xref: /linux/kernel/power/hibernate.c (revision e42f6f9be4f83c537aa81b4c6239ea94ff5b29ce)
1 /*
2  * kernel/power/hibernate.c - Hibernation (a.k.a suspend-to-disk) support.
3  *
4  * Copyright (c) 2003 Patrick Mochel
5  * Copyright (c) 2003 Open Source Development Lab
6  * Copyright (c) 2004 Pavel Machek <pavel@ucw.cz>
7  * Copyright (c) 2009 Rafael J. Wysocki, Novell Inc.
8  * Copyright (C) 2012 Bojan Smojver <bojan@rexursive.com>
9  *
10  * This file is released under the GPLv2.
11  */
12 
13 #define pr_fmt(fmt) "PM: " fmt
14 
15 #include <linux/export.h>
16 #include <linux/suspend.h>
17 #include <linux/syscalls.h>
18 #include <linux/reboot.h>
19 #include <linux/string.h>
20 #include <linux/device.h>
21 #include <linux/async.h>
22 #include <linux/delay.h>
23 #include <linux/fs.h>
24 #include <linux/mount.h>
25 #include <linux/pm.h>
26 #include <linux/nmi.h>
27 #include <linux/console.h>
28 #include <linux/cpu.h>
29 #include <linux/freezer.h>
30 #include <linux/gfp.h>
31 #include <linux/syscore_ops.h>
32 #include <linux/ctype.h>
33 #include <linux/genhd.h>
34 #include <linux/ktime.h>
35 #include <trace/events/power.h>
36 
37 #include "power.h"
38 
39 
40 static int nocompress;
41 static int noresume;
42 static int nohibernate;
43 static int resume_wait;
44 static unsigned int resume_delay;
45 static char resume_file[256] = CONFIG_PM_STD_PARTITION;
46 dev_t swsusp_resume_device;
47 sector_t swsusp_resume_block;
48 __visible int in_suspend __nosavedata;
49 
50 enum {
51 	HIBERNATION_INVALID,
52 	HIBERNATION_PLATFORM,
53 	HIBERNATION_SHUTDOWN,
54 	HIBERNATION_REBOOT,
55 #ifdef CONFIG_SUSPEND
56 	HIBERNATION_SUSPEND,
57 #endif
58 	HIBERNATION_TEST_RESUME,
59 	/* keep last */
60 	__HIBERNATION_AFTER_LAST
61 };
62 #define HIBERNATION_MAX (__HIBERNATION_AFTER_LAST-1)
63 #define HIBERNATION_FIRST (HIBERNATION_INVALID + 1)
64 
65 static int hibernation_mode = HIBERNATION_SHUTDOWN;
66 
67 bool freezer_test_done;
68 
69 static const struct platform_hibernation_ops *hibernation_ops;
70 
71 bool hibernation_available(void)
72 {
73 	return (nohibernate == 0);
74 }
75 
76 /**
77  * hibernation_set_ops - Set the global hibernate operations.
78  * @ops: Hibernation operations to use in subsequent hibernation transitions.
79  */
80 void hibernation_set_ops(const struct platform_hibernation_ops *ops)
81 {
82 	if (ops && !(ops->begin && ops->end &&  ops->pre_snapshot
83 	    && ops->prepare && ops->finish && ops->enter && ops->pre_restore
84 	    && ops->restore_cleanup && ops->leave)) {
85 		WARN_ON(1);
86 		return;
87 	}
88 	lock_system_sleep();
89 	hibernation_ops = ops;
90 	if (ops)
91 		hibernation_mode = HIBERNATION_PLATFORM;
92 	else if (hibernation_mode == HIBERNATION_PLATFORM)
93 		hibernation_mode = HIBERNATION_SHUTDOWN;
94 
95 	unlock_system_sleep();
96 }
97 EXPORT_SYMBOL_GPL(hibernation_set_ops);
98 
99 static bool entering_platform_hibernation;
100 
101 bool system_entering_hibernation(void)
102 {
103 	return entering_platform_hibernation;
104 }
105 EXPORT_SYMBOL(system_entering_hibernation);
106 
107 #ifdef CONFIG_PM_DEBUG
108 static void hibernation_debug_sleep(void)
109 {
110 	pr_info("hibernation debug: Waiting for 5 seconds.\n");
111 	mdelay(5000);
112 }
113 
114 static int hibernation_test(int level)
115 {
116 	if (pm_test_level == level) {
117 		hibernation_debug_sleep();
118 		return 1;
119 	}
120 	return 0;
121 }
122 #else /* !CONFIG_PM_DEBUG */
123 static int hibernation_test(int level) { return 0; }
124 #endif /* !CONFIG_PM_DEBUG */
125 
126 /**
127  * platform_begin - Call platform to start hibernation.
128  * @platform_mode: Whether or not to use the platform driver.
129  */
130 static int platform_begin(int platform_mode)
131 {
132 	return (platform_mode && hibernation_ops) ?
133 		hibernation_ops->begin() : 0;
134 }
135 
136 /**
137  * platform_end - Call platform to finish transition to the working state.
138  * @platform_mode: Whether or not to use the platform driver.
139  */
140 static void platform_end(int platform_mode)
141 {
142 	if (platform_mode && hibernation_ops)
143 		hibernation_ops->end();
144 }
145 
146 /**
147  * platform_pre_snapshot - Call platform to prepare the machine for hibernation.
148  * @platform_mode: Whether or not to use the platform driver.
149  *
150  * Use the platform driver to prepare the system for creating a hibernate image,
151  * if so configured, and return an error code if that fails.
152  */
153 
154 static int platform_pre_snapshot(int platform_mode)
155 {
156 	return (platform_mode && hibernation_ops) ?
157 		hibernation_ops->pre_snapshot() : 0;
158 }
159 
160 /**
161  * platform_leave - Call platform to prepare a transition to the working state.
162  * @platform_mode: Whether or not to use the platform driver.
163  *
164  * Use the platform driver prepare to prepare the machine for switching to the
165  * normal mode of operation.
166  *
167  * This routine is called on one CPU with interrupts disabled.
168  */
169 static void platform_leave(int platform_mode)
170 {
171 	if (platform_mode && hibernation_ops)
172 		hibernation_ops->leave();
173 }
174 
175 /**
176  * platform_finish - Call platform to switch the system to the working state.
177  * @platform_mode: Whether or not to use the platform driver.
178  *
179  * Use the platform driver to switch the machine to the normal mode of
180  * operation.
181  *
182  * This routine must be called after platform_prepare().
183  */
184 static void platform_finish(int platform_mode)
185 {
186 	if (platform_mode && hibernation_ops)
187 		hibernation_ops->finish();
188 }
189 
190 /**
191  * platform_pre_restore - Prepare for hibernate image restoration.
192  * @platform_mode: Whether or not to use the platform driver.
193  *
194  * Use the platform driver to prepare the system for resume from a hibernation
195  * image.
196  *
197  * If the restore fails after this function has been called,
198  * platform_restore_cleanup() must be called.
199  */
200 static int platform_pre_restore(int platform_mode)
201 {
202 	return (platform_mode && hibernation_ops) ?
203 		hibernation_ops->pre_restore() : 0;
204 }
205 
206 /**
207  * platform_restore_cleanup - Switch to the working state after failing restore.
208  * @platform_mode: Whether or not to use the platform driver.
209  *
210  * Use the platform driver to switch the system to the normal mode of operation
211  * after a failing restore.
212  *
213  * If platform_pre_restore() has been called before the failing restore, this
214  * function must be called too, regardless of the result of
215  * platform_pre_restore().
216  */
217 static void platform_restore_cleanup(int platform_mode)
218 {
219 	if (platform_mode && hibernation_ops)
220 		hibernation_ops->restore_cleanup();
221 }
222 
223 /**
224  * platform_recover - Recover from a failure to suspend devices.
225  * @platform_mode: Whether or not to use the platform driver.
226  */
227 static void platform_recover(int platform_mode)
228 {
229 	if (platform_mode && hibernation_ops && hibernation_ops->recover)
230 		hibernation_ops->recover();
231 }
232 
233 /**
234  * swsusp_show_speed - Print time elapsed between two events during hibernation.
235  * @start: Starting event.
236  * @stop: Final event.
237  * @nr_pages: Number of memory pages processed between @start and @stop.
238  * @msg: Additional diagnostic message to print.
239  */
240 void swsusp_show_speed(ktime_t start, ktime_t stop,
241 		      unsigned nr_pages, char *msg)
242 {
243 	ktime_t diff;
244 	u64 elapsed_centisecs64;
245 	unsigned int centisecs;
246 	unsigned int k;
247 	unsigned int kps;
248 
249 	diff = ktime_sub(stop, start);
250 	elapsed_centisecs64 = ktime_divns(diff, 10*NSEC_PER_MSEC);
251 	centisecs = elapsed_centisecs64;
252 	if (centisecs == 0)
253 		centisecs = 1;	/* avoid div-by-zero */
254 	k = nr_pages * (PAGE_SIZE / 1024);
255 	kps = (k * 100) / centisecs;
256 	pr_info("%s %u kbytes in %u.%02u seconds (%u.%02u MB/s)\n",
257 		msg, k, centisecs / 100, centisecs % 100, kps / 1000,
258 		(kps % 1000) / 10);
259 }
260 
261 /**
262  * create_image - Create a hibernation image.
263  * @platform_mode: Whether or not to use the platform driver.
264  *
265  * Execute device drivers' "late" and "noirq" freeze callbacks, create a
266  * hibernation image and run the drivers' "noirq" and "early" thaw callbacks.
267  *
268  * Control reappears in this routine after the subsequent restore.
269  */
270 static int create_image(int platform_mode)
271 {
272 	int error;
273 
274 	error = dpm_suspend_end(PMSG_FREEZE);
275 	if (error) {
276 		pr_err("Some devices failed to power down, aborting hibernation\n");
277 		return error;
278 	}
279 
280 	error = platform_pre_snapshot(platform_mode);
281 	if (error || hibernation_test(TEST_PLATFORM))
282 		goto Platform_finish;
283 
284 	error = disable_nonboot_cpus();
285 	if (error || hibernation_test(TEST_CPUS))
286 		goto Enable_cpus;
287 
288 	local_irq_disable();
289 
290 	system_state = SYSTEM_SUSPEND;
291 
292 	error = syscore_suspend();
293 	if (error) {
294 		pr_err("Some system devices failed to power down, aborting hibernation\n");
295 		goto Enable_irqs;
296 	}
297 
298 	if (hibernation_test(TEST_CORE) || pm_wakeup_pending())
299 		goto Power_up;
300 
301 	in_suspend = 1;
302 	save_processor_state();
303 	trace_suspend_resume(TPS("machine_suspend"), PM_EVENT_HIBERNATE, true);
304 	error = swsusp_arch_suspend();
305 	/* Restore control flow magically appears here */
306 	restore_processor_state();
307 	trace_suspend_resume(TPS("machine_suspend"), PM_EVENT_HIBERNATE, false);
308 	if (error)
309 		pr_err("Error %d creating hibernation image\n", error);
310 
311 	if (!in_suspend) {
312 		events_check_enabled = false;
313 		clear_free_pages();
314 	}
315 
316 	platform_leave(platform_mode);
317 
318  Power_up:
319 	syscore_resume();
320 
321  Enable_irqs:
322 	system_state = SYSTEM_RUNNING;
323 	local_irq_enable();
324 
325  Enable_cpus:
326 	enable_nonboot_cpus();
327 
328  Platform_finish:
329 	platform_finish(platform_mode);
330 
331 	dpm_resume_start(in_suspend ?
332 		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
333 
334 	return error;
335 }
336 
337 /**
338  * hibernation_snapshot - Quiesce devices and create a hibernation image.
339  * @platform_mode: If set, use platform driver to prepare for the transition.
340  *
341  * This routine must be called with system_transition_mutex held.
342  */
343 int hibernation_snapshot(int platform_mode)
344 {
345 	pm_message_t msg;
346 	int error;
347 
348 	pm_suspend_clear_flags();
349 	error = platform_begin(platform_mode);
350 	if (error)
351 		goto Close;
352 
353 	/* Preallocate image memory before shutting down devices. */
354 	error = hibernate_preallocate_memory();
355 	if (error)
356 		goto Close;
357 
358 	error = freeze_kernel_threads();
359 	if (error)
360 		goto Cleanup;
361 
362 	if (hibernation_test(TEST_FREEZER)) {
363 
364 		/*
365 		 * Indicate to the caller that we are returning due to a
366 		 * successful freezer test.
367 		 */
368 		freezer_test_done = true;
369 		goto Thaw;
370 	}
371 
372 	error = dpm_prepare(PMSG_FREEZE);
373 	if (error) {
374 		dpm_complete(PMSG_RECOVER);
375 		goto Thaw;
376 	}
377 
378 	suspend_console();
379 	pm_restrict_gfp_mask();
380 
381 	error = dpm_suspend(PMSG_FREEZE);
382 
383 	if (error || hibernation_test(TEST_DEVICES))
384 		platform_recover(platform_mode);
385 	else
386 		error = create_image(platform_mode);
387 
388 	/*
389 	 * In the case that we call create_image() above, the control
390 	 * returns here (1) after the image has been created or the
391 	 * image creation has failed and (2) after a successful restore.
392 	 */
393 
394 	/* We may need to release the preallocated image pages here. */
395 	if (error || !in_suspend)
396 		swsusp_free();
397 
398 	msg = in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE;
399 	dpm_resume(msg);
400 
401 	if (error || !in_suspend)
402 		pm_restore_gfp_mask();
403 
404 	resume_console();
405 	dpm_complete(msg);
406 
407  Close:
408 	platform_end(platform_mode);
409 	return error;
410 
411  Thaw:
412 	thaw_kernel_threads();
413  Cleanup:
414 	swsusp_free();
415 	goto Close;
416 }
417 
418 int __weak hibernate_resume_nonboot_cpu_disable(void)
419 {
420 	return disable_nonboot_cpus();
421 }
422 
423 /**
424  * resume_target_kernel - Restore system state from a hibernation image.
425  * @platform_mode: Whether or not to use the platform driver.
426  *
427  * Execute device drivers' "noirq" and "late" freeze callbacks, restore the
428  * contents of highmem that have not been restored yet from the image and run
429  * the low-level code that will restore the remaining contents of memory and
430  * switch to the just restored target kernel.
431  */
432 static int resume_target_kernel(bool platform_mode)
433 {
434 	int error;
435 
436 	error = dpm_suspend_end(PMSG_QUIESCE);
437 	if (error) {
438 		pr_err("Some devices failed to power down, aborting resume\n");
439 		return error;
440 	}
441 
442 	error = platform_pre_restore(platform_mode);
443 	if (error)
444 		goto Cleanup;
445 
446 	error = hibernate_resume_nonboot_cpu_disable();
447 	if (error)
448 		goto Enable_cpus;
449 
450 	local_irq_disable();
451 	system_state = SYSTEM_SUSPEND;
452 
453 	error = syscore_suspend();
454 	if (error)
455 		goto Enable_irqs;
456 
457 	save_processor_state();
458 	error = restore_highmem();
459 	if (!error) {
460 		error = swsusp_arch_resume();
461 		/*
462 		 * The code below is only ever reached in case of a failure.
463 		 * Otherwise, execution continues at the place where
464 		 * swsusp_arch_suspend() was called.
465 		 */
466 		BUG_ON(!error);
467 		/*
468 		 * This call to restore_highmem() reverts the changes made by
469 		 * the previous one.
470 		 */
471 		restore_highmem();
472 	}
473 	/*
474 	 * The only reason why swsusp_arch_resume() can fail is memory being
475 	 * very tight, so we have to free it as soon as we can to avoid
476 	 * subsequent failures.
477 	 */
478 	swsusp_free();
479 	restore_processor_state();
480 	touch_softlockup_watchdog();
481 
482 	syscore_resume();
483 
484  Enable_irqs:
485 	system_state = SYSTEM_RUNNING;
486 	local_irq_enable();
487 
488  Enable_cpus:
489 	enable_nonboot_cpus();
490 
491  Cleanup:
492 	platform_restore_cleanup(platform_mode);
493 
494 	dpm_resume_start(PMSG_RECOVER);
495 
496 	return error;
497 }
498 
499 /**
500  * hibernation_restore - Quiesce devices and restore from a hibernation image.
501  * @platform_mode: If set, use platform driver to prepare for the transition.
502  *
503  * This routine must be called with system_transition_mutex held.  If it is
504  * successful, control reappears in the restored target kernel in
505  * hibernation_snapshot().
506  */
507 int hibernation_restore(int platform_mode)
508 {
509 	int error;
510 
511 	pm_prepare_console();
512 	suspend_console();
513 	pm_restrict_gfp_mask();
514 	error = dpm_suspend_start(PMSG_QUIESCE);
515 	if (!error) {
516 		error = resume_target_kernel(platform_mode);
517 		/*
518 		 * The above should either succeed and jump to the new kernel,
519 		 * or return with an error. Otherwise things are just
520 		 * undefined, so let's be paranoid.
521 		 */
522 		BUG_ON(!error);
523 	}
524 	dpm_resume_end(PMSG_RECOVER);
525 	pm_restore_gfp_mask();
526 	resume_console();
527 	pm_restore_console();
528 	return error;
529 }
530 
531 /**
532  * hibernation_platform_enter - Power off the system using the platform driver.
533  */
534 int hibernation_platform_enter(void)
535 {
536 	int error;
537 
538 	if (!hibernation_ops)
539 		return -ENOSYS;
540 
541 	/*
542 	 * We have cancelled the power transition by running
543 	 * hibernation_ops->finish() before saving the image, so we should let
544 	 * the firmware know that we're going to enter the sleep state after all
545 	 */
546 	error = hibernation_ops->begin();
547 	if (error)
548 		goto Close;
549 
550 	entering_platform_hibernation = true;
551 	suspend_console();
552 	error = dpm_suspend_start(PMSG_HIBERNATE);
553 	if (error) {
554 		if (hibernation_ops->recover)
555 			hibernation_ops->recover();
556 		goto Resume_devices;
557 	}
558 
559 	error = dpm_suspend_end(PMSG_HIBERNATE);
560 	if (error)
561 		goto Resume_devices;
562 
563 	error = hibernation_ops->prepare();
564 	if (error)
565 		goto Platform_finish;
566 
567 	error = disable_nonboot_cpus();
568 	if (error)
569 		goto Enable_cpus;
570 
571 	local_irq_disable();
572 	system_state = SYSTEM_SUSPEND;
573 	syscore_suspend();
574 	if (pm_wakeup_pending()) {
575 		error = -EAGAIN;
576 		goto Power_up;
577 	}
578 
579 	hibernation_ops->enter();
580 	/* We should never get here */
581 	while (1);
582 
583  Power_up:
584 	syscore_resume();
585 	system_state = SYSTEM_RUNNING;
586 	local_irq_enable();
587 
588  Enable_cpus:
589 	enable_nonboot_cpus();
590 
591  Platform_finish:
592 	hibernation_ops->finish();
593 
594 	dpm_resume_start(PMSG_RESTORE);
595 
596  Resume_devices:
597 	entering_platform_hibernation = false;
598 	dpm_resume_end(PMSG_RESTORE);
599 	resume_console();
600 
601  Close:
602 	hibernation_ops->end();
603 
604 	return error;
605 }
606 
607 /**
608  * power_down - Shut the machine down for hibernation.
609  *
610  * Use the platform driver, if configured, to put the system into the sleep
611  * state corresponding to hibernation, or try to power it off or reboot,
612  * depending on the value of hibernation_mode.
613  */
614 static void power_down(void)
615 {
616 #ifdef CONFIG_SUSPEND
617 	int error;
618 
619 	if (hibernation_mode == HIBERNATION_SUSPEND) {
620 		error = suspend_devices_and_enter(PM_SUSPEND_MEM);
621 		if (error) {
622 			hibernation_mode = hibernation_ops ?
623 						HIBERNATION_PLATFORM :
624 						HIBERNATION_SHUTDOWN;
625 		} else {
626 			/* Restore swap signature. */
627 			error = swsusp_unmark();
628 			if (error)
629 				pr_err("Swap will be unusable! Try swapon -a.\n");
630 
631 			return;
632 		}
633 	}
634 #endif
635 
636 	switch (hibernation_mode) {
637 	case HIBERNATION_REBOOT:
638 		kernel_restart(NULL);
639 		break;
640 	case HIBERNATION_PLATFORM:
641 		hibernation_platform_enter();
642 		/* Fall through */
643 	case HIBERNATION_SHUTDOWN:
644 		if (pm_power_off)
645 			kernel_power_off();
646 		break;
647 	}
648 	kernel_halt();
649 	/*
650 	 * Valid image is on the disk, if we continue we risk serious data
651 	 * corruption after resume.
652 	 */
653 	pr_crit("Power down manually\n");
654 	while (1)
655 		cpu_relax();
656 }
657 
658 static int load_image_and_restore(void)
659 {
660 	int error;
661 	unsigned int flags;
662 
663 	pm_pr_dbg("Loading hibernation image.\n");
664 
665 	lock_device_hotplug();
666 	error = create_basic_memory_bitmaps();
667 	if (error)
668 		goto Unlock;
669 
670 	error = swsusp_read(&flags);
671 	swsusp_close(FMODE_READ);
672 	if (!error)
673 		hibernation_restore(flags & SF_PLATFORM_MODE);
674 
675 	pr_err("Failed to load hibernation image, recovering.\n");
676 	swsusp_free();
677 	free_basic_memory_bitmaps();
678  Unlock:
679 	unlock_device_hotplug();
680 
681 	return error;
682 }
683 
684 /**
685  * hibernate - Carry out system hibernation, including saving the image.
686  */
687 int hibernate(void)
688 {
689 	int error, nr_calls = 0;
690 	bool snapshot_test = false;
691 
692 	if (!hibernation_available()) {
693 		pm_pr_dbg("Hibernation not available.\n");
694 		return -EPERM;
695 	}
696 
697 	lock_system_sleep();
698 	/* The snapshot device should not be opened while we're running */
699 	if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
700 		error = -EBUSY;
701 		goto Unlock;
702 	}
703 
704 	pr_info("hibernation entry\n");
705 	pm_prepare_console();
706 	error = __pm_notifier_call_chain(PM_HIBERNATION_PREPARE, -1, &nr_calls);
707 	if (error) {
708 		nr_calls--;
709 		goto Exit;
710 	}
711 
712 	pr_info("Syncing filesystems ... \n");
713 	ksys_sync();
714 	pr_info("done.\n");
715 
716 	error = freeze_processes();
717 	if (error)
718 		goto Exit;
719 
720 	lock_device_hotplug();
721 	/* Allocate memory management structures */
722 	error = create_basic_memory_bitmaps();
723 	if (error)
724 		goto Thaw;
725 
726 	error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM);
727 	if (error || freezer_test_done)
728 		goto Free_bitmaps;
729 
730 	if (in_suspend) {
731 		unsigned int flags = 0;
732 
733 		if (hibernation_mode == HIBERNATION_PLATFORM)
734 			flags |= SF_PLATFORM_MODE;
735 		if (nocompress)
736 			flags |= SF_NOCOMPRESS_MODE;
737 		else
738 		        flags |= SF_CRC32_MODE;
739 
740 		pm_pr_dbg("Writing image.\n");
741 		error = swsusp_write(flags);
742 		swsusp_free();
743 		if (!error) {
744 			if (hibernation_mode == HIBERNATION_TEST_RESUME)
745 				snapshot_test = true;
746 			else
747 				power_down();
748 		}
749 		in_suspend = 0;
750 		pm_restore_gfp_mask();
751 	} else {
752 		pm_pr_dbg("Image restored successfully.\n");
753 	}
754 
755  Free_bitmaps:
756 	free_basic_memory_bitmaps();
757  Thaw:
758 	unlock_device_hotplug();
759 	if (snapshot_test) {
760 		pm_pr_dbg("Checking hibernation image\n");
761 		error = swsusp_check();
762 		if (!error)
763 			error = load_image_and_restore();
764 	}
765 	thaw_processes();
766 
767 	/* Don't bother checking whether freezer_test_done is true */
768 	freezer_test_done = false;
769  Exit:
770 	__pm_notifier_call_chain(PM_POST_HIBERNATION, nr_calls, NULL);
771 	pm_restore_console();
772 	atomic_inc(&snapshot_device_available);
773  Unlock:
774 	unlock_system_sleep();
775 	pr_info("hibernation exit\n");
776 
777 	return error;
778 }
779 
780 
781 /**
782  * software_resume - Resume from a saved hibernation image.
783  *
784  * This routine is called as a late initcall, when all devices have been
785  * discovered and initialized already.
786  *
787  * The image reading code is called to see if there is a hibernation image
788  * available for reading.  If that is the case, devices are quiesced and the
789  * contents of memory is restored from the saved image.
790  *
791  * If this is successful, control reappears in the restored target kernel in
792  * hibernation_snapshot() which returns to hibernate().  Otherwise, the routine
793  * attempts to recover gracefully and make the kernel return to the normal mode
794  * of operation.
795  */
796 static int software_resume(void)
797 {
798 	int error, nr_calls = 0;
799 
800 	/*
801 	 * If the user said "noresume".. bail out early.
802 	 */
803 	if (noresume || !hibernation_available())
804 		return 0;
805 
806 	/*
807 	 * name_to_dev_t() below takes a sysfs buffer mutex when sysfs
808 	 * is configured into the kernel. Since the regular hibernate
809 	 * trigger path is via sysfs which takes a buffer mutex before
810 	 * calling hibernate functions (which take system_transition_mutex)
811 	 * this can cause lockdep to complain about a possible ABBA deadlock
812 	 * which cannot happen since we're in the boot code here and
813 	 * sysfs can't be invoked yet. Therefore, we use a subclass
814 	 * here to avoid lockdep complaining.
815 	 */
816 	mutex_lock_nested(&system_transition_mutex, SINGLE_DEPTH_NESTING);
817 
818 	if (swsusp_resume_device)
819 		goto Check_image;
820 
821 	if (!strlen(resume_file)) {
822 		error = -ENOENT;
823 		goto Unlock;
824 	}
825 
826 	pm_pr_dbg("Checking hibernation image partition %s\n", resume_file);
827 
828 	if (resume_delay) {
829 		pr_info("Waiting %dsec before reading resume device ...\n",
830 			resume_delay);
831 		ssleep(resume_delay);
832 	}
833 
834 	/* Check if the device is there */
835 	swsusp_resume_device = name_to_dev_t(resume_file);
836 
837 	/*
838 	 * name_to_dev_t is ineffective to verify parition if resume_file is in
839 	 * integer format. (e.g. major:minor)
840 	 */
841 	if (isdigit(resume_file[0]) && resume_wait) {
842 		int partno;
843 		while (!get_gendisk(swsusp_resume_device, &partno))
844 			msleep(10);
845 	}
846 
847 	if (!swsusp_resume_device) {
848 		/*
849 		 * Some device discovery might still be in progress; we need
850 		 * to wait for this to finish.
851 		 */
852 		wait_for_device_probe();
853 
854 		if (resume_wait) {
855 			while ((swsusp_resume_device = name_to_dev_t(resume_file)) == 0)
856 				msleep(10);
857 			async_synchronize_full();
858 		}
859 
860 		swsusp_resume_device = name_to_dev_t(resume_file);
861 		if (!swsusp_resume_device) {
862 			error = -ENODEV;
863 			goto Unlock;
864 		}
865 	}
866 
867  Check_image:
868 	pm_pr_dbg("Hibernation image partition %d:%d present\n",
869 		MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device));
870 
871 	pm_pr_dbg("Looking for hibernation image.\n");
872 	error = swsusp_check();
873 	if (error)
874 		goto Unlock;
875 
876 	/* The snapshot device should not be opened while we're running */
877 	if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
878 		error = -EBUSY;
879 		swsusp_close(FMODE_READ);
880 		goto Unlock;
881 	}
882 
883 	pr_info("resume from hibernation\n");
884 	pm_prepare_console();
885 	error = __pm_notifier_call_chain(PM_RESTORE_PREPARE, -1, &nr_calls);
886 	if (error) {
887 		nr_calls--;
888 		goto Close_Finish;
889 	}
890 
891 	pm_pr_dbg("Preparing processes for restore.\n");
892 	error = freeze_processes();
893 	if (error)
894 		goto Close_Finish;
895 	error = load_image_and_restore();
896 	thaw_processes();
897  Finish:
898 	__pm_notifier_call_chain(PM_POST_RESTORE, nr_calls, NULL);
899 	pm_restore_console();
900 	pr_info("resume from hibernation failed (%d)\n", error);
901 	atomic_inc(&snapshot_device_available);
902 	/* For success case, the suspend path will release the lock */
903  Unlock:
904 	mutex_unlock(&system_transition_mutex);
905 	pm_pr_dbg("Hibernation image not present or could not be loaded.\n");
906 	return error;
907  Close_Finish:
908 	swsusp_close(FMODE_READ);
909 	goto Finish;
910 }
911 
912 late_initcall_sync(software_resume);
913 
914 
915 static const char * const hibernation_modes[] = {
916 	[HIBERNATION_PLATFORM]	= "platform",
917 	[HIBERNATION_SHUTDOWN]	= "shutdown",
918 	[HIBERNATION_REBOOT]	= "reboot",
919 #ifdef CONFIG_SUSPEND
920 	[HIBERNATION_SUSPEND]	= "suspend",
921 #endif
922 	[HIBERNATION_TEST_RESUME]	= "test_resume",
923 };
924 
925 /*
926  * /sys/power/disk - Control hibernation mode.
927  *
928  * Hibernation can be handled in several ways.  There are a few different ways
929  * to put the system into the sleep state: using the platform driver (e.g. ACPI
930  * or other hibernation_ops), powering it off or rebooting it (for testing
931  * mostly).
932  *
933  * The sysfs file /sys/power/disk provides an interface for selecting the
934  * hibernation mode to use.  Reading from this file causes the available modes
935  * to be printed.  There are 3 modes that can be supported:
936  *
937  *	'platform'
938  *	'shutdown'
939  *	'reboot'
940  *
941  * If a platform hibernation driver is in use, 'platform' will be supported
942  * and will be used by default.  Otherwise, 'shutdown' will be used by default.
943  * The selected option (i.e. the one corresponding to the current value of
944  * hibernation_mode) is enclosed by a square bracket.
945  *
946  * To select a given hibernation mode it is necessary to write the mode's
947  * string representation (as returned by reading from /sys/power/disk) back
948  * into /sys/power/disk.
949  */
950 
951 static ssize_t disk_show(struct kobject *kobj, struct kobj_attribute *attr,
952 			 char *buf)
953 {
954 	int i;
955 	char *start = buf;
956 
957 	if (!hibernation_available())
958 		return sprintf(buf, "[disabled]\n");
959 
960 	for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) {
961 		if (!hibernation_modes[i])
962 			continue;
963 		switch (i) {
964 		case HIBERNATION_SHUTDOWN:
965 		case HIBERNATION_REBOOT:
966 #ifdef CONFIG_SUSPEND
967 		case HIBERNATION_SUSPEND:
968 #endif
969 		case HIBERNATION_TEST_RESUME:
970 			break;
971 		case HIBERNATION_PLATFORM:
972 			if (hibernation_ops)
973 				break;
974 			/* not a valid mode, continue with loop */
975 			continue;
976 		}
977 		if (i == hibernation_mode)
978 			buf += sprintf(buf, "[%s] ", hibernation_modes[i]);
979 		else
980 			buf += sprintf(buf, "%s ", hibernation_modes[i]);
981 	}
982 	buf += sprintf(buf, "\n");
983 	return buf-start;
984 }
985 
986 static ssize_t disk_store(struct kobject *kobj, struct kobj_attribute *attr,
987 			  const char *buf, size_t n)
988 {
989 	int error = 0;
990 	int i;
991 	int len;
992 	char *p;
993 	int mode = HIBERNATION_INVALID;
994 
995 	if (!hibernation_available())
996 		return -EPERM;
997 
998 	p = memchr(buf, '\n', n);
999 	len = p ? p - buf : n;
1000 
1001 	lock_system_sleep();
1002 	for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) {
1003 		if (len == strlen(hibernation_modes[i])
1004 		    && !strncmp(buf, hibernation_modes[i], len)) {
1005 			mode = i;
1006 			break;
1007 		}
1008 	}
1009 	if (mode != HIBERNATION_INVALID) {
1010 		switch (mode) {
1011 		case HIBERNATION_SHUTDOWN:
1012 		case HIBERNATION_REBOOT:
1013 #ifdef CONFIG_SUSPEND
1014 		case HIBERNATION_SUSPEND:
1015 #endif
1016 		case HIBERNATION_TEST_RESUME:
1017 			hibernation_mode = mode;
1018 			break;
1019 		case HIBERNATION_PLATFORM:
1020 			if (hibernation_ops)
1021 				hibernation_mode = mode;
1022 			else
1023 				error = -EINVAL;
1024 		}
1025 	} else
1026 		error = -EINVAL;
1027 
1028 	if (!error)
1029 		pm_pr_dbg("Hibernation mode set to '%s'\n",
1030 			       hibernation_modes[mode]);
1031 	unlock_system_sleep();
1032 	return error ? error : n;
1033 }
1034 
1035 power_attr(disk);
1036 
1037 static ssize_t resume_show(struct kobject *kobj, struct kobj_attribute *attr,
1038 			   char *buf)
1039 {
1040 	return sprintf(buf,"%d:%d\n", MAJOR(swsusp_resume_device),
1041 		       MINOR(swsusp_resume_device));
1042 }
1043 
1044 static ssize_t resume_store(struct kobject *kobj, struct kobj_attribute *attr,
1045 			    const char *buf, size_t n)
1046 {
1047 	dev_t res;
1048 	int len = n;
1049 	char *name;
1050 
1051 	if (len && buf[len-1] == '\n')
1052 		len--;
1053 	name = kstrndup(buf, len, GFP_KERNEL);
1054 	if (!name)
1055 		return -ENOMEM;
1056 
1057 	res = name_to_dev_t(name);
1058 	kfree(name);
1059 	if (!res)
1060 		return -EINVAL;
1061 
1062 	lock_system_sleep();
1063 	swsusp_resume_device = res;
1064 	unlock_system_sleep();
1065 	pm_pr_dbg("Configured resume from disk to %u\n", swsusp_resume_device);
1066 	noresume = 0;
1067 	software_resume();
1068 	return n;
1069 }
1070 
1071 power_attr(resume);
1072 
1073 static ssize_t resume_offset_show(struct kobject *kobj,
1074 				  struct kobj_attribute *attr, char *buf)
1075 {
1076 	return sprintf(buf, "%llu\n", (unsigned long long)swsusp_resume_block);
1077 }
1078 
1079 static ssize_t resume_offset_store(struct kobject *kobj,
1080 				   struct kobj_attribute *attr, const char *buf,
1081 				   size_t n)
1082 {
1083 	unsigned long long offset;
1084 	int rc;
1085 
1086 	rc = kstrtoull(buf, 0, &offset);
1087 	if (rc)
1088 		return rc;
1089 	swsusp_resume_block = offset;
1090 
1091 	return n;
1092 }
1093 
1094 power_attr(resume_offset);
1095 
1096 static ssize_t image_size_show(struct kobject *kobj, struct kobj_attribute *attr,
1097 			       char *buf)
1098 {
1099 	return sprintf(buf, "%lu\n", image_size);
1100 }
1101 
1102 static ssize_t image_size_store(struct kobject *kobj, struct kobj_attribute *attr,
1103 				const char *buf, size_t n)
1104 {
1105 	unsigned long size;
1106 
1107 	if (sscanf(buf, "%lu", &size) == 1) {
1108 		image_size = size;
1109 		return n;
1110 	}
1111 
1112 	return -EINVAL;
1113 }
1114 
1115 power_attr(image_size);
1116 
1117 static ssize_t reserved_size_show(struct kobject *kobj,
1118 				  struct kobj_attribute *attr, char *buf)
1119 {
1120 	return sprintf(buf, "%lu\n", reserved_size);
1121 }
1122 
1123 static ssize_t reserved_size_store(struct kobject *kobj,
1124 				   struct kobj_attribute *attr,
1125 				   const char *buf, size_t n)
1126 {
1127 	unsigned long size;
1128 
1129 	if (sscanf(buf, "%lu", &size) == 1) {
1130 		reserved_size = size;
1131 		return n;
1132 	}
1133 
1134 	return -EINVAL;
1135 }
1136 
1137 power_attr(reserved_size);
1138 
1139 static struct attribute * g[] = {
1140 	&disk_attr.attr,
1141 	&resume_offset_attr.attr,
1142 	&resume_attr.attr,
1143 	&image_size_attr.attr,
1144 	&reserved_size_attr.attr,
1145 	NULL,
1146 };
1147 
1148 
1149 static const struct attribute_group attr_group = {
1150 	.attrs = g,
1151 };
1152 
1153 
1154 static int __init pm_disk_init(void)
1155 {
1156 	return sysfs_create_group(power_kobj, &attr_group);
1157 }
1158 
1159 core_initcall(pm_disk_init);
1160 
1161 
1162 static int __init resume_setup(char *str)
1163 {
1164 	if (noresume)
1165 		return 1;
1166 
1167 	strncpy( resume_file, str, 255 );
1168 	return 1;
1169 }
1170 
1171 static int __init resume_offset_setup(char *str)
1172 {
1173 	unsigned long long offset;
1174 
1175 	if (noresume)
1176 		return 1;
1177 
1178 	if (sscanf(str, "%llu", &offset) == 1)
1179 		swsusp_resume_block = offset;
1180 
1181 	return 1;
1182 }
1183 
1184 static int __init hibernate_setup(char *str)
1185 {
1186 	if (!strncmp(str, "noresume", 8)) {
1187 		noresume = 1;
1188 	} else if (!strncmp(str, "nocompress", 10)) {
1189 		nocompress = 1;
1190 	} else if (!strncmp(str, "no", 2)) {
1191 		noresume = 1;
1192 		nohibernate = 1;
1193 	} else if (IS_ENABLED(CONFIG_STRICT_KERNEL_RWX)
1194 		   && !strncmp(str, "protect_image", 13)) {
1195 		enable_restore_image_protection();
1196 	}
1197 	return 1;
1198 }
1199 
1200 static int __init noresume_setup(char *str)
1201 {
1202 	noresume = 1;
1203 	return 1;
1204 }
1205 
1206 static int __init resumewait_setup(char *str)
1207 {
1208 	resume_wait = 1;
1209 	return 1;
1210 }
1211 
1212 static int __init resumedelay_setup(char *str)
1213 {
1214 	int rc = kstrtouint(str, 0, &resume_delay);
1215 
1216 	if (rc)
1217 		return rc;
1218 	return 1;
1219 }
1220 
1221 static int __init nohibernate_setup(char *str)
1222 {
1223 	noresume = 1;
1224 	nohibernate = 1;
1225 	return 1;
1226 }
1227 
1228 __setup("noresume", noresume_setup);
1229 __setup("resume_offset=", resume_offset_setup);
1230 __setup("resume=", resume_setup);
1231 __setup("hibernate=", hibernate_setup);
1232 __setup("resumewait", resumewait_setup);
1233 __setup("resumedelay=", resumedelay_setup);
1234 __setup("nohibernate", nohibernate_setup);
1235