1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Read-Copy Update mechanism for mutual exclusion 4 * 5 * Copyright IBM Corporation, 2001 6 * 7 * Authors: Dipankar Sarma <dipankar@in.ibm.com> 8 * Manfred Spraul <manfred@colorfullife.com> 9 * 10 * Based on the original work by Paul McKenney <paulmck@linux.ibm.com> 11 * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen. 12 * Papers: 13 * http://www.rdrop.com/users/paulmck/paper/rclockpdcsproof.pdf 14 * http://lse.sourceforge.net/locking/rclock_OLS.2001.05.01c.sc.pdf (OLS2001) 15 * 16 * For detailed explanation of Read-Copy Update mechanism see - 17 * http://lse.sourceforge.net/locking/rcupdate.html 18 * 19 */ 20 #include <linux/types.h> 21 #include <linux/kernel.h> 22 #include <linux/init.h> 23 #include <linux/spinlock.h> 24 #include <linux/smp.h> 25 #include <linux/interrupt.h> 26 #include <linux/sched/signal.h> 27 #include <linux/sched/debug.h> 28 #include <linux/atomic.h> 29 #include <linux/bitops.h> 30 #include <linux/percpu.h> 31 #include <linux/notifier.h> 32 #include <linux/cpu.h> 33 #include <linux/mutex.h> 34 #include <linux/export.h> 35 #include <linux/hardirq.h> 36 #include <linux/delay.h> 37 #include <linux/moduleparam.h> 38 #include <linux/kthread.h> 39 #include <linux/tick.h> 40 #include <linux/rcupdate_wait.h> 41 #include <linux/sched/isolation.h> 42 #include <linux/kprobes.h> 43 #include <linux/slab.h> 44 #include <linux/irq_work.h> 45 #include <linux/rcupdate_trace.h> 46 47 #define CREATE_TRACE_POINTS 48 49 #include "rcu.h" 50 51 #ifdef MODULE_PARAM_PREFIX 52 #undef MODULE_PARAM_PREFIX 53 #endif 54 #define MODULE_PARAM_PREFIX "rcupdate." 55 56 #ifndef CONFIG_TINY_RCU 57 module_param(rcu_expedited, int, 0); 58 module_param(rcu_normal, int, 0); 59 static int rcu_normal_after_boot = IS_ENABLED(CONFIG_PREEMPT_RT); 60 #ifndef CONFIG_PREEMPT_RT 61 module_param(rcu_normal_after_boot, int, 0); 62 #endif 63 #endif /* #ifndef CONFIG_TINY_RCU */ 64 65 #ifdef CONFIG_DEBUG_LOCK_ALLOC 66 /** 67 * rcu_read_lock_held_common() - might we be in RCU-sched read-side critical section? 68 * @ret: Best guess answer if lockdep cannot be relied on 69 * 70 * Returns true if lockdep must be ignored, in which case ``*ret`` contains 71 * the best guess described below. Otherwise returns false, in which 72 * case ``*ret`` tells the caller nothing and the caller should instead 73 * consult lockdep. 74 * 75 * If CONFIG_DEBUG_LOCK_ALLOC is selected, set ``*ret`` to nonzero iff in an 76 * RCU-sched read-side critical section. In absence of 77 * CONFIG_DEBUG_LOCK_ALLOC, this assumes we are in an RCU-sched read-side 78 * critical section unless it can prove otherwise. Note that disabling 79 * of preemption (including disabling irqs) counts as an RCU-sched 80 * read-side critical section. This is useful for debug checks in functions 81 * that required that they be called within an RCU-sched read-side 82 * critical section. 83 * 84 * Check debug_lockdep_rcu_enabled() to prevent false positives during boot 85 * and while lockdep is disabled. 86 * 87 * Note that if the CPU is in the idle loop from an RCU point of view (ie: 88 * that we are in the section between rcu_idle_enter() and rcu_idle_exit()) 89 * then rcu_read_lock_held() sets ``*ret`` to false even if the CPU did an 90 * rcu_read_lock(). The reason for this is that RCU ignores CPUs that are 91 * in such a section, considering these as in extended quiescent state, 92 * so such a CPU is effectively never in an RCU read-side critical section 93 * regardless of what RCU primitives it invokes. This state of affairs is 94 * required --- we need to keep an RCU-free window in idle where the CPU may 95 * possibly enter into low power mode. This way we can notice an extended 96 * quiescent state to other CPUs that started a grace period. Otherwise 97 * we would delay any grace period as long as we run in the idle task. 98 * 99 * Similarly, we avoid claiming an RCU read lock held if the current 100 * CPU is offline. 101 */ 102 static bool rcu_read_lock_held_common(bool *ret) 103 { 104 if (!debug_lockdep_rcu_enabled()) { 105 *ret = true; 106 return true; 107 } 108 if (!rcu_is_watching()) { 109 *ret = false; 110 return true; 111 } 112 if (!rcu_lockdep_current_cpu_online()) { 113 *ret = false; 114 return true; 115 } 116 return false; 117 } 118 119 int rcu_read_lock_sched_held(void) 120 { 121 bool ret; 122 123 if (rcu_read_lock_held_common(&ret)) 124 return ret; 125 return lock_is_held(&rcu_sched_lock_map) || !preemptible(); 126 } 127 EXPORT_SYMBOL(rcu_read_lock_sched_held); 128 #endif 129 130 #ifndef CONFIG_TINY_RCU 131 132 /* 133 * Should expedited grace-period primitives always fall back to their 134 * non-expedited counterparts? Intended for use within RCU. Note 135 * that if the user specifies both rcu_expedited and rcu_normal, then 136 * rcu_normal wins. (Except during the time period during boot from 137 * when the first task is spawned until the rcu_set_runtime_mode() 138 * core_initcall() is invoked, at which point everything is expedited.) 139 */ 140 bool rcu_gp_is_normal(void) 141 { 142 return READ_ONCE(rcu_normal) && 143 rcu_scheduler_active != RCU_SCHEDULER_INIT; 144 } 145 EXPORT_SYMBOL_GPL(rcu_gp_is_normal); 146 147 static atomic_t rcu_expedited_nesting = ATOMIC_INIT(1); 148 149 /* 150 * Should normal grace-period primitives be expedited? Intended for 151 * use within RCU. Note that this function takes the rcu_expedited 152 * sysfs/boot variable and rcu_scheduler_active into account as well 153 * as the rcu_expedite_gp() nesting. So looping on rcu_unexpedite_gp() 154 * until rcu_gp_is_expedited() returns false is a -really- bad idea. 155 */ 156 bool rcu_gp_is_expedited(void) 157 { 158 return rcu_expedited || atomic_read(&rcu_expedited_nesting); 159 } 160 EXPORT_SYMBOL_GPL(rcu_gp_is_expedited); 161 162 /** 163 * rcu_expedite_gp - Expedite future RCU grace periods 164 * 165 * After a call to this function, future calls to synchronize_rcu() and 166 * friends act as the corresponding synchronize_rcu_expedited() function 167 * had instead been called. 168 */ 169 void rcu_expedite_gp(void) 170 { 171 atomic_inc(&rcu_expedited_nesting); 172 } 173 EXPORT_SYMBOL_GPL(rcu_expedite_gp); 174 175 /** 176 * rcu_unexpedite_gp - Cancel prior rcu_expedite_gp() invocation 177 * 178 * Undo a prior call to rcu_expedite_gp(). If all prior calls to 179 * rcu_expedite_gp() are undone by a subsequent call to rcu_unexpedite_gp(), 180 * and if the rcu_expedited sysfs/boot parameter is not set, then all 181 * subsequent calls to synchronize_rcu() and friends will return to 182 * their normal non-expedited behavior. 183 */ 184 void rcu_unexpedite_gp(void) 185 { 186 atomic_dec(&rcu_expedited_nesting); 187 } 188 EXPORT_SYMBOL_GPL(rcu_unexpedite_gp); 189 190 static bool rcu_boot_ended __read_mostly; 191 192 /* 193 * Inform RCU of the end of the in-kernel boot sequence. 194 */ 195 void rcu_end_inkernel_boot(void) 196 { 197 rcu_unexpedite_gp(); 198 if (rcu_normal_after_boot) 199 WRITE_ONCE(rcu_normal, 1); 200 rcu_boot_ended = true; 201 } 202 203 /* 204 * Let rcutorture know when it is OK to turn it up to eleven. 205 */ 206 bool rcu_inkernel_boot_has_ended(void) 207 { 208 return rcu_boot_ended; 209 } 210 EXPORT_SYMBOL_GPL(rcu_inkernel_boot_has_ended); 211 212 #endif /* #ifndef CONFIG_TINY_RCU */ 213 214 /* 215 * Test each non-SRCU synchronous grace-period wait API. This is 216 * useful just after a change in mode for these primitives, and 217 * during early boot. 218 */ 219 void rcu_test_sync_prims(void) 220 { 221 if (!IS_ENABLED(CONFIG_PROVE_RCU)) 222 return; 223 synchronize_rcu(); 224 synchronize_rcu_expedited(); 225 } 226 227 #if !defined(CONFIG_TINY_RCU) || defined(CONFIG_SRCU) 228 229 /* 230 * Switch to run-time mode once RCU has fully initialized. 231 */ 232 static int __init rcu_set_runtime_mode(void) 233 { 234 rcu_test_sync_prims(); 235 rcu_scheduler_active = RCU_SCHEDULER_RUNNING; 236 kfree_rcu_scheduler_running(); 237 rcu_test_sync_prims(); 238 return 0; 239 } 240 core_initcall(rcu_set_runtime_mode); 241 242 #endif /* #if !defined(CONFIG_TINY_RCU) || defined(CONFIG_SRCU) */ 243 244 #ifdef CONFIG_DEBUG_LOCK_ALLOC 245 static struct lock_class_key rcu_lock_key; 246 struct lockdep_map rcu_lock_map = { 247 .name = "rcu_read_lock", 248 .key = &rcu_lock_key, 249 .wait_type_outer = LD_WAIT_FREE, 250 .wait_type_inner = LD_WAIT_CONFIG, /* XXX PREEMPT_RCU ? */ 251 }; 252 EXPORT_SYMBOL_GPL(rcu_lock_map); 253 254 static struct lock_class_key rcu_bh_lock_key; 255 struct lockdep_map rcu_bh_lock_map = { 256 .name = "rcu_read_lock_bh", 257 .key = &rcu_bh_lock_key, 258 .wait_type_outer = LD_WAIT_FREE, 259 .wait_type_inner = LD_WAIT_CONFIG, /* PREEMPT_LOCK also makes BH preemptible */ 260 }; 261 EXPORT_SYMBOL_GPL(rcu_bh_lock_map); 262 263 static struct lock_class_key rcu_sched_lock_key; 264 struct lockdep_map rcu_sched_lock_map = { 265 .name = "rcu_read_lock_sched", 266 .key = &rcu_sched_lock_key, 267 .wait_type_outer = LD_WAIT_FREE, 268 .wait_type_inner = LD_WAIT_SPIN, 269 }; 270 EXPORT_SYMBOL_GPL(rcu_sched_lock_map); 271 272 // Tell lockdep when RCU callbacks are being invoked. 273 static struct lock_class_key rcu_callback_key; 274 struct lockdep_map rcu_callback_map = 275 STATIC_LOCKDEP_MAP_INIT("rcu_callback", &rcu_callback_key); 276 EXPORT_SYMBOL_GPL(rcu_callback_map); 277 278 noinstr int notrace debug_lockdep_rcu_enabled(void) 279 { 280 return rcu_scheduler_active != RCU_SCHEDULER_INACTIVE && debug_locks && 281 current->lockdep_recursion == 0; 282 } 283 EXPORT_SYMBOL_GPL(debug_lockdep_rcu_enabled); 284 285 /** 286 * rcu_read_lock_held() - might we be in RCU read-side critical section? 287 * 288 * If CONFIG_DEBUG_LOCK_ALLOC is selected, returns nonzero iff in an RCU 289 * read-side critical section. In absence of CONFIG_DEBUG_LOCK_ALLOC, 290 * this assumes we are in an RCU read-side critical section unless it can 291 * prove otherwise. This is useful for debug checks in functions that 292 * require that they be called within an RCU read-side critical section. 293 * 294 * Checks debug_lockdep_rcu_enabled() to prevent false positives during boot 295 * and while lockdep is disabled. 296 * 297 * Note that rcu_read_lock() and the matching rcu_read_unlock() must 298 * occur in the same context, for example, it is illegal to invoke 299 * rcu_read_unlock() in process context if the matching rcu_read_lock() 300 * was invoked from within an irq handler. 301 * 302 * Note that rcu_read_lock() is disallowed if the CPU is either idle or 303 * offline from an RCU perspective, so check for those as well. 304 */ 305 int rcu_read_lock_held(void) 306 { 307 bool ret; 308 309 if (rcu_read_lock_held_common(&ret)) 310 return ret; 311 return lock_is_held(&rcu_lock_map); 312 } 313 EXPORT_SYMBOL_GPL(rcu_read_lock_held); 314 315 /** 316 * rcu_read_lock_bh_held() - might we be in RCU-bh read-side critical section? 317 * 318 * Check for bottom half being disabled, which covers both the 319 * CONFIG_PROVE_RCU and not cases. Note that if someone uses 320 * rcu_read_lock_bh(), but then later enables BH, lockdep (if enabled) 321 * will show the situation. This is useful for debug checks in functions 322 * that require that they be called within an RCU read-side critical 323 * section. 324 * 325 * Check debug_lockdep_rcu_enabled() to prevent false positives during boot. 326 * 327 * Note that rcu_read_lock_bh() is disallowed if the CPU is either idle or 328 * offline from an RCU perspective, so check for those as well. 329 */ 330 int rcu_read_lock_bh_held(void) 331 { 332 bool ret; 333 334 if (rcu_read_lock_held_common(&ret)) 335 return ret; 336 return in_softirq() || irqs_disabled(); 337 } 338 EXPORT_SYMBOL_GPL(rcu_read_lock_bh_held); 339 340 int rcu_read_lock_any_held(void) 341 { 342 bool ret; 343 344 if (rcu_read_lock_held_common(&ret)) 345 return ret; 346 if (lock_is_held(&rcu_lock_map) || 347 lock_is_held(&rcu_bh_lock_map) || 348 lock_is_held(&rcu_sched_lock_map)) 349 return 1; 350 return !preemptible(); 351 } 352 EXPORT_SYMBOL_GPL(rcu_read_lock_any_held); 353 354 #endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */ 355 356 /** 357 * wakeme_after_rcu() - Callback function to awaken a task after grace period 358 * @head: Pointer to rcu_head member within rcu_synchronize structure 359 * 360 * Awaken the corresponding task now that a grace period has elapsed. 361 */ 362 void wakeme_after_rcu(struct rcu_head *head) 363 { 364 struct rcu_synchronize *rcu; 365 366 rcu = container_of(head, struct rcu_synchronize, head); 367 complete(&rcu->completion); 368 } 369 EXPORT_SYMBOL_GPL(wakeme_after_rcu); 370 371 void __wait_rcu_gp(bool checktiny, int n, call_rcu_func_t *crcu_array, 372 struct rcu_synchronize *rs_array) 373 { 374 int i; 375 int j; 376 377 /* Initialize and register callbacks for each crcu_array element. */ 378 for (i = 0; i < n; i++) { 379 if (checktiny && 380 (crcu_array[i] == call_rcu)) { 381 might_sleep(); 382 continue; 383 } 384 for (j = 0; j < i; j++) 385 if (crcu_array[j] == crcu_array[i]) 386 break; 387 if (j == i) { 388 init_rcu_head_on_stack(&rs_array[i].head); 389 init_completion(&rs_array[i].completion); 390 (crcu_array[i])(&rs_array[i].head, wakeme_after_rcu); 391 } 392 } 393 394 /* Wait for all callbacks to be invoked. */ 395 for (i = 0; i < n; i++) { 396 if (checktiny && 397 (crcu_array[i] == call_rcu)) 398 continue; 399 for (j = 0; j < i; j++) 400 if (crcu_array[j] == crcu_array[i]) 401 break; 402 if (j == i) { 403 wait_for_completion(&rs_array[i].completion); 404 destroy_rcu_head_on_stack(&rs_array[i].head); 405 } 406 } 407 } 408 EXPORT_SYMBOL_GPL(__wait_rcu_gp); 409 410 #ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD 411 void init_rcu_head(struct rcu_head *head) 412 { 413 debug_object_init(head, &rcuhead_debug_descr); 414 } 415 EXPORT_SYMBOL_GPL(init_rcu_head); 416 417 void destroy_rcu_head(struct rcu_head *head) 418 { 419 debug_object_free(head, &rcuhead_debug_descr); 420 } 421 EXPORT_SYMBOL_GPL(destroy_rcu_head); 422 423 static bool rcuhead_is_static_object(void *addr) 424 { 425 return true; 426 } 427 428 /** 429 * init_rcu_head_on_stack() - initialize on-stack rcu_head for debugobjects 430 * @head: pointer to rcu_head structure to be initialized 431 * 432 * This function informs debugobjects of a new rcu_head structure that 433 * has been allocated as an auto variable on the stack. This function 434 * is not required for rcu_head structures that are statically defined or 435 * that are dynamically allocated on the heap. This function has no 436 * effect for !CONFIG_DEBUG_OBJECTS_RCU_HEAD kernel builds. 437 */ 438 void init_rcu_head_on_stack(struct rcu_head *head) 439 { 440 debug_object_init_on_stack(head, &rcuhead_debug_descr); 441 } 442 EXPORT_SYMBOL_GPL(init_rcu_head_on_stack); 443 444 /** 445 * destroy_rcu_head_on_stack() - destroy on-stack rcu_head for debugobjects 446 * @head: pointer to rcu_head structure to be initialized 447 * 448 * This function informs debugobjects that an on-stack rcu_head structure 449 * is about to go out of scope. As with init_rcu_head_on_stack(), this 450 * function is not required for rcu_head structures that are statically 451 * defined or that are dynamically allocated on the heap. Also as with 452 * init_rcu_head_on_stack(), this function has no effect for 453 * !CONFIG_DEBUG_OBJECTS_RCU_HEAD kernel builds. 454 */ 455 void destroy_rcu_head_on_stack(struct rcu_head *head) 456 { 457 debug_object_free(head, &rcuhead_debug_descr); 458 } 459 EXPORT_SYMBOL_GPL(destroy_rcu_head_on_stack); 460 461 const struct debug_obj_descr rcuhead_debug_descr = { 462 .name = "rcu_head", 463 .is_static_object = rcuhead_is_static_object, 464 }; 465 EXPORT_SYMBOL_GPL(rcuhead_debug_descr); 466 #endif /* #ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD */ 467 468 #if defined(CONFIG_TREE_RCU) || defined(CONFIG_RCU_TRACE) 469 void do_trace_rcu_torture_read(const char *rcutorturename, struct rcu_head *rhp, 470 unsigned long secs, 471 unsigned long c_old, unsigned long c) 472 { 473 trace_rcu_torture_read(rcutorturename, rhp, secs, c_old, c); 474 } 475 EXPORT_SYMBOL_GPL(do_trace_rcu_torture_read); 476 #else 477 #define do_trace_rcu_torture_read(rcutorturename, rhp, secs, c_old, c) \ 478 do { } while (0) 479 #endif 480 481 #if IS_ENABLED(CONFIG_RCU_TORTURE_TEST) || IS_MODULE(CONFIG_RCU_TORTURE_TEST) 482 /* Get rcutorture access to sched_setaffinity(). */ 483 long rcutorture_sched_setaffinity(pid_t pid, const struct cpumask *in_mask) 484 { 485 int ret; 486 487 ret = sched_setaffinity(pid, in_mask); 488 WARN_ONCE(ret, "%s: sched_setaffinity() returned %d\n", __func__, ret); 489 return ret; 490 } 491 EXPORT_SYMBOL_GPL(rcutorture_sched_setaffinity); 492 #endif 493 494 #ifdef CONFIG_RCU_STALL_COMMON 495 int rcu_cpu_stall_ftrace_dump __read_mostly; 496 module_param(rcu_cpu_stall_ftrace_dump, int, 0644); 497 int rcu_cpu_stall_suppress __read_mostly; // !0 = suppress stall warnings. 498 EXPORT_SYMBOL_GPL(rcu_cpu_stall_suppress); 499 module_param(rcu_cpu_stall_suppress, int, 0644); 500 int rcu_cpu_stall_timeout __read_mostly = CONFIG_RCU_CPU_STALL_TIMEOUT; 501 module_param(rcu_cpu_stall_timeout, int, 0644); 502 #endif /* #ifdef CONFIG_RCU_STALL_COMMON */ 503 504 // Suppress boot-time RCU CPU stall warnings and rcutorture writer stall 505 // warnings. Also used by rcutorture even if stall warnings are excluded. 506 int rcu_cpu_stall_suppress_at_boot __read_mostly; // !0 = suppress boot stalls. 507 EXPORT_SYMBOL_GPL(rcu_cpu_stall_suppress_at_boot); 508 module_param(rcu_cpu_stall_suppress_at_boot, int, 0444); 509 510 #ifdef CONFIG_PROVE_RCU 511 512 /* 513 * Early boot self test parameters. 514 */ 515 static bool rcu_self_test; 516 module_param(rcu_self_test, bool, 0444); 517 518 static int rcu_self_test_counter; 519 520 static void test_callback(struct rcu_head *r) 521 { 522 rcu_self_test_counter++; 523 pr_info("RCU test callback executed %d\n", rcu_self_test_counter); 524 } 525 526 DEFINE_STATIC_SRCU(early_srcu); 527 528 struct early_boot_kfree_rcu { 529 struct rcu_head rh; 530 }; 531 532 static void early_boot_test_call_rcu(void) 533 { 534 static struct rcu_head head; 535 static struct rcu_head shead; 536 struct early_boot_kfree_rcu *rhp; 537 538 call_rcu(&head, test_callback); 539 if (IS_ENABLED(CONFIG_SRCU)) 540 call_srcu(&early_srcu, &shead, test_callback); 541 rhp = kmalloc(sizeof(*rhp), GFP_KERNEL); 542 if (!WARN_ON_ONCE(!rhp)) 543 kfree_rcu(rhp, rh); 544 } 545 546 void rcu_early_boot_tests(void) 547 { 548 pr_info("Running RCU self tests\n"); 549 550 if (rcu_self_test) 551 early_boot_test_call_rcu(); 552 rcu_test_sync_prims(); 553 } 554 555 static int rcu_verify_early_boot_tests(void) 556 { 557 int ret = 0; 558 int early_boot_test_counter = 0; 559 560 if (rcu_self_test) { 561 early_boot_test_counter++; 562 rcu_barrier(); 563 if (IS_ENABLED(CONFIG_SRCU)) { 564 early_boot_test_counter++; 565 srcu_barrier(&early_srcu); 566 } 567 } 568 if (rcu_self_test_counter != early_boot_test_counter) { 569 WARN_ON(1); 570 ret = -1; 571 } 572 573 return ret; 574 } 575 late_initcall(rcu_verify_early_boot_tests); 576 #else 577 void rcu_early_boot_tests(void) {} 578 #endif /* CONFIG_PROVE_RCU */ 579 580 #include "tasks.h" 581 582 #ifndef CONFIG_TINY_RCU 583 584 /* 585 * Print any significant non-default boot-time settings. 586 */ 587 void __init rcupdate_announce_bootup_oddness(void) 588 { 589 if (rcu_normal) 590 pr_info("\tNo expedited grace period (rcu_normal).\n"); 591 else if (rcu_normal_after_boot) 592 pr_info("\tNo expedited grace period (rcu_normal_after_boot).\n"); 593 else if (rcu_expedited) 594 pr_info("\tAll grace periods are expedited (rcu_expedited).\n"); 595 if (rcu_cpu_stall_suppress) 596 pr_info("\tRCU CPU stall warnings suppressed (rcu_cpu_stall_suppress).\n"); 597 if (rcu_cpu_stall_timeout != CONFIG_RCU_CPU_STALL_TIMEOUT) 598 pr_info("\tRCU CPU stall warnings timeout set to %d (rcu_cpu_stall_timeout).\n", rcu_cpu_stall_timeout); 599 rcu_tasks_bootup_oddness(); 600 } 601 602 #endif /* #ifndef CONFIG_TINY_RCU */ 603