1#!/bin/bash 2# SPDX-License-Identifier: GPL-2.0 3# 4# Translate stack dump function offsets. 5# 6# addr2line doesn't work with KASLR addresses. This works similarly to 7# addr2line, but instead takes the 'func+0x123' format as input: 8# 9# $ ./scripts/faddr2line ~/k/vmlinux meminfo_proc_show+0x5/0x568 10# meminfo_proc_show+0x5/0x568: 11# meminfo_proc_show at fs/proc/meminfo.c:27 12# 13# If the address is part of an inlined function, the full inline call chain is 14# printed: 15# 16# $ ./scripts/faddr2line ~/k/vmlinux native_write_msr+0x6/0x27 17# native_write_msr+0x6/0x27: 18# arch_static_branch at arch/x86/include/asm/msr.h:121 19# (inlined by) static_key_false at include/linux/jump_label.h:125 20# (inlined by) native_write_msr at arch/x86/include/asm/msr.h:125 21# 22# The function size after the '/' in the input is optional, but recommended. 23# It's used to help disambiguate any duplicate symbol names, which can occur 24# rarely. If the size is omitted for a duplicate symbol then it's possible for 25# multiple code sites to be printed: 26# 27# $ ./scripts/faddr2line ~/k/vmlinux raw_ioctl+0x5 28# raw_ioctl+0x5/0x20: 29# raw_ioctl at drivers/char/raw.c:122 30# 31# raw_ioctl+0x5/0xb1: 32# raw_ioctl at net/ipv4/raw.c:876 33# 34# Multiple addresses can be specified on a single command line: 35# 36# $ ./scripts/faddr2line ~/k/vmlinux type_show+0x10/45 free_reserved_area+0x90 37# type_show+0x10/0x2d: 38# type_show at drivers/video/backlight/backlight.c:213 39# 40# free_reserved_area+0x90/0x123: 41# free_reserved_area at mm/page_alloc.c:6429 (discriminator 2) 42 43 44set -o errexit 45set -o nounset 46 47usage() { 48 echo "usage: faddr2line [--list] <object file> <func+offset> <func+offset>..." >&2 49 exit 1 50} 51 52warn() { 53 echo "$1" >&2 54} 55 56die() { 57 echo "ERROR: $1" >&2 58 exit 1 59} 60 61READELF="${CROSS_COMPILE:-}readelf" 62ADDR2LINE="${CROSS_COMPILE:-}addr2line" 63AWK="awk" 64GREP="grep" 65 66command -v ${AWK} >/dev/null 2>&1 || die "${AWK} isn't installed" 67command -v ${READELF} >/dev/null 2>&1 || die "${READELF} isn't installed" 68command -v ${ADDR2LINE} >/dev/null 2>&1 || die "${ADDR2LINE} isn't installed" 69 70# Try to figure out the source directory prefix so we can remove it from the 71# addr2line output. HACK ALERT: This assumes that start_kernel() is in 72# init/main.c! This only works for vmlinux. Otherwise it falls back to 73# printing the absolute path. 74find_dir_prefix() { 75 local objfile=$1 76 77 local start_kernel_addr=$(${READELF} --symbols --wide $objfile | ${AWK} '$8 == "start_kernel" {printf "0x%s", $2}') 78 [[ -z $start_kernel_addr ]] && return 79 80 local file_line=$(${ADDR2LINE} -e $objfile $start_kernel_addr) 81 [[ -z $file_line ]] && return 82 83 local prefix=${file_line%init/main.c:*} 84 if [[ -z $prefix ]] || [[ $prefix = $file_line ]]; then 85 return 86 fi 87 88 DIR_PREFIX=$prefix 89 return 0 90} 91 92__faddr2line() { 93 local objfile=$1 94 local func_addr=$2 95 local dir_prefix=$3 96 local print_warnings=$4 97 98 local sym_name=${func_addr%+*} 99 local func_offset=${func_addr#*+} 100 func_offset=${func_offset%/*} 101 local user_size= 102 local file_type 103 local is_vmlinux=0 104 [[ $func_addr =~ "/" ]] && user_size=${func_addr#*/} 105 106 if [[ -z $sym_name ]] || [[ -z $func_offset ]] || [[ $sym_name = $func_addr ]]; then 107 warn "bad func+offset $func_addr" 108 DONE=1 109 return 110 fi 111 112 # vmlinux uses absolute addresses in the section table rather than 113 # section offsets. 114 local file_type=$(${READELF} --file-header $objfile | 115 ${AWK} '$1 == "Type:" { print $2; exit }') 116 if [[ $file_type = "EXEC" ]] || [[ $file_type == "DYN" ]]; then 117 is_vmlinux=1 118 fi 119 120 # Go through each of the object's symbols which match the func name. 121 # In rare cases there might be duplicates, in which case we print all 122 # matches. 123 while read line; do 124 local fields=($line) 125 local sym_addr=0x${fields[1]} 126 local sym_elf_size=${fields[2]} 127 local sym_sec=${fields[6]} 128 local sec_size 129 local sec_name 130 131 # Get the section size: 132 sec_size=$(${READELF} --section-headers --wide $objfile | 133 sed 's/\[ /\[/' | 134 ${AWK} -v sec=$sym_sec '$1 == "[" sec "]" { print "0x" $6; exit }') 135 136 if [[ -z $sec_size ]]; then 137 warn "bad section size: section: $sym_sec" 138 DONE=1 139 return 140 fi 141 142 # Get the section name: 143 sec_name=$(${READELF} --section-headers --wide $objfile | 144 sed 's/\[ /\[/' | 145 ${AWK} -v sec=$sym_sec '$1 == "[" sec "]" { print $2; exit }') 146 147 if [[ -z $sec_name ]]; then 148 warn "bad section name: section: $sym_sec" 149 DONE=1 150 return 151 fi 152 153 # Calculate the symbol size. 154 # 155 # Unfortunately we can't use the ELF size, because kallsyms 156 # also includes the padding bytes in its size calculation. For 157 # kallsyms, the size calculation is the distance between the 158 # symbol and the next symbol in a sorted list. 159 local sym_size 160 local cur_sym_addr 161 local found=0 162 while read line; do 163 local fields=($line) 164 cur_sym_addr=0x${fields[1]} 165 local cur_sym_elf_size=${fields[2]} 166 local cur_sym_name=${fields[7]:-} 167 168 if [[ $cur_sym_addr = $sym_addr ]] && 169 [[ $cur_sym_elf_size = $sym_elf_size ]] && 170 [[ $cur_sym_name = $sym_name ]]; then 171 found=1 172 continue 173 fi 174 175 if [[ $found = 1 ]]; then 176 sym_size=$(($cur_sym_addr - $sym_addr)) 177 [[ $sym_size -lt $sym_elf_size ]] && continue; 178 found=2 179 break 180 fi 181 done < <(${READELF} --symbols --wide $objfile | ${AWK} -v sec=$sym_sec '$7 == sec' | sort --key=2) 182 183 if [[ $found = 0 ]]; then 184 warn "can't find symbol: sym_name: $sym_name sym_sec: $sym_sec sym_addr: $sym_addr sym_elf_size: $sym_elf_size" 185 DONE=1 186 return 187 fi 188 189 # If nothing was found after the symbol, assume it's the last 190 # symbol in the section. 191 [[ $found = 1 ]] && sym_size=$(($sec_size - $sym_addr)) 192 193 if [[ -z $sym_size ]] || [[ $sym_size -le 0 ]]; then 194 warn "bad symbol size: sym_addr: $sym_addr cur_sym_addr: $cur_sym_addr" 195 DONE=1 196 return 197 fi 198 199 sym_size=0x$(printf %x $sym_size) 200 201 # Calculate the address from user-supplied offset: 202 local addr=$(($sym_addr + $func_offset)) 203 if [[ -z $addr ]] || [[ $addr = 0 ]]; then 204 warn "bad address: $sym_addr + $func_offset" 205 DONE=1 206 return 207 fi 208 addr=0x$(printf %x $addr) 209 210 # If the user provided a size, make sure it matches the symbol's size: 211 if [[ -n $user_size ]] && [[ $user_size -ne $sym_size ]]; then 212 [[ $print_warnings = 1 ]] && 213 echo "skipping $sym_name address at $addr due to size mismatch ($user_size != $sym_size)" 214 continue; 215 fi 216 217 # Make sure the provided offset is within the symbol's range: 218 if [[ $func_offset -gt $sym_size ]]; then 219 [[ $print_warnings = 1 ]] && 220 echo "skipping $sym_name address at $addr due to size mismatch ($func_offset > $sym_size)" 221 continue 222 fi 223 224 # In case of duplicates or multiple addresses specified on the 225 # cmdline, separate multiple entries with a blank line: 226 [[ $FIRST = 0 ]] && echo 227 FIRST=0 228 229 echo "$sym_name+$func_offset/$sym_size:" 230 231 # Pass section address to addr2line and strip absolute paths 232 # from the output: 233 local args="--functions --pretty-print --inlines --exe=$objfile" 234 [[ $is_vmlinux = 0 ]] && args="$args --section=$sec_name" 235 local output=$(${ADDR2LINE} $args $addr | sed "s; $dir_prefix\(\./\)*; ;") 236 [[ -z $output ]] && continue 237 238 # Default output (non --list): 239 if [[ $LIST = 0 ]]; then 240 echo "$output" | while read -r line 241 do 242 echo $line 243 done 244 DONE=1; 245 continue 246 fi 247 248 # For --list, show each line with its corresponding source code: 249 echo "$output" | while read -r line 250 do 251 echo 252 echo $line 253 n=$(echo $line | sed 's/.*:\([0-9]\+\).*/\1/g') 254 n1=$[$n-5] 255 n2=$[$n+5] 256 f=$(echo $line | sed 's/.*at \(.\+\):.*/\1/g') 257 ${AWK} 'NR>=strtonum("'$n1'") && NR<=strtonum("'$n2'") { if (NR=='$n') printf(">%d<", NR); else printf(" %d ", NR); printf("\t%s\n", $0)}' $f 258 done 259 260 DONE=1 261 262 done < <(${READELF} --symbols --wide $objfile | ${AWK} -v fn=$sym_name '$4 == "FUNC" && $8 == fn') 263} 264 265[[ $# -lt 2 ]] && usage 266 267objfile=$1 268 269LIST=0 270[[ "$objfile" == "--list" ]] && LIST=1 && shift && objfile=$1 271 272[[ ! -f $objfile ]] && die "can't find objfile $objfile" 273shift 274 275${READELF} --section-headers --wide $objfile | ${GREP} -q '\.debug_info' || die "CONFIG_DEBUG_INFO not enabled" 276 277DIR_PREFIX=supercalifragilisticexpialidocious 278find_dir_prefix $objfile 279 280FIRST=1 281while [[ $# -gt 0 ]]; do 282 func_addr=$1 283 shift 284 285 # print any matches found 286 DONE=0 287 __faddr2line $objfile $func_addr $DIR_PREFIX 0 288 289 # if no match was found, print warnings 290 if [[ $DONE = 0 ]]; then 291 __faddr2line $objfile $func_addr $DIR_PREFIX 1 292 warn "no match for $func_addr" 293 fi 294done 295