xref: /linux/kernel/time/jiffies.c (revision 7ff836f064e2c814a7504c91a4464eea45d475bd)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * This file contains the jiffies based clocksource.
4  *
5  * Copyright (C) 2004, 2005 IBM, John Stultz (johnstul@us.ibm.com)
6  */
7 #include <linux/clocksource.h>
8 #include <linux/jiffies.h>
9 #include <linux/module.h>
10 #include <linux/init.h>
11 
12 #include "timekeeping.h"
13 
14 
15 /* Since jiffies uses a simple TICK_NSEC multiplier
16  * conversion, the .shift value could be zero. However
17  * this would make NTP adjustments impossible as they are
18  * in units of 1/2^.shift. Thus we use JIFFIES_SHIFT to
19  * shift both the nominator and denominator the same
20  * amount, and give ntp adjustments in units of 1/2^8
21  *
22  * The value 8 is somewhat carefully chosen, as anything
23  * larger can result in overflows. TICK_NSEC grows as HZ
24  * shrinks, so values greater than 8 overflow 32bits when
25  * HZ=100.
26  */
27 #if HZ < 34
28 #define JIFFIES_SHIFT	6
29 #elif HZ < 67
30 #define JIFFIES_SHIFT	7
31 #else
32 #define JIFFIES_SHIFT	8
33 #endif
34 
35 static u64 jiffies_read(struct clocksource *cs)
36 {
37 	return (u64) jiffies;
38 }
39 
40 /*
41  * The Jiffies based clocksource is the lowest common
42  * denominator clock source which should function on
43  * all systems. It has the same coarse resolution as
44  * the timer interrupt frequency HZ and it suffers
45  * inaccuracies caused by missed or lost timer
46  * interrupts and the inability for the timer
47  * interrupt hardware to accuratly tick at the
48  * requested HZ value. It is also not recommended
49  * for "tick-less" systems.
50  */
51 static struct clocksource clocksource_jiffies = {
52 	.name		= "jiffies",
53 	.rating		= 1, /* lowest valid rating*/
54 	.read		= jiffies_read,
55 	.mask		= CLOCKSOURCE_MASK(32),
56 	.mult		= TICK_NSEC << JIFFIES_SHIFT, /* details above */
57 	.shift		= JIFFIES_SHIFT,
58 	.max_cycles	= 10,
59 };
60 
61 __cacheline_aligned_in_smp DEFINE_SEQLOCK(jiffies_lock);
62 
63 #if (BITS_PER_LONG < 64)
64 u64 get_jiffies_64(void)
65 {
66 	unsigned int seq;
67 	u64 ret;
68 
69 	do {
70 		seq = read_seqbegin(&jiffies_lock);
71 		ret = jiffies_64;
72 	} while (read_seqretry(&jiffies_lock, seq));
73 	return ret;
74 }
75 EXPORT_SYMBOL(get_jiffies_64);
76 #endif
77 
78 EXPORT_SYMBOL(jiffies);
79 
80 static int __init init_jiffies_clocksource(void)
81 {
82 	return __clocksource_register(&clocksource_jiffies);
83 }
84 
85 core_initcall(init_jiffies_clocksource);
86 
87 struct clocksource * __init __weak clocksource_default_clock(void)
88 {
89 	return &clocksource_jiffies;
90 }
91 
92 static struct clocksource refined_jiffies;
93 
94 int register_refined_jiffies(long cycles_per_second)
95 {
96 	u64 nsec_per_tick, shift_hz;
97 	long cycles_per_tick;
98 
99 
100 
101 	refined_jiffies = clocksource_jiffies;
102 	refined_jiffies.name = "refined-jiffies";
103 	refined_jiffies.rating++;
104 
105 	/* Calc cycles per tick */
106 	cycles_per_tick = (cycles_per_second + HZ/2)/HZ;
107 	/* shift_hz stores hz<<8 for extra accuracy */
108 	shift_hz = (u64)cycles_per_second << 8;
109 	shift_hz += cycles_per_tick/2;
110 	do_div(shift_hz, cycles_per_tick);
111 	/* Calculate nsec_per_tick using shift_hz */
112 	nsec_per_tick = (u64)NSEC_PER_SEC << 8;
113 	nsec_per_tick += (u32)shift_hz/2;
114 	do_div(nsec_per_tick, (u32)shift_hz);
115 
116 	refined_jiffies.mult = ((u32)nsec_per_tick) << JIFFIES_SHIFT;
117 
118 	__clocksource_register(&refined_jiffies);
119 	return 0;
120 }
121