xref: /linux/scripts/dtc/include-prefixes/arm/qcom/qcom-ipq4018-jalapeno.dts (revision 34069d12e239ae8f36dd96c378e4622fb1c42a76) 
1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2// Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
3
4#include "qcom-ipq4019.dtsi"
5#include <dt-bindings/gpio/gpio.h>
6#include <dt-bindings/input/input.h>
7
8/ {
9	model = "8devices Jalapeno";
10	compatible = "8dev,jalapeno", "qcom,ipq4018";
11};
12
13&tlmm {
14	mdio_pins: mdio_pinmux {
15		pinmux_1 {
16			pins = "gpio53";
17			function = "mdio";
18		};
19
20		pinmux_2 {
21			pins = "gpio52";
22			function = "mdc";
23		};
24
25		pinconf {
26			pins = "gpio52", "gpio53";
27			bias-pull-up;
28		};
29	};
30
31	serial_pins: serial_pinmux {
32		mux {
33			pins = "gpio60", "gpio61";
34			function = "blsp_uart0";
35			bias-disable;
36		};
37	};
38
39	spi_0_pins: spi_0_pinmux {
40		pin {
41			function = "blsp_spi0";
42			pins = "gpio55", "gpio56", "gpio57";
43			drive-strength = <2>;
44			bias-disable;
45		};
46
47		pin_cs {
48			function = "gpio";
49			pins = "gpio54", "gpio59";
50			drive-strength = <2>;
51			bias-disable;
52			output-high;
53		};
54	};
55};
56
57&watchdog {
58	status = "okay";
59};
60
61&prng {
62	status = "okay";
63};
64
65&blsp_dma {
66	status = "okay";
67};
68
69&blsp1_spi1 {
70	status = "okay";
71
72	pinctrl-0 = <&spi_0_pins>;
73	pinctrl-names = "default";
74	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
75
76	flash@0 {
77		status = "okay";
78
79		compatible = "jedec,spi-nor";
80		reg = <0>;
81		spi-max-frequency = <24000000>;
82
83		partitions {
84			compatible = "fixed-partitions";
85			#address-cells = <1>;
86			#size-cells = <1>;
87
88			partition@0 {
89				label = "SBL1";
90				reg = <0x00000000 0x00040000>;
91				read-only;
92			};
93
94			partition@40000 {
95				label = "MIBIB";
96				reg = <0x00040000 0x00020000>;
97				read-only;
98			};
99
100			partition@60000 {
101				label = "QSEE";
102				reg = <0x00060000 0x00060000>;
103				read-only;
104			};
105
106			partition@c0000 {
107				label = "CDT";
108				reg = <0x000c0000 0x00010000>;
109				read-only;
110			};
111
112			partition@d0000 {
113				label = "DDRPARAMS";
114				reg = <0x000d0000 0x00010000>;
115				read-only;
116			};
117
118			partition@e0000 {
119				label = "u-boot-env";
120				reg = <0x000e0000 0x00010000>;
121			};
122
123			partition@f0000 {
124				label = "u-boot";
125				reg = <0x000f0000 0x00080000>;
126				read-only;
127			};
128
129			partition@170000 {
130				label = "ART";
131				reg = <0x00170000 0x00010000>;
132				read-only;
133			};
134		};
135	};
136
137	spi-nand@1 {
138		status = "okay";
139
140		compatible = "spi-nand";
141		reg = <1>;
142		spi-max-frequency = <24000000>;
143
144		partitions {
145			compatible = "fixed-partitions";
146			#address-cells = <1>;
147			#size-cells = <1>;
148
149			partition@0 {
150				label = "ubi1";
151				reg = <0x00000000 0x04000000>;
152			};
153
154			partition@4000000 {
155				label = "ubi2";
156				reg = <0x04000000 0x04000000>;
157			};
158		};
159	};
160};
161
162&blsp1_uart1 {
163	status = "okay";
164
165	pinctrl-0 = <&serial_pins>;
166	pinctrl-names = "default";
167};
168
169&cryptobam {
170	status = "okay";
171};
172
173&crypto {
174	status = "okay";
175};
176
177&mdio {
178	status = "okay";
179
180	pinctrl-0 = <&mdio_pins>;
181	pinctrl-names = "default";
182};
183
184&wifi0 {
185	status = "okay";
186
187	qcom,ath10k-calibration-variant = "8devices-Jalapeno";
188};
189
190&wifi1 {
191	status = "okay";
192
193	qcom,ath10k-calibration-variant = "8devices-Jalapeno";
194};
195
196&usb3_ss_phy {
197	status = "okay";
198};
199
200&usb3_hs_phy {
201	status = "okay";
202};
203
204&usb3 {
205	status = "okay";
206};
207
208&usb2_hs_phy {
209	status = "okay";
210};
211
212&usb2 {
213	status = "okay";
214};
215