xref: /linux/scripts/dtc/include-prefixes/arm64/hisilicon/hi3660-hikey960.dts (revision e02045aa201d35c6892630dec11e6a6fe658c229)

/*
 * dts file for Hisilicon HiKey960 Development Board
 *
 * Copyright (C) 2016, Hisilicon Ltd.
 *
 */

/dts-v1/;

#include "hi3660.dtsi"
#include "hikey960-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>

/ {
	model = "HiKey960";
	compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";

	aliases {
		serial0 = &uart0;
		serial1 = &uart1;
		serial2 = &uart2;
		serial3 = &uart3;
		serial4 = &uart4;
		serial5 = &uart5;
		serial6 = &uart6;
	};

	chosen {
		stdout-path = "serial6:115200n8";
	};

	memory@0 {
		device_type = "memory";
		/* rewrite this at bootloader */
		reg = <0x0 0x0 0x0 0x0>;
	};

	keys {
		compatible = "gpio-keys";
		pinctrl-names = "default";
		pinctrl-0 = <&pwr_key_pmx_func &pwr_key_cfg_func>;

		power {
			wakeup-source;
			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
			label = "GPIO Power";
			linux,code = <KEY_POWER>;
		};
	};

	leds {
		compatible = "gpio-leds";

		user_led1 {
			label = "user_led1";
			/* gpio_150_user_led1 */
			gpios = <&gpio18 6 0>;
			linux,default-trigger = "heartbeat";
		};

		user_led2 {
			label = "user_led2";
			/* gpio_151_user_led2 */
			gpios = <&gpio18 7 0>;
			linux,default-trigger = "mmc0";
		};

		user_led3 {
			label = "user_led3";
			/* gpio_189_user_led3 */
			gpios = <&gpio23 5 0>;
			default-state = "off";
		};

		user_led4 {
			label = "user_led4";
			/* gpio_190_user_led4 */
			gpios = <&gpio23 6 0>;
			linux,default-trigger = "cpu0";
		};

		wlan_active_led {
			label = "wifi_active";
			/* gpio_205_wifi_active */
			gpios = <&gpio25 5 0>;
			linux,default-trigger = "phy0tx";
			default-state = "off";
		};

		bt_active_led {
			label = "bt_active";
			gpios = <&gpio25 7 0>;
			/* gpio_207_user_led1 */
			linux,default-trigger = "hci0-power";
			default-state = "off";
		};
	};

	pmic: pmic@fff34000 {
		compatible = "hisilicon,hi6421v530-pmic";
		reg = <0x0 0xfff34000 0x0 0x1000>;
		interrupt-controller;
		#interrupt-cells = <2>;

		regulators {
			ldo3: LDO3 { /* HDMI */
				regulator-name = "VOUT3_1V85";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <2200000>;
				regulator-enable-ramp-delay = <120>;
			};

			ldo9: LDO9 { /* SDCARD I/O */
				regulator-name = "VOUT9_1V8_2V95";
				regulator-min-microvolt = <1750000>;
				regulator-max-microvolt = <3300000>;
				regulator-enable-ramp-delay = <240>;
			};

			ldo11: LDO11 { /* Low Speed Connector */
				regulator-name = "VOUT11_1V8_2V95";
				regulator-min-microvolt = <1750000>;
				regulator-max-microvolt = <3300000>;
				regulator-enable-ramp-delay = <240>;
			};

			ldo15: LDO15 { /* UFS VCC */
				regulator-name = "VOUT15_3V0";
				regulator-min-microvolt = <1750000>;
				regulator-max-microvolt = <3000000>;
				regulator-boot-on;
				regulator-always-on;
				regulator-enable-ramp-delay = <120>;
			};

			ldo16: LDO16 { /* SD VDD */
				regulator-name = "VOUT16_2V95";
				regulator-min-microvolt = <1750000>;
				regulator-max-microvolt = <3000000>;
				regulator-enable-ramp-delay = <360>;
			};
		};
	};
};

&i2c0 {
	/* On Low speed expansion */
	label = "LS-I2C0";
	status = "okay";
};

&i2c1 {
	status = "okay";

	adv7533: adv7533@39 {
		status = "ok";
		compatible = "adi,adv7533";
		reg = <0x39>;
	};
};

&i2c7 {
	/* On Low speed expansion */
	label = "LS-I2C1";
	status = "okay";
};

&uart3 {
	/* On Low speed expansion */
	label = "LS-UART0";
	status = "okay";
};

&uart4 {
	status = "okay";

	bluetooth {
		compatible = "ti,wl1837-st";
		enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>;
		max-speed = <921600>;
	};
};

&uart6 {
	/* On Low speed expansion */
	label = "LS-UART1";
	status = "okay";
};

&spi2 {
	/* On Low speed expansion */
	label = "LS-SPI0";
	status = "okay";
};

&spi3 {
	/* On High speed expansion */
	label = "HS-SPI1";
	status = "okay";
};