1config WIRELESS_EXT 2 bool 3 4config WEXT_CORE 5 def_bool y 6 depends on CFG80211_WEXT || WIRELESS_EXT 7 8config WEXT_PROC 9 def_bool y 10 depends on PROC_FS 11 depends on WEXT_CORE 12 13config WEXT_SPY 14 bool 15 16config WEXT_PRIV 17 bool 18 19config CFG80211 20 tristate "cfg80211 - wireless configuration API" 21 depends on RFKILL || !RFKILL 22 select FW_LOADER 23 # may need to update this when certificates are changed and are 24 # using a different algorithm, though right now they shouldn't 25 # (this is here rather than below to allow it to be a module) 26 select CRYPTO_SHA256 if CFG80211_USE_KERNEL_REGDB_KEYS 27 ---help--- 28 cfg80211 is the Linux wireless LAN (802.11) configuration API. 29 Enable this if you have a wireless device. 30 31 For more information refer to documentation on the wireless wiki: 32 33 http://wireless.kernel.org/en/developers/Documentation/cfg80211 34 35 When built as a module it will be called cfg80211. 36 37config NL80211_TESTMODE 38 bool "nl80211 testmode command" 39 depends on CFG80211 40 help 41 The nl80211 testmode command helps implementing things like 42 factory calibration or validation tools for wireless chips. 43 44 Select this option ONLY for kernels that are specifically 45 built for such purposes. 46 47 Debugging tools that are supposed to end up in the hands of 48 users should better be implemented with debugfs. 49 50 Say N. 51 52config CFG80211_DEVELOPER_WARNINGS 53 bool "enable developer warnings" 54 depends on CFG80211 55 default n 56 help 57 This option enables some additional warnings that help 58 cfg80211 developers and driver developers, but beware that 59 they can also trigger due to races with userspace. 60 61 For example, when a driver reports that it was disconnected 62 from the AP, but the user disconnects manually at the same 63 time, the warning might trigger spuriously due to races. 64 65 Say Y only if you are developing cfg80211 or a driver based 66 on it (or mac80211). 67 68 69config CFG80211_CERTIFICATION_ONUS 70 bool "cfg80211 certification onus" 71 depends on CFG80211 && EXPERT 72 default n 73 ---help--- 74 You should disable this option unless you are both capable 75 and willing to ensure your system will remain regulatory 76 compliant with the features available under this option. 77 Some options may still be under heavy development and 78 for whatever reason regulatory compliance has not or 79 cannot yet be verified. Regulatory verification may at 80 times only be possible until you have the final system 81 in place. 82 83 This option should only be enabled by system integrators 84 or distributions that have done work necessary to ensure 85 regulatory certification on the system with the enabled 86 features. Alternatively you can enable this option if 87 you are a wireless researcher and are working in a controlled 88 and approved environment by your local regulatory agency. 89 90config CFG80211_REQUIRE_SIGNED_REGDB 91 bool "require regdb signature" if CFG80211_CERTIFICATION_ONUS 92 default y 93 select SYSTEM_DATA_VERIFICATION 94 help 95 Require that in addition to the "regulatory.db" file a 96 "regulatory.db.p7s" can be loaded with a valid PKCS#7 97 signature for the regulatory.db file made by one of the 98 keys in the certs/ directory. 99 100config CFG80211_USE_KERNEL_REGDB_KEYS 101 bool "allow regdb keys shipped with the kernel" if CFG80211_CERTIFICATION_ONUS 102 default y 103 depends on CFG80211_REQUIRE_SIGNED_REGDB 104 help 105 Allow the regulatory database to be signed by one of the keys for 106 which certificates are part of the kernel sources 107 (in net/wireless/certs/). 108 109 This is currently only Seth Forshee's key, who is the regulatory 110 database maintainer. 111 112config CFG80211_EXTRA_REGDB_KEYDIR 113 string "additional regdb key directory" if CFG80211_CERTIFICATION_ONUS 114 depends on CFG80211_REQUIRE_SIGNED_REGDB 115 help 116 If selected, point to a directory with DER-encoded X.509 117 certificates like in the kernel sources (net/wireless/certs/) 118 that shall be accepted for a signed regulatory database. 119 120 Note that you need to also select the correct CRYPTO_<hash> modules 121 for your certificates, and if cfg80211 is built-in they also must be. 122 123config CFG80211_REG_CELLULAR_HINTS 124 bool "cfg80211 regulatory support for cellular base station hints" 125 depends on CFG80211_CERTIFICATION_ONUS 126 ---help--- 127 This option enables support for parsing regulatory hints 128 from cellular base stations. If enabled and at least one driver 129 claims support for parsing cellular base station hints the 130 regulatory core will allow and parse these regulatory hints. 131 The regulatory core will only apply these regulatory hints on 132 drivers that support this feature. You should only enable this 133 feature if you have tested and validated this feature on your 134 systems. 135 136config CFG80211_REG_RELAX_NO_IR 137 bool "cfg80211 support for NO_IR relaxation" 138 depends on CFG80211_CERTIFICATION_ONUS 139 ---help--- 140 This option enables support for relaxation of the NO_IR flag for 141 situations that certain regulatory bodies have provided clarifications 142 on how relaxation can occur. This feature has an inherent dependency on 143 userspace features which must have been properly tested and as such is 144 not enabled by default. 145 146 A relaxation feature example is allowing the operation of a P2P group 147 owner (GO) on channels marked with NO_IR if there is an additional BSS 148 interface which associated to an AP which userspace assumes or confirms 149 to be an authorized master, i.e., with radar detection support and DFS 150 capabilities. However, note that in order to not create daisy chain 151 scenarios, this relaxation is not allowed in cases where the BSS client 152 is associated to P2P GO and in addition the P2P GO instantiated on 153 a channel due to this relaxation should not allow connection from 154 non P2P clients. 155 156 The regulatory core will apply these relaxations only for drivers that 157 support this feature by declaring the appropriate channel flags and 158 capabilities in their registration flow. 159 160config CFG80211_DEFAULT_PS 161 bool "enable powersave by default" 162 depends on CFG80211 163 default y 164 help 165 This option enables powersave mode by default. 166 167 If this causes your applications to misbehave you should fix your 168 applications instead -- they need to register their network 169 latency requirement, see Documentation/power/pm_qos_interface.txt. 170 171config CFG80211_DEBUGFS 172 bool "cfg80211 DebugFS entries" 173 depends on CFG80211 174 depends on DEBUG_FS 175 ---help--- 176 You can enable this if you want debugfs entries for cfg80211. 177 178 If unsure, say N. 179 180config CFG80211_CRDA_SUPPORT 181 bool "support CRDA" if EXPERT 182 default y 183 depends on CFG80211 184 help 185 You should enable this option unless you know for sure you have no 186 need for it, for example when using internal regdb (above) or the 187 database loaded as a firmware file. 188 189 If unsure, say Y. 190 191config CFG80211_WEXT 192 bool "cfg80211 wireless extensions compatibility" if !CFG80211_WEXT_EXPORT 193 depends on CFG80211 194 select WEXT_CORE 195 default y if CFG80211_WEXT_EXPORT 196 help 197 Enable this option if you need old userspace for wireless 198 extensions with cfg80211-based drivers. 199 200config CFG80211_WEXT_EXPORT 201 bool 202 depends on CFG80211 203 help 204 Drivers should select this option if they require cfg80211's 205 wext compatibility symbols to be exported. 206 207config LIB80211 208 tristate 209 default n 210 help 211 This options enables a library of common routines used 212 by IEEE802.11 wireless LAN drivers. 213 214 Drivers should select this themselves if needed. 215 216config LIB80211_CRYPT_WEP 217 tristate 218 219config LIB80211_CRYPT_CCMP 220 tristate 221 222config LIB80211_CRYPT_TKIP 223 tristate 224 225config LIB80211_DEBUG 226 bool "lib80211 debugging messages" 227 depends on LIB80211 228 default n 229 ---help--- 230 You can enable this if you want verbose debugging messages 231 from lib80211. 232 233 If unsure, say N. 234