xref: /linux/net/wireless/chan.c (revision a4eb44a6435d6d8f9e642407a4a06f65eb90ca04)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * This file contains helper code to handle channel
4  * settings and keeping track of what is possible at
5  * any point in time.
6  *
7  * Copyright 2009	Johannes Berg <johannes@sipsolutions.net>
8  * Copyright 2013-2014  Intel Mobile Communications GmbH
9  * Copyright 2018-2021	Intel Corporation
10  */
11 
12 #include <linux/export.h>
13 #include <linux/bitfield.h>
14 #include <net/cfg80211.h>
15 #include "core.h"
16 #include "rdev-ops.h"
17 
18 static bool cfg80211_valid_60g_freq(u32 freq)
19 {
20 	return freq >= 58320 && freq <= 70200;
21 }
22 
23 void cfg80211_chandef_create(struct cfg80211_chan_def *chandef,
24 			     struct ieee80211_channel *chan,
25 			     enum nl80211_channel_type chan_type)
26 {
27 	if (WARN_ON(!chan))
28 		return;
29 
30 	chandef->chan = chan;
31 	chandef->freq1_offset = chan->freq_offset;
32 	chandef->center_freq2 = 0;
33 	chandef->edmg.bw_config = 0;
34 	chandef->edmg.channels = 0;
35 
36 	switch (chan_type) {
37 	case NL80211_CHAN_NO_HT:
38 		chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
39 		chandef->center_freq1 = chan->center_freq;
40 		break;
41 	case NL80211_CHAN_HT20:
42 		chandef->width = NL80211_CHAN_WIDTH_20;
43 		chandef->center_freq1 = chan->center_freq;
44 		break;
45 	case NL80211_CHAN_HT40PLUS:
46 		chandef->width = NL80211_CHAN_WIDTH_40;
47 		chandef->center_freq1 = chan->center_freq + 10;
48 		break;
49 	case NL80211_CHAN_HT40MINUS:
50 		chandef->width = NL80211_CHAN_WIDTH_40;
51 		chandef->center_freq1 = chan->center_freq - 10;
52 		break;
53 	default:
54 		WARN_ON(1);
55 	}
56 }
57 EXPORT_SYMBOL(cfg80211_chandef_create);
58 
59 static bool cfg80211_edmg_chandef_valid(const struct cfg80211_chan_def *chandef)
60 {
61 	int max_contiguous = 0;
62 	int num_of_enabled = 0;
63 	int contiguous = 0;
64 	int i;
65 
66 	if (!chandef->edmg.channels || !chandef->edmg.bw_config)
67 		return false;
68 
69 	if (!cfg80211_valid_60g_freq(chandef->chan->center_freq))
70 		return false;
71 
72 	for (i = 0; i < 6; i++) {
73 		if (chandef->edmg.channels & BIT(i)) {
74 			contiguous++;
75 			num_of_enabled++;
76 		} else {
77 			contiguous = 0;
78 		}
79 
80 		max_contiguous = max(contiguous, max_contiguous);
81 	}
82 	/* basic verification of edmg configuration according to
83 	 * IEEE P802.11ay/D4.0 section 9.4.2.251
84 	 */
85 	/* check bw_config against contiguous edmg channels */
86 	switch (chandef->edmg.bw_config) {
87 	case IEEE80211_EDMG_BW_CONFIG_4:
88 	case IEEE80211_EDMG_BW_CONFIG_8:
89 	case IEEE80211_EDMG_BW_CONFIG_12:
90 		if (max_contiguous < 1)
91 			return false;
92 		break;
93 	case IEEE80211_EDMG_BW_CONFIG_5:
94 	case IEEE80211_EDMG_BW_CONFIG_9:
95 	case IEEE80211_EDMG_BW_CONFIG_13:
96 		if (max_contiguous < 2)
97 			return false;
98 		break;
99 	case IEEE80211_EDMG_BW_CONFIG_6:
100 	case IEEE80211_EDMG_BW_CONFIG_10:
101 	case IEEE80211_EDMG_BW_CONFIG_14:
102 		if (max_contiguous < 3)
103 			return false;
104 		break;
105 	case IEEE80211_EDMG_BW_CONFIG_7:
106 	case IEEE80211_EDMG_BW_CONFIG_11:
107 	case IEEE80211_EDMG_BW_CONFIG_15:
108 		if (max_contiguous < 4)
109 			return false;
110 		break;
111 
112 	default:
113 		return false;
114 	}
115 
116 	/* check bw_config against aggregated (non contiguous) edmg channels */
117 	switch (chandef->edmg.bw_config) {
118 	case IEEE80211_EDMG_BW_CONFIG_4:
119 	case IEEE80211_EDMG_BW_CONFIG_5:
120 	case IEEE80211_EDMG_BW_CONFIG_6:
121 	case IEEE80211_EDMG_BW_CONFIG_7:
122 		break;
123 	case IEEE80211_EDMG_BW_CONFIG_8:
124 	case IEEE80211_EDMG_BW_CONFIG_9:
125 	case IEEE80211_EDMG_BW_CONFIG_10:
126 	case IEEE80211_EDMG_BW_CONFIG_11:
127 		if (num_of_enabled < 2)
128 			return false;
129 		break;
130 	case IEEE80211_EDMG_BW_CONFIG_12:
131 	case IEEE80211_EDMG_BW_CONFIG_13:
132 	case IEEE80211_EDMG_BW_CONFIG_14:
133 	case IEEE80211_EDMG_BW_CONFIG_15:
134 		if (num_of_enabled < 4 || max_contiguous < 2)
135 			return false;
136 		break;
137 	default:
138 		return false;
139 	}
140 
141 	return true;
142 }
143 
144 static int nl80211_chan_width_to_mhz(enum nl80211_chan_width chan_width)
145 {
146 	int mhz;
147 
148 	switch (chan_width) {
149 	case NL80211_CHAN_WIDTH_1:
150 		mhz = 1;
151 		break;
152 	case NL80211_CHAN_WIDTH_2:
153 		mhz = 2;
154 		break;
155 	case NL80211_CHAN_WIDTH_4:
156 		mhz = 4;
157 		break;
158 	case NL80211_CHAN_WIDTH_8:
159 		mhz = 8;
160 		break;
161 	case NL80211_CHAN_WIDTH_16:
162 		mhz = 16;
163 		break;
164 	case NL80211_CHAN_WIDTH_5:
165 		mhz = 5;
166 		break;
167 	case NL80211_CHAN_WIDTH_10:
168 		mhz = 10;
169 		break;
170 	case NL80211_CHAN_WIDTH_20:
171 	case NL80211_CHAN_WIDTH_20_NOHT:
172 		mhz = 20;
173 		break;
174 	case NL80211_CHAN_WIDTH_40:
175 		mhz = 40;
176 		break;
177 	case NL80211_CHAN_WIDTH_80P80:
178 	case NL80211_CHAN_WIDTH_80:
179 		mhz = 80;
180 		break;
181 	case NL80211_CHAN_WIDTH_160:
182 		mhz = 160;
183 		break;
184 	default:
185 		WARN_ON_ONCE(1);
186 		return -1;
187 	}
188 	return mhz;
189 }
190 
191 static int cfg80211_chandef_get_width(const struct cfg80211_chan_def *c)
192 {
193 	return nl80211_chan_width_to_mhz(c->width);
194 }
195 
196 bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef)
197 {
198 	u32 control_freq, oper_freq;
199 	int oper_width, control_width;
200 
201 	if (!chandef->chan)
202 		return false;
203 
204 	if (chandef->freq1_offset >= 1000)
205 		return false;
206 
207 	control_freq = chandef->chan->center_freq;
208 
209 	switch (chandef->width) {
210 	case NL80211_CHAN_WIDTH_5:
211 	case NL80211_CHAN_WIDTH_10:
212 	case NL80211_CHAN_WIDTH_20:
213 	case NL80211_CHAN_WIDTH_20_NOHT:
214 		if (ieee80211_chandef_to_khz(chandef) !=
215 		    ieee80211_channel_to_khz(chandef->chan))
216 			return false;
217 		if (chandef->center_freq2)
218 			return false;
219 		break;
220 	case NL80211_CHAN_WIDTH_1:
221 	case NL80211_CHAN_WIDTH_2:
222 	case NL80211_CHAN_WIDTH_4:
223 	case NL80211_CHAN_WIDTH_8:
224 	case NL80211_CHAN_WIDTH_16:
225 		if (chandef->chan->band != NL80211_BAND_S1GHZ)
226 			return false;
227 
228 		control_freq = ieee80211_channel_to_khz(chandef->chan);
229 		oper_freq = ieee80211_chandef_to_khz(chandef);
230 		control_width = nl80211_chan_width_to_mhz(
231 					ieee80211_s1g_channel_width(
232 								chandef->chan));
233 		oper_width = cfg80211_chandef_get_width(chandef);
234 
235 		if (oper_width < 0 || control_width < 0)
236 			return false;
237 		if (chandef->center_freq2)
238 			return false;
239 
240 		if (control_freq + MHZ_TO_KHZ(control_width) / 2 >
241 		    oper_freq + MHZ_TO_KHZ(oper_width) / 2)
242 			return false;
243 
244 		if (control_freq - MHZ_TO_KHZ(control_width) / 2 <
245 		    oper_freq - MHZ_TO_KHZ(oper_width) / 2)
246 			return false;
247 		break;
248 	case NL80211_CHAN_WIDTH_80P80:
249 		if (!chandef->center_freq2)
250 			return false;
251 		/* adjacent is not allowed -- that's a 160 MHz channel */
252 		if (chandef->center_freq1 - chandef->center_freq2 == 80 ||
253 		    chandef->center_freq2 - chandef->center_freq1 == 80)
254 			return false;
255 		break;
256 	default:
257 		if (chandef->center_freq2)
258 			return false;
259 		break;
260 	}
261 
262 	switch (chandef->width) {
263 	case NL80211_CHAN_WIDTH_5:
264 	case NL80211_CHAN_WIDTH_10:
265 	case NL80211_CHAN_WIDTH_20:
266 	case NL80211_CHAN_WIDTH_20_NOHT:
267 	case NL80211_CHAN_WIDTH_1:
268 	case NL80211_CHAN_WIDTH_2:
269 	case NL80211_CHAN_WIDTH_4:
270 	case NL80211_CHAN_WIDTH_8:
271 	case NL80211_CHAN_WIDTH_16:
272 		/* all checked above */
273 		break;
274 	case NL80211_CHAN_WIDTH_160:
275 		if (chandef->center_freq1 == control_freq + 70 ||
276 		    chandef->center_freq1 == control_freq + 50 ||
277 		    chandef->center_freq1 == control_freq - 50 ||
278 		    chandef->center_freq1 == control_freq - 70)
279 			break;
280 		fallthrough;
281 	case NL80211_CHAN_WIDTH_80P80:
282 	case NL80211_CHAN_WIDTH_80:
283 		if (chandef->center_freq1 == control_freq + 30 ||
284 		    chandef->center_freq1 == control_freq - 30)
285 			break;
286 		fallthrough;
287 	case NL80211_CHAN_WIDTH_40:
288 		if (chandef->center_freq1 == control_freq + 10 ||
289 		    chandef->center_freq1 == control_freq - 10)
290 			break;
291 		fallthrough;
292 	default:
293 		return false;
294 	}
295 
296 	/* channel 14 is only for IEEE 802.11b */
297 	if (chandef->center_freq1 == 2484 &&
298 	    chandef->width != NL80211_CHAN_WIDTH_20_NOHT)
299 		return false;
300 
301 	if (cfg80211_chandef_is_edmg(chandef) &&
302 	    !cfg80211_edmg_chandef_valid(chandef))
303 		return false;
304 
305 	return true;
306 }
307 EXPORT_SYMBOL(cfg80211_chandef_valid);
308 
309 static void chandef_primary_freqs(const struct cfg80211_chan_def *c,
310 				  u32 *pri40, u32 *pri80)
311 {
312 	int tmp;
313 
314 	switch (c->width) {
315 	case NL80211_CHAN_WIDTH_40:
316 		*pri40 = c->center_freq1;
317 		*pri80 = 0;
318 		break;
319 	case NL80211_CHAN_WIDTH_80:
320 	case NL80211_CHAN_WIDTH_80P80:
321 		*pri80 = c->center_freq1;
322 		/* n_P20 */
323 		tmp = (30 + c->chan->center_freq - c->center_freq1)/20;
324 		/* n_P40 */
325 		tmp /= 2;
326 		/* freq_P40 */
327 		*pri40 = c->center_freq1 - 20 + 40 * tmp;
328 		break;
329 	case NL80211_CHAN_WIDTH_160:
330 		/* n_P20 */
331 		tmp = (70 + c->chan->center_freq - c->center_freq1)/20;
332 		/* n_P40 */
333 		tmp /= 2;
334 		/* freq_P40 */
335 		*pri40 = c->center_freq1 - 60 + 40 * tmp;
336 		/* n_P80 */
337 		tmp /= 2;
338 		*pri80 = c->center_freq1 - 40 + 80 * tmp;
339 		break;
340 	default:
341 		WARN_ON_ONCE(1);
342 	}
343 }
344 
345 const struct cfg80211_chan_def *
346 cfg80211_chandef_compatible(const struct cfg80211_chan_def *c1,
347 			    const struct cfg80211_chan_def *c2)
348 {
349 	u32 c1_pri40, c1_pri80, c2_pri40, c2_pri80;
350 
351 	/* If they are identical, return */
352 	if (cfg80211_chandef_identical(c1, c2))
353 		return c1;
354 
355 	/* otherwise, must have same control channel */
356 	if (c1->chan != c2->chan)
357 		return NULL;
358 
359 	/*
360 	 * If they have the same width, but aren't identical,
361 	 * then they can't be compatible.
362 	 */
363 	if (c1->width == c2->width)
364 		return NULL;
365 
366 	/*
367 	 * can't be compatible if one of them is 5 or 10 MHz,
368 	 * but they don't have the same width.
369 	 */
370 	if (c1->width == NL80211_CHAN_WIDTH_5 ||
371 	    c1->width == NL80211_CHAN_WIDTH_10 ||
372 	    c2->width == NL80211_CHAN_WIDTH_5 ||
373 	    c2->width == NL80211_CHAN_WIDTH_10)
374 		return NULL;
375 
376 	if (c1->width == NL80211_CHAN_WIDTH_20_NOHT ||
377 	    c1->width == NL80211_CHAN_WIDTH_20)
378 		return c2;
379 
380 	if (c2->width == NL80211_CHAN_WIDTH_20_NOHT ||
381 	    c2->width == NL80211_CHAN_WIDTH_20)
382 		return c1;
383 
384 	chandef_primary_freqs(c1, &c1_pri40, &c1_pri80);
385 	chandef_primary_freqs(c2, &c2_pri40, &c2_pri80);
386 
387 	if (c1_pri40 != c2_pri40)
388 		return NULL;
389 
390 	WARN_ON(!c1_pri80 && !c2_pri80);
391 	if (c1_pri80 && c2_pri80 && c1_pri80 != c2_pri80)
392 		return NULL;
393 
394 	if (c1->width > c2->width)
395 		return c1;
396 	return c2;
397 }
398 EXPORT_SYMBOL(cfg80211_chandef_compatible);
399 
400 static void cfg80211_set_chans_dfs_state(struct wiphy *wiphy, u32 center_freq,
401 					 u32 bandwidth,
402 					 enum nl80211_dfs_state dfs_state)
403 {
404 	struct ieee80211_channel *c;
405 	u32 freq;
406 
407 	for (freq = center_freq - bandwidth/2 + 10;
408 	     freq <= center_freq + bandwidth/2 - 10;
409 	     freq += 20) {
410 		c = ieee80211_get_channel(wiphy, freq);
411 		if (!c || !(c->flags & IEEE80211_CHAN_RADAR))
412 			continue;
413 
414 		c->dfs_state = dfs_state;
415 		c->dfs_state_entered = jiffies;
416 	}
417 }
418 
419 void cfg80211_set_dfs_state(struct wiphy *wiphy,
420 			    const struct cfg80211_chan_def *chandef,
421 			    enum nl80211_dfs_state dfs_state)
422 {
423 	int width;
424 
425 	if (WARN_ON(!cfg80211_chandef_valid(chandef)))
426 		return;
427 
428 	width = cfg80211_chandef_get_width(chandef);
429 	if (width < 0)
430 		return;
431 
432 	cfg80211_set_chans_dfs_state(wiphy, chandef->center_freq1,
433 				     width, dfs_state);
434 
435 	if (!chandef->center_freq2)
436 		return;
437 	cfg80211_set_chans_dfs_state(wiphy, chandef->center_freq2,
438 				     width, dfs_state);
439 }
440 
441 static u32 cfg80211_get_start_freq(u32 center_freq,
442 				   u32 bandwidth)
443 {
444 	u32 start_freq;
445 
446 	bandwidth = MHZ_TO_KHZ(bandwidth);
447 	if (bandwidth <= MHZ_TO_KHZ(20))
448 		start_freq = center_freq;
449 	else
450 		start_freq = center_freq - bandwidth / 2 + MHZ_TO_KHZ(10);
451 
452 	return start_freq;
453 }
454 
455 static u32 cfg80211_get_end_freq(u32 center_freq,
456 				 u32 bandwidth)
457 {
458 	u32 end_freq;
459 
460 	bandwidth = MHZ_TO_KHZ(bandwidth);
461 	if (bandwidth <= MHZ_TO_KHZ(20))
462 		end_freq = center_freq;
463 	else
464 		end_freq = center_freq + bandwidth / 2 - MHZ_TO_KHZ(10);
465 
466 	return end_freq;
467 }
468 
469 static int cfg80211_get_chans_dfs_required(struct wiphy *wiphy,
470 					    u32 center_freq,
471 					    u32 bandwidth)
472 {
473 	struct ieee80211_channel *c;
474 	u32 freq, start_freq, end_freq;
475 
476 	start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
477 	end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
478 
479 	for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
480 		c = ieee80211_get_channel_khz(wiphy, freq);
481 		if (!c)
482 			return -EINVAL;
483 
484 		if (c->flags & IEEE80211_CHAN_RADAR)
485 			return 1;
486 	}
487 	return 0;
488 }
489 
490 
491 int cfg80211_chandef_dfs_required(struct wiphy *wiphy,
492 				  const struct cfg80211_chan_def *chandef,
493 				  enum nl80211_iftype iftype)
494 {
495 	int width;
496 	int ret;
497 
498 	if (WARN_ON(!cfg80211_chandef_valid(chandef)))
499 		return -EINVAL;
500 
501 	switch (iftype) {
502 	case NL80211_IFTYPE_ADHOC:
503 	case NL80211_IFTYPE_AP:
504 	case NL80211_IFTYPE_P2P_GO:
505 	case NL80211_IFTYPE_MESH_POINT:
506 		width = cfg80211_chandef_get_width(chandef);
507 		if (width < 0)
508 			return -EINVAL;
509 
510 		ret = cfg80211_get_chans_dfs_required(wiphy,
511 					ieee80211_chandef_to_khz(chandef),
512 					width);
513 		if (ret < 0)
514 			return ret;
515 		else if (ret > 0)
516 			return BIT(chandef->width);
517 
518 		if (!chandef->center_freq2)
519 			return 0;
520 
521 		ret = cfg80211_get_chans_dfs_required(wiphy,
522 					MHZ_TO_KHZ(chandef->center_freq2),
523 					width);
524 		if (ret < 0)
525 			return ret;
526 		else if (ret > 0)
527 			return BIT(chandef->width);
528 
529 		break;
530 	case NL80211_IFTYPE_STATION:
531 	case NL80211_IFTYPE_OCB:
532 	case NL80211_IFTYPE_P2P_CLIENT:
533 	case NL80211_IFTYPE_MONITOR:
534 	case NL80211_IFTYPE_AP_VLAN:
535 	case NL80211_IFTYPE_P2P_DEVICE:
536 	case NL80211_IFTYPE_NAN:
537 		break;
538 	case NL80211_IFTYPE_WDS:
539 	case NL80211_IFTYPE_UNSPECIFIED:
540 	case NUM_NL80211_IFTYPES:
541 		WARN_ON(1);
542 	}
543 
544 	return 0;
545 }
546 EXPORT_SYMBOL(cfg80211_chandef_dfs_required);
547 
548 static int cfg80211_get_chans_dfs_usable(struct wiphy *wiphy,
549 					 u32 center_freq,
550 					 u32 bandwidth)
551 {
552 	struct ieee80211_channel *c;
553 	u32 freq, start_freq, end_freq;
554 	int count = 0;
555 
556 	start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
557 	end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
558 
559 	/*
560 	 * Check entire range of channels for the bandwidth.
561 	 * Check all channels are DFS channels (DFS_USABLE or
562 	 * DFS_AVAILABLE). Return number of usable channels
563 	 * (require CAC). Allow DFS and non-DFS channel mix.
564 	 */
565 	for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
566 		c = ieee80211_get_channel_khz(wiphy, freq);
567 		if (!c)
568 			return -EINVAL;
569 
570 		if (c->flags & IEEE80211_CHAN_DISABLED)
571 			return -EINVAL;
572 
573 		if (c->flags & IEEE80211_CHAN_RADAR) {
574 			if (c->dfs_state == NL80211_DFS_UNAVAILABLE)
575 				return -EINVAL;
576 
577 			if (c->dfs_state == NL80211_DFS_USABLE)
578 				count++;
579 		}
580 	}
581 
582 	return count;
583 }
584 
585 bool cfg80211_chandef_dfs_usable(struct wiphy *wiphy,
586 				 const struct cfg80211_chan_def *chandef)
587 {
588 	int width;
589 	int r1, r2 = 0;
590 
591 	if (WARN_ON(!cfg80211_chandef_valid(chandef)))
592 		return false;
593 
594 	width = cfg80211_chandef_get_width(chandef);
595 	if (width < 0)
596 		return false;
597 
598 	r1 = cfg80211_get_chans_dfs_usable(wiphy,
599 					   MHZ_TO_KHZ(chandef->center_freq1),
600 					   width);
601 
602 	if (r1 < 0)
603 		return false;
604 
605 	switch (chandef->width) {
606 	case NL80211_CHAN_WIDTH_80P80:
607 		WARN_ON(!chandef->center_freq2);
608 		r2 = cfg80211_get_chans_dfs_usable(wiphy,
609 					MHZ_TO_KHZ(chandef->center_freq2),
610 					width);
611 		if (r2 < 0)
612 			return false;
613 		break;
614 	default:
615 		WARN_ON(chandef->center_freq2);
616 		break;
617 	}
618 
619 	return (r1 + r2 > 0);
620 }
621 
622 /*
623  * Checks if center frequency of chan falls with in the bandwidth
624  * range of chandef.
625  */
626 bool cfg80211_is_sub_chan(struct cfg80211_chan_def *chandef,
627 			  struct ieee80211_channel *chan)
628 {
629 	int width;
630 	u32 freq;
631 
632 	if (chandef->chan->center_freq == chan->center_freq)
633 		return true;
634 
635 	width = cfg80211_chandef_get_width(chandef);
636 	if (width <= 20)
637 		return false;
638 
639 	for (freq = chandef->center_freq1 - width / 2 + 10;
640 	     freq <= chandef->center_freq1 + width / 2 - 10; freq += 20) {
641 		if (chan->center_freq == freq)
642 			return true;
643 	}
644 
645 	if (!chandef->center_freq2)
646 		return false;
647 
648 	for (freq = chandef->center_freq2 - width / 2 + 10;
649 	     freq <= chandef->center_freq2 + width / 2 - 10; freq += 20) {
650 		if (chan->center_freq == freq)
651 			return true;
652 	}
653 
654 	return false;
655 }
656 
657 bool cfg80211_beaconing_iface_active(struct wireless_dev *wdev)
658 {
659 	bool active = false;
660 
661 	ASSERT_WDEV_LOCK(wdev);
662 
663 	if (!wdev->chandef.chan)
664 		return false;
665 
666 	switch (wdev->iftype) {
667 	case NL80211_IFTYPE_AP:
668 	case NL80211_IFTYPE_P2P_GO:
669 		active = wdev->beacon_interval != 0;
670 		break;
671 	case NL80211_IFTYPE_ADHOC:
672 		active = wdev->ssid_len != 0;
673 		break;
674 	case NL80211_IFTYPE_MESH_POINT:
675 		active = wdev->mesh_id_len != 0;
676 		break;
677 	case NL80211_IFTYPE_STATION:
678 	case NL80211_IFTYPE_OCB:
679 	case NL80211_IFTYPE_P2P_CLIENT:
680 	case NL80211_IFTYPE_MONITOR:
681 	case NL80211_IFTYPE_AP_VLAN:
682 	case NL80211_IFTYPE_P2P_DEVICE:
683 	/* Can NAN type be considered as beaconing interface? */
684 	case NL80211_IFTYPE_NAN:
685 		break;
686 	case NL80211_IFTYPE_UNSPECIFIED:
687 	case NL80211_IFTYPE_WDS:
688 	case NUM_NL80211_IFTYPES:
689 		WARN_ON(1);
690 	}
691 
692 	return active;
693 }
694 
695 static bool cfg80211_is_wiphy_oper_chan(struct wiphy *wiphy,
696 					struct ieee80211_channel *chan)
697 {
698 	struct wireless_dev *wdev;
699 
700 	list_for_each_entry(wdev, &wiphy->wdev_list, list) {
701 		wdev_lock(wdev);
702 		if (!cfg80211_beaconing_iface_active(wdev)) {
703 			wdev_unlock(wdev);
704 			continue;
705 		}
706 
707 		if (cfg80211_is_sub_chan(&wdev->chandef, chan)) {
708 			wdev_unlock(wdev);
709 			return true;
710 		}
711 		wdev_unlock(wdev);
712 	}
713 
714 	return false;
715 }
716 
717 static bool
718 cfg80211_offchan_chain_is_active(struct cfg80211_registered_device *rdev,
719 				 struct ieee80211_channel *channel)
720 {
721 	if (!rdev->background_radar_wdev)
722 		return false;
723 
724 	if (!cfg80211_chandef_valid(&rdev->background_radar_chandef))
725 		return false;
726 
727 	return cfg80211_is_sub_chan(&rdev->background_radar_chandef, channel);
728 }
729 
730 bool cfg80211_any_wiphy_oper_chan(struct wiphy *wiphy,
731 				  struct ieee80211_channel *chan)
732 {
733 	struct cfg80211_registered_device *rdev;
734 
735 	ASSERT_RTNL();
736 
737 	if (!(chan->flags & IEEE80211_CHAN_RADAR))
738 		return false;
739 
740 	list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
741 		if (!reg_dfs_domain_same(wiphy, &rdev->wiphy))
742 			continue;
743 
744 		if (cfg80211_is_wiphy_oper_chan(&rdev->wiphy, chan))
745 			return true;
746 
747 		if (cfg80211_offchan_chain_is_active(rdev, chan))
748 			return true;
749 	}
750 
751 	return false;
752 }
753 
754 static bool cfg80211_get_chans_dfs_available(struct wiphy *wiphy,
755 					     u32 center_freq,
756 					     u32 bandwidth)
757 {
758 	struct ieee80211_channel *c;
759 	u32 freq, start_freq, end_freq;
760 	bool dfs_offload;
761 
762 	dfs_offload = wiphy_ext_feature_isset(wiphy,
763 					      NL80211_EXT_FEATURE_DFS_OFFLOAD);
764 
765 	start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
766 	end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
767 
768 	/*
769 	 * Check entire range of channels for the bandwidth.
770 	 * If any channel in between is disabled or has not
771 	 * had gone through CAC return false
772 	 */
773 	for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
774 		c = ieee80211_get_channel_khz(wiphy, freq);
775 		if (!c)
776 			return false;
777 
778 		if (c->flags & IEEE80211_CHAN_DISABLED)
779 			return false;
780 
781 		if ((c->flags & IEEE80211_CHAN_RADAR) &&
782 		    (c->dfs_state != NL80211_DFS_AVAILABLE) &&
783 		    !(c->dfs_state == NL80211_DFS_USABLE && dfs_offload))
784 			return false;
785 	}
786 
787 	return true;
788 }
789 
790 static bool cfg80211_chandef_dfs_available(struct wiphy *wiphy,
791 				const struct cfg80211_chan_def *chandef)
792 {
793 	int width;
794 	int r;
795 
796 	if (WARN_ON(!cfg80211_chandef_valid(chandef)))
797 		return false;
798 
799 	width = cfg80211_chandef_get_width(chandef);
800 	if (width < 0)
801 		return false;
802 
803 	r = cfg80211_get_chans_dfs_available(wiphy,
804 					     MHZ_TO_KHZ(chandef->center_freq1),
805 					     width);
806 
807 	/* If any of channels unavailable for cf1 just return */
808 	if (!r)
809 		return r;
810 
811 	switch (chandef->width) {
812 	case NL80211_CHAN_WIDTH_80P80:
813 		WARN_ON(!chandef->center_freq2);
814 		r = cfg80211_get_chans_dfs_available(wiphy,
815 					MHZ_TO_KHZ(chandef->center_freq2),
816 					width);
817 		break;
818 	default:
819 		WARN_ON(chandef->center_freq2);
820 		break;
821 	}
822 
823 	return r;
824 }
825 
826 static unsigned int cfg80211_get_chans_dfs_cac_time(struct wiphy *wiphy,
827 						    u32 center_freq,
828 						    u32 bandwidth)
829 {
830 	struct ieee80211_channel *c;
831 	u32 start_freq, end_freq, freq;
832 	unsigned int dfs_cac_ms = 0;
833 
834 	start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
835 	end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
836 
837 	for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
838 		c = ieee80211_get_channel_khz(wiphy, freq);
839 		if (!c)
840 			return 0;
841 
842 		if (c->flags & IEEE80211_CHAN_DISABLED)
843 			return 0;
844 
845 		if (!(c->flags & IEEE80211_CHAN_RADAR))
846 			continue;
847 
848 		if (c->dfs_cac_ms > dfs_cac_ms)
849 			dfs_cac_ms = c->dfs_cac_ms;
850 	}
851 
852 	return dfs_cac_ms;
853 }
854 
855 unsigned int
856 cfg80211_chandef_dfs_cac_time(struct wiphy *wiphy,
857 			      const struct cfg80211_chan_def *chandef)
858 {
859 	int width;
860 	unsigned int t1 = 0, t2 = 0;
861 
862 	if (WARN_ON(!cfg80211_chandef_valid(chandef)))
863 		return 0;
864 
865 	width = cfg80211_chandef_get_width(chandef);
866 	if (width < 0)
867 		return 0;
868 
869 	t1 = cfg80211_get_chans_dfs_cac_time(wiphy,
870 					     MHZ_TO_KHZ(chandef->center_freq1),
871 					     width);
872 
873 	if (!chandef->center_freq2)
874 		return t1;
875 
876 	t2 = cfg80211_get_chans_dfs_cac_time(wiphy,
877 					     MHZ_TO_KHZ(chandef->center_freq2),
878 					     width);
879 
880 	return max(t1, t2);
881 }
882 
883 static bool cfg80211_secondary_chans_ok(struct wiphy *wiphy,
884 					u32 center_freq, u32 bandwidth,
885 					u32 prohibited_flags)
886 {
887 	struct ieee80211_channel *c;
888 	u32 freq, start_freq, end_freq;
889 
890 	start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
891 	end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
892 
893 	for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
894 		c = ieee80211_get_channel_khz(wiphy, freq);
895 		if (!c || c->flags & prohibited_flags)
896 			return false;
897 	}
898 
899 	return true;
900 }
901 
902 /* check if the operating channels are valid and supported */
903 static bool cfg80211_edmg_usable(struct wiphy *wiphy, u8 edmg_channels,
904 				 enum ieee80211_edmg_bw_config edmg_bw_config,
905 				 int primary_channel,
906 				 struct ieee80211_edmg *edmg_cap)
907 {
908 	struct ieee80211_channel *chan;
909 	int i, freq;
910 	int channels_counter = 0;
911 
912 	if (!edmg_channels && !edmg_bw_config)
913 		return true;
914 
915 	if ((!edmg_channels && edmg_bw_config) ||
916 	    (edmg_channels && !edmg_bw_config))
917 		return false;
918 
919 	if (!(edmg_channels & BIT(primary_channel - 1)))
920 		return false;
921 
922 	/* 60GHz channels 1..6 */
923 	for (i = 0; i < 6; i++) {
924 		if (!(edmg_channels & BIT(i)))
925 			continue;
926 
927 		if (!(edmg_cap->channels & BIT(i)))
928 			return false;
929 
930 		channels_counter++;
931 
932 		freq = ieee80211_channel_to_frequency(i + 1,
933 						      NL80211_BAND_60GHZ);
934 		chan = ieee80211_get_channel(wiphy, freq);
935 		if (!chan || chan->flags & IEEE80211_CHAN_DISABLED)
936 			return false;
937 	}
938 
939 	/* IEEE802.11 allows max 4 channels */
940 	if (channels_counter > 4)
941 		return false;
942 
943 	/* check bw_config is a subset of what driver supports
944 	 * (see IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13)
945 	 */
946 	if ((edmg_bw_config % 4) > (edmg_cap->bw_config % 4))
947 		return false;
948 
949 	if (edmg_bw_config > edmg_cap->bw_config)
950 		return false;
951 
952 	return true;
953 }
954 
955 bool cfg80211_chandef_usable(struct wiphy *wiphy,
956 			     const struct cfg80211_chan_def *chandef,
957 			     u32 prohibited_flags)
958 {
959 	struct ieee80211_sta_ht_cap *ht_cap;
960 	struct ieee80211_sta_vht_cap *vht_cap;
961 	struct ieee80211_edmg *edmg_cap;
962 	u32 width, control_freq, cap;
963 	bool ext_nss_cap, support_80_80 = false;
964 
965 	if (WARN_ON(!cfg80211_chandef_valid(chandef)))
966 		return false;
967 
968 	ht_cap = &wiphy->bands[chandef->chan->band]->ht_cap;
969 	vht_cap = &wiphy->bands[chandef->chan->band]->vht_cap;
970 	edmg_cap = &wiphy->bands[chandef->chan->band]->edmg_cap;
971 	ext_nss_cap = __le16_to_cpu(vht_cap->vht_mcs.tx_highest) &
972 			IEEE80211_VHT_EXT_NSS_BW_CAPABLE;
973 
974 	if (edmg_cap->channels &&
975 	    !cfg80211_edmg_usable(wiphy,
976 				  chandef->edmg.channels,
977 				  chandef->edmg.bw_config,
978 				  chandef->chan->hw_value,
979 				  edmg_cap))
980 		return false;
981 
982 	control_freq = chandef->chan->center_freq;
983 
984 	switch (chandef->width) {
985 	case NL80211_CHAN_WIDTH_1:
986 		width = 1;
987 		break;
988 	case NL80211_CHAN_WIDTH_2:
989 		width = 2;
990 		break;
991 	case NL80211_CHAN_WIDTH_4:
992 		width = 4;
993 		break;
994 	case NL80211_CHAN_WIDTH_8:
995 		width = 8;
996 		break;
997 	case NL80211_CHAN_WIDTH_16:
998 		width = 16;
999 		break;
1000 	case NL80211_CHAN_WIDTH_5:
1001 		width = 5;
1002 		break;
1003 	case NL80211_CHAN_WIDTH_10:
1004 		prohibited_flags |= IEEE80211_CHAN_NO_10MHZ;
1005 		width = 10;
1006 		break;
1007 	case NL80211_CHAN_WIDTH_20:
1008 		if (!ht_cap->ht_supported &&
1009 		    chandef->chan->band != NL80211_BAND_6GHZ)
1010 			return false;
1011 		fallthrough;
1012 	case NL80211_CHAN_WIDTH_20_NOHT:
1013 		prohibited_flags |= IEEE80211_CHAN_NO_20MHZ;
1014 		width = 20;
1015 		break;
1016 	case NL80211_CHAN_WIDTH_40:
1017 		width = 40;
1018 		if (chandef->chan->band == NL80211_BAND_6GHZ)
1019 			break;
1020 		if (!ht_cap->ht_supported)
1021 			return false;
1022 		if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) ||
1023 		    ht_cap->cap & IEEE80211_HT_CAP_40MHZ_INTOLERANT)
1024 			return false;
1025 		if (chandef->center_freq1 < control_freq &&
1026 		    chandef->chan->flags & IEEE80211_CHAN_NO_HT40MINUS)
1027 			return false;
1028 		if (chandef->center_freq1 > control_freq &&
1029 		    chandef->chan->flags & IEEE80211_CHAN_NO_HT40PLUS)
1030 			return false;
1031 		break;
1032 	case NL80211_CHAN_WIDTH_80P80:
1033 		cap = vht_cap->cap;
1034 		support_80_80 =
1035 			(cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) ||
1036 			(cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ &&
1037 			 cap & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK) ||
1038 			(ext_nss_cap &&
1039 			 u32_get_bits(cap, IEEE80211_VHT_CAP_EXT_NSS_BW_MASK) > 1);
1040 		if (chandef->chan->band != NL80211_BAND_6GHZ && !support_80_80)
1041 			return false;
1042 		fallthrough;
1043 	case NL80211_CHAN_WIDTH_80:
1044 		prohibited_flags |= IEEE80211_CHAN_NO_80MHZ;
1045 		width = 80;
1046 		if (chandef->chan->band == NL80211_BAND_6GHZ)
1047 			break;
1048 		if (!vht_cap->vht_supported)
1049 			return false;
1050 		break;
1051 	case NL80211_CHAN_WIDTH_160:
1052 		prohibited_flags |= IEEE80211_CHAN_NO_160MHZ;
1053 		width = 160;
1054 		if (chandef->chan->band == NL80211_BAND_6GHZ)
1055 			break;
1056 		if (!vht_cap->vht_supported)
1057 			return false;
1058 		cap = vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
1059 		if (cap != IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ &&
1060 		    cap != IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ &&
1061 		    !(ext_nss_cap &&
1062 		      (vht_cap->cap & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK)))
1063 			return false;
1064 		break;
1065 	default:
1066 		WARN_ON_ONCE(1);
1067 		return false;
1068 	}
1069 
1070 	/*
1071 	 * TODO: What if there are only certain 80/160/80+80 MHz channels
1072 	 *	 allowed by the driver, or only certain combinations?
1073 	 *	 For 40 MHz the driver can set the NO_HT40 flags, but for
1074 	 *	 80/160 MHz and in particular 80+80 MHz this isn't really
1075 	 *	 feasible and we only have NO_80MHZ/NO_160MHZ so far but
1076 	 *	 no way to cover 80+80 MHz or more complex restrictions.
1077 	 *	 Note that such restrictions also need to be advertised to
1078 	 *	 userspace, for example for P2P channel selection.
1079 	 */
1080 
1081 	if (width > 20)
1082 		prohibited_flags |= IEEE80211_CHAN_NO_OFDM;
1083 
1084 	/* 5 and 10 MHz are only defined for the OFDM PHY */
1085 	if (width < 20)
1086 		prohibited_flags |= IEEE80211_CHAN_NO_OFDM;
1087 
1088 
1089 	if (!cfg80211_secondary_chans_ok(wiphy,
1090 					 ieee80211_chandef_to_khz(chandef),
1091 					 width, prohibited_flags))
1092 		return false;
1093 
1094 	if (!chandef->center_freq2)
1095 		return true;
1096 	return cfg80211_secondary_chans_ok(wiphy,
1097 					   MHZ_TO_KHZ(chandef->center_freq2),
1098 					   width, prohibited_flags);
1099 }
1100 EXPORT_SYMBOL(cfg80211_chandef_usable);
1101 
1102 /*
1103  * Check if the channel can be used under permissive conditions mandated by
1104  * some regulatory bodies, i.e., the channel is marked with
1105  * IEEE80211_CHAN_IR_CONCURRENT and there is an additional station interface
1106  * associated to an AP on the same channel or on the same UNII band
1107  * (assuming that the AP is an authorized master).
1108  * In addition allow operation on a channel on which indoor operation is
1109  * allowed, iff we are currently operating in an indoor environment.
1110  */
1111 static bool cfg80211_ir_permissive_chan(struct wiphy *wiphy,
1112 					enum nl80211_iftype iftype,
1113 					struct ieee80211_channel *chan)
1114 {
1115 	struct wireless_dev *wdev;
1116 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
1117 
1118 	lockdep_assert_held(&rdev->wiphy.mtx);
1119 
1120 	if (!IS_ENABLED(CONFIG_CFG80211_REG_RELAX_NO_IR) ||
1121 	    !(wiphy->regulatory_flags & REGULATORY_ENABLE_RELAX_NO_IR))
1122 		return false;
1123 
1124 	/* only valid for GO and TDLS off-channel (station/p2p-CL) */
1125 	if (iftype != NL80211_IFTYPE_P2P_GO &&
1126 	    iftype != NL80211_IFTYPE_STATION &&
1127 	    iftype != NL80211_IFTYPE_P2P_CLIENT)
1128 		return false;
1129 
1130 	if (regulatory_indoor_allowed() &&
1131 	    (chan->flags & IEEE80211_CHAN_INDOOR_ONLY))
1132 		return true;
1133 
1134 	if (!(chan->flags & IEEE80211_CHAN_IR_CONCURRENT))
1135 		return false;
1136 
1137 	/*
1138 	 * Generally, it is possible to rely on another device/driver to allow
1139 	 * the IR concurrent relaxation, however, since the device can further
1140 	 * enforce the relaxation (by doing a similar verifications as this),
1141 	 * and thus fail the GO instantiation, consider only the interfaces of
1142 	 * the current registered device.
1143 	 */
1144 	list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
1145 		struct ieee80211_channel *other_chan = NULL;
1146 		int r1, r2;
1147 
1148 		wdev_lock(wdev);
1149 		if (wdev->iftype == NL80211_IFTYPE_STATION &&
1150 		    wdev->current_bss)
1151 			other_chan = wdev->current_bss->pub.channel;
1152 
1153 		/*
1154 		 * If a GO already operates on the same GO_CONCURRENT channel,
1155 		 * this one (maybe the same one) can beacon as well. We allow
1156 		 * the operation even if the station we relied on with
1157 		 * GO_CONCURRENT is disconnected now. But then we must make sure
1158 		 * we're not outdoor on an indoor-only channel.
1159 		 */
1160 		if (iftype == NL80211_IFTYPE_P2P_GO &&
1161 		    wdev->iftype == NL80211_IFTYPE_P2P_GO &&
1162 		    wdev->beacon_interval &&
1163 		    !(chan->flags & IEEE80211_CHAN_INDOOR_ONLY))
1164 			other_chan = wdev->chandef.chan;
1165 		wdev_unlock(wdev);
1166 
1167 		if (!other_chan)
1168 			continue;
1169 
1170 		if (chan == other_chan)
1171 			return true;
1172 
1173 		if (chan->band != NL80211_BAND_5GHZ &&
1174 		    chan->band != NL80211_BAND_6GHZ)
1175 			continue;
1176 
1177 		r1 = cfg80211_get_unii(chan->center_freq);
1178 		r2 = cfg80211_get_unii(other_chan->center_freq);
1179 
1180 		if (r1 != -EINVAL && r1 == r2) {
1181 			/*
1182 			 * At some locations channels 149-165 are considered a
1183 			 * bundle, but at other locations, e.g., Indonesia,
1184 			 * channels 149-161 are considered a bundle while
1185 			 * channel 165 is left out and considered to be in a
1186 			 * different bundle. Thus, in case that there is a
1187 			 * station interface connected to an AP on channel 165,
1188 			 * it is assumed that channels 149-161 are allowed for
1189 			 * GO operations. However, having a station interface
1190 			 * connected to an AP on channels 149-161, does not
1191 			 * allow GO operation on channel 165.
1192 			 */
1193 			if (chan->center_freq == 5825 &&
1194 			    other_chan->center_freq != 5825)
1195 				continue;
1196 			return true;
1197 		}
1198 	}
1199 
1200 	return false;
1201 }
1202 
1203 static bool _cfg80211_reg_can_beacon(struct wiphy *wiphy,
1204 				     struct cfg80211_chan_def *chandef,
1205 				     enum nl80211_iftype iftype,
1206 				     bool check_no_ir)
1207 {
1208 	bool res;
1209 	u32 prohibited_flags = IEEE80211_CHAN_DISABLED |
1210 			       IEEE80211_CHAN_RADAR;
1211 
1212 	trace_cfg80211_reg_can_beacon(wiphy, chandef, iftype, check_no_ir);
1213 
1214 	if (check_no_ir)
1215 		prohibited_flags |= IEEE80211_CHAN_NO_IR;
1216 
1217 	if (cfg80211_chandef_dfs_required(wiphy, chandef, iftype) > 0 &&
1218 	    cfg80211_chandef_dfs_available(wiphy, chandef)) {
1219 		/* We can skip IEEE80211_CHAN_NO_IR if chandef dfs available */
1220 		prohibited_flags = IEEE80211_CHAN_DISABLED;
1221 	}
1222 
1223 	res = cfg80211_chandef_usable(wiphy, chandef, prohibited_flags);
1224 
1225 	trace_cfg80211_return_bool(res);
1226 	return res;
1227 }
1228 
1229 bool cfg80211_reg_can_beacon(struct wiphy *wiphy,
1230 			     struct cfg80211_chan_def *chandef,
1231 			     enum nl80211_iftype iftype)
1232 {
1233 	return _cfg80211_reg_can_beacon(wiphy, chandef, iftype, true);
1234 }
1235 EXPORT_SYMBOL(cfg80211_reg_can_beacon);
1236 
1237 bool cfg80211_reg_can_beacon_relax(struct wiphy *wiphy,
1238 				   struct cfg80211_chan_def *chandef,
1239 				   enum nl80211_iftype iftype)
1240 {
1241 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
1242 	bool check_no_ir;
1243 
1244 	lockdep_assert_held(&rdev->wiphy.mtx);
1245 
1246 	/*
1247 	 * Under certain conditions suggested by some regulatory bodies a
1248 	 * GO/STA can IR on channels marked with IEEE80211_NO_IR. Set this flag
1249 	 * only if such relaxations are not enabled and the conditions are not
1250 	 * met.
1251 	 */
1252 	check_no_ir = !cfg80211_ir_permissive_chan(wiphy, iftype,
1253 						   chandef->chan);
1254 
1255 	return _cfg80211_reg_can_beacon(wiphy, chandef, iftype, check_no_ir);
1256 }
1257 EXPORT_SYMBOL(cfg80211_reg_can_beacon_relax);
1258 
1259 int cfg80211_set_monitor_channel(struct cfg80211_registered_device *rdev,
1260 				 struct cfg80211_chan_def *chandef)
1261 {
1262 	if (!rdev->ops->set_monitor_channel)
1263 		return -EOPNOTSUPP;
1264 	if (!cfg80211_has_monitors_only(rdev))
1265 		return -EBUSY;
1266 
1267 	return rdev_set_monitor_channel(rdev, chandef);
1268 }
1269 
1270 void
1271 cfg80211_get_chan_state(struct wireless_dev *wdev,
1272 		        struct ieee80211_channel **chan,
1273 		        enum cfg80211_chan_mode *chanmode,
1274 		        u8 *radar_detect)
1275 {
1276 	int ret;
1277 
1278 	*chan = NULL;
1279 	*chanmode = CHAN_MODE_UNDEFINED;
1280 
1281 	ASSERT_WDEV_LOCK(wdev);
1282 
1283 	if (wdev->netdev && !netif_running(wdev->netdev))
1284 		return;
1285 
1286 	switch (wdev->iftype) {
1287 	case NL80211_IFTYPE_ADHOC:
1288 		if (wdev->current_bss) {
1289 			*chan = wdev->current_bss->pub.channel;
1290 			*chanmode = (wdev->ibss_fixed &&
1291 				     !wdev->ibss_dfs_possible)
1292 				  ? CHAN_MODE_SHARED
1293 				  : CHAN_MODE_EXCLUSIVE;
1294 
1295 			/* consider worst-case - IBSS can try to return to the
1296 			 * original user-specified channel as creator */
1297 			if (wdev->ibss_dfs_possible)
1298 				*radar_detect |= BIT(wdev->chandef.width);
1299 			return;
1300 		}
1301 		break;
1302 	case NL80211_IFTYPE_STATION:
1303 	case NL80211_IFTYPE_P2P_CLIENT:
1304 		if (wdev->current_bss) {
1305 			*chan = wdev->current_bss->pub.channel;
1306 			*chanmode = CHAN_MODE_SHARED;
1307 			return;
1308 		}
1309 		break;
1310 	case NL80211_IFTYPE_AP:
1311 	case NL80211_IFTYPE_P2P_GO:
1312 		if (wdev->cac_started) {
1313 			*chan = wdev->chandef.chan;
1314 			*chanmode = CHAN_MODE_SHARED;
1315 			*radar_detect |= BIT(wdev->chandef.width);
1316 		} else if (wdev->beacon_interval) {
1317 			*chan = wdev->chandef.chan;
1318 			*chanmode = CHAN_MODE_SHARED;
1319 
1320 			ret = cfg80211_chandef_dfs_required(wdev->wiphy,
1321 							    &wdev->chandef,
1322 							    wdev->iftype);
1323 			WARN_ON(ret < 0);
1324 			if (ret > 0)
1325 				*radar_detect |= BIT(wdev->chandef.width);
1326 		}
1327 		return;
1328 	case NL80211_IFTYPE_MESH_POINT:
1329 		if (wdev->mesh_id_len) {
1330 			*chan = wdev->chandef.chan;
1331 			*chanmode = CHAN_MODE_SHARED;
1332 
1333 			ret = cfg80211_chandef_dfs_required(wdev->wiphy,
1334 							    &wdev->chandef,
1335 							    wdev->iftype);
1336 			WARN_ON(ret < 0);
1337 			if (ret > 0)
1338 				*radar_detect |= BIT(wdev->chandef.width);
1339 		}
1340 		return;
1341 	case NL80211_IFTYPE_OCB:
1342 		if (wdev->chandef.chan) {
1343 			*chan = wdev->chandef.chan;
1344 			*chanmode = CHAN_MODE_SHARED;
1345 			return;
1346 		}
1347 		break;
1348 	case NL80211_IFTYPE_MONITOR:
1349 	case NL80211_IFTYPE_AP_VLAN:
1350 	case NL80211_IFTYPE_P2P_DEVICE:
1351 	case NL80211_IFTYPE_NAN:
1352 		/* these interface types don't really have a channel */
1353 		return;
1354 	case NL80211_IFTYPE_UNSPECIFIED:
1355 	case NL80211_IFTYPE_WDS:
1356 	case NUM_NL80211_IFTYPES:
1357 		WARN_ON(1);
1358 	}
1359 }
1360 
1361 bool cfg80211_any_usable_channels(struct wiphy *wiphy,
1362 				  unsigned long sband_mask,
1363 				  u32 prohibited_flags)
1364 {
1365 	int idx;
1366 
1367 	prohibited_flags |= IEEE80211_CHAN_DISABLED;
1368 
1369 	for_each_set_bit(idx, &sband_mask, NUM_NL80211_BANDS) {
1370 		struct ieee80211_supported_band *sband = wiphy->bands[idx];
1371 		int chanidx;
1372 
1373 		if (!sband)
1374 			continue;
1375 
1376 		for (chanidx = 0; chanidx < sband->n_channels; chanidx++) {
1377 			struct ieee80211_channel *chan;
1378 
1379 			chan = &sband->channels[chanidx];
1380 
1381 			if (chan->flags & prohibited_flags)
1382 				continue;
1383 
1384 			return true;
1385 		}
1386 	}
1387 
1388 	return false;
1389 }
1390 EXPORT_SYMBOL(cfg80211_any_usable_channels);
1391