1// SPDX-License-Identifier: GPL-2.0-only 2/** 3 * dts file for Hisilicon D02 Development Board 4 * 5 * Copyright (C) 2014,2015 Hisilicon Ltd. 6 */ 7 8/dts-v1/; 9 10#include <dt-bindings/gpio/gpio.h> 11#include "hip05.dtsi" 12 13/ { 14 model = "Hisilicon Hip05 D02 Development Board"; 15 compatible = "hisilicon,hip05-d02"; 16 17 memory@0 { 18 device_type = "memory"; 19 reg = <0x0 0x00000000 0x0 0x80000000>; 20 }; 21 22 aliases { 23 serial0 = &uart0; 24 }; 25 26 chosen { 27 stdout-path = "serial0:115200n8"; 28 }; 29 30 gpio_keys { 31 compatible = "gpio-keys"; 32 #address-cells = <1>; 33 #size-cells = <0>; 34 35 pwrbutton { 36 label = "Power Button"; 37 gpios = <&porta 8 GPIO_ACTIVE_LOW>; 38 linux,code = <116>; 39 debounce-interval = <0>; 40 }; 41 }; 42}; 43 44&uart0 { 45 status = "okay"; 46}; 47 48&peri_gpio0 { 49 status = "okay"; 50}; 51 52&lbc { 53 status = "okay"; 54 #address-cells = <2>; 55 #size-cells = <1>; 56 ranges = <0 0 0x0 0x90000000 0x08000000>, 57 <1 0 0x0 0x98000000 0x08000000>; 58 59 nor-flash@0,0 { 60 #address-cells = <1>; 61 #size-cells = <1>; 62 compatible = "numonyx,js28f00a", "cfi-flash"; 63 reg = <0 0x0 0x08000000>; 64 bank-width = <2>; 65 /* The three parts may not used */ 66 partition@0 { 67 label = "BIOS"; 68 reg = <0x0 0x300000>; 69 }; 70 partition@300000 { 71 label = "Linux"; 72 reg = <0x300000 0xa00000>; 73 }; 74 partition@1000000 { 75 label = "Rootfs"; 76 reg = <0x01000000 0x02000000>; 77 }; 78 }; 79 80 cpld@1,0 { 81 compatible = "hisilicon,hip05-cpld"; 82 reg = <1 0x0 0x100>; 83 }; 84}; 85