xref: /linux/scripts/dtc/include-prefixes/arm/qcom/qcom-sdx65.dtsi (revision 9c39d5ab450f7181775957000f4aff33bfef9f7b)
1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * SDX65 SoC device tree source
4 *
5 * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
6 *
7 */
8
9#include <dt-bindings/clock/qcom,gcc-sdx65.h>
10#include <dt-bindings/clock/qcom,rpmh.h>
11#include <dt-bindings/gpio/gpio.h>
12#include <dt-bindings/interrupt-controller/arm-gic.h>
13#include <dt-bindings/power/qcom-rpmpd.h>
14#include <dt-bindings/soc/qcom,rpmh-rsc.h>
15#include <dt-bindings/interconnect/qcom,sdx65.h>
16
17/ {
18	#address-cells = <1>;
19	#size-cells = <1>;
20	qcom,msm-id = <458 0x10000>, <483 0x10000>, <509 0x10000>;
21	interrupt-parent = <&intc>;
22
23	memory {
24		device_type = "memory";
25		reg = <0 0>;
26	};
27
28	clocks {
29		xo_board: xo-board {
30			compatible = "fixed-clock";
31			clock-frequency = <76800000>;
32			clock-output-names = "xo_board";
33			#clock-cells = <0>;
34		};
35
36		sleep_clk: sleep-clk {
37			compatible = "fixed-clock";
38			clock-frequency = <32764>;
39			clock-output-names = "sleep_clk";
40			#clock-cells = <0>;
41		};
42
43		nand_clk_dummy: nand-clk-dummy {
44			compatible = "fixed-clock";
45			clock-frequency = <32764>;
46			#clock-cells = <0>;
47		};
48	};
49
50	cpus {
51		#address-cells = <1>;
52		#size-cells = <0>;
53
54		cpu0: cpu@0 {
55			device_type = "cpu";
56			compatible = "arm,cortex-a7";
57			reg = <0x0>;
58			enable-method = "psci";
59			clocks = <&apcs>;
60			power-domains = <&rpmhpd SDX65_CX_AO>;
61			power-domain-names = "rpmhpd";
62			operating-points-v2 = <&cpu_opp_table>;
63		};
64	};
65
66	firmware {
67		scm {
68			compatible = "qcom,scm-sdx65", "qcom,scm";
69		};
70	};
71
72	mc_virt: interconnect-mc-virt {
73		compatible = "qcom,sdx65-mc-virt";
74		#interconnect-cells = <1>;
75		qcom,bcm-voters = <&apps_bcm_voter>;
76	};
77
78	cpu_opp_table: opp-table-cpu {
79		compatible = "operating-points-v2";
80		opp-shared;
81
82		opp-345600000 {
83			opp-hz = /bits/ 64 <345600000>;
84			required-opps = <&rpmhpd_opp_low_svs>;
85		};
86
87		opp-576000000 {
88			opp-hz = /bits/ 64 <576000000>;
89			required-opps = <&rpmhpd_opp_svs>;
90		};
91
92		opp-1094400000 {
93			opp-hz = /bits/ 64 <1094400000>;
94			required-opps = <&rpmhpd_opp_nom>;
95		};
96
97		opp-1497600000 {
98			opp-hz = /bits/ 64 <1497600000>;
99			required-opps = <&rpmhpd_opp_turbo>;
100		};
101	};
102
103	psci {
104		compatible = "arm,psci-1.0";
105		method = "smc";
106	};
107
108	reserved_memory: reserved-memory {
109		#address-cells = <1>;
110		#size-cells = <1>;
111		ranges;
112
113		tz_heap_mem: memory@8fcad000 {
114			no-map;
115			reg = <0x8fcad000 0x40000>;
116		};
117
118		secdata_mem: memory@8fcfd000 {
119			no-map;
120			reg = <0x8fcfd000 0x1000>;
121		};
122
123		hyp_mem: memory@8fd00000 {
124			no-map;
125			reg = <0x8fd00000 0x80000>;
126		};
127
128		access_control_mem: memory@8fd80000 {
129			no-map;
130			reg = <0x8fd80000 0x80000>;
131		};
132
133		aop_mem: memory@8fe00000 {
134			no-map;
135			reg = <0x8fe00000 0x20000>;
136		};
137
138		smem_mem: memory@8fe20000 {
139			compatible = "qcom,smem";
140			reg = <0x8fe20000 0xc0000>;
141			hwlocks = <&tcsr_mutex 3>;
142			no-map;
143		};
144
145		cmd_db: reserved-memory@8fee0000 {
146			compatible = "qcom,cmd-db";
147			reg = <0x8fee0000 0x20000>;
148			no-map;
149		};
150
151		tz_mem: memory@8ff00000 {
152			no-map;
153			reg = <0x8ff00000 0x100000>;
154		};
155
156		tz_apps_mem: memory@90000000 {
157			no-map;
158			reg = <0x90000000 0x500000>;
159		};
160
161		llcc_tcm_mem: memory@15800000 {
162			no-map;
163			reg = <0x15800000 0x800000>;
164		};
165	};
166
167	smp2p-mpss {
168		compatible = "qcom,smp2p";
169		qcom,smem = <435>, <428>;
170		interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
171		mboxes = <&apcs 14>;
172		qcom,local-pid = <0>;
173		qcom,remote-pid = <1>;
174
175		modem_smp2p_out: master-kernel {
176			qcom,entry-name = "master-kernel";
177			#qcom,smem-state-cells = <1>;
178		};
179
180		modem_smp2p_in: slave-kernel {
181			qcom,entry-name = "slave-kernel";
182			interrupt-controller;
183			#interrupt-cells = <2>;
184		};
185
186		ipa_smp2p_out: ipa-ap-to-modem {
187			qcom,entry-name = "ipa";
188			#qcom,smem-state-cells = <1>;
189		};
190
191		ipa_smp2p_in: ipa-modem-to-ap {
192			qcom,entry-name = "ipa";
193			interrupt-controller;
194			#interrupt-cells = <2>;
195		};
196	};
197
198	soc: soc {
199		#address-cells = <1>;
200		#size-cells = <1>;
201		ranges;
202		compatible = "simple-bus";
203
204		gcc: clock-controller@100000 {
205			compatible = "qcom,gcc-sdx65";
206			reg = <0x00100000 0x001f7400>;
207			clocks = <&rpmhcc RPMH_CXO_CLK>,
208				 <&rpmhcc RPMH_CXO_CLK_A>,
209				 <&sleep_clk>,
210				 <&pcie_phy>,
211				 <0>;
212			clock-names = "bi_tcxo",
213				      "bi_tcxo_ao",
214				      "sleep_clk",
215				      "pcie_pipe_clk",
216				      "usb3_phy_wrapper_gcc_usb30_pipe_clk";
217			#power-domain-cells = <1>;
218			#clock-cells = <1>;
219			#reset-cells = <1>;
220		};
221
222		blsp1_uart3: serial@831000 {
223			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
224			reg = <0x00831000 0x200>;
225			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
226			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
227			clock-names = "core", "iface";
228			status = "disabled";
229		};
230
231		usb_hsphy: phy@ff4000 {
232			compatible = "qcom,sdx65-usb-hs-phy",
233				     "qcom,usb-snps-hs-7nm-phy";
234			reg = <0xff4000 0x120>;
235			#phy-cells = <0>;
236			clocks = <&rpmhcc RPMH_CXO_CLK>;
237			clock-names = "ref";
238			resets = <&gcc GCC_QUSB2PHY_BCR>;
239			status = "disabled";
240		};
241
242		usb_qmpphy: phy@ff6000 {
243			compatible = "qcom,sdx65-qmp-usb3-uni-phy";
244			reg = <0x00ff6000 0x2000>;
245
246			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
247				 <&gcc GCC_USB3_PRIM_CLKREF_EN>,
248				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
249				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
250			clock-names = "aux",
251				      "ref",
252				      "cfg_ahb",
253				      "pipe";
254			clock-output-names = "usb3_uni_phy_pipe_clk_src";
255			#clock-cells = <0>;
256			#phy-cells = <0>;
257
258			resets = <&gcc GCC_USB3_PHY_BCR>,
259				 <&gcc GCC_USB3PHY_PHY_BCR>;
260			reset-names = "phy",
261				      "phy_phy";
262
263			status = "disabled";
264
265		};
266
267		system_noc: interconnect@1620000 {
268			compatible = "qcom,sdx65-system-noc";
269			reg = <0x01620000 0x31200>;
270			#interconnect-cells = <1>;
271			qcom,bcm-voters = <&apps_bcm_voter>;
272		};
273
274		qpic_bam: dma-controller@1b04000 {
275			compatible = "qcom,bam-v1.7.0";
276			reg = <0x01b04000 0x1c000>;
277			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
278			clocks = <&rpmhcc RPMH_QPIC_CLK>;
279			clock-names = "bam_clk";
280			#dma-cells = <1>;
281			qcom,ee = <0>;
282			qcom,controlled-remotely;
283			status = "disabled";
284		};
285
286		qpic_nand: nand-controller@1b30000 {
287			compatible = "qcom,sdx55-nand";
288			reg = <0x01b30000 0x10000>;
289			#address-cells = <1>;
290			#size-cells = <0>;
291			clocks = <&rpmhcc RPMH_QPIC_CLK>,
292				 <&nand_clk_dummy>;
293			clock-names = "core", "aon";
294
295			dmas = <&qpic_bam 0>,
296			       <&qpic_bam 1>,
297			       <&qpic_bam 2>;
298			dma-names = "tx", "rx", "cmd";
299			status = "disabled";
300		};
301
302		pcie_ep: pcie-ep@1c00000 {
303			compatible = "qcom,sdx65-pcie-ep", "qcom,sdx55-pcie-ep";
304			reg = <0x01c00000 0x3000>,
305			      <0x40000000 0xf1d>,
306			      <0x40000f20 0xa8>,
307			      <0x40001000 0x1000>,
308			      <0x40200000 0x100000>,
309			      <0x01c03000 0x3000>;
310			reg-names = "parf",
311				    "dbi",
312				    "elbi",
313				    "atu",
314				    "addr_space",
315				    "mmio";
316
317			qcom,perst-regs = <&tcsr 0xb258 0xb270>;
318
319			clocks = <&gcc GCC_PCIE_AUX_CLK>,
320				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
321				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
322				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
323				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
324				 <&gcc GCC_PCIE_SLEEP_CLK>,
325				 <&gcc GCC_PCIE_0_CLKREF_EN>;
326			clock-names = "aux",
327				      "cfg",
328				      "bus_master",
329				      "bus_slave",
330				      "slave_q2a",
331				      "sleep",
332				      "ref";
333
334			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
335				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
336			interrupt-names = "global", "doorbell";
337
338			resets = <&gcc GCC_PCIE_BCR>;
339			reset-names = "core";
340
341			power-domains = <&gcc PCIE_GDSC>;
342
343			phys = <&pcie_phy>;
344			phy-names = "pciephy";
345
346			max-link-speed = <3>;
347			num-lanes = <2>;
348			linux,pci-domain = <0>;
349
350			status = "disabled";
351		};
352
353		pcie_phy: phy@1c06000 {
354			compatible = "qcom,sdx65-qmp-gen4x2-pcie-phy";
355			reg = <0x01c06000 0x2000>;
356
357			clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>,
358				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
359				 <&gcc GCC_PCIE_0_CLKREF_EN>,
360				 <&gcc GCC_PCIE_RCHNG_PHY_CLK>,
361				 <&gcc GCC_PCIE_PIPE_CLK>;
362			clock-names = "aux",
363				      "cfg_ahb",
364				      "ref",
365				      "rchng",
366				      "pipe";
367
368			resets = <&gcc GCC_PCIE_PHY_BCR>;
369			reset-names = "phy";
370
371			assigned-clocks = <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
372			assigned-clock-rates = <100000000>;
373
374			power-domains = <&gcc PCIE_GDSC>;
375
376			#clock-cells = <0>;
377			clock-output-names = "pcie_pipe_clk";
378
379			#phy-cells = <0>;
380
381			status = "disabled";
382		};
383
384		tcsr_mutex: hwlock@1f40000 {
385			compatible = "qcom,tcsr-mutex";
386			reg = <0x01f40000 0x40000>;
387			#hwlock-cells = <1>;
388		};
389
390		tcsr: syscon@1fcb000 {
391			compatible = "qcom,sdx65-tcsr", "syscon";
392			reg = <0x01fc0000 0x1000>;
393		};
394
395		ipa: ipa@3f40000 {
396			compatible = "qcom,sdx65-ipa";
397
398			reg = <0x03f40000 0x10000>,
399			      <0x03f50000 0x5000>,
400			      <0x03e04000 0xfc000>;
401			reg-names = "ipa-reg",
402				    "ipa-shared",
403				    "gsi";
404
405			interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
406					      <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
407					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
408					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
409			interrupt-names = "ipa",
410					  "gsi",
411					  "ipa-clock-query",
412					  "ipa-setup-ready";
413
414			iommus = <&apps_smmu 0x5e0 0x0>,
415				 <&apps_smmu 0x5e2 0x0>;
416
417			clocks = <&rpmhcc RPMH_IPA_CLK>;
418			clock-names = "core";
419
420			interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI1>,
421					<&mem_noc MASTER_APPSS_PROC &system_noc SLAVE_IPA_CFG>;
422			interconnect-names = "memory",
423					     "config";
424
425			qcom,smem-states = <&ipa_smp2p_out 0>,
426					   <&ipa_smp2p_out 1>;
427			qcom,smem-state-names = "ipa-clock-enabled-valid",
428						"ipa-clock-enabled";
429
430			status = "disabled";
431		};
432
433		remoteproc_mpss: remoteproc@4080000 {
434			compatible = "qcom,sdx55-mpss-pas";
435			reg = <0x04080000 0x4040>;
436
437			interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
438					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
439					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
440					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
441					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
442					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
443			interrupt-names = "wdog", "fatal", "ready", "handover",
444					  "stop-ack", "shutdown-ack";
445
446			clocks = <&rpmhcc RPMH_CXO_CLK>;
447			clock-names = "xo";
448
449			power-domains = <&rpmhpd SDX65_CX>,
450					<&rpmhpd SDX65_MSS>;
451			power-domain-names = "cx", "mss";
452
453			qcom,smem-states = <&modem_smp2p_out 0>;
454			qcom,smem-state-names = "stop";
455
456			status = "disabled";
457
458			glink-edge {
459				interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>;
460				label = "mpss";
461				qcom,remote-pid = <1>;
462				mboxes = <&apcs 15>;
463			};
464		};
465
466		sdhc_1: mmc@8804000 {
467			compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5";
468			reg = <0x08804000 0x1000>;
469			reg-names = "hc";
470			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
471				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
472			interrupt-names = "hc_irq", "pwr_irq";
473			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
474				 <&gcc GCC_SDCC1_APPS_CLK>;
475			clock-names = "iface", "core";
476			status = "disabled";
477		};
478
479		mem_noc: interconnect@9680000 {
480			compatible = "qcom,sdx65-mem-noc";
481			reg = <0x09680000 0x27200>;
482			#interconnect-cells = <1>;
483			qcom,bcm-voters = <&apps_bcm_voter>;
484		};
485
486		usb: usb@a6f8800 {
487			compatible = "qcom,sdx65-dwc3", "qcom,dwc3";
488			reg = <0x0a6f8800 0x400>;
489			#address-cells = <1>;
490			#size-cells = <1>;
491			ranges;
492
493			clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
494				 <&gcc GCC_USB30_MASTER_CLK>,
495				 <&gcc GCC_USB30_MSTR_AXI_CLK>,
496				 <&gcc GCC_USB30_SLEEP_CLK>,
497				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
498			clock-names = "cfg_noc", "core", "iface", "sleep",
499				      "mock_utmi";
500
501			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
502					  <&gcc GCC_USB30_MASTER_CLK>;
503			assigned-clock-rates = <19200000>, <200000000>;
504
505			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
506					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
507					      <&pdc 19 IRQ_TYPE_EDGE_BOTH>,
508					      <&pdc 18 IRQ_TYPE_EDGE_BOTH>,
509					      <&pdc 76 IRQ_TYPE_LEVEL_HIGH>;
510			interrupt-names = "pwr_event",
511					  "hs_phy_irq",
512					  "dp_hs_phy_irq",
513					  "dm_hs_phy_irq",
514					  "ss_phy_irq";
515
516			power-domains = <&gcc USB30_GDSC>;
517
518			resets = <&gcc GCC_USB30_BCR>;
519
520			status = "disabled";
521
522			usb_dwc3: usb@a600000 {
523				compatible = "snps,dwc3";
524				reg = <0x0a600000 0xcd00>;
525				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
526				iommus = <&apps_smmu 0x1a0 0x0>;
527				snps,dis_u2_susphy_quirk;
528				snps,dis_enblslpm_quirk;
529				phys = <&usb_hsphy>, <&usb_qmpphy>;
530				phy-names = "usb2-phy", "usb3-phy";
531			};
532		};
533
534		restart@c264000 {
535			compatible = "qcom,pshold";
536			reg = <0x0c264000 0x1000>;
537		};
538
539		spmi_bus: spmi@c440000 {
540			compatible = "qcom,spmi-pmic-arb";
541			reg = <0xc440000 0xd00>,
542				<0xc600000 0x2000000>,
543				<0xe600000 0x100000>,
544				<0xe700000 0xa0000>,
545				<0xc40a000 0x26000>;
546			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
547			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
548			interrupt-names = "periph_irq";
549			interrupt-controller;
550			#interrupt-cells = <4>;
551			#address-cells = <2>;
552			#size-cells = <0>;
553			qcom,channel = <0>;
554			qcom,ee = <0>;
555		};
556
557		tlmm: pinctrl@f100000 {
558			compatible = "qcom,sdx65-tlmm";
559			reg = <0xf100000 0x300000>;
560			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
561			gpio-controller;
562			#gpio-cells = <2>;
563			gpio-ranges = <&tlmm 0 0 109>;
564			interrupt-controller;
565			interrupt-parent = <&intc>;
566			#interrupt-cells = <2>;
567		};
568
569		pdc: interrupt-controller@b210000 {
570			compatible = "qcom,sdx65-pdc", "qcom,pdc";
571			reg = <0xb210000 0x10000>;
572			qcom,pdc-ranges = <0 147 52>, <52 266 32>;
573			#interrupt-cells = <2>;
574			interrupt-parent = <&intc>;
575			interrupt-controller;
576		};
577
578		sram@1468f000 {
579			compatible = "qcom,sdx65-imem", "syscon", "simple-mfd";
580			reg = <0x1468f000 0x1000>;
581			ranges = <0x0 0x1468f000 0x1000>;
582			#address-cells = <1>;
583			#size-cells = <1>;
584
585			pil-reloc@94c {
586				compatible = "qcom,pil-reloc-info";
587				reg = <0x94c 0xc8>;
588			};
589		};
590
591		apps_smmu: iommu@15000000 {
592			compatible = "qcom,sdx65-smmu-500", "qcom,smmu-500", "arm,mmu-500";
593			reg = <0x15000000 0x40000>;
594			#iommu-cells = <2>;
595			#global-interrupts = <1>;
596			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
597				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
598				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
599				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
600				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
601				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
602				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
603				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
604				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
605				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
606				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
607				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
608				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
609				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
610				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
611				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
612				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
613				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
614				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
615				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
616				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
617				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
618				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
619				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
620				     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
621				     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
622				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
623				     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
624				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
625				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
626				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
627				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
628				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
629		};
630
631		intc: interrupt-controller@17800000 {
632			compatible = "qcom,msm-qgic2";
633			interrupt-controller;
634			interrupt-parent = <&intc>;
635			#interrupt-cells = <3>;
636			reg = <0x17800000 0x1000>,
637			      <0x17802000 0x1000>;
638		};
639
640		a7pll: clock@17808000 {
641			compatible = "qcom,sdx55-a7pll";
642			reg = <0x17808000 0x1000>;
643			clocks = <&rpmhcc RPMH_CXO_CLK>;
644			clock-names = "bi_tcxo";
645			#clock-cells = <0>;
646		};
647
648		apcs: mailbox@17810000 {
649			compatible = "qcom,sdx55-apcs-gcc", "syscon";
650			reg = <0x17810000 0x2000>;
651			#mbox-cells = <1>;
652			clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>;
653			clock-names = "ref", "pll", "aux";
654			#clock-cells = <0>;
655		};
656
657		watchdog@17817000 {
658			compatible = "qcom,apss-wdt-sdx65", "qcom,kpss-wdt";
659			reg = <0x17817000 0x1000>;
660			clocks = <&sleep_clk>;
661		};
662
663		timer@17820000 {
664			#address-cells = <1>;
665			#size-cells = <1>;
666			ranges;
667			compatible = "arm,armv7-timer-mem";
668			reg = <0x17820000 0x1000>;
669			clock-frequency = <19200000>;
670
671			frame@17821000 {
672				frame-number = <0>;
673				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
674					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
675				reg = <0x17821000 0x1000>,
676				      <0x17822000 0x1000>;
677			};
678
679			frame@17823000 {
680				frame-number = <1>;
681				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
682				reg = <0x17823000 0x1000>;
683				status = "disabled";
684			};
685
686			frame@17824000 {
687				frame-number = <2>;
688				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
689				reg = <0x17824000 0x1000>;
690				status = "disabled";
691			};
692
693			frame@17825000 {
694				frame-number = <3>;
695				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
696				reg = <0x17825000 0x1000>;
697				status = "disabled";
698			};
699
700			frame@17826000 {
701				frame-number = <4>;
702				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
703				reg = <0x17826000 0x1000>;
704				status = "disabled";
705			};
706
707			frame@17827000 {
708				frame-number = <5>;
709				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
710				reg = <0x17827000 0x1000>;
711				status = "disabled";
712			};
713
714			frame@17828000 {
715				frame-number = <6>;
716				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
717				reg = <0x17828000 0x1000>;
718				status = "disabled";
719			};
720
721			frame@17829000 {
722				frame-number = <7>;
723				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
724				reg = <0x17829000 0x1000>;
725				status = "disabled";
726			};
727		};
728
729		apps_rsc: rsc@17830000 {
730			label = "apps_rsc";
731			compatible = "qcom,rpmh-rsc";
732			reg = <0x17830000 0x10000>,
733			    <0x17840000 0x10000>;
734			reg-names = "drv-0", "drv-1";
735			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
736				   <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
737			qcom,tcs-offset = <0xd00>;
738			qcom,drv-id = <1>;
739			qcom,tcs-config = <ACTIVE_TCS  2>,
740				<SLEEP_TCS   2>,
741				<WAKE_TCS    2>,
742				<CONTROL_TCS 1>;
743
744			rpmhcc: clock-controller {
745				compatible = "qcom,sdx65-rpmh-clk";
746				#clock-cells = <1>;
747				clock-names = "xo";
748				clocks = <&xo_board>;
749			};
750
751			rpmhpd: power-controller {
752				compatible = "qcom,sdx65-rpmhpd";
753				#power-domain-cells = <1>;
754				operating-points-v2 = <&rpmhpd_opp_table>;
755
756				rpmhpd_opp_table: opp-table {
757					compatible = "operating-points-v2";
758
759					rpmhpd_opp_ret: opp1 {
760						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
761					};
762
763					rpmhpd_opp_min_svs: opp2 {
764						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
765					};
766
767					rpmhpd_opp_low_svs: opp3 {
768						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
769					};
770
771					rpmhpd_opp_svs: opp4 {
772						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
773					};
774
775					rpmhpd_opp_svs_l1: opp5 {
776						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
777					};
778
779					rpmhpd_opp_nom: opp6 {
780						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
781					};
782
783					rpmhpd_opp_nom_l1: opp7 {
784						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
785					};
786
787					rpmhpd_opp_nom_l2: opp8 {
788						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
789					};
790
791					rpmhpd_opp_turbo: opp9 {
792						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
793					};
794
795					rpmhpd_opp_turbo_l1: opp10 {
796						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
797					};
798				};
799			};
800
801			apps_bcm_voter: bcm-voter {
802				compatible = "qcom,bcm-voter";
803			};
804
805		};
806	};
807
808	timer {
809		compatible = "arm,armv7-timer";
810		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
811			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
812			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
813			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
814		clock-frequency = <19200000>;
815	};
816};
817