1# 2# Network configuration 3# 4 5menuconfig NET 6 bool "Networking support" 7 select NLATTR 8 ---help--- 9 Unless you really know what you are doing, you should say Y here. 10 The reason is that some programs need kernel networking support even 11 when running on a stand-alone machine that isn't connected to any 12 other computer. 13 14 If you are upgrading from an older kernel, you 15 should consider updating your networking tools too because changes 16 in the kernel and the tools often go hand in hand. The tools are 17 contained in the package net-tools, the location and version number 18 of which are given in <file:Documentation/Changes>. 19 20 For a general introduction to Linux networking, it is highly 21 recommended to read the NET-HOWTO, available from 22 <http://www.tldp.org/docs.html#howto>. 23 24if NET 25 26config WANT_COMPAT_NETLINK_MESSAGES 27 bool 28 help 29 This option can be selected by other options that need compat 30 netlink messages. 31 32config COMPAT_NETLINK_MESSAGES 33 def_bool y 34 depends on COMPAT 35 depends on WEXT_CORE || WANT_COMPAT_NETLINK_MESSAGES 36 help 37 This option makes it possible to send different netlink messages 38 to tasks depending on whether the task is a compat task or not. To 39 achieve this, you need to set skb_shinfo(skb)->frag_list to the 40 compat skb before sending the skb, the netlink code will sort out 41 which message to actually pass to the task. 42 43 Newly written code should NEVER need this option but do 44 compat-independent messages instead! 45 46menu "Networking options" 47 48source "net/packet/Kconfig" 49source "net/unix/Kconfig" 50source "net/xfrm/Kconfig" 51source "net/iucv/Kconfig" 52 53config INET 54 bool "TCP/IP networking" 55 select CRYPTO 56 select CRYPTO_AES 57 ---help--- 58 These are the protocols used on the Internet and on most local 59 Ethernets. It is highly recommended to say Y here (this will enlarge 60 your kernel by about 400 KB), since some programs (e.g. the X window 61 system) use TCP/IP even if your machine is not connected to any 62 other computer. You will get the so-called loopback device which 63 allows you to ping yourself (great fun, that!). 64 65 For an excellent introduction to Linux networking, please read the 66 Linux Networking HOWTO, available from 67 <http://www.tldp.org/docs.html#howto>. 68 69 If you say Y here and also to "/proc file system support" and 70 "Sysctl support" below, you can change various aspects of the 71 behavior of the TCP/IP code by writing to the (virtual) files in 72 /proc/sys/net/ipv4/*; the options are explained in the file 73 <file:Documentation/networking/ip-sysctl.txt>. 74 75 Short answer: say Y. 76 77if INET 78source "net/ipv4/Kconfig" 79source "net/ipv6/Kconfig" 80source "net/netlabel/Kconfig" 81 82endif # if INET 83 84config NETWORK_SECMARK 85 bool "Security Marking" 86 help 87 This enables security marking of network packets, similar 88 to nfmark, but designated for security purposes. 89 If you are unsure how to answer this question, answer N. 90 91config NETWORK_PHY_TIMESTAMPING 92 bool "Timestamping in PHY devices" 93 help 94 This allows timestamping of network packets by PHYs with 95 hardware timestamping capabilities. This option adds some 96 overhead in the transmit and receive paths. 97 98 If you are unsure how to answer this question, answer N. 99 100menuconfig NETFILTER 101 bool "Network packet filtering framework (Netfilter)" 102 ---help--- 103 Netfilter is a framework for filtering and mangling network packets 104 that pass through your Linux box. 105 106 The most common use of packet filtering is to run your Linux box as 107 a firewall protecting a local network from the Internet. The type of 108 firewall provided by this kernel support is called a "packet 109 filter", which means that it can reject individual network packets 110 based on type, source, destination etc. The other kind of firewall, 111 a "proxy-based" one, is more secure but more intrusive and more 112 bothersome to set up; it inspects the network traffic much more 113 closely, modifies it and has knowledge about the higher level 114 protocols, which a packet filter lacks. Moreover, proxy-based 115 firewalls often require changes to the programs running on the local 116 clients. Proxy-based firewalls don't need support by the kernel, but 117 they are often combined with a packet filter, which only works if 118 you say Y here. 119 120 You should also say Y here if you intend to use your Linux box as 121 the gateway to the Internet for a local network of machines without 122 globally valid IP addresses. This is called "masquerading": if one 123 of the computers on your local network wants to send something to 124 the outside, your box can "masquerade" as that computer, i.e. it 125 forwards the traffic to the intended outside destination, but 126 modifies the packets to make it look like they came from the 127 firewall box itself. It works both ways: if the outside host 128 replies, the Linux box will silently forward the traffic to the 129 correct local computer. This way, the computers on your local net 130 are completely invisible to the outside world, even though they can 131 reach the outside and can receive replies. It is even possible to 132 run globally visible servers from within a masqueraded local network 133 using a mechanism called portforwarding. Masquerading is also often 134 called NAT (Network Address Translation). 135 136 Another use of Netfilter is in transparent proxying: if a machine on 137 the local network tries to connect to an outside host, your Linux 138 box can transparently forward the traffic to a local server, 139 typically a caching proxy server. 140 141 Yet another use of Netfilter is building a bridging firewall. Using 142 a bridge with Network packet filtering enabled makes iptables "see" 143 the bridged traffic. For filtering on the lower network and Ethernet 144 protocols over the bridge, use ebtables (under bridge netfilter 145 configuration). 146 147 Various modules exist for netfilter which replace the previous 148 masquerading (ipmasqadm), packet filtering (ipchains), transparent 149 proxying, and portforwarding mechanisms. Please see 150 <file:Documentation/Changes> under "iptables" for the location of 151 these packages. 152 153if NETFILTER 154 155config NETFILTER_DEBUG 156 bool "Network packet filtering debugging" 157 depends on NETFILTER 158 help 159 You can say Y here if you want to get additional messages useful in 160 debugging the netfilter code. 161 162config NETFILTER_ADVANCED 163 bool "Advanced netfilter configuration" 164 depends on NETFILTER 165 default y 166 help 167 If you say Y here you can select between all the netfilter modules. 168 If you say N the more unusual ones will not be shown and the 169 basic ones needed by most people will default to 'M'. 170 171 If unsure, say Y. 172 173config BRIDGE_NETFILTER 174 bool "Bridged IP/ARP packets filtering" 175 depends on BRIDGE && NETFILTER && INET 176 depends on NETFILTER_ADVANCED 177 default y 178 ---help--- 179 Enabling this option will let arptables resp. iptables see bridged 180 ARP resp. IP traffic. If you want a bridging firewall, you probably 181 want this option enabled. 182 Enabling or disabling this option doesn't enable or disable 183 ebtables. 184 185 If unsure, say N. 186 187source "net/netfilter/Kconfig" 188source "net/ipv4/netfilter/Kconfig" 189source "net/ipv6/netfilter/Kconfig" 190source "net/decnet/netfilter/Kconfig" 191source "net/bridge/netfilter/Kconfig" 192 193endif 194 195source "net/dccp/Kconfig" 196source "net/sctp/Kconfig" 197source "net/rds/Kconfig" 198source "net/tipc/Kconfig" 199source "net/atm/Kconfig" 200source "net/l2tp/Kconfig" 201source "net/802/Kconfig" 202source "net/bridge/Kconfig" 203source "net/dsa/Kconfig" 204source "net/8021q/Kconfig" 205source "net/decnet/Kconfig" 206source "net/llc/Kconfig" 207source "net/ipx/Kconfig" 208source "drivers/net/appletalk/Kconfig" 209source "net/x25/Kconfig" 210source "net/lapb/Kconfig" 211source "net/phonet/Kconfig" 212source "net/ieee802154/Kconfig" 213source "net/mac802154/Kconfig" 214source "net/sched/Kconfig" 215source "net/dcb/Kconfig" 216source "net/dns_resolver/Kconfig" 217source "net/batman-adv/Kconfig" 218source "net/openvswitch/Kconfig" 219source "net/vmw_vsock/Kconfig" 220 221config RPS 222 boolean 223 depends on SMP && SYSFS && USE_GENERIC_SMP_HELPERS 224 default y 225 226config RFS_ACCEL 227 boolean 228 depends on RPS && GENERIC_HARDIRQS 229 select CPU_RMAP 230 default y 231 232config XPS 233 boolean 234 depends on SMP && USE_GENERIC_SMP_HELPERS 235 default y 236 237config NETPRIO_CGROUP 238 tristate "Network priority cgroup" 239 depends on CGROUPS 240 ---help--- 241 Cgroup subsystem for use in assigning processes to network priorities on 242 a per-interface basis 243 244config BQL 245 boolean 246 depends on SYSFS 247 select DQL 248 default y 249 250config BPF_JIT 251 bool "enable BPF Just In Time compiler" 252 depends on HAVE_BPF_JIT 253 depends on MODULES 254 ---help--- 255 Berkeley Packet Filter filtering capabilities are normally handled 256 by an interpreter. This option allows kernel to generate a native 257 code when filter is loaded in memory. This should speedup 258 packet sniffing (libpcap/tcpdump). Note : Admin should enable 259 this feature changing /proc/sys/net/core/bpf_jit_enable 260 261menu "Network testing" 262 263config NET_PKTGEN 264 tristate "Packet Generator (USE WITH CAUTION)" 265 depends on PROC_FS 266 ---help--- 267 This module will inject preconfigured packets, at a configurable 268 rate, out of a given interface. It is used for network interface 269 stress testing and performance analysis. If you don't understand 270 what was just said, you don't need it: say N. 271 272 Documentation on how to use the packet generator can be found 273 at <file:Documentation/networking/pktgen.txt>. 274 275 To compile this code as a module, choose M here: the 276 module will be called pktgen. 277 278config NET_TCPPROBE 279 tristate "TCP connection probing" 280 depends on INET && PROC_FS && KPROBES 281 ---help--- 282 This module allows for capturing the changes to TCP connection 283 state in response to incoming packets. It is used for debugging 284 TCP congestion avoidance modules. If you don't understand 285 what was just said, you don't need it: say N. 286 287 Documentation on how to use TCP connection probing can be found 288 at: 289 290 http://www.linuxfoundation.org/collaborate/workgroups/networking/tcpprobe 291 292 To compile this code as a module, choose M here: the 293 module will be called tcp_probe. 294 295config NET_DROP_MONITOR 296 tristate "Network packet drop alerting service" 297 depends on INET && TRACEPOINTS 298 ---help--- 299 This feature provides an alerting service to userspace in the 300 event that packets are discarded in the network stack. Alerts 301 are broadcast via netlink socket to any listening user space 302 process. If you don't need network drop alerts, or if you are ok 303 just checking the various proc files and other utilities for 304 drop statistics, say N here. 305 306endmenu 307 308endmenu 309 310source "net/ax25/Kconfig" 311source "net/can/Kconfig" 312source "net/irda/Kconfig" 313source "net/bluetooth/Kconfig" 314source "net/rxrpc/Kconfig" 315 316config FIB_RULES 317 bool 318 319menuconfig WIRELESS 320 bool "Wireless" 321 depends on !S390 322 default y 323 324if WIRELESS 325 326source "net/wireless/Kconfig" 327source "net/mac80211/Kconfig" 328 329endif # WIRELESS 330 331source "net/wimax/Kconfig" 332 333source "net/rfkill/Kconfig" 334source "net/9p/Kconfig" 335source "net/caif/Kconfig" 336source "net/ceph/Kconfig" 337source "net/nfc/Kconfig" 338 339 340endif # if NET 341 342# Used by archs to tell that they support BPF_JIT 343config HAVE_BPF_JIT 344 bool 345