xref: /linux/net/tipc/core.c (revision f9bff0e31881d03badf191d3b0005839391f5f2b)
1 /*
2  * net/tipc/core.c: TIPC module code
3  *
4  * Copyright (c) 2003-2006, 2013, Ericsson AB
5  * Copyright (c) 2005-2006, 2010-2013, Wind River Systems
6  * All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions are met:
10  *
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  * 3. Neither the names of the copyright holders nor the names of its
17  *    contributors may be used to endorse or promote products derived from
18  *    this software without specific prior written permission.
19  *
20  * Alternatively, this software may be distributed under the terms of the
21  * GNU General Public License ("GPL") version 2 as published by the Free
22  * Software Foundation.
23  *
24  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34  * POSSIBILITY OF SUCH DAMAGE.
35  */
36 
37 #include "core.h"
38 #include "name_table.h"
39 #include "subscr.h"
40 #include "bearer.h"
41 #include "net.h"
42 #include "socket.h"
43 #include "bcast.h"
44 #include "node.h"
45 #include "crypto.h"
46 
47 #include <linux/module.h>
48 
49 /* configurable TIPC parameters */
50 unsigned int tipc_net_id __read_mostly;
51 int sysctl_tipc_rmem[3] __read_mostly;	/* min/default/max */
52 
53 static int __net_init tipc_init_net(struct net *net)
54 {
55 	struct tipc_net *tn = net_generic(net, tipc_net_id);
56 	int err;
57 
58 	tn->net_id = 4711;
59 	tn->node_addr = 0;
60 	tn->trial_addr = 0;
61 	tn->addr_trial_end = 0;
62 	tn->capabilities = TIPC_NODE_CAPABILITIES;
63 	INIT_WORK(&tn->work, tipc_net_finalize_work);
64 	memset(tn->node_id, 0, sizeof(tn->node_id));
65 	memset(tn->node_id_string, 0, sizeof(tn->node_id_string));
66 	tn->mon_threshold = TIPC_DEF_MON_THRESHOLD;
67 	get_random_bytes(&tn->random, sizeof(int));
68 	INIT_LIST_HEAD(&tn->node_list);
69 	spin_lock_init(&tn->node_list_lock);
70 
71 #ifdef CONFIG_TIPC_CRYPTO
72 	err = tipc_crypto_start(&tn->crypto_tx, net, NULL);
73 	if (err)
74 		goto out_crypto;
75 #endif
76 	err = tipc_sk_rht_init(net);
77 	if (err)
78 		goto out_sk_rht;
79 
80 	err = tipc_nametbl_init(net);
81 	if (err)
82 		goto out_nametbl;
83 
84 	err = tipc_bcast_init(net);
85 	if (err)
86 		goto out_bclink;
87 
88 	err = tipc_attach_loopback(net);
89 	if (err)
90 		goto out_bclink;
91 
92 	return 0;
93 
94 out_bclink:
95 	tipc_nametbl_stop(net);
96 out_nametbl:
97 	tipc_sk_rht_destroy(net);
98 out_sk_rht:
99 
100 #ifdef CONFIG_TIPC_CRYPTO
101 	tipc_crypto_stop(&tn->crypto_tx);
102 out_crypto:
103 #endif
104 	return err;
105 }
106 
107 static void __net_exit tipc_exit_net(struct net *net)
108 {
109 	struct tipc_net *tn = tipc_net(net);
110 
111 	tipc_detach_loopback(net);
112 	tipc_net_stop(net);
113 	/* Make sure the tipc_net_finalize_work() finished */
114 	cancel_work_sync(&tn->work);
115 	tipc_bcast_stop(net);
116 	tipc_nametbl_stop(net);
117 	tipc_sk_rht_destroy(net);
118 #ifdef CONFIG_TIPC_CRYPTO
119 	tipc_crypto_stop(&tipc_net(net)->crypto_tx);
120 #endif
121 	while (atomic_read(&tn->wq_count))
122 		cond_resched();
123 }
124 
125 static void __net_exit tipc_pernet_pre_exit(struct net *net)
126 {
127 	tipc_node_pre_cleanup_net(net);
128 }
129 
130 static struct pernet_operations tipc_pernet_pre_exit_ops = {
131 	.pre_exit = tipc_pernet_pre_exit,
132 };
133 
134 static struct pernet_operations tipc_net_ops = {
135 	.init = tipc_init_net,
136 	.exit = tipc_exit_net,
137 	.id   = &tipc_net_id,
138 	.size = sizeof(struct tipc_net),
139 };
140 
141 static struct pernet_operations tipc_topsrv_net_ops = {
142 	.init = tipc_topsrv_init_net,
143 	.exit = tipc_topsrv_exit_net,
144 };
145 
146 static int __init tipc_init(void)
147 {
148 	int err;
149 
150 	pr_info("Activated (version " TIPC_MOD_VER ")\n");
151 
152 	sysctl_tipc_rmem[0] = RCVBUF_MIN;
153 	sysctl_tipc_rmem[1] = RCVBUF_DEF;
154 	sysctl_tipc_rmem[2] = RCVBUF_MAX;
155 
156 	err = tipc_register_sysctl();
157 	if (err)
158 		goto out_sysctl;
159 
160 	err = register_pernet_device(&tipc_net_ops);
161 	if (err)
162 		goto out_pernet;
163 
164 	err = tipc_socket_init();
165 	if (err)
166 		goto out_socket;
167 
168 	err = register_pernet_device(&tipc_topsrv_net_ops);
169 	if (err)
170 		goto out_pernet_topsrv;
171 
172 	err = register_pernet_subsys(&tipc_pernet_pre_exit_ops);
173 	if (err)
174 		goto out_register_pernet_subsys;
175 
176 	err = tipc_bearer_setup();
177 	if (err)
178 		goto out_bearer;
179 
180 	err = tipc_netlink_start();
181 	if (err)
182 		goto out_netlink;
183 
184 	err = tipc_netlink_compat_start();
185 	if (err)
186 		goto out_netlink_compat;
187 
188 	pr_info("Started in single node mode\n");
189 	return 0;
190 
191 out_netlink_compat:
192 	tipc_netlink_stop();
193 out_netlink:
194 	tipc_bearer_cleanup();
195 out_bearer:
196 	unregister_pernet_subsys(&tipc_pernet_pre_exit_ops);
197 out_register_pernet_subsys:
198 	unregister_pernet_device(&tipc_topsrv_net_ops);
199 out_pernet_topsrv:
200 	tipc_socket_stop();
201 out_socket:
202 	unregister_pernet_device(&tipc_net_ops);
203 out_pernet:
204 	tipc_unregister_sysctl();
205 out_sysctl:
206 	pr_err("Unable to start in single node mode\n");
207 	return err;
208 }
209 
210 static void __exit tipc_exit(void)
211 {
212 	tipc_netlink_compat_stop();
213 	tipc_netlink_stop();
214 	tipc_bearer_cleanup();
215 	unregister_pernet_subsys(&tipc_pernet_pre_exit_ops);
216 	unregister_pernet_device(&tipc_topsrv_net_ops);
217 	tipc_socket_stop();
218 	unregister_pernet_device(&tipc_net_ops);
219 	tipc_unregister_sysctl();
220 
221 	pr_info("Deactivated\n");
222 }
223 
224 module_init(tipc_init);
225 module_exit(tipc_exit);
226 
227 MODULE_DESCRIPTION("TIPC: Transparent Inter Process Communication");
228 MODULE_LICENSE("Dual BSD/GPL");
229 MODULE_VERSION(TIPC_MOD_VER);
230