xref: /linux/scripts/dtc/include-prefixes/arm64/renesas/ebisu.dtsi (revision 002c6ca75289a4ac4f6738213dd2d258704886e4) 
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree Source for the Ebisu board
4 *
5 * Copyright (C) 2018 Renesas Electronics Corp.
6 */
7
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/input/input.h>
10
11/ {
12	model = "Renesas Ebisu board";
13	compatible = "renesas,ebisu";
14
15	aliases {
16		i2c0 = &i2c0;
17		i2c1 = &i2c1;
18		i2c2 = &i2c2;
19		i2c3 = &i2c3;
20		i2c4 = &i2c4;
21		i2c5 = &i2c5;
22		i2c6 = &i2c6;
23		i2c7 = &i2c7;
24		serial0 = &scif2;
25		ethernet0 = &avb;
26		mmc0 = &sdhi3;
27		mmc1 = &sdhi0;
28		mmc2 = &sdhi1;
29	};
30
31	chosen {
32		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
33		stdout-path = "serial0:115200n8";
34	};
35
36	audio_clkout: audio-clkout {
37		/*
38		 * This is same as <&rcar_sound 0>
39		 * but needed to avoid cs2000/rcar_sound probe dead-lock
40		 */
41		compatible = "fixed-clock";
42		#clock-cells = <0>;
43		clock-frequency = <11289600>;
44	};
45
46	backlight: backlight {
47		compatible = "pwm-backlight";
48		pwms = <&pwm3 0 50000>;
49
50		brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
51		default-brightness-level = <10>;
52
53		power-supply = <&reg_12p0v>;
54	};
55
56	cvbs-in {
57		compatible = "composite-video-connector";
58		label = "CVBS IN";
59
60		port {
61			cvbs_con: endpoint {
62				remote-endpoint = <&adv7482_ain7>;
63			};
64		};
65	};
66
67	hdmi-in {
68		compatible = "hdmi-connector";
69		label = "HDMI IN";
70		type = "a";
71
72		port {
73			hdmi_in_con: endpoint {
74				remote-endpoint = <&adv7482_hdmi>;
75			};
76		};
77	};
78
79	hdmi-out {
80		compatible = "hdmi-connector";
81		type = "a";
82
83		port {
84			hdmi_con_out: endpoint {
85				remote-endpoint = <&adv7511_out>;
86			};
87		};
88	};
89
90	keys {
91		compatible = "gpio-keys";
92
93		pinctrl-0 = <&keys_pins>;
94		pinctrl-names = "default";
95
96		key-1 {
97			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
98			linux,code = <KEY_1>;
99			label = "SW4-1";
100			wakeup-source;
101			debounce-interval = <20>;
102		};
103		key-2 {
104			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
105			linux,code = <KEY_2>;
106			label = "SW4-2";
107			wakeup-source;
108			debounce-interval = <20>;
109		};
110		key-3 {
111			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
112			linux,code = <KEY_3>;
113			label = "SW4-3";
114			wakeup-source;
115			debounce-interval = <20>;
116		};
117		key-4 {
118			gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
119			linux,code = <KEY_4>;
120			label = "SW4-4";
121			wakeup-source;
122			debounce-interval = <20>;
123		};
124	};
125
126	lvds-decoder {
127		compatible = "thine,thc63lvd1024";
128		vcc-supply = <&reg_3p3v>;
129
130		ports {
131			#address-cells = <1>;
132			#size-cells = <0>;
133
134			port@0 {
135				reg = <0>;
136				thc63lvd1024_in: endpoint {
137					remote-endpoint = <&lvds0_out>;
138				};
139			};
140
141			port@2 {
142				reg = <2>;
143				thc63lvd1024_out: endpoint {
144					remote-endpoint = <&adv7511_in>;
145				};
146			};
147		};
148	};
149
150	memory@48000000 {
151		device_type = "memory";
152		/* first 128MB is reserved for secure area. */
153		reg = <0x0 0x48000000 0x0 0x38000000>;
154	};
155
156	reg_1p8v: regulator-1p8v {
157		compatible = "regulator-fixed";
158		regulator-name = "fixed-1.8V";
159		regulator-min-microvolt = <1800000>;
160		regulator-max-microvolt = <1800000>;
161		regulator-boot-on;
162		regulator-always-on;
163	};
164
165	reg_3p3v: regulator-3p3v {
166		compatible = "regulator-fixed";
167		regulator-name = "fixed-3.3V";
168		regulator-min-microvolt = <3300000>;
169		regulator-max-microvolt = <3300000>;
170		regulator-boot-on;
171		regulator-always-on;
172	};
173
174	reg_12p0v: regulator-12p0v {
175		compatible = "regulator-fixed";
176		regulator-name = "D12.0V";
177		regulator-min-microvolt = <12000000>;
178		regulator-max-microvolt = <12000000>;
179		regulator-boot-on;
180		regulator-always-on;
181	};
182
183	rsnd_ak4613: sound {
184		compatible = "simple-audio-card";
185
186		simple-audio-card,name = "rsnd-ak4613";
187		simple-audio-card,format = "left_j";
188		simple-audio-card,bitclock-master = <&sndcpu>;
189		simple-audio-card,frame-master = <&sndcpu>;
190
191		sndcodec: simple-audio-card,codec {
192			sound-dai = <&ak4613>;
193		};
194
195		sndcpu: simple-audio-card,cpu {
196			sound-dai = <&rcar_sound>;
197		};
198	};
199
200	vbus0_usb2: regulator-vbus0-usb2 {
201		compatible = "regulator-fixed";
202
203		regulator-name = "USB20_VBUS_CN";
204		regulator-min-microvolt = <5000000>;
205		regulator-max-microvolt = <5000000>;
206
207		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
208		enable-active-high;
209	};
210
211	vcc_sdhi0: regulator-vcc-sdhi0 {
212		compatible = "regulator-fixed";
213
214		regulator-name = "SDHI0 Vcc";
215		regulator-min-microvolt = <3300000>;
216		regulator-max-microvolt = <3300000>;
217
218		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
219		enable-active-high;
220	};
221
222	vccq_sdhi0: regulator-vccq-sdhi0 {
223		compatible = "regulator-gpio";
224
225		regulator-name = "SDHI0 VccQ";
226		regulator-min-microvolt = <1800000>;
227		regulator-max-microvolt = <3300000>;
228
229		gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
230		gpios-states = <1>;
231		states = <3300000 1>, <1800000 0>;
232	};
233
234	vcc_sdhi1: regulator-vcc-sdhi1 {
235		compatible = "regulator-fixed";
236
237		regulator-name = "SDHI1 Vcc";
238		regulator-min-microvolt = <3300000>;
239		regulator-max-microvolt = <3300000>;
240
241		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
242		enable-active-high;
243	};
244
245	vccq_sdhi1: regulator-vccq-sdhi1 {
246		compatible = "regulator-gpio";
247
248		regulator-name = "SDHI1 VccQ";
249		regulator-min-microvolt = <1800000>;
250		regulator-max-microvolt = <3300000>;
251
252		gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
253		gpios-states = <1>;
254		states = <3300000 1>, <1800000 0>;
255	};
256
257	vga {
258		compatible = "vga-connector";
259
260		port {
261			vga_in: endpoint {
262				remote-endpoint = <&adv7123_out>;
263			};
264		};
265	};
266
267	vga-encoder {
268		compatible = "adi,adv7123";
269
270		ports {
271			#address-cells = <1>;
272			#size-cells = <0>;
273
274			port@0 {
275				reg = <0>;
276				adv7123_in: endpoint {
277					remote-endpoint = <&du_out_rgb>;
278				};
279			};
280			port@1 {
281				reg = <1>;
282				adv7123_out: endpoint {
283					remote-endpoint = <&vga_in>;
284				};
285			};
286		};
287	};
288
289	x12_clk: x12 {
290		compatible = "fixed-clock";
291		#clock-cells = <0>;
292		clock-frequency = <24576000>;
293	};
294
295	x13_clk: x13 {
296		compatible = "fixed-clock";
297		#clock-cells = <0>;
298		clock-frequency = <74250000>;
299	};
300};
301
302&audio_clk_a {
303	clock-frequency = <22579200>;
304};
305
306&avb {
307	pinctrl-0 = <&avb_pins>;
308	pinctrl-names = "default";
309	phy-handle = <&phy0>;
310	status = "okay";
311
312	phy0: ethernet-phy@0 {
313		compatible = "ethernet-phy-id0022.1622",
314			     "ethernet-phy-ieee802.3-c22";
315		rxc-skew-ps = <1500>;
316		reg = <0>;
317		interrupt-parent = <&gpio2>;
318		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
319		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
320		/*
321		 * TX clock internal delay mode is required for reliable
322		 * 1Gbps communication using the KSZ9031RNX phy present on
323		 * the Ebisu board, however, TX clock internal delay mode
324		 * isn't supported on R-Car E3(e).  Thus, limit speed to
325		 * 100Mbps for reliable communication.
326		 */
327		max-speed = <100>;
328	};
329};
330
331&canfd {
332	pinctrl-0 = <&canfd0_pins>;
333	pinctrl-names = "default";
334	status = "okay";
335
336	channel0 {
337		status = "okay";
338	};
339};
340
341&csi40 {
342	status = "okay";
343
344	ports {
345		port@0 {
346			csi40_in: endpoint {
347				clock-lanes = <0>;
348				data-lanes = <1 2>;
349				remote-endpoint = <&adv7482_txa>;
350			};
351		};
352	};
353};
354
355&du {
356	pinctrl-0 = <&du_pins>;
357	pinctrl-names = "default";
358	status = "okay";
359
360	clocks = <&cpg CPG_MOD 724>,
361		 <&cpg CPG_MOD 723>,
362		 <&x13_clk>;
363	clock-names = "du.0", "du.1", "dclkin.0";
364
365	ports {
366		port@0 {
367			du_out_rgb: endpoint {
368				remote-endpoint = <&adv7123_in>;
369			};
370		};
371	};
372};
373
374&ehci0 {
375	dr_mode = "otg";
376	status = "okay";
377};
378
379&extal_clk {
380	clock-frequency = <48000000>;
381};
382
383&hsusb {
384	dr_mode = "otg";
385	status = "okay";
386};
387
388&i2c0 {
389	status = "okay";
390
391	io_expander: gpio@20 {
392		compatible = "onnn,pca9654";
393		reg = <0x20>;
394		gpio-controller;
395		#gpio-cells = <2>;
396		interrupt-parent = <&gpio2>;
397		interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
398	};
399
400	hdmi-encoder@39 {
401		compatible = "adi,adv7511w";
402		reg = <0x39>;
403		interrupt-parent = <&gpio1>;
404		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
405
406		adi,input-depth = <8>;
407		adi,input-colorspace = "rgb";
408		adi,input-clock = "1x";
409
410		ports {
411			#address-cells = <1>;
412			#size-cells = <0>;
413
414			port@0 {
415				reg = <0>;
416				adv7511_in: endpoint {
417					remote-endpoint = <&thc63lvd1024_out>;
418				};
419			};
420
421			port@1 {
422				reg = <1>;
423				adv7511_out: endpoint {
424					remote-endpoint = <&hdmi_con_out>;
425				};
426			};
427		};
428	};
429
430	video-receiver@70 {
431		compatible = "adi,adv7482";
432		reg = <0x70>;
433
434		interrupt-parent = <&gpio0>;
435		interrupt-names = "intrq1", "intrq2";
436		interrupts = <7 IRQ_TYPE_LEVEL_LOW>,
437			     <17 IRQ_TYPE_LEVEL_LOW>;
438
439		ports {
440			#address-cells = <1>;
441			#size-cells = <0>;
442
443			port@7 {
444				reg = <7>;
445
446				adv7482_ain7: endpoint {
447					remote-endpoint = <&cvbs_con>;
448				};
449			};
450
451			port@8 {
452				reg = <8>;
453
454				adv7482_hdmi: endpoint {
455					remote-endpoint = <&hdmi_in_con>;
456				};
457			};
458
459			port@a {
460				reg = <10>;
461
462				adv7482_txa: endpoint {
463					clock-lanes = <0>;
464					data-lanes = <1 2>;
465					remote-endpoint = <&csi40_in>;
466				};
467			};
468		};
469	};
470};
471
472&i2c3 {
473	status = "okay";
474
475	ak4613: codec@10 {
476		compatible = "asahi-kasei,ak4613";
477		#sound-dai-cells = <0>;
478		reg = <0x10>;
479		clocks = <&rcar_sound 3>;
480
481		asahi-kasei,in1-single-end;
482		asahi-kasei,in2-single-end;
483		asahi-kasei,out1-single-end;
484		asahi-kasei,out2-single-end;
485		asahi-kasei,out3-single-end;
486		asahi-kasei,out4-single-end;
487		asahi-kasei,out5-single-end;
488		asahi-kasei,out6-single-end;
489	};
490
491	cs2000: clk-multiplier@4f {
492		#clock-cells = <0>;
493		compatible = "cirrus,cs2000-cp";
494		reg = <0x4f>;
495		clocks = <&audio_clkout>, <&x12_clk>;
496		clock-names = "clk_in", "ref_clk";
497
498		assigned-clocks = <&cs2000>;
499		assigned-clock-rates = <24576000>; /* 1/1 divide */
500	};
501};
502
503&i2c_dvfs {
504	status = "okay";
505
506	clock-frequency = <400000>;
507
508	pmic: pmic@30 {
509		pinctrl-0 = <&irq0_pins>;
510		pinctrl-names = "default";
511
512		compatible = "rohm,bd9571mwv";
513		reg = <0x30>;
514		interrupt-parent = <&intc_ex>;
515		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
516		interrupt-controller;
517		#interrupt-cells = <2>;
518		gpio-controller;
519		#gpio-cells = <2>;
520		rohm,ddr-backup-power = <0x1>;
521		rohm,rstbmode-level;
522	};
523
524	eeprom@50 {
525		compatible = "rohm,br24t01", "atmel,24c01";
526		reg = <0x50>;
527		pagesize = <8>;
528	};
529};
530
531&lvds0 {
532	status = "okay";
533
534	clocks = <&cpg CPG_MOD 727>,
535		 <&x13_clk>,
536		 <&extal_clk>;
537	clock-names = "fck", "dclkin.0", "extal";
538
539	ports {
540		port@1 {
541			lvds0_out: endpoint {
542				remote-endpoint = <&thc63lvd1024_in>;
543			};
544		};
545	};
546};
547
548&lvds1 {
549	/*
550	 * Even though the LVDS1 output is not connected, the encoder must be
551	 * enabled to supply a pixel clock to the DU for the DPAD output when
552	 * LVDS0 is in use.
553	 */
554	status = "okay";
555
556	clocks = <&cpg CPG_MOD 727>,
557		 <&x13_clk>,
558		 <&extal_clk>;
559	clock-names = "fck", "dclkin.0", "extal";
560};
561
562&ohci0 {
563	dr_mode = "otg";
564	status = "okay";
565};
566
567&pcie_bus_clk {
568	clock-frequency = <100000000>;
569};
570
571&pciec0 {
572	status = "okay";
573};
574
575&pfc {
576	avb_pins: avb {
577		groups = "avb_link", "avb_mii";
578		function = "avb";
579	};
580
581	canfd0_pins: canfd0 {
582		groups = "canfd0_data";
583		function = "canfd0";
584	};
585
586	du_pins: du {
587		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
588		function = "du";
589	};
590
591	irq0_pins: irq0 {
592		groups = "intc_ex_irq0";
593		function = "intc_ex";
594	};
595
596	keys_pins: keys {
597		pins = "GP_5_10", "GP_5_11", "GP_5_12", "GP_5_13";
598		bias-pull-up;
599	};
600
601	pwm3_pins: pwm3 {
602		groups = "pwm3_b";
603		function = "pwm3";
604	};
605
606	pwm5_pins: pwm5 {
607		groups = "pwm5_a";
608		function = "pwm5";
609	};
610
611	rpc_pins: rpc {
612		groups = "rpc_clk2", "rpc_ctrl", "rpc_data", "rpc_reset",
613			 "rpc_int";
614		function = "rpc";
615	};
616
617	scif2_pins: scif2 {
618		groups = "scif2_data_a";
619		function = "scif2";
620	};
621
622	sdhi0_pins: sd0 {
623		groups = "sdhi0_data4", "sdhi0_ctrl";
624		function = "sdhi0";
625		power-source = <3300>;
626	};
627
628	sdhi0_pins_uhs: sd0_uhs {
629		groups = "sdhi0_data4", "sdhi0_ctrl";
630		function = "sdhi0";
631		power-source = <1800>;
632	};
633
634	sdhi1_pins: sd1 {
635		groups = "sdhi1_data4", "sdhi1_ctrl";
636		function = "sdhi1";
637		power-source = <3300>;
638	};
639
640	sdhi1_pins_uhs: sd1_uhs {
641		groups = "sdhi1_data4", "sdhi1_ctrl";
642		function = "sdhi1";
643		power-source = <1800>;
644	};
645
646	sdhi3_pins: sd3 {
647		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
648		function = "sdhi3";
649		power-source = <1800>;
650	};
651
652	sound_clk_pins: sound_clk {
653		groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a",
654			 "audio_clkout_a", "audio_clkout1_a";
655		function = "audio_clk";
656	};
657
658	sound_pins: sound {
659		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
660		function = "ssi";
661	};
662
663	usb0_pins: usb {
664		groups = "usb0_b", "usb0_id";
665		function = "usb0";
666	};
667
668	usb30_pins: usb30 {
669		groups = "usb30";
670		function = "usb30";
671	};
672};
673
674&pwm3 {
675	pinctrl-0 = <&pwm3_pins>;
676	pinctrl-names = "default";
677
678	status = "okay";
679};
680
681&pwm5 {
682	pinctrl-0 = <&pwm5_pins>;
683	pinctrl-names = "default";
684
685	status = "okay";
686};
687
688&rcar_sound {
689	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
690	pinctrl-names = "default";
691
692	/* Single DAI */
693	#sound-dai-cells = <0>;
694
695	/* audio_clkout0/1/2/3 */
696	#clock-cells = <1>;
697	clock-frequency = <12288000 11289600>;
698
699	status = "okay";
700
701	/* update <audio_clk_b> to <cs2000> */
702	clocks = <&cpg CPG_MOD 1005>,
703		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
704		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
705		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
706		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
707		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
708		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
709		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
710		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
711		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
712		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
713		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
714		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
715		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
716		 <&audio_clk_a>, <&cs2000>, <&audio_clk_c>,
717		 <&cpg CPG_CORE R8A77990_CLK_ZA2>;
718
719	rcar_sound,dai {
720		dai0 {
721			playback = <&ssi0>, <&src0>, <&dvc0>;
722			capture = <&ssi1>, <&src1>, <&dvc1>;
723		};
724	};
725
726};
727
728&rpc {
729	pinctrl-0 = <&rpc_pins>;
730	pinctrl-names = "default";
731
732	/* Left disabled.  To be enabled by firmware when unlocked. */
733
734	flash@0 {
735		compatible = "cypress,hyperflash", "cfi-flash";
736		reg = <0>;
737
738		partitions {
739			compatible = "fixed-partitions";
740			#address-cells = <1>;
741			#size-cells = <1>;
742
743			bootparam@0 {
744				reg = <0x00000000 0x040000>;
745				read-only;
746			};
747			bl2@40000 {
748				reg = <0x00040000 0x140000>;
749				read-only;
750			};
751			cert_header_sa6@180000 {
752				reg = <0x00180000 0x040000>;
753				read-only;
754			};
755			bl31@1c0000 {
756				reg = <0x001c0000 0x040000>;
757				read-only;
758			};
759			tee@200000 {
760				reg = <0x00200000 0x440000>;
761				read-only;
762			};
763			uboot@640000 {
764				reg = <0x00640000 0x100000>;
765				read-only;
766			};
767			dtb@740000 {
768				reg = <0x00740000 0x080000>;
769			};
770			kernel@7c0000 {
771				reg = <0x007c0000 0x1400000>;
772			};
773			user@1bc0000 {
774				reg = <0x01bc0000 0x2440000>;
775			};
776		};
777	};
778};
779
780&rwdt {
781	timeout-sec = <60>;
782	status = "okay";
783};
784
785&scif2 {
786	pinctrl-0 = <&scif2_pins>;
787	pinctrl-names = "default";
788
789	status = "okay";
790};
791
792&sdhi0 {
793	pinctrl-0 = <&sdhi0_pins>;
794	pinctrl-1 = <&sdhi0_pins_uhs>;
795	pinctrl-names = "default", "state_uhs";
796
797	vmmc-supply = <&vcc_sdhi0>;
798	vqmmc-supply = <&vccq_sdhi0>;
799	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
800	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
801	bus-width = <4>;
802	sd-uhs-sdr50;
803	sd-uhs-sdr104;
804	status = "okay";
805};
806
807&sdhi1 {
808	pinctrl-0 = <&sdhi1_pins>;
809	pinctrl-1 = <&sdhi1_pins_uhs>;
810	pinctrl-names = "default", "state_uhs";
811
812	vmmc-supply = <&vcc_sdhi1>;
813	vqmmc-supply = <&vccq_sdhi1>;
814	cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
815	bus-width = <4>;
816	sd-uhs-sdr50;
817	sd-uhs-sdr104;
818	status = "okay";
819};
820
821&sdhi3 {
822	/* used for on-board 8bit eMMC */
823	pinctrl-0 = <&sdhi3_pins>;
824	pinctrl-1 = <&sdhi3_pins>;
825	pinctrl-names = "default", "state_uhs";
826
827	vmmc-supply = <&reg_3p3v>;
828	vqmmc-supply = <&reg_1p8v>;
829	mmc-hs200-1_8v;
830	mmc-hs400-1_8v;
831	bus-width = <8>;
832	no-sd;
833	no-sdio;
834	non-removable;
835	full-pwr-cycle-in-suspend;
836	status = "okay";
837};
838
839&ssi1 {
840	shared-pin;
841};
842
843&usb2_phy0 {
844	pinctrl-0 = <&usb0_pins>;
845	pinctrl-names = "default";
846
847	vbus-supply = <&vbus0_usb2>;
848	status = "okay";
849};
850
851&usb3_peri0 {
852	companion = <&xhci0>;
853	status = "okay";
854};
855
856&vin4 {
857	status = "okay";
858};
859
860&vin5 {
861	status = "okay";
862};
863
864&xhci0 {
865	pinctrl-0 = <&usb30_pins>;
866	pinctrl-names = "default";
867
868	status = "okay";
869};
870