsafe(sscape->io_base, 1107 CMD_SET_MIDI_VOL, 100); 1108 host_write_ctrl_unsafe(sscape->io_base, 1109 sscape->midi_vol, 100); 1110 host_write_ctrl_unsafe(sscape->io_base, 1111 CMD_XXX_MIDI_VOL, 100); 1112 host_write_ctrl_unsafe(sscape->io_base, 1113 sscape->midi_vol, 100); 1114 host_write_ctrl_unsafe(sscape->io_base, 1115 CMD_SET_EXTMIDI, 100); 1116 host_write_ctrl_unsafe(sscape->io_base, 1117 0, 100); 1118 host_write_ctrl_unsafe(sscape->io_base, CMD_ACK, 100); 1119 1120 set_midi_mode_unsafe(sscape->io_base); 1121 spin_unlock_irqrestore(&sscape->lock, flags); 1122 } 1123 } 1124 1125 /* 1126 * Now that we have successfully created this sound card, 1127 * it is safe to store the pointer. 1128 * NOTE: we only register the sound card's "destructor" 1129 * function now that our "constructor" has completed. 1130 */ 1131 card->private_free = soundscape_free; 1132 1133 return 0; 1134 1135 _release_dma: 1136 free_dma(dma[dev]); 1137 1138 _release_region: 1139 release_and_free_resource(wss_res); 1140 release_and_free_resource(io_res); 1141 1142 return err; 1143 } 1144 1145 1146 static int snd_sscape_match(struct device *pdev, unsigned int i) 1147 { 1148 /* 1149 * Make sure we were given ALL of the other parameters. 1150 */ 1151 if (port[i] == SNDRV_AUTO_PORT) 1152 return 0; 1153 1154 if (irq[i] == SNDRV_AUTO_IRQ || 1155 mpu_irq[i] == SNDRV_AUTO_IRQ || 1156 dma[i] == SNDRV_AUTO_DMA) { 1157 printk(KERN_INFO 1158 "sscape: insufficient parameters, " 1159 "need IO, IRQ, MPU-IRQ and DMA\n"); 1160 return 0; 1161 } 1162 1163 return 1; 1164 } 1165 1166 static int snd_sscape_probe(struct device *pdev, unsigned int dev) 1167 { 1168 struct snd_card *card; 1169 struct soundscape *sscape; 1170 int ret; 1171 1172 ret = snd_card_new(pdev, index[dev], id[dev], THIS_MODULE, 1173 sizeof(struct soundscape), &card); 1174 if (ret < 0) 1175 return ret; 1176 1177 sscape = get_card_soundscape(card); 1178 sscape->type = SSCAPE; 1179 1180 dma[dev] &= 0x03; 1181 1182 ret = create_sscape(dev, card); 1183 if (ret < 0) 1184 goto _release_card; 1185 1186 ret = snd_card_register(card); 1187 if (ret < 0) { 1188 snd_printk(KERN_ERR "sscape: Failed to register sound card\n"); 1189 goto _release_card; 1190 } 1191 dev_set_drvdata(pdev, card); 1192 return 0; 1193 1194 _release_card: 1195 snd_card_free(card); 1196 return ret; 1197 } 1198 1199 static int snd_sscape_remove(struct device *devptr, unsigned int dev) 1200 { 1201 snd_card_free(dev_get_drvdata(devptr)); 1202 return 0; 1203 } 1204 1205 #define DEV_NAME "sscape" 1206 1207 static struct isa_driver snd_sscape_driver = { 1208 .match = snd_sscape_match, 1209 .probe = snd_sscape_probe, 1210 .remove = snd_sscape_remove, 1211 /* FIXME: suspend/resume */ 1212 .driver = { 1213 .name = DEV_NAME 1214 }, 1215 }; 1216 1217 #ifdef CONFIG_PNP 1218 static inline int get_next_autoindex(int i) 1219 { 1220 while (i < SNDRV_CARDS && port[i] != SNDRV_AUTO_PORT) 1221 ++i; 1222 return i; 1223 } 1224 1225 1226 static int sscape_pnp_detect(struct pnp_card_link *pcard, 1227 const struct pnp_card_device_id *pid) 1228 { 1229 static int idx = 0; 1230 struct pnp_dev *dev; 1231 struct snd_card *card; 1232 struct soundscape *sscape; 1233 int ret; 1234 1235 /* 1236 * Allow this function to fail *quietly* if all the ISA PnP 1237 * devices were configured using module parameters instead. 1238 */ 1239 idx = get_next_autoindex(idx); 1240 if (idx >= SNDRV_CARDS) 1241 return -ENOSPC; 1242 1243 /* 1244 * Check that we still have room for another sound card ... 1245 */ 1246 dev = pnp_request_card_device(pcard, pid->devs[0].id, NULL); 1247 if (!dev) 1248 return -ENODEV; 1249 1250 if (!pnp_is_active(dev)) { 1251 if (pnp_activate_dev(dev) < 0) { 1252 snd_printk(KERN_INFO "sscape: device is inactive\n"); 1253 return -EBUSY; 1254 } 1255 } 1256 1257 /* 1258 * Create a new ALSA sound card entry, in anticipation 1259 * of detecting our hardware ... 1260 */ 1261 ret = snd_card_new(&pcard->card->dev, 1262 index[idx], id[idx], THIS_MODULE, 1263 sizeof(struct soundscape), &card); 1264 if (ret < 0) 1265 return ret; 1266 1267 sscape = get_card_soundscape(card); 1268 1269 /* 1270 * Identify card model ... 1271 */ 1272 if (!strncmp("ENS4081", pid->id, 7)) 1273 sscape->type = SSCAPE_VIVO; 1274 else 1275 sscape->type = SSCAPE_PNP; 1276 1277 /* 1278 * Read the correct parameters off the ISA PnP bus ... 1279 */ 1280 port[idx] = pnp_port_start(dev, 0); 1281 irq[idx] = pnp_irq(dev, 0); 1282 mpu_irq[idx] = pnp_irq(dev, 1); 1283 dma[idx] = pnp_dma(dev, 0) & 0x03; 1284 if (sscape->type == SSCAPE_PNP) { 1285 dma2[idx] = dma[idx]; 1286 wss_port[idx] = CODEC_IO(port[idx]); 1287 } else { 1288 wss_port[idx] = pnp_port_start(dev, 1); 1289 dma2[idx] = pnp_dma(dev, 1); 1290 } 1291 1292 ret = create_sscape(idx, card); 1293 if (ret < 0) 1294 goto _release_card; 1295 1296 ret = snd_card_register(card); 1297 if (ret < 0) { 1298 snd_printk(KERN_ERR "sscape: Failed to register sound card\n"); 1299 goto _release_card; 1300 } 1301 1302 pnp_set_card_drvdata(pcard, card); 1303 ++idx; 1304 return 0; 1305 1306 _release_card: 1307 snd_card_free(card); 1308 return ret; 1309 } 1310 1311 static void sscape_pnp_remove(struct pnp_card_link *pcard) 1312 { 1313 snd_card_free(pnp_get_card_drvdata(pcard)); 1314 pnp_set_card_drvdata(pcard, NULL); 1315 } 1316 1317 static struct pnp_card_driver sscape_pnpc_driver = { 1318 .flags = PNP_DRIVER_RES_DO_NOT_CHANGE, 1319 .name = "sscape", 1320 .id_table = sscape_pnpids, 1321 .probe = sscape_pnp_detect, 1322 .remove = sscape_pnp_remove, 1323 }; 1324 1325 #endif /* CONFIG_PNP */ 1326 1327 static int __init sscape_init(void) 1328 { 1329 int err; 1330 1331 err = isa_register_driver(&snd_sscape_driver, SNDRV_CARDS); 1332 #ifdef CONFIG_PNP 1333 if (!err) 1334 isa_registered = 1; 1335 1336 err = pnp_register_card_driver(&sscape_pnpc_driver); 1337 if (!err) 1338 pnp_registered = 1; 1339 1340 if (isa_registered) 1341 err = 0; 1342 #endif 1343 return err; 1344 } 1345 1346 static void __exit sscape_exit(void) 1347 { 1348 #ifdef CONFIG_PNP 1349 if (pnp_registered) 1350 pnp_unregister_card_driver(&sscape_pnpc_driver); 1351 if (isa_registered) 1352 #endif 1353 isa_unregister_driver(&snd_sscape_driver); 1354 } 1355 1356 module_init(sscape_init); 1357 module_exit(sscape_exit); 1358