xref: /linux/sound/firewire/tascam/tascam-transaction.c (revision a4eb44a6435d6d8f9e642407a4a06f65eb90ca04)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * tascam-transaction.c - a part of driver for TASCAM FireWire series
4  *
5  * Copyright (c) 2015 Takashi Sakamoto
6  */
7 
8 #include "tascam.h"
9 
10 /*
11  * When return minus value, given argument is not MIDI status.
12  * When return 0, given argument is a beginning of system exclusive.
13  * When return the others, given argument is MIDI data.
14  */
15 static inline int calculate_message_bytes(u8 status)
16 {
17 	switch (status) {
18 	case 0xf6:	/* Tune request. */
19 	case 0xf8:	/* Timing clock. */
20 	case 0xfa:	/* Start. */
21 	case 0xfb:	/* Continue. */
22 	case 0xfc:	/* Stop. */
23 	case 0xfe:	/* Active sensing. */
24 	case 0xff:	/* System reset. */
25 		return 1;
26 	case 0xf1:	/* MIDI time code quarter frame. */
27 	case 0xf3:	/* Song select. */
28 		return 2;
29 	case 0xf2:	/* Song position pointer. */
30 		return 3;
31 	case 0xf0:	/* Exclusive. */
32 		return 0;
33 	case 0xf7:	/* End of exclusive. */
34 		break;
35 	case 0xf4:	/* Undefined. */
36 	case 0xf5:	/* Undefined. */
37 	case 0xf9:	/* Undefined. */
38 	case 0xfd:	/* Undefined. */
39 		break;
40 	default:
41 		switch (status & 0xf0) {
42 		case 0x80:	/* Note on. */
43 		case 0x90:	/* Note off. */
44 		case 0xa0:	/* Polyphonic key pressure. */
45 		case 0xb0:	/* Control change and Mode change. */
46 		case 0xe0:	/* Pitch bend change. */
47 			return 3;
48 		case 0xc0:	/* Program change. */
49 		case 0xd0:	/* Channel pressure. */
50 			return 2;
51 		default:
52 		break;
53 		}
54 	break;
55 	}
56 
57 	return -EINVAL;
58 }
59 
60 static int fill_message(struct snd_fw_async_midi_port *port,
61 			struct snd_rawmidi_substream *substream)
62 {
63 	int i, len, consume;
64 	u8 *label, *msg;
65 	u8 status;
66 
67 	/* The first byte is used for label, the rest for MIDI bytes. */
68 	label = port->buf;
69 	msg = port->buf + 1;
70 
71 	consume = snd_rawmidi_transmit_peek(substream, msg, 3);
72 	if (consume == 0)
73 		return 0;
74 
75 	/* On exclusive message. */
76 	if (port->on_sysex) {
77 		/* Seek the end of exclusives. */
78 		for (i = 0; i < consume; ++i) {
79 			if (msg[i] == 0xf7) {
80 				port->on_sysex = false;
81 				break;
82 			}
83 		}
84 
85 		/* At the end of exclusive message, use label 0x07. */
86 		if (!port->on_sysex) {
87 			consume = i + 1;
88 			*label = (substream->number << 4) | 0x07;
89 		/* During exclusive message, use label 0x04. */
90 		} else if (consume == 3) {
91 			*label = (substream->number << 4) | 0x04;
92 		/* We need to fill whole 3 bytes. Go to next change. */
93 		} else {
94 			return 0;
95 		}
96 
97 		len = consume;
98 	} else {
99 		/* The beginning of exclusives. */
100 		if (msg[0] == 0xf0) {
101 			/* Transfer it in next chance in another condition. */
102 			port->on_sysex = true;
103 			return 0;
104 		} else {
105 			/* On running-status. */
106 			if ((msg[0] & 0x80) != 0x80)
107 				status = port->running_status;
108 			else
109 				status = msg[0];
110 
111 			/* Calculate consume bytes. */
112 			len = calculate_message_bytes(status);
113 			if (len <= 0)
114 				return 0;
115 
116 			/* On running-status. */
117 			if ((msg[0] & 0x80) != 0x80) {
118 				/* Enough MIDI bytes were not retrieved. */
119 				if (consume < len - 1)
120 					return 0;
121 				consume = len - 1;
122 
123 				msg[2] = msg[1];
124 				msg[1] = msg[0];
125 				msg[0] = port->running_status;
126 			} else {
127 				/* Enough MIDI bytes were not retrieved. */
128 				if (consume < len)
129 					return 0;
130 				consume = len;
131 
132 				port->running_status = msg[0];
133 			}
134 		}
135 
136 		*label = (substream->number << 4) | (msg[0] >> 4);
137 	}
138 
139 	if (len > 0 && len < 3)
140 		memset(msg + len, 0, 3 - len);
141 
142 	return consume;
143 }
144 
145 static void async_midi_port_callback(struct fw_card *card, int rcode,
146 				     void *data, size_t length,
147 				     void *callback_data)
148 {
149 	struct snd_fw_async_midi_port *port = callback_data;
150 	struct snd_rawmidi_substream *substream = READ_ONCE(port->substream);
151 
152 	/* This port is closed. */
153 	if (substream == NULL)
154 		return;
155 
156 	if (rcode == RCODE_COMPLETE)
157 		snd_rawmidi_transmit_ack(substream, port->consume_bytes);
158 	else if (!rcode_is_permanent_error(rcode))
159 		/* To start next transaction immediately for recovery. */
160 		port->next_ktime = 0;
161 	else
162 		/* Don't continue processing. */
163 		port->error = true;
164 
165 	port->idling = true;
166 
167 	if (!snd_rawmidi_transmit_empty(substream))
168 		schedule_work(&port->work);
169 }
170 
171 static void midi_port_work(struct work_struct *work)
172 {
173 	struct snd_fw_async_midi_port *port =
174 			container_of(work, struct snd_fw_async_midi_port, work);
175 	struct snd_rawmidi_substream *substream = READ_ONCE(port->substream);
176 	int generation;
177 
178 	/* Under transacting or error state. */
179 	if (!port->idling || port->error)
180 		return;
181 
182 	/* Nothing to do. */
183 	if (substream == NULL || snd_rawmidi_transmit_empty(substream))
184 		return;
185 
186 	/* Do it in next chance. */
187 	if (ktime_after(port->next_ktime, ktime_get())) {
188 		schedule_work(&port->work);
189 		return;
190 	}
191 
192 	/*
193 	 * Fill the buffer. The callee must use snd_rawmidi_transmit_peek().
194 	 * Later, snd_rawmidi_transmit_ack() is called.
195 	 */
196 	memset(port->buf, 0, 4);
197 	port->consume_bytes = fill_message(port, substream);
198 	if (port->consume_bytes <= 0) {
199 		/* Do it in next chance, immediately. */
200 		if (port->consume_bytes == 0) {
201 			port->next_ktime = 0;
202 			schedule_work(&port->work);
203 		} else {
204 			/* Fatal error. */
205 			port->error = true;
206 		}
207 		return;
208 	}
209 
210 	/* Set interval to next transaction. */
211 	port->next_ktime = ktime_add_ns(ktime_get(),
212 			port->consume_bytes * 8 * (NSEC_PER_SEC / 31250));
213 
214 	/* Start this transaction. */
215 	port->idling = false;
216 
217 	/*
218 	 * In Linux FireWire core, when generation is updated with memory
219 	 * barrier, node id has already been updated. In this module, After
220 	 * this smp_rmb(), load/store instructions to memory are completed.
221 	 * Thus, both of generation and node id are available with recent
222 	 * values. This is a light-serialization solution to handle bus reset
223 	 * events on IEEE 1394 bus.
224 	 */
225 	generation = port->parent->generation;
226 	smp_rmb();
227 
228 	fw_send_request(port->parent->card, &port->transaction,
229 			TCODE_WRITE_QUADLET_REQUEST,
230 			port->parent->node_id, generation,
231 			port->parent->max_speed,
232 			TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_RX_QUAD,
233 			port->buf, 4, async_midi_port_callback,
234 			port);
235 }
236 
237 void snd_fw_async_midi_port_init(struct snd_fw_async_midi_port *port)
238 {
239 	port->idling = true;
240 	port->error = false;
241 	port->running_status = 0;
242 	port->on_sysex = false;
243 }
244 
245 static void handle_midi_tx(struct fw_card *card, struct fw_request *request,
246 			   int tcode, int destination, int source,
247 			   int generation, unsigned long long offset,
248 			   void *data, size_t length, void *callback_data)
249 {
250 	struct snd_tscm *tscm = callback_data;
251 	u32 *buf = (u32 *)data;
252 	unsigned int messages;
253 	unsigned int i;
254 	unsigned int port;
255 	struct snd_rawmidi_substream *substream;
256 	u8 *b;
257 	int bytes;
258 
259 	if (offset != tscm->async_handler.offset)
260 		goto end;
261 
262 	messages = length / 8;
263 	for (i = 0; i < messages; i++) {
264 		b = (u8 *)(buf + i * 2);
265 
266 		port = b[0] >> 4;
267 		/* TODO: support virtual MIDI ports. */
268 		if (port >= tscm->spec->midi_capture_ports)
269 			goto end;
270 
271 		/* Assume the message length. */
272 		bytes = calculate_message_bytes(b[1]);
273 		/* On MIDI data or exclusives. */
274 		if (bytes <= 0) {
275 			/* Seek the end of exclusives. */
276 			for (bytes = 1; bytes < 4; bytes++) {
277 				if (b[bytes] == 0xf7)
278 					break;
279 			}
280 			if (bytes == 4)
281 				bytes = 3;
282 		}
283 
284 		substream = READ_ONCE(tscm->tx_midi_substreams[port]);
285 		if (substream != NULL)
286 			snd_rawmidi_receive(substream, b + 1, bytes);
287 	}
288 end:
289 	fw_send_response(card, request, RCODE_COMPLETE);
290 }
291 
292 int snd_tscm_transaction_register(struct snd_tscm *tscm)
293 {
294 	static const struct fw_address_region resp_register_region = {
295 		.start	= 0xffffe0000000ull,
296 		.end	= 0xffffe000ffffull,
297 	};
298 	unsigned int i;
299 	int err;
300 
301 	/*
302 	 * Usually, two quadlets are transferred by one transaction. The first
303 	 * quadlet has MIDI messages, the rest includes timestamp.
304 	 * Sometimes, 8 set of the data is transferred by a block transaction.
305 	 */
306 	tscm->async_handler.length = 8 * 8;
307 	tscm->async_handler.address_callback = handle_midi_tx;
308 	tscm->async_handler.callback_data = tscm;
309 
310 	err = fw_core_add_address_handler(&tscm->async_handler,
311 					  &resp_register_region);
312 	if (err < 0)
313 		return err;
314 
315 	err = snd_tscm_transaction_reregister(tscm);
316 	if (err < 0)
317 		goto error;
318 
319 	for (i = 0; i < TSCM_MIDI_OUT_PORT_MAX; i++) {
320 		tscm->out_ports[i].parent = fw_parent_device(tscm->unit);
321 		tscm->out_ports[i].next_ktime = 0;
322 		INIT_WORK(&tscm->out_ports[i].work, midi_port_work);
323 	}
324 
325 	return err;
326 error:
327 	fw_core_remove_address_handler(&tscm->async_handler);
328 	tscm->async_handler.callback_data = NULL;
329 	return err;
330 }
331 
332 /* At bus reset, these registers are cleared. */
333 int snd_tscm_transaction_reregister(struct snd_tscm *tscm)
334 {
335 	struct fw_device *device = fw_parent_device(tscm->unit);
336 	__be32 reg;
337 	int err;
338 
339 	/* Register messaging address. Block transaction is not allowed. */
340 	reg = cpu_to_be32((device->card->node_id << 16) |
341 			  (tscm->async_handler.offset >> 32));
342 	err = snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
343 				 TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ADDR_HI,
344 				 &reg, sizeof(reg), 0);
345 	if (err < 0)
346 		return err;
347 
348 	reg = cpu_to_be32(tscm->async_handler.offset);
349 	err = snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
350 				 TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ADDR_LO,
351 				 &reg, sizeof(reg), 0);
352 	if (err < 0)
353 		return err;
354 
355 	/* Turn on messaging. */
356 	reg = cpu_to_be32(0x00000001);
357 	err = snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
358 				  TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ON,
359 				  &reg, sizeof(reg), 0);
360 	if (err < 0)
361 		return err;
362 
363 	/* Turn on FireWire LED. */
364 	reg = cpu_to_be32(0x0001008e);
365 	return snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
366 				  TSCM_ADDR_BASE + TSCM_OFFSET_LED_POWER,
367 				  &reg, sizeof(reg), 0);
368 }
369 
370 void snd_tscm_transaction_unregister(struct snd_tscm *tscm)
371 {
372 	__be32 reg;
373 
374 	if (tscm->async_handler.callback_data == NULL)
375 		return;
376 
377 	/* Turn off FireWire LED. */
378 	reg = cpu_to_be32(0x0000008e);
379 	snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
380 			   TSCM_ADDR_BASE + TSCM_OFFSET_LED_POWER,
381 			   &reg, sizeof(reg), 0);
382 
383 	/* Turn off messaging. */
384 	reg = cpu_to_be32(0x00000000);
385 	snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
386 			   TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ON,
387 			   &reg, sizeof(reg), 0);
388 
389 	/* Unregister the address. */
390 	snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
391 			   TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ADDR_HI,
392 			   &reg, sizeof(reg), 0);
393 	snd_fw_transaction(tscm->unit, TCODE_WRITE_QUADLET_REQUEST,
394 			   TSCM_ADDR_BASE + TSCM_OFFSET_MIDI_TX_ADDR_LO,
395 			   &reg, sizeof(reg), 0);
396 
397 	fw_core_remove_address_handler(&tscm->async_handler);
398 	tscm->async_handler.callback_data = NULL;
399 }
400