xref: /linux/scripts/dtc/include-prefixes/arm64/rockchip/rk3576-lckfb-tspi-3m.dts (revision 67f8bc848ee31831336bd478e57d2f993551902e)

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2026 LCKFB
 */

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include <dt-bindings/usb/pd.h>
#include "rk3576.dtsi"

/ {
	model = "LCKFB TaishanPi 3M";
	compatible = "lckfb,tspi-3m-rk3576", "rockchip,rk3576";

	aliases {
		mmc0 = &sdhci;
		mmc1 = &sdmmc;
	};

	chosen {
		stdout-path = "serial0:1500000n8";
	};

	adc-keys {
		compatible = "adc-keys";
		io-channels = <&saradc 1>;
		io-channel-names = "buttons";
		keyup-threshold-microvolt = <1800000>;
		poll-interval = <100>;

		button-recovery {
			label = "Recovery";
			linux,code = <KEY_VENDOR>;
			press-threshold-microvolt = <18000>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led-0 {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_HEARTBEAT;
			gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "heartbeat";
		};
	};

	hdmi-con {
		compatible = "hdmi-connector";
		type = "a";

		port {
			hdmi_con_in: endpoint {
				remote-endpoint = <&hdmi_out_con>;
			};
		};
	};

	vcc_5v0_usb2_host: regulator-vcc-5v0-usb2-host {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&usb2_host_pwren>;
		regulator-max-microvolt = <5000000>;
		regulator-min-microvolt = <5000000>;
		regulator-name = "vcc_5v0_usb2_host";
		vin-supply = <&vcc_5v0_sys>;
	};

	vcc_5v0_usb3_host: regulator-vcc-5v0-usb3-host {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&usb3_host_pwren>;
		regulator-max-microvolt = <5000000>;
		regulator-min-microvolt = <5000000>;
		regulator-name = "vcc_5v0_usb3_host";
		vin-supply = <&vcc_5v0_sys>;
	};

	vcc_5v0_typec: regulator-vcc-5v0-typec {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&typec_vbus_en>;
		regulator-max-microvolt = <5000000>;
		regulator-min-microvolt = <5000000>;
		regulator-name = "vcc_5v0_typec";
		vin-supply = <&vcc_5v0_sys>;
	};

	vcc_5v0_sys: regulator-vcc-5v0-sys {
		compatible = "regulator-fixed";
		regulator-name = "vcc_5v0_sys";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
	};

	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
		compatible = "regulator-fixed";
		regulator-name = "vcc_1v1_nldo_s3";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <1100000>;
		regulator-max-microvolt = <1100000>;
		vin-supply = <&vcc_5v0_sys>;
	};

	vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
		compatible = "regulator-fixed";
		regulator-name = "vcc_2v0_pldo_s3";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <2000000>;
		regulator-max-microvolt = <2000000>;
		vin-supply = <&vcc_5v0_sys>;
	};

	vcc_3v3_minipcie: regulator-vcc-3v3-minipcie {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&minipcie_pwren>;
		regulator-boot-on;
		regulator-max-microvolt = <3300000>;
		regulator-min-microvolt = <3300000>;
		regulator-name = "vcc_3v3_minipcie";
		startup-delay-us = <5000>;
		vin-supply = <&vcc_5v0_sys>;
	};

	vcc_3v3_wl: regulator-3v3-wl {
		compatible = "regulator-fixed";
		gpio = <&gpio0 RK_PD1 GPIO_ACTIVE_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&wifi_pwren_l>;
		regulator-boot-on;
		regulator-max-microvolt = <3300000>;
		regulator-min-microvolt = <3300000>;
		regulator-name = "vcc_3v3_wl";
		vin-supply = <&vcc_3v3_s0>;
	};

	vcc_3v3_s0: regulator-vcc-3v3-s0 {
		compatible = "regulator-fixed";
		regulator-name = "vcc_3v3_s0";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vcc_3v3_s3>;
	};

	sdio_pwrseq: sdio-pwrseq {
		compatible = "mmc-pwrseq-simple";
		clock-names = "ext_clock";
		clocks = <&hym8563>;
		pinctrl-names = "default";
		pinctrl-0 = <&wifi_reg_on_h>;
		post-power-on-delay-ms = <200>;
		reset-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
	};

	usb_a_3_0: usb-a-connector-0 {
		compatible = "usb-a-connector";
		label = "USB 3.0 Type-A";
		vbus-supply = <&vcc_5v0_usb3_host>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;

				usb_a_3_0_hs: endpoint {
					remote-endpoint = <&usb_hub_port1>;
				};
			};

			port@1 {
				reg = <1>;

				usb_a_3_0_ss: endpoint {
					remote-endpoint = <&usb_drd1_ss>;
				};
			};
		};
	};

	usb_a_2_0_1: usb-a-connector-1 {
		compatible = "usb-a-connector";
		label = "USB 2.0 Type-A 1";
		vbus-supply = <&vcc_5v0_usb3_host>;

		port {
			usb_a_2_0_1_hs: endpoint {
				remote-endpoint = <&usb_hub_port2>;
			};
		};
	};

	usb_a_2_0_2: usb-a-connector-2 {
		compatible = "usb-a-connector";
		label = "USB 2.0 Type-A 2";
		vbus-supply = <&vcc_5v0_usb2_host>;

		port {
			usb_a_2_0_2_hs: endpoint {
				remote-endpoint = <&usb_hub_port3>;
			};
		};
	};

	usb_a_2_0_3: usb-a-connector-3 {
		compatible = "usb-a-connector";
		label = "USB 2.0 Type-A 3";
		vbus-supply = <&vcc_5v0_usb2_host>;

		port {
			usb_a_2_0_3_hs: endpoint {
				remote-endpoint = <&usb_hub_port4>;
			};
		};
	};
};

&combphy0_ps {
	status = "okay";
};

&combphy1_psu {
	status = "okay";
};

&cpu_b0 {
	cpu-supply = <&vdd_cpu_big_s0>;
};

&cpu_b1 {
	cpu-supply = <&vdd_cpu_big_s0>;
};

&cpu_b2 {
	cpu-supply = <&vdd_cpu_big_s0>;
};

&cpu_b3 {
	cpu-supply = <&vdd_cpu_big_s0>;
};

&cpu_l0 {
	cpu-supply = <&vdd_cpu_lit_s0>;
};

&cpu_l1 {
	cpu-supply = <&vdd_cpu_lit_s0>;
};

&cpu_l2 {
	cpu-supply = <&vdd_cpu_lit_s0>;
};

&cpu_l3 {
	cpu-supply = <&vdd_cpu_lit_s0>;
};

&gmac0 {
	clock_in_out = "input";
	phy-handle = <&rgmii_phy0>;
	/* RX delay is added by the PHY, TX delay by the GMAC. */
	phy-mode = "rgmii-rxid";
	pinctrl-names = "default";
	pinctrl-0 = <&eth0m0_miim
		     &eth0m0_tx_bus2
		     &eth0m0_rx_bus2
		     &eth0m0_rgmii_clk
		     &eth0m0_rgmii_bus
		     &eth0m0_mclk>;
	tx_delay = <0x24>;
	status = "okay";
};

&hdmi {
	/* The external level shifters must be on for TMDS operation. */
	frl-enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&hdmi_in {
	hdmi_in_vp0: endpoint {
		remote-endpoint = <&vp0_out_hdmi>;
	};
};

&hdmi_out {
	hdmi_out_con: endpoint {
		remote-endpoint = <&hdmi_con_in>;
	};
};

&hdmi_sound {
	simple-audio-card,mclk-fs = <128>;
	status = "okay";

	simple-audio-card,cpu {
		dai-tdm-slot-num = <2>;
		dai-tdm-slot-width = <32>;
	};
};

&hdptxphy {
	status = "okay";
};

&i2c1 {
	status = "okay";

	pmic@23 {
		compatible = "rockchip,rk806";
		reg = <0x23>;
		#gpio-cells = <2>;
		gpio-controller;
		interrupt-parent = <&gpio0>;
		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&pmic_pins
			     &rk806_dvs1_null
			     &rk806_dvs2_null
			     &rk806_dvs3_null>;
		system-power-controller;
		vcc1-supply = <&vcc_5v0_sys>;
		vcc2-supply = <&vcc_5v0_sys>;
		vcc3-supply = <&vcc_5v0_sys>;
		vcc4-supply = <&vcc_5v0_sys>;
		vcc5-supply = <&vcc_5v0_sys>;
		vcc6-supply = <&vcc_5v0_sys>;
		vcc7-supply = <&vcc_5v0_sys>;
		vcc8-supply = <&vcc_5v0_sys>;
		vcc9-supply = <&vcc_5v0_sys>;
		vcc10-supply = <&vcc_5v0_sys>;
		vcc11-supply = <&vcc_2v0_pldo_s3>;
		vcc12-supply = <&vcc_5v0_sys>;
		vcc13-supply = <&vcc_1v1_nldo_s3>;
		vcc14-supply = <&vcc_1v1_nldo_s3>;
		vcca-supply = <&vcc_5v0_sys>;

		rk806_dvs1_null: dvs1-null-pins {
			pins = "gpio_pwrctrl1";
			function = "pin_fun0";
		};

		rk806_dvs2_null: dvs2-null-pins {
			pins = "gpio_pwrctrl2";
			function = "pin_fun0";
		};

		rk806_dvs3_null: dvs3-null-pins {
			pins = "gpio_pwrctrl3";
			function = "pin_fun0";
		};

		regulators {
			vdd_cpu_big_s0: dcdc-reg1 {
				regulator-always-on;
				regulator-boot-on;
				regulator-enable-ramp-delay = <400>;
				regulator-min-microvolt = <550000>;
				regulator-max-microvolt = <950000>;
				regulator-name = "vdd_cpu_big_s0";
				regulator-ramp-delay = <12500>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdd_npu_s0: dcdc-reg2 {
				regulator-boot-on;
				regulator-enable-ramp-delay = <400>;
				regulator-min-microvolt = <550000>;
				regulator-max-microvolt = <950000>;
				regulator-name = "vdd_npu_s0";
				regulator-ramp-delay = <12500>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdd_cpu_lit_s0: dcdc-reg3 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <550000>;
				regulator-max-microvolt = <950000>;
				regulator-name = "vdd_cpu_lit_s0";
				regulator-ramp-delay = <12500>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc_3v3_s3: dcdc-reg4 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcc_3v3_s3";

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vdd_gpu_s0: dcdc-reg5 {
				regulator-boot-on;
				regulator-enable-ramp-delay = <400>;
				regulator-min-microvolt = <550000>;
				regulator-max-microvolt = <900000>;
				regulator-name = "vdd_gpu_s0";
				regulator-ramp-delay = <12500>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vddq_ddr_s0: dcdc-reg6 {
				regulator-always-on;
				regulator-boot-on;
				regulator-name = "vddq_ddr_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdd_logic_s0: dcdc-reg7 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <550000>;
				regulator-max-microvolt = <800000>;
				regulator-name = "vdd_logic_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc_1v8_s3: dcdc-reg8 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc_1v8_s3";

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vdd2_ddr_s3: dcdc-reg9 {
				regulator-always-on;
				regulator-boot-on;
				regulator-name = "vdd2_ddr_s3";

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vdd_ddr_s0: dcdc-reg10 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <550000>;
				regulator-max-microvolt = <1200000>;
				regulator-name = "vdd_ddr_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcca_1v8_s0: pldo-reg1 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcca_1v8_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcca1v8_pldo2_s0: pldo-reg2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcca1v8_pldo2_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdda_1v2_s0: pldo-reg3 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <1200000>;
				regulator-name = "vdda_1v2_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcca_3v3_s0: pldo-reg4 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcca_3v3_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vccio_sd_s0: pldo-reg5 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vccio_sd_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcca1v8_pldo6_s3: pldo-reg6 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcca1v8_pldo6_s3";

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vdd_0v75_s3: nldo-reg1 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <750000>;
				regulator-max-microvolt = <750000>;
				regulator-name = "vdd_0v75_s3";

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vdda_ddr_pll_s0: nldo-reg2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <850000>;
				regulator-max-microvolt = <850000>;
				regulator-name = "vdda_ddr_pll_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdda_hdmi_s0: nldo-reg3 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <837500>;
				regulator-max-microvolt = <837500>;
				regulator-name = "vdda_hdmi_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdda_0v85_s0: nldo-reg4 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <850000>;
				regulator-max-microvolt = <850000>;
				regulator-name = "vdda_0v85_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdda_0v75_s0: nldo-reg5 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <750000>;
				regulator-max-microvolt = <750000>;
				regulator-name = "vdda_0v75_s0";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};
		};
	};
};

&i2c2 {
	status = "okay";

	typec@22 {
		compatible = "fcs,fusb302";
		reg = <0x22>;
		interrupt-parent = <&gpio0>;
		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&fusb302_int>;
		vbus-supply = <&vcc_5v0_typec>;

		connector {
			compatible = "usb-c-connector";
			data-role = "host";
			label = "USB-C";
			power-role = "source";
			source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>;

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;

					usb_c_hs: endpoint {
						remote-endpoint = <&usb_drd0_hs>;
					};
				};

				port@1 {
					reg = <1>;

					usb_c_ss: endpoint {
						remote-endpoint = <&usbdp_phy_ep>;
					};
				};
			};
		};
	};

	hym8563: rtc@51 {
		compatible = "haoyu,hym8563";
		reg = <0x51>;
		#clock-cells = <0>;
		clock-output-names = "hym8563";
		interrupt-parent = <&gpio0>;
		interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&rtc_int_l>;
		wakeup-source;
	};
};

&mdio0 {
	rgmii_phy0: ethernet-phy@1 {
		compatible = "ethernet-phy-id7b74.4412";
		reg = <0x1>;
		pinctrl-names = "default";
		pinctrl-0 = <&gmac0_phy_reset>;
		reset-assert-us = <20000>;
		reset-deassert-us = <100000>;
		reset-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
	};
};

&pinctrl {
	ethernet {
		gmac0_phy_reset: gmac0-phy-reset {
			rockchip,pins = <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	minipcie {
		minipcie_pwren: minipcie-pwren {
			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	rtc {
		rtc_int_l: rtc-int-l {
			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	wireless-bluetooth {
		bt_host_wake_h: bt-host-wake-h {
			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
		};

		bt_reg_on_h: bt-reg-on-h {
			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		bt_wake_h: bt-wake-h {
			rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	wireless-wlan {
		wifi_host_wake_h: wifi-host-wake-h {
			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
		};

		wifi_pwren_l: wifi-pwren-l {
			rockchip,pins = <0 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
		};

		wifi_reg_on_h: wifi-reg-on-h {
			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	sdmmc {
		sdmmc0_det_l: sdmmc0-det-l {
			rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	usb-host {
		usb2_host_pwren: usb2-host-pwren {
			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		usb3_host_pwren: usb3-host-pwren {
			rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	usb-typec {
		fusb302_int: fusb302-int {
			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
		};

		typec_vbus_en: typec-vbus-en {
			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};
};

&sai6 {
	rockchip,sai-tx-route = <0>;
	status = "okay";
};

&saradc {
	vref-supply = <&vcca1v8_pldo2_s0>;
	status = "okay";
};

&sata0 {
	target-supply = <&vcc_3v3_minipcie>;
	status = "okay";
};

&sdio {
	bus-width = <4>;
	cap-sd-highspeed;
	cap-sdio-irq;
	keep-power-in-suspend;
	max-frequency = <100000000>;
	mmc-pwrseq = <&sdio_pwrseq>;
	no-mmc;
	no-sd;
	non-removable;
	sd-uhs-sdr104;
	vmmc-supply = <&vcc_3v3_wl>;
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	wifi@1 {
		compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
		reg = <1>;
		interrupt-parent = <&gpio0>;
		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "host-wake";
		pinctrl-names = "default";
		pinctrl-0 = <&wifi_host_wake_h>;
	};
};

&sdmmc {
	bus-width = <4>;
	cap-sd-highspeed;
	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
	disable-wp;
	max-frequency = <50000000>;
	no-mmc;
	no-sdio;
	pinctrl-names = "default";
	/* GPIO0_B6/SDMMC0_PWREN is not connected on this board. */
	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_det_l &sdmmc0_bus4>;
	vmmc-supply = <&vcc_3v3_s0>;
	vqmmc-supply = <&vccio_sd_s0>;
	status = "okay";
};

&sdhci {
	bus-width = <8>;
	full-pwr-cycle-in-suspend;
	mmc-hs400-1_8v;
	mmc-hs400-enhanced-strobe;
	no-sd;
	no-sdio;
	non-removable;
	vmmc-supply = <&vcc_3v3_s3>;
	vqmmc-supply = <&vcc_1v8_s3>;
	status = "okay";
};

&tsadc {
	status = "okay";
};

&uart0 {
	status = "okay";
};

&uart6 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
	uart-has-rtscts;
	status = "okay";

	bluetooth {
		compatible = "brcm,bcm4345c5";
		clocks = <&hym8563>;
		clock-names = "lpo";
		device-wakeup-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
		interrupt-parent = <&gpio0>;
		interrupts = <RK_PB1 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "host-wakeup";
		max-speed = <1500000>;
		pinctrl-names = "default";
		pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_h>;
		shutdown-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>;
		vbat-supply = <&vcc_3v3_wl>;
	};
};

&u2phy0 {
	status = "okay";
};

&u2phy0_otg {
	status = "okay";
};

&u2phy1 {
	status = "okay";
};

&u2phy1_otg {
	status = "okay";
};

&usbdp_phy {
	mode-switch;
	orientation-switch;
	status = "okay";

	port {
		usbdp_phy_ep: endpoint {
			remote-endpoint = <&usb_c_ss>;
		};
	};
};

&usb_drd0_dwc3 {
	usb-role-switch;
	status = "okay";

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@0 {
			reg = <0>;

			usb_drd0_hs: endpoint {
				remote-endpoint = <&usb_c_hs>;
			};
		};
	};
};

&usb_drd1_dwc3 {
	#address-cells = <1>;
	#size-cells = <0>;

	dr_mode = "host";
	status = "okay";

	usb_hub: hub@1 {
		compatible = "usb1a40,0201";
		reg = <1>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@1 {
				reg = <1>;

				usb_hub_port1: endpoint {
					remote-endpoint = <&usb_a_3_0_hs>;
				};
			};

			port@2 {
				reg = <2>;

				usb_hub_port2: endpoint {
					remote-endpoint = <&usb_a_2_0_1_hs>;
				};
			};

			port@3 {
				reg = <3>;

				usb_hub_port3: endpoint {
					remote-endpoint = <&usb_a_2_0_2_hs>;
				};
			};

			port@4 {
				reg = <4>;

				usb_hub_port4: endpoint {
					remote-endpoint = <&usb_a_2_0_3_hs>;
				};
			};
		};
	};

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@1 {
			reg = <1>;

			usb_drd1_ss: endpoint {
				remote-endpoint = <&usb_a_3_0_ss>;
			};
		};
	};
};

&vop {
	status = "okay";
};

&vop_mmu {
	status = "okay";
};

&vp0 {
	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
		remote-endpoint = <&hdmi_in_vp0>;
	};
};