xref: /linux/scripts/dtc/include-prefixes/arm64/qcom/sm6375.dtsi (revision 1260ed77798502de9c98020040d2995008de10cc)

// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
 */

#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/clock/qcom,sm6375-gcc.h>
#include <dt-bindings/clock/qcom,sm6375-gpucc.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/power/qcom-rpmpd.h>

/ {
	interrupt-parent = <&intc>;

	#address-cells = <2>;
	#size-cells = <2>;

	chosen { };

	clocks {
		xo_board_clk: xo-board-clk {
			compatible = "fixed-clock";
			#clock-cells = <0>;
		};

		sleep_clk: sleep-clk {
			compatible = "fixed-clock";
			clock-frequency = <32764>;
			#clock-cells = <0>;
		};
	};

	cpus {
		#address-cells = <2>;
		#size-cells = <0>;

		cpu0: cpu@0 {
			device_type = "cpu";
			compatible = "qcom,kryo660";
			reg = <0x0 0x0>;
			clocks = <&cpufreq_hw 0>;
			enable-method = "psci";
			next-level-cache = <&l2_0>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			operating-points-v2 = <&cpu0_opp_table>;
			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
			power-domains = <&cpu_pd0>;
			power-domain-names = "psci";
			#cooling-cells = <2>;
			l2_0: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&l3_0>;
				l3_0: l3-cache {
					compatible = "cache";
					cache-level = <3>;
					cache-unified;
				};
			};
		};

		cpu1: cpu@100 {
			device_type = "cpu";
			compatible = "qcom,kryo660";
			reg = <0x0 0x100>;
			clocks = <&cpufreq_hw 0>;
			enable-method = "psci";
			next-level-cache = <&l2_100>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			operating-points-v2 = <&cpu0_opp_table>;
			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
			power-domains = <&cpu_pd1>;
			power-domain-names = "psci";
			#cooling-cells = <2>;
			l2_100: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&l3_0>;
			};
		};

		cpu2: cpu@200 {
			device_type = "cpu";
			compatible = "qcom,kryo660";
			reg = <0x0 0x200>;
			clocks = <&cpufreq_hw 0>;
			enable-method = "psci";
			next-level-cache = <&l2_200>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			operating-points-v2 = <&cpu0_opp_table>;
			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
			power-domains = <&cpu_pd2>;
			power-domain-names = "psci";
			#cooling-cells = <2>;
			l2_200: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&l3_0>;
			};
		};

		cpu3: cpu@300 {
			device_type = "cpu";
			compatible = "qcom,kryo660";
			reg = <0x0 0x300>;
			clocks = <&cpufreq_hw 0>;
			enable-method = "psci";
			next-level-cache = <&l2_300>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			operating-points-v2 = <&cpu0_opp_table>;
			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
			power-domains = <&cpu_pd3>;
			power-domain-names = "psci";
			#cooling-cells = <2>;
			l2_300: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&l3_0>;
			};
		};

		cpu4: cpu@400 {
			device_type = "cpu";
			compatible = "qcom,kryo660";
			reg = <0x0 0x400>;
			clocks = <&cpufreq_hw 0>;
			enable-method = "psci";
			next-level-cache = <&l2_400>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			operating-points-v2 = <&cpu0_opp_table>;
			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
			power-domains = <&cpu_pd4>;
			power-domain-names = "psci";
			#cooling-cells = <2>;
			l2_400: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&l3_0>;
			};
		};

		cpu5: cpu@500 {
			device_type = "cpu";
			compatible = "qcom,kryo660";
			reg = <0x0 0x500>;
			clocks = <&cpufreq_hw 0>;
			enable-method = "psci";
			next-level-cache = <&l2_500>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			operating-points-v2 = <&cpu0_opp_table>;
			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
			power-domains = <&cpu_pd5>;
			power-domain-names = "psci";
			#cooling-cells = <2>;
			l2_500: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&l3_0>;
			};
		};

		cpu6: cpu@600 {
			device_type = "cpu";
			compatible = "qcom,kryo660";
			reg = <0x0 0x600>;
			clocks = <&cpufreq_hw 1>;
			enable-method = "psci";
			next-level-cache = <&l2_600>;
			qcom,freq-domain = <&cpufreq_hw 1>;
			operating-points-v2 = <&cpu6_opp_table>;
			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
			power-domains = <&cpu_pd6>;
			power-domain-names = "psci";
			#cooling-cells = <2>;
			l2_600: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&l3_0>;
			};
		};

		cpu7: cpu@700 {
			device_type = "cpu";
			compatible = "qcom,kryo660";
			reg = <0x0 0x700>;
			clocks = <&cpufreq_hw 1>;
			enable-method = "psci";
			next-level-cache = <&l2_700>;
			qcom,freq-domain = <&cpufreq_hw 1>;
			operating-points-v2 = <&cpu6_opp_table>;
			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
			power-domains = <&cpu_pd7>;
			power-domain-names = "psci";
			#cooling-cells = <2>;
			l2_700: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&l3_0>;
			};
		};

		cpu-map {
			cluster0 {
				core0 {
					cpu = <&cpu0>;
				};

				core1 {
					cpu = <&cpu1>;
				};

				core2 {
					cpu = <&cpu2>;
				};

				core3 {
					cpu = <&cpu3>;
				};

				core4 {
					cpu = <&cpu4>;
				};

				core5 {
					cpu = <&cpu5>;
				};

				core6 {
					cpu = <&cpu6>;
				};

				core7 {
					cpu = <&cpu7>;
				};
			};
		};

		idle-states {
			entry-method = "psci";

			little_cpu_sleep_0: cpu-sleep-0-0 {
				compatible = "arm,idle-state";
				idle-state-name = "silver-power-collapse";
				arm,psci-suspend-param = <0x40000003>;
				entry-latency-us = <549>;
				exit-latency-us = <901>;
				min-residency-us = <1774>;
				local-timer-stop;
			};

			little_cpu_sleep_1: cpu-sleep-0-1 {
				compatible = "arm,idle-state";
				idle-state-name = "silver-rail-power-collapse";
				arm,psci-suspend-param = <0x40000004>;
				entry-latency-us = <702>;
				exit-latency-us = <915>;
				min-residency-us = <4001>;
				local-timer-stop;
			};

			big_cpu_sleep_0: cpu-sleep-1-0 {
				compatible = "arm,idle-state";
				idle-state-name = "gold-power-collapse";
				arm,psci-suspend-param = <0x40000003>;
				entry-latency-us = <523>;
				exit-latency-us = <1244>;
				min-residency-us = <2207>;
				local-timer-stop;
			};

			big_cpu_sleep_1: cpu-sleep-1-1 {
				compatible = "arm,idle-state";
				idle-state-name = "gold-rail-power-collapse";
				arm,psci-suspend-param = <0x40000004>;
				entry-latency-us = <526>;
				exit-latency-us = <1854>;
				min-residency-us = <5555>;
				local-timer-stop;
			};
		};

		domain-idle-states {
			cluster_sleep_0: cluster-sleep-0 {
				compatible = "domain-idle-state";
				arm,psci-suspend-param = <0x41000044>;
				entry-latency-us = <2752>;
				exit-latency-us = <3048>;
				min-residency-us = <6118>;
			};
		};
	};

	firmware {
		scm {
			compatible = "qcom,scm-sm6375", "qcom,scm";
			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
			clock-names = "core";
			#reset-cells = <1>;
		};
	};

	mpm: interrupt-controller {
		compatible = "qcom,mpm";
		qcom,rpm-msg-ram = <&apss_mpm>;
		interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
		mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_SMP2P>;
		interrupt-controller;
		#interrupt-cells = <2>;
		#power-domain-cells = <0>;
		interrupt-parent = <&intc>;
		qcom,mpm-pin-count = <96>;
		qcom,mpm-pin-map = <5 296>,  /* Soundwire wake_irq */
				   <12 422>, /* DWC3 ss_phy_irq */
				   <86 183>, /* MPM wake, SPMI */
				   <89 314>, /* TSENS0 0C */
				   <90 315>, /* TSENS1 0C */
				   <93 164>, /* DWC3 dm_hs_phy_irq */
				   <94 165>; /* DWC3 dp_hs_phy_irq */
	};

	memory@80000000 {
		device_type = "memory";
		/* We expect the bootloader to fill in the size */
		reg = <0x0 0x80000000 0x0 0x0>;
	};

	cpu0_opp_table: opp-table-cpu0 {
		compatible = "operating-points-v2";
		opp-shared;

		opp-300000000 {
			opp-hz = /bits/ 64 <300000000>;
			opp-peak-kBps = <(300000 * 32)>;
		};

		opp-576000000 {
			opp-hz = /bits/ 64 <576000000>;
			opp-peak-kBps = <(556800 * 32)>;
		};

		opp-691200000 {
			opp-hz = /bits/ 64 <691200000>;
			opp-peak-kBps = <(652800 * 32)>;
		};

		opp-940800000 {
			opp-hz = /bits/ 64 <940800000>;
			opp-peak-kBps = <(921600 * 32)>;
		};

		opp-1113600000 {
			opp-hz = /bits/ 64 <1113600000>;
			opp-peak-kBps = <(921600 * 32)>;
		};

		opp-1324800000 {
			opp-hz = /bits/ 64 <1324800000>;
			opp-peak-kBps = <(1171200 * 32)>;
		};

		opp-1516800000 {
			opp-hz = /bits/ 64 <1516800000>;
			opp-peak-kBps = <(1497600 * 32)>;
		};

		opp-1651200000 {
			opp-hz = /bits/ 64 <1651200000>;
			opp-peak-kBps = <(1497600 * 32)>;
		};

		opp-1708800000 {
			opp-hz = /bits/ 64 <1708800000>;
			opp-peak-kBps = <(1497600 * 32)>;
		};

		opp-1804800000 {
			opp-hz = /bits/ 64 <1804800000>;
			opp-peak-kBps = <(1497600 * 32)>;
		};
	};

	cpu6_opp_table: opp-table-cpu6 {
		compatible = "operating-points-v2";
		opp-shared;

		opp-691200000 {
			opp-hz = /bits/ 64 <691200000>;
			opp-peak-kBps = <(556800 * 32)>;
		};

		opp-940800000 {
			opp-hz = /bits/ 64 <940800000>;
			opp-peak-kBps = <(921600 * 32)>;
		};

		opp-1228800000 {
			opp-hz = /bits/ 64 <1228800000>;
			opp-peak-kBps = <(1171200 * 32)>;
		};

		opp-1401600000 {
			opp-hz = /bits/ 64 <1401600000>;
			opp-peak-kBps = <(1382400 * 32)>;
		};

		opp-1516800000 {
			opp-hz = /bits/ 64 <1516800000>;
			opp-peak-kBps = <(1497600 * 32)>;
		};

		opp-1651200000 {
			opp-hz = /bits/ 64 <1651200000>;
			opp-peak-kBps = <(1497600 * 32)>;
		};

		opp-1804800000 {
			opp-hz = /bits/ 64 <1804800000>;
			opp-peak-kBps = <(1497600 * 32)>;
		};

		opp-1900800000 {
			opp-hz = /bits/ 64 <1900800000>;
			opp-peak-kBps = <(1497600 * 32)>;
		};

		opp-2054400000 {
			opp-hz = /bits/ 64 <2054400000>;
			opp-peak-kBps = <(1497600 * 32)>;
		};

		opp-2208000000 {
			opp-hz = /bits/ 64 <2208000000>;
			opp-peak-kBps = <(1497600 * 32)>;
		};
	};

	pmu {
		compatible = "arm,armv8-pmuv3";
		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
	};

	psci {
		compatible = "arm,psci-1.0";
		method = "smc";

		cpu_pd0: power-domain-cpu0 {
			#power-domain-cells = <0>;
			power-domains = <&cluster_pd>;
			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
		};

		cpu_pd1: power-domain-cpu1 {
			#power-domain-cells = <0>;
			power-domains = <&cluster_pd>;
			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
		};

		cpu_pd2: power-domain-cpu2 {
			#power-domain-cells = <0>;
			power-domains = <&cluster_pd>;
			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
		};

		cpu_pd3: power-domain-cpu3 {
			#power-domain-cells = <0>;
			power-domains = <&cluster_pd>;
			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
		};

		cpu_pd4: power-domain-cpu4 {
			#power-domain-cells = <0>;
			power-domains = <&cluster_pd>;
			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
		};

		cpu_pd5: power-domain-cpu5 {
			#power-domain-cells = <0>;
			power-domains = <&cluster_pd>;
			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
		};

		cpu_pd6: power-domain-cpu6 {
			#power-domain-cells = <0>;
			power-domains = <&cluster_pd>;
			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
		};

		cpu_pd7: power-domain-cpu7 {
			#power-domain-cells = <0>;
			power-domains = <&cluster_pd>;
			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
		};

		cluster_pd: power-domain-cpu-cluster0 {
			#power-domain-cells = <0>;
			power-domains = <&mpm>;
			domain-idle-states = <&cluster_sleep_0>;
		};
	};

	qup_opp_table: opp-table-qup {
		compatible = "operating-points-v2";

		opp-75000000 {
			opp-hz = /bits/ 64 <75000000>;
			required-opps = <&rpmpd_opp_low_svs>;
		};

		opp-100000000 {
			opp-hz = /bits/ 64 <100000000>;
			required-opps = <&rpmpd_opp_svs>;
		};

		opp-128000000 {
			opp-hz = /bits/ 64 <128000000>;
			required-opps = <&rpmpd_opp_nom>;
		};
	};

	reserved_memory: reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		hyp_mem: hypervisor@80000000 {
			reg = <0 0x80000000 0 0x600000>;
			no-map;
		};

		xbl_aop_mem: xbl-aop@80700000 {
			reg = <0 0x80700000 0 0x100000>;
			no-map;
		};

		reserved_xbl_uefi: xbl-uefi-res@80880000 {
			reg = <0 0x80880000 0 0x14000>;
			no-map;
		};

		smem_mem: smem@80900000 {
			compatible = "qcom,smem";
			reg = <0 0x80900000 0 0x200000>;
			hwlocks = <&tcsr_mutex 3>;
			no-map;
		};

		fw_mem: fw@80b00000 {
			reg = <0 0x80b00000 0 0x100000>;
			no-map;
		};

		cdsp_secure_heap_mem: cdsp-sec-heap@80c00000 {
			reg = <0 0x80c00000 0 0x1e00000>;
			no-map;
		};

		dfps_data_mem: dpfs-data@85e00000 {
			reg = <0 0x85e00000 0 0x100000>;
			no-map;
		};

		pil_wlan_mem: pil-wlan@86500000 {
			reg = <0 0x86500000 0 0x200000>;
			no-map;
		};

		pil_adsp_mem: pil-adsp@86700000 {
			reg = <0 0x86700000 0 0x2000000>;
			no-map;
		};

		pil_cdsp_mem: pil-cdsp@88700000 {
			reg = <0 0x88700000 0 0x1e00000>;
			no-map;
		};

		pil_video_mem: pil-video@8a500000 {
			reg = <0 0x8a500000 0 0x500000>;
			no-map;
		};

		pil_ipa_fw_mem: pil-ipa-fw@8aa00000 {
			reg = <0 0x8aa00000 0 0x10000>;
			no-map;
		};

		pil_ipa_gsi_mem: pil-ipa-gsi@8aa10000 {
			reg = <0 0x8aa10000 0 0xa000>;
			no-map;
		};

		pil_gpu_micro_code_mem: pil-gpu-ucode@8aa1a000 {
			reg = <0 0x8aa1a000 0 0x2000>;
			no-map;
		};

		pil_mpss_wlan_mem: pil-mpss-wlan@8b800000 {
			reg = <0 0x8b800000 0 0x10000000>;
			no-map;
		};

		removed_mem: removed@c0000000 {
			reg = <0 0xc0000000 0 0x5100000>;
			no-map;
		};

		rmtfs_mem: rmtfs@f3900000 {
			compatible = "qcom,rmtfs-mem";
			reg = <0 0xf3900000 0 0x280000>;
			no-map;

			qcom,client-id = <1>;
			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>;
		};

		debug_mem: debug@ffb00000 {
			reg = <0 0xffb00000 0 0xc0000>;
			no-map;
		};

		last_log_mem: lastlog@ffbc0000 {
			reg = <0 0xffbc0000 0 0x80000>;
			no-map;
		};

		cmdline_region: cmdline@ffd00000 {
			reg = <0 0xffd00000 0 0x1000>;
			no-map;
		};
	};

	rpm: remoteproc {
		compatible = "qcom,sm6375-rpm-proc", "qcom,rpm-proc";

		glink-edge {
			compatible = "qcom,glink-rpm";
			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
						     IPCC_MPROC_SIGNAL_GLINK_QMP
						     IRQ_TYPE_EDGE_RISING>;
			qcom,rpm-msg-ram = <&rpm_msg_ram>;
			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;

			rpm_requests: rpm-requests {
				compatible = "qcom,rpm-sm6375", "qcom,glink-smd-rpm";
				qcom,glink-channels = "rpm_requests";

				rpmcc: clock-controller {
					compatible = "qcom,rpmcc-sm6375", "qcom,rpmcc";
					clocks = <&xo_board_clk>;
					clock-names = "xo";
					#clock-cells = <1>;
				};

				rpmpd: power-controller {
					compatible = "qcom,sm6375-rpmpd";
					#power-domain-cells = <1>;
					operating-points-v2 = <&rpmpd_opp_table>;

					rpmpd_opp_table: opp-table {
						compatible = "operating-points-v2";

						rpmpd_opp_ret: opp1 {
							opp-level = <RPM_SMD_LEVEL_RETENTION>;
						};

						rpmpd_opp_min_svs: opp2 {
							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
						};

						rpmpd_opp_low_svs: opp3 {
							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
						};

						rpmpd_opp_svs: opp4 {
							opp-level = <RPM_SMD_LEVEL_SVS>;
						};

						rpmpd_opp_svs_plus: opp5 {
							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
						};

						rpmpd_opp_nom: opp6 {
							opp-level = <RPM_SMD_LEVEL_NOM>;
						};

						rpmpd_opp_nom_plus: opp7 {
							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
						};

						rpmpd_opp_turbo: opp8 {
							opp-level = <RPM_SMD_LEVEL_TURBO>;
						};

						rpmpd_opp_turbo_no_cpr: opp9 {
							opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
						};
					};
				};
			};
		};
	};

	smp2p-adsp {
		compatible = "qcom,smp2p";
		qcom,smem = <443>, <429>;
		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
					     IPCC_MPROC_SIGNAL_SMP2P
					     IRQ_TYPE_EDGE_RISING>;
		mboxes = <&ipcc IPCC_CLIENT_LPASS
				IPCC_MPROC_SIGNAL_SMP2P>;

		qcom,local-pid = <0>;
		qcom,remote-pid = <2>;

		smp2p_adsp_out: master-kernel {
			qcom,entry-name = "master-kernel";
			#qcom,smem-state-cells = <1>;
		};

		smp2p_adsp_in: slave-kernel {
			qcom,entry-name = "slave-kernel";
			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	smp2p-cdsp {
		compatible = "qcom,smp2p";
		qcom,smem = <94>, <432>;
		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
					     IPCC_MPROC_SIGNAL_SMP2P
					     IRQ_TYPE_EDGE_RISING>;
		mboxes = <&ipcc IPCC_CLIENT_CDSP
				IPCC_MPROC_SIGNAL_SMP2P>;

		qcom,local-pid = <0>;
		qcom,remote-pid = <5>;

		smp2p_cdsp_out: master-kernel {
			qcom,entry-name = "master-kernel";
			#qcom,smem-state-cells = <1>;
		};

		smp2p_cdsp_in: slave-kernel {
			qcom,entry-name = "slave-kernel";
			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	smp2p-modem {
		compatible = "qcom,smp2p";
		qcom,smem = <435>, <428>;
		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
					     IPCC_MPROC_SIGNAL_SMP2P
					     IRQ_TYPE_EDGE_RISING>;
		mboxes = <&ipcc IPCC_CLIENT_MPSS
				IPCC_MPROC_SIGNAL_SMP2P>;

		qcom,local-pid = <0>;
		qcom,remote-pid = <1>;

		smp2p_modem_out: master-kernel {
			qcom,entry-name = "master-kernel";
			#qcom,smem-state-cells = <1>;
		};

		smp2p_modem_in: slave-kernel {
			qcom,entry-name = "slave-kernel";
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		ipa_smp2p_out: ipa-ap-to-modem {
			qcom,entry-name = "ipa";
			#qcom,smem-state-cells = <1>;
		};

		ipa_smp2p_in: ipa-modem-to-ap {
			qcom,entry-name = "ipa";
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		wlan_smp2p_in: wlan-wpss-to-ap {
			qcom,entry-name = "wlan";
			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	soc: soc@0 {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges = <0 0 0 0 0x10 0>;
		dma-ranges = <0 0 0 0 0x10 0>;
		compatible = "simple-bus";

		ipcc: mailbox@208000 {
			compatible = "qcom,sm6375-ipcc", "qcom,ipcc";
			reg = <0 0x00208000 0 0x1000>;
			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-controller;
			#interrupt-cells = <3>;
			#mbox-cells = <2>;
		};

		tcsr_mutex: hwlock@340000 {
			compatible = "qcom,tcsr-mutex";
			reg = <0x0 0x00340000 0x0 0x40000>;
			#hwlock-cells = <1>;
		};

		tlmm: pinctrl@500000 {
			compatible = "qcom,sm6375-tlmm";
			reg = <0 0x00500000 0 0x800000>;
			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
			gpio-ranges = <&tlmm 0 0 157>;
			wakeup-parent = <&mpm>;
			interrupt-controller;
			gpio-controller;
			#interrupt-cells = <2>;
			#gpio-cells = <2>;

			sdc2_off_state: sdc2-off-state {
				clk-pins {
					pins = "sdc2_clk";
					drive-strength = <2>;
					bias-disable;
				};

				cmd-pins {
					pins = "sdc2_cmd";
					drive-strength = <2>;
					bias-pull-up;
				};

				data-pins {
					pins = "sdc2_data";
					drive-strength = <2>;
					bias-pull-up;
				};
			};

			sdc2_on_state: sdc2-on-state {
				clk-pins {
					pins = "sdc2_clk";
					drive-strength = <16>;
					bias-disable;
				};

				cmd-pins {
					pins = "sdc2_cmd";
					drive-strength = <10>;
					bias-pull-up;
				};

				data-pins {
					pins = "sdc2_data";
					drive-strength = <10>;
					bias-pull-up;
				};
			};

			qup_i2c0_default: qup-i2c0-default-state {
				pins = "gpio0", "gpio1";
				function = "qup00";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_i2c1_default: qup-i2c1-default-state {
				pins = "gpio61", "gpio62";
				function = "qup01";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_i2c2_default: qup-i2c2-default-state {
				pins = "gpio45", "gpio46";
				function = "qup02";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_i2c8_default: qup-i2c8-default-state {
				pins = "gpio19", "gpio20";
				/* TLMM, GCC and vendor DT all have different indices.. */
				function = "qup12";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_i2c10_default: qup-i2c10-default-state {
				pins = "gpio4", "gpio5";
				function = "qup10";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_spi0_default: qup-spi0-default-state {
				pins = "gpio0", "gpio1", "gpio2", "gpio3";
				function = "qup00";
				drive-strength = <6>;
				bias-disable;
			};

			qup_uart1_default: qup-uart1-default-state {
				cts-pins {
					pins = "gpio61";
					function = "qup01";
					drive-strength = <2>;
					bias-pull-down;
				};

				rts-pins {
					pins = "gpio62";
					function = "qup01";
					drive-strength = <2>;
					bias-disable;
				};

				tx-pins {
					pins = "gpio63";
					function = "qup01";
					drive-strength = <2>;
					bias-disable;
				};

				rx-pins {
					pins = "gpio64";
					function = "qup01";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		gcc: clock-controller@1400000 {
			compatible = "qcom,sm6375-gcc";
			reg = <0 0x01400000 0 0x1f0000>;
			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
				 <&sleep_clk>;
			#power-domain-cells = <1>;
			#clock-cells = <1>;
			#reset-cells = <1>;
		};

		usb_1_hsphy: phy@162b000 {
			compatible = "qcom,sm6375-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy";
			reg = <0 0x0162b000 0 0x400>;

			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
			clock-names = "ref";
			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
			#phy-cells = <0>;

			status = "disabled";
		};

		spmi_bus: spmi@1c40000 {
			compatible = "qcom,spmi-pmic-arb";
			reg = <0 0x01c40000 0 0x1100>,
			      <0 0x01e00000 0 0x2000000>,
			      <0 0x03e00000 0 0x100000>,
			      <0 0x03f00000 0 0xa0000>,
			      <0 0x01c0a000 0 0x26000>;
			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
			interrupt-names = "periph_irq";
			interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>;
			qcom,ee = <0>;
			qcom,channel = <0>;
			#address-cells = <2>;
			#size-cells = <0>;
			interrupt-controller;
			#interrupt-cells = <4>;
		};

		tsens0: thermal-sensor@4411000 {
			compatible = "qcom,sm6375-tsens", "qcom,tsens-v2";
			reg = <0 0x04411000 0 0x140>, /* TM */
			      <0 0x04410000 0 0x20>;  /* SROT */
			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "uplow", "critical";
			#thermal-sensor-cells = <1>;
			#qcom,sensors = <15>;
		};

		tsens1: thermal-sensor@4413000 {
			compatible = "qcom,sm6375-tsens", "qcom,tsens-v2";
			reg = <0 0x04413000 0 0x140>, /* TM */
			      <0 0x04412000 0 0x20>;  /* SROT */
			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "uplow", "critical";
			#thermal-sensor-cells = <1>;
			#qcom,sensors = <11>;
		};

		rpm_msg_ram: sram@45f0000 {
			compatible = "qcom,rpm-msg-ram", "mmio-sram";
			reg = <0 0x045f0000 0 0x7000>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0 0x0 0x045f0000 0x7000>;

			apss_mpm: sram@1b8 {
				reg = <0x1b8 0x48>;
			};
		};

		sram@4690000 {
			compatible = "qcom,rpm-stats";
			reg = <0 0x04690000 0 0x400>;
		};

		sdhc_2: mmc@4784000 {
			compatible = "qcom,sm6375-sdhci", "qcom,sdhci-msm-v5";
			reg = <0 0x04784000 0 0x1000>;

			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hc_irq", "pwr_irq";

			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
				 <&gcc GCC_SDCC2_APPS_CLK>,
				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
			clock-names = "iface", "core", "xo";
			resets = <&gcc GCC_SDCC2_BCR>;
			iommus = <&apps_smmu 0x40 0x0>;

			pinctrl-0 = <&sdc2_on_state>;
			pinctrl-1 = <&sdc2_off_state>;
			pinctrl-names = "default", "sleep";

			qcom,dll-config = <0x0007642c>;
			qcom,ddr-config = <0x80040868>;
			power-domains = <&rpmpd SM6375_VDDCX>;
			operating-points-v2 = <&sdhc2_opp_table>;
			bus-width = <4>;

			status = "disabled";

			sdhc2_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-100000000 {
					opp-hz = /bits/ 64 <100000000>;
					required-opps = <&rpmpd_opp_low_svs>;
				};

				opp-202000000 {
					opp-hz = /bits/ 64 <202000000>;
					required-opps = <&rpmpd_opp_svs_plus>;
				};
			};
		};

		gpi_dma0: dma-controller@4a00000 {
			compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma";
			reg = <0 0x04a00000 0 0x60000>;
			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
			dma-channels = <10>;
			dma-channel-mask = <0x1f>;
			iommus = <&apps_smmu 0x16 0x0>;
			#dma-cells = <3>;
			status = "disabled";
		};

		qupv3_id_0: geniqup@4ac0000 {
			compatible = "qcom,geni-se-qup";
			reg = <0x0 0x04ac0000 0x0 0x2000>;
			clock-names = "m-ahb", "s-ahb";
			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
			iommus = <&apps_smmu 0x3 0x0>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges;
			status = "disabled";

			i2c0: i2c@4a80000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x04a80000 0x0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c0_default>;
				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			spi0: spi@4a80000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x04a80000 0x0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi0_default>;
				power-domains = <&rpmpd SM6375_VDDCX>;
				operating-points-v2 = <&qup_opp_table>;
				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			i2c1: i2c@4a84000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x04a84000 0x0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c1_default>;
				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			spi1: spi@4a84000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x04a84000 0x0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmpd SM6375_VDDCX>;
				operating-points-v2 = <&qup_opp_table>;
				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			uart1: serial@4a84000 {
				compatible = "qcom,geni-uart";
				reg = <0x0 0x04a84000 0x0 0x4000>;
				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
				clock-names = "se";
				power-domains = <&rpmpd SM6375_VDDCX>;
				operating-points-v2 = <&qup_opp_table>;
				pinctrl-0 = <&qup_uart1_default>;
				pinctrl-names = "default";
				status = "disabled";
			};

			i2c2: i2c@4a88000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x04a88000 0x0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c2_default>;
				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			spi2: spi@4a88000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x04a88000 0x0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmpd SM6375_VDDCX>;
				operating-points-v2 = <&qup_opp_table>;
				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			/*
			 * As per GCC, QUP3/4/5/11 also exist, but are not even defined downstream.
			 * There is a comment in the included DTSI of another SoC saying that they
			 * are not "bolled out" (probably meaning not routed to solder balls)
			 * TLMM driver however, suggests there are as many as 15 QUPs in total!
			 * Most of which don't even have pin configurations for.. Sad stuff!
			 */
		};

		gpi_dma1: dma-controller@4c00000 {
			compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma";
			reg = <0 0x04c00000 0 0x60000>;
			interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
			dma-channels = <10>;
			dma-channel-mask = <0x1f>;
			iommus = <&apps_smmu 0xd6 0x0>;
			#dma-cells = <3>;
			status = "disabled";
		};

		qupv3_id_1: geniqup@4cc0000 {
			compatible = "qcom,geni-se-qup";
			reg = <0x0 0x04cc0000 0x0 0x2000>;
			clock-names = "m-ahb", "s-ahb";
			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
			iommus = <&apps_smmu 0xc3 0x0>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges;
			status = "disabled";

			i2c6: i2c@4c80000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x04c80000 0x0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
				interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			spi6: spi@4c80000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x04c80000 0x0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
				interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmpd SM6375_VDDCX>;
				operating-points-v2 = <&qup_opp_table>;
				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			i2c7: i2c@4c84000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x04c84000 0x0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
				interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			spi7: spi@4c84000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x04c84000 0x0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
				interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmpd SM6375_VDDCX>;
				operating-points-v2 = <&qup_opp_table>;
				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			i2c8: i2c@4c88000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x04c88000 0x0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
				interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c8_default>;
				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			spi8: spi@4c88000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x04c88000 0x0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
				interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmpd SM6375_VDDCX>;
				operating-points-v2 = <&qup_opp_table>;
				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			i2c9: i2c@4c8c000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x04c8c000 0x0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
				interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>;
				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			spi9: spi@4c8c000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x04c8c000 0x0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
				interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmpd SM6375_VDDCX>;
				operating-points-v2 = <&qup_opp_table>;
				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			i2c10: i2c@4c90000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x04c90000 0x0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
				interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c10_default>;
				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			spi10: spi@4c90000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x04c90000 0x0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
				interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmpd SM6375_VDDCX>;
				operating-points-v2 = <&qup_opp_table>;
				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};
		};

		usb_1: usb@4ef8800 {
			compatible = "qcom,sm6375-dwc3", "qcom,dwc3";
			reg = <0 0x04ef8800 0 0x400>;

			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
			clock-names = "cfg_noc",
				      "core",
				      "iface",
				      "sleep",
				      "mock_utmi",
				      "xo";

			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
			assigned-clock-rates = <19200000>, <133333333>;

			interrupts-extended = <&intc GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
					      <&intc GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
					      <&mpm 94 IRQ_TYPE_EDGE_BOTH>,
					      <&mpm 93 IRQ_TYPE_EDGE_BOTH>,
					      <&mpm 12 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "pwr_event",
					  "hs_phy_irq",
					  "dp_hs_phy_irq",
					  "dm_hs_phy_irq",
					  "ss_phy_irq";

			power-domains = <&gcc USB30_PRIM_GDSC>;

			resets = <&gcc GCC_USB30_PRIM_BCR>;

			/*
			 * This property is there to allow USB2 to work, as
			 * USB3 is not implemented yet - (re)move it when
			 * proper support is in place.
			 */
			qcom,select-utmi-as-pipe-clk;

			#address-cells = <2>;
			#size-cells = <2>;
			ranges;

			status = "disabled";

			usb_1_dwc3: usb@4e00000 {
				compatible = "snps,dwc3";
				reg = <0 0x04e00000 0 0xcd00>;
				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
				maximum-speed = "high-speed";
				phys = <&usb_1_hsphy>;
				phy-names = "usb2-phy";
				iommus = <&apps_smmu 0xe0 0x0>;

				/* Yes, this impl *does* have an unfunny number of quirks.. */
				snps,hird-threshold = /bits/ 8 <0x10>;
				snps,usb2-gadget-lpm-disable;
				snps,dis_u2_susphy_quirk;
				snps,is-utmi-l1-suspend;
				snps,dis-u1-entry-quirk;
				snps,dis-u2-entry-quirk;
				snps,usb3_lpm_capable;
				snps,has-lpm-erratum;
				tx-fifo-resize;
			};
		};

		adreno_smmu: iommu@5940000 {
			compatible = "qcom,sm6375-smmu-v2", "qcom,smmu-v2";
			reg = <0 0x05940000 0 0x10000>;
			#iommu-cells = <1>;
			#global-interrupts = <2>;
			interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
			clock-names = "bus";

			power-domains = <&gpucc GPU_CX_GDSC>;
		};

		gpucc: clock-controller@5990000 {
			compatible = "qcom,sm6375-gpucc";
			reg = <0 0x05990000 0 0x9000>;
			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>,
				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
			power-domains = <&rpmpd SM6375_VDDGX>;
			required-opps = <&rpmpd_opp_low_svs>;
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
		};

		remoteproc_mss: remoteproc@6080000 {
			compatible = "qcom,sm6375-mpss-pas";
			reg = <0x0 0x06080000 0x0 0x10000>;

			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "wdog",
					  "fatal",
					  "ready",
					  "handover",
					  "stop-ack",
					  "shutdown-ack";

			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
			clock-names = "xo";

			power-domains = <&rpmpd SM6375_VDDCX>;
			power-domain-names = "cx";

			memory-region = <&pil_mpss_wlan_mem>;

			qcom,smem-states = <&smp2p_modem_out 0>;
			qcom,smem-state-names = "stop";

			status = "disabled";

			glink-edge {
				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
							     IPCC_MPROC_SIGNAL_GLINK_QMP
							     IRQ_TYPE_EDGE_RISING>;
				mboxes = <&ipcc IPCC_CLIENT_MPSS
						IPCC_MPROC_SIGNAL_GLINK_QMP>;
				label = "modem";
				qcom,remote-pid = <1>;
			};
		};

		remoteproc_adsp: remoteproc@a400000 {
			compatible = "qcom,sm6375-adsp-pas";
			reg = <0 0x0a400000 0 0x10000>;

			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "wdog", "fatal", "ready",
					  "handover", "stop-ack";

			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
			clock-names = "xo";

			power-domains = <&rpmpd SM6375_VDD_LPI_CX>,
					<&rpmpd SM6375_VDD_LPI_MX>;
			power-domain-names = "lcx", "lmx";

			memory-region = <&pil_adsp_mem>;

			qcom,smem-states = <&smp2p_adsp_out 0>;
			qcom,smem-state-names = "stop";

			status = "disabled";

			glink-edge {
				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
							     IPCC_MPROC_SIGNAL_GLINK_QMP
							     IRQ_TYPE_EDGE_RISING>;
				mboxes = <&ipcc IPCC_CLIENT_LPASS
						IPCC_MPROC_SIGNAL_GLINK_QMP>;

				label = "lpass";
				qcom,remote-pid = <2>;
			};
		};

		remoteproc_cdsp: remoteproc@b300000 {
			compatible = "qcom,sm6375-cdsp-pas";
			reg = <0x0 0x0b300000 0x0 0x10000>;

			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "wdog", "fatal", "ready",
					  "handover", "stop-ack";

			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
			clock-names = "xo";

			power-domains = <&rpmpd SM6375_VDDCX>;
			power-domain-names = "cx";

			memory-region = <&pil_cdsp_mem>;

			qcom,smem-states = <&smp2p_cdsp_out 0>;
			qcom,smem-state-names = "stop";

			status = "disabled";

			glink-edge {
				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
							     IPCC_MPROC_SIGNAL_GLINK_QMP
							     IRQ_TYPE_EDGE_RISING>;
				mboxes = <&ipcc IPCC_CLIENT_CDSP
						IPCC_MPROC_SIGNAL_GLINK_QMP>;
				label = "cdsp";
				qcom,remote-pid = <5>;
			};
		};

		sram@c125000 {
			compatible = "qcom,sm6375-imem", "syscon", "simple-mfd";
			reg = <0 0x0c125000 0 0x1000>;
			ranges = <0 0 0x0c125000 0x1000>;

			#address-cells = <1>;
			#size-cells = <1>;

			pil-reloc@94c {
				compatible = "qcom,pil-reloc-info";
				reg = <0x94c 0xc8>;
			};
		};

		apps_smmu: iommu@c600000 {
			compatible = "qcom,sm6375-smmu-500", "arm,mmu-500";
			reg = <0 0x0c600000 0 0x100000>;
			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;

			power-domains = <&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_RT_GDSC>,
					<&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_NRT_GDSC>,
					<&gcc HLOS1_VOTE_TURING_MMU_TBU0_GDSC>;
			#global-interrupts = <1>;
			#iommu-cells = <2>;
		};

		wifi: wifi@c800000 {
			compatible = "qcom,wcn3990-wifi";
			reg = <0 0x0c800000 0 0x800000>;
			reg-names = "membase";
			memory-region = <&pil_wlan_mem>;
			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
			iommus = <&apps_smmu 0x80 0x1>;
			qcom,msa-fixed-perm;
			status = "disabled";
		};

		intc: interrupt-controller@f200000 {
			compatible = "arm,gic-v3";
			reg = <0x0 0x0f200000 0x0 0x10000>,  /* GICD */
			      <0x0 0x0f240000 0x0 0x100000>; /* GICR * 8 */
			interrupts = <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>;
			#redistributor-regions = <1>;
			#interrupt-cells = <3>;
			redistributor-stride = <0 0x20000>;
			interrupt-controller;
		};

		timer@f420000 {
			compatible = "arm,armv7-timer-mem";
			reg = <0 0x0f420000 0 0x1000>;
			ranges = <0 0 0 0x20000000>;
			#address-cells = <1>;
			#size-cells = <1>;

			frame@f421000 {
				reg = <0x0f421000 0x1000>, <0x0f422000 0x1000>;
				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <0>;
			};

			frame@f423000 {
				reg = <0x0f243000 0x1000>;
				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <1>;
				status = "disabled";
			};

			frame@f425000 {
				reg = <0x0f425000 0x1000>;
				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <2>;
				status = "disabled";
			};

			frame@f427000 {
				reg = <0x0f427000 0x1000>;
				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <3>;
				status = "disabled";
			};

			frame@f429000 {
				reg = <0x0f429000 0x1000>;
				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <4>;
				status = "disabled";
			};

			frame@f42b000 {
				reg = <0x0f42b000 0x1000>;
				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <5>;
				status = "disabled";
			};

			frame@f42d000 {
				reg = <0x0f42d000 0x1000>;
				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <6>;
				status = "disabled";
			};
		};

		cpucp_l3: interconnect@fd90000 {
			compatible = "qcom,sm6375-cpucp-l3", "qcom,epss-l3";
			reg = <0 0x0fd90000 0 0x1000>;

			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
			clock-names = "xo", "alternate";
			#interconnect-cells = <1>;
		};

		cpufreq_hw: cpufreq@fd91000 {
			compatible = "qcom,sm6375-cpufreq-epss", "qcom,cpufreq-epss";
			reg = <0 0x0fd91000 0 0x1000>, <0 0x0fd92000 0 0x1000>;
			reg-names = "freq-domain0", "freq-domain1";

			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
			clock-names = "xo", "alternate";
			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1";
			#freq-domain-cells = <1>;
			#clock-cells = <1>;
		};
	};

	thermal-zones {
		mapss0-thermal {
			thermal-sensors = <&tsens0 0>;

			trips {
				mapss0_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				mapss0_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				mapss0_crit: mapss-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu0-thermal {
			thermal-sensors = <&tsens0 1>;

			trips {
				cpu0_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu0_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu0_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu1-thermal {
			thermal-sensors = <&tsens0 2>;

			trips {
				cpu1_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu1_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu1_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu2-thermal {
			thermal-sensors = <&tsens0 3>;

			trips {
				cpu2_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu2_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu2_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu3-thermal {
			thermal-sensors = <&tsens0 4>;

			trips {
				cpu3_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu3_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu3_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu4-thermal {
			thermal-sensors = <&tsens0 5>;

			trips {
				cpu4_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu4_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu4_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu5-thermal {
			thermal-sensors = <&tsens0 6>;

			trips {
				cpu5_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu5_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu5_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cluster0-thermal {
			thermal-sensors = <&tsens0 7>;

			trips {
				cluster0_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cluster0_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cluster0_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cluster1-thermal {
			thermal-sensors = <&tsens0 8>;

			trips {
				cluster1_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cluster1_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cluster1_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu6-thermal {
			thermal-sensors = <&tsens0 9>;

			trips {
				cpu6_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu6_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu6_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu7-thermal {
			thermal-sensors = <&tsens0 10>;

			trips {
				cpu7_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu7_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu7_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu-unk0-thermal {
			thermal-sensors = <&tsens0 11>;

			trips {
				cpu_unk0_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu_unk0_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu_unk0_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu-unk1-thermal {
			thermal-sensors = <&tsens0 12>;

			trips {
				cpu_unk1_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu_unk1_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu_unk1_crit: cpu-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		gpuss0-thermal {
			thermal-sensors = <&tsens0 13>;

			trips {
				gpuss0_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				gpuss0_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				gpuss0_crit: gpu-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		gpuss1-thermal {
			thermal-sensors = <&tsens0 14>;

			trips {
				gpuss1_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				gpuss1_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				gpuss1_crit: gpu-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		mapss1-thermal {
			thermal-sensors = <&tsens1 0>;

			trips {
				mapss1_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				mapss1_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				mapss1_crit: mapss-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cwlan-thermal {
			thermal-sensors = <&tsens1 1>;

			trips {
				cwlan_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cwlan_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cwlan_crit: cwlan-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		audio-thermal {
			thermal-sensors = <&tsens1 2>;

			trips {
				audio_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				audio_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				audio_crit: audio-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		ddr-thermal {
			thermal-sensors = <&tsens1 3>;

			trips {
				ddr_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				ddr_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				ddr_crit: ddr-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		q6hvx-thermal {
			thermal-sensors = <&tsens1 4>;

			trips {
				q6hvx_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				q6hvx_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				q6hvx_crit: q6hvx-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		camera-thermal {
			thermal-sensors = <&tsens1 5>;

			trips {
				camera_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				camera_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				camera_crit: camera-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		mdm-core0-thermal {
			thermal-sensors = <&tsens1 6>;

			trips {
				mdm_core0_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				mdm_core0_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				mdm_core0_crit: mdm-core0-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		mdm-core1-thermal {
			thermal-sensors = <&tsens1 7>;

			trips {
				mdm_core1_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				mdm_core1_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				mdm_core1_crit: mdm-core1-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		mdm-vec-thermal {
			thermal-sensors = <&tsens1 8>;

			trips {
				mdm_vec_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				mdm_vec_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				mdm_vec_crit: mdm-vec-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		msm-scl-thermal {
			thermal-sensors = <&tsens1 9>;

			trips {
				msm_scl_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				msm_scl_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				msm_scl_crit: msm-scl-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		video-thermal {
			thermal-sensors = <&tsens1 10>;

			trips {
				video_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				video_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				video_crit: video-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
	};
};