1# 2# Network configuration 3# 4 5menuconfig NET 6 bool "Networking support" 7 select NLATTR 8 select GENERIC_NET_UTILS 9 select BPF 10 ---help--- 11 Unless you really know what you are doing, you should say Y here. 12 The reason is that some programs need kernel networking support even 13 when running on a stand-alone machine that isn't connected to any 14 other computer. 15 16 If you are upgrading from an older kernel, you 17 should consider updating your networking tools too because changes 18 in the kernel and the tools often go hand in hand. The tools are 19 contained in the package net-tools, the location and version number 20 of which are given in <file:Documentation/Changes>. 21 22 For a general introduction to Linux networking, it is highly 23 recommended to read the NET-HOWTO, available from 24 <http://www.tldp.org/docs.html#howto>. 25 26if NET 27 28config WANT_COMPAT_NETLINK_MESSAGES 29 bool 30 help 31 This option can be selected by other options that need compat 32 netlink messages. 33 34config COMPAT_NETLINK_MESSAGES 35 def_bool y 36 depends on COMPAT 37 depends on WEXT_CORE || WANT_COMPAT_NETLINK_MESSAGES 38 help 39 This option makes it possible to send different netlink messages 40 to tasks depending on whether the task is a compat task or not. To 41 achieve this, you need to set skb_shinfo(skb)->frag_list to the 42 compat skb before sending the skb, the netlink code will sort out 43 which message to actually pass to the task. 44 45 Newly written code should NEVER need this option but do 46 compat-independent messages instead! 47 48config NET_INGRESS 49 bool 50 51config NET_EGRESS 52 bool 53 54menu "Networking options" 55 56source "net/packet/Kconfig" 57source "net/unix/Kconfig" 58source "net/tls/Kconfig" 59source "net/xfrm/Kconfig" 60source "net/iucv/Kconfig" 61source "net/smc/Kconfig" 62 63config INET 64 bool "TCP/IP networking" 65 select CRYPTO 66 select CRYPTO_AES 67 ---help--- 68 These are the protocols used on the Internet and on most local 69 Ethernets. It is highly recommended to say Y here (this will enlarge 70 your kernel by about 400 KB), since some programs (e.g. the X window 71 system) use TCP/IP even if your machine is not connected to any 72 other computer. You will get the so-called loopback device which 73 allows you to ping yourself (great fun, that!). 74 75 For an excellent introduction to Linux networking, please read the 76 Linux Networking HOWTO, available from 77 <http://www.tldp.org/docs.html#howto>. 78 79 If you say Y here and also to "/proc file system support" and 80 "Sysctl support" below, you can change various aspects of the 81 behavior of the TCP/IP code by writing to the (virtual) files in 82 /proc/sys/net/ipv4/*; the options are explained in the file 83 <file:Documentation/networking/ip-sysctl.txt>. 84 85 Short answer: say Y. 86 87if INET 88source "net/ipv4/Kconfig" 89source "net/ipv6/Kconfig" 90source "net/netlabel/Kconfig" 91 92endif # if INET 93 94config NETWORK_SECMARK 95 bool "Security Marking" 96 help 97 This enables security marking of network packets, similar 98 to nfmark, but designated for security purposes. 99 If you are unsure how to answer this question, answer N. 100 101config NET_PTP_CLASSIFY 102 def_bool n 103 104config NETWORK_PHY_TIMESTAMPING 105 bool "Timestamping in PHY devices" 106 select NET_PTP_CLASSIFY 107 help 108 This allows timestamping of network packets by PHYs with 109 hardware timestamping capabilities. This option adds some 110 overhead in the transmit and receive paths. 111 112 If you are unsure how to answer this question, answer N. 113 114menuconfig NETFILTER 115 bool "Network packet filtering framework (Netfilter)" 116 ---help--- 117 Netfilter is a framework for filtering and mangling network packets 118 that pass through your Linux box. 119 120 The most common use of packet filtering is to run your Linux box as 121 a firewall protecting a local network from the Internet. The type of 122 firewall provided by this kernel support is called a "packet 123 filter", which means that it can reject individual network packets 124 based on type, source, destination etc. The other kind of firewall, 125 a "proxy-based" one, is more secure but more intrusive and more 126 bothersome to set up; it inspects the network traffic much more 127 closely, modifies it and has knowledge about the higher level 128 protocols, which a packet filter lacks. Moreover, proxy-based 129 firewalls often require changes to the programs running on the local 130 clients. Proxy-based firewalls don't need support by the kernel, but 131 they are often combined with a packet filter, which only works if 132 you say Y here. 133 134 You should also say Y here if you intend to use your Linux box as 135 the gateway to the Internet for a local network of machines without 136 globally valid IP addresses. This is called "masquerading": if one 137 of the computers on your local network wants to send something to 138 the outside, your box can "masquerade" as that computer, i.e. it 139 forwards the traffic to the intended outside destination, but 140 modifies the packets to make it look like they came from the 141 firewall box itself. It works both ways: if the outside host 142 replies, the Linux box will silently forward the traffic to the 143 correct local computer. This way, the computers on your local net 144 are completely invisible to the outside world, even though they can 145 reach the outside and can receive replies. It is even possible to 146 run globally visible servers from within a masqueraded local network 147 using a mechanism called portforwarding. Masquerading is also often 148 called NAT (Network Address Translation). 149 150 Another use of Netfilter is in transparent proxying: if a machine on 151 the local network tries to connect to an outside host, your Linux 152 box can transparently forward the traffic to a local server, 153 typically a caching proxy server. 154 155 Yet another use of Netfilter is building a bridging firewall. Using 156 a bridge with Network packet filtering enabled makes iptables "see" 157 the bridged traffic. For filtering on the lower network and Ethernet 158 protocols over the bridge, use ebtables (under bridge netfilter 159 configuration). 160 161 Various modules exist for netfilter which replace the previous 162 masquerading (ipmasqadm), packet filtering (ipchains), transparent 163 proxying, and portforwarding mechanisms. Please see 164 <file:Documentation/Changes> under "iptables" for the location of 165 these packages. 166 167if NETFILTER 168 169config NETFILTER_DEBUG 170 bool "Network packet filtering debugging" 171 depends on NETFILTER 172 help 173 You can say Y here if you want to get additional messages useful in 174 debugging the netfilter code. 175 176config NETFILTER_ADVANCED 177 bool "Advanced netfilter configuration" 178 depends on NETFILTER 179 default y 180 help 181 If you say Y here you can select between all the netfilter modules. 182 If you say N the more unusual ones will not be shown and the 183 basic ones needed by most people will default to 'M'. 184 185 If unsure, say Y. 186 187config BRIDGE_NETFILTER 188 tristate "Bridged IP/ARP packets filtering" 189 depends on BRIDGE 190 depends on NETFILTER && INET 191 depends on NETFILTER_ADVANCED 192 default m 193 ---help--- 194 Enabling this option will let arptables resp. iptables see bridged 195 ARP resp. IP traffic. If you want a bridging firewall, you probably 196 want this option enabled. 197 Enabling or disabling this option doesn't enable or disable 198 ebtables. 199 200 If unsure, say N. 201 202source "net/netfilter/Kconfig" 203source "net/ipv4/netfilter/Kconfig" 204source "net/ipv6/netfilter/Kconfig" 205source "net/decnet/netfilter/Kconfig" 206source "net/bridge/netfilter/Kconfig" 207 208endif 209 210source "net/dccp/Kconfig" 211source "net/sctp/Kconfig" 212source "net/rds/Kconfig" 213source "net/tipc/Kconfig" 214source "net/atm/Kconfig" 215source "net/l2tp/Kconfig" 216source "net/802/Kconfig" 217source "net/bridge/Kconfig" 218source "net/dsa/Kconfig" 219source "net/8021q/Kconfig" 220source "net/decnet/Kconfig" 221source "net/llc/Kconfig" 222source "net/ipx/Kconfig" 223source "drivers/net/appletalk/Kconfig" 224source "net/x25/Kconfig" 225source "net/lapb/Kconfig" 226source "net/phonet/Kconfig" 227source "net/6lowpan/Kconfig" 228source "net/ieee802154/Kconfig" 229source "net/mac802154/Kconfig" 230source "net/sched/Kconfig" 231source "net/dcb/Kconfig" 232source "net/dns_resolver/Kconfig" 233source "net/batman-adv/Kconfig" 234source "net/openvswitch/Kconfig" 235source "net/vmw_vsock/Kconfig" 236source "net/netlink/Kconfig" 237source "net/mpls/Kconfig" 238source "net/nsh/Kconfig" 239source "net/hsr/Kconfig" 240source "net/switchdev/Kconfig" 241source "net/l3mdev/Kconfig" 242source "net/qrtr/Kconfig" 243source "net/ncsi/Kconfig" 244 245config RPS 246 bool 247 depends on SMP && SYSFS 248 default y 249 250config RFS_ACCEL 251 bool 252 depends on RPS 253 select CPU_RMAP 254 default y 255 256config XPS 257 bool 258 depends on SMP 259 default y 260 261config HWBM 262 bool 263 264config CGROUP_NET_PRIO 265 bool "Network priority cgroup" 266 depends on CGROUPS 267 select SOCK_CGROUP_DATA 268 ---help--- 269 Cgroup subsystem for use in assigning processes to network priorities on 270 a per-interface basis. 271 272config CGROUP_NET_CLASSID 273 bool "Network classid cgroup" 274 depends on CGROUPS 275 select SOCK_CGROUP_DATA 276 ---help--- 277 Cgroup subsystem for use as general purpose socket classid marker that is 278 being used in cls_cgroup and for netfilter matching. 279 280config NET_RX_BUSY_POLL 281 bool 282 default y 283 284config BQL 285 bool 286 depends on SYSFS 287 select DQL 288 default y 289 290config BPF_JIT 291 bool "enable BPF Just In Time compiler" 292 depends on HAVE_CBPF_JIT || HAVE_EBPF_JIT 293 depends on MODULES 294 ---help--- 295 Berkeley Packet Filter filtering capabilities are normally handled 296 by an interpreter. This option allows kernel to generate a native 297 code when filter is loaded in memory. This should speedup 298 packet sniffing (libpcap/tcpdump). 299 300 Note, admin should enable this feature changing: 301 /proc/sys/net/core/bpf_jit_enable 302 /proc/sys/net/core/bpf_jit_harden (optional) 303 /proc/sys/net/core/bpf_jit_kallsyms (optional) 304 305config BPF_STREAM_PARSER 306 bool "enable BPF STREAM_PARSER" 307 depends on BPF_SYSCALL 308 select STREAM_PARSER 309 ---help--- 310 Enabling this allows a stream parser to be used with 311 BPF_MAP_TYPE_SOCKMAP. 312 313 BPF_MAP_TYPE_SOCKMAP provides a map type to use with network sockets. 314 It can be used to enforce socket policy, implement socket redirects, 315 etc. 316 317config NET_FLOW_LIMIT 318 bool 319 depends on RPS 320 default y 321 ---help--- 322 The network stack has to drop packets when a receive processing CPU's 323 backlog reaches netdev_max_backlog. If a few out of many active flows 324 generate the vast majority of load, drop their traffic earlier to 325 maintain capacity for the other flows. This feature provides servers 326 with many clients some protection against DoS by a single (spoofed) 327 flow that greatly exceeds average workload. 328 329menu "Network testing" 330 331config NET_PKTGEN 332 tristate "Packet Generator (USE WITH CAUTION)" 333 depends on INET && PROC_FS 334 ---help--- 335 This module will inject preconfigured packets, at a configurable 336 rate, out of a given interface. It is used for network interface 337 stress testing and performance analysis. If you don't understand 338 what was just said, you don't need it: say N. 339 340 Documentation on how to use the packet generator can be found 341 at <file:Documentation/networking/pktgen.txt>. 342 343 To compile this code as a module, choose M here: the 344 module will be called pktgen. 345 346config NET_TCPPROBE 347 tristate "TCP connection probing" 348 depends on INET && PROC_FS && KPROBES 349 ---help--- 350 This module allows for capturing the changes to TCP connection 351 state in response to incoming packets. It is used for debugging 352 TCP congestion avoidance modules. If you don't understand 353 what was just said, you don't need it: say N. 354 355 Documentation on how to use TCP connection probing can be found 356 at: 357 358 http://www.linuxfoundation.org/collaborate/workgroups/networking/tcpprobe 359 360 To compile this code as a module, choose M here: the 361 module will be called tcp_probe. 362 363config NET_DROP_MONITOR 364 tristate "Network packet drop alerting service" 365 depends on INET && TRACEPOINTS 366 ---help--- 367 This feature provides an alerting service to userspace in the 368 event that packets are discarded in the network stack. Alerts 369 are broadcast via netlink socket to any listening user space 370 process. If you don't need network drop alerts, or if you are ok 371 just checking the various proc files and other utilities for 372 drop statistics, say N here. 373 374endmenu 375 376endmenu 377 378source "net/ax25/Kconfig" 379source "net/can/Kconfig" 380source "net/bluetooth/Kconfig" 381source "net/rxrpc/Kconfig" 382source "net/kcm/Kconfig" 383source "net/strparser/Kconfig" 384 385config FIB_RULES 386 bool 387 388menuconfig WIRELESS 389 bool "Wireless" 390 depends on !S390 391 default y 392 393if WIRELESS 394 395source "net/wireless/Kconfig" 396source "net/mac80211/Kconfig" 397 398endif # WIRELESS 399 400source "net/wimax/Kconfig" 401 402source "net/rfkill/Kconfig" 403source "net/9p/Kconfig" 404source "net/caif/Kconfig" 405source "net/ceph/Kconfig" 406source "net/nfc/Kconfig" 407source "net/psample/Kconfig" 408source "net/ife/Kconfig" 409 410config LWTUNNEL 411 bool "Network light weight tunnels" 412 ---help--- 413 This feature provides an infrastructure to support light weight 414 tunnels like mpls. There is no netdevice associated with a light 415 weight tunnel endpoint. Tunnel encapsulation parameters are stored 416 with light weight tunnel state associated with fib routes. 417 418config LWTUNNEL_BPF 419 bool "Execute BPF program as route nexthop action" 420 depends on LWTUNNEL 421 default y if LWTUNNEL=y 422 ---help--- 423 Allows to run BPF programs as a nexthop action following a route 424 lookup for incoming and outgoing packets. 425 426config DST_CACHE 427 bool 428 default n 429 430config GRO_CELLS 431 bool 432 default n 433 434config NET_DEVLINK 435 tristate "Network physical/parent device Netlink interface" 436 help 437 Network physical/parent device Netlink interface provides 438 infrastructure to support access to physical chip-wide config and 439 monitoring. 440 441config MAY_USE_DEVLINK 442 tristate 443 default m if NET_DEVLINK=m 444 default y if NET_DEVLINK=y || NET_DEVLINK=n 445 help 446 Drivers using the devlink infrastructure should have a dependency 447 on MAY_USE_DEVLINK to ensure they do not cause link errors when 448 devlink is a loadable module and the driver using it is built-in. 449 450endif # if NET 451 452# Used by archs to tell that they support BPF JIT compiler plus which flavour. 453# Only one of the two can be selected for a specific arch since eBPF JIT supersedes 454# the cBPF JIT. 455 456# Classic BPF JIT (cBPF) 457config HAVE_CBPF_JIT 458 bool 459 460# Extended BPF JIT (eBPF) 461config HAVE_EBPF_JIT 462 bool 463