1 // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause 2 /* 3 * Copyright (c) 2016-2018 Oracle. All rights reserved. 4 * Copyright (c) 2014 Open Grid Computing, Inc. All rights reserved. 5 * Copyright (c) 2005-2006 Network Appliance, Inc. All rights reserved. 6 * 7 * This software is available to you under a choice of one of two 8 * licenses. You may choose to be licensed under the terms of the GNU 9 * General Public License (GPL) Version 2, available from the file 10 * COPYING in the main directory of this source tree, or the BSD-type 11 * license below: 12 * 13 * Redistribution and use in source and binary forms, with or without 14 * modification, are permitted provided that the following conditions 15 * are met: 16 * 17 * Redistributions of source code must retain the above copyright 18 * notice, this list of conditions and the following disclaimer. 19 * 20 * Redistributions in binary form must reproduce the above 21 * copyright notice, this list of conditions and the following 22 * disclaimer in the documentation and/or other materials provided 23 * with the distribution. 24 * 25 * Neither the name of the Network Appliance, Inc. nor the names of 26 * its contributors may be used to endorse or promote products 27 * derived from this software without specific prior written 28 * permission. 29 * 30 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 31 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 32 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 33 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 34 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 35 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 36 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 37 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 38 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 39 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 40 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 41 * 42 * Author: Tom Tucker <tom@opengridcomputing.com> 43 */ 44 45 /* Operation 46 * 47 * The main entry point is svc_rdma_sendto. This is called by the 48 * RPC server when an RPC Reply is ready to be transmitted to a client. 49 * 50 * The passed-in svc_rqst contains a struct xdr_buf which holds an 51 * XDR-encoded RPC Reply message. sendto must construct the RPC-over-RDMA 52 * transport header, post all Write WRs needed for this Reply, then post 53 * a Send WR conveying the transport header and the RPC message itself to 54 * the client. 55 * 56 * svc_rdma_sendto must fully transmit the Reply before returning, as 57 * the svc_rqst will be recycled as soon as sendto returns. Remaining 58 * resources referred to by the svc_rqst are also recycled at that time. 59 * Therefore any resources that must remain longer must be detached 60 * from the svc_rqst and released later. 61 * 62 * Page Management 63 * 64 * The I/O that performs Reply transmission is asynchronous, and may 65 * complete well after sendto returns. Thus pages under I/O must be 66 * removed from the svc_rqst before sendto returns. 67 * 68 * The logic here depends on Send Queue and completion ordering. Since 69 * the Send WR is always posted last, it will always complete last. Thus 70 * when it completes, it is guaranteed that all previous Write WRs have 71 * also completed. 72 * 73 * Write WRs are constructed and posted. Each Write segment gets its own 74 * svc_rdma_rw_ctxt, allowing the Write completion handler to find and 75 * DMA-unmap the pages under I/O for that Write segment. The Write 76 * completion handler does not release any pages. 77 * 78 * When the Send WR is constructed, it also gets its own svc_rdma_send_ctxt. 79 * The ownership of all of the Reply's pages are transferred into that 80 * ctxt, the Send WR is posted, and sendto returns. 81 * 82 * The svc_rdma_send_ctxt is presented when the Send WR completes. The 83 * Send completion handler finally releases the Reply's pages. 84 * 85 * This mechanism also assumes that completions on the transport's Send 86 * Completion Queue do not run in parallel. Otherwise a Write completion 87 * and Send completion running at the same time could release pages that 88 * are still DMA-mapped. 89 * 90 * Error Handling 91 * 92 * - If the Send WR is posted successfully, it will either complete 93 * successfully, or get flushed. Either way, the Send completion 94 * handler releases the Reply's pages. 95 * - If the Send WR cannot be not posted, the forward path releases 96 * the Reply's pages. 97 * 98 * This handles the case, without the use of page reference counting, 99 * where two different Write segments send portions of the same page. 100 */ 101 102 #include <linux/spinlock.h> 103 #include <linux/unaligned.h> 104 105 #include <rdma/ib_verbs.h> 106 #include <rdma/rdma_cm.h> 107 108 #include <linux/sunrpc/debug.h> 109 #include <linux/sunrpc/svc_rdma.h> 110 111 #include "xprt_rdma.h" 112 #include <trace/events/rpcrdma.h> 113 114 static void svc_rdma_wc_send(struct ib_cq *cq, struct ib_wc *wc); 115 116 static struct svc_rdma_send_ctxt * 117 svc_rdma_send_ctxt_alloc(struct svcxprt_rdma *rdma) 118 { 119 int node = ibdev_to_node(rdma->sc_cm_id->device); 120 struct svc_rdma_send_ctxt *ctxt; 121 dma_addr_t addr; 122 void *buffer; 123 int i; 124 125 ctxt = kzalloc_node(struct_size(ctxt, sc_sges, rdma->sc_max_send_sges), 126 GFP_KERNEL, node); 127 if (!ctxt) 128 goto fail0; 129 buffer = kmalloc_node(rdma->sc_max_req_size, GFP_KERNEL, node); 130 if (!buffer) 131 goto fail1; 132 addr = ib_dma_map_single(rdma->sc_pd->device, buffer, 133 rdma->sc_max_req_size, DMA_TO_DEVICE); 134 if (ib_dma_mapping_error(rdma->sc_pd->device, addr)) 135 goto fail2; 136 137 svc_rdma_send_cid_init(rdma, &ctxt->sc_cid); 138 139 ctxt->sc_rdma = rdma; 140 ctxt->sc_send_wr.next = NULL; 141 ctxt->sc_send_wr.wr_cqe = &ctxt->sc_cqe; 142 ctxt->sc_send_wr.sg_list = ctxt->sc_sges; 143 ctxt->sc_send_wr.send_flags = IB_SEND_SIGNALED; 144 ctxt->sc_cqe.done = svc_rdma_wc_send; 145 ctxt->sc_xprt_buf = buffer; 146 xdr_buf_init(&ctxt->sc_hdrbuf, ctxt->sc_xprt_buf, 147 rdma->sc_max_req_size); 148 ctxt->sc_sges[0].addr = addr; 149 150 for (i = 0; i < rdma->sc_max_send_sges; i++) 151 ctxt->sc_sges[i].lkey = rdma->sc_pd->local_dma_lkey; 152 return ctxt; 153 154 fail2: 155 kfree(buffer); 156 fail1: 157 kfree(ctxt); 158 fail0: 159 return NULL; 160 } 161 162 /** 163 * svc_rdma_send_ctxts_destroy - Release all send_ctxt's for an xprt 164 * @rdma: svcxprt_rdma being torn down 165 * 166 */ 167 void svc_rdma_send_ctxts_destroy(struct svcxprt_rdma *rdma) 168 { 169 struct svc_rdma_send_ctxt *ctxt; 170 struct llist_node *node; 171 172 while ((node = llist_del_first(&rdma->sc_send_ctxts)) != NULL) { 173 ctxt = llist_entry(node, struct svc_rdma_send_ctxt, sc_node); 174 ib_dma_unmap_single(rdma->sc_pd->device, 175 ctxt->sc_sges[0].addr, 176 rdma->sc_max_req_size, 177 DMA_TO_DEVICE); 178 kfree(ctxt->sc_xprt_buf); 179 kfree(ctxt); 180 } 181 } 182 183 /** 184 * svc_rdma_send_ctxt_get - Get a free send_ctxt 185 * @rdma: controlling svcxprt_rdma 186 * 187 * Returns a ready-to-use send_ctxt, or NULL if none are 188 * available and a fresh one cannot be allocated. 189 */ 190 struct svc_rdma_send_ctxt *svc_rdma_send_ctxt_get(struct svcxprt_rdma *rdma) 191 { 192 struct svc_rdma_send_ctxt *ctxt; 193 struct llist_node *node; 194 195 spin_lock(&rdma->sc_send_lock); 196 node = llist_del_first(&rdma->sc_send_ctxts); 197 spin_unlock(&rdma->sc_send_lock); 198 if (!node) 199 goto out_empty; 200 201 ctxt = llist_entry(node, struct svc_rdma_send_ctxt, sc_node); 202 203 out: 204 rpcrdma_set_xdrlen(&ctxt->sc_hdrbuf, 0); 205 xdr_init_encode(&ctxt->sc_stream, &ctxt->sc_hdrbuf, 206 ctxt->sc_xprt_buf, NULL); 207 208 svc_rdma_cc_init(rdma, &ctxt->sc_reply_info.wi_cc); 209 ctxt->sc_send_wr.num_sge = 0; 210 ctxt->sc_cur_sge_no = 0; 211 ctxt->sc_page_count = 0; 212 ctxt->sc_wr_chain = &ctxt->sc_send_wr; 213 ctxt->sc_sqecount = 1; 214 215 return ctxt; 216 217 out_empty: 218 ctxt = svc_rdma_send_ctxt_alloc(rdma); 219 if (!ctxt) 220 return NULL; 221 goto out; 222 } 223 224 static void svc_rdma_send_ctxt_release(struct svcxprt_rdma *rdma, 225 struct svc_rdma_send_ctxt *ctxt) 226 { 227 struct ib_device *device = rdma->sc_cm_id->device; 228 unsigned int i; 229 230 svc_rdma_reply_chunk_release(rdma, ctxt); 231 232 if (ctxt->sc_page_count) 233 release_pages(ctxt->sc_pages, ctxt->sc_page_count); 234 235 /* The first SGE contains the transport header, which 236 * remains mapped until @ctxt is destroyed. 237 */ 238 for (i = 1; i < ctxt->sc_send_wr.num_sge; i++) { 239 trace_svcrdma_dma_unmap_page(&ctxt->sc_cid, 240 ctxt->sc_sges[i].addr, 241 ctxt->sc_sges[i].length); 242 ib_dma_unmap_page(device, 243 ctxt->sc_sges[i].addr, 244 ctxt->sc_sges[i].length, 245 DMA_TO_DEVICE); 246 } 247 248 llist_add(&ctxt->sc_node, &rdma->sc_send_ctxts); 249 } 250 251 static void svc_rdma_send_ctxt_put_async(struct work_struct *work) 252 { 253 struct svc_rdma_send_ctxt *ctxt; 254 255 ctxt = container_of(work, struct svc_rdma_send_ctxt, sc_work); 256 svc_rdma_send_ctxt_release(ctxt->sc_rdma, ctxt); 257 } 258 259 /** 260 * svc_rdma_send_ctxt_put - Return send_ctxt to free list 261 * @rdma: controlling svcxprt_rdma 262 * @ctxt: object to return to the free list 263 * 264 * Pages left in sc_pages are DMA unmapped and released. 265 */ 266 void svc_rdma_send_ctxt_put(struct svcxprt_rdma *rdma, 267 struct svc_rdma_send_ctxt *ctxt) 268 { 269 INIT_WORK(&ctxt->sc_work, svc_rdma_send_ctxt_put_async); 270 queue_work(svcrdma_wq, &ctxt->sc_work); 271 } 272 273 /** 274 * svc_rdma_wake_send_waiters - manage Send Queue accounting 275 * @rdma: controlling transport 276 * @avail: Number of additional SQEs that are now available 277 * 278 */ 279 void svc_rdma_wake_send_waiters(struct svcxprt_rdma *rdma, int avail) 280 { 281 atomic_add(avail, &rdma->sc_sq_avail); 282 smp_mb__after_atomic(); 283 if (unlikely(waitqueue_active(&rdma->sc_send_wait))) 284 wake_up(&rdma->sc_send_wait); 285 } 286 287 /** 288 * svc_rdma_wc_send - Invoked by RDMA provider for each polled Send WC 289 * @cq: Completion Queue context 290 * @wc: Work Completion object 291 * 292 * NB: The svc_xprt/svcxprt_rdma is pinned whenever it's possible that 293 * the Send completion handler could be running. 294 */ 295 static void svc_rdma_wc_send(struct ib_cq *cq, struct ib_wc *wc) 296 { 297 struct svcxprt_rdma *rdma = cq->cq_context; 298 struct ib_cqe *cqe = wc->wr_cqe; 299 struct svc_rdma_send_ctxt *ctxt = 300 container_of(cqe, struct svc_rdma_send_ctxt, sc_cqe); 301 302 svc_rdma_wake_send_waiters(rdma, ctxt->sc_sqecount); 303 304 if (unlikely(wc->status != IB_WC_SUCCESS)) 305 goto flushed; 306 307 trace_svcrdma_wc_send(&ctxt->sc_cid); 308 svc_rdma_send_ctxt_put(rdma, ctxt); 309 return; 310 311 flushed: 312 if (wc->status != IB_WC_WR_FLUSH_ERR) 313 trace_svcrdma_wc_send_err(wc, &ctxt->sc_cid); 314 else 315 trace_svcrdma_wc_send_flush(wc, &ctxt->sc_cid); 316 svc_rdma_send_ctxt_put(rdma, ctxt); 317 svc_xprt_deferred_close(&rdma->sc_xprt); 318 } 319 320 /** 321 * svc_rdma_post_send - Post a WR chain to the Send Queue 322 * @rdma: transport context 323 * @ctxt: WR chain to post 324 * 325 * Copy fields in @ctxt to stack variables in order to guarantee 326 * that these values remain available after the ib_post_send() call. 327 * In some error flow cases, svc_rdma_wc_send() releases @ctxt. 328 * 329 * Note there is potential for starvation when the Send Queue is 330 * full because there is no order to when waiting threads are 331 * awoken. The transport is typically provisioned with a deep 332 * enough Send Queue that SQ exhaustion should be a rare event. 333 * 334 * Return values: 335 * %0: @ctxt's WR chain was posted successfully 336 * %-ENOTCONN: The connection was lost 337 */ 338 int svc_rdma_post_send(struct svcxprt_rdma *rdma, 339 struct svc_rdma_send_ctxt *ctxt) 340 { 341 struct ib_send_wr *first_wr = ctxt->sc_wr_chain; 342 struct ib_send_wr *send_wr = &ctxt->sc_send_wr; 343 const struct ib_send_wr *bad_wr = first_wr; 344 struct rpc_rdma_cid cid = ctxt->sc_cid; 345 int ret, sqecount = ctxt->sc_sqecount; 346 347 might_sleep(); 348 349 /* Sync the transport header buffer */ 350 ib_dma_sync_single_for_device(rdma->sc_pd->device, 351 send_wr->sg_list[0].addr, 352 send_wr->sg_list[0].length, 353 DMA_TO_DEVICE); 354 355 /* If the SQ is full, wait until an SQ entry is available */ 356 while (!test_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags)) { 357 if (atomic_sub_return(sqecount, &rdma->sc_sq_avail) < 0) { 358 svc_rdma_wake_send_waiters(rdma, sqecount); 359 360 /* When the transport is torn down, assume 361 * ib_drain_sq() will trigger enough Send 362 * completions to wake us. The XPT_CLOSE test 363 * above should then cause the while loop to 364 * exit. 365 */ 366 percpu_counter_inc(&svcrdma_stat_sq_starve); 367 trace_svcrdma_sq_full(rdma, &cid); 368 wait_event(rdma->sc_send_wait, 369 atomic_read(&rdma->sc_sq_avail) > 0); 370 trace_svcrdma_sq_retry(rdma, &cid); 371 continue; 372 } 373 374 trace_svcrdma_post_send(ctxt); 375 ret = ib_post_send(rdma->sc_qp, first_wr, &bad_wr); 376 if (ret) { 377 trace_svcrdma_sq_post_err(rdma, &cid, ret); 378 svc_xprt_deferred_close(&rdma->sc_xprt); 379 380 /* If even one WR was posted, there will be a 381 * Send completion that bumps sc_sq_avail. 382 */ 383 if (bad_wr == first_wr) { 384 svc_rdma_wake_send_waiters(rdma, sqecount); 385 break; 386 } 387 } 388 return 0; 389 } 390 return -ENOTCONN; 391 } 392 393 /** 394 * svc_rdma_encode_read_list - Encode RPC Reply's Read chunk list 395 * @sctxt: Send context for the RPC Reply 396 * 397 * Return values: 398 * On success, returns length in bytes of the Reply XDR buffer 399 * that was consumed by the Reply Read list 400 * %-EMSGSIZE on XDR buffer overflow 401 */ 402 static ssize_t svc_rdma_encode_read_list(struct svc_rdma_send_ctxt *sctxt) 403 { 404 /* RPC-over-RDMA version 1 replies never have a Read list. */ 405 return xdr_stream_encode_item_absent(&sctxt->sc_stream); 406 } 407 408 /** 409 * svc_rdma_encode_write_segment - Encode one Write segment 410 * @sctxt: Send context for the RPC Reply 411 * @chunk: Write chunk to push 412 * @remaining: remaining bytes of the payload left in the Write chunk 413 * @segno: which segment in the chunk 414 * 415 * Return values: 416 * On success, returns length in bytes of the Reply XDR buffer 417 * that was consumed by the Write segment, and updates @remaining 418 * %-EMSGSIZE on XDR buffer overflow 419 */ 420 static ssize_t svc_rdma_encode_write_segment(struct svc_rdma_send_ctxt *sctxt, 421 const struct svc_rdma_chunk *chunk, 422 u32 *remaining, unsigned int segno) 423 { 424 const struct svc_rdma_segment *segment = &chunk->ch_segments[segno]; 425 const size_t len = rpcrdma_segment_maxsz * sizeof(__be32); 426 u32 length; 427 __be32 *p; 428 429 p = xdr_reserve_space(&sctxt->sc_stream, len); 430 if (!p) 431 return -EMSGSIZE; 432 433 length = min_t(u32, *remaining, segment->rs_length); 434 *remaining -= length; 435 xdr_encode_rdma_segment(p, segment->rs_handle, length, 436 segment->rs_offset); 437 trace_svcrdma_encode_wseg(sctxt, segno, segment->rs_handle, length, 438 segment->rs_offset); 439 return len; 440 } 441 442 /** 443 * svc_rdma_encode_write_chunk - Encode one Write chunk 444 * @sctxt: Send context for the RPC Reply 445 * @chunk: Write chunk to push 446 * 447 * Copy a Write chunk from the Call transport header to the 448 * Reply transport header. Update each segment's length field 449 * to reflect the number of bytes written in that segment. 450 * 451 * Return values: 452 * On success, returns length in bytes of the Reply XDR buffer 453 * that was consumed by the Write chunk 454 * %-EMSGSIZE on XDR buffer overflow 455 */ 456 static ssize_t svc_rdma_encode_write_chunk(struct svc_rdma_send_ctxt *sctxt, 457 const struct svc_rdma_chunk *chunk) 458 { 459 u32 remaining = chunk->ch_payload_length; 460 unsigned int segno; 461 ssize_t len, ret; 462 463 len = 0; 464 ret = xdr_stream_encode_item_present(&sctxt->sc_stream); 465 if (ret < 0) 466 return ret; 467 len += ret; 468 469 ret = xdr_stream_encode_u32(&sctxt->sc_stream, chunk->ch_segcount); 470 if (ret < 0) 471 return ret; 472 len += ret; 473 474 for (segno = 0; segno < chunk->ch_segcount; segno++) { 475 ret = svc_rdma_encode_write_segment(sctxt, chunk, &remaining, segno); 476 if (ret < 0) 477 return ret; 478 len += ret; 479 } 480 481 return len; 482 } 483 484 /** 485 * svc_rdma_encode_write_list - Encode RPC Reply's Write chunk list 486 * @rctxt: Reply context with information about the RPC Call 487 * @sctxt: Send context for the RPC Reply 488 * 489 * Return values: 490 * On success, returns length in bytes of the Reply XDR buffer 491 * that was consumed by the Reply's Write list 492 * %-EMSGSIZE on XDR buffer overflow 493 */ 494 static ssize_t svc_rdma_encode_write_list(struct svc_rdma_recv_ctxt *rctxt, 495 struct svc_rdma_send_ctxt *sctxt) 496 { 497 struct svc_rdma_chunk *chunk; 498 ssize_t len, ret; 499 500 len = 0; 501 pcl_for_each_chunk(chunk, &rctxt->rc_write_pcl) { 502 ret = svc_rdma_encode_write_chunk(sctxt, chunk); 503 if (ret < 0) 504 return ret; 505 len += ret; 506 } 507 508 /* Terminate the Write list */ 509 ret = xdr_stream_encode_item_absent(&sctxt->sc_stream); 510 if (ret < 0) 511 return ret; 512 513 return len + ret; 514 } 515 516 /** 517 * svc_rdma_encode_reply_chunk - Encode RPC Reply's Reply chunk 518 * @rctxt: Reply context with information about the RPC Call 519 * @sctxt: Send context for the RPC Reply 520 * @length: size in bytes of the payload in the Reply chunk 521 * 522 * Return values: 523 * On success, returns length in bytes of the Reply XDR buffer 524 * that was consumed by the Reply's Reply chunk 525 * %-EMSGSIZE on XDR buffer overflow 526 * %-E2BIG if the RPC message is larger than the Reply chunk 527 */ 528 static ssize_t 529 svc_rdma_encode_reply_chunk(struct svc_rdma_recv_ctxt *rctxt, 530 struct svc_rdma_send_ctxt *sctxt, 531 unsigned int length) 532 { 533 struct svc_rdma_chunk *chunk; 534 535 if (pcl_is_empty(&rctxt->rc_reply_pcl)) 536 return xdr_stream_encode_item_absent(&sctxt->sc_stream); 537 538 chunk = pcl_first_chunk(&rctxt->rc_reply_pcl); 539 if (length > chunk->ch_length) 540 return -E2BIG; 541 542 chunk->ch_payload_length = length; 543 return svc_rdma_encode_write_chunk(sctxt, chunk); 544 } 545 546 struct svc_rdma_map_data { 547 struct svcxprt_rdma *md_rdma; 548 struct svc_rdma_send_ctxt *md_ctxt; 549 }; 550 551 /** 552 * svc_rdma_page_dma_map - DMA map one page 553 * @data: pointer to arguments 554 * @page: struct page to DMA map 555 * @offset: offset into the page 556 * @len: number of bytes to map 557 * 558 * Returns: 559 * %0 if DMA mapping was successful 560 * %-EIO if the page cannot be DMA mapped 561 */ 562 static int svc_rdma_page_dma_map(void *data, struct page *page, 563 unsigned long offset, unsigned int len) 564 { 565 struct svc_rdma_map_data *args = data; 566 struct svcxprt_rdma *rdma = args->md_rdma; 567 struct svc_rdma_send_ctxt *ctxt = args->md_ctxt; 568 struct ib_device *dev = rdma->sc_cm_id->device; 569 dma_addr_t dma_addr; 570 571 ++ctxt->sc_cur_sge_no; 572 573 dma_addr = ib_dma_map_page(dev, page, offset, len, DMA_TO_DEVICE); 574 if (ib_dma_mapping_error(dev, dma_addr)) 575 goto out_maperr; 576 577 trace_svcrdma_dma_map_page(&ctxt->sc_cid, dma_addr, len); 578 ctxt->sc_sges[ctxt->sc_cur_sge_no].addr = dma_addr; 579 ctxt->sc_sges[ctxt->sc_cur_sge_no].length = len; 580 ctxt->sc_send_wr.num_sge++; 581 return 0; 582 583 out_maperr: 584 trace_svcrdma_dma_map_err(&ctxt->sc_cid, dma_addr, len); 585 return -EIO; 586 } 587 588 /** 589 * svc_rdma_iov_dma_map - DMA map an iovec 590 * @data: pointer to arguments 591 * @iov: kvec to DMA map 592 * 593 * ib_dma_map_page() is used here because svc_rdma_dma_unmap() 594 * handles DMA-unmap and it uses ib_dma_unmap_page() exclusively. 595 * 596 * Returns: 597 * %0 if DMA mapping was successful 598 * %-EIO if the iovec cannot be DMA mapped 599 */ 600 static int svc_rdma_iov_dma_map(void *data, const struct kvec *iov) 601 { 602 if (!iov->iov_len) 603 return 0; 604 return svc_rdma_page_dma_map(data, virt_to_page(iov->iov_base), 605 offset_in_page(iov->iov_base), 606 iov->iov_len); 607 } 608 609 /** 610 * svc_rdma_xb_dma_map - DMA map all segments of an xdr_buf 611 * @xdr: xdr_buf containing portion of an RPC message to transmit 612 * @data: pointer to arguments 613 * 614 * Returns: 615 * %0 if DMA mapping was successful 616 * %-EIO if DMA mapping failed 617 * 618 * On failure, any DMA mappings that have been already done must be 619 * unmapped by the caller. 620 */ 621 static int svc_rdma_xb_dma_map(const struct xdr_buf *xdr, void *data) 622 { 623 unsigned int len, remaining; 624 unsigned long pageoff; 625 struct page **ppages; 626 int ret; 627 628 ret = svc_rdma_iov_dma_map(data, &xdr->head[0]); 629 if (ret < 0) 630 return ret; 631 632 ppages = xdr->pages + (xdr->page_base >> PAGE_SHIFT); 633 pageoff = offset_in_page(xdr->page_base); 634 remaining = xdr->page_len; 635 while (remaining) { 636 len = min_t(u32, PAGE_SIZE - pageoff, remaining); 637 638 ret = svc_rdma_page_dma_map(data, *ppages++, pageoff, len); 639 if (ret < 0) 640 return ret; 641 642 remaining -= len; 643 pageoff = 0; 644 } 645 646 ret = svc_rdma_iov_dma_map(data, &xdr->tail[0]); 647 if (ret < 0) 648 return ret; 649 650 return xdr->len; 651 } 652 653 struct svc_rdma_pullup_data { 654 u8 *pd_dest; 655 unsigned int pd_length; 656 unsigned int pd_num_sges; 657 }; 658 659 /** 660 * svc_rdma_xb_count_sges - Count how many SGEs will be needed 661 * @xdr: xdr_buf containing portion of an RPC message to transmit 662 * @data: pointer to arguments 663 * 664 * Returns: 665 * Number of SGEs needed to Send the contents of @xdr inline 666 */ 667 static int svc_rdma_xb_count_sges(const struct xdr_buf *xdr, 668 void *data) 669 { 670 struct svc_rdma_pullup_data *args = data; 671 unsigned int remaining; 672 unsigned long offset; 673 674 if (xdr->head[0].iov_len) 675 ++args->pd_num_sges; 676 677 offset = offset_in_page(xdr->page_base); 678 remaining = xdr->page_len; 679 while (remaining) { 680 ++args->pd_num_sges; 681 remaining -= min_t(u32, PAGE_SIZE - offset, remaining); 682 offset = 0; 683 } 684 685 if (xdr->tail[0].iov_len) 686 ++args->pd_num_sges; 687 688 args->pd_length += xdr->len; 689 return 0; 690 } 691 692 /** 693 * svc_rdma_pull_up_needed - Determine whether to use pull-up 694 * @rdma: controlling transport 695 * @sctxt: send_ctxt for the Send WR 696 * @write_pcl: Write chunk list provided by client 697 * @xdr: xdr_buf containing RPC message to transmit 698 * 699 * Returns: 700 * %true if pull-up must be used 701 * %false otherwise 702 */ 703 static bool svc_rdma_pull_up_needed(const struct svcxprt_rdma *rdma, 704 const struct svc_rdma_send_ctxt *sctxt, 705 const struct svc_rdma_pcl *write_pcl, 706 const struct xdr_buf *xdr) 707 { 708 /* Resources needed for the transport header */ 709 struct svc_rdma_pullup_data args = { 710 .pd_length = sctxt->sc_hdrbuf.len, 711 .pd_num_sges = 1, 712 }; 713 int ret; 714 715 ret = pcl_process_nonpayloads(write_pcl, xdr, 716 svc_rdma_xb_count_sges, &args); 717 if (ret < 0) 718 return false; 719 720 if (args.pd_length < RPCRDMA_PULLUP_THRESH) 721 return true; 722 return args.pd_num_sges >= rdma->sc_max_send_sges; 723 } 724 725 /** 726 * svc_rdma_xb_linearize - Copy region of xdr_buf to flat buffer 727 * @xdr: xdr_buf containing portion of an RPC message to copy 728 * @data: pointer to arguments 729 * 730 * Returns: 731 * Always zero. 732 */ 733 static int svc_rdma_xb_linearize(const struct xdr_buf *xdr, 734 void *data) 735 { 736 struct svc_rdma_pullup_data *args = data; 737 unsigned int len, remaining; 738 unsigned long pageoff; 739 struct page **ppages; 740 741 if (xdr->head[0].iov_len) { 742 memcpy(args->pd_dest, xdr->head[0].iov_base, xdr->head[0].iov_len); 743 args->pd_dest += xdr->head[0].iov_len; 744 } 745 746 ppages = xdr->pages + (xdr->page_base >> PAGE_SHIFT); 747 pageoff = offset_in_page(xdr->page_base); 748 remaining = xdr->page_len; 749 while (remaining) { 750 len = min_t(u32, PAGE_SIZE - pageoff, remaining); 751 memcpy(args->pd_dest, page_address(*ppages) + pageoff, len); 752 remaining -= len; 753 args->pd_dest += len; 754 pageoff = 0; 755 ppages++; 756 } 757 758 if (xdr->tail[0].iov_len) { 759 memcpy(args->pd_dest, xdr->tail[0].iov_base, xdr->tail[0].iov_len); 760 args->pd_dest += xdr->tail[0].iov_len; 761 } 762 763 args->pd_length += xdr->len; 764 return 0; 765 } 766 767 /** 768 * svc_rdma_pull_up_reply_msg - Copy Reply into a single buffer 769 * @rdma: controlling transport 770 * @sctxt: send_ctxt for the Send WR; xprt hdr is already prepared 771 * @write_pcl: Write chunk list provided by client 772 * @xdr: prepared xdr_buf containing RPC message 773 * 774 * The device is not capable of sending the reply directly. 775 * Assemble the elements of @xdr into the transport header buffer. 776 * 777 * Assumptions: 778 * pull_up_needed has determined that @xdr will fit in the buffer. 779 * 780 * Returns: 781 * %0 if pull-up was successful 782 * %-EMSGSIZE if a buffer manipulation problem occurred 783 */ 784 static int svc_rdma_pull_up_reply_msg(const struct svcxprt_rdma *rdma, 785 struct svc_rdma_send_ctxt *sctxt, 786 const struct svc_rdma_pcl *write_pcl, 787 const struct xdr_buf *xdr) 788 { 789 struct svc_rdma_pullup_data args = { 790 .pd_dest = sctxt->sc_xprt_buf + sctxt->sc_hdrbuf.len, 791 }; 792 int ret; 793 794 ret = pcl_process_nonpayloads(write_pcl, xdr, 795 svc_rdma_xb_linearize, &args); 796 if (ret < 0) 797 return ret; 798 799 sctxt->sc_sges[0].length = sctxt->sc_hdrbuf.len + args.pd_length; 800 trace_svcrdma_send_pullup(sctxt, args.pd_length); 801 return 0; 802 } 803 804 /* svc_rdma_map_reply_msg - DMA map the buffer holding RPC message 805 * @rdma: controlling transport 806 * @sctxt: send_ctxt for the Send WR 807 * @write_pcl: Write chunk list provided by client 808 * @reply_pcl: Reply chunk provided by client 809 * @xdr: prepared xdr_buf containing RPC message 810 * 811 * Returns: 812 * %0 if DMA mapping was successful. 813 * %-EMSGSIZE if a buffer manipulation problem occurred 814 * %-EIO if DMA mapping failed 815 * 816 * The Send WR's num_sge field is set in all cases. 817 */ 818 int svc_rdma_map_reply_msg(struct svcxprt_rdma *rdma, 819 struct svc_rdma_send_ctxt *sctxt, 820 const struct svc_rdma_pcl *write_pcl, 821 const struct svc_rdma_pcl *reply_pcl, 822 const struct xdr_buf *xdr) 823 { 824 struct svc_rdma_map_data args = { 825 .md_rdma = rdma, 826 .md_ctxt = sctxt, 827 }; 828 829 /* Set up the (persistently-mapped) transport header SGE. */ 830 sctxt->sc_send_wr.num_sge = 1; 831 sctxt->sc_sges[0].length = sctxt->sc_hdrbuf.len; 832 833 /* If there is a Reply chunk, nothing follows the transport 834 * header, so there is nothing to map. 835 */ 836 if (!pcl_is_empty(reply_pcl)) 837 return 0; 838 839 /* For pull-up, svc_rdma_send() will sync the transport header. 840 * No additional DMA mapping is necessary. 841 */ 842 if (svc_rdma_pull_up_needed(rdma, sctxt, write_pcl, xdr)) 843 return svc_rdma_pull_up_reply_msg(rdma, sctxt, write_pcl, xdr); 844 845 return pcl_process_nonpayloads(write_pcl, xdr, 846 svc_rdma_xb_dma_map, &args); 847 } 848 849 /* The svc_rqst and all resources it owns are released as soon as 850 * svc_rdma_sendto returns. Transfer pages under I/O to the ctxt 851 * so they are released by the Send completion handler. 852 */ 853 static void svc_rdma_save_io_pages(struct svc_rqst *rqstp, 854 struct svc_rdma_send_ctxt *ctxt) 855 { 856 int i, pages = rqstp->rq_next_page - rqstp->rq_respages; 857 858 ctxt->sc_page_count += pages; 859 for (i = 0; i < pages; i++) { 860 ctxt->sc_pages[i] = rqstp->rq_respages[i]; 861 rqstp->rq_respages[i] = NULL; 862 } 863 864 /* Prevent svc_xprt_release from releasing pages in rq_pages */ 865 rqstp->rq_next_page = rqstp->rq_respages; 866 } 867 868 /* Prepare the portion of the RPC Reply that will be transmitted 869 * via RDMA Send. The RPC-over-RDMA transport header is prepared 870 * in sc_sges[0], and the RPC xdr_buf is prepared in following sges. 871 * 872 * Depending on whether a Write list or Reply chunk is present, 873 * the server may Send all, a portion of, or none of the xdr_buf. 874 * In the latter case, only the transport header (sc_sges[0]) is 875 * transmitted. 876 * 877 * Assumptions: 878 * - The Reply's transport header will never be larger than a page. 879 */ 880 static int svc_rdma_send_reply_msg(struct svcxprt_rdma *rdma, 881 struct svc_rdma_send_ctxt *sctxt, 882 const struct svc_rdma_recv_ctxt *rctxt, 883 struct svc_rqst *rqstp) 884 { 885 struct ib_send_wr *send_wr = &sctxt->sc_send_wr; 886 int ret; 887 888 ret = svc_rdma_map_reply_msg(rdma, sctxt, &rctxt->rc_write_pcl, 889 &rctxt->rc_reply_pcl, &rqstp->rq_res); 890 if (ret < 0) 891 return ret; 892 893 /* Transfer pages involved in RDMA Writes to the sctxt's 894 * page array. Completion handling releases these pages. 895 */ 896 svc_rdma_save_io_pages(rqstp, sctxt); 897 898 if (rctxt->rc_inv_rkey) { 899 send_wr->opcode = IB_WR_SEND_WITH_INV; 900 send_wr->ex.invalidate_rkey = rctxt->rc_inv_rkey; 901 } else { 902 send_wr->opcode = IB_WR_SEND; 903 } 904 905 return svc_rdma_post_send(rdma, sctxt); 906 } 907 908 /** 909 * svc_rdma_send_error_msg - Send an RPC/RDMA v1 error response 910 * @rdma: controlling transport context 911 * @sctxt: Send context for the response 912 * @rctxt: Receive context for incoming bad message 913 * @status: negative errno indicating error that occurred 914 * 915 * Given the client-provided Read, Write, and Reply chunks, the 916 * server was not able to parse the Call or form a complete Reply. 917 * Return an RDMA_ERROR message so the client can retire the RPC 918 * transaction. 919 * 920 * The caller does not have to release @sctxt. It is released by 921 * Send completion, or by this function on error. 922 */ 923 void svc_rdma_send_error_msg(struct svcxprt_rdma *rdma, 924 struct svc_rdma_send_ctxt *sctxt, 925 struct svc_rdma_recv_ctxt *rctxt, 926 int status) 927 { 928 __be32 *rdma_argp = rctxt->rc_recv_buf; 929 __be32 *p; 930 931 rpcrdma_set_xdrlen(&sctxt->sc_hdrbuf, 0); 932 xdr_init_encode(&sctxt->sc_stream, &sctxt->sc_hdrbuf, 933 sctxt->sc_xprt_buf, NULL); 934 935 p = xdr_reserve_space(&sctxt->sc_stream, 936 rpcrdma_fixed_maxsz * sizeof(*p)); 937 if (!p) 938 goto put_ctxt; 939 940 *p++ = *rdma_argp; 941 *p++ = *(rdma_argp + 1); 942 *p++ = rdma->sc_fc_credits; 943 *p = rdma_error; 944 945 switch (status) { 946 case -EPROTONOSUPPORT: 947 p = xdr_reserve_space(&sctxt->sc_stream, 3 * sizeof(*p)); 948 if (!p) 949 goto put_ctxt; 950 951 *p++ = err_vers; 952 *p++ = rpcrdma_version; 953 *p = rpcrdma_version; 954 trace_svcrdma_err_vers(*rdma_argp); 955 break; 956 default: 957 p = xdr_reserve_space(&sctxt->sc_stream, sizeof(*p)); 958 if (!p) 959 goto put_ctxt; 960 961 *p = err_chunk; 962 trace_svcrdma_err_chunk(*rdma_argp); 963 } 964 965 /* Remote Invalidation is skipped for simplicity. */ 966 sctxt->sc_send_wr.num_sge = 1; 967 sctxt->sc_send_wr.opcode = IB_WR_SEND; 968 sctxt->sc_sges[0].length = sctxt->sc_hdrbuf.len; 969 if (svc_rdma_post_send(rdma, sctxt)) 970 goto put_ctxt; 971 return; 972 973 put_ctxt: 974 svc_rdma_send_ctxt_put(rdma, sctxt); 975 } 976 977 /** 978 * svc_rdma_sendto - Transmit an RPC reply 979 * @rqstp: processed RPC request, reply XDR already in ::rq_res 980 * 981 * Any resources still associated with @rqstp are released upon return. 982 * If no reply message was possible, the connection is closed. 983 * 984 * Returns: 985 * %0 if an RPC reply has been successfully posted, 986 * %-ENOMEM if a resource shortage occurred (connection is lost), 987 * %-ENOTCONN if posting failed (connection is lost). 988 */ 989 int svc_rdma_sendto(struct svc_rqst *rqstp) 990 { 991 struct svc_xprt *xprt = rqstp->rq_xprt; 992 struct svcxprt_rdma *rdma = 993 container_of(xprt, struct svcxprt_rdma, sc_xprt); 994 struct svc_rdma_recv_ctxt *rctxt = rqstp->rq_xprt_ctxt; 995 __be32 *rdma_argp = rctxt->rc_recv_buf; 996 struct svc_rdma_send_ctxt *sctxt; 997 unsigned int rc_size; 998 __be32 *p; 999 int ret; 1000 1001 ret = -ENOTCONN; 1002 if (svc_xprt_is_dead(xprt)) 1003 goto drop_connection; 1004 1005 ret = -ENOMEM; 1006 sctxt = svc_rdma_send_ctxt_get(rdma); 1007 if (!sctxt) 1008 goto drop_connection; 1009 1010 ret = -EMSGSIZE; 1011 p = xdr_reserve_space(&sctxt->sc_stream, 1012 rpcrdma_fixed_maxsz * sizeof(*p)); 1013 if (!p) 1014 goto put_ctxt; 1015 1016 ret = svc_rdma_send_write_list(rdma, rctxt, &rqstp->rq_res); 1017 if (ret < 0) 1018 goto put_ctxt; 1019 1020 rc_size = 0; 1021 if (!pcl_is_empty(&rctxt->rc_reply_pcl)) { 1022 ret = svc_rdma_prepare_reply_chunk(rdma, &rctxt->rc_write_pcl, 1023 &rctxt->rc_reply_pcl, sctxt, 1024 &rqstp->rq_res); 1025 if (ret < 0) 1026 goto reply_chunk; 1027 rc_size = ret; 1028 } 1029 1030 *p++ = *rdma_argp; 1031 *p++ = *(rdma_argp + 1); 1032 *p++ = rdma->sc_fc_credits; 1033 *p = pcl_is_empty(&rctxt->rc_reply_pcl) ? rdma_msg : rdma_nomsg; 1034 1035 ret = svc_rdma_encode_read_list(sctxt); 1036 if (ret < 0) 1037 goto put_ctxt; 1038 ret = svc_rdma_encode_write_list(rctxt, sctxt); 1039 if (ret < 0) 1040 goto put_ctxt; 1041 ret = svc_rdma_encode_reply_chunk(rctxt, sctxt, rc_size); 1042 if (ret < 0) 1043 goto put_ctxt; 1044 1045 ret = svc_rdma_send_reply_msg(rdma, sctxt, rctxt, rqstp); 1046 if (ret < 0) 1047 goto put_ctxt; 1048 return 0; 1049 1050 reply_chunk: 1051 if (ret != -E2BIG && ret != -EINVAL) 1052 goto put_ctxt; 1053 1054 /* Send completion releases payload pages that were part 1055 * of previously posted RDMA Writes. 1056 */ 1057 svc_rdma_save_io_pages(rqstp, sctxt); 1058 svc_rdma_send_error_msg(rdma, sctxt, rctxt, ret); 1059 return 0; 1060 1061 put_ctxt: 1062 svc_rdma_send_ctxt_put(rdma, sctxt); 1063 drop_connection: 1064 trace_svcrdma_send_err(rqstp, ret); 1065 svc_xprt_deferred_close(&rdma->sc_xprt); 1066 return -ENOTCONN; 1067 } 1068 1069 /** 1070 * svc_rdma_result_payload - special processing for a result payload 1071 * @rqstp: RPC transaction context 1072 * @offset: payload's byte offset in @rqstp->rq_res 1073 * @length: size of payload, in bytes 1074 * 1075 * Assign the passed-in result payload to the current Write chunk, 1076 * and advance to cur_result_payload to the next Write chunk, if 1077 * there is one. 1078 * 1079 * Return values: 1080 * %0 if successful or nothing needed to be done 1081 * %-E2BIG if the payload was larger than the Write chunk 1082 */ 1083 int svc_rdma_result_payload(struct svc_rqst *rqstp, unsigned int offset, 1084 unsigned int length) 1085 { 1086 struct svc_rdma_recv_ctxt *rctxt = rqstp->rq_xprt_ctxt; 1087 struct svc_rdma_chunk *chunk; 1088 1089 chunk = rctxt->rc_cur_result_payload; 1090 if (!length || !chunk) 1091 return 0; 1092 rctxt->rc_cur_result_payload = 1093 pcl_next_chunk(&rctxt->rc_write_pcl, chunk); 1094 1095 if (length > chunk->ch_length) 1096 return -E2BIG; 1097 chunk->ch_position = offset; 1098 chunk->ch_payload_length = length; 1099 return 0; 1100 } 1101