1*724ba675SRob Herring// SPDX-License-Identifier: GPL-2.0-or-later OR MIT 2*724ba675SRob Herring/* 3*724ba675SRob Herring * DTS for Emlid Neutis N5 Dev board. 4*724ba675SRob Herring * 5*724ba675SRob Herring * Copyright (C) 2019 Georgii Staroselskii <georgiii.staroselskii@emlid.com> 6*724ba675SRob Herring */ 7*724ba675SRob Herring 8*724ba675SRob Herring/dts-v1/; 9*724ba675SRob Herring 10*724ba675SRob Herring#include "sun8i-h3-emlid-neutis-n5h3.dtsi" 11*724ba675SRob Herring 12*724ba675SRob Herring/ { 13*724ba675SRob Herring model = "Emlid Neutis N5H3 Developer board"; 14*724ba675SRob Herring compatible = "emlid,neutis-n5h3-devboard", 15*724ba675SRob Herring "emlid,neutis-n5h3", 16*724ba675SRob Herring "allwinner,sun8i-h3"; 17*724ba675SRob Herring 18*724ba675SRob Herring vdd_cpux: gpio-regulator { 19*724ba675SRob Herring compatible = "regulator-gpio"; 20*724ba675SRob Herring regulator-name = "vdd-cpux"; 21*724ba675SRob Herring regulator-type = "voltage"; 22*724ba675SRob Herring regulator-boot-on; 23*724ba675SRob Herring regulator-always-on; 24*724ba675SRob Herring regulator-min-microvolt = <1100000>; 25*724ba675SRob Herring regulator-max-microvolt = <1300000>; 26*724ba675SRob Herring regulator-ramp-delay = <50>; /* 4ms */ 27*724ba675SRob Herring gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ 28*724ba675SRob Herring gpios-states = <0x1>; 29*724ba675SRob Herring states = <1100000 0x0>, <1300000 0x1>; 30*724ba675SRob Herring }; 31*724ba675SRob Herring 32*724ba675SRob Herring connector { 33*724ba675SRob Herring compatible = "hdmi-connector"; 34*724ba675SRob Herring type = "a"; 35*724ba675SRob Herring 36*724ba675SRob Herring port { 37*724ba675SRob Herring hdmi_con_in: endpoint { 38*724ba675SRob Herring remote-endpoint = <&hdmi_out_con>; 39*724ba675SRob Herring }; 40*724ba675SRob Herring }; 41*724ba675SRob Herring }; 42*724ba675SRob Herring 43*724ba675SRob Herring}; 44*724ba675SRob Herring 45*724ba675SRob Herring&cpu0 { 46*724ba675SRob Herring cpu-supply = <&vdd_cpux>; 47*724ba675SRob Herring}; 48*724ba675SRob Herring 49*724ba675SRob Herring&codec { 50*724ba675SRob Herring status = "okay"; 51*724ba675SRob Herring}; 52*724ba675SRob Herring 53*724ba675SRob Herring&emac { 54*724ba675SRob Herring phy-handle = <&int_mii_phy>; 55*724ba675SRob Herring phy-mode = "mii"; 56*724ba675SRob Herring allwinner,leds-active-low; 57*724ba675SRob Herring status = "okay"; 58*724ba675SRob Herring}; 59*724ba675SRob Herring 60*724ba675SRob Herring&hdmi { 61*724ba675SRob Herring status = "okay"; 62*724ba675SRob Herring}; 63*724ba675SRob Herring 64*724ba675SRob Herring&hdmi_out { 65*724ba675SRob Herring hdmi_out_con: endpoint { 66*724ba675SRob Herring remote-endpoint = <&hdmi_con_in>; 67*724ba675SRob Herring }; 68*724ba675SRob Herring}; 69*724ba675SRob Herring 70*724ba675SRob Herring&i2c1 { 71*724ba675SRob Herring status = "okay"; 72*724ba675SRob Herring}; 73