xref: /linux/scripts/dtc/include-prefixes/powerpc/fsl/t1023si-post.dtsi (revision ff2632d7d08edc11e8bd0629e9fcfebab25c78b4)

/*
 * T1023 Silicon/SoC Device Tree Source (post include)
 *
 * Copyright 2014 Freescale Semiconductor Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *	 notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *	 notice, this list of conditions and the following disclaimer in the
 *	 documentation and/or other materials provided with the distribution.
 *     * Neither the name of Freescale Semiconductor nor the
 *	 names of its contributors may be used to endorse or promote products
 *	 derived from this software without specific prior written permission.
 *
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") as published by the Free Software
 * Foundation, either version 2 of that License or (at your option) any
 * later version.
 *
 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <dt-bindings/thermal/thermal.h>

&bman_fbpr {
	compatible = "fsl,bman-fbpr";
	alloc-ranges = <0 0 0x10000 0>;
};

&qman_fqd {
	compatible = "fsl,qman-fqd";
	alloc-ranges = <0 0 0x10000 0>;
};

&qman_pfdr {
	compatible = "fsl,qman-pfdr";
	alloc-ranges = <0 0 0x10000 0>;
};

&ifc {
	#address-cells = <2>;
	#size-cells = <1>;
	compatible = "fsl,ifc";
	interrupts = <25 2 0 0>;
};

&pci0 {
	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0x0 0xff>;
	interrupts = <20 2 0 0>;
	fsl,iommu-parent = <&pamu0>;
	pcie@0 {
		reg = <0 0 0 0 0>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		interrupts = <20 2 0 0>;
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
			/* IDSEL 0x0 */
			0000 0 0 1 &mpic 40 1 0 0
			0000 0 0 2 &mpic 1 1 0 0
			0000 0 0 3 &mpic 2 1 0 0
			0000 0 0 4 &mpic 3 1 0 0
			>;
	};
};

&pci1 {
	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0 0xff>;
	interrupts = <21 2 0 0>;
	fsl,iommu-parent = <&pamu0>;
	pcie@0 {
		reg = <0 0 0 0 0>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		interrupts = <21 2 0 0>;
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
			/* IDSEL 0x0 */
			0000 0 0 1 &mpic 41 1 0 0
			0000 0 0 2 &mpic 5 1 0 0
			0000 0 0 3 &mpic 6 1 0 0
			0000 0 0 4 &mpic 7 1 0 0
			>;
	};
};

&pci2 {
	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0x0 0xff>;
	interrupts = <22 2 0 0>;
	fsl,iommu-parent = <&pamu0>;
	pcie@0 {
		reg = <0 0 0 0 0>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		interrupts = <22 2 0 0>;
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
			/* IDSEL 0x0 */
			0000 0 0 1 &mpic 42 1 0 0
			0000 0 0 2 &mpic 9 1 0 0
			0000 0 0 3 &mpic 10 1 0 0
			0000 0 0 4 &mpic 11 1 0 0
			>;
	};
};

&dcsr {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "fsl,dcsr", "simple-bus";

	dcsr-epu@0 {
		compatible = "fsl,t1023-dcsr-epu", "fsl,dcsr-epu";
		interrupts = <52 2 0 0
			      84 2 0 0
			      85 2 0 0>;
		reg = <0x0 0x1000>;
	};
	dcsr-npc {
		compatible = "fsl,t1023-dcsr-cnpc", "fsl,dcsr-cnpc";
		reg = <0x1000 0x1000 0x1002000 0x10000>;
	};
	dcsr-nxc@2000 {
		compatible = "fsl,dcsr-nxc";
		reg = <0x2000 0x1000>;
	};
	dcsr-corenet {
		compatible = "fsl,dcsr-corenet";
		reg = <0x8000 0x1000 0x1A000 0x1000>;
	};
	dcsr-ocn@11000 {
		compatible = "fsl,t1023-dcsr-ocn", "fsl,dcsr-ocn";
		reg = <0x11000 0x1000>;
	};
	dcsr-ddr@12000 {
		compatible = "fsl,dcsr-ddr";
		dev-handle = <&ddr1>;
		reg = <0x12000 0x1000>;
	};
	dcsr-nal@18000 {
		compatible = "fsl,t1023-dcsr-nal", "fsl,dcsr-nal";
		reg = <0x18000 0x1000>;
	};
	dcsr-rcpm@22000 {
		compatible = "fsl,t1023-dcsr-rcpm", "fsl,dcsr-rcpm";
		reg = <0x22000 0x1000>;
	};
	dcsr-snpc@30000 {
		compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
		reg = <0x30000 0x1000 0x1022000 0x10000>;
	};
	dcsr-snpc@31000 {
		compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
		reg = <0x31000 0x1000 0x1042000 0x10000>;
	};
	dcsr-cpu-sb-proxy@100000 {
		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
		cpu-handle = <&cpu0>;
		reg = <0x100000 0x1000 0x101000 0x1000>;
	};
	dcsr-cpu-sb-proxy@108000 {
		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
		cpu-handle = <&cpu1>;
		reg = <0x108000 0x1000 0x109000 0x1000>;
	};
};

&bportals {
	#address-cells = <0x1>;
	#size-cells = <0x1>;
	compatible = "simple-bus";

	bman-portal@0 {
		cell-index = <0x0>;
		compatible = "fsl,bman-portal";
		reg = <0x0 0x4000>, <0x1000000 0x1000>;
		interrupts = <105 2 0 0>;
	};
	bman-portal@4000 {
		cell-index = <0x1>;
		compatible = "fsl,bman-portal";
		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
		interrupts = <107 2 0 0>;
	};
	bman-portal@8000 {
		cell-index = <2>;
		compatible = "fsl,bman-portal";
		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
		interrupts = <109 2 0 0>;
	};
	bman-portal@c000 {
		cell-index = <0x3>;
		compatible = "fsl,bman-portal";
		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
		interrupts = <111 2 0 0>;
	};
	bman-portal@10000 {
		cell-index = <0x4>;
		compatible = "fsl,bman-portal";
		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
		interrupts = <113 2 0 0>;
	};
	bman-portal@14000 {
		cell-index = <0x5>;
		compatible = "fsl,bman-portal";
		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
		interrupts = <115 2 0 0>;
	};
};

&qportals {
	#address-cells = <0x1>;
	#size-cells = <0x1>;
	compatible = "simple-bus";

	qportal0: qman-portal@0 {
		compatible = "fsl,qman-portal";
		reg = <0x0 0x4000>, <0x1000000 0x1000>;
		interrupts = <104 0x2 0 0>;
		cell-index = <0x0>;
	};
	qportal1: qman-portal@4000 {
		compatible = "fsl,qman-portal";
		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
		interrupts = <106 0x2 0 0>;
		cell-index = <0x1>;
	};
	qportal2: qman-portal@8000 {
		compatible = "fsl,qman-portal";
		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
		interrupts = <108 0x2 0 0>;
		cell-index = <0x2>;
	};
	qportal3: qman-portal@c000 {
		compatible = "fsl,qman-portal";
		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
		interrupts = <110 0x2 0 0>;
		cell-index = <0x3>;
	};
	qportal4: qman-portal@10000 {
		compatible = "fsl,qman-portal";
		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
		interrupts = <112 0x2 0 0>;
		cell-index = <0x4>;
	};
	qportal5: qman-portal@14000 {
		compatible = "fsl,qman-portal";
		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
		interrupts = <114 0x2 0 0>;
		cell-index = <0x5>;
	};
};

&soc {
	#address-cells = <1>;
	#size-cells = <1>;
	device_type = "soc";
	compatible = "simple-bus";

	soc-sram-error {
		compatible = "fsl,soc-sram-error";
		interrupts = <16 2 1 29>;
	};

	corenet-law@0 {
		compatible = "fsl,corenet-law";
		reg = <0x0 0x1000>;
		fsl,num-laws = <16>;
	};

	ddr1: memory-controller@8000 {
		compatible = "fsl,qoriq-memory-controller-v5.0",
				"fsl,qoriq-memory-controller";
		reg = <0x8000 0x1000>;
		interrupts = <16 2 1 23>;
	};

	cpc: l3-cache-controller@10000 {
		compatible = "fsl,t1023-l3-cache-controller", "cache";
		reg = <0x10000 0x1000>;
		interrupts = <16 2 1 27>;
	};

	corenet-cf@18000 {
		compatible = "fsl,corenet2-cf";
		reg = <0x18000 0x1000>;
		interrupts = <16 2 1 31>;
	};

	iommu@20000 {
		compatible = "fsl,pamu-v1.0", "fsl,pamu";
		reg = <0x20000 0x1000>;
		ranges = <0 0x20000 0x1000>;
		#address-cells = <1>;
		#size-cells = <1>;
		interrupts = <
			24 2 0 0
			16 2 1 30>;
		pamu0: pamu@0 {
			reg = <0 0x1000>;
			fsl,primary-cache-geometry = <128 1>;
			fsl,secondary-cache-geometry = <32 2>;
		};
	};

/include/ "qoriq-mpic.dtsi"

	guts: global-utilities@e0000 {
		compatible = "fsl,t1023-device-config", "fsl,qoriq-device-config-2.0";
		reg = <0xe0000 0xe00>;
		fsl,has-rstcr;
		fsl,liodn-bits = <12>;
	};

/include/ "qoriq-clockgen2.dtsi"
	global-utilities@e1000 {
		compatible = "fsl,t1023-clockgen", "fsl,qoriq-clockgen-2.0";
	};

	rcpm: global-utilities@e2000 {
		compatible = "fsl,t1023-rcpm", "fsl,qoriq-rcpm-2.1";
		reg = <0xe2000 0x1000>;
	};

	sfp: sfp@e8000 {
		compatible = "fsl,t1023-sfp";
		reg = <0xe8000 0x1000>;
	};

	serdes: serdes@ea000 {
		compatible = "fsl,t1023-serdes";
		reg = <0xea000 0x4000>;
	};

	tmu: tmu@f0000 {
		compatible = "fsl,qoriq-tmu";
		reg = <0xf0000 0x1000>;
		interrupts = <18 2 0 0>;
		fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>;
		fsl,tmu-calibration =
				<0x00000000 0x0000000f>,
				<0x00000001 0x00000017>,
				<0x00000002 0x0000001e>,
				<0x00000003 0x00000026>,
				<0x00000004 0x0000002e>,
				<0x00000005 0x00000035>,
				<0x00000006 0x0000003d>,
				<0x00000007 0x00000044>,
				<0x00000008 0x0000004c>,
				<0x00000009 0x00000053>,
				<0x0000000a 0x0000005b>,
				<0x0000000b 0x00000064>,

				<0x00010000 0x00000011>,
				<0x00010001 0x0000001c>,
				<0x00010002 0x00000024>,
				<0x00010003 0x0000002b>,
				<0x00010004 0x00000034>,
				<0x00010005 0x00000039>,
				<0x00010006 0x00000042>,
				<0x00010007 0x0000004c>,
				<0x00010008 0x00000051>,
				<0x00010009 0x0000005a>,
				<0x0001000a 0x00000063>,

				<0x00020000 0x00000013>,
				<0x00020001 0x00000019>,
				<0x00020002 0x00000024>,
				<0x00020003 0x0000002c>,
				<0x00020004 0x00000035>,
				<0x00020005 0x0000003d>,
				<0x00020006 0x00000046>,
				<0x00020007 0x00000050>,
				<0x00020008 0x00000059>,

				<0x00030000 0x00000002>,
				<0x00030001 0x0000000d>,
				<0x00030002 0x00000019>,
				<0x00030003 0x00000024>;
		#thermal-sensor-cells = <1>;
	};

	thermal-zones {
		cpu_thermal: cpu-thermal {
			polling-delay-passive = <1000>;
			polling-delay = <5000>;

			thermal-sensors = <&tmu 0>;

			trips {
				cpu_alert: cpu-alert {
					temperature = <85000>;
					hysteresis = <2000>;
					type = "passive";
				};
				cpu_crit: cpu-crit {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu_alert>;
					cooling-device =
						<&cpu0 THERMAL_NO_LIMIT
							THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu_alert>;
					cooling-device =
						<&cpu1 THERMAL_NO_LIMIT
							THERMAL_NO_LIMIT>;
				};
			};
		};
	};

	scfg: global-utilities@fc000 {
		compatible = "fsl,t1023-scfg";
		reg = <0xfc000 0x1000>;
	};

/include/ "elo3-dma-0.dtsi"
/include/ "elo3-dma-1.dtsi"

/include/ "qoriq-espi-0.dtsi"
	spi@110000 {
		fsl,espi-num-chipselects = <4>;
	};

/include/ "qoriq-esdhc-0.dtsi"
	sdhc@114000 {
		compatible = "fsl,t1023-esdhc", "fsl,esdhc";
		fsl,iommu-parent = <&pamu0>;
		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
		sdhci,auto-cmd12;
		no-1-8-v;
	};
/include/ "qoriq-i2c-0.dtsi"
/include/ "qoriq-i2c-1.dtsi"
/include/ "qoriq-duart-0.dtsi"
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-gpio-1.dtsi"
/include/ "qoriq-gpio-2.dtsi"
/include/ "qoriq-gpio-3.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
	usb0: usb@210000 {
		compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
		fsl,iommu-parent = <&pamu0>;
		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
		phy_type = "utmi";
		port0;
	};
/include/ "qoriq-usb2-dr-0.dtsi"
	usb1: usb@211000 {
		compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
		fsl,iommu-parent = <&pamu0>;
		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
		dr_mode = "host";
		phy_type = "utmi";
	};
/include/ "qoriq-sata2-0.dtsi"
	sata@220000 {
		fsl,iommu-parent = <&pamu0>;
		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
	};

/include/ "qoriq-sec5.0-0.dtsi"
/include/ "qoriq-qman3.dtsi"
/include/ "qoriq-bman1.dtsi"

/include/ "qoriq-fman3l-0.dtsi"
/include/ "qoriq-fman3-0-10g-0-best-effort.dtsi"
/include/ "qoriq-fman3-0-1g-1.dtsi"
/include/ "qoriq-fman3-0-1g-2.dtsi"
/include/ "qoriq-fman3-0-1g-3.dtsi"
	fman@400000 {
		enet0: ethernet@e0000 {
		};

		enet1: ethernet@e2000 {
		};

		enet2: ethernet@e4000 {
		};

		enet3: ethernet@e6000 {
		};
	};
};