1# SPDX-License-Identifier: GPL-2.0 2#### 3# kbuild: Generic definitions 4 5# Convenient variables 6comma := , 7quote := " 8squote := ' 9empty := 10space := $(empty) $(empty) 11space_escape := _-_SPACE_-_ 12pound := \# 13define newline 14 15 16endef 17 18### 19# Comparison macros. 20# Usage: $(call test-lt, $(CONFIG_LLD_VERSION), 150000) 21# 22# Use $(intcmp ...) if supported. (Make >= 4.4) 23# Otherwise, fall back to the 'test' shell command. 24ifeq ($(intcmp 1,0,,,y),y) 25test-ge = $(intcmp $(strip $1)0, $(strip $2)0,,y,y) 26test-gt = $(intcmp $(strip $1)0, $(strip $2)0,,,y) 27else 28test-ge = $(shell test $(strip $1)0 -ge $(strip $2)0 && echo y) 29test-gt = $(shell test $(strip $1)0 -gt $(strip $2)0 && echo y) 30endif 31test-le = $(call test-ge, $2, $1) 32test-lt = $(call test-gt, $2, $1) 33 34### 35# Name of target with a '.' as filename prefix. foo/bar.o => foo/.bar.o 36dot-target = $(dir $@).$(notdir $@) 37 38### 39# Name of target with a '.tmp_' as filename prefix. foo/bar.o => foo/.tmp_bar.o 40tmp-target = $(dir $@).tmp_$(notdir $@) 41 42### 43# The temporary file to save gcc -MMD generated dependencies must not 44# contain a comma 45depfile = $(subst $(comma),_,$(dot-target).d) 46 47### 48# filename of target with directory and extension stripped 49basetarget = $(basename $(notdir $@)) 50 51### 52# real prerequisites without phony targets 53real-prereqs = $(filter-out $(PHONY), $^) 54 55### 56# Escape single quote for use in echo statements 57escsq = $(subst $(squote),'\$(squote)',$1) 58 59### 60# Quote a string to pass it to C files. foo => '"foo"' 61stringify = $(squote)$(quote)$1$(quote)$(squote) 62 63### 64# The path to Kbuild or Makefile. Kbuild has precedence over Makefile. 65kbuild-file = $(or $(wildcard $(src)/Kbuild),$(src)/Makefile) 66 67### 68# Read a file, replacing newlines with spaces 69# 70# Make 4.2 or later can read a file by using its builtin function. 71ifneq ($(filter-out 4.0 4.1, $(MAKE_VERSION)),) 72read-file = $(subst $(newline),$(space),$(file < $1)) 73else 74read-file = $(shell cat $1 2>/dev/null) 75endif 76 77### 78# Easy method for doing a status message 79 kecho := : 80 quiet_kecho := echo 81silent_kecho := : 82kecho := $($(quiet)kecho) 83 84### 85# filechk is used to check if the content of a generated file is updated. 86# Sample usage: 87# 88# filechk_sample = echo $(KERNELRELEASE) 89# version.h: FORCE 90# $(call filechk,sample) 91# 92# The rule defined shall write to stdout the content of the new file. 93# The existing file will be compared with the new one. 94# - If no file exist it is created 95# - If the content differ the new file is used 96# - If they are equal no change, and no timestamp update 97define filechk 98 $(check-FORCE) 99 $(Q)set -e; \ 100 mkdir -p $(dir $@); \ 101 trap "rm -f $(tmp-target)" EXIT; \ 102 { $(filechk_$(1)); } > $(tmp-target); \ 103 if [ ! -r $@ ] || ! cmp -s $@ $(tmp-target); then \ 104 $(kecho) ' UPD $@'; \ 105 mv -f $(tmp-target) $@; \ 106 fi 107endef 108 109### 110# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj= 111# Usage: 112# $(Q)$(MAKE) $(build)=dir 113build := -f $(srctree)/scripts/Makefile.build obj 114 115### 116# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj= 117# Usage: 118# $(Q)$(MAKE) $(clean)=dir 119clean := -f $(srctree)/scripts/Makefile.clean obj 120 121# pring log 122# 123# If quiet is "silent_", print nothing and sink stdout 124# If quiet is "quiet_", print short log 125# If quiet is empty, print short log and whole command 126silent_log_print = exec >/dev/null; 127 quiet_log_print = $(if $(quiet_cmd_$1), echo ' $(call escsq,$(quiet_cmd_$1)$(why))';) 128 log_print = echo '$(pound) $(call escsq,$(or $(quiet_cmd_$1),cmd_$1 $@)$(why))'; \ 129 echo ' $(call escsq,$(cmd_$1))'; 130 131# Delete the target on interruption 132# 133# GNU Make automatically deletes the target if it has already been changed by 134# the interrupted recipe. So, you can safely stop the build by Ctrl-C (Make 135# will delete incomplete targets), and resume it later. 136# 137# However, this does not work when the stderr is piped to another program, like 138# $ make >&2 | tee log 139# Make dies with SIGPIPE before cleaning the targets. 140# 141# To address it, we clean the target in signal traps. 142# 143# Make deletes the target when it catches SIGHUP, SIGINT, SIGQUIT, SIGTERM. 144# So, we cover them, and also SIGPIPE just in case. 145# 146# Of course, this is unneeded for phony targets. 147delete-on-interrupt = \ 148 $(if $(filter-out $(PHONY), $@), \ 149 $(foreach sig, HUP INT QUIT TERM PIPE, \ 150 trap 'rm -f $@; trap - $(sig); kill -s $(sig) $$$$' $(sig);)) 151 152# print and execute commands 153cmd = @$(if $(cmd_$(1)),set -e; $($(quiet)log_print) $(delete-on-interrupt) $(cmd_$(1)),:) 154 155### 156# if_changed - execute command if any prerequisite is newer than 157# target, or command line has changed 158# if_changed_dep - as if_changed, but uses fixdep to reveal dependencies 159# including used config symbols 160# if_changed_rule - as if_changed but execute rule instead 161# See Documentation/kbuild/makefiles.rst for more info 162 163ifneq ($(KBUILD_NOCMDDEP),1) 164# Check if both commands are the same including their order. Result is empty 165# string if equal. User may override this check using make KBUILD_NOCMDDEP=1 166# If the target does not exist, the *.cmd file should not be included so 167# $(savedcmd_$@) gets empty. Then, target will be built even if $(newer-prereqs) 168# happens to become empty. 169cmd-check = $(filter-out $(subst $(space),$(space_escape),$(strip $(savedcmd_$@))), \ 170 $(subst $(space),$(space_escape),$(strip $(cmd_$1)))) 171else 172# We still need to detect missing targets. 173cmd-check = $(if $(strip $(savedcmd_$@)),,1) 174endif 175 176# Replace >$< with >$$< to preserve $ when reloading the .cmd file 177# (needed for make) 178# Replace >#< with >$(pound)< to avoid starting a comment in the .cmd file 179# (needed for make) 180# Replace >'< with >'\''< to be able to enclose the whole string in '...' 181# (needed for the shell) 182make-cmd = $(call escsq,$(subst $(pound),$$(pound),$(subst $$,$$$$,$(cmd_$(1))))) 183 184# Find any prerequisites that are newer than target or that do not exist. 185# PHONY targets skipped in both cases. 186# If there is no prerequisite other than phony targets, $(newer-prereqs) becomes 187# empty even if the target does not exist. cmd-check saves this corner case. 188newer-prereqs = $(filter-out $(PHONY),$?) 189 190# It is a typical mistake to forget the FORCE prerequisite. Check it here so 191# no more breakage will slip in. 192check-FORCE = $(if $(filter FORCE, $^),,$(warning FORCE prerequisite is missing)) 193 194if-changed-cond = $(newer-prereqs)$(cmd-check)$(check-FORCE) 195 196# Execute command if command has changed or prerequisite(s) are updated. 197if_changed = $(if $(if-changed-cond),$(cmd_and_savecmd),@:) 198 199cmd_and_savecmd = \ 200 $(cmd); \ 201 printf '%s\n' 'savedcmd_$@ := $(make-cmd)' > $(dot-target).cmd 202 203# Execute the command and also postprocess generated .d dependencies file. 204if_changed_dep = $(if $(if-changed-cond),$(cmd_and_fixdep),@:) 205 206cmd_and_fixdep = \ 207 $(cmd); \ 208 scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).cmd;\ 209 rm -f $(depfile) 210 211# Usage: $(call if_changed_rule,foo) 212# Will check if $(cmd_foo) or any of the prerequisites changed, 213# and if so will execute $(rule_foo). 214if_changed_rule = $(if $(if-changed-cond),$(rule_$(1)),@:) 215 216### 217# why - tell why a target got built 218# enabled by make V=2 219# Output (listed in the order they are checked): 220# (1) - due to target is PHONY 221# (2) - due to target missing 222# (3) - due to: file1.h file2.h 223# (4) - due to command line change 224# (5) - due to missing .cmd file 225# (6) - due to target not in $(targets) 226# (1) PHONY targets are always build 227# (2) No target, so we better build it 228# (3) Prerequisite is newer than target 229# (4) The command line stored in the file named dir/.target.cmd 230# differed from actual command line. This happens when compiler 231# options changes 232# (5) No dir/.target.cmd file (used to store command line) 233# (6) No dir/.target.cmd file and target not listed in $(targets) 234# This is a good hint that there is a bug in the kbuild file 235ifneq ($(findstring 2, $(KBUILD_VERBOSE)),) 236_why = \ 237 $(if $(filter $@, $(PHONY)),- due to target is PHONY, \ 238 $(if $(wildcard $@), \ 239 $(if $(newer-prereqs),- due to: $(newer-prereqs), \ 240 $(if $(cmd-check), \ 241 $(if $(savedcmd_$@),- due to command line change, \ 242 $(if $(filter $@, $(targets)), \ 243 - due to missing .cmd file, \ 244 - due to $(notdir $@) not in $$(targets) \ 245 ) \ 246 ) \ 247 ) \ 248 ), \ 249 - due to target missing \ 250 ) \ 251 ) 252 253why = $(space)$(strip $(_why)) 254endif 255 256############################################################################### 257 258# delete partially updated (i.e. corrupted) files on error 259.DELETE_ON_ERROR: 260 261# do not delete intermediate files automatically 262# 263# .NOTINTERMEDIATE is more correct, but only available on newer Make versions. 264# Make 4.4 introduced .NOTINTERMEDIATE, and it appears in .FEATURES, but the 265# global .NOTINTERMEDIATE does not work. We can use it on Make > 4.4. 266# Use .SECONDARY for older Make versions, but "newer-prereq" cannot detect 267# deleted files. 268ifneq ($(and $(filter notintermediate, $(.FEATURES)),$(filter-out 4.4,$(MAKE_VERSION))),) 269.NOTINTERMEDIATE: 270else 271.SECONDARY: 272endif 273