1 /* 2 * BSS client mode implementation 3 * Copyright 2003-2008, Jouni Malinen <j@w1.fi> 4 * Copyright 2004, Instant802 Networks, Inc. 5 * Copyright 2005, Devicescape Software, Inc. 6 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> 7 * Copyright 2007, Michael Wu <flamingice@sourmilk.net> 8 * Copyright 2013-2014 Intel Mobile Communications GmbH 9 * Copyright (C) 2015 - 2017 Intel Deutschland GmbH 10 * Copyright (C) 2018 - 2019 Intel Corporation 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of the GNU General Public License version 2 as 14 * published by the Free Software Foundation. 15 */ 16 17 #include <linux/delay.h> 18 #include <linux/if_ether.h> 19 #include <linux/skbuff.h> 20 #include <linux/if_arp.h> 21 #include <linux/etherdevice.h> 22 #include <linux/moduleparam.h> 23 #include <linux/rtnetlink.h> 24 #include <linux/crc32.h> 25 #include <linux/slab.h> 26 #include <linux/export.h> 27 #include <net/mac80211.h> 28 #include <asm/unaligned.h> 29 30 #include "ieee80211_i.h" 31 #include "driver-ops.h" 32 #include "rate.h" 33 #include "led.h" 34 #include "fils_aead.h" 35 36 #define IEEE80211_AUTH_TIMEOUT (HZ / 5) 37 #define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2) 38 #define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10) 39 #define IEEE80211_AUTH_TIMEOUT_SAE (HZ * 2) 40 #define IEEE80211_AUTH_MAX_TRIES 3 41 #define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5) 42 #define IEEE80211_ASSOC_TIMEOUT (HZ / 5) 43 #define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2) 44 #define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10) 45 #define IEEE80211_ASSOC_MAX_TRIES 3 46 47 static int max_nullfunc_tries = 2; 48 module_param(max_nullfunc_tries, int, 0644); 49 MODULE_PARM_DESC(max_nullfunc_tries, 50 "Maximum nullfunc tx tries before disconnecting (reason 4)."); 51 52 static int max_probe_tries = 5; 53 module_param(max_probe_tries, int, 0644); 54 MODULE_PARM_DESC(max_probe_tries, 55 "Maximum probe tries before disconnecting (reason 4)."); 56 57 /* 58 * Beacon loss timeout is calculated as N frames times the 59 * advertised beacon interval. This may need to be somewhat 60 * higher than what hardware might detect to account for 61 * delays in the host processing frames. But since we also 62 * probe on beacon miss before declaring the connection lost 63 * default to what we want. 64 */ 65 static int beacon_loss_count = 7; 66 module_param(beacon_loss_count, int, 0644); 67 MODULE_PARM_DESC(beacon_loss_count, 68 "Number of beacon intervals before we decide beacon was lost."); 69 70 /* 71 * Time the connection can be idle before we probe 72 * it to see if we can still talk to the AP. 73 */ 74 #define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ) 75 /* 76 * Time we wait for a probe response after sending 77 * a probe request because of beacon loss or for 78 * checking the connection still works. 79 */ 80 static int probe_wait_ms = 500; 81 module_param(probe_wait_ms, int, 0644); 82 MODULE_PARM_DESC(probe_wait_ms, 83 "Maximum time(ms) to wait for probe response" 84 " before disconnecting (reason 4)."); 85 86 /* 87 * How many Beacon frames need to have been used in average signal strength 88 * before starting to indicate signal change events. 89 */ 90 #define IEEE80211_SIGNAL_AVE_MIN_COUNT 4 91 92 /* 93 * We can have multiple work items (and connection probing) 94 * scheduling this timer, but we need to take care to only 95 * reschedule it when it should fire _earlier_ than it was 96 * asked for before, or if it's not pending right now. This 97 * function ensures that. Note that it then is required to 98 * run this function for all timeouts after the first one 99 * has happened -- the work that runs from this timer will 100 * do that. 101 */ 102 static void run_again(struct ieee80211_sub_if_data *sdata, 103 unsigned long timeout) 104 { 105 sdata_assert_lock(sdata); 106 107 if (!timer_pending(&sdata->u.mgd.timer) || 108 time_before(timeout, sdata->u.mgd.timer.expires)) 109 mod_timer(&sdata->u.mgd.timer, timeout); 110 } 111 112 void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata) 113 { 114 if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER) 115 return; 116 117 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) 118 return; 119 120 mod_timer(&sdata->u.mgd.bcn_mon_timer, 121 round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout)); 122 } 123 124 void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata) 125 { 126 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 127 128 if (unlikely(!ifmgd->associated)) 129 return; 130 131 if (ifmgd->probe_send_count) 132 ifmgd->probe_send_count = 0; 133 134 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) 135 return; 136 137 mod_timer(&ifmgd->conn_mon_timer, 138 round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME)); 139 } 140 141 static int ecw2cw(int ecw) 142 { 143 return (1 << ecw) - 1; 144 } 145 146 static u32 147 ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, 148 struct ieee80211_supported_band *sband, 149 struct ieee80211_channel *channel, 150 const struct ieee80211_ht_operation *ht_oper, 151 const struct ieee80211_vht_operation *vht_oper, 152 const struct ieee80211_he_operation *he_oper, 153 struct cfg80211_chan_def *chandef, bool tracking) 154 { 155 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 156 struct cfg80211_chan_def vht_chandef; 157 struct ieee80211_sta_ht_cap sta_ht_cap; 158 u32 ht_cfreq, ret; 159 160 memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap)); 161 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap); 162 163 chandef->chan = channel; 164 chandef->width = NL80211_CHAN_WIDTH_20_NOHT; 165 chandef->center_freq1 = channel->center_freq; 166 chandef->center_freq2 = 0; 167 168 if (!ht_oper || !sta_ht_cap.ht_supported) { 169 ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; 170 goto out; 171 } 172 173 chandef->width = NL80211_CHAN_WIDTH_20; 174 175 ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan, 176 channel->band); 177 /* check that channel matches the right operating channel */ 178 if (!tracking && channel->center_freq != ht_cfreq) { 179 /* 180 * It's possible that some APs are confused here; 181 * Netgear WNDR3700 sometimes reports 4 higher than 182 * the actual channel in association responses, but 183 * since we look at probe response/beacon data here 184 * it should be OK. 185 */ 186 sdata_info(sdata, 187 "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", 188 channel->center_freq, ht_cfreq, 189 ht_oper->primary_chan, channel->band); 190 ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; 191 goto out; 192 } 193 194 /* check 40 MHz support, if we have it */ 195 if (sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { 196 ieee80211_chandef_ht_oper(ht_oper, chandef); 197 } else { 198 /* 40 MHz (and 80 MHz) must be supported for VHT */ 199 ret = IEEE80211_STA_DISABLE_VHT; 200 /* also mark 40 MHz disabled */ 201 ret |= IEEE80211_STA_DISABLE_40MHZ; 202 goto out; 203 } 204 205 if (!vht_oper || !sband->vht_cap.vht_supported) { 206 ret = IEEE80211_STA_DISABLE_VHT; 207 goto out; 208 } 209 210 vht_chandef = *chandef; 211 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE) && he_oper && 212 (le32_to_cpu(he_oper->he_oper_params) & 213 IEEE80211_HE_OPERATION_VHT_OPER_INFO)) { 214 struct ieee80211_vht_operation he_oper_vht_cap; 215 216 /* 217 * Set only first 3 bytes (other 2 aren't used in 218 * ieee80211_chandef_vht_oper() anyway) 219 */ 220 memcpy(&he_oper_vht_cap, he_oper->optional, 3); 221 he_oper_vht_cap.basic_mcs_set = cpu_to_le16(0); 222 223 if (!ieee80211_chandef_vht_oper(&sdata->local->hw, 224 &he_oper_vht_cap, ht_oper, 225 &vht_chandef)) { 226 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE)) 227 sdata_info(sdata, 228 "HE AP VHT information is invalid, disable HE\n"); 229 ret = IEEE80211_STA_DISABLE_HE; 230 goto out; 231 } 232 } else if (!ieee80211_chandef_vht_oper(&sdata->local->hw, vht_oper, 233 ht_oper, &vht_chandef)) { 234 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) 235 sdata_info(sdata, 236 "AP VHT information is invalid, disable VHT\n"); 237 ret = IEEE80211_STA_DISABLE_VHT; 238 goto out; 239 } 240 241 if (!cfg80211_chandef_valid(&vht_chandef)) { 242 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) 243 sdata_info(sdata, 244 "AP VHT information is invalid, disable VHT\n"); 245 ret = IEEE80211_STA_DISABLE_VHT; 246 goto out; 247 } 248 249 if (cfg80211_chandef_identical(chandef, &vht_chandef)) { 250 ret = 0; 251 goto out; 252 } 253 254 if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) { 255 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) 256 sdata_info(sdata, 257 "AP VHT information doesn't match HT, disable VHT\n"); 258 ret = IEEE80211_STA_DISABLE_VHT; 259 goto out; 260 } 261 262 *chandef = vht_chandef; 263 264 ret = 0; 265 266 out: 267 /* 268 * When tracking the current AP, don't do any further checks if the 269 * new chandef is identical to the one we're currently using for the 270 * connection. This keeps us from playing ping-pong with regulatory, 271 * without it the following can happen (for example): 272 * - connect to an AP with 80 MHz, world regdom allows 80 MHz 273 * - AP advertises regdom US 274 * - CRDA loads regdom US with 80 MHz prohibited (old database) 275 * - the code below detects an unsupported channel, downgrades, and 276 * we disconnect from the AP in the caller 277 * - disconnect causes CRDA to reload world regdomain and the game 278 * starts anew. 279 * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881) 280 * 281 * It seems possible that there are still scenarios with CSA or real 282 * bandwidth changes where a this could happen, but those cases are 283 * less common and wouldn't completely prevent using the AP. 284 */ 285 if (tracking && 286 cfg80211_chandef_identical(chandef, &sdata->vif.bss_conf.chandef)) 287 return ret; 288 289 /* don't print the message below for VHT mismatch if VHT is disabled */ 290 if (ret & IEEE80211_STA_DISABLE_VHT) 291 vht_chandef = *chandef; 292 293 /* 294 * Ignore the DISABLED flag when we're already connected and only 295 * tracking the APs beacon for bandwidth changes - otherwise we 296 * might get disconnected here if we connect to an AP, update our 297 * regulatory information based on the AP's country IE and the 298 * information we have is wrong/outdated and disables the channel 299 * that we're actually using for the connection to the AP. 300 */ 301 while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, 302 tracking ? 0 : 303 IEEE80211_CHAN_DISABLED)) { 304 if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) { 305 ret = IEEE80211_STA_DISABLE_HT | 306 IEEE80211_STA_DISABLE_VHT; 307 break; 308 } 309 310 ret |= ieee80211_chandef_downgrade(chandef); 311 } 312 313 if (chandef->width != vht_chandef.width && !tracking) 314 sdata_info(sdata, 315 "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n"); 316 317 WARN_ON_ONCE(!cfg80211_chandef_valid(chandef)); 318 return ret; 319 } 320 321 static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata, 322 struct sta_info *sta, 323 const struct ieee80211_ht_cap *ht_cap, 324 const struct ieee80211_ht_operation *ht_oper, 325 const struct ieee80211_vht_operation *vht_oper, 326 const struct ieee80211_he_operation *he_oper, 327 const u8 *bssid, u32 *changed) 328 { 329 struct ieee80211_local *local = sdata->local; 330 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 331 struct ieee80211_channel *chan = sdata->vif.bss_conf.chandef.chan; 332 struct ieee80211_supported_band *sband = 333 local->hw.wiphy->bands[chan->band]; 334 struct cfg80211_chan_def chandef; 335 u16 ht_opmode; 336 u32 flags; 337 enum ieee80211_sta_rx_bandwidth new_sta_bw; 338 int ret; 339 340 /* if HT was/is disabled, don't track any bandwidth changes */ 341 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || !ht_oper) 342 return 0; 343 344 /* don't check VHT if we associated as non-VHT station */ 345 if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT) 346 vht_oper = NULL; 347 348 /* don't check HE if we associated as non-HE station */ 349 if (ifmgd->flags & IEEE80211_STA_DISABLE_HE || 350 !ieee80211_get_he_sta_cap(sband)) 351 he_oper = NULL; 352 353 if (WARN_ON_ONCE(!sta)) 354 return -EINVAL; 355 356 /* 357 * if bss configuration changed store the new one - 358 * this may be applicable even if channel is identical 359 */ 360 ht_opmode = le16_to_cpu(ht_oper->operation_mode); 361 if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) { 362 *changed |= BSS_CHANGED_HT; 363 sdata->vif.bss_conf.ht_operation_mode = ht_opmode; 364 } 365 366 /* calculate new channel (type) based on HT/VHT/HE operation IEs */ 367 flags = ieee80211_determine_chantype(sdata, sband, chan, 368 ht_oper, vht_oper, he_oper, 369 &chandef, true); 370 371 /* 372 * Downgrade the new channel if we associated with restricted 373 * capabilities. For example, if we associated as a 20 MHz STA 374 * to a 40 MHz AP (due to regulatory, capabilities or config 375 * reasons) then switching to a 40 MHz channel now won't do us 376 * any good -- we couldn't use it with the AP. 377 */ 378 if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ && 379 chandef.width == NL80211_CHAN_WIDTH_80P80) 380 flags |= ieee80211_chandef_downgrade(&chandef); 381 if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ && 382 chandef.width == NL80211_CHAN_WIDTH_160) 383 flags |= ieee80211_chandef_downgrade(&chandef); 384 if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ && 385 chandef.width > NL80211_CHAN_WIDTH_20) 386 flags |= ieee80211_chandef_downgrade(&chandef); 387 388 if (cfg80211_chandef_identical(&chandef, &sdata->vif.bss_conf.chandef)) 389 return 0; 390 391 sdata_info(sdata, 392 "AP %pM changed bandwidth, new config is %d MHz, width %d (%d/%d MHz)\n", 393 ifmgd->bssid, chandef.chan->center_freq, chandef.width, 394 chandef.center_freq1, chandef.center_freq2); 395 396 if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT | 397 IEEE80211_STA_DISABLE_VHT | 398 IEEE80211_STA_DISABLE_40MHZ | 399 IEEE80211_STA_DISABLE_80P80MHZ | 400 IEEE80211_STA_DISABLE_160MHZ)) || 401 !cfg80211_chandef_valid(&chandef)) { 402 sdata_info(sdata, 403 "AP %pM changed bandwidth in a way we can't support - disconnect\n", 404 ifmgd->bssid); 405 return -EINVAL; 406 } 407 408 switch (chandef.width) { 409 case NL80211_CHAN_WIDTH_20_NOHT: 410 case NL80211_CHAN_WIDTH_20: 411 new_sta_bw = IEEE80211_STA_RX_BW_20; 412 break; 413 case NL80211_CHAN_WIDTH_40: 414 new_sta_bw = IEEE80211_STA_RX_BW_40; 415 break; 416 case NL80211_CHAN_WIDTH_80: 417 new_sta_bw = IEEE80211_STA_RX_BW_80; 418 break; 419 case NL80211_CHAN_WIDTH_80P80: 420 case NL80211_CHAN_WIDTH_160: 421 new_sta_bw = IEEE80211_STA_RX_BW_160; 422 break; 423 default: 424 return -EINVAL; 425 } 426 427 if (new_sta_bw > sta->cur_max_bandwidth) 428 new_sta_bw = sta->cur_max_bandwidth; 429 430 if (new_sta_bw < sta->sta.bandwidth) { 431 sta->sta.bandwidth = new_sta_bw; 432 rate_control_rate_update(local, sband, sta, 433 IEEE80211_RC_BW_CHANGED); 434 } 435 436 ret = ieee80211_vif_change_bandwidth(sdata, &chandef, changed); 437 if (ret) { 438 sdata_info(sdata, 439 "AP %pM changed bandwidth to incompatible one - disconnect\n", 440 ifmgd->bssid); 441 return ret; 442 } 443 444 if (new_sta_bw > sta->sta.bandwidth) { 445 sta->sta.bandwidth = new_sta_bw; 446 rate_control_rate_update(local, sband, sta, 447 IEEE80211_RC_BW_CHANGED); 448 } 449 450 return 0; 451 } 452 453 /* frame sending functions */ 454 455 static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata, 456 struct sk_buff *skb, u8 ap_ht_param, 457 struct ieee80211_supported_band *sband, 458 struct ieee80211_channel *channel, 459 enum ieee80211_smps_mode smps) 460 { 461 u8 *pos; 462 u32 flags = channel->flags; 463 u16 cap; 464 struct ieee80211_sta_ht_cap ht_cap; 465 466 BUILD_BUG_ON(sizeof(ht_cap) != sizeof(sband->ht_cap)); 467 468 memcpy(&ht_cap, &sband->ht_cap, sizeof(ht_cap)); 469 ieee80211_apply_htcap_overrides(sdata, &ht_cap); 470 471 /* determine capability flags */ 472 cap = ht_cap.cap; 473 474 switch (ap_ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { 475 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: 476 if (flags & IEEE80211_CHAN_NO_HT40PLUS) { 477 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; 478 cap &= ~IEEE80211_HT_CAP_SGI_40; 479 } 480 break; 481 case IEEE80211_HT_PARAM_CHA_SEC_BELOW: 482 if (flags & IEEE80211_CHAN_NO_HT40MINUS) { 483 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; 484 cap &= ~IEEE80211_HT_CAP_SGI_40; 485 } 486 break; 487 } 488 489 /* 490 * If 40 MHz was disabled associate as though we weren't 491 * capable of 40 MHz -- some broken APs will never fall 492 * back to trying to transmit in 20 MHz. 493 */ 494 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_40MHZ) { 495 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; 496 cap &= ~IEEE80211_HT_CAP_SGI_40; 497 } 498 499 /* set SM PS mode properly */ 500 cap &= ~IEEE80211_HT_CAP_SM_PS; 501 switch (smps) { 502 case IEEE80211_SMPS_AUTOMATIC: 503 case IEEE80211_SMPS_NUM_MODES: 504 WARN_ON(1); 505 /* fall through */ 506 case IEEE80211_SMPS_OFF: 507 cap |= WLAN_HT_CAP_SM_PS_DISABLED << 508 IEEE80211_HT_CAP_SM_PS_SHIFT; 509 break; 510 case IEEE80211_SMPS_STATIC: 511 cap |= WLAN_HT_CAP_SM_PS_STATIC << 512 IEEE80211_HT_CAP_SM_PS_SHIFT; 513 break; 514 case IEEE80211_SMPS_DYNAMIC: 515 cap |= WLAN_HT_CAP_SM_PS_DYNAMIC << 516 IEEE80211_HT_CAP_SM_PS_SHIFT; 517 break; 518 } 519 520 /* reserve and fill IE */ 521 pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2); 522 ieee80211_ie_build_ht_cap(pos, &ht_cap, cap); 523 } 524 525 /* This function determines vht capability flags for the association 526 * and builds the IE. 527 * Note - the function may set the owner of the MU-MIMO capability 528 */ 529 static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata, 530 struct sk_buff *skb, 531 struct ieee80211_supported_band *sband, 532 struct ieee80211_vht_cap *ap_vht_cap) 533 { 534 struct ieee80211_local *local = sdata->local; 535 u8 *pos; 536 u32 cap; 537 struct ieee80211_sta_vht_cap vht_cap; 538 u32 mask, ap_bf_sts, our_bf_sts; 539 540 BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap)); 541 542 memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap)); 543 ieee80211_apply_vhtcap_overrides(sdata, &vht_cap); 544 545 /* determine capability flags */ 546 cap = vht_cap.cap; 547 548 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_80P80MHZ) { 549 u32 bw = cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; 550 551 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; 552 if (bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ || 553 bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) 554 cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ; 555 } 556 557 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_160MHZ) { 558 cap &= ~IEEE80211_VHT_CAP_SHORT_GI_160; 559 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; 560 } 561 562 /* 563 * Some APs apparently get confused if our capabilities are better 564 * than theirs, so restrict what we advertise in the assoc request. 565 */ 566 if (!(ap_vht_cap->vht_cap_info & 567 cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE))) 568 cap &= ~(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | 569 IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE); 570 else if (!(ap_vht_cap->vht_cap_info & 571 cpu_to_le32(IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE))) 572 cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE; 573 574 /* 575 * If some other vif is using the MU-MIMO capablity we cannot associate 576 * using MU-MIMO - this will lead to contradictions in the group-id 577 * mechanism. 578 * Ownership is defined since association request, in order to avoid 579 * simultaneous associations with MU-MIMO. 580 */ 581 if (cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) { 582 bool disable_mu_mimo = false; 583 struct ieee80211_sub_if_data *other; 584 585 list_for_each_entry_rcu(other, &local->interfaces, list) { 586 if (other->vif.mu_mimo_owner) { 587 disable_mu_mimo = true; 588 break; 589 } 590 } 591 if (disable_mu_mimo) 592 cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE; 593 else 594 sdata->vif.mu_mimo_owner = true; 595 } 596 597 mask = IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK; 598 599 ap_bf_sts = le32_to_cpu(ap_vht_cap->vht_cap_info) & mask; 600 our_bf_sts = cap & mask; 601 602 if (ap_bf_sts < our_bf_sts) { 603 cap &= ~mask; 604 cap |= ap_bf_sts; 605 } 606 607 /* reserve and fill IE */ 608 pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2); 609 ieee80211_ie_build_vht_cap(pos, &vht_cap, cap); 610 } 611 612 /* This function determines HE capability flags for the association 613 * and builds the IE. 614 */ 615 static void ieee80211_add_he_ie(struct ieee80211_sub_if_data *sdata, 616 struct sk_buff *skb, 617 struct ieee80211_supported_band *sband) 618 { 619 u8 *pos; 620 const struct ieee80211_sta_he_cap *he_cap = NULL; 621 u8 he_cap_size; 622 623 he_cap = ieee80211_get_he_sta_cap(sband); 624 if (!he_cap) 625 return; 626 627 /* 628 * TODO: the 1 added is because this temporarily is under the EXTENSION 629 * IE. Get rid of it when it moves. 630 */ 631 he_cap_size = 632 2 + 1 + sizeof(he_cap->he_cap_elem) + 633 ieee80211_he_mcs_nss_size(&he_cap->he_cap_elem) + 634 ieee80211_he_ppe_size(he_cap->ppe_thres[0], 635 he_cap->he_cap_elem.phy_cap_info); 636 pos = skb_put(skb, he_cap_size); 637 ieee80211_ie_build_he_cap(pos, he_cap, pos + he_cap_size); 638 } 639 640 static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) 641 { 642 struct ieee80211_local *local = sdata->local; 643 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 644 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; 645 struct sk_buff *skb; 646 struct ieee80211_mgmt *mgmt; 647 u8 *pos, qos_info, *ie_start; 648 size_t offset = 0, noffset; 649 int i, count, rates_len, supp_rates_len, shift; 650 u16 capab; 651 struct ieee80211_supported_band *sband; 652 struct ieee80211_chanctx_conf *chanctx_conf; 653 struct ieee80211_channel *chan; 654 u32 rates = 0; 655 656 sdata_assert_lock(sdata); 657 658 rcu_read_lock(); 659 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); 660 if (WARN_ON(!chanctx_conf)) { 661 rcu_read_unlock(); 662 return; 663 } 664 chan = chanctx_conf->def.chan; 665 rcu_read_unlock(); 666 sband = local->hw.wiphy->bands[chan->band]; 667 shift = ieee80211_vif_get_shift(&sdata->vif); 668 669 if (assoc_data->supp_rates_len) { 670 /* 671 * Get all rates supported by the device and the AP as 672 * some APs don't like getting a superset of their rates 673 * in the association request (e.g. D-Link DAP 1353 in 674 * b-only mode)... 675 */ 676 rates_len = ieee80211_parse_bitrates(&chanctx_conf->def, sband, 677 assoc_data->supp_rates, 678 assoc_data->supp_rates_len, 679 &rates); 680 } else { 681 /* 682 * In case AP not provide any supported rates information 683 * before association, we send information element(s) with 684 * all rates that we support. 685 */ 686 rates_len = 0; 687 for (i = 0; i < sband->n_bitrates; i++) { 688 rates |= BIT(i); 689 rates_len++; 690 } 691 } 692 693 skb = alloc_skb(local->hw.extra_tx_headroom + 694 sizeof(*mgmt) + /* bit too much but doesn't matter */ 695 2 + assoc_data->ssid_len + /* SSID */ 696 4 + rates_len + /* (extended) rates */ 697 4 + /* power capability */ 698 2 + 2 * sband->n_channels + /* supported channels */ 699 2 + sizeof(struct ieee80211_ht_cap) + /* HT */ 700 2 + sizeof(struct ieee80211_vht_cap) + /* VHT */ 701 2 + 1 + sizeof(struct ieee80211_he_cap_elem) + /* HE */ 702 sizeof(struct ieee80211_he_mcs_nss_supp) + 703 IEEE80211_HE_PPE_THRES_MAX_LEN + 704 assoc_data->ie_len + /* extra IEs */ 705 (assoc_data->fils_kek_len ? 16 /* AES-SIV */ : 0) + 706 9, /* WMM */ 707 GFP_KERNEL); 708 if (!skb) 709 return; 710 711 skb_reserve(skb, local->hw.extra_tx_headroom); 712 713 capab = WLAN_CAPABILITY_ESS; 714 715 if (sband->band == NL80211_BAND_2GHZ) { 716 capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME; 717 capab |= WLAN_CAPABILITY_SHORT_PREAMBLE; 718 } 719 720 if (assoc_data->capability & WLAN_CAPABILITY_PRIVACY) 721 capab |= WLAN_CAPABILITY_PRIVACY; 722 723 if ((assoc_data->capability & WLAN_CAPABILITY_SPECTRUM_MGMT) && 724 ieee80211_hw_check(&local->hw, SPECTRUM_MGMT)) 725 capab |= WLAN_CAPABILITY_SPECTRUM_MGMT; 726 727 if (ifmgd->flags & IEEE80211_STA_ENABLE_RRM) 728 capab |= WLAN_CAPABILITY_RADIO_MEASURE; 729 730 mgmt = skb_put_zero(skb, 24); 731 memcpy(mgmt->da, assoc_data->bss->bssid, ETH_ALEN); 732 memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); 733 memcpy(mgmt->bssid, assoc_data->bss->bssid, ETH_ALEN); 734 735 if (!is_zero_ether_addr(assoc_data->prev_bssid)) { 736 skb_put(skb, 10); 737 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | 738 IEEE80211_STYPE_REASSOC_REQ); 739 mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab); 740 mgmt->u.reassoc_req.listen_interval = 741 cpu_to_le16(local->hw.conf.listen_interval); 742 memcpy(mgmt->u.reassoc_req.current_ap, assoc_data->prev_bssid, 743 ETH_ALEN); 744 } else { 745 skb_put(skb, 4); 746 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | 747 IEEE80211_STYPE_ASSOC_REQ); 748 mgmt->u.assoc_req.capab_info = cpu_to_le16(capab); 749 mgmt->u.assoc_req.listen_interval = 750 cpu_to_le16(local->hw.conf.listen_interval); 751 } 752 753 /* SSID */ 754 pos = skb_put(skb, 2 + assoc_data->ssid_len); 755 ie_start = pos; 756 *pos++ = WLAN_EID_SSID; 757 *pos++ = assoc_data->ssid_len; 758 memcpy(pos, assoc_data->ssid, assoc_data->ssid_len); 759 760 /* add all rates which were marked to be used above */ 761 supp_rates_len = rates_len; 762 if (supp_rates_len > 8) 763 supp_rates_len = 8; 764 765 pos = skb_put(skb, supp_rates_len + 2); 766 *pos++ = WLAN_EID_SUPP_RATES; 767 *pos++ = supp_rates_len; 768 769 count = 0; 770 for (i = 0; i < sband->n_bitrates; i++) { 771 if (BIT(i) & rates) { 772 int rate = DIV_ROUND_UP(sband->bitrates[i].bitrate, 773 5 * (1 << shift)); 774 *pos++ = (u8) rate; 775 if (++count == 8) 776 break; 777 } 778 } 779 780 if (rates_len > count) { 781 pos = skb_put(skb, rates_len - count + 2); 782 *pos++ = WLAN_EID_EXT_SUPP_RATES; 783 *pos++ = rates_len - count; 784 785 for (i++; i < sband->n_bitrates; i++) { 786 if (BIT(i) & rates) { 787 int rate; 788 rate = DIV_ROUND_UP(sband->bitrates[i].bitrate, 789 5 * (1 << shift)); 790 *pos++ = (u8) rate; 791 } 792 } 793 } 794 795 if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT || 796 capab & WLAN_CAPABILITY_RADIO_MEASURE) { 797 pos = skb_put(skb, 4); 798 *pos++ = WLAN_EID_PWR_CAPABILITY; 799 *pos++ = 2; 800 *pos++ = 0; /* min tx power */ 801 /* max tx power */ 802 *pos++ = ieee80211_chandef_max_power(&chanctx_conf->def); 803 } 804 805 if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT) { 806 /* TODO: get this in reg domain format */ 807 pos = skb_put(skb, 2 * sband->n_channels + 2); 808 *pos++ = WLAN_EID_SUPPORTED_CHANNELS; 809 *pos++ = 2 * sband->n_channels; 810 for (i = 0; i < sband->n_channels; i++) { 811 *pos++ = ieee80211_frequency_to_channel( 812 sband->channels[i].center_freq); 813 *pos++ = 1; /* one channel in the subband*/ 814 } 815 } 816 817 /* Set MBSSID support for HE AP if needed */ 818 if (ieee80211_hw_check(&local->hw, SUPPORTS_ONLY_HE_MULTI_BSSID) && 819 !(ifmgd->flags & IEEE80211_STA_DISABLE_HE) && assoc_data->ie_len) { 820 struct element *elem; 821 822 /* we know it's writable, cast away the const */ 823 elem = (void *)cfg80211_find_elem(WLAN_EID_EXT_CAPABILITY, 824 assoc_data->ie, 825 assoc_data->ie_len); 826 827 /* We can probably assume both always true */ 828 if (elem && elem->datalen >= 3) 829 elem->data[2] |= WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT; 830 } 831 832 /* if present, add any custom IEs that go before HT */ 833 if (assoc_data->ie_len) { 834 static const u8 before_ht[] = { 835 WLAN_EID_SSID, 836 WLAN_EID_SUPP_RATES, 837 WLAN_EID_EXT_SUPP_RATES, 838 WLAN_EID_PWR_CAPABILITY, 839 WLAN_EID_SUPPORTED_CHANNELS, 840 WLAN_EID_RSN, 841 WLAN_EID_QOS_CAPA, 842 WLAN_EID_RRM_ENABLED_CAPABILITIES, 843 WLAN_EID_MOBILITY_DOMAIN, 844 WLAN_EID_FAST_BSS_TRANSITION, /* reassoc only */ 845 WLAN_EID_RIC_DATA, /* reassoc only */ 846 WLAN_EID_SUPPORTED_REGULATORY_CLASSES, 847 }; 848 static const u8 after_ric[] = { 849 WLAN_EID_SUPPORTED_REGULATORY_CLASSES, 850 WLAN_EID_HT_CAPABILITY, 851 WLAN_EID_BSS_COEX_2040, 852 /* luckily this is almost always there */ 853 WLAN_EID_EXT_CAPABILITY, 854 WLAN_EID_QOS_TRAFFIC_CAPA, 855 WLAN_EID_TIM_BCAST_REQ, 856 WLAN_EID_INTERWORKING, 857 /* 60 GHz (Multi-band, DMG, MMS) can't happen */ 858 WLAN_EID_VHT_CAPABILITY, 859 WLAN_EID_OPMODE_NOTIF, 860 }; 861 862 noffset = ieee80211_ie_split_ric(assoc_data->ie, 863 assoc_data->ie_len, 864 before_ht, 865 ARRAY_SIZE(before_ht), 866 after_ric, 867 ARRAY_SIZE(after_ric), 868 offset); 869 skb_put_data(skb, assoc_data->ie + offset, noffset - offset); 870 offset = noffset; 871 } 872 873 if (WARN_ON_ONCE((ifmgd->flags & IEEE80211_STA_DISABLE_HT) && 874 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))) 875 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; 876 877 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) 878 ieee80211_add_ht_ie(sdata, skb, assoc_data->ap_ht_param, 879 sband, chan, sdata->smps_mode); 880 881 /* if present, add any custom IEs that go before VHT */ 882 if (assoc_data->ie_len) { 883 static const u8 before_vht[] = { 884 /* 885 * no need to list the ones split off before HT 886 * or generated here 887 */ 888 WLAN_EID_BSS_COEX_2040, 889 WLAN_EID_EXT_CAPABILITY, 890 WLAN_EID_QOS_TRAFFIC_CAPA, 891 WLAN_EID_TIM_BCAST_REQ, 892 WLAN_EID_INTERWORKING, 893 /* 60 GHz (Multi-band, DMG, MMS) can't happen */ 894 }; 895 896 /* RIC already taken above, so no need to handle here anymore */ 897 noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len, 898 before_vht, ARRAY_SIZE(before_vht), 899 offset); 900 skb_put_data(skb, assoc_data->ie + offset, noffset - offset); 901 offset = noffset; 902 } 903 904 /* if present, add any custom IEs that go before HE */ 905 if (assoc_data->ie_len) { 906 static const u8 before_he[] = { 907 /* 908 * no need to list the ones split off before VHT 909 * or generated here 910 */ 911 WLAN_EID_OPMODE_NOTIF, 912 WLAN_EID_EXTENSION, WLAN_EID_EXT_FUTURE_CHAN_GUIDANCE, 913 /* 11ai elements */ 914 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_SESSION, 915 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_PUBLIC_KEY, 916 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_KEY_CONFIRM, 917 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_HLP_CONTAINER, 918 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_IP_ADDR_ASSIGN, 919 /* TODO: add 11ah/11aj/11ak elements */ 920 }; 921 922 /* RIC already taken above, so no need to handle here anymore */ 923 noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len, 924 before_he, ARRAY_SIZE(before_he), 925 offset); 926 pos = skb_put(skb, noffset - offset); 927 memcpy(pos, assoc_data->ie + offset, noffset - offset); 928 offset = noffset; 929 } 930 931 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) 932 ieee80211_add_vht_ie(sdata, skb, sband, 933 &assoc_data->ap_vht_cap); 934 935 /* 936 * If AP doesn't support HT, mark HE as disabled. 937 * If on the 5GHz band, make sure it supports VHT. 938 */ 939 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || 940 (sband->band == NL80211_BAND_5GHZ && 941 ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) 942 ifmgd->flags |= IEEE80211_STA_DISABLE_HE; 943 944 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE)) 945 ieee80211_add_he_ie(sdata, skb, sband); 946 947 /* if present, add any custom non-vendor IEs that go after HE */ 948 if (assoc_data->ie_len) { 949 noffset = ieee80211_ie_split_vendor(assoc_data->ie, 950 assoc_data->ie_len, 951 offset); 952 skb_put_data(skb, assoc_data->ie + offset, noffset - offset); 953 offset = noffset; 954 } 955 956 if (assoc_data->wmm) { 957 if (assoc_data->uapsd) { 958 qos_info = ifmgd->uapsd_queues; 959 qos_info |= (ifmgd->uapsd_max_sp_len << 960 IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT); 961 } else { 962 qos_info = 0; 963 } 964 965 pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info); 966 } 967 968 /* add any remaining custom (i.e. vendor specific here) IEs */ 969 if (assoc_data->ie_len) { 970 noffset = assoc_data->ie_len; 971 skb_put_data(skb, assoc_data->ie + offset, noffset - offset); 972 } 973 974 if (assoc_data->fils_kek_len && 975 fils_encrypt_assoc_req(skb, assoc_data) < 0) { 976 dev_kfree_skb(skb); 977 return; 978 } 979 980 pos = skb_tail_pointer(skb); 981 kfree(ifmgd->assoc_req_ies); 982 ifmgd->assoc_req_ies = kmemdup(ie_start, pos - ie_start, GFP_ATOMIC); 983 ifmgd->assoc_req_ies_len = pos - ie_start; 984 985 drv_mgd_prepare_tx(local, sdata, 0); 986 987 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; 988 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) 989 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS | 990 IEEE80211_TX_INTFL_MLME_CONN_TX; 991 ieee80211_tx_skb(sdata, skb); 992 } 993 994 void ieee80211_send_pspoll(struct ieee80211_local *local, 995 struct ieee80211_sub_if_data *sdata) 996 { 997 struct ieee80211_pspoll *pspoll; 998 struct sk_buff *skb; 999 1000 skb = ieee80211_pspoll_get(&local->hw, &sdata->vif); 1001 if (!skb) 1002 return; 1003 1004 pspoll = (struct ieee80211_pspoll *) skb->data; 1005 pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); 1006 1007 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; 1008 ieee80211_tx_skb(sdata, skb); 1009 } 1010 1011 void ieee80211_send_nullfunc(struct ieee80211_local *local, 1012 struct ieee80211_sub_if_data *sdata, 1013 bool powersave) 1014 { 1015 struct sk_buff *skb; 1016 struct ieee80211_hdr_3addr *nullfunc; 1017 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 1018 1019 /* Don't send NDPs when STA is connected HE */ 1020 if (sdata->vif.type == NL80211_IFTYPE_STATION && 1021 !(ifmgd->flags & IEEE80211_STA_DISABLE_HE)) 1022 return; 1023 1024 skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif, 1025 !ieee80211_hw_check(&local->hw, DOESNT_SUPPORT_QOS_NDP)); 1026 if (!skb) 1027 return; 1028 1029 nullfunc = (struct ieee80211_hdr_3addr *) skb->data; 1030 if (powersave) 1031 nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); 1032 1033 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT | 1034 IEEE80211_TX_INTFL_OFFCHAN_TX_OK; 1035 1036 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) 1037 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; 1038 1039 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) 1040 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE; 1041 1042 ieee80211_tx_skb(sdata, skb); 1043 } 1044 1045 static void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local, 1046 struct ieee80211_sub_if_data *sdata) 1047 { 1048 struct sk_buff *skb; 1049 struct ieee80211_hdr *nullfunc; 1050 __le16 fc; 1051 1052 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION)) 1053 return; 1054 1055 /* Don't send NDPs when connected HE */ 1056 if (!(sdata->u.mgd.flags & IEEE80211_STA_DISABLE_HE)) 1057 return; 1058 1059 skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30); 1060 if (!skb) 1061 return; 1062 1063 skb_reserve(skb, local->hw.extra_tx_headroom); 1064 1065 nullfunc = skb_put_zero(skb, 30); 1066 fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC | 1067 IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); 1068 nullfunc->frame_control = fc; 1069 memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN); 1070 memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN); 1071 memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN); 1072 memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN); 1073 1074 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; 1075 ieee80211_tx_skb(sdata, skb); 1076 } 1077 1078 /* spectrum management related things */ 1079 static void ieee80211_chswitch_work(struct work_struct *work) 1080 { 1081 struct ieee80211_sub_if_data *sdata = 1082 container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work); 1083 struct ieee80211_local *local = sdata->local; 1084 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 1085 int ret; 1086 1087 if (!ieee80211_sdata_running(sdata)) 1088 return; 1089 1090 sdata_lock(sdata); 1091 mutex_lock(&local->mtx); 1092 mutex_lock(&local->chanctx_mtx); 1093 1094 if (!ifmgd->associated) 1095 goto out; 1096 1097 if (!sdata->vif.csa_active) 1098 goto out; 1099 1100 /* 1101 * using reservation isn't immediate as it may be deferred until later 1102 * with multi-vif. once reservation is complete it will re-schedule the 1103 * work with no reserved_chanctx so verify chandef to check if it 1104 * completed successfully 1105 */ 1106 1107 if (sdata->reserved_chanctx) { 1108 struct ieee80211_supported_band *sband = NULL; 1109 struct sta_info *mgd_sta = NULL; 1110 enum ieee80211_sta_rx_bandwidth bw = IEEE80211_STA_RX_BW_20; 1111 1112 /* 1113 * with multi-vif csa driver may call ieee80211_csa_finish() 1114 * many times while waiting for other interfaces to use their 1115 * reservations 1116 */ 1117 if (sdata->reserved_ready) 1118 goto out; 1119 1120 if (sdata->vif.bss_conf.chandef.width != 1121 sdata->csa_chandef.width) { 1122 /* 1123 * For managed interface, we need to also update the AP 1124 * station bandwidth and align the rate scale algorithm 1125 * on the bandwidth change. Here we only consider the 1126 * bandwidth of the new channel definition (as channel 1127 * switch flow does not have the full HT/VHT/HE 1128 * information), assuming that if additional changes are 1129 * required they would be done as part of the processing 1130 * of the next beacon from the AP. 1131 */ 1132 switch (sdata->csa_chandef.width) { 1133 case NL80211_CHAN_WIDTH_20_NOHT: 1134 case NL80211_CHAN_WIDTH_20: 1135 default: 1136 bw = IEEE80211_STA_RX_BW_20; 1137 break; 1138 case NL80211_CHAN_WIDTH_40: 1139 bw = IEEE80211_STA_RX_BW_40; 1140 break; 1141 case NL80211_CHAN_WIDTH_80: 1142 bw = IEEE80211_STA_RX_BW_80; 1143 break; 1144 case NL80211_CHAN_WIDTH_80P80: 1145 case NL80211_CHAN_WIDTH_160: 1146 bw = IEEE80211_STA_RX_BW_160; 1147 break; 1148 } 1149 1150 mgd_sta = sta_info_get(sdata, ifmgd->bssid); 1151 sband = 1152 local->hw.wiphy->bands[sdata->csa_chandef.chan->band]; 1153 } 1154 1155 if (sdata->vif.bss_conf.chandef.width > 1156 sdata->csa_chandef.width) { 1157 mgd_sta->sta.bandwidth = bw; 1158 rate_control_rate_update(local, sband, mgd_sta, 1159 IEEE80211_RC_BW_CHANGED); 1160 } 1161 1162 ret = ieee80211_vif_use_reserved_context(sdata); 1163 if (ret) { 1164 sdata_info(sdata, 1165 "failed to use reserved channel context, disconnecting (err=%d)\n", 1166 ret); 1167 ieee80211_queue_work(&sdata->local->hw, 1168 &ifmgd->csa_connection_drop_work); 1169 goto out; 1170 } 1171 1172 if (sdata->vif.bss_conf.chandef.width < 1173 sdata->csa_chandef.width) { 1174 mgd_sta->sta.bandwidth = bw; 1175 rate_control_rate_update(local, sband, mgd_sta, 1176 IEEE80211_RC_BW_CHANGED); 1177 } 1178 1179 goto out; 1180 } 1181 1182 if (!cfg80211_chandef_identical(&sdata->vif.bss_conf.chandef, 1183 &sdata->csa_chandef)) { 1184 sdata_info(sdata, 1185 "failed to finalize channel switch, disconnecting\n"); 1186 ieee80211_queue_work(&sdata->local->hw, 1187 &ifmgd->csa_connection_drop_work); 1188 goto out; 1189 } 1190 1191 ifmgd->csa_waiting_bcn = true; 1192 1193 ieee80211_sta_reset_beacon_monitor(sdata); 1194 ieee80211_sta_reset_conn_monitor(sdata); 1195 1196 out: 1197 mutex_unlock(&local->chanctx_mtx); 1198 mutex_unlock(&local->mtx); 1199 sdata_unlock(sdata); 1200 } 1201 1202 static void ieee80211_chswitch_post_beacon(struct ieee80211_sub_if_data *sdata) 1203 { 1204 struct ieee80211_local *local = sdata->local; 1205 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 1206 int ret; 1207 1208 sdata_assert_lock(sdata); 1209 1210 WARN_ON(!sdata->vif.csa_active); 1211 1212 if (sdata->csa_block_tx) { 1213 ieee80211_wake_vif_queues(local, sdata, 1214 IEEE80211_QUEUE_STOP_REASON_CSA); 1215 sdata->csa_block_tx = false; 1216 } 1217 1218 sdata->vif.csa_active = false; 1219 ifmgd->csa_waiting_bcn = false; 1220 1221 ret = drv_post_channel_switch(sdata); 1222 if (ret) { 1223 sdata_info(sdata, 1224 "driver post channel switch failed, disconnecting\n"); 1225 ieee80211_queue_work(&local->hw, 1226 &ifmgd->csa_connection_drop_work); 1227 return; 1228 } 1229 1230 cfg80211_ch_switch_notify(sdata->dev, &sdata->reserved_chandef); 1231 } 1232 1233 void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success) 1234 { 1235 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); 1236 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 1237 1238 trace_api_chswitch_done(sdata, success); 1239 if (!success) { 1240 sdata_info(sdata, 1241 "driver channel switch failed, disconnecting\n"); 1242 ieee80211_queue_work(&sdata->local->hw, 1243 &ifmgd->csa_connection_drop_work); 1244 } else { 1245 ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work); 1246 } 1247 } 1248 EXPORT_SYMBOL(ieee80211_chswitch_done); 1249 1250 static void ieee80211_chswitch_timer(struct timer_list *t) 1251 { 1252 struct ieee80211_sub_if_data *sdata = 1253 from_timer(sdata, t, u.mgd.chswitch_timer); 1254 1255 ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.chswitch_work); 1256 } 1257 1258 static void 1259 ieee80211_sta_abort_chanswitch(struct ieee80211_sub_if_data *sdata) 1260 { 1261 struct ieee80211_local *local = sdata->local; 1262 1263 if (!local->ops->abort_channel_switch) 1264 return; 1265 1266 mutex_lock(&local->mtx); 1267 1268 mutex_lock(&local->chanctx_mtx); 1269 ieee80211_vif_unreserve_chanctx(sdata); 1270 mutex_unlock(&local->chanctx_mtx); 1271 1272 if (sdata->csa_block_tx) 1273 ieee80211_wake_vif_queues(local, sdata, 1274 IEEE80211_QUEUE_STOP_REASON_CSA); 1275 1276 sdata->csa_block_tx = false; 1277 sdata->vif.csa_active = false; 1278 1279 mutex_unlock(&local->mtx); 1280 1281 drv_abort_channel_switch(sdata); 1282 } 1283 1284 static void 1285 ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, 1286 u64 timestamp, u32 device_timestamp, 1287 struct ieee802_11_elems *elems, 1288 bool beacon) 1289 { 1290 struct ieee80211_local *local = sdata->local; 1291 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 1292 struct cfg80211_bss *cbss = ifmgd->associated; 1293 struct ieee80211_chanctx_conf *conf; 1294 struct ieee80211_chanctx *chanctx; 1295 enum nl80211_band current_band; 1296 struct ieee80211_csa_ie csa_ie; 1297 struct ieee80211_channel_switch ch_switch; 1298 int res; 1299 1300 sdata_assert_lock(sdata); 1301 1302 if (!cbss) 1303 return; 1304 1305 if (local->scanning) 1306 return; 1307 1308 current_band = cbss->channel->band; 1309 res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band, 1310 ifmgd->flags, 1311 ifmgd->associated->bssid, &csa_ie); 1312 1313 if (!res) { 1314 ch_switch.timestamp = timestamp; 1315 ch_switch.device_timestamp = device_timestamp; 1316 ch_switch.block_tx = beacon ? csa_ie.mode : 0; 1317 ch_switch.chandef = csa_ie.chandef; 1318 ch_switch.count = csa_ie.count; 1319 ch_switch.delay = csa_ie.max_switch_time; 1320 } 1321 1322 if (res < 0) { 1323 ieee80211_queue_work(&local->hw, 1324 &ifmgd->csa_connection_drop_work); 1325 return; 1326 } 1327 1328 if (beacon && sdata->vif.csa_active && !ifmgd->csa_waiting_bcn) { 1329 if (res) 1330 ieee80211_sta_abort_chanswitch(sdata); 1331 else 1332 drv_channel_switch_rx_beacon(sdata, &ch_switch); 1333 return; 1334 } else if (sdata->vif.csa_active || res) { 1335 /* disregard subsequent announcements if already processing */ 1336 return; 1337 } 1338 1339 if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef, 1340 IEEE80211_CHAN_DISABLED)) { 1341 sdata_info(sdata, 1342 "AP %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n", 1343 ifmgd->associated->bssid, 1344 csa_ie.chandef.chan->center_freq, 1345 csa_ie.chandef.width, csa_ie.chandef.center_freq1, 1346 csa_ie.chandef.center_freq2); 1347 ieee80211_queue_work(&local->hw, 1348 &ifmgd->csa_connection_drop_work); 1349 return; 1350 } 1351 1352 if (cfg80211_chandef_identical(&csa_ie.chandef, 1353 &sdata->vif.bss_conf.chandef) && 1354 (!csa_ie.mode || !beacon)) { 1355 if (ifmgd->csa_ignored_same_chan) 1356 return; 1357 sdata_info(sdata, 1358 "AP %pM tries to chanswitch to same channel, ignore\n", 1359 ifmgd->associated->bssid); 1360 ifmgd->csa_ignored_same_chan = true; 1361 return; 1362 } 1363 1364 /* 1365 * Drop all TDLS peers - either we disconnect or move to a different 1366 * channel from this point on. There's no telling what our peer will do. 1367 * The TDLS WIDER_BW scenario is also problematic, as peers might now 1368 * have an incompatible wider chandef. 1369 */ 1370 ieee80211_teardown_tdls_peers(sdata); 1371 1372 mutex_lock(&local->mtx); 1373 mutex_lock(&local->chanctx_mtx); 1374 conf = rcu_dereference_protected(sdata->vif.chanctx_conf, 1375 lockdep_is_held(&local->chanctx_mtx)); 1376 if (!conf) { 1377 sdata_info(sdata, 1378 "no channel context assigned to vif?, disconnecting\n"); 1379 goto drop_connection; 1380 } 1381 1382 chanctx = container_of(conf, struct ieee80211_chanctx, conf); 1383 1384 if (local->use_chanctx && 1385 !ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA)) { 1386 sdata_info(sdata, 1387 "driver doesn't support chan-switch with channel contexts\n"); 1388 goto drop_connection; 1389 } 1390 1391 if (drv_pre_channel_switch(sdata, &ch_switch)) { 1392 sdata_info(sdata, 1393 "preparing for channel switch failed, disconnecting\n"); 1394 goto drop_connection; 1395 } 1396 1397 res = ieee80211_vif_reserve_chanctx(sdata, &csa_ie.chandef, 1398 chanctx->mode, false); 1399 if (res) { 1400 sdata_info(sdata, 1401 "failed to reserve channel context for channel switch, disconnecting (err=%d)\n", 1402 res); 1403 goto drop_connection; 1404 } 1405 mutex_unlock(&local->chanctx_mtx); 1406 1407 sdata->vif.csa_active = true; 1408 sdata->csa_chandef = csa_ie.chandef; 1409 sdata->csa_block_tx = ch_switch.block_tx; 1410 ifmgd->csa_ignored_same_chan = false; 1411 1412 if (sdata->csa_block_tx) 1413 ieee80211_stop_vif_queues(local, sdata, 1414 IEEE80211_QUEUE_STOP_REASON_CSA); 1415 mutex_unlock(&local->mtx); 1416 1417 cfg80211_ch_switch_started_notify(sdata->dev, &csa_ie.chandef, 1418 csa_ie.count); 1419 1420 if (local->ops->channel_switch) { 1421 /* use driver's channel switch callback */ 1422 drv_channel_switch(local, sdata, &ch_switch); 1423 return; 1424 } 1425 1426 /* channel switch handled in software */ 1427 if (csa_ie.count <= 1) 1428 ieee80211_queue_work(&local->hw, &ifmgd->chswitch_work); 1429 else 1430 mod_timer(&ifmgd->chswitch_timer, 1431 TU_TO_EXP_TIME((csa_ie.count - 1) * 1432 cbss->beacon_interval)); 1433 return; 1434 drop_connection: 1435 /* 1436 * This is just so that the disconnect flow will know that 1437 * we were trying to switch channel and failed. In case the 1438 * mode is 1 (we are not allowed to Tx), we will know not to 1439 * send a deauthentication frame. Those two fields will be 1440 * reset when the disconnection worker runs. 1441 */ 1442 sdata->vif.csa_active = true; 1443 sdata->csa_block_tx = ch_switch.block_tx; 1444 1445 ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work); 1446 mutex_unlock(&local->chanctx_mtx); 1447 mutex_unlock(&local->mtx); 1448 } 1449 1450 static bool 1451 ieee80211_find_80211h_pwr_constr(struct ieee80211_sub_if_data *sdata, 1452 struct ieee80211_channel *channel, 1453 const u8 *country_ie, u8 country_ie_len, 1454 const u8 *pwr_constr_elem, 1455 int *chan_pwr, int *pwr_reduction) 1456 { 1457 struct ieee80211_country_ie_triplet *triplet; 1458 int chan = ieee80211_frequency_to_channel(channel->center_freq); 1459 int i, chan_increment; 1460 bool have_chan_pwr = false; 1461 1462 /* Invalid IE */ 1463 if (country_ie_len % 2 || country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN) 1464 return false; 1465 1466 triplet = (void *)(country_ie + 3); 1467 country_ie_len -= 3; 1468 1469 switch (channel->band) { 1470 default: 1471 WARN_ON_ONCE(1); 1472 /* fall through */ 1473 case NL80211_BAND_2GHZ: 1474 case NL80211_BAND_60GHZ: 1475 chan_increment = 1; 1476 break; 1477 case NL80211_BAND_5GHZ: 1478 chan_increment = 4; 1479 break; 1480 } 1481 1482 /* find channel */ 1483 while (country_ie_len >= 3) { 1484 u8 first_channel = triplet->chans.first_channel; 1485 1486 if (first_channel >= IEEE80211_COUNTRY_EXTENSION_ID) 1487 goto next; 1488 1489 for (i = 0; i < triplet->chans.num_channels; i++) { 1490 if (first_channel + i * chan_increment == chan) { 1491 have_chan_pwr = true; 1492 *chan_pwr = triplet->chans.max_power; 1493 break; 1494 } 1495 } 1496 if (have_chan_pwr) 1497 break; 1498 1499 next: 1500 triplet++; 1501 country_ie_len -= 3; 1502 } 1503 1504 if (have_chan_pwr && pwr_constr_elem) 1505 *pwr_reduction = *pwr_constr_elem; 1506 else 1507 *pwr_reduction = 0; 1508 1509 return have_chan_pwr; 1510 } 1511 1512 static void ieee80211_find_cisco_dtpc(struct ieee80211_sub_if_data *sdata, 1513 struct ieee80211_channel *channel, 1514 const u8 *cisco_dtpc_ie, 1515 int *pwr_level) 1516 { 1517 /* From practical testing, the first data byte of the DTPC element 1518 * seems to contain the requested dBm level, and the CLI on Cisco 1519 * APs clearly state the range is -127 to 127 dBm, which indicates 1520 * a signed byte, although it seemingly never actually goes negative. 1521 * The other byte seems to always be zero. 1522 */ 1523 *pwr_level = (__s8)cisco_dtpc_ie[4]; 1524 } 1525 1526 static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata, 1527 struct ieee80211_channel *channel, 1528 struct ieee80211_mgmt *mgmt, 1529 const u8 *country_ie, u8 country_ie_len, 1530 const u8 *pwr_constr_ie, 1531 const u8 *cisco_dtpc_ie) 1532 { 1533 bool has_80211h_pwr = false, has_cisco_pwr = false; 1534 int chan_pwr = 0, pwr_reduction_80211h = 0; 1535 int pwr_level_cisco, pwr_level_80211h; 1536 int new_ap_level; 1537 __le16 capab = mgmt->u.probe_resp.capab_info; 1538 1539 if (country_ie && 1540 (capab & cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT) || 1541 capab & cpu_to_le16(WLAN_CAPABILITY_RADIO_MEASURE))) { 1542 has_80211h_pwr = ieee80211_find_80211h_pwr_constr( 1543 sdata, channel, country_ie, country_ie_len, 1544 pwr_constr_ie, &chan_pwr, &pwr_reduction_80211h); 1545 pwr_level_80211h = 1546 max_t(int, 0, chan_pwr - pwr_reduction_80211h); 1547 } 1548 1549 if (cisco_dtpc_ie) { 1550 ieee80211_find_cisco_dtpc( 1551 sdata, channel, cisco_dtpc_ie, &pwr_level_cisco); 1552 has_cisco_pwr = true; 1553 } 1554 1555 if (!has_80211h_pwr && !has_cisco_pwr) 1556 return 0; 1557 1558 /* If we have both 802.11h and Cisco DTPC, apply both limits 1559 * by picking the smallest of the two power levels advertised. 1560 */ 1561 if (has_80211h_pwr && 1562 (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) { 1563 new_ap_level = pwr_level_80211h; 1564 1565 if (sdata->ap_power_level == new_ap_level) 1566 return 0; 1567 1568 sdata_dbg(sdata, 1569 "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n", 1570 pwr_level_80211h, chan_pwr, pwr_reduction_80211h, 1571 sdata->u.mgd.bssid); 1572 } else { /* has_cisco_pwr is always true here. */ 1573 new_ap_level = pwr_level_cisco; 1574 1575 if (sdata->ap_power_level == new_ap_level) 1576 return 0; 1577 1578 sdata_dbg(sdata, 1579 "Limiting TX power to %d dBm as advertised by %pM\n", 1580 pwr_level_cisco, sdata->u.mgd.bssid); 1581 } 1582 1583 sdata->ap_power_level = new_ap_level; 1584 if (__ieee80211_recalc_txpower(sdata)) 1585 return BSS_CHANGED_TXPOWER; 1586 return 0; 1587 } 1588 1589 /* powersave */ 1590 static void ieee80211_enable_ps(struct ieee80211_local *local, 1591 struct ieee80211_sub_if_data *sdata) 1592 { 1593 struct ieee80211_conf *conf = &local->hw.conf; 1594 1595 /* 1596 * If we are scanning right now then the parameters will 1597 * take effect when scan finishes. 1598 */ 1599 if (local->scanning) 1600 return; 1601 1602 if (conf->dynamic_ps_timeout > 0 && 1603 !ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) { 1604 mod_timer(&local->dynamic_ps_timer, jiffies + 1605 msecs_to_jiffies(conf->dynamic_ps_timeout)); 1606 } else { 1607 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) 1608 ieee80211_send_nullfunc(local, sdata, true); 1609 1610 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) && 1611 ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) 1612 return; 1613 1614 conf->flags |= IEEE80211_CONF_PS; 1615 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); 1616 } 1617 } 1618 1619 static void ieee80211_change_ps(struct ieee80211_local *local) 1620 { 1621 struct ieee80211_conf *conf = &local->hw.conf; 1622 1623 if (local->ps_sdata) { 1624 ieee80211_enable_ps(local, local->ps_sdata); 1625 } else if (conf->flags & IEEE80211_CONF_PS) { 1626 conf->flags &= ~IEEE80211_CONF_PS; 1627 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); 1628 del_timer_sync(&local->dynamic_ps_timer); 1629 cancel_work_sync(&local->dynamic_ps_enable_work); 1630 } 1631 } 1632 1633 static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata) 1634 { 1635 struct ieee80211_if_managed *mgd = &sdata->u.mgd; 1636 struct sta_info *sta = NULL; 1637 bool authorized = false; 1638 1639 if (!mgd->powersave) 1640 return false; 1641 1642 if (mgd->broken_ap) 1643 return false; 1644 1645 if (!mgd->associated) 1646 return false; 1647 1648 if (mgd->flags & IEEE80211_STA_CONNECTION_POLL) 1649 return false; 1650 1651 if (!mgd->have_beacon) 1652 return false; 1653 1654 rcu_read_lock(); 1655 sta = sta_info_get(sdata, mgd->bssid); 1656 if (sta) 1657 authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); 1658 rcu_read_unlock(); 1659 1660 return authorized; 1661 } 1662 1663 /* need to hold RTNL or interface lock */ 1664 void ieee80211_recalc_ps(struct ieee80211_local *local) 1665 { 1666 struct ieee80211_sub_if_data *sdata, *found = NULL; 1667 int count = 0; 1668 int timeout; 1669 1670 if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS)) { 1671 local->ps_sdata = NULL; 1672 return; 1673 } 1674 1675 list_for_each_entry(sdata, &local->interfaces, list) { 1676 if (!ieee80211_sdata_running(sdata)) 1677 continue; 1678 if (sdata->vif.type == NL80211_IFTYPE_AP) { 1679 /* If an AP vif is found, then disable PS 1680 * by setting the count to zero thereby setting 1681 * ps_sdata to NULL. 1682 */ 1683 count = 0; 1684 break; 1685 } 1686 if (sdata->vif.type != NL80211_IFTYPE_STATION) 1687 continue; 1688 found = sdata; 1689 count++; 1690 } 1691 1692 if (count == 1 && ieee80211_powersave_allowed(found)) { 1693 u8 dtimper = found->u.mgd.dtim_period; 1694 1695 timeout = local->dynamic_ps_forced_timeout; 1696 if (timeout < 0) 1697 timeout = 100; 1698 local->hw.conf.dynamic_ps_timeout = timeout; 1699 1700 /* If the TIM IE is invalid, pretend the value is 1 */ 1701 if (!dtimper) 1702 dtimper = 1; 1703 1704 local->hw.conf.ps_dtim_period = dtimper; 1705 local->ps_sdata = found; 1706 } else { 1707 local->ps_sdata = NULL; 1708 } 1709 1710 ieee80211_change_ps(local); 1711 } 1712 1713 void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata) 1714 { 1715 bool ps_allowed = ieee80211_powersave_allowed(sdata); 1716 1717 if (sdata->vif.bss_conf.ps != ps_allowed) { 1718 sdata->vif.bss_conf.ps = ps_allowed; 1719 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_PS); 1720 } 1721 } 1722 1723 void ieee80211_dynamic_ps_disable_work(struct work_struct *work) 1724 { 1725 struct ieee80211_local *local = 1726 container_of(work, struct ieee80211_local, 1727 dynamic_ps_disable_work); 1728 1729 if (local->hw.conf.flags & IEEE80211_CONF_PS) { 1730 local->hw.conf.flags &= ~IEEE80211_CONF_PS; 1731 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); 1732 } 1733 1734 ieee80211_wake_queues_by_reason(&local->hw, 1735 IEEE80211_MAX_QUEUE_MAP, 1736 IEEE80211_QUEUE_STOP_REASON_PS, 1737 false); 1738 } 1739 1740 void ieee80211_dynamic_ps_enable_work(struct work_struct *work) 1741 { 1742 struct ieee80211_local *local = 1743 container_of(work, struct ieee80211_local, 1744 dynamic_ps_enable_work); 1745 struct ieee80211_sub_if_data *sdata = local->ps_sdata; 1746 struct ieee80211_if_managed *ifmgd; 1747 unsigned long flags; 1748 int q; 1749 1750 /* can only happen when PS was just disabled anyway */ 1751 if (!sdata) 1752 return; 1753 1754 ifmgd = &sdata->u.mgd; 1755 1756 if (local->hw.conf.flags & IEEE80211_CONF_PS) 1757 return; 1758 1759 if (local->hw.conf.dynamic_ps_timeout > 0) { 1760 /* don't enter PS if TX frames are pending */ 1761 if (drv_tx_frames_pending(local)) { 1762 mod_timer(&local->dynamic_ps_timer, jiffies + 1763 msecs_to_jiffies( 1764 local->hw.conf.dynamic_ps_timeout)); 1765 return; 1766 } 1767 1768 /* 1769 * transmission can be stopped by others which leads to 1770 * dynamic_ps_timer expiry. Postpone the ps timer if it 1771 * is not the actual idle state. 1772 */ 1773 spin_lock_irqsave(&local->queue_stop_reason_lock, flags); 1774 for (q = 0; q < local->hw.queues; q++) { 1775 if (local->queue_stop_reasons[q]) { 1776 spin_unlock_irqrestore(&local->queue_stop_reason_lock, 1777 flags); 1778 mod_timer(&local->dynamic_ps_timer, jiffies + 1779 msecs_to_jiffies( 1780 local->hw.conf.dynamic_ps_timeout)); 1781 return; 1782 } 1783 } 1784 spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); 1785 } 1786 1787 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) && 1788 !(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) { 1789 if (drv_tx_frames_pending(local)) { 1790 mod_timer(&local->dynamic_ps_timer, jiffies + 1791 msecs_to_jiffies( 1792 local->hw.conf.dynamic_ps_timeout)); 1793 } else { 1794 ieee80211_send_nullfunc(local, sdata, true); 1795 /* Flush to get the tx status of nullfunc frame */ 1796 ieee80211_flush_queues(local, sdata, false); 1797 } 1798 } 1799 1800 if (!(ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS) && 1801 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) || 1802 (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) { 1803 ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED; 1804 local->hw.conf.flags |= IEEE80211_CONF_PS; 1805 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); 1806 } 1807 } 1808 1809 void ieee80211_dynamic_ps_timer(struct timer_list *t) 1810 { 1811 struct ieee80211_local *local = from_timer(local, t, dynamic_ps_timer); 1812 1813 ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work); 1814 } 1815 1816 void ieee80211_dfs_cac_timer_work(struct work_struct *work) 1817 { 1818 struct delayed_work *delayed_work = to_delayed_work(work); 1819 struct ieee80211_sub_if_data *sdata = 1820 container_of(delayed_work, struct ieee80211_sub_if_data, 1821 dfs_cac_timer_work); 1822 struct cfg80211_chan_def chandef = sdata->vif.bss_conf.chandef; 1823 1824 mutex_lock(&sdata->local->mtx); 1825 if (sdata->wdev.cac_started) { 1826 ieee80211_vif_release_channel(sdata); 1827 cfg80211_cac_event(sdata->dev, &chandef, 1828 NL80211_RADAR_CAC_FINISHED, 1829 GFP_KERNEL); 1830 } 1831 mutex_unlock(&sdata->local->mtx); 1832 } 1833 1834 static bool 1835 __ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata) 1836 { 1837 struct ieee80211_local *local = sdata->local; 1838 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 1839 bool ret = false; 1840 int ac; 1841 1842 if (local->hw.queues < IEEE80211_NUM_ACS) 1843 return false; 1844 1845 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { 1846 struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac]; 1847 int non_acm_ac; 1848 unsigned long now = jiffies; 1849 1850 if (tx_tspec->action == TX_TSPEC_ACTION_NONE && 1851 tx_tspec->admitted_time && 1852 time_after(now, tx_tspec->time_slice_start + HZ)) { 1853 tx_tspec->consumed_tx_time = 0; 1854 tx_tspec->time_slice_start = now; 1855 1856 if (tx_tspec->downgraded) 1857 tx_tspec->action = 1858 TX_TSPEC_ACTION_STOP_DOWNGRADE; 1859 } 1860 1861 switch (tx_tspec->action) { 1862 case TX_TSPEC_ACTION_STOP_DOWNGRADE: 1863 /* take the original parameters */ 1864 if (drv_conf_tx(local, sdata, ac, &sdata->tx_conf[ac])) 1865 sdata_err(sdata, 1866 "failed to set TX queue parameters for queue %d\n", 1867 ac); 1868 tx_tspec->action = TX_TSPEC_ACTION_NONE; 1869 tx_tspec->downgraded = false; 1870 ret = true; 1871 break; 1872 case TX_TSPEC_ACTION_DOWNGRADE: 1873 if (time_after(now, tx_tspec->time_slice_start + HZ)) { 1874 tx_tspec->action = TX_TSPEC_ACTION_NONE; 1875 ret = true; 1876 break; 1877 } 1878 /* downgrade next lower non-ACM AC */ 1879 for (non_acm_ac = ac + 1; 1880 non_acm_ac < IEEE80211_NUM_ACS; 1881 non_acm_ac++) 1882 if (!(sdata->wmm_acm & BIT(7 - 2 * non_acm_ac))) 1883 break; 1884 /* Usually the loop will result in using BK even if it 1885 * requires admission control, but such a configuration 1886 * makes no sense and we have to transmit somehow - the 1887 * AC selection does the same thing. 1888 * If we started out trying to downgrade from BK, then 1889 * the extra condition here might be needed. 1890 */ 1891 if (non_acm_ac >= IEEE80211_NUM_ACS) 1892 non_acm_ac = IEEE80211_AC_BK; 1893 if (drv_conf_tx(local, sdata, ac, 1894 &sdata->tx_conf[non_acm_ac])) 1895 sdata_err(sdata, 1896 "failed to set TX queue parameters for queue %d\n", 1897 ac); 1898 tx_tspec->action = TX_TSPEC_ACTION_NONE; 1899 ret = true; 1900 schedule_delayed_work(&ifmgd->tx_tspec_wk, 1901 tx_tspec->time_slice_start + HZ - now + 1); 1902 break; 1903 case TX_TSPEC_ACTION_NONE: 1904 /* nothing now */ 1905 break; 1906 } 1907 } 1908 1909 return ret; 1910 } 1911 1912 void ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata) 1913 { 1914 if (__ieee80211_sta_handle_tspec_ac_params(sdata)) 1915 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_QOS); 1916 } 1917 1918 static void ieee80211_sta_handle_tspec_ac_params_wk(struct work_struct *work) 1919 { 1920 struct ieee80211_sub_if_data *sdata; 1921 1922 sdata = container_of(work, struct ieee80211_sub_if_data, 1923 u.mgd.tx_tspec_wk.work); 1924 ieee80211_sta_handle_tspec_ac_params(sdata); 1925 } 1926 1927 /* MLME */ 1928 static bool 1929 ieee80211_sta_wmm_params(struct ieee80211_local *local, 1930 struct ieee80211_sub_if_data *sdata, 1931 const u8 *wmm_param, size_t wmm_param_len, 1932 const struct ieee80211_mu_edca_param_set *mu_edca) 1933 { 1934 struct ieee80211_tx_queue_params params[IEEE80211_NUM_ACS]; 1935 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 1936 size_t left; 1937 int count, mu_edca_count, ac; 1938 const u8 *pos; 1939 u8 uapsd_queues = 0; 1940 1941 if (!local->ops->conf_tx) 1942 return false; 1943 1944 if (local->hw.queues < IEEE80211_NUM_ACS) 1945 return false; 1946 1947 if (!wmm_param) 1948 return false; 1949 1950 if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1) 1951 return false; 1952 1953 if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED) 1954 uapsd_queues = ifmgd->uapsd_queues; 1955 1956 count = wmm_param[6] & 0x0f; 1957 /* -1 is the initial value of ifmgd->mu_edca_last_param_set. 1958 * if mu_edca was preset before and now it disappeared tell 1959 * the driver about it. 1960 */ 1961 mu_edca_count = mu_edca ? mu_edca->mu_qos_info & 0x0f : -1; 1962 if (count == ifmgd->wmm_last_param_set && 1963 mu_edca_count == ifmgd->mu_edca_last_param_set) 1964 return false; 1965 ifmgd->wmm_last_param_set = count; 1966 ifmgd->mu_edca_last_param_set = mu_edca_count; 1967 1968 pos = wmm_param + 8; 1969 left = wmm_param_len - 8; 1970 1971 memset(¶ms, 0, sizeof(params)); 1972 1973 sdata->wmm_acm = 0; 1974 for (; left >= 4; left -= 4, pos += 4) { 1975 int aci = (pos[0] >> 5) & 0x03; 1976 int acm = (pos[0] >> 4) & 0x01; 1977 bool uapsd = false; 1978 1979 switch (aci) { 1980 case 1: /* AC_BK */ 1981 ac = IEEE80211_AC_BK; 1982 if (acm) 1983 sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */ 1984 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK) 1985 uapsd = true; 1986 params[ac].mu_edca = !!mu_edca; 1987 if (mu_edca) 1988 params[ac].mu_edca_param_rec = mu_edca->ac_bk; 1989 break; 1990 case 2: /* AC_VI */ 1991 ac = IEEE80211_AC_VI; 1992 if (acm) 1993 sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */ 1994 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI) 1995 uapsd = true; 1996 params[ac].mu_edca = !!mu_edca; 1997 if (mu_edca) 1998 params[ac].mu_edca_param_rec = mu_edca->ac_vi; 1999 break; 2000 case 3: /* AC_VO */ 2001 ac = IEEE80211_AC_VO; 2002 if (acm) 2003 sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */ 2004 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO) 2005 uapsd = true; 2006 params[ac].mu_edca = !!mu_edca; 2007 if (mu_edca) 2008 params[ac].mu_edca_param_rec = mu_edca->ac_vo; 2009 break; 2010 case 0: /* AC_BE */ 2011 default: 2012 ac = IEEE80211_AC_BE; 2013 if (acm) 2014 sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */ 2015 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE) 2016 uapsd = true; 2017 params[ac].mu_edca = !!mu_edca; 2018 if (mu_edca) 2019 params[ac].mu_edca_param_rec = mu_edca->ac_be; 2020 break; 2021 } 2022 2023 params[ac].aifs = pos[0] & 0x0f; 2024 2025 if (params[ac].aifs < 2) { 2026 sdata_info(sdata, 2027 "AP has invalid WMM params (AIFSN=%d for ACI %d), will use 2\n", 2028 params[ac].aifs, aci); 2029 params[ac].aifs = 2; 2030 } 2031 params[ac].cw_max = ecw2cw((pos[1] & 0xf0) >> 4); 2032 params[ac].cw_min = ecw2cw(pos[1] & 0x0f); 2033 params[ac].txop = get_unaligned_le16(pos + 2); 2034 params[ac].acm = acm; 2035 params[ac].uapsd = uapsd; 2036 2037 if (params[ac].cw_min == 0 || 2038 params[ac].cw_min > params[ac].cw_max) { 2039 sdata_info(sdata, 2040 "AP has invalid WMM params (CWmin/max=%d/%d for ACI %d), using defaults\n", 2041 params[ac].cw_min, params[ac].cw_max, aci); 2042 return false; 2043 } 2044 ieee80211_regulatory_limit_wmm_params(sdata, ¶ms[ac], ac); 2045 } 2046 2047 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { 2048 mlme_dbg(sdata, 2049 "WMM AC=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n", 2050 ac, params[ac].acm, 2051 params[ac].aifs, params[ac].cw_min, params[ac].cw_max, 2052 params[ac].txop, params[ac].uapsd, 2053 ifmgd->tx_tspec[ac].downgraded); 2054 sdata->tx_conf[ac] = params[ac]; 2055 if (!ifmgd->tx_tspec[ac].downgraded && 2056 drv_conf_tx(local, sdata, ac, ¶ms[ac])) 2057 sdata_err(sdata, 2058 "failed to set TX queue parameters for AC %d\n", 2059 ac); 2060 } 2061 2062 /* enable WMM or activate new settings */ 2063 sdata->vif.bss_conf.qos = true; 2064 return true; 2065 } 2066 2067 static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata) 2068 { 2069 lockdep_assert_held(&sdata->local->mtx); 2070 2071 sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL; 2072 ieee80211_run_deferred_scan(sdata->local); 2073 } 2074 2075 static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata) 2076 { 2077 mutex_lock(&sdata->local->mtx); 2078 __ieee80211_stop_poll(sdata); 2079 mutex_unlock(&sdata->local->mtx); 2080 } 2081 2082 static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata, 2083 u16 capab, bool erp_valid, u8 erp) 2084 { 2085 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; 2086 struct ieee80211_supported_band *sband; 2087 u32 changed = 0; 2088 bool use_protection; 2089 bool use_short_preamble; 2090 bool use_short_slot; 2091 2092 sband = ieee80211_get_sband(sdata); 2093 if (!sband) 2094 return changed; 2095 2096 if (erp_valid) { 2097 use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0; 2098 use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0; 2099 } else { 2100 use_protection = false; 2101 use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE); 2102 } 2103 2104 use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME); 2105 if (sband->band == NL80211_BAND_5GHZ) 2106 use_short_slot = true; 2107 2108 if (use_protection != bss_conf->use_cts_prot) { 2109 bss_conf->use_cts_prot = use_protection; 2110 changed |= BSS_CHANGED_ERP_CTS_PROT; 2111 } 2112 2113 if (use_short_preamble != bss_conf->use_short_preamble) { 2114 bss_conf->use_short_preamble = use_short_preamble; 2115 changed |= BSS_CHANGED_ERP_PREAMBLE; 2116 } 2117 2118 if (use_short_slot != bss_conf->use_short_slot) { 2119 bss_conf->use_short_slot = use_short_slot; 2120 changed |= BSS_CHANGED_ERP_SLOT; 2121 } 2122 2123 return changed; 2124 } 2125 2126 static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, 2127 struct cfg80211_bss *cbss, 2128 u32 bss_info_changed) 2129 { 2130 struct ieee80211_bss *bss = (void *)cbss->priv; 2131 struct ieee80211_local *local = sdata->local; 2132 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; 2133 2134 bss_info_changed |= BSS_CHANGED_ASSOC; 2135 bss_info_changed |= ieee80211_handle_bss_capability(sdata, 2136 bss_conf->assoc_capability, bss->has_erp_value, bss->erp_value); 2137 2138 sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec( 2139 beacon_loss_count * bss_conf->beacon_int)); 2140 2141 sdata->u.mgd.associated = cbss; 2142 memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN); 2143 2144 ieee80211_check_rate_mask(sdata); 2145 2146 sdata->u.mgd.flags |= IEEE80211_STA_RESET_SIGNAL_AVE; 2147 2148 if (sdata->vif.p2p || 2149 sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) { 2150 const struct cfg80211_bss_ies *ies; 2151 2152 rcu_read_lock(); 2153 ies = rcu_dereference(cbss->ies); 2154 if (ies) { 2155 int ret; 2156 2157 ret = cfg80211_get_p2p_attr( 2158 ies->data, ies->len, 2159 IEEE80211_P2P_ATTR_ABSENCE_NOTICE, 2160 (u8 *) &bss_conf->p2p_noa_attr, 2161 sizeof(bss_conf->p2p_noa_attr)); 2162 if (ret >= 2) { 2163 sdata->u.mgd.p2p_noa_index = 2164 bss_conf->p2p_noa_attr.index; 2165 bss_info_changed |= BSS_CHANGED_P2P_PS; 2166 } 2167 } 2168 rcu_read_unlock(); 2169 } 2170 2171 /* just to be sure */ 2172 ieee80211_stop_poll(sdata); 2173 2174 ieee80211_led_assoc(local, 1); 2175 2176 if (sdata->u.mgd.have_beacon) { 2177 /* 2178 * If the AP is buggy we may get here with no DTIM period 2179 * known, so assume it's 1 which is the only safe assumption 2180 * in that case, although if the TIM IE is broken powersave 2181 * probably just won't work at all. 2182 */ 2183 bss_conf->dtim_period = sdata->u.mgd.dtim_period ?: 1; 2184 bss_conf->beacon_rate = bss->beacon_rate; 2185 bss_info_changed |= BSS_CHANGED_BEACON_INFO; 2186 } else { 2187 bss_conf->beacon_rate = NULL; 2188 bss_conf->dtim_period = 0; 2189 } 2190 2191 bss_conf->assoc = 1; 2192 2193 /* Tell the driver to monitor connection quality (if supported) */ 2194 if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI && 2195 bss_conf->cqm_rssi_thold) 2196 bss_info_changed |= BSS_CHANGED_CQM; 2197 2198 /* Enable ARP filtering */ 2199 if (bss_conf->arp_addr_cnt) 2200 bss_info_changed |= BSS_CHANGED_ARP_FILTER; 2201 2202 ieee80211_bss_info_change_notify(sdata, bss_info_changed); 2203 2204 mutex_lock(&local->iflist_mtx); 2205 ieee80211_recalc_ps(local); 2206 mutex_unlock(&local->iflist_mtx); 2207 2208 ieee80211_recalc_smps(sdata); 2209 ieee80211_recalc_ps_vif(sdata); 2210 2211 netif_carrier_on(sdata->dev); 2212 } 2213 2214 static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, 2215 u16 stype, u16 reason, bool tx, 2216 u8 *frame_buf) 2217 { 2218 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 2219 struct ieee80211_local *local = sdata->local; 2220 u32 changed = 0; 2221 2222 sdata_assert_lock(sdata); 2223 2224 if (WARN_ON_ONCE(tx && !frame_buf)) 2225 return; 2226 2227 if (WARN_ON(!ifmgd->associated)) 2228 return; 2229 2230 ieee80211_stop_poll(sdata); 2231 2232 ifmgd->associated = NULL; 2233 netif_carrier_off(sdata->dev); 2234 2235 /* 2236 * if we want to get out of ps before disassoc (why?) we have 2237 * to do it before sending disassoc, as otherwise the null-packet 2238 * won't be valid. 2239 */ 2240 if (local->hw.conf.flags & IEEE80211_CONF_PS) { 2241 local->hw.conf.flags &= ~IEEE80211_CONF_PS; 2242 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); 2243 } 2244 local->ps_sdata = NULL; 2245 2246 /* disable per-vif ps */ 2247 ieee80211_recalc_ps_vif(sdata); 2248 2249 /* make sure ongoing transmission finishes */ 2250 synchronize_net(); 2251 2252 /* 2253 * drop any frame before deauth/disassoc, this can be data or 2254 * management frame. Since we are disconnecting, we should not 2255 * insist sending these frames which can take time and delay 2256 * the disconnection and possible the roaming. 2257 */ 2258 if (tx) 2259 ieee80211_flush_queues(local, sdata, true); 2260 2261 /* deauthenticate/disassociate now */ 2262 if (tx || frame_buf) { 2263 /* 2264 * In multi channel scenarios guarantee that the virtual 2265 * interface is granted immediate airtime to transmit the 2266 * deauthentication frame by calling mgd_prepare_tx, if the 2267 * driver requested so. 2268 */ 2269 if (ieee80211_hw_check(&local->hw, DEAUTH_NEED_MGD_TX_PREP) && 2270 !ifmgd->have_beacon) 2271 drv_mgd_prepare_tx(sdata->local, sdata, 0); 2272 2273 ieee80211_send_deauth_disassoc(sdata, ifmgd->bssid, stype, 2274 reason, tx, frame_buf); 2275 } 2276 2277 /* flush out frame - make sure the deauth was actually sent */ 2278 if (tx) 2279 ieee80211_flush_queues(local, sdata, false); 2280 2281 /* clear bssid only after building the needed mgmt frames */ 2282 eth_zero_addr(ifmgd->bssid); 2283 2284 /* remove AP and TDLS peers */ 2285 sta_info_flush(sdata); 2286 2287 /* finally reset all BSS / config parameters */ 2288 changed |= ieee80211_reset_erp_info(sdata); 2289 2290 ieee80211_led_assoc(local, 0); 2291 changed |= BSS_CHANGED_ASSOC; 2292 sdata->vif.bss_conf.assoc = false; 2293 2294 ifmgd->p2p_noa_index = -1; 2295 memset(&sdata->vif.bss_conf.p2p_noa_attr, 0, 2296 sizeof(sdata->vif.bss_conf.p2p_noa_attr)); 2297 2298 /* on the next assoc, re-program HT/VHT parameters */ 2299 memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa)); 2300 memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask)); 2301 memset(&ifmgd->vht_capa, 0, sizeof(ifmgd->vht_capa)); 2302 memset(&ifmgd->vht_capa_mask, 0, sizeof(ifmgd->vht_capa_mask)); 2303 2304 /* reset MU-MIMO ownership and group data */ 2305 memset(sdata->vif.bss_conf.mu_group.membership, 0, 2306 sizeof(sdata->vif.bss_conf.mu_group.membership)); 2307 memset(sdata->vif.bss_conf.mu_group.position, 0, 2308 sizeof(sdata->vif.bss_conf.mu_group.position)); 2309 changed |= BSS_CHANGED_MU_GROUPS; 2310 sdata->vif.mu_mimo_owner = false; 2311 2312 sdata->ap_power_level = IEEE80211_UNSET_POWER_LEVEL; 2313 2314 del_timer_sync(&local->dynamic_ps_timer); 2315 cancel_work_sync(&local->dynamic_ps_enable_work); 2316 2317 /* Disable ARP filtering */ 2318 if (sdata->vif.bss_conf.arp_addr_cnt) 2319 changed |= BSS_CHANGED_ARP_FILTER; 2320 2321 sdata->vif.bss_conf.qos = false; 2322 changed |= BSS_CHANGED_QOS; 2323 2324 /* The BSSID (not really interesting) and HT changed */ 2325 changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT; 2326 ieee80211_bss_info_change_notify(sdata, changed); 2327 2328 /* disassociated - set to defaults now */ 2329 ieee80211_set_wmm_default(sdata, false, false); 2330 2331 del_timer_sync(&sdata->u.mgd.conn_mon_timer); 2332 del_timer_sync(&sdata->u.mgd.bcn_mon_timer); 2333 del_timer_sync(&sdata->u.mgd.timer); 2334 del_timer_sync(&sdata->u.mgd.chswitch_timer); 2335 2336 sdata->vif.bss_conf.dtim_period = 0; 2337 sdata->vif.bss_conf.beacon_rate = NULL; 2338 2339 ifmgd->have_beacon = false; 2340 2341 ifmgd->flags = 0; 2342 mutex_lock(&local->mtx); 2343 ieee80211_vif_release_channel(sdata); 2344 2345 sdata->vif.csa_active = false; 2346 ifmgd->csa_waiting_bcn = false; 2347 ifmgd->csa_ignored_same_chan = false; 2348 if (sdata->csa_block_tx) { 2349 ieee80211_wake_vif_queues(local, sdata, 2350 IEEE80211_QUEUE_STOP_REASON_CSA); 2351 sdata->csa_block_tx = false; 2352 } 2353 mutex_unlock(&local->mtx); 2354 2355 /* existing TX TSPEC sessions no longer exist */ 2356 memset(ifmgd->tx_tspec, 0, sizeof(ifmgd->tx_tspec)); 2357 cancel_delayed_work_sync(&ifmgd->tx_tspec_wk); 2358 2359 sdata->encrypt_headroom = IEEE80211_ENCRYPT_HEADROOM; 2360 } 2361 2362 void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata, 2363 struct ieee80211_hdr *hdr) 2364 { 2365 /* 2366 * We can postpone the mgd.timer whenever receiving unicast frames 2367 * from AP because we know that the connection is working both ways 2368 * at that time. But multicast frames (and hence also beacons) must 2369 * be ignored here, because we need to trigger the timer during 2370 * data idle periods for sending the periodic probe request to the 2371 * AP we're connected to. 2372 */ 2373 if (is_multicast_ether_addr(hdr->addr1)) 2374 return; 2375 2376 ieee80211_sta_reset_conn_monitor(sdata); 2377 } 2378 2379 static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata) 2380 { 2381 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 2382 struct ieee80211_local *local = sdata->local; 2383 2384 mutex_lock(&local->mtx); 2385 if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)) 2386 goto out; 2387 2388 __ieee80211_stop_poll(sdata); 2389 2390 mutex_lock(&local->iflist_mtx); 2391 ieee80211_recalc_ps(local); 2392 mutex_unlock(&local->iflist_mtx); 2393 2394 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) 2395 goto out; 2396 2397 /* 2398 * We've received a probe response, but are not sure whether 2399 * we have or will be receiving any beacons or data, so let's 2400 * schedule the timers again, just in case. 2401 */ 2402 ieee80211_sta_reset_beacon_monitor(sdata); 2403 2404 mod_timer(&ifmgd->conn_mon_timer, 2405 round_jiffies_up(jiffies + 2406 IEEE80211_CONNECTION_IDLE_TIME)); 2407 out: 2408 mutex_unlock(&local->mtx); 2409 } 2410 2411 static void ieee80211_sta_tx_wmm_ac_notify(struct ieee80211_sub_if_data *sdata, 2412 struct ieee80211_hdr *hdr, 2413 u16 tx_time) 2414 { 2415 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 2416 u16 tid = ieee80211_get_tid(hdr); 2417 int ac = ieee80211_ac_from_tid(tid); 2418 struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac]; 2419 unsigned long now = jiffies; 2420 2421 if (likely(!tx_tspec->admitted_time)) 2422 return; 2423 2424 if (time_after(now, tx_tspec->time_slice_start + HZ)) { 2425 tx_tspec->consumed_tx_time = 0; 2426 tx_tspec->time_slice_start = now; 2427 2428 if (tx_tspec->downgraded) { 2429 tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE; 2430 schedule_delayed_work(&ifmgd->tx_tspec_wk, 0); 2431 } 2432 } 2433 2434 if (tx_tspec->downgraded) 2435 return; 2436 2437 tx_tspec->consumed_tx_time += tx_time; 2438 2439 if (tx_tspec->consumed_tx_time >= tx_tspec->admitted_time) { 2440 tx_tspec->downgraded = true; 2441 tx_tspec->action = TX_TSPEC_ACTION_DOWNGRADE; 2442 schedule_delayed_work(&ifmgd->tx_tspec_wk, 0); 2443 } 2444 } 2445 2446 void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata, 2447 struct ieee80211_hdr *hdr, bool ack, u16 tx_time) 2448 { 2449 ieee80211_sta_tx_wmm_ac_notify(sdata, hdr, tx_time); 2450 2451 if (!ieee80211_is_data(hdr->frame_control)) 2452 return; 2453 2454 if (ieee80211_is_nullfunc(hdr->frame_control) && 2455 sdata->u.mgd.probe_send_count > 0) { 2456 if (ack) 2457 ieee80211_sta_reset_conn_monitor(sdata); 2458 else 2459 sdata->u.mgd.nullfunc_failed = true; 2460 ieee80211_queue_work(&sdata->local->hw, &sdata->work); 2461 return; 2462 } 2463 2464 if (ack) 2465 ieee80211_sta_reset_conn_monitor(sdata); 2466 } 2467 2468 static void ieee80211_mlme_send_probe_req(struct ieee80211_sub_if_data *sdata, 2469 const u8 *src, const u8 *dst, 2470 const u8 *ssid, size_t ssid_len, 2471 struct ieee80211_channel *channel) 2472 { 2473 struct sk_buff *skb; 2474 2475 skb = ieee80211_build_probe_req(sdata, src, dst, (u32)-1, channel, 2476 ssid, ssid_len, NULL, 0, 2477 IEEE80211_PROBE_FLAG_DIRECTED); 2478 if (skb) 2479 ieee80211_tx_skb(sdata, skb); 2480 } 2481 2482 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata) 2483 { 2484 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 2485 const u8 *ssid; 2486 u8 *dst = ifmgd->associated->bssid; 2487 u8 unicast_limit = max(1, max_probe_tries - 3); 2488 struct sta_info *sta; 2489 2490 /* 2491 * Try sending broadcast probe requests for the last three 2492 * probe requests after the first ones failed since some 2493 * buggy APs only support broadcast probe requests. 2494 */ 2495 if (ifmgd->probe_send_count >= unicast_limit) 2496 dst = NULL; 2497 2498 /* 2499 * When the hardware reports an accurate Tx ACK status, it's 2500 * better to send a nullfunc frame instead of a probe request, 2501 * as it will kick us off the AP quickly if we aren't associated 2502 * anymore. The timeout will be reset if the frame is ACKed by 2503 * the AP. 2504 */ 2505 ifmgd->probe_send_count++; 2506 2507 if (dst) { 2508 mutex_lock(&sdata->local->sta_mtx); 2509 sta = sta_info_get(sdata, dst); 2510 if (!WARN_ON(!sta)) 2511 ieee80211_check_fast_rx(sta); 2512 mutex_unlock(&sdata->local->sta_mtx); 2513 } 2514 2515 if (ieee80211_hw_check(&sdata->local->hw, REPORTS_TX_ACK_STATUS)) { 2516 ifmgd->nullfunc_failed = false; 2517 ieee80211_send_nullfunc(sdata->local, sdata, false); 2518 } else { 2519 int ssid_len; 2520 2521 rcu_read_lock(); 2522 ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID); 2523 if (WARN_ON_ONCE(ssid == NULL)) 2524 ssid_len = 0; 2525 else 2526 ssid_len = ssid[1]; 2527 2528 ieee80211_mlme_send_probe_req(sdata, sdata->vif.addr, dst, 2529 ssid + 2, ssid_len, 2530 ifmgd->associated->channel); 2531 rcu_read_unlock(); 2532 } 2533 2534 ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms); 2535 run_again(sdata, ifmgd->probe_timeout); 2536 } 2537 2538 static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata, 2539 bool beacon) 2540 { 2541 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 2542 bool already = false; 2543 2544 if (!ieee80211_sdata_running(sdata)) 2545 return; 2546 2547 sdata_lock(sdata); 2548 2549 if (!ifmgd->associated) 2550 goto out; 2551 2552 mutex_lock(&sdata->local->mtx); 2553 2554 if (sdata->local->tmp_channel || sdata->local->scanning) { 2555 mutex_unlock(&sdata->local->mtx); 2556 goto out; 2557 } 2558 2559 if (beacon) { 2560 mlme_dbg_ratelimited(sdata, 2561 "detected beacon loss from AP (missed %d beacons) - probing\n", 2562 beacon_loss_count); 2563 2564 ieee80211_cqm_beacon_loss_notify(&sdata->vif, GFP_KERNEL); 2565 } 2566 2567 /* 2568 * The driver/our work has already reported this event or the 2569 * connection monitoring has kicked in and we have already sent 2570 * a probe request. Or maybe the AP died and the driver keeps 2571 * reporting until we disassociate... 2572 * 2573 * In either case we have to ignore the current call to this 2574 * function (except for setting the correct probe reason bit) 2575 * because otherwise we would reset the timer every time and 2576 * never check whether we received a probe response! 2577 */ 2578 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) 2579 already = true; 2580 2581 ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL; 2582 2583 mutex_unlock(&sdata->local->mtx); 2584 2585 if (already) 2586 goto out; 2587 2588 mutex_lock(&sdata->local->iflist_mtx); 2589 ieee80211_recalc_ps(sdata->local); 2590 mutex_unlock(&sdata->local->iflist_mtx); 2591 2592 ifmgd->probe_send_count = 0; 2593 ieee80211_mgd_probe_ap_send(sdata); 2594 out: 2595 sdata_unlock(sdata); 2596 } 2597 2598 struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw, 2599 struct ieee80211_vif *vif) 2600 { 2601 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); 2602 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 2603 struct cfg80211_bss *cbss; 2604 struct sk_buff *skb; 2605 const u8 *ssid; 2606 int ssid_len; 2607 2608 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION)) 2609 return NULL; 2610 2611 sdata_assert_lock(sdata); 2612 2613 if (ifmgd->associated) 2614 cbss = ifmgd->associated; 2615 else if (ifmgd->auth_data) 2616 cbss = ifmgd->auth_data->bss; 2617 else if (ifmgd->assoc_data) 2618 cbss = ifmgd->assoc_data->bss; 2619 else 2620 return NULL; 2621 2622 rcu_read_lock(); 2623 ssid = ieee80211_bss_get_ie(cbss, WLAN_EID_SSID); 2624 if (WARN_ON_ONCE(ssid == NULL)) 2625 ssid_len = 0; 2626 else 2627 ssid_len = ssid[1]; 2628 2629 skb = ieee80211_build_probe_req(sdata, sdata->vif.addr, cbss->bssid, 2630 (u32) -1, cbss->channel, 2631 ssid + 2, ssid_len, 2632 NULL, 0, IEEE80211_PROBE_FLAG_DIRECTED); 2633 rcu_read_unlock(); 2634 2635 return skb; 2636 } 2637 EXPORT_SYMBOL(ieee80211_ap_probereq_get); 2638 2639 static void ieee80211_report_disconnect(struct ieee80211_sub_if_data *sdata, 2640 const u8 *buf, size_t len, bool tx, 2641 u16 reason) 2642 { 2643 struct ieee80211_event event = { 2644 .type = MLME_EVENT, 2645 .u.mlme.data = tx ? DEAUTH_TX_EVENT : DEAUTH_RX_EVENT, 2646 .u.mlme.reason = reason, 2647 }; 2648 2649 if (tx) 2650 cfg80211_tx_mlme_mgmt(sdata->dev, buf, len); 2651 else 2652 cfg80211_rx_mlme_mgmt(sdata->dev, buf, len); 2653 2654 drv_event_callback(sdata->local, sdata, &event); 2655 } 2656 2657 static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) 2658 { 2659 struct ieee80211_local *local = sdata->local; 2660 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 2661 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; 2662 bool tx; 2663 2664 sdata_lock(sdata); 2665 if (!ifmgd->associated) { 2666 sdata_unlock(sdata); 2667 return; 2668 } 2669 2670 tx = !sdata->csa_block_tx; 2671 2672 /* AP is probably out of range (or not reachable for another reason) so 2673 * remove the bss struct for that AP. 2674 */ 2675 cfg80211_unlink_bss(local->hw.wiphy, ifmgd->associated); 2676 2677 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, 2678 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, 2679 tx, frame_buf); 2680 mutex_lock(&local->mtx); 2681 sdata->vif.csa_active = false; 2682 ifmgd->csa_waiting_bcn = false; 2683 if (sdata->csa_block_tx) { 2684 ieee80211_wake_vif_queues(local, sdata, 2685 IEEE80211_QUEUE_STOP_REASON_CSA); 2686 sdata->csa_block_tx = false; 2687 } 2688 mutex_unlock(&local->mtx); 2689 2690 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), tx, 2691 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY); 2692 2693 sdata_unlock(sdata); 2694 } 2695 2696 static void ieee80211_beacon_connection_loss_work(struct work_struct *work) 2697 { 2698 struct ieee80211_sub_if_data *sdata = 2699 container_of(work, struct ieee80211_sub_if_data, 2700 u.mgd.beacon_connection_loss_work); 2701 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 2702 2703 if (ifmgd->associated) 2704 ifmgd->beacon_loss_count++; 2705 2706 if (ifmgd->connection_loss) { 2707 sdata_info(sdata, "Connection to AP %pM lost\n", 2708 ifmgd->bssid); 2709 __ieee80211_disconnect(sdata); 2710 } else { 2711 ieee80211_mgd_probe_ap(sdata, true); 2712 } 2713 } 2714 2715 static void ieee80211_csa_connection_drop_work(struct work_struct *work) 2716 { 2717 struct ieee80211_sub_if_data *sdata = 2718 container_of(work, struct ieee80211_sub_if_data, 2719 u.mgd.csa_connection_drop_work); 2720 2721 __ieee80211_disconnect(sdata); 2722 } 2723 2724 void ieee80211_beacon_loss(struct ieee80211_vif *vif) 2725 { 2726 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); 2727 struct ieee80211_hw *hw = &sdata->local->hw; 2728 2729 trace_api_beacon_loss(sdata); 2730 2731 sdata->u.mgd.connection_loss = false; 2732 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work); 2733 } 2734 EXPORT_SYMBOL(ieee80211_beacon_loss); 2735 2736 void ieee80211_connection_loss(struct ieee80211_vif *vif) 2737 { 2738 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); 2739 struct ieee80211_hw *hw = &sdata->local->hw; 2740 2741 trace_api_connection_loss(sdata); 2742 2743 sdata->u.mgd.connection_loss = true; 2744 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work); 2745 } 2746 EXPORT_SYMBOL(ieee80211_connection_loss); 2747 2748 2749 static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata, 2750 bool assoc) 2751 { 2752 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data; 2753 2754 sdata_assert_lock(sdata); 2755 2756 if (!assoc) { 2757 /* 2758 * we are not authenticated yet, the only timer that could be 2759 * running is the timeout for the authentication response which 2760 * which is not relevant anymore. 2761 */ 2762 del_timer_sync(&sdata->u.mgd.timer); 2763 sta_info_destroy_addr(sdata, auth_data->bss->bssid); 2764 2765 eth_zero_addr(sdata->u.mgd.bssid); 2766 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID); 2767 sdata->u.mgd.flags = 0; 2768 mutex_lock(&sdata->local->mtx); 2769 ieee80211_vif_release_channel(sdata); 2770 mutex_unlock(&sdata->local->mtx); 2771 } 2772 2773 cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss); 2774 kfree(auth_data); 2775 sdata->u.mgd.auth_data = NULL; 2776 } 2777 2778 static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data *sdata, 2779 bool assoc, bool abandon) 2780 { 2781 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data; 2782 2783 sdata_assert_lock(sdata); 2784 2785 if (!assoc) { 2786 /* 2787 * we are not associated yet, the only timer that could be 2788 * running is the timeout for the association response which 2789 * which is not relevant anymore. 2790 */ 2791 del_timer_sync(&sdata->u.mgd.timer); 2792 sta_info_destroy_addr(sdata, assoc_data->bss->bssid); 2793 2794 eth_zero_addr(sdata->u.mgd.bssid); 2795 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID); 2796 sdata->u.mgd.flags = 0; 2797 sdata->vif.mu_mimo_owner = false; 2798 2799 mutex_lock(&sdata->local->mtx); 2800 ieee80211_vif_release_channel(sdata); 2801 mutex_unlock(&sdata->local->mtx); 2802 2803 if (abandon) 2804 cfg80211_abandon_assoc(sdata->dev, assoc_data->bss); 2805 } 2806 2807 kfree(assoc_data); 2808 sdata->u.mgd.assoc_data = NULL; 2809 } 2810 2811 static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata, 2812 struct ieee80211_mgmt *mgmt, size_t len) 2813 { 2814 struct ieee80211_local *local = sdata->local; 2815 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data; 2816 u8 *pos; 2817 struct ieee802_11_elems elems; 2818 u32 tx_flags = 0; 2819 2820 pos = mgmt->u.auth.variable; 2821 ieee802_11_parse_elems(pos, len - (pos - (u8 *)mgmt), false, &elems, 2822 mgmt->bssid, auth_data->bss->bssid); 2823 if (!elems.challenge) 2824 return; 2825 auth_data->expected_transaction = 4; 2826 drv_mgd_prepare_tx(sdata->local, sdata, 0); 2827 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) 2828 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | 2829 IEEE80211_TX_INTFL_MLME_CONN_TX; 2830 ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0, 2831 elems.challenge - 2, elems.challenge_len + 2, 2832 auth_data->bss->bssid, auth_data->bss->bssid, 2833 auth_data->key, auth_data->key_len, 2834 auth_data->key_idx, tx_flags); 2835 } 2836 2837 static bool ieee80211_mark_sta_auth(struct ieee80211_sub_if_data *sdata, 2838 const u8 *bssid) 2839 { 2840 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 2841 struct sta_info *sta; 2842 bool result = true; 2843 2844 sdata_info(sdata, "authenticated\n"); 2845 ifmgd->auth_data->done = true; 2846 ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC; 2847 ifmgd->auth_data->timeout_started = true; 2848 run_again(sdata, ifmgd->auth_data->timeout); 2849 2850 /* move station state to auth */ 2851 mutex_lock(&sdata->local->sta_mtx); 2852 sta = sta_info_get(sdata, bssid); 2853 if (!sta) { 2854 WARN_ONCE(1, "%s: STA %pM not found", sdata->name, bssid); 2855 result = false; 2856 goto out; 2857 } 2858 if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) { 2859 sdata_info(sdata, "failed moving %pM to auth\n", bssid); 2860 result = false; 2861 goto out; 2862 } 2863 2864 out: 2865 mutex_unlock(&sdata->local->sta_mtx); 2866 return result; 2867 } 2868 2869 static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata, 2870 struct ieee80211_mgmt *mgmt, size_t len) 2871 { 2872 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 2873 u8 bssid[ETH_ALEN]; 2874 u16 auth_alg, auth_transaction, status_code; 2875 struct ieee80211_event event = { 2876 .type = MLME_EVENT, 2877 .u.mlme.data = AUTH_EVENT, 2878 }; 2879 2880 sdata_assert_lock(sdata); 2881 2882 if (len < 24 + 6) 2883 return; 2884 2885 if (!ifmgd->auth_data || ifmgd->auth_data->done) 2886 return; 2887 2888 memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN); 2889 2890 if (!ether_addr_equal(bssid, mgmt->bssid)) 2891 return; 2892 2893 auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg); 2894 auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction); 2895 status_code = le16_to_cpu(mgmt->u.auth.status_code); 2896 2897 if (auth_alg != ifmgd->auth_data->algorithm || 2898 (auth_alg != WLAN_AUTH_SAE && 2899 auth_transaction != ifmgd->auth_data->expected_transaction) || 2900 (auth_alg == WLAN_AUTH_SAE && 2901 (auth_transaction < ifmgd->auth_data->expected_transaction || 2902 auth_transaction > 2))) { 2903 sdata_info(sdata, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n", 2904 mgmt->sa, auth_alg, ifmgd->auth_data->algorithm, 2905 auth_transaction, 2906 ifmgd->auth_data->expected_transaction); 2907 return; 2908 } 2909 2910 if (status_code != WLAN_STATUS_SUCCESS) { 2911 sdata_info(sdata, "%pM denied authentication (status %d)\n", 2912 mgmt->sa, status_code); 2913 ieee80211_destroy_auth_data(sdata, false); 2914 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len); 2915 event.u.mlme.status = MLME_DENIED; 2916 event.u.mlme.reason = status_code; 2917 drv_event_callback(sdata->local, sdata, &event); 2918 return; 2919 } 2920 2921 switch (ifmgd->auth_data->algorithm) { 2922 case WLAN_AUTH_OPEN: 2923 case WLAN_AUTH_LEAP: 2924 case WLAN_AUTH_FT: 2925 case WLAN_AUTH_SAE: 2926 case WLAN_AUTH_FILS_SK: 2927 case WLAN_AUTH_FILS_SK_PFS: 2928 case WLAN_AUTH_FILS_PK: 2929 break; 2930 case WLAN_AUTH_SHARED_KEY: 2931 if (ifmgd->auth_data->expected_transaction != 4) { 2932 ieee80211_auth_challenge(sdata, mgmt, len); 2933 /* need another frame */ 2934 return; 2935 } 2936 break; 2937 default: 2938 WARN_ONCE(1, "invalid auth alg %d", 2939 ifmgd->auth_data->algorithm); 2940 return; 2941 } 2942 2943 event.u.mlme.status = MLME_SUCCESS; 2944 drv_event_callback(sdata->local, sdata, &event); 2945 if (ifmgd->auth_data->algorithm != WLAN_AUTH_SAE || 2946 (auth_transaction == 2 && 2947 ifmgd->auth_data->expected_transaction == 2)) { 2948 if (!ieee80211_mark_sta_auth(sdata, bssid)) 2949 goto out_err; 2950 } else if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE && 2951 auth_transaction == 2) { 2952 sdata_info(sdata, "SAE peer confirmed\n"); 2953 ifmgd->auth_data->peer_confirmed = true; 2954 } 2955 2956 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len); 2957 return; 2958 out_err: 2959 mutex_unlock(&sdata->local->sta_mtx); 2960 /* ignore frame -- wait for timeout */ 2961 } 2962 2963 #define case_WLAN(type) \ 2964 case WLAN_REASON_##type: return #type 2965 2966 const char *ieee80211_get_reason_code_string(u16 reason_code) 2967 { 2968 switch (reason_code) { 2969 case_WLAN(UNSPECIFIED); 2970 case_WLAN(PREV_AUTH_NOT_VALID); 2971 case_WLAN(DEAUTH_LEAVING); 2972 case_WLAN(DISASSOC_DUE_TO_INACTIVITY); 2973 case_WLAN(DISASSOC_AP_BUSY); 2974 case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA); 2975 case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA); 2976 case_WLAN(DISASSOC_STA_HAS_LEFT); 2977 case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH); 2978 case_WLAN(DISASSOC_BAD_POWER); 2979 case_WLAN(DISASSOC_BAD_SUPP_CHAN); 2980 case_WLAN(INVALID_IE); 2981 case_WLAN(MIC_FAILURE); 2982 case_WLAN(4WAY_HANDSHAKE_TIMEOUT); 2983 case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT); 2984 case_WLAN(IE_DIFFERENT); 2985 case_WLAN(INVALID_GROUP_CIPHER); 2986 case_WLAN(INVALID_PAIRWISE_CIPHER); 2987 case_WLAN(INVALID_AKMP); 2988 case_WLAN(UNSUPP_RSN_VERSION); 2989 case_WLAN(INVALID_RSN_IE_CAP); 2990 case_WLAN(IEEE8021X_FAILED); 2991 case_WLAN(CIPHER_SUITE_REJECTED); 2992 case_WLAN(DISASSOC_UNSPECIFIED_QOS); 2993 case_WLAN(DISASSOC_QAP_NO_BANDWIDTH); 2994 case_WLAN(DISASSOC_LOW_ACK); 2995 case_WLAN(DISASSOC_QAP_EXCEED_TXOP); 2996 case_WLAN(QSTA_LEAVE_QBSS); 2997 case_WLAN(QSTA_NOT_USE); 2998 case_WLAN(QSTA_REQUIRE_SETUP); 2999 case_WLAN(QSTA_TIMEOUT); 3000 case_WLAN(QSTA_CIPHER_NOT_SUPP); 3001 case_WLAN(MESH_PEER_CANCELED); 3002 case_WLAN(MESH_MAX_PEERS); 3003 case_WLAN(MESH_CONFIG); 3004 case_WLAN(MESH_CLOSE); 3005 case_WLAN(MESH_MAX_RETRIES); 3006 case_WLAN(MESH_CONFIRM_TIMEOUT); 3007 case_WLAN(MESH_INVALID_GTK); 3008 case_WLAN(MESH_INCONSISTENT_PARAM); 3009 case_WLAN(MESH_INVALID_SECURITY); 3010 case_WLAN(MESH_PATH_ERROR); 3011 case_WLAN(MESH_PATH_NOFORWARD); 3012 case_WLAN(MESH_PATH_DEST_UNREACHABLE); 3013 case_WLAN(MAC_EXISTS_IN_MBSS); 3014 case_WLAN(MESH_CHAN_REGULATORY); 3015 case_WLAN(MESH_CHAN); 3016 default: return "<unknown>"; 3017 } 3018 } 3019 3020 static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata, 3021 struct ieee80211_mgmt *mgmt, size_t len) 3022 { 3023 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 3024 u16 reason_code = le16_to_cpu(mgmt->u.deauth.reason_code); 3025 3026 sdata_assert_lock(sdata); 3027 3028 if (len < 24 + 2) 3029 return; 3030 3031 if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) { 3032 ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code); 3033 return; 3034 } 3035 3036 if (ifmgd->associated && 3037 ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) { 3038 const u8 *bssid = ifmgd->associated->bssid; 3039 3040 sdata_info(sdata, "deauthenticated from %pM (Reason: %u=%s)\n", 3041 bssid, reason_code, 3042 ieee80211_get_reason_code_string(reason_code)); 3043 3044 ieee80211_set_disassoc(sdata, 0, 0, false, NULL); 3045 3046 ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, 3047 reason_code); 3048 return; 3049 } 3050 3051 if (ifmgd->assoc_data && 3052 ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) { 3053 const u8 *bssid = ifmgd->assoc_data->bss->bssid; 3054 3055 sdata_info(sdata, 3056 "deauthenticated from %pM while associating (Reason: %u=%s)\n", 3057 bssid, reason_code, 3058 ieee80211_get_reason_code_string(reason_code)); 3059 3060 ieee80211_destroy_assoc_data(sdata, false, true); 3061 3062 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len); 3063 return; 3064 } 3065 } 3066 3067 3068 static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata, 3069 struct ieee80211_mgmt *mgmt, size_t len) 3070 { 3071 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 3072 u16 reason_code; 3073 3074 sdata_assert_lock(sdata); 3075 3076 if (len < 24 + 2) 3077 return; 3078 3079 if (!ifmgd->associated || 3080 !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) 3081 return; 3082 3083 reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code); 3084 3085 if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) { 3086 ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code); 3087 return; 3088 } 3089 3090 sdata_info(sdata, "disassociated from %pM (Reason: %u=%s)\n", 3091 mgmt->sa, reason_code, 3092 ieee80211_get_reason_code_string(reason_code)); 3093 3094 ieee80211_set_disassoc(sdata, 0, 0, false, NULL); 3095 3096 ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, reason_code); 3097 } 3098 3099 static void ieee80211_get_rates(struct ieee80211_supported_band *sband, 3100 u8 *supp_rates, unsigned int supp_rates_len, 3101 u32 *rates, u32 *basic_rates, 3102 bool *have_higher_than_11mbit, 3103 int *min_rate, int *min_rate_index, 3104 int shift) 3105 { 3106 int i, j; 3107 3108 for (i = 0; i < supp_rates_len; i++) { 3109 int rate = supp_rates[i] & 0x7f; 3110 bool is_basic = !!(supp_rates[i] & 0x80); 3111 3112 if ((rate * 5 * (1 << shift)) > 110) 3113 *have_higher_than_11mbit = true; 3114 3115 /* 3116 * Skip HT and VHT BSS membership selectors since they're not 3117 * rates. 3118 * 3119 * Note: Even though the membership selector and the basic 3120 * rate flag share the same bit, they are not exactly 3121 * the same. 3122 */ 3123 if (supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HT_PHY) || 3124 supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_VHT_PHY)) 3125 continue; 3126 3127 for (j = 0; j < sband->n_bitrates; j++) { 3128 struct ieee80211_rate *br; 3129 int brate; 3130 3131 br = &sband->bitrates[j]; 3132 3133 brate = DIV_ROUND_UP(br->bitrate, (1 << shift) * 5); 3134 if (brate == rate) { 3135 *rates |= BIT(j); 3136 if (is_basic) 3137 *basic_rates |= BIT(j); 3138 if ((rate * 5) < *min_rate) { 3139 *min_rate = rate * 5; 3140 *min_rate_index = j; 3141 } 3142 break; 3143 } 3144 } 3145 } 3146 } 3147 3148 static bool ieee80211_twt_req_supported(const struct sta_info *sta, 3149 const struct ieee802_11_elems *elems) 3150 { 3151 if (elems->ext_capab_len < 10) 3152 return false; 3153 3154 if (!(elems->ext_capab[9] & WLAN_EXT_CAPA10_TWT_RESPONDER_SUPPORT)) 3155 return false; 3156 3157 return sta->sta.he_cap.he_cap_elem.mac_cap_info[0] & 3158 IEEE80211_HE_MAC_CAP0_TWT_RES; 3159 } 3160 3161 static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, 3162 struct cfg80211_bss *cbss, 3163 struct ieee80211_mgmt *mgmt, size_t len) 3164 { 3165 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 3166 struct ieee80211_local *local = sdata->local; 3167 struct ieee80211_supported_band *sband; 3168 struct sta_info *sta; 3169 u8 *pos; 3170 u16 capab_info, aid; 3171 struct ieee802_11_elems elems; 3172 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; 3173 const struct cfg80211_bss_ies *bss_ies = NULL; 3174 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; 3175 u32 changed = 0; 3176 int err; 3177 bool ret; 3178 3179 /* AssocResp and ReassocResp have identical structure */ 3180 3181 aid = le16_to_cpu(mgmt->u.assoc_resp.aid); 3182 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info); 3183 3184 /* 3185 * The 5 MSB of the AID field are reserved 3186 * (802.11-2016 9.4.1.8 AID field) 3187 */ 3188 aid &= 0x7ff; 3189 3190 ifmgd->broken_ap = false; 3191 3192 if (aid == 0 || aid > IEEE80211_MAX_AID) { 3193 sdata_info(sdata, "invalid AID value %d (out of range), turn off PS\n", 3194 aid); 3195 aid = 0; 3196 ifmgd->broken_ap = true; 3197 } 3198 3199 pos = mgmt->u.assoc_resp.variable; 3200 ieee802_11_parse_elems(pos, len - (pos - (u8 *)mgmt), false, &elems, 3201 mgmt->bssid, assoc_data->bss->bssid); 3202 3203 if (!elems.supp_rates) { 3204 sdata_info(sdata, "no SuppRates element in AssocResp\n"); 3205 return false; 3206 } 3207 3208 ifmgd->aid = aid; 3209 ifmgd->tdls_chan_switch_prohibited = 3210 elems.ext_capab && elems.ext_capab_len >= 5 && 3211 (elems.ext_capab[4] & WLAN_EXT_CAPA5_TDLS_CH_SW_PROHIBITED); 3212 3213 /* 3214 * Some APs are erroneously not including some information in their 3215 * (re)association response frames. Try to recover by using the data 3216 * from the beacon or probe response. This seems to afflict mobile 3217 * 2G/3G/4G wifi routers, reported models include the "Onda PN51T", 3218 * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device. 3219 */ 3220 if ((assoc_data->wmm && !elems.wmm_param) || 3221 (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && 3222 (!elems.ht_cap_elem || !elems.ht_operation)) || 3223 (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && 3224 (!elems.vht_cap_elem || !elems.vht_operation))) { 3225 const struct cfg80211_bss_ies *ies; 3226 struct ieee802_11_elems bss_elems; 3227 3228 rcu_read_lock(); 3229 ies = rcu_dereference(cbss->ies); 3230 if (ies) 3231 bss_ies = kmemdup(ies, sizeof(*ies) + ies->len, 3232 GFP_ATOMIC); 3233 rcu_read_unlock(); 3234 if (!bss_ies) 3235 return false; 3236 3237 ieee802_11_parse_elems(bss_ies->data, bss_ies->len, 3238 false, &bss_elems, 3239 mgmt->bssid, 3240 assoc_data->bss->bssid); 3241 if (assoc_data->wmm && 3242 !elems.wmm_param && bss_elems.wmm_param) { 3243 elems.wmm_param = bss_elems.wmm_param; 3244 sdata_info(sdata, 3245 "AP bug: WMM param missing from AssocResp\n"); 3246 } 3247 3248 /* 3249 * Also check if we requested HT/VHT, otherwise the AP doesn't 3250 * have to include the IEs in the (re)association response. 3251 */ 3252 if (!elems.ht_cap_elem && bss_elems.ht_cap_elem && 3253 !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) { 3254 elems.ht_cap_elem = bss_elems.ht_cap_elem; 3255 sdata_info(sdata, 3256 "AP bug: HT capability missing from AssocResp\n"); 3257 } 3258 if (!elems.ht_operation && bss_elems.ht_operation && 3259 !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) { 3260 elems.ht_operation = bss_elems.ht_operation; 3261 sdata_info(sdata, 3262 "AP bug: HT operation missing from AssocResp\n"); 3263 } 3264 if (!elems.vht_cap_elem && bss_elems.vht_cap_elem && 3265 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) { 3266 elems.vht_cap_elem = bss_elems.vht_cap_elem; 3267 sdata_info(sdata, 3268 "AP bug: VHT capa missing from AssocResp\n"); 3269 } 3270 if (!elems.vht_operation && bss_elems.vht_operation && 3271 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) { 3272 elems.vht_operation = bss_elems.vht_operation; 3273 sdata_info(sdata, 3274 "AP bug: VHT operation missing from AssocResp\n"); 3275 } 3276 } 3277 3278 /* 3279 * We previously checked these in the beacon/probe response, so 3280 * they should be present here. This is just a safety net. 3281 */ 3282 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && 3283 (!elems.wmm_param || !elems.ht_cap_elem || !elems.ht_operation)) { 3284 sdata_info(sdata, 3285 "HT AP is missing WMM params or HT capability/operation\n"); 3286 ret = false; 3287 goto out; 3288 } 3289 3290 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && 3291 (!elems.vht_cap_elem || !elems.vht_operation)) { 3292 sdata_info(sdata, 3293 "VHT AP is missing VHT capability/operation\n"); 3294 ret = false; 3295 goto out; 3296 } 3297 3298 mutex_lock(&sdata->local->sta_mtx); 3299 /* 3300 * station info was already allocated and inserted before 3301 * the association and should be available to us 3302 */ 3303 sta = sta_info_get(sdata, cbss->bssid); 3304 if (WARN_ON(!sta)) { 3305 mutex_unlock(&sdata->local->sta_mtx); 3306 ret = false; 3307 goto out; 3308 } 3309 3310 sband = ieee80211_get_sband(sdata); 3311 if (!sband) { 3312 mutex_unlock(&sdata->local->sta_mtx); 3313 ret = false; 3314 goto out; 3315 } 3316 3317 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE) && 3318 (!elems.he_cap || !elems.he_operation)) { 3319 mutex_unlock(&sdata->local->sta_mtx); 3320 sdata_info(sdata, 3321 "HE AP is missing HE capability/operation\n"); 3322 ret = false; 3323 goto out; 3324 } 3325 3326 /* Set up internal HT/VHT capabilities */ 3327 if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) 3328 ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, 3329 elems.ht_cap_elem, sta); 3330 3331 if (elems.vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) 3332 ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, 3333 elems.vht_cap_elem, sta); 3334 3335 if (elems.he_operation && !(ifmgd->flags & IEEE80211_STA_DISABLE_HE) && 3336 elems.he_cap) { 3337 ieee80211_he_cap_ie_to_sta_he_cap(sdata, sband, 3338 elems.he_cap, 3339 elems.he_cap_len, 3340 sta); 3341 3342 bss_conf->he_support = sta->sta.he_cap.has_he; 3343 bss_conf->twt_requester = 3344 ieee80211_twt_req_supported(sta, &elems); 3345 } else { 3346 bss_conf->he_support = false; 3347 bss_conf->twt_requester = false; 3348 } 3349 3350 if (bss_conf->he_support) { 3351 bss_conf->bss_color = 3352 le32_get_bits(elems.he_operation->he_oper_params, 3353 IEEE80211_HE_OPERATION_BSS_COLOR_MASK); 3354 3355 bss_conf->htc_trig_based_pkt_ext = 3356 le32_get_bits(elems.he_operation->he_oper_params, 3357 IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK); 3358 bss_conf->frame_time_rts_th = 3359 le32_get_bits(elems.he_operation->he_oper_params, 3360 IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK); 3361 3362 bss_conf->multi_sta_back_32bit = 3363 sta->sta.he_cap.he_cap_elem.mac_cap_info[2] & 3364 IEEE80211_HE_MAC_CAP2_32BIT_BA_BITMAP; 3365 3366 bss_conf->ack_enabled = 3367 sta->sta.he_cap.he_cap_elem.mac_cap_info[2] & 3368 IEEE80211_HE_MAC_CAP2_ACK_EN; 3369 3370 bss_conf->uora_exists = !!elems.uora_element; 3371 if (elems.uora_element) 3372 bss_conf->uora_ocw_range = elems.uora_element[0]; 3373 3374 /* TODO: OPEN: what happens if BSS color disable is set? */ 3375 } 3376 3377 if (cbss->transmitted_bss) { 3378 bss_conf->nontransmitted = true; 3379 ether_addr_copy(bss_conf->transmitter_bssid, 3380 cbss->transmitted_bss->bssid); 3381 bss_conf->bssid_indicator = cbss->max_bssid_indicator; 3382 bss_conf->bssid_index = cbss->bssid_index; 3383 } 3384 3385 /* 3386 * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data 3387 * in their association response, so ignore that data for our own 3388 * configuration. If it changed since the last beacon, we'll get the 3389 * next beacon and update then. 3390 */ 3391 3392 /* 3393 * If an operating mode notification IE is present, override the 3394 * NSS calculation (that would be done in rate_control_rate_init()) 3395 * and use the # of streams from that element. 3396 */ 3397 if (elems.opmode_notif && 3398 !(*elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) { 3399 u8 nss; 3400 3401 nss = *elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK; 3402 nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT; 3403 nss += 1; 3404 sta->sta.rx_nss = nss; 3405 } 3406 3407 rate_control_rate_init(sta); 3408 3409 if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) { 3410 set_sta_flag(sta, WLAN_STA_MFP); 3411 sta->sta.mfp = true; 3412 } else { 3413 sta->sta.mfp = false; 3414 } 3415 3416 sta->sta.wme = elems.wmm_param && local->hw.queues >= IEEE80211_NUM_ACS; 3417 3418 err = sta_info_move_state(sta, IEEE80211_STA_ASSOC); 3419 if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT)) 3420 err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED); 3421 if (err) { 3422 sdata_info(sdata, 3423 "failed to move station %pM to desired state\n", 3424 sta->sta.addr); 3425 WARN_ON(__sta_info_destroy(sta)); 3426 mutex_unlock(&sdata->local->sta_mtx); 3427 ret = false; 3428 goto out; 3429 } 3430 3431 mutex_unlock(&sdata->local->sta_mtx); 3432 3433 /* 3434 * Always handle WMM once after association regardless 3435 * of the first value the AP uses. Setting -1 here has 3436 * that effect because the AP values is an unsigned 3437 * 4-bit value. 3438 */ 3439 ifmgd->wmm_last_param_set = -1; 3440 ifmgd->mu_edca_last_param_set = -1; 3441 3442 if (ifmgd->flags & IEEE80211_STA_DISABLE_WMM) { 3443 ieee80211_set_wmm_default(sdata, false, false); 3444 } else if (!ieee80211_sta_wmm_params(local, sdata, elems.wmm_param, 3445 elems.wmm_param_len, 3446 elems.mu_edca_param_set)) { 3447 /* still enable QoS since we might have HT/VHT */ 3448 ieee80211_set_wmm_default(sdata, false, true); 3449 /* set the disable-WMM flag in this case to disable 3450 * tracking WMM parameter changes in the beacon if 3451 * the parameters weren't actually valid. Doing so 3452 * avoids changing parameters very strangely when 3453 * the AP is going back and forth between valid and 3454 * invalid parameters. 3455 */ 3456 ifmgd->flags |= IEEE80211_STA_DISABLE_WMM; 3457 } 3458 changed |= BSS_CHANGED_QOS; 3459 3460 if (elems.max_idle_period_ie) { 3461 bss_conf->max_idle_period = 3462 le16_to_cpu(elems.max_idle_period_ie->max_idle_period); 3463 bss_conf->protected_keep_alive = 3464 !!(elems.max_idle_period_ie->idle_options & 3465 WLAN_IDLE_OPTIONS_PROTECTED_KEEP_ALIVE); 3466 changed |= BSS_CHANGED_KEEP_ALIVE; 3467 } else { 3468 bss_conf->max_idle_period = 0; 3469 bss_conf->protected_keep_alive = false; 3470 } 3471 3472 /* set AID and assoc capability, 3473 * ieee80211_set_associated() will tell the driver */ 3474 bss_conf->aid = aid; 3475 bss_conf->assoc_capability = capab_info; 3476 ieee80211_set_associated(sdata, cbss, changed); 3477 3478 /* 3479 * If we're using 4-addr mode, let the AP know that we're 3480 * doing so, so that it can create the STA VLAN on its side 3481 */ 3482 if (ifmgd->use_4addr) 3483 ieee80211_send_4addr_nullfunc(local, sdata); 3484 3485 /* 3486 * Start timer to probe the connection to the AP now. 3487 * Also start the timer that will detect beacon loss. 3488 */ 3489 ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt); 3490 ieee80211_sta_reset_beacon_monitor(sdata); 3491 3492 ret = true; 3493 out: 3494 kfree(bss_ies); 3495 return ret; 3496 } 3497 3498 static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, 3499 struct ieee80211_mgmt *mgmt, 3500 size_t len) 3501 { 3502 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 3503 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; 3504 u16 capab_info, status_code, aid; 3505 struct ieee802_11_elems elems; 3506 int ac, uapsd_queues = -1; 3507 u8 *pos; 3508 bool reassoc; 3509 struct cfg80211_bss *bss; 3510 struct ieee80211_event event = { 3511 .type = MLME_EVENT, 3512 .u.mlme.data = ASSOC_EVENT, 3513 }; 3514 3515 sdata_assert_lock(sdata); 3516 3517 if (!assoc_data) 3518 return; 3519 if (!ether_addr_equal(assoc_data->bss->bssid, mgmt->bssid)) 3520 return; 3521 3522 /* 3523 * AssocResp and ReassocResp have identical structure, so process both 3524 * of them in this function. 3525 */ 3526 3527 if (len < 24 + 6) 3528 return; 3529 3530 reassoc = ieee80211_is_reassoc_resp(mgmt->frame_control); 3531 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info); 3532 status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code); 3533 aid = le16_to_cpu(mgmt->u.assoc_resp.aid); 3534 3535 sdata_info(sdata, 3536 "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n", 3537 reassoc ? "Rea" : "A", mgmt->sa, 3538 capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14)))); 3539 3540 if (assoc_data->fils_kek_len && 3541 fils_decrypt_assoc_resp(sdata, (u8 *)mgmt, &len, assoc_data) < 0) 3542 return; 3543 3544 pos = mgmt->u.assoc_resp.variable; 3545 ieee802_11_parse_elems(pos, len - (pos - (u8 *)mgmt), false, &elems, 3546 mgmt->bssid, assoc_data->bss->bssid); 3547 3548 if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY && 3549 elems.timeout_int && 3550 elems.timeout_int->type == WLAN_TIMEOUT_ASSOC_COMEBACK) { 3551 u32 tu, ms; 3552 tu = le32_to_cpu(elems.timeout_int->value); 3553 ms = tu * 1024 / 1000; 3554 sdata_info(sdata, 3555 "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n", 3556 mgmt->sa, tu, ms); 3557 assoc_data->timeout = jiffies + msecs_to_jiffies(ms); 3558 assoc_data->timeout_started = true; 3559 if (ms > IEEE80211_ASSOC_TIMEOUT) 3560 run_again(sdata, assoc_data->timeout); 3561 return; 3562 } 3563 3564 bss = assoc_data->bss; 3565 3566 if (status_code != WLAN_STATUS_SUCCESS) { 3567 sdata_info(sdata, "%pM denied association (code=%d)\n", 3568 mgmt->sa, status_code); 3569 ieee80211_destroy_assoc_data(sdata, false, false); 3570 event.u.mlme.status = MLME_DENIED; 3571 event.u.mlme.reason = status_code; 3572 drv_event_callback(sdata->local, sdata, &event); 3573 } else { 3574 if (!ieee80211_assoc_success(sdata, bss, mgmt, len)) { 3575 /* oops -- internal error -- send timeout for now */ 3576 ieee80211_destroy_assoc_data(sdata, false, false); 3577 cfg80211_assoc_timeout(sdata->dev, bss); 3578 return; 3579 } 3580 event.u.mlme.status = MLME_SUCCESS; 3581 drv_event_callback(sdata->local, sdata, &event); 3582 sdata_info(sdata, "associated\n"); 3583 3584 /* 3585 * destroy assoc_data afterwards, as otherwise an idle 3586 * recalc after assoc_data is NULL but before associated 3587 * is set can cause the interface to go idle 3588 */ 3589 ieee80211_destroy_assoc_data(sdata, true, false); 3590 3591 /* get uapsd queues configuration */ 3592 uapsd_queues = 0; 3593 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) 3594 if (sdata->tx_conf[ac].uapsd) 3595 uapsd_queues |= ieee80211_ac_to_qos_mask[ac]; 3596 } 3597 3598 cfg80211_rx_assoc_resp(sdata->dev, bss, (u8 *)mgmt, len, uapsd_queues, 3599 ifmgd->assoc_req_ies, ifmgd->assoc_req_ies_len); 3600 } 3601 3602 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, 3603 struct ieee80211_mgmt *mgmt, size_t len, 3604 struct ieee80211_rx_status *rx_status) 3605 { 3606 struct ieee80211_local *local = sdata->local; 3607 struct ieee80211_bss *bss; 3608 struct ieee80211_channel *channel; 3609 3610 sdata_assert_lock(sdata); 3611 3612 channel = ieee80211_get_channel(local->hw.wiphy, rx_status->freq); 3613 if (!channel) 3614 return; 3615 3616 bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, channel); 3617 if (bss) { 3618 sdata->vif.bss_conf.beacon_rate = bss->beacon_rate; 3619 ieee80211_rx_bss_put(local, bss); 3620 } 3621 } 3622 3623 3624 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata, 3625 struct sk_buff *skb) 3626 { 3627 struct ieee80211_mgmt *mgmt = (void *)skb->data; 3628 struct ieee80211_if_managed *ifmgd; 3629 struct ieee80211_rx_status *rx_status = (void *) skb->cb; 3630 size_t baselen, len = skb->len; 3631 3632 ifmgd = &sdata->u.mgd; 3633 3634 sdata_assert_lock(sdata); 3635 3636 if (!ether_addr_equal(mgmt->da, sdata->vif.addr)) 3637 return; /* ignore ProbeResp to foreign address */ 3638 3639 baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt; 3640 if (baselen > len) 3641 return; 3642 3643 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status); 3644 3645 if (ifmgd->associated && 3646 ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) 3647 ieee80211_reset_ap_probe(sdata); 3648 } 3649 3650 /* 3651 * This is the canonical list of information elements we care about, 3652 * the filter code also gives us all changes to the Microsoft OUI 3653 * (00:50:F2) vendor IE which is used for WMM which we need to track, 3654 * as well as the DTPC IE (part of the Cisco OUI) used for signaling 3655 * changes to requested client power. 3656 * 3657 * We implement beacon filtering in software since that means we can 3658 * avoid processing the frame here and in cfg80211, and userspace 3659 * will not be able to tell whether the hardware supports it or not. 3660 * 3661 * XXX: This list needs to be dynamic -- userspace needs to be able to 3662 * add items it requires. It also needs to be able to tell us to 3663 * look out for other vendor IEs. 3664 */ 3665 static const u64 care_about_ies = 3666 (1ULL << WLAN_EID_COUNTRY) | 3667 (1ULL << WLAN_EID_ERP_INFO) | 3668 (1ULL << WLAN_EID_CHANNEL_SWITCH) | 3669 (1ULL << WLAN_EID_PWR_CONSTRAINT) | 3670 (1ULL << WLAN_EID_HT_CAPABILITY) | 3671 (1ULL << WLAN_EID_HT_OPERATION) | 3672 (1ULL << WLAN_EID_EXT_CHANSWITCH_ANN); 3673 3674 static void ieee80211_handle_beacon_sig(struct ieee80211_sub_if_data *sdata, 3675 struct ieee80211_if_managed *ifmgd, 3676 struct ieee80211_bss_conf *bss_conf, 3677 struct ieee80211_local *local, 3678 struct ieee80211_rx_status *rx_status) 3679 { 3680 /* Track average RSSI from the Beacon frames of the current AP */ 3681 3682 if (ifmgd->flags & IEEE80211_STA_RESET_SIGNAL_AVE) { 3683 ifmgd->flags &= ~IEEE80211_STA_RESET_SIGNAL_AVE; 3684 ewma_beacon_signal_init(&ifmgd->ave_beacon_signal); 3685 ifmgd->last_cqm_event_signal = 0; 3686 ifmgd->count_beacon_signal = 1; 3687 ifmgd->last_ave_beacon_signal = 0; 3688 } else { 3689 ifmgd->count_beacon_signal++; 3690 } 3691 3692 ewma_beacon_signal_add(&ifmgd->ave_beacon_signal, -rx_status->signal); 3693 3694 if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold && 3695 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) { 3696 int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal); 3697 int last_sig = ifmgd->last_ave_beacon_signal; 3698 struct ieee80211_event event = { 3699 .type = RSSI_EVENT, 3700 }; 3701 3702 /* 3703 * if signal crosses either of the boundaries, invoke callback 3704 * with appropriate parameters 3705 */ 3706 if (sig > ifmgd->rssi_max_thold && 3707 (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) { 3708 ifmgd->last_ave_beacon_signal = sig; 3709 event.u.rssi.data = RSSI_EVENT_HIGH; 3710 drv_event_callback(local, sdata, &event); 3711 } else if (sig < ifmgd->rssi_min_thold && 3712 (last_sig >= ifmgd->rssi_max_thold || 3713 last_sig == 0)) { 3714 ifmgd->last_ave_beacon_signal = sig; 3715 event.u.rssi.data = RSSI_EVENT_LOW; 3716 drv_event_callback(local, sdata, &event); 3717 } 3718 } 3719 3720 if (bss_conf->cqm_rssi_thold && 3721 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT && 3722 !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) { 3723 int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal); 3724 int last_event = ifmgd->last_cqm_event_signal; 3725 int thold = bss_conf->cqm_rssi_thold; 3726 int hyst = bss_conf->cqm_rssi_hyst; 3727 3728 if (sig < thold && 3729 (last_event == 0 || sig < last_event - hyst)) { 3730 ifmgd->last_cqm_event_signal = sig; 3731 ieee80211_cqm_rssi_notify( 3732 &sdata->vif, 3733 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, 3734 sig, GFP_KERNEL); 3735 } else if (sig > thold && 3736 (last_event == 0 || sig > last_event + hyst)) { 3737 ifmgd->last_cqm_event_signal = sig; 3738 ieee80211_cqm_rssi_notify( 3739 &sdata->vif, 3740 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, 3741 sig, GFP_KERNEL); 3742 } 3743 } 3744 3745 if (bss_conf->cqm_rssi_low && 3746 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) { 3747 int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal); 3748 int last_event = ifmgd->last_cqm_event_signal; 3749 int low = bss_conf->cqm_rssi_low; 3750 int high = bss_conf->cqm_rssi_high; 3751 3752 if (sig < low && 3753 (last_event == 0 || last_event >= low)) { 3754 ifmgd->last_cqm_event_signal = sig; 3755 ieee80211_cqm_rssi_notify( 3756 &sdata->vif, 3757 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, 3758 sig, GFP_KERNEL); 3759 } else if (sig > high && 3760 (last_event == 0 || last_event <= high)) { 3761 ifmgd->last_cqm_event_signal = sig; 3762 ieee80211_cqm_rssi_notify( 3763 &sdata->vif, 3764 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, 3765 sig, GFP_KERNEL); 3766 } 3767 } 3768 } 3769 3770 static bool ieee80211_rx_our_beacon(const u8 *tx_bssid, 3771 struct cfg80211_bss *bss) 3772 { 3773 if (ether_addr_equal(tx_bssid, bss->bssid)) 3774 return true; 3775 if (!bss->transmitted_bss) 3776 return false; 3777 return ether_addr_equal(tx_bssid, bss->transmitted_bss->bssid); 3778 } 3779 3780 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, 3781 struct ieee80211_mgmt *mgmt, size_t len, 3782 struct ieee80211_rx_status *rx_status) 3783 { 3784 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 3785 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; 3786 size_t baselen; 3787 struct ieee802_11_elems elems; 3788 struct ieee80211_local *local = sdata->local; 3789 struct ieee80211_chanctx_conf *chanctx_conf; 3790 struct ieee80211_channel *chan; 3791 struct sta_info *sta; 3792 u32 changed = 0; 3793 bool erp_valid; 3794 u8 erp_value = 0; 3795 u32 ncrc; 3796 u8 *bssid; 3797 u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN]; 3798 3799 sdata_assert_lock(sdata); 3800 3801 /* Process beacon from the current BSS */ 3802 baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt; 3803 if (baselen > len) 3804 return; 3805 3806 rcu_read_lock(); 3807 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); 3808 if (!chanctx_conf) { 3809 rcu_read_unlock(); 3810 return; 3811 } 3812 3813 if (rx_status->freq != chanctx_conf->def.chan->center_freq) { 3814 rcu_read_unlock(); 3815 return; 3816 } 3817 chan = chanctx_conf->def.chan; 3818 rcu_read_unlock(); 3819 3820 if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon && 3821 ieee80211_rx_our_beacon(mgmt->bssid, ifmgd->assoc_data->bss)) { 3822 ieee802_11_parse_elems(mgmt->u.beacon.variable, 3823 len - baselen, false, &elems, 3824 mgmt->bssid, 3825 ifmgd->assoc_data->bss->bssid); 3826 3827 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status); 3828 3829 if (elems.dtim_period) 3830 ifmgd->dtim_period = elems.dtim_period; 3831 ifmgd->have_beacon = true; 3832 ifmgd->assoc_data->need_beacon = false; 3833 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) { 3834 sdata->vif.bss_conf.sync_tsf = 3835 le64_to_cpu(mgmt->u.beacon.timestamp); 3836 sdata->vif.bss_conf.sync_device_ts = 3837 rx_status->device_timestamp; 3838 sdata->vif.bss_conf.sync_dtim_count = elems.dtim_count; 3839 } 3840 3841 if (elems.mbssid_config_ie) 3842 bss_conf->profile_periodicity = 3843 elems.mbssid_config_ie->profile_periodicity; 3844 3845 if (elems.ext_capab_len >= 11 && 3846 (elems.ext_capab[10] & WLAN_EXT_CAPA11_EMA_SUPPORT)) 3847 bss_conf->ema_ap = true; 3848 3849 /* continue assoc process */ 3850 ifmgd->assoc_data->timeout = jiffies; 3851 ifmgd->assoc_data->timeout_started = true; 3852 run_again(sdata, ifmgd->assoc_data->timeout); 3853 return; 3854 } 3855 3856 if (!ifmgd->associated || 3857 !ieee80211_rx_our_beacon(mgmt->bssid, ifmgd->associated)) 3858 return; 3859 bssid = ifmgd->associated->bssid; 3860 3861 if (!(rx_status->flag & RX_FLAG_NO_SIGNAL_VAL)) 3862 ieee80211_handle_beacon_sig(sdata, ifmgd, bss_conf, 3863 local, rx_status); 3864 3865 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) { 3866 mlme_dbg_ratelimited(sdata, 3867 "cancelling AP probe due to a received beacon\n"); 3868 ieee80211_reset_ap_probe(sdata); 3869 } 3870 3871 /* 3872 * Push the beacon loss detection into the future since 3873 * we are processing a beacon from the AP just now. 3874 */ 3875 ieee80211_sta_reset_beacon_monitor(sdata); 3876 3877 ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4); 3878 ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable, 3879 len - baselen, false, &elems, 3880 care_about_ies, ncrc, 3881 mgmt->bssid, bssid); 3882 3883 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) && 3884 ieee80211_check_tim(elems.tim, elems.tim_len, ifmgd->aid)) { 3885 if (local->hw.conf.dynamic_ps_timeout > 0) { 3886 if (local->hw.conf.flags & IEEE80211_CONF_PS) { 3887 local->hw.conf.flags &= ~IEEE80211_CONF_PS; 3888 ieee80211_hw_config(local, 3889 IEEE80211_CONF_CHANGE_PS); 3890 } 3891 ieee80211_send_nullfunc(local, sdata, false); 3892 } else if (!local->pspolling && sdata->u.mgd.powersave) { 3893 local->pspolling = true; 3894 3895 /* 3896 * Here is assumed that the driver will be 3897 * able to send ps-poll frame and receive a 3898 * response even though power save mode is 3899 * enabled, but some drivers might require 3900 * to disable power save here. This needs 3901 * to be investigated. 3902 */ 3903 ieee80211_send_pspoll(local, sdata); 3904 } 3905 } 3906 3907 if (sdata->vif.p2p || 3908 sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) { 3909 struct ieee80211_p2p_noa_attr noa = {}; 3910 int ret; 3911 3912 ret = cfg80211_get_p2p_attr(mgmt->u.beacon.variable, 3913 len - baselen, 3914 IEEE80211_P2P_ATTR_ABSENCE_NOTICE, 3915 (u8 *) &noa, sizeof(noa)); 3916 if (ret >= 2) { 3917 if (sdata->u.mgd.p2p_noa_index != noa.index) { 3918 /* valid noa_attr and index changed */ 3919 sdata->u.mgd.p2p_noa_index = noa.index; 3920 memcpy(&bss_conf->p2p_noa_attr, &noa, sizeof(noa)); 3921 changed |= BSS_CHANGED_P2P_PS; 3922 /* 3923 * make sure we update all information, the CRC 3924 * mechanism doesn't look at P2P attributes. 3925 */ 3926 ifmgd->beacon_crc_valid = false; 3927 } 3928 } else if (sdata->u.mgd.p2p_noa_index != -1) { 3929 /* noa_attr not found and we had valid noa_attr before */ 3930 sdata->u.mgd.p2p_noa_index = -1; 3931 memset(&bss_conf->p2p_noa_attr, 0, sizeof(bss_conf->p2p_noa_attr)); 3932 changed |= BSS_CHANGED_P2P_PS; 3933 ifmgd->beacon_crc_valid = false; 3934 } 3935 } 3936 3937 if (ifmgd->csa_waiting_bcn) 3938 ieee80211_chswitch_post_beacon(sdata); 3939 3940 /* 3941 * Update beacon timing and dtim count on every beacon appearance. This 3942 * will allow the driver to use the most updated values. Do it before 3943 * comparing this one with last received beacon. 3944 * IMPORTANT: These parameters would possibly be out of sync by the time 3945 * the driver will use them. The synchronized view is currently 3946 * guaranteed only in certain callbacks. 3947 */ 3948 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) { 3949 sdata->vif.bss_conf.sync_tsf = 3950 le64_to_cpu(mgmt->u.beacon.timestamp); 3951 sdata->vif.bss_conf.sync_device_ts = 3952 rx_status->device_timestamp; 3953 sdata->vif.bss_conf.sync_dtim_count = elems.dtim_count; 3954 } 3955 3956 if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid) 3957 return; 3958 ifmgd->beacon_crc = ncrc; 3959 ifmgd->beacon_crc_valid = true; 3960 3961 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status); 3962 3963 ieee80211_sta_process_chanswitch(sdata, rx_status->mactime, 3964 rx_status->device_timestamp, 3965 &elems, true); 3966 3967 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_WMM) && 3968 ieee80211_sta_wmm_params(local, sdata, elems.wmm_param, 3969 elems.wmm_param_len, 3970 elems.mu_edca_param_set)) 3971 changed |= BSS_CHANGED_QOS; 3972 3973 /* 3974 * If we haven't had a beacon before, tell the driver about the 3975 * DTIM period (and beacon timing if desired) now. 3976 */ 3977 if (!ifmgd->have_beacon) { 3978 /* a few bogus AP send dtim_period = 0 or no TIM IE */ 3979 bss_conf->dtim_period = elems.dtim_period ?: 1; 3980 3981 changed |= BSS_CHANGED_BEACON_INFO; 3982 ifmgd->have_beacon = true; 3983 3984 mutex_lock(&local->iflist_mtx); 3985 ieee80211_recalc_ps(local); 3986 mutex_unlock(&local->iflist_mtx); 3987 3988 ieee80211_recalc_ps_vif(sdata); 3989 } 3990 3991 if (elems.erp_info) { 3992 erp_valid = true; 3993 erp_value = elems.erp_info[0]; 3994 } else { 3995 erp_valid = false; 3996 } 3997 changed |= ieee80211_handle_bss_capability(sdata, 3998 le16_to_cpu(mgmt->u.beacon.capab_info), 3999 erp_valid, erp_value); 4000 4001 mutex_lock(&local->sta_mtx); 4002 sta = sta_info_get(sdata, bssid); 4003 4004 if (ieee80211_config_bw(sdata, sta, 4005 elems.ht_cap_elem, elems.ht_operation, 4006 elems.vht_operation, elems.he_operation, 4007 bssid, &changed)) { 4008 mutex_unlock(&local->sta_mtx); 4009 sdata_info(sdata, 4010 "failed to follow AP %pM bandwidth change, disconnect\n", 4011 bssid); 4012 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, 4013 WLAN_REASON_DEAUTH_LEAVING, 4014 true, deauth_buf); 4015 ieee80211_report_disconnect(sdata, deauth_buf, 4016 sizeof(deauth_buf), true, 4017 WLAN_REASON_DEAUTH_LEAVING); 4018 return; 4019 } 4020 4021 if (sta && elems.opmode_notif) 4022 ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif, 4023 rx_status->band); 4024 mutex_unlock(&local->sta_mtx); 4025 4026 changed |= ieee80211_handle_pwr_constr(sdata, chan, mgmt, 4027 elems.country_elem, 4028 elems.country_elem_len, 4029 elems.pwr_constr_elem, 4030 elems.cisco_dtpc_elem); 4031 4032 ieee80211_bss_info_change_notify(sdata, changed); 4033 } 4034 4035 void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, 4036 struct sk_buff *skb) 4037 { 4038 struct ieee80211_rx_status *rx_status; 4039 struct ieee80211_mgmt *mgmt; 4040 u16 fc; 4041 struct ieee802_11_elems elems; 4042 int ies_len; 4043 4044 rx_status = (struct ieee80211_rx_status *) skb->cb; 4045 mgmt = (struct ieee80211_mgmt *) skb->data; 4046 fc = le16_to_cpu(mgmt->frame_control); 4047 4048 sdata_lock(sdata); 4049 4050 switch (fc & IEEE80211_FCTL_STYPE) { 4051 case IEEE80211_STYPE_BEACON: 4052 ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status); 4053 break; 4054 case IEEE80211_STYPE_PROBE_RESP: 4055 ieee80211_rx_mgmt_probe_resp(sdata, skb); 4056 break; 4057 case IEEE80211_STYPE_AUTH: 4058 ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len); 4059 break; 4060 case IEEE80211_STYPE_DEAUTH: 4061 ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len); 4062 break; 4063 case IEEE80211_STYPE_DISASSOC: 4064 ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len); 4065 break; 4066 case IEEE80211_STYPE_ASSOC_RESP: 4067 case IEEE80211_STYPE_REASSOC_RESP: 4068 ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len); 4069 break; 4070 case IEEE80211_STYPE_ACTION: 4071 if (mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) { 4072 ies_len = skb->len - 4073 offsetof(struct ieee80211_mgmt, 4074 u.action.u.chan_switch.variable); 4075 4076 if (ies_len < 0) 4077 break; 4078 4079 /* CSA IE cannot be overridden, no need for BSSID */ 4080 ieee802_11_parse_elems( 4081 mgmt->u.action.u.chan_switch.variable, 4082 ies_len, true, &elems, mgmt->bssid, NULL); 4083 4084 if (elems.parse_error) 4085 break; 4086 4087 ieee80211_sta_process_chanswitch(sdata, 4088 rx_status->mactime, 4089 rx_status->device_timestamp, 4090 &elems, false); 4091 } else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) { 4092 ies_len = skb->len - 4093 offsetof(struct ieee80211_mgmt, 4094 u.action.u.ext_chan_switch.variable); 4095 4096 if (ies_len < 0) 4097 break; 4098 4099 /* 4100 * extended CSA IE can't be overridden, no need for 4101 * BSSID 4102 */ 4103 ieee802_11_parse_elems( 4104 mgmt->u.action.u.ext_chan_switch.variable, 4105 ies_len, true, &elems, mgmt->bssid, NULL); 4106 4107 if (elems.parse_error) 4108 break; 4109 4110 /* for the handling code pretend this was also an IE */ 4111 elems.ext_chansw_ie = 4112 &mgmt->u.action.u.ext_chan_switch.data; 4113 4114 ieee80211_sta_process_chanswitch(sdata, 4115 rx_status->mactime, 4116 rx_status->device_timestamp, 4117 &elems, false); 4118 } 4119 break; 4120 } 4121 sdata_unlock(sdata); 4122 } 4123 4124 static void ieee80211_sta_timer(struct timer_list *t) 4125 { 4126 struct ieee80211_sub_if_data *sdata = 4127 from_timer(sdata, t, u.mgd.timer); 4128 4129 ieee80211_queue_work(&sdata->local->hw, &sdata->work); 4130 } 4131 4132 static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata, 4133 u8 *bssid, u8 reason, bool tx) 4134 { 4135 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; 4136 4137 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason, 4138 tx, frame_buf); 4139 4140 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true, 4141 reason); 4142 } 4143 4144 static int ieee80211_auth(struct ieee80211_sub_if_data *sdata) 4145 { 4146 struct ieee80211_local *local = sdata->local; 4147 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 4148 struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data; 4149 u32 tx_flags = 0; 4150 u16 trans = 1; 4151 u16 status = 0; 4152 u16 prepare_tx_duration = 0; 4153 4154 sdata_assert_lock(sdata); 4155 4156 if (WARN_ON_ONCE(!auth_data)) 4157 return -EINVAL; 4158 4159 auth_data->tries++; 4160 4161 if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) { 4162 sdata_info(sdata, "authentication with %pM timed out\n", 4163 auth_data->bss->bssid); 4164 4165 /* 4166 * Most likely AP is not in the range so remove the 4167 * bss struct for that AP. 4168 */ 4169 cfg80211_unlink_bss(local->hw.wiphy, auth_data->bss); 4170 4171 return -ETIMEDOUT; 4172 } 4173 4174 if (auth_data->algorithm == WLAN_AUTH_SAE) 4175 prepare_tx_duration = 4176 jiffies_to_msecs(IEEE80211_AUTH_TIMEOUT_SAE); 4177 4178 drv_mgd_prepare_tx(local, sdata, prepare_tx_duration); 4179 4180 sdata_info(sdata, "send auth to %pM (try %d/%d)\n", 4181 auth_data->bss->bssid, auth_data->tries, 4182 IEEE80211_AUTH_MAX_TRIES); 4183 4184 auth_data->expected_transaction = 2; 4185 4186 if (auth_data->algorithm == WLAN_AUTH_SAE) { 4187 trans = auth_data->sae_trans; 4188 status = auth_data->sae_status; 4189 auth_data->expected_transaction = trans; 4190 } 4191 4192 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) 4193 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | 4194 IEEE80211_TX_INTFL_MLME_CONN_TX; 4195 4196 ieee80211_send_auth(sdata, trans, auth_data->algorithm, status, 4197 auth_data->data, auth_data->data_len, 4198 auth_data->bss->bssid, 4199 auth_data->bss->bssid, NULL, 0, 0, 4200 tx_flags); 4201 4202 if (tx_flags == 0) { 4203 if (auth_data->algorithm == WLAN_AUTH_SAE) 4204 auth_data->timeout = jiffies + 4205 IEEE80211_AUTH_TIMEOUT_SAE; 4206 else 4207 auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; 4208 } else { 4209 auth_data->timeout = 4210 round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG); 4211 } 4212 4213 auth_data->timeout_started = true; 4214 run_again(sdata, auth_data->timeout); 4215 4216 return 0; 4217 } 4218 4219 static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata) 4220 { 4221 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data; 4222 struct ieee80211_local *local = sdata->local; 4223 4224 sdata_assert_lock(sdata); 4225 4226 assoc_data->tries++; 4227 if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) { 4228 sdata_info(sdata, "association with %pM timed out\n", 4229 assoc_data->bss->bssid); 4230 4231 /* 4232 * Most likely AP is not in the range so remove the 4233 * bss struct for that AP. 4234 */ 4235 cfg80211_unlink_bss(local->hw.wiphy, assoc_data->bss); 4236 4237 return -ETIMEDOUT; 4238 } 4239 4240 sdata_info(sdata, "associate with %pM (try %d/%d)\n", 4241 assoc_data->bss->bssid, assoc_data->tries, 4242 IEEE80211_ASSOC_MAX_TRIES); 4243 ieee80211_send_assoc(sdata); 4244 4245 if (!ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) { 4246 assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT; 4247 assoc_data->timeout_started = true; 4248 run_again(sdata, assoc_data->timeout); 4249 } else { 4250 assoc_data->timeout = 4251 round_jiffies_up(jiffies + 4252 IEEE80211_ASSOC_TIMEOUT_LONG); 4253 assoc_data->timeout_started = true; 4254 run_again(sdata, assoc_data->timeout); 4255 } 4256 4257 return 0; 4258 } 4259 4260 void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata, 4261 __le16 fc, bool acked) 4262 { 4263 struct ieee80211_local *local = sdata->local; 4264 4265 sdata->u.mgd.status_fc = fc; 4266 sdata->u.mgd.status_acked = acked; 4267 sdata->u.mgd.status_received = true; 4268 4269 ieee80211_queue_work(&local->hw, &sdata->work); 4270 } 4271 4272 void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) 4273 { 4274 struct ieee80211_local *local = sdata->local; 4275 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 4276 4277 sdata_lock(sdata); 4278 4279 if (ifmgd->status_received) { 4280 __le16 fc = ifmgd->status_fc; 4281 bool status_acked = ifmgd->status_acked; 4282 4283 ifmgd->status_received = false; 4284 if (ifmgd->auth_data && ieee80211_is_auth(fc)) { 4285 if (status_acked) { 4286 if (ifmgd->auth_data->algorithm == 4287 WLAN_AUTH_SAE) 4288 ifmgd->auth_data->timeout = 4289 jiffies + 4290 IEEE80211_AUTH_TIMEOUT_SAE; 4291 else 4292 ifmgd->auth_data->timeout = 4293 jiffies + 4294 IEEE80211_AUTH_TIMEOUT_SHORT; 4295 run_again(sdata, ifmgd->auth_data->timeout); 4296 } else { 4297 ifmgd->auth_data->timeout = jiffies - 1; 4298 } 4299 ifmgd->auth_data->timeout_started = true; 4300 } else if (ifmgd->assoc_data && 4301 (ieee80211_is_assoc_req(fc) || 4302 ieee80211_is_reassoc_req(fc))) { 4303 if (status_acked) { 4304 ifmgd->assoc_data->timeout = 4305 jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT; 4306 run_again(sdata, ifmgd->assoc_data->timeout); 4307 } else { 4308 ifmgd->assoc_data->timeout = jiffies - 1; 4309 } 4310 ifmgd->assoc_data->timeout_started = true; 4311 } 4312 } 4313 4314 if (ifmgd->auth_data && ifmgd->auth_data->timeout_started && 4315 time_after(jiffies, ifmgd->auth_data->timeout)) { 4316 if (ifmgd->auth_data->done) { 4317 /* 4318 * ok ... we waited for assoc but userspace didn't, 4319 * so let's just kill the auth data 4320 */ 4321 ieee80211_destroy_auth_data(sdata, false); 4322 } else if (ieee80211_auth(sdata)) { 4323 u8 bssid[ETH_ALEN]; 4324 struct ieee80211_event event = { 4325 .type = MLME_EVENT, 4326 .u.mlme.data = AUTH_EVENT, 4327 .u.mlme.status = MLME_TIMEOUT, 4328 }; 4329 4330 memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN); 4331 4332 ieee80211_destroy_auth_data(sdata, false); 4333 4334 cfg80211_auth_timeout(sdata->dev, bssid); 4335 drv_event_callback(sdata->local, sdata, &event); 4336 } 4337 } else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started) 4338 run_again(sdata, ifmgd->auth_data->timeout); 4339 4340 if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started && 4341 time_after(jiffies, ifmgd->assoc_data->timeout)) { 4342 if ((ifmgd->assoc_data->need_beacon && !ifmgd->have_beacon) || 4343 ieee80211_do_assoc(sdata)) { 4344 struct cfg80211_bss *bss = ifmgd->assoc_data->bss; 4345 struct ieee80211_event event = { 4346 .type = MLME_EVENT, 4347 .u.mlme.data = ASSOC_EVENT, 4348 .u.mlme.status = MLME_TIMEOUT, 4349 }; 4350 4351 ieee80211_destroy_assoc_data(sdata, false, false); 4352 cfg80211_assoc_timeout(sdata->dev, bss); 4353 drv_event_callback(sdata->local, sdata, &event); 4354 } 4355 } else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started) 4356 run_again(sdata, ifmgd->assoc_data->timeout); 4357 4358 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL && 4359 ifmgd->associated) { 4360 u8 bssid[ETH_ALEN]; 4361 int max_tries; 4362 4363 memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN); 4364 4365 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) 4366 max_tries = max_nullfunc_tries; 4367 else 4368 max_tries = max_probe_tries; 4369 4370 /* ACK received for nullfunc probing frame */ 4371 if (!ifmgd->probe_send_count) 4372 ieee80211_reset_ap_probe(sdata); 4373 else if (ifmgd->nullfunc_failed) { 4374 if (ifmgd->probe_send_count < max_tries) { 4375 mlme_dbg(sdata, 4376 "No ack for nullfunc frame to AP %pM, try %d/%i\n", 4377 bssid, ifmgd->probe_send_count, 4378 max_tries); 4379 ieee80211_mgd_probe_ap_send(sdata); 4380 } else { 4381 mlme_dbg(sdata, 4382 "No ack for nullfunc frame to AP %pM, disconnecting.\n", 4383 bssid); 4384 ieee80211_sta_connection_lost(sdata, bssid, 4385 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, 4386 false); 4387 } 4388 } else if (time_is_after_jiffies(ifmgd->probe_timeout)) 4389 run_again(sdata, ifmgd->probe_timeout); 4390 else if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) { 4391 mlme_dbg(sdata, 4392 "Failed to send nullfunc to AP %pM after %dms, disconnecting\n", 4393 bssid, probe_wait_ms); 4394 ieee80211_sta_connection_lost(sdata, bssid, 4395 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false); 4396 } else if (ifmgd->probe_send_count < max_tries) { 4397 mlme_dbg(sdata, 4398 "No probe response from AP %pM after %dms, try %d/%i\n", 4399 bssid, probe_wait_ms, 4400 ifmgd->probe_send_count, max_tries); 4401 ieee80211_mgd_probe_ap_send(sdata); 4402 } else { 4403 /* 4404 * We actually lost the connection ... or did we? 4405 * Let's make sure! 4406 */ 4407 mlme_dbg(sdata, 4408 "No probe response from AP %pM after %dms, disconnecting.\n", 4409 bssid, probe_wait_ms); 4410 4411 ieee80211_sta_connection_lost(sdata, bssid, 4412 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false); 4413 } 4414 } 4415 4416 sdata_unlock(sdata); 4417 } 4418 4419 static void ieee80211_sta_bcn_mon_timer(struct timer_list *t) 4420 { 4421 struct ieee80211_sub_if_data *sdata = 4422 from_timer(sdata, t, u.mgd.bcn_mon_timer); 4423 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 4424 4425 if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn) 4426 return; 4427 4428 sdata->u.mgd.connection_loss = false; 4429 ieee80211_queue_work(&sdata->local->hw, 4430 &sdata->u.mgd.beacon_connection_loss_work); 4431 } 4432 4433 static void ieee80211_sta_conn_mon_timer(struct timer_list *t) 4434 { 4435 struct ieee80211_sub_if_data *sdata = 4436 from_timer(sdata, t, u.mgd.conn_mon_timer); 4437 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 4438 struct ieee80211_local *local = sdata->local; 4439 4440 if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn) 4441 return; 4442 4443 ieee80211_queue_work(&local->hw, &ifmgd->monitor_work); 4444 } 4445 4446 static void ieee80211_sta_monitor_work(struct work_struct *work) 4447 { 4448 struct ieee80211_sub_if_data *sdata = 4449 container_of(work, struct ieee80211_sub_if_data, 4450 u.mgd.monitor_work); 4451 4452 ieee80211_mgd_probe_ap(sdata, false); 4453 } 4454 4455 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata) 4456 { 4457 if (sdata->vif.type == NL80211_IFTYPE_STATION) { 4458 __ieee80211_stop_poll(sdata); 4459 4460 /* let's probe the connection once */ 4461 if (!ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) 4462 ieee80211_queue_work(&sdata->local->hw, 4463 &sdata->u.mgd.monitor_work); 4464 } 4465 } 4466 4467 #ifdef CONFIG_PM 4468 void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data *sdata) 4469 { 4470 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 4471 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; 4472 4473 sdata_lock(sdata); 4474 4475 if (ifmgd->auth_data || ifmgd->assoc_data) { 4476 const u8 *bssid = ifmgd->auth_data ? 4477 ifmgd->auth_data->bss->bssid : 4478 ifmgd->assoc_data->bss->bssid; 4479 4480 /* 4481 * If we are trying to authenticate / associate while suspending, 4482 * cfg80211 won't know and won't actually abort those attempts, 4483 * thus we need to do that ourselves. 4484 */ 4485 ieee80211_send_deauth_disassoc(sdata, bssid, 4486 IEEE80211_STYPE_DEAUTH, 4487 WLAN_REASON_DEAUTH_LEAVING, 4488 false, frame_buf); 4489 if (ifmgd->assoc_data) 4490 ieee80211_destroy_assoc_data(sdata, false, true); 4491 if (ifmgd->auth_data) 4492 ieee80211_destroy_auth_data(sdata, false); 4493 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf, 4494 IEEE80211_DEAUTH_FRAME_LEN); 4495 } 4496 4497 /* This is a bit of a hack - we should find a better and more generic 4498 * solution to this. Normally when suspending, cfg80211 will in fact 4499 * deauthenticate. However, it doesn't (and cannot) stop an ongoing 4500 * auth (not so important) or assoc (this is the problem) process. 4501 * 4502 * As a consequence, it can happen that we are in the process of both 4503 * associating and suspending, and receive an association response 4504 * after cfg80211 has checked if it needs to disconnect, but before 4505 * we actually set the flag to drop incoming frames. This will then 4506 * cause the workqueue flush to process the association response in 4507 * the suspend, resulting in a successful association just before it 4508 * tries to remove the interface from the driver, which now though 4509 * has a channel context assigned ... this results in issues. 4510 * 4511 * To work around this (for now) simply deauth here again if we're 4512 * now connected. 4513 */ 4514 if (ifmgd->associated && !sdata->local->wowlan) { 4515 u8 bssid[ETH_ALEN]; 4516 struct cfg80211_deauth_request req = { 4517 .reason_code = WLAN_REASON_DEAUTH_LEAVING, 4518 .bssid = bssid, 4519 }; 4520 4521 memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN); 4522 ieee80211_mgd_deauth(sdata, &req); 4523 } 4524 4525 sdata_unlock(sdata); 4526 } 4527 4528 void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata) 4529 { 4530 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 4531 4532 sdata_lock(sdata); 4533 if (!ifmgd->associated) { 4534 sdata_unlock(sdata); 4535 return; 4536 } 4537 4538 if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) { 4539 sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME; 4540 mlme_dbg(sdata, "driver requested disconnect after resume\n"); 4541 ieee80211_sta_connection_lost(sdata, 4542 ifmgd->associated->bssid, 4543 WLAN_REASON_UNSPECIFIED, 4544 true); 4545 sdata_unlock(sdata); 4546 return; 4547 } 4548 sdata_unlock(sdata); 4549 } 4550 #endif 4551 4552 /* interface setup */ 4553 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata) 4554 { 4555 struct ieee80211_if_managed *ifmgd; 4556 4557 ifmgd = &sdata->u.mgd; 4558 INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work); 4559 INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work); 4560 INIT_WORK(&ifmgd->beacon_connection_loss_work, 4561 ieee80211_beacon_connection_loss_work); 4562 INIT_WORK(&ifmgd->csa_connection_drop_work, 4563 ieee80211_csa_connection_drop_work); 4564 INIT_WORK(&ifmgd->request_smps_work, ieee80211_request_smps_mgd_work); 4565 INIT_DELAYED_WORK(&ifmgd->tdls_peer_del_work, 4566 ieee80211_tdls_peer_del_work); 4567 timer_setup(&ifmgd->timer, ieee80211_sta_timer, 0); 4568 timer_setup(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer, 0); 4569 timer_setup(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer, 0); 4570 timer_setup(&ifmgd->chswitch_timer, ieee80211_chswitch_timer, 0); 4571 INIT_DELAYED_WORK(&ifmgd->tx_tspec_wk, 4572 ieee80211_sta_handle_tspec_ac_params_wk); 4573 4574 ifmgd->flags = 0; 4575 ifmgd->powersave = sdata->wdev.ps; 4576 ifmgd->uapsd_queues = sdata->local->hw.uapsd_queues; 4577 ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len; 4578 ifmgd->p2p_noa_index = -1; 4579 4580 if (sdata->local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS) 4581 ifmgd->req_smps = IEEE80211_SMPS_AUTOMATIC; 4582 else 4583 ifmgd->req_smps = IEEE80211_SMPS_OFF; 4584 4585 /* Setup TDLS data */ 4586 spin_lock_init(&ifmgd->teardown_lock); 4587 ifmgd->teardown_skb = NULL; 4588 ifmgd->orig_teardown_skb = NULL; 4589 } 4590 4591 /* scan finished notification */ 4592 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local) 4593 { 4594 struct ieee80211_sub_if_data *sdata; 4595 4596 /* Restart STA timers */ 4597 rcu_read_lock(); 4598 list_for_each_entry_rcu(sdata, &local->interfaces, list) { 4599 if (ieee80211_sdata_running(sdata)) 4600 ieee80211_restart_sta_timer(sdata); 4601 } 4602 rcu_read_unlock(); 4603 } 4604 4605 static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata, 4606 struct cfg80211_bss *cbss) 4607 { 4608 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 4609 const u8 *ht_cap_ie, *vht_cap_ie; 4610 const struct ieee80211_ht_cap *ht_cap; 4611 const struct ieee80211_vht_cap *vht_cap; 4612 u8 chains = 1; 4613 4614 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT) 4615 return chains; 4616 4617 ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY); 4618 if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap)) { 4619 ht_cap = (void *)(ht_cap_ie + 2); 4620 chains = ieee80211_mcs_to_chains(&ht_cap->mcs); 4621 /* 4622 * TODO: use "Tx Maximum Number Spatial Streams Supported" and 4623 * "Tx Unequal Modulation Supported" fields. 4624 */ 4625 } 4626 4627 if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT) 4628 return chains; 4629 4630 vht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY); 4631 if (vht_cap_ie && vht_cap_ie[1] >= sizeof(*vht_cap)) { 4632 u8 nss; 4633 u16 tx_mcs_map; 4634 4635 vht_cap = (void *)(vht_cap_ie + 2); 4636 tx_mcs_map = le16_to_cpu(vht_cap->supp_mcs.tx_mcs_map); 4637 for (nss = 8; nss > 0; nss--) { 4638 if (((tx_mcs_map >> (2 * (nss - 1))) & 3) != 4639 IEEE80211_VHT_MCS_NOT_SUPPORTED) 4640 break; 4641 } 4642 /* TODO: use "Tx Highest Supported Long GI Data Rate" field? */ 4643 chains = max(chains, nss); 4644 } 4645 4646 return chains; 4647 } 4648 4649 static bool 4650 ieee80211_verify_sta_he_mcs_support(struct ieee80211_supported_band *sband, 4651 const struct ieee80211_he_operation *he_op) 4652 { 4653 const struct ieee80211_sta_he_cap *sta_he_cap = 4654 ieee80211_get_he_sta_cap(sband); 4655 u16 ap_min_req_set; 4656 int i; 4657 4658 if (!sta_he_cap || !he_op) 4659 return false; 4660 4661 ap_min_req_set = le16_to_cpu(he_op->he_mcs_nss_set); 4662 4663 /* Need to go over for 80MHz, 160MHz and for 80+80 */ 4664 for (i = 0; i < 3; i++) { 4665 const struct ieee80211_he_mcs_nss_supp *sta_mcs_nss_supp = 4666 &sta_he_cap->he_mcs_nss_supp; 4667 u16 sta_mcs_map_rx = 4668 le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i]); 4669 u16 sta_mcs_map_tx = 4670 le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i + 1]); 4671 u8 nss; 4672 bool verified = true; 4673 4674 /* 4675 * For each band there is a maximum of 8 spatial streams 4676 * possible. Each of the sta_mcs_map_* is a 16-bit struct built 4677 * of 2 bits per NSS (1-8), with the values defined in enum 4678 * ieee80211_he_mcs_support. Need to make sure STA TX and RX 4679 * capabilities aren't less than the AP's minimum requirements 4680 * for this HE BSS per SS. 4681 * It is enough to find one such band that meets the reqs. 4682 */ 4683 for (nss = 8; nss > 0; nss--) { 4684 u8 sta_rx_val = (sta_mcs_map_rx >> (2 * (nss - 1))) & 3; 4685 u8 sta_tx_val = (sta_mcs_map_tx >> (2 * (nss - 1))) & 3; 4686 u8 ap_val = (ap_min_req_set >> (2 * (nss - 1))) & 3; 4687 4688 if (ap_val == IEEE80211_HE_MCS_NOT_SUPPORTED) 4689 continue; 4690 4691 /* 4692 * Make sure the HE AP doesn't require MCSs that aren't 4693 * supported by the client 4694 */ 4695 if (sta_rx_val == IEEE80211_HE_MCS_NOT_SUPPORTED || 4696 sta_tx_val == IEEE80211_HE_MCS_NOT_SUPPORTED || 4697 (ap_val > sta_rx_val) || (ap_val > sta_tx_val)) { 4698 verified = false; 4699 break; 4700 } 4701 } 4702 4703 if (verified) 4704 return true; 4705 } 4706 4707 /* If here, STA doesn't meet AP's HE min requirements */ 4708 return false; 4709 } 4710 4711 static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, 4712 struct cfg80211_bss *cbss) 4713 { 4714 struct ieee80211_local *local = sdata->local; 4715 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 4716 const struct ieee80211_ht_cap *ht_cap = NULL; 4717 const struct ieee80211_ht_operation *ht_oper = NULL; 4718 const struct ieee80211_vht_operation *vht_oper = NULL; 4719 const struct ieee80211_he_operation *he_oper = NULL; 4720 struct ieee80211_supported_band *sband; 4721 struct cfg80211_chan_def chandef; 4722 int ret; 4723 u32 i; 4724 bool have_80mhz; 4725 4726 sband = local->hw.wiphy->bands[cbss->channel->band]; 4727 4728 ifmgd->flags &= ~(IEEE80211_STA_DISABLE_40MHZ | 4729 IEEE80211_STA_DISABLE_80P80MHZ | 4730 IEEE80211_STA_DISABLE_160MHZ); 4731 4732 rcu_read_lock(); 4733 4734 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && 4735 sband->ht_cap.ht_supported) { 4736 const u8 *ht_oper_ie, *ht_cap_ie; 4737 4738 ht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_OPERATION); 4739 if (ht_oper_ie && ht_oper_ie[1] >= sizeof(*ht_oper)) 4740 ht_oper = (void *)(ht_oper_ie + 2); 4741 4742 ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY); 4743 if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap)) 4744 ht_cap = (void *)(ht_cap_ie + 2); 4745 4746 if (!ht_cap) { 4747 ifmgd->flags |= IEEE80211_STA_DISABLE_HT; 4748 ht_oper = NULL; 4749 } 4750 } 4751 4752 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && 4753 sband->vht_cap.vht_supported) { 4754 const u8 *vht_oper_ie, *vht_cap; 4755 4756 vht_oper_ie = ieee80211_bss_get_ie(cbss, 4757 WLAN_EID_VHT_OPERATION); 4758 if (vht_oper_ie && vht_oper_ie[1] >= sizeof(*vht_oper)) 4759 vht_oper = (void *)(vht_oper_ie + 2); 4760 if (vht_oper && !ht_oper) { 4761 vht_oper = NULL; 4762 sdata_info(sdata, 4763 "AP advertised VHT without HT, disabling both\n"); 4764 ifmgd->flags |= IEEE80211_STA_DISABLE_HT; 4765 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; 4766 } 4767 4768 vht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY); 4769 if (!vht_cap || vht_cap[1] < sizeof(struct ieee80211_vht_cap)) { 4770 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; 4771 vht_oper = NULL; 4772 } 4773 } 4774 4775 if (!ieee80211_get_he_sta_cap(sband)) 4776 ifmgd->flags |= IEEE80211_STA_DISABLE_HE; 4777 4778 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE)) { 4779 const struct cfg80211_bss_ies *ies; 4780 const u8 *he_oper_ie; 4781 4782 ies = rcu_dereference(cbss->ies); 4783 he_oper_ie = cfg80211_find_ext_ie(WLAN_EID_EXT_HE_OPERATION, 4784 ies->data, ies->len); 4785 if (he_oper_ie && 4786 he_oper_ie[1] == ieee80211_he_oper_size(&he_oper_ie[3])) 4787 he_oper = (void *)(he_oper_ie + 3); 4788 else 4789 he_oper = NULL; 4790 4791 if (!ieee80211_verify_sta_he_mcs_support(sband, he_oper)) 4792 ifmgd->flags |= IEEE80211_STA_DISABLE_HE; 4793 } 4794 4795 /* Allow VHT if at least one channel on the sband supports 80 MHz */ 4796 have_80mhz = false; 4797 for (i = 0; i < sband->n_channels; i++) { 4798 if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED | 4799 IEEE80211_CHAN_NO_80MHZ)) 4800 continue; 4801 4802 have_80mhz = true; 4803 break; 4804 } 4805 4806 if (!have_80mhz) 4807 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; 4808 4809 ifmgd->flags |= ieee80211_determine_chantype(sdata, sband, 4810 cbss->channel, 4811 ht_oper, vht_oper, he_oper, 4812 &chandef, false); 4813 4814 sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss), 4815 local->rx_chains); 4816 4817 rcu_read_unlock(); 4818 4819 /* will change later if needed */ 4820 sdata->smps_mode = IEEE80211_SMPS_OFF; 4821 4822 mutex_lock(&local->mtx); 4823 /* 4824 * If this fails (possibly due to channel context sharing 4825 * on incompatible channels, e.g. 80+80 and 160 sharing the 4826 * same control channel) try to use a smaller bandwidth. 4827 */ 4828 ret = ieee80211_vif_use_channel(sdata, &chandef, 4829 IEEE80211_CHANCTX_SHARED); 4830 4831 /* don't downgrade for 5 and 10 MHz channels, though. */ 4832 if (chandef.width == NL80211_CHAN_WIDTH_5 || 4833 chandef.width == NL80211_CHAN_WIDTH_10) 4834 goto out; 4835 4836 while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) { 4837 ifmgd->flags |= ieee80211_chandef_downgrade(&chandef); 4838 ret = ieee80211_vif_use_channel(sdata, &chandef, 4839 IEEE80211_CHANCTX_SHARED); 4840 } 4841 out: 4842 mutex_unlock(&local->mtx); 4843 return ret; 4844 } 4845 4846 static bool ieee80211_get_dtim(const struct cfg80211_bss_ies *ies, 4847 u8 *dtim_count, u8 *dtim_period) 4848 { 4849 const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM, ies->data, ies->len); 4850 const u8 *idx_ie = cfg80211_find_ie(WLAN_EID_MULTI_BSSID_IDX, ies->data, 4851 ies->len); 4852 const struct ieee80211_tim_ie *tim = NULL; 4853 const struct ieee80211_bssid_index *idx; 4854 bool valid = tim_ie && tim_ie[1] >= 2; 4855 4856 if (valid) 4857 tim = (void *)(tim_ie + 2); 4858 4859 if (dtim_count) 4860 *dtim_count = valid ? tim->dtim_count : 0; 4861 4862 if (dtim_period) 4863 *dtim_period = valid ? tim->dtim_period : 0; 4864 4865 /* Check if value is overridden by non-transmitted profile */ 4866 if (!idx_ie || idx_ie[1] < 3) 4867 return valid; 4868 4869 idx = (void *)(idx_ie + 2); 4870 4871 if (dtim_count) 4872 *dtim_count = idx->dtim_count; 4873 4874 if (dtim_period) 4875 *dtim_period = idx->dtim_period; 4876 4877 return true; 4878 } 4879 4880 static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, 4881 struct cfg80211_bss *cbss, bool assoc, 4882 bool override) 4883 { 4884 struct ieee80211_local *local = sdata->local; 4885 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 4886 struct ieee80211_bss *bss = (void *)cbss->priv; 4887 struct sta_info *new_sta = NULL; 4888 struct ieee80211_supported_band *sband; 4889 bool have_sta = false; 4890 int err; 4891 4892 sband = local->hw.wiphy->bands[cbss->channel->band]; 4893 4894 if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data)) 4895 return -EINVAL; 4896 4897 /* If a reconfig is happening, bail out */ 4898 if (local->in_reconfig) 4899 return -EBUSY; 4900 4901 if (assoc) { 4902 rcu_read_lock(); 4903 have_sta = sta_info_get(sdata, cbss->bssid); 4904 rcu_read_unlock(); 4905 } 4906 4907 if (!have_sta) { 4908 new_sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL); 4909 if (!new_sta) 4910 return -ENOMEM; 4911 } 4912 4913 /* 4914 * Set up the information for the new channel before setting the 4915 * new channel. We can't - completely race-free - change the basic 4916 * rates bitmap and the channel (sband) that it refers to, but if 4917 * we set it up before we at least avoid calling into the driver's 4918 * bss_info_changed() method with invalid information (since we do 4919 * call that from changing the channel - only for IDLE and perhaps 4920 * some others, but ...). 4921 * 4922 * So to avoid that, just set up all the new information before the 4923 * channel, but tell the driver to apply it only afterwards, since 4924 * it might need the new channel for that. 4925 */ 4926 if (new_sta) { 4927 u32 rates = 0, basic_rates = 0; 4928 bool have_higher_than_11mbit; 4929 int min_rate = INT_MAX, min_rate_index = -1; 4930 const struct cfg80211_bss_ies *ies; 4931 int shift = ieee80211_vif_get_shift(&sdata->vif); 4932 4933 ieee80211_get_rates(sband, bss->supp_rates, 4934 bss->supp_rates_len, 4935 &rates, &basic_rates, 4936 &have_higher_than_11mbit, 4937 &min_rate, &min_rate_index, 4938 shift); 4939 4940 /* 4941 * This used to be a workaround for basic rates missing 4942 * in the association response frame. Now that we no 4943 * longer use the basic rates from there, it probably 4944 * doesn't happen any more, but keep the workaround so 4945 * in case some *other* APs are buggy in different ways 4946 * we can connect -- with a warning. 4947 */ 4948 if (!basic_rates && min_rate_index >= 0) { 4949 sdata_info(sdata, 4950 "No basic rates, using min rate instead\n"); 4951 basic_rates = BIT(min_rate_index); 4952 } 4953 4954 new_sta->sta.supp_rates[cbss->channel->band] = rates; 4955 sdata->vif.bss_conf.basic_rates = basic_rates; 4956 4957 /* cf. IEEE 802.11 9.2.12 */ 4958 if (cbss->channel->band == NL80211_BAND_2GHZ && 4959 have_higher_than_11mbit) 4960 sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE; 4961 else 4962 sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE; 4963 4964 memcpy(ifmgd->bssid, cbss->bssid, ETH_ALEN); 4965 4966 /* set timing information */ 4967 sdata->vif.bss_conf.beacon_int = cbss->beacon_interval; 4968 rcu_read_lock(); 4969 ies = rcu_dereference(cbss->beacon_ies); 4970 if (ies) { 4971 sdata->vif.bss_conf.sync_tsf = ies->tsf; 4972 sdata->vif.bss_conf.sync_device_ts = 4973 bss->device_ts_beacon; 4974 4975 ieee80211_get_dtim(ies, 4976 &sdata->vif.bss_conf.sync_dtim_count, 4977 NULL); 4978 } else if (!ieee80211_hw_check(&sdata->local->hw, 4979 TIMING_BEACON_ONLY)) { 4980 ies = rcu_dereference(cbss->proberesp_ies); 4981 /* must be non-NULL since beacon IEs were NULL */ 4982 sdata->vif.bss_conf.sync_tsf = ies->tsf; 4983 sdata->vif.bss_conf.sync_device_ts = 4984 bss->device_ts_presp; 4985 sdata->vif.bss_conf.sync_dtim_count = 0; 4986 } else { 4987 sdata->vif.bss_conf.sync_tsf = 0; 4988 sdata->vif.bss_conf.sync_device_ts = 0; 4989 sdata->vif.bss_conf.sync_dtim_count = 0; 4990 } 4991 rcu_read_unlock(); 4992 } 4993 4994 if (new_sta || override) { 4995 err = ieee80211_prep_channel(sdata, cbss); 4996 if (err) { 4997 if (new_sta) 4998 sta_info_free(local, new_sta); 4999 return -EINVAL; 5000 } 5001 } 5002 5003 if (new_sta) { 5004 /* 5005 * tell driver about BSSID, basic rates and timing 5006 * this was set up above, before setting the channel 5007 */ 5008 ieee80211_bss_info_change_notify(sdata, 5009 BSS_CHANGED_BSSID | BSS_CHANGED_BASIC_RATES | 5010 BSS_CHANGED_BEACON_INT); 5011 5012 if (assoc) 5013 sta_info_pre_move_state(new_sta, IEEE80211_STA_AUTH); 5014 5015 err = sta_info_insert(new_sta); 5016 new_sta = NULL; 5017 if (err) { 5018 sdata_info(sdata, 5019 "failed to insert STA entry for the AP (error %d)\n", 5020 err); 5021 return err; 5022 } 5023 } else 5024 WARN_ON_ONCE(!ether_addr_equal(ifmgd->bssid, cbss->bssid)); 5025 5026 /* Cancel scan to ensure that nothing interferes with connection */ 5027 if (local->scanning) 5028 ieee80211_scan_cancel(local); 5029 5030 return 0; 5031 } 5032 5033 /* config hooks */ 5034 int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata, 5035 struct cfg80211_auth_request *req) 5036 { 5037 struct ieee80211_local *local = sdata->local; 5038 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 5039 struct ieee80211_mgd_auth_data *auth_data; 5040 u16 auth_alg; 5041 int err; 5042 bool cont_auth; 5043 5044 /* prepare auth data structure */ 5045 5046 switch (req->auth_type) { 5047 case NL80211_AUTHTYPE_OPEN_SYSTEM: 5048 auth_alg = WLAN_AUTH_OPEN; 5049 break; 5050 case NL80211_AUTHTYPE_SHARED_KEY: 5051 if (IS_ERR(local->wep_tx_tfm)) 5052 return -EOPNOTSUPP; 5053 auth_alg = WLAN_AUTH_SHARED_KEY; 5054 break; 5055 case NL80211_AUTHTYPE_FT: 5056 auth_alg = WLAN_AUTH_FT; 5057 break; 5058 case NL80211_AUTHTYPE_NETWORK_EAP: 5059 auth_alg = WLAN_AUTH_LEAP; 5060 break; 5061 case NL80211_AUTHTYPE_SAE: 5062 auth_alg = WLAN_AUTH_SAE; 5063 break; 5064 case NL80211_AUTHTYPE_FILS_SK: 5065 auth_alg = WLAN_AUTH_FILS_SK; 5066 break; 5067 case NL80211_AUTHTYPE_FILS_SK_PFS: 5068 auth_alg = WLAN_AUTH_FILS_SK_PFS; 5069 break; 5070 case NL80211_AUTHTYPE_FILS_PK: 5071 auth_alg = WLAN_AUTH_FILS_PK; 5072 break; 5073 default: 5074 return -EOPNOTSUPP; 5075 } 5076 5077 if (ifmgd->assoc_data) 5078 return -EBUSY; 5079 5080 auth_data = kzalloc(sizeof(*auth_data) + req->auth_data_len + 5081 req->ie_len, GFP_KERNEL); 5082 if (!auth_data) 5083 return -ENOMEM; 5084 5085 auth_data->bss = req->bss; 5086 5087 if (req->auth_data_len >= 4) { 5088 if (req->auth_type == NL80211_AUTHTYPE_SAE) { 5089 __le16 *pos = (__le16 *) req->auth_data; 5090 5091 auth_data->sae_trans = le16_to_cpu(pos[0]); 5092 auth_data->sae_status = le16_to_cpu(pos[1]); 5093 } 5094 memcpy(auth_data->data, req->auth_data + 4, 5095 req->auth_data_len - 4); 5096 auth_data->data_len += req->auth_data_len - 4; 5097 } 5098 5099 /* Check if continuing authentication or trying to authenticate with the 5100 * same BSS that we were in the process of authenticating with and avoid 5101 * removal and re-addition of the STA entry in 5102 * ieee80211_prep_connection(). 5103 */ 5104 cont_auth = ifmgd->auth_data && req->bss == ifmgd->auth_data->bss; 5105 5106 if (req->ie && req->ie_len) { 5107 memcpy(&auth_data->data[auth_data->data_len], 5108 req->ie, req->ie_len); 5109 auth_data->data_len += req->ie_len; 5110 } 5111 5112 if (req->key && req->key_len) { 5113 auth_data->key_len = req->key_len; 5114 auth_data->key_idx = req->key_idx; 5115 memcpy(auth_data->key, req->key, req->key_len); 5116 } 5117 5118 auth_data->algorithm = auth_alg; 5119 5120 /* try to authenticate/probe */ 5121 5122 if (ifmgd->auth_data) { 5123 if (cont_auth && req->auth_type == NL80211_AUTHTYPE_SAE) { 5124 auth_data->peer_confirmed = 5125 ifmgd->auth_data->peer_confirmed; 5126 } 5127 ieee80211_destroy_auth_data(sdata, cont_auth); 5128 } 5129 5130 /* prep auth_data so we don't go into idle on disassoc */ 5131 ifmgd->auth_data = auth_data; 5132 5133 /* If this is continuation of an ongoing SAE authentication exchange 5134 * (i.e., request to send SAE Confirm) and the peer has already 5135 * confirmed, mark authentication completed since we are about to send 5136 * out SAE Confirm. 5137 */ 5138 if (cont_auth && req->auth_type == NL80211_AUTHTYPE_SAE && 5139 auth_data->peer_confirmed && auth_data->sae_trans == 2) 5140 ieee80211_mark_sta_auth(sdata, req->bss->bssid); 5141 5142 if (ifmgd->associated) { 5143 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; 5144 5145 sdata_info(sdata, 5146 "disconnect from AP %pM for new auth to %pM\n", 5147 ifmgd->associated->bssid, req->bss->bssid); 5148 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, 5149 WLAN_REASON_UNSPECIFIED, 5150 false, frame_buf); 5151 5152 ieee80211_report_disconnect(sdata, frame_buf, 5153 sizeof(frame_buf), true, 5154 WLAN_REASON_UNSPECIFIED); 5155 } 5156 5157 sdata_info(sdata, "authenticate with %pM\n", req->bss->bssid); 5158 5159 err = ieee80211_prep_connection(sdata, req->bss, cont_auth, false); 5160 if (err) 5161 goto err_clear; 5162 5163 err = ieee80211_auth(sdata); 5164 if (err) { 5165 sta_info_destroy_addr(sdata, req->bss->bssid); 5166 goto err_clear; 5167 } 5168 5169 /* hold our own reference */ 5170 cfg80211_ref_bss(local->hw.wiphy, auth_data->bss); 5171 return 0; 5172 5173 err_clear: 5174 eth_zero_addr(ifmgd->bssid); 5175 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID); 5176 ifmgd->auth_data = NULL; 5177 mutex_lock(&sdata->local->mtx); 5178 ieee80211_vif_release_channel(sdata); 5179 mutex_unlock(&sdata->local->mtx); 5180 kfree(auth_data); 5181 return err; 5182 } 5183 5184 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, 5185 struct cfg80211_assoc_request *req) 5186 { 5187 struct ieee80211_local *local = sdata->local; 5188 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 5189 struct ieee80211_bss *bss = (void *)req->bss->priv; 5190 struct ieee80211_mgd_assoc_data *assoc_data; 5191 const struct cfg80211_bss_ies *beacon_ies; 5192 struct ieee80211_supported_band *sband; 5193 const u8 *ssidie, *ht_ie, *vht_ie; 5194 int i, err; 5195 bool override = false; 5196 5197 assoc_data = kzalloc(sizeof(*assoc_data) + req->ie_len, GFP_KERNEL); 5198 if (!assoc_data) 5199 return -ENOMEM; 5200 5201 rcu_read_lock(); 5202 ssidie = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID); 5203 if (!ssidie) { 5204 rcu_read_unlock(); 5205 kfree(assoc_data); 5206 return -EINVAL; 5207 } 5208 memcpy(assoc_data->ssid, ssidie + 2, ssidie[1]); 5209 assoc_data->ssid_len = ssidie[1]; 5210 rcu_read_unlock(); 5211 5212 if (ifmgd->associated) { 5213 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; 5214 5215 sdata_info(sdata, 5216 "disconnect from AP %pM for new assoc to %pM\n", 5217 ifmgd->associated->bssid, req->bss->bssid); 5218 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, 5219 WLAN_REASON_UNSPECIFIED, 5220 false, frame_buf); 5221 5222 ieee80211_report_disconnect(sdata, frame_buf, 5223 sizeof(frame_buf), true, 5224 WLAN_REASON_UNSPECIFIED); 5225 } 5226 5227 if (ifmgd->auth_data && !ifmgd->auth_data->done) { 5228 err = -EBUSY; 5229 goto err_free; 5230 } 5231 5232 if (ifmgd->assoc_data) { 5233 err = -EBUSY; 5234 goto err_free; 5235 } 5236 5237 if (ifmgd->auth_data) { 5238 bool match; 5239 5240 /* keep sta info, bssid if matching */ 5241 match = ether_addr_equal(ifmgd->bssid, req->bss->bssid); 5242 ieee80211_destroy_auth_data(sdata, match); 5243 } 5244 5245 /* prepare assoc data */ 5246 5247 ifmgd->beacon_crc_valid = false; 5248 5249 assoc_data->wmm = bss->wmm_used && 5250 (local->hw.queues >= IEEE80211_NUM_ACS); 5251 5252 /* 5253 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode. 5254 * We still associate in non-HT mode (11a/b/g) if any one of these 5255 * ciphers is configured as pairwise. 5256 * We can set this to true for non-11n hardware, that'll be checked 5257 * separately along with the peer capabilities. 5258 */ 5259 for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) { 5260 if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 || 5261 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP || 5262 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) { 5263 ifmgd->flags |= IEEE80211_STA_DISABLE_HT; 5264 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; 5265 ifmgd->flags |= IEEE80211_STA_DISABLE_HE; 5266 netdev_info(sdata->dev, 5267 "disabling HE/HT/VHT due to WEP/TKIP use\n"); 5268 } 5269 } 5270 5271 /* Also disable HT if we don't support it or the AP doesn't use WMM */ 5272 sband = local->hw.wiphy->bands[req->bss->channel->band]; 5273 if (!sband->ht_cap.ht_supported || 5274 local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used || 5275 ifmgd->flags & IEEE80211_STA_DISABLE_WMM) { 5276 ifmgd->flags |= IEEE80211_STA_DISABLE_HT; 5277 if (!bss->wmm_used && 5278 !(ifmgd->flags & IEEE80211_STA_DISABLE_WMM)) 5279 netdev_info(sdata->dev, 5280 "disabling HT as WMM/QoS is not supported by the AP\n"); 5281 } 5282 5283 /* disable VHT if we don't support it or the AP doesn't use WMM */ 5284 if (!sband->vht_cap.vht_supported || 5285 local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used || 5286 ifmgd->flags & IEEE80211_STA_DISABLE_WMM) { 5287 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; 5288 if (!bss->wmm_used && 5289 !(ifmgd->flags & IEEE80211_STA_DISABLE_WMM)) 5290 netdev_info(sdata->dev, 5291 "disabling VHT as WMM/QoS is not supported by the AP\n"); 5292 } 5293 5294 memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa)); 5295 memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask, 5296 sizeof(ifmgd->ht_capa_mask)); 5297 5298 memcpy(&ifmgd->vht_capa, &req->vht_capa, sizeof(ifmgd->vht_capa)); 5299 memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask, 5300 sizeof(ifmgd->vht_capa_mask)); 5301 5302 if (req->ie && req->ie_len) { 5303 memcpy(assoc_data->ie, req->ie, req->ie_len); 5304 assoc_data->ie_len = req->ie_len; 5305 } 5306 5307 if (req->fils_kek) { 5308 /* should already be checked in cfg80211 - so warn */ 5309 if (WARN_ON(req->fils_kek_len > FILS_MAX_KEK_LEN)) { 5310 err = -EINVAL; 5311 goto err_free; 5312 } 5313 memcpy(assoc_data->fils_kek, req->fils_kek, 5314 req->fils_kek_len); 5315 assoc_data->fils_kek_len = req->fils_kek_len; 5316 } 5317 5318 if (req->fils_nonces) 5319 memcpy(assoc_data->fils_nonces, req->fils_nonces, 5320 2 * FILS_NONCE_LEN); 5321 5322 assoc_data->bss = req->bss; 5323 5324 if (ifmgd->req_smps == IEEE80211_SMPS_AUTOMATIC) { 5325 if (ifmgd->powersave) 5326 sdata->smps_mode = IEEE80211_SMPS_DYNAMIC; 5327 else 5328 sdata->smps_mode = IEEE80211_SMPS_OFF; 5329 } else 5330 sdata->smps_mode = ifmgd->req_smps; 5331 5332 assoc_data->capability = req->bss->capability; 5333 assoc_data->supp_rates = bss->supp_rates; 5334 assoc_data->supp_rates_len = bss->supp_rates_len; 5335 5336 rcu_read_lock(); 5337 ht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_HT_OPERATION); 5338 if (ht_ie && ht_ie[1] >= sizeof(struct ieee80211_ht_operation)) 5339 assoc_data->ap_ht_param = 5340 ((struct ieee80211_ht_operation *)(ht_ie + 2))->ht_param; 5341 else 5342 ifmgd->flags |= IEEE80211_STA_DISABLE_HT; 5343 vht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_VHT_CAPABILITY); 5344 if (vht_ie && vht_ie[1] >= sizeof(struct ieee80211_vht_cap)) 5345 memcpy(&assoc_data->ap_vht_cap, vht_ie + 2, 5346 sizeof(struct ieee80211_vht_cap)); 5347 else 5348 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; 5349 rcu_read_unlock(); 5350 5351 if (WARN((sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD) && 5352 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK), 5353 "U-APSD not supported with HW_PS_NULLFUNC_STACK\n")) 5354 sdata->vif.driver_flags &= ~IEEE80211_VIF_SUPPORTS_UAPSD; 5355 5356 if (bss->wmm_used && bss->uapsd_supported && 5357 (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD)) { 5358 assoc_data->uapsd = true; 5359 ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED; 5360 } else { 5361 assoc_data->uapsd = false; 5362 ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED; 5363 } 5364 5365 if (req->prev_bssid) 5366 memcpy(assoc_data->prev_bssid, req->prev_bssid, ETH_ALEN); 5367 5368 if (req->use_mfp) { 5369 ifmgd->mfp = IEEE80211_MFP_REQUIRED; 5370 ifmgd->flags |= IEEE80211_STA_MFP_ENABLED; 5371 } else { 5372 ifmgd->mfp = IEEE80211_MFP_DISABLED; 5373 ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED; 5374 } 5375 5376 if (req->flags & ASSOC_REQ_USE_RRM) 5377 ifmgd->flags |= IEEE80211_STA_ENABLE_RRM; 5378 else 5379 ifmgd->flags &= ~IEEE80211_STA_ENABLE_RRM; 5380 5381 if (req->crypto.control_port) 5382 ifmgd->flags |= IEEE80211_STA_CONTROL_PORT; 5383 else 5384 ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT; 5385 5386 sdata->control_port_protocol = req->crypto.control_port_ethertype; 5387 sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt; 5388 sdata->control_port_over_nl80211 = 5389 req->crypto.control_port_over_nl80211; 5390 sdata->encrypt_headroom = ieee80211_cs_headroom(local, &req->crypto, 5391 sdata->vif.type); 5392 5393 /* kick off associate process */ 5394 5395 ifmgd->assoc_data = assoc_data; 5396 ifmgd->dtim_period = 0; 5397 ifmgd->have_beacon = false; 5398 5399 /* override HT/VHT configuration only if the AP and we support it */ 5400 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) { 5401 struct ieee80211_sta_ht_cap sta_ht_cap; 5402 5403 if (req->flags & ASSOC_REQ_DISABLE_HT) 5404 override = true; 5405 5406 memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap)); 5407 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap); 5408 5409 /* check for 40 MHz disable override */ 5410 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ) && 5411 sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 && 5412 !(sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) 5413 override = true; 5414 5415 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && 5416 req->flags & ASSOC_REQ_DISABLE_VHT) 5417 override = true; 5418 } 5419 5420 if (req->flags & ASSOC_REQ_DISABLE_HT) { 5421 ifmgd->flags |= IEEE80211_STA_DISABLE_HT; 5422 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; 5423 } 5424 5425 if (req->flags & ASSOC_REQ_DISABLE_VHT) 5426 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; 5427 5428 err = ieee80211_prep_connection(sdata, req->bss, true, override); 5429 if (err) 5430 goto err_clear; 5431 5432 rcu_read_lock(); 5433 beacon_ies = rcu_dereference(req->bss->beacon_ies); 5434 5435 if (ieee80211_hw_check(&sdata->local->hw, NEED_DTIM_BEFORE_ASSOC) && 5436 !beacon_ies) { 5437 /* 5438 * Wait up to one beacon interval ... 5439 * should this be more if we miss one? 5440 */ 5441 sdata_info(sdata, "waiting for beacon from %pM\n", 5442 ifmgd->bssid); 5443 assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval); 5444 assoc_data->timeout_started = true; 5445 assoc_data->need_beacon = true; 5446 } else if (beacon_ies) { 5447 const u8 *ie; 5448 u8 dtim_count = 0; 5449 5450 ieee80211_get_dtim(beacon_ies, &dtim_count, 5451 &ifmgd->dtim_period); 5452 5453 ifmgd->have_beacon = true; 5454 assoc_data->timeout = jiffies; 5455 assoc_data->timeout_started = true; 5456 5457 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) { 5458 sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf; 5459 sdata->vif.bss_conf.sync_device_ts = 5460 bss->device_ts_beacon; 5461 sdata->vif.bss_conf.sync_dtim_count = dtim_count; 5462 } 5463 5464 ie = cfg80211_find_ext_ie(WLAN_EID_EXT_MULTIPLE_BSSID_CONFIGURATION, 5465 beacon_ies->data, beacon_ies->len); 5466 if (ie && ie[1] >= 3) 5467 sdata->vif.bss_conf.profile_periodicity = ie[4]; 5468 5469 ie = cfg80211_find_ie(WLAN_EID_EXT_CAPABILITY, 5470 beacon_ies->data, beacon_ies->len); 5471 if (ie && ie[1] >= 11 && 5472 (ie[10] & WLAN_EXT_CAPA11_EMA_SUPPORT)) 5473 sdata->vif.bss_conf.ema_ap = true; 5474 } else { 5475 assoc_data->timeout = jiffies; 5476 assoc_data->timeout_started = true; 5477 } 5478 rcu_read_unlock(); 5479 5480 run_again(sdata, assoc_data->timeout); 5481 5482 if (bss->corrupt_data) { 5483 char *corrupt_type = "data"; 5484 if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_BEACON) { 5485 if (bss->corrupt_data & 5486 IEEE80211_BSS_CORRUPT_PROBE_RESP) 5487 corrupt_type = "beacon and probe response"; 5488 else 5489 corrupt_type = "beacon"; 5490 } else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP) 5491 corrupt_type = "probe response"; 5492 sdata_info(sdata, "associating with AP with corrupt %s\n", 5493 corrupt_type); 5494 } 5495 5496 return 0; 5497 err_clear: 5498 eth_zero_addr(ifmgd->bssid); 5499 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID); 5500 ifmgd->assoc_data = NULL; 5501 err_free: 5502 kfree(assoc_data); 5503 return err; 5504 } 5505 5506 int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, 5507 struct cfg80211_deauth_request *req) 5508 { 5509 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 5510 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; 5511 bool tx = !req->local_state_change; 5512 5513 if (ifmgd->auth_data && 5514 ether_addr_equal(ifmgd->auth_data->bss->bssid, req->bssid)) { 5515 sdata_info(sdata, 5516 "aborting authentication with %pM by local choice (Reason: %u=%s)\n", 5517 req->bssid, req->reason_code, 5518 ieee80211_get_reason_code_string(req->reason_code)); 5519 5520 drv_mgd_prepare_tx(sdata->local, sdata, 0); 5521 ieee80211_send_deauth_disassoc(sdata, req->bssid, 5522 IEEE80211_STYPE_DEAUTH, 5523 req->reason_code, tx, 5524 frame_buf); 5525 ieee80211_destroy_auth_data(sdata, false); 5526 ieee80211_report_disconnect(sdata, frame_buf, 5527 sizeof(frame_buf), true, 5528 req->reason_code); 5529 5530 return 0; 5531 } 5532 5533 if (ifmgd->assoc_data && 5534 ether_addr_equal(ifmgd->assoc_data->bss->bssid, req->bssid)) { 5535 sdata_info(sdata, 5536 "aborting association with %pM by local choice (Reason: %u=%s)\n", 5537 req->bssid, req->reason_code, 5538 ieee80211_get_reason_code_string(req->reason_code)); 5539 5540 drv_mgd_prepare_tx(sdata->local, sdata, 0); 5541 ieee80211_send_deauth_disassoc(sdata, req->bssid, 5542 IEEE80211_STYPE_DEAUTH, 5543 req->reason_code, tx, 5544 frame_buf); 5545 ieee80211_destroy_assoc_data(sdata, false, true); 5546 ieee80211_report_disconnect(sdata, frame_buf, 5547 sizeof(frame_buf), true, 5548 req->reason_code); 5549 return 0; 5550 } 5551 5552 if (ifmgd->associated && 5553 ether_addr_equal(ifmgd->associated->bssid, req->bssid)) { 5554 sdata_info(sdata, 5555 "deauthenticating from %pM by local choice (Reason: %u=%s)\n", 5556 req->bssid, req->reason_code, 5557 ieee80211_get_reason_code_string(req->reason_code)); 5558 5559 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, 5560 req->reason_code, tx, frame_buf); 5561 ieee80211_report_disconnect(sdata, frame_buf, 5562 sizeof(frame_buf), true, 5563 req->reason_code); 5564 return 0; 5565 } 5566 5567 return -ENOTCONN; 5568 } 5569 5570 int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata, 5571 struct cfg80211_disassoc_request *req) 5572 { 5573 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 5574 u8 bssid[ETH_ALEN]; 5575 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; 5576 5577 /* 5578 * cfg80211 should catch this ... but it's racy since 5579 * we can receive a disassoc frame, process it, hand it 5580 * to cfg80211 while that's in a locked section already 5581 * trying to tell us that the user wants to disconnect. 5582 */ 5583 if (ifmgd->associated != req->bss) 5584 return -ENOLINK; 5585 5586 sdata_info(sdata, 5587 "disassociating from %pM by local choice (Reason: %u=%s)\n", 5588 req->bss->bssid, req->reason_code, ieee80211_get_reason_code_string(req->reason_code)); 5589 5590 memcpy(bssid, req->bss->bssid, ETH_ALEN); 5591 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC, 5592 req->reason_code, !req->local_state_change, 5593 frame_buf); 5594 5595 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true, 5596 req->reason_code); 5597 5598 return 0; 5599 } 5600 5601 void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata) 5602 { 5603 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 5604 5605 /* 5606 * Make sure some work items will not run after this, 5607 * they will not do anything but might not have been 5608 * cancelled when disconnecting. 5609 */ 5610 cancel_work_sync(&ifmgd->monitor_work); 5611 cancel_work_sync(&ifmgd->beacon_connection_loss_work); 5612 cancel_work_sync(&ifmgd->request_smps_work); 5613 cancel_work_sync(&ifmgd->csa_connection_drop_work); 5614 cancel_work_sync(&ifmgd->chswitch_work); 5615 cancel_delayed_work_sync(&ifmgd->tdls_peer_del_work); 5616 5617 sdata_lock(sdata); 5618 if (ifmgd->assoc_data) { 5619 struct cfg80211_bss *bss = ifmgd->assoc_data->bss; 5620 ieee80211_destroy_assoc_data(sdata, false, false); 5621 cfg80211_assoc_timeout(sdata->dev, bss); 5622 } 5623 if (ifmgd->auth_data) 5624 ieee80211_destroy_auth_data(sdata, false); 5625 spin_lock_bh(&ifmgd->teardown_lock); 5626 if (ifmgd->teardown_skb) { 5627 kfree_skb(ifmgd->teardown_skb); 5628 ifmgd->teardown_skb = NULL; 5629 ifmgd->orig_teardown_skb = NULL; 5630 } 5631 kfree(ifmgd->assoc_req_ies); 5632 ifmgd->assoc_req_ies = NULL; 5633 ifmgd->assoc_req_ies_len = 0; 5634 spin_unlock_bh(&ifmgd->teardown_lock); 5635 del_timer_sync(&ifmgd->timer); 5636 sdata_unlock(sdata); 5637 } 5638 5639 void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif, 5640 enum nl80211_cqm_rssi_threshold_event rssi_event, 5641 s32 rssi_level, 5642 gfp_t gfp) 5643 { 5644 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); 5645 5646 trace_api_cqm_rssi_notify(sdata, rssi_event, rssi_level); 5647 5648 cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, rssi_level, gfp); 5649 } 5650 EXPORT_SYMBOL(ieee80211_cqm_rssi_notify); 5651 5652 void ieee80211_cqm_beacon_loss_notify(struct ieee80211_vif *vif, gfp_t gfp) 5653 { 5654 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); 5655 5656 trace_api_cqm_beacon_loss_notify(sdata->local, sdata); 5657 5658 cfg80211_cqm_beacon_loss_notify(sdata->dev, gfp); 5659 } 5660 EXPORT_SYMBOL(ieee80211_cqm_beacon_loss_notify); 5661