1config SUSPEND 2 bool "Suspend to RAM and standby" 3 depends on ARCH_SUSPEND_POSSIBLE 4 default y 5 ---help--- 6 Allow the system to enter sleep states in which main memory is 7 powered and thus its contents are preserved, such as the 8 suspend-to-RAM state (e.g. the ACPI S3 state). 9 10config SUSPEND_FREEZER 11 bool "Enable freezer for suspend to RAM/standby" \ 12 if ARCH_WANTS_FREEZER_CONTROL || BROKEN 13 depends on SUSPEND 14 default y 15 help 16 This allows you to turn off the freezer for suspend. If this is 17 done, no tasks are frozen for suspend to RAM/standby. 18 19 Turning OFF this setting is NOT recommended! If in doubt, say Y. 20 21config HIBERNATE_CALLBACKS 22 bool 23 24config HIBERNATION 25 bool "Hibernation (aka 'suspend to disk')" 26 depends on SWAP && ARCH_HIBERNATION_POSSIBLE 27 select HIBERNATE_CALLBACKS 28 select LZO_COMPRESS 29 select LZO_DECOMPRESS 30 select CRC32 31 ---help--- 32 Enable the suspend to disk (STD) functionality, which is usually 33 called "hibernation" in user interfaces. STD checkpoints the 34 system and powers it off; and restores that checkpoint on reboot. 35 36 You can suspend your machine with 'echo disk > /sys/power/state' 37 after placing resume=/dev/swappartition on the kernel command line 38 in your bootloader's configuration file. 39 40 Alternatively, you can use the additional userland tools available 41 from <http://suspend.sf.net>. 42 43 In principle it does not require ACPI or APM, although for example 44 ACPI will be used for the final steps when it is available. One 45 of the reasons to use software suspend is that the firmware hooks 46 for suspend states like suspend-to-RAM (STR) often don't work very 47 well with Linux. 48 49 It creates an image which is saved in your active swap. Upon the next 50 boot, pass the 'resume=/dev/swappartition' argument to the kernel to 51 have it detect the saved image, restore memory state from it, and 52 continue to run as before. If you do not want the previous state to 53 be reloaded, then use the 'noresume' kernel command line argument. 54 Note, however, that fsck will be run on your filesystems and you will 55 need to run mkswap against the swap partition used for the suspend. 56 57 It also works with swap files to a limited extent (for details see 58 <file:Documentation/power/swsusp-and-swap-files.txt>). 59 60 Right now you may boot without resuming and resume later but in the 61 meantime you cannot use the swap partition(s)/file(s) involved in 62 suspending. Also in this case you must not use the filesystems 63 that were mounted before the suspend. In particular, you MUST NOT 64 MOUNT any journaled filesystems mounted before the suspend or they 65 will get corrupted in a nasty way. 66 67 For more information take a look at <file:Documentation/power/swsusp.txt>. 68 69config ARCH_SAVE_PAGE_KEYS 70 bool 71 72config PM_STD_PARTITION 73 string "Default resume partition" 74 depends on HIBERNATION 75 default "" 76 ---help--- 77 The default resume partition is the partition that the suspend- 78 to-disk implementation will look for a suspended disk image. 79 80 The partition specified here will be different for almost every user. 81 It should be a valid swap partition (at least for now) that is turned 82 on before suspending. 83 84 The partition specified can be overridden by specifying: 85 86 resume=/dev/<other device> 87 88 which will set the resume partition to the device specified. 89 90 Note there is currently not a way to specify which device to save the 91 suspended image to. It will simply pick the first available swap 92 device. 93 94config PM_SLEEP 95 def_bool y 96 depends on SUSPEND || HIBERNATE_CALLBACKS 97 98config PM_SLEEP_SMP 99 def_bool y 100 depends on SMP 101 depends on ARCH_SUSPEND_POSSIBLE || ARCH_HIBERNATION_POSSIBLE 102 depends on PM_SLEEP 103 select HOTPLUG 104 select HOTPLUG_CPU 105 106config PM_AUTOSLEEP 107 bool "Opportunistic sleep" 108 depends on PM_SLEEP 109 default n 110 ---help--- 111 Allow the kernel to trigger a system transition into a global sleep 112 state automatically whenever there are no active wakeup sources. 113 114config PM_WAKELOCKS 115 bool "User space wakeup sources interface" 116 depends on PM_SLEEP 117 default n 118 ---help--- 119 Allow user space to create, activate and deactivate wakeup source 120 objects with the help of a sysfs-based interface. 121 122config PM_WAKELOCKS_LIMIT 123 int "Maximum number of user space wakeup sources (0 = no limit)" 124 range 0 100000 125 default 100 126 depends on PM_WAKELOCKS 127 128config PM_WAKELOCKS_GC 129 bool "Garbage collector for user space wakeup sources" 130 depends on PM_WAKELOCKS 131 default y 132 133config PM_RUNTIME 134 bool "Run-time PM core functionality" 135 depends on !IA64_HP_SIM 136 ---help--- 137 Enable functionality allowing I/O devices to be put into energy-saving 138 (low power) states at run time (or autosuspended) after a specified 139 period of inactivity and woken up in response to a hardware-generated 140 wake-up event or a driver's request. 141 142 Hardware support is generally required for this functionality to work 143 and the bus type drivers of the buses the devices are on are 144 responsible for the actual handling of the autosuspend requests and 145 wake-up events. 146 147config PM 148 def_bool y 149 depends on PM_SLEEP || PM_RUNTIME 150 151config PM_DEBUG 152 bool "Power Management Debug Support" 153 depends on PM 154 ---help--- 155 This option enables various debugging support in the Power Management 156 code. This is helpful when debugging and reporting PM bugs, like 157 suspend support. 158 159config PM_ADVANCED_DEBUG 160 bool "Extra PM attributes in sysfs for low-level debugging/testing" 161 depends on PM_DEBUG 162 ---help--- 163 Add extra sysfs attributes allowing one to access some Power Management 164 fields of device objects from user space. If you are not a kernel 165 developer interested in debugging/testing Power Management, say "no". 166 167config PM_TEST_SUSPEND 168 bool "Test suspend/resume and wakealarm during bootup" 169 depends on SUSPEND && PM_DEBUG && RTC_CLASS=y 170 ---help--- 171 This option will let you suspend your machine during bootup, and 172 make it wake up a few seconds later using an RTC wakeup alarm. 173 Enable this with a kernel parameter like "test_suspend=mem". 174 175 You probably want to have your system's RTC driver statically 176 linked, ensuring that it's available when this test runs. 177 178config PM_SLEEP_DEBUG 179 def_bool y 180 depends on PM_DEBUG && PM_SLEEP 181 182config PM_TRACE 183 bool 184 help 185 This enables code to save the last PM event point across 186 reboot. The architecture needs to support this, x86 for 187 example does by saving things in the RTC, see below. 188 189 The architecture specific code must provide the extern 190 functions from <linux/resume-trace.h> as well as the 191 <asm/resume-trace.h> header with a TRACE_RESUME() macro. 192 193 The way the information is presented is architecture- 194 dependent, x86 will print the information during a 195 late_initcall. 196 197config PM_TRACE_RTC 198 bool "Suspend/resume event tracing" 199 depends on PM_SLEEP_DEBUG 200 depends on X86 201 select PM_TRACE 202 ---help--- 203 This enables some cheesy code to save the last PM event point in the 204 RTC across reboots, so that you can debug a machine that just hangs 205 during suspend (or more commonly, during resume). 206 207 To use this debugging feature you should attempt to suspend the 208 machine, reboot it and then run 209 210 dmesg -s 1000000 | grep 'hash matches' 211 212 CAUTION: this option will cause your machine's real-time clock to be 213 set to an invalid time after a resume. 214 215config APM_EMULATION 216 tristate "Advanced Power Management Emulation" 217 depends on PM && SYS_SUPPORTS_APM_EMULATION 218 help 219 APM is a BIOS specification for saving power using several different 220 techniques. This is mostly useful for battery powered laptops with 221 APM compliant BIOSes. If you say Y here, the system time will be 222 reset after a RESUME operation, the /proc/apm device will provide 223 battery status information, and user-space programs will receive 224 notification of APM "events" (e.g. battery status change). 225 226 In order to use APM, you will need supporting software. For location 227 and more information, read <file:Documentation/power/apm-acpi.txt> 228 and the Battery Powered Linux mini-HOWTO, available from 229 <http://www.tldp.org/docs.html#howto>. 230 231 This driver does not spin down disk drives (see the hdparm(8) 232 manpage ("man 8 hdparm") for that), and it doesn't turn off 233 VESA-compliant "green" monitors. 234 235 Generally, if you don't have a battery in your machine, there isn't 236 much point in using this driver and you should say N. If you get 237 random kernel OOPSes or reboots that don't seem to be related to 238 anything, try disabling/enabling this option (or disabling/enabling 239 APM in your BIOS). 240 241config ARCH_HAS_OPP 242 bool 243 244config PM_OPP 245 bool "Operating Performance Point (OPP) Layer library" 246 depends on ARCH_HAS_OPP 247 ---help--- 248 SOCs have a standard set of tuples consisting of frequency and 249 voltage pairs that the device will support per voltage domain. This 250 is called Operating Performance Point or OPP. The actual definitions 251 of OPP varies over silicon within the same family of devices. 252 253 OPP layer organizes the data internally using device pointers 254 representing individual voltage domains and provides SOC 255 implementations a ready to use framework to manage OPPs. 256 For more information, read <file:Documentation/power/opp.txt> 257 258config PM_CLK 259 def_bool y 260 depends on PM && HAVE_CLK 261 262config PM_GENERIC_DOMAINS 263 bool 264 depends on PM 265 266config PM_GENERIC_DOMAINS_SLEEP 267 def_bool y 268 depends on PM_SLEEP && PM_GENERIC_DOMAINS 269 270config PM_GENERIC_DOMAINS_RUNTIME 271 def_bool y 272 depends on PM_RUNTIME && PM_GENERIC_DOMAINS 273 274config CPU_PM 275 bool 276 depends on SUSPEND || CPU_IDLE 277