xref: /linux/scripts/dtc/include-prefixes/arm64/rockchip/rk3568-lincstation-e1.dts (revision 67f8bc848ee31831336bd478e57d2f993551902e)

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>

#include "rk3568.dtsi"

/ {
	model = "LincPlus LincStation E1";
	compatible = "techvision,tvd8322r", "rockchip,rk3568";

	aliases {
		mmc0 = &sdhci;
		mmc1 = &sdmmc1;
		rtc0 = &hym8563;
	};

	chosen {
		stdout-path = "serial2:1500000n8";
	};

	/* This device is only available when reset-button-mux is driven high */
	adc-keys {
		compatible = "adc-keys";
		io-channels = <&saradc 5>;
		io-channel-names = "buttons";
		keyup-threshold-microvolt = <1800000>;
		poll-interval = <100>;
		status = "disabled";

		button-reset {
			label = "reset";
			linux,code = <KEY_RESTART>;
			press-threshold-microvolt = <0>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&gpio_leds &sata1_detect &sata2_detect>;

		led-2 {
			color = <LED_COLOR_ID_WHITE>;
			function = LED_FUNCTION_LAN;
			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "netdev";
		};

		led-3 {
			color = <LED_COLOR_ID_AMBER>;
			function = LED_FUNCTION_LAN;
			gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "netdev";
		};

		led-4 {
			color = <LED_COLOR_ID_WHITE>;
			function = "m1";
			gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
		};

		led-5 {
			color = <LED_COLOR_ID_AMBER>;
			function = "m1";
			gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_HIGH>;
		};

		led-6 {
			color = <LED_COLOR_ID_WHITE>;
			function = "m2";
			gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
		};

		led-7 {
			color = <LED_COLOR_ID_AMBER>;
			function = "m2";
			gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
		};

		led-8 {
			color = <LED_COLOR_ID_WHITE>;
			function = "s1";
			gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "disk-activity";
		};

		led-9 {
			color = <LED_COLOR_ID_AMBER>;
			function = "s1";
			gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "gpio";
			trigger-sources = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
		};

		led-a {
			color = <LED_COLOR_ID_WHITE>;
			function = "s2";
			gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "disk-activity";
		};

		led-b {
			color = <LED_COLOR_ID_AMBER>;
			function = "s2";
			gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "gpio";
			trigger-sources = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
		};
	};

	hdmi-con {
		compatible = "hdmi-connector";
		type = "a";

		port {
			hdmi_con_in: endpoint {
				remote-endpoint = <&hdmi_out_con>;
			};
		};
	};

	fan: pwm-fan {
		compatible = "pwm-fan";
		interrupt-parent = <&gpio0>;
		interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
		#cooling-cells = <2>;
		cooling-levels = <0 20 50 90 130 170 210 225 240 255>;
		fan-supply = <&vcc12v0_sys>;
		fan-stop-to-start-percent = <8>;
		pinctrl-names = "default";
		pinctrl-0 = <&fan_tach>;
		pulses-per-revolution = <2>;
		pwms = <&pwm0 0 50000 0>;
	};

	pwm-leds {
		compatible = "pwm-leds";

		led-0 {
			color = <LED_COLOR_ID_AMBER>;
			default-state = "off";
			function = LED_FUNCTION_STANDBY;
			max-brightness = <255>;
			pwms = <&pwm4 0 25000 0>;
		};

		led-1 {
			color = <LED_COLOR_ID_WHITE>;
			default-brightness = <127>;
			default-state = "on";
			function = LED_FUNCTION_POWER;
			max-brightness = <255>;
			pwms = <&pwm5 0 25000 0>;
		};
	};

	dc_12v: regulator-dc-12v {
		compatible = "regulator-fixed";
		regulator-name = "dc_12v";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
	};

	vcc12v0_sys: regulator-vcc12v0-sys {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&vcc12v0_sys_en>;
		regulator-name = "vcc12v0_sys";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
		vin-supply = <&dc_12v>;
	};

	vcc3v3_lan: regulator-vcc3v3-lan {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&vcc3v3_lan_en>;
		regulator-name = "vcc3v3_lan";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vcc5v0_sys>;
	};

	vcc3v3_pcie: regulator-vcc3v3-pcie {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&vcc3v3_pcie_en>;
		off-on-delay-us = <500000>;
		regulator-name = "vcc3v3_pcie";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		startup-delay-us = <5000>;
		vin-supply = <&dc_12v>;
	};

	vcc3v3_sys: regulator-vcc3v3-sys {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_sys";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&dc_12v>;
	};

	vcc5v0_sata: regulator-vcc5v0-sata {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&vcc5v0_sata_en>;
		regulator-name = "vcc5v0_sata";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&dc_12v>;
	};

	vcc5v0_sys: regulator-vcc5v0-sys {
		compatible = "regulator-fixed";
		regulator-name = "vcc5v0_sys";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&dc_12v>;
	};

	vcc5v0_usb: regulator-vcc5v0-usb {
		compatible = "regulator-fixed";
		regulator-name = "vcc5v0_usb";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&dc_12v>;
	};

	vcc5v0_usb_host: regulator-vcc5v0-usb-host {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&vcc5v0_usb_host_en>;
		regulator-name = "vcc5v0_usb_host";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&vcc5v0_usb>;
	};

	vcc5v0_usb_otg: regulator-vcc5v0-usb-otg {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&vcc5v0_usb_otg_en>;
		regulator-name = "vcc5v0_usb_otg";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&vcc5v0_usb>;
	};

	vcc_wl: regulator-vcc-wl {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&vcc_wl_en>;
		regulator-name = "vcc_wl";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vcc5v0_sys>;
	};

	vccio_wl: regulator-vccio-wl {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&vccio_wl_en>;
		regulator-name = "vccio_wl";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		vin-supply = <&vcc5v0_sys>;
	};

	sdio_pwrseq: sdio-pwrseq {
		compatible = "mmc-pwrseq-simple";
		clocks = <&rk809 1>;
		clock-names = "ext_clock";
		pinctrl-names = "default";
		pinctrl-0 = <&wifi_enable_h>;
		post-power-on-delay-ms = <200>;
		reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
	};
};

&combphy0 {
	status = "okay";
};

&combphy1 {
	status = "okay";
};

&combphy2 {
	status = "okay";
};

&cpu0 {
	cpu-supply = <&vdd_cpu>;
};

&cpu1 {
	cpu-supply = <&vdd_cpu>;
};

&cpu2 {
	cpu-supply = <&vdd_cpu>;
};

&cpu3 {
	cpu-supply = <&vdd_cpu>;
};

/*
 * The fan pulls hot air from the CPU and m.2 slot heat sinks and blows it
 * across the hard disks. To keep the disks from overheating (below 50 °C),
 * their ambient air, and thus the CPU heat sink, must be kept quite cool.
 */
&cpu_thermal {
	trips {
		sys_fan1: sys-fan1 {
			hysteresis = <2000>;
			temperature = <25000>;
			type = "active";
		};

		sys_fan2: sys-fan2 {
			hysteresis = <2000>;
			temperature = <35000>;
			type = "active";
		};

		sys_fan3: sys-fan3 {
			hysteresis = <2000>;
			temperature = <45000>;
			type = "active";
		};
	};

	cooling-maps {
		map1 {
			cooling-device = <&fan 1 3>;
			trip = <&sys_fan1>;
		};

		map2 {
			cooling-device = <&fan 4 5>;
			trip = <&sys_fan2>;
		};

		map3 {
			cooling-device = <&fan 6 THERMAL_NO_LIMIT>;
			trip = <&sys_fan3>;
		};
	};
};

&gpio1 {
	/* ata1.01 is the slot labeled HDD2 */
	sata1-power-control-hog {
		gpio-hog;
		gpios = <RK_PD7 GPIO_ACTIVE_LOW>;
		line-name = "sata1-power-control";
		output-high;
	};
};

&gpio2 {
	/* ata1.02 is the slot labeled HDD1 */
	sata2-power-control-hog {
		gpio-hog;
		gpios = <RK_PA0 GPIO_ACTIVE_LOW>;
		line-name = "sata2-power-control";
		output-high;
	};
};

&gpio4 {
	/* low = SoC reset, high = saradc input */
	reset-button-mux-hog {
		gpio-hog;
		gpios = <RK_PB7 GPIO_ACTIVE_HIGH>;
		line-name = "reset-button-mux";
		output-low;
	};

	sata-pm-reset-hog {
		gpio-hog;
		gpios = <RK_PD2 GPIO_ACTIVE_LOW>;
		line-name = "sata-pm-reset";
		output-low;
	};
};

&gpu {
	mali-supply = <&vdd_gpu>;
	status = "okay";
};

&hdmi {
	avdd-0v9-supply = <&vdda0v9_image>;
	avdd-1v8-supply = <&vcca1v8_image>;
	status = "okay";
};

&hdmi_in {
	hdmi_in_vp0: endpoint {
		remote-endpoint = <&vp0_out_hdmi>;
	};
};

&hdmi_out {
	hdmi_out_con: endpoint {
		remote-endpoint = <&hdmi_con_in>;
	};
};

&hdmi_sound {
	status = "okay";
};

&i2c0 {
	status = "okay";

	vdd_cpu: regulator@40 {
		compatible = "silergy,syr827";
		reg = <0x40>;
		fcs,suspend-voltage-selector = <1>;
		regulator-name = "vdd_cpu";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <712500>;
		regulator-max-microvolt = <1500000>;
		regulator-ramp-delay = <1000>;
		vin-supply = <&vcc5v0_sys>;

		regulator-state-mem {
			regulator-off-in-suspend;
		};
	};

	rk809: pmic@20 {
		compatible = "rockchip,rk809";
		reg = <0x20>;
		interrupt-parent = <&gpio0>;
		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
		#clock-cells = <1>;
		pinctrl-names = "default";
		pinctrl-0 = <&pmic_int>;
		system-power-controller;
		vcc1-supply = <&vcc3v3_sys>;
		vcc2-supply = <&vcc3v3_sys>;
		vcc3-supply = <&vcc3v3_sys>;
		vcc4-supply = <&vcc3v3_sys>;
		vcc5-supply = <&vcc3v3_sys>;
		vcc6-supply = <&vcc5v0_sys>;
		vcc7-supply = <&vcc3v3_sys>;
		vcc8-supply = <&vcc3v3_sys>;
		vcc9-supply = <&vcc3v3_sys>;
		wakeup-source;

		regulators {
			vdd_logic: DCDC_REG1 {
				regulator-name = "vdd_logic";
				regulator-always-on;
				regulator-boot-on;
				regulator-initial-mode = <0x2>;
				regulator-min-microvolt = <500000>;
				regulator-max-microvolt = <1350000>;
				regulator-ramp-delay = <6001>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdd_gpu: DCDC_REG2 {
				regulator-name = "vdd_gpu";
				regulator-always-on;
				regulator-boot-on;
				regulator-initial-mode = <0x2>;
				regulator-min-microvolt = <500000>;
				regulator-max-microvolt = <1350000>;
				regulator-ramp-delay = <6001>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc_ddr: DCDC_REG3 {
				regulator-name = "vcc_ddr";
				regulator-always-on;
				regulator-boot-on;
				regulator-initial-mode = <0x2>;

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vdd_npu: DCDC_REG4 {
				regulator-name = "vdd_npu";
				regulator-initial-mode = <0x2>;
				regulator-min-microvolt = <500000>;
				regulator-max-microvolt = <1350000>;
				regulator-ramp-delay = <6001>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc_1v8: DCDC_REG5 {
				regulator-name = "vcc_1v8";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vdda0v9_image: LDO_REG1 {
				regulator-name = "vdda0v9_image";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <900000>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdda_0v9: LDO_REG2 {
				regulator-name = "vdda_0v9";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <900000>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdda0v9_pmu: LDO_REG3 {
				regulator-name = "vdda0v9_pmu";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <900000>;

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vccio_acodec: LDO_REG4 {
				regulator-name = "vccio_acodec";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vccio_sd: LDO_REG5 {
				regulator-name = "vccio_sd";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc3v3_pmu: LDO_REG6 {
				regulator-name = "vcc3v3_pmu";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vcca_1v8: LDO_REG7 {
				regulator-name = "vcca_1v8";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcca1v8_pmu: LDO_REG8 {
				regulator-name = "vcca1v8_pmu";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vcca1v8_image: LDO_REG9 {
				regulator-name = "vcca1v8_image";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc_3v3: SWITCH_REG1 {
				regulator-name = "vcc_3v3";
				regulator-always-on;
				regulator-boot-on;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc3v3_sd: SWITCH_REG2 {
				regulator-name = "vcc3v3_sd";
				regulator-always-on;
				regulator-boot-on;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};
		};
	};
};

&i2c1 {
	status = "okay";

	hym8563: rtc@51 {
		compatible = "haoyu,hym8563";
		reg = <0x51>;
		interrupt-parent = <&gpio0>;
		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
		#clock-cells = <0>;
		clock-output-names = "rtcic_32kout";
		pinctrl-names = "default";
		pinctrl-0 = <&hym8563_int>;
		wakeup-source;
	};
};

&i2s0_8ch {
	status = "okay";
};

&pcie2x1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pcie2x1_rst>;
	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
	vpcie3v3-supply = <&vcc3v3_lan>;
	status = "okay";
};

&pcie30phy {
	data-lanes = <1 2>;
	status = "okay";
};

&pcie3x1 {
	reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
	vpcie3v3-supply = <&vcc3v3_pcie>;
	status = "okay";
};

&pcie3x2 {
	num-lanes = <1>;
	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
	vpcie3v3-supply = <&vcc3v3_pcie>;
	status = "okay";
};

&pinctrl {
	bluetooth {
		bt_device_wake_h: bt-device-wake-h {
			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		bt_enable_h: bt-enable-h {
			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		bt_host_wake_h: bt-host-wake-h {
			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
		};
	};

	gpio-leds {
		gpio_leds: gpio-leds {
			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>,
					<1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>,
					<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>,
					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>,
					<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
					<1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>,
					<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
					<1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	hym8563 {
		hym8563_int: hym8563-int {
			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	pcie {
		pcie2x1_rst: pcie2x1-rst {
			rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		vcc3v3_lan_en: vcc3v3-lan-en {
			rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		vcc3v3_pcie_en: vcc3v3-pcie-en {
			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	pmic {
		pmic_int: pmic-int {
			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	pwm-fan {
		fan_tach: fan-tach {
			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		vcc12v0_sys_en: vcc12v0-sys-en {
			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	sata {
		sata1_detect: sata1-detect {
			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
		};

		sata2_detect: sata2-detect {
			rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
		};

		vcc5v0_sata_en: vcc5v0-sata-en {
			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	usb {
		vcc5v0_usb_host_en: vcc5v0-usb-host-en {
			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	wlan {
		vcc_wl_en: vcc-wl-en {
			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		vccio_wl_en: vccio-wl-en {
			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		wifi_enable_h: wifi-enable-h {
			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		wifi_host_wake_h: wifi-host-wake-h {
			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
		};
	};
};

&pmu_io_domains {
	pmuio1-supply = <&vcc3v3_pmu>;
	pmuio2-supply = <&vcc3v3_pmu>;
	vccio1-supply = <&vccio_acodec>;
	vccio2-supply = <&vcc_1v8>;
	vccio3-supply = <&vccio_sd>;
	vccio4-supply = <&vcc_1v8>;
	vccio5-supply = <&vcc_3v3>;
	vccio6-supply = <&vcc_1v8>;
	vccio7-supply = <&vcc_3v3>;
	status = "okay";
};

&pwm0 {
	status = "okay";
};

&pwm4 {
	status = "okay";
};

&pwm5 {
	status = "okay";
};

&saradc {
	vref-supply = <&vcca_1v8>;
	status = "disabled";
};

&sata1 {
	target-supply = <&vcc5v0_sata>;
	status = "okay";
};

&sdhci {
	bus-width = <8>;
	max-frequency = <200000000>;
	non-removable;
	pinctrl-names = "default";
	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
	status = "okay";
};

&sdmmc1 {
	#address-cells = <1>;
	#size-cells = <0>;
	bus-width = <4>;
	cap-sd-highspeed;
	cap-sdio-irq;
	disable-wp;
	keep-power-in-suspend;
	max-frequency = <208000000>;
	mmc-pwrseq = <&sdio_pwrseq>;
	no-mmc;
	no-sd;
	non-removable;
	pinctrl-names = "default";
	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
	sd-uhs-sdr104;
	vmmc-supply = <&vcc_wl>;
	vqmmc-supply = <&vccio_wl>;
	status = "okay";

	rtl8822cs: wifi@1 {
		reg = <1>;
		interrupt-parent = <&gpio2>;
		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "host-wake";
		pinctrl-names = "default";
		pinctrl-0 = <&wifi_host_wake_h>;
	};
};

&tsadc {
	rockchip,hw-tshut-mode = <0>;
	rockchip,hw-tshut-polarity = <0>;
	status = "okay";
};

&uart1 {
	dma-names = "tx", "rx";
	pinctrl-names = "default";
	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
	uart-has-rtscts;
	status = "okay";

	bluetooth {
		compatible = "realtek,rtl8822cs-bt";
		device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
		enable-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
		host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&bt_device_wake_h &bt_enable_h &bt_host_wake_h>;
	};
};

&uart2 {
	status = "okay";
};

&usb_host0_ehci {
	status = "okay";
};

&usb_host0_ohci {
	status = "okay";
};

&usb_host0_xhci {
	dr_mode = "host";
	extcon = <&usb2phy0>;
	status = "okay";
};

&usb_host1_ehci {
	status = "okay";
};

&usb_host1_ohci {
	status = "okay";
};

&usb2phy0 {
	status = "okay";
};

&usb2phy0_otg {
	phy-supply = <&vcc5v0_usb_otg>;
	status = "okay";
};

&usb2phy1 {
	status = "okay";
};

&usb2phy1_host {
	phy-supply = <&vcc5v0_usb_host>;
	status = "okay";
};

&usb2phy1_otg {
	phy-supply = <&vcc5v0_usb_host>;
	status = "okay";
};

&vop {
	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
	status = "okay";
};

&vop_mmu {
	status = "okay";
};

&vp0 {
	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
		remote-endpoint = <&hdmi_in_vp0>;
	};
};