1 /* CPU control. 2 * (C) 2001, 2002, 2003, 2004 Rusty Russell 3 * 4 * This code is licenced under the GPL. 5 */ 6 #include <linux/sched/mm.h> 7 #include <linux/proc_fs.h> 8 #include <linux/smp.h> 9 #include <linux/init.h> 10 #include <linux/notifier.h> 11 #include <linux/sched/signal.h> 12 #include <linux/sched/hotplug.h> 13 #include <linux/sched/isolation.h> 14 #include <linux/sched/task.h> 15 #include <linux/sched/smt.h> 16 #include <linux/unistd.h> 17 #include <linux/cpu.h> 18 #include <linux/oom.h> 19 #include <linux/rcupdate.h> 20 #include <linux/delay.h> 21 #include <linux/export.h> 22 #include <linux/bug.h> 23 #include <linux/kthread.h> 24 #include <linux/stop_machine.h> 25 #include <linux/mutex.h> 26 #include <linux/gfp.h> 27 #include <linux/suspend.h> 28 #include <linux/lockdep.h> 29 #include <linux/tick.h> 30 #include <linux/irq.h> 31 #include <linux/nmi.h> 32 #include <linux/smpboot.h> 33 #include <linux/relay.h> 34 #include <linux/slab.h> 35 #include <linux/scs.h> 36 #include <linux/percpu-rwsem.h> 37 #include <linux/cpuset.h> 38 #include <linux/random.h> 39 #include <linux/cc_platform.h> 40 41 #include <trace/events/power.h> 42 #define CREATE_TRACE_POINTS 43 #include <trace/events/cpuhp.h> 44 45 #include "smpboot.h" 46 47 /** 48 * struct cpuhp_cpu_state - Per cpu hotplug state storage 49 * @state: The current cpu state 50 * @target: The target state 51 * @fail: Current CPU hotplug callback state 52 * @thread: Pointer to the hotplug thread 53 * @should_run: Thread should execute 54 * @rollback: Perform a rollback 55 * @single: Single callback invocation 56 * @bringup: Single callback bringup or teardown selector 57 * @node: Remote CPU node; for multi-instance, do a 58 * single entry callback for install/remove 59 * @last: For multi-instance rollback, remember how far we got 60 * @cb_state: The state for a single callback (install/uninstall) 61 * @result: Result of the operation 62 * @ap_sync_state: State for AP synchronization 63 * @done_up: Signal completion to the issuer of the task for cpu-up 64 * @done_down: Signal completion to the issuer of the task for cpu-down 65 */ 66 struct cpuhp_cpu_state { 67 enum cpuhp_state state; 68 enum cpuhp_state target; 69 enum cpuhp_state fail; 70 #ifdef CONFIG_SMP 71 struct task_struct *thread; 72 bool should_run; 73 bool rollback; 74 bool single; 75 bool bringup; 76 struct hlist_node *node; 77 struct hlist_node *last; 78 enum cpuhp_state cb_state; 79 int result; 80 atomic_t ap_sync_state; 81 struct completion done_up; 82 struct completion done_down; 83 #endif 84 }; 85 86 static DEFINE_PER_CPU(struct cpuhp_cpu_state, cpuhp_state) = { 87 .fail = CPUHP_INVALID, 88 }; 89 90 #ifdef CONFIG_SMP 91 cpumask_t cpus_booted_once_mask; 92 #endif 93 94 #if defined(CONFIG_LOCKDEP) && defined(CONFIG_SMP) 95 static struct lockdep_map cpuhp_state_up_map = 96 STATIC_LOCKDEP_MAP_INIT("cpuhp_state-up", &cpuhp_state_up_map); 97 static struct lockdep_map cpuhp_state_down_map = 98 STATIC_LOCKDEP_MAP_INIT("cpuhp_state-down", &cpuhp_state_down_map); 99 100 101 static inline void cpuhp_lock_acquire(bool bringup) 102 { 103 lock_map_acquire(bringup ? &cpuhp_state_up_map : &cpuhp_state_down_map); 104 } 105 106 static inline void cpuhp_lock_release(bool bringup) 107 { 108 lock_map_release(bringup ? &cpuhp_state_up_map : &cpuhp_state_down_map); 109 } 110 #else 111 112 static inline void cpuhp_lock_acquire(bool bringup) { } 113 static inline void cpuhp_lock_release(bool bringup) { } 114 115 #endif 116 117 /** 118 * struct cpuhp_step - Hotplug state machine step 119 * @name: Name of the step 120 * @startup: Startup function of the step 121 * @teardown: Teardown function of the step 122 * @cant_stop: Bringup/teardown can't be stopped at this step 123 * @multi_instance: State has multiple instances which get added afterwards 124 */ 125 struct cpuhp_step { 126 const char *name; 127 union { 128 int (*single)(unsigned int cpu); 129 int (*multi)(unsigned int cpu, 130 struct hlist_node *node); 131 } startup; 132 union { 133 int (*single)(unsigned int cpu); 134 int (*multi)(unsigned int cpu, 135 struct hlist_node *node); 136 } teardown; 137 /* private: */ 138 struct hlist_head list; 139 /* public: */ 140 bool cant_stop; 141 bool multi_instance; 142 }; 143 144 static DEFINE_MUTEX(cpuhp_state_mutex); 145 static struct cpuhp_step cpuhp_hp_states[]; 146 147 static struct cpuhp_step *cpuhp_get_step(enum cpuhp_state state) 148 { 149 return cpuhp_hp_states + state; 150 } 151 152 static bool cpuhp_step_empty(bool bringup, struct cpuhp_step *step) 153 { 154 return bringup ? !step->startup.single : !step->teardown.single; 155 } 156 157 /** 158 * cpuhp_invoke_callback - Invoke the callbacks for a given state 159 * @cpu: The cpu for which the callback should be invoked 160 * @state: The state to do callbacks for 161 * @bringup: True if the bringup callback should be invoked 162 * @node: For multi-instance, do a single entry callback for install/remove 163 * @lastp: For multi-instance rollback, remember how far we got 164 * 165 * Called from cpu hotplug and from the state register machinery. 166 * 167 * Return: %0 on success or a negative errno code 168 */ 169 static int cpuhp_invoke_callback(unsigned int cpu, enum cpuhp_state state, 170 bool bringup, struct hlist_node *node, 171 struct hlist_node **lastp) 172 { 173 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); 174 struct cpuhp_step *step = cpuhp_get_step(state); 175 int (*cbm)(unsigned int cpu, struct hlist_node *node); 176 int (*cb)(unsigned int cpu); 177 int ret, cnt; 178 179 if (st->fail == state) { 180 st->fail = CPUHP_INVALID; 181 return -EAGAIN; 182 } 183 184 if (cpuhp_step_empty(bringup, step)) { 185 WARN_ON_ONCE(1); 186 return 0; 187 } 188 189 if (!step->multi_instance) { 190 WARN_ON_ONCE(lastp && *lastp); 191 cb = bringup ? step->startup.single : step->teardown.single; 192 193 trace_cpuhp_enter(cpu, st->target, state, cb); 194 ret = cb(cpu); 195 trace_cpuhp_exit(cpu, st->state, state, ret); 196 return ret; 197 } 198 cbm = bringup ? step->startup.multi : step->teardown.multi; 199 200 /* Single invocation for instance add/remove */ 201 if (node) { 202 WARN_ON_ONCE(lastp && *lastp); 203 trace_cpuhp_multi_enter(cpu, st->target, state, cbm, node); 204 ret = cbm(cpu, node); 205 trace_cpuhp_exit(cpu, st->state, state, ret); 206 return ret; 207 } 208 209 /* State transition. Invoke on all instances */ 210 cnt = 0; 211 hlist_for_each(node, &step->list) { 212 if (lastp && node == *lastp) 213 break; 214 215 trace_cpuhp_multi_enter(cpu, st->target, state, cbm, node); 216 ret = cbm(cpu, node); 217 trace_cpuhp_exit(cpu, st->state, state, ret); 218 if (ret) { 219 if (!lastp) 220 goto err; 221 222 *lastp = node; 223 return ret; 224 } 225 cnt++; 226 } 227 if (lastp) 228 *lastp = NULL; 229 return 0; 230 err: 231 /* Rollback the instances if one failed */ 232 cbm = !bringup ? step->startup.multi : step->teardown.multi; 233 if (!cbm) 234 return ret; 235 236 hlist_for_each(node, &step->list) { 237 if (!cnt--) 238 break; 239 240 trace_cpuhp_multi_enter(cpu, st->target, state, cbm, node); 241 ret = cbm(cpu, node); 242 trace_cpuhp_exit(cpu, st->state, state, ret); 243 /* 244 * Rollback must not fail, 245 */ 246 WARN_ON_ONCE(ret); 247 } 248 return ret; 249 } 250 251 #ifdef CONFIG_SMP 252 static bool cpuhp_is_ap_state(enum cpuhp_state state) 253 { 254 /* 255 * The extra check for CPUHP_TEARDOWN_CPU is only for documentation 256 * purposes as that state is handled explicitly in cpu_down. 257 */ 258 return state > CPUHP_BRINGUP_CPU && state != CPUHP_TEARDOWN_CPU; 259 } 260 261 static inline void wait_for_ap_thread(struct cpuhp_cpu_state *st, bool bringup) 262 { 263 struct completion *done = bringup ? &st->done_up : &st->done_down; 264 wait_for_completion(done); 265 } 266 267 static inline void complete_ap_thread(struct cpuhp_cpu_state *st, bool bringup) 268 { 269 struct completion *done = bringup ? &st->done_up : &st->done_down; 270 complete(done); 271 } 272 273 /* 274 * The former STARTING/DYING states, ran with IRQs disabled and must not fail. 275 */ 276 static bool cpuhp_is_atomic_state(enum cpuhp_state state) 277 { 278 return CPUHP_AP_IDLE_DEAD <= state && state < CPUHP_AP_ONLINE; 279 } 280 281 /* Synchronization state management */ 282 enum cpuhp_sync_state { 283 SYNC_STATE_DEAD, 284 SYNC_STATE_KICKED, 285 SYNC_STATE_SHOULD_DIE, 286 SYNC_STATE_ALIVE, 287 SYNC_STATE_SHOULD_ONLINE, 288 SYNC_STATE_ONLINE, 289 }; 290 291 #ifdef CONFIG_HOTPLUG_CORE_SYNC 292 /** 293 * cpuhp_ap_update_sync_state - Update synchronization state during bringup/teardown 294 * @state: The synchronization state to set 295 * 296 * No synchronization point. Just update of the synchronization state, but implies 297 * a full barrier so that the AP changes are visible before the control CPU proceeds. 298 */ 299 static inline void cpuhp_ap_update_sync_state(enum cpuhp_sync_state state) 300 { 301 atomic_t *st = this_cpu_ptr(&cpuhp_state.ap_sync_state); 302 303 (void)atomic_xchg(st, state); 304 } 305 306 void __weak arch_cpuhp_sync_state_poll(void) { cpu_relax(); } 307 308 static bool cpuhp_wait_for_sync_state(unsigned int cpu, enum cpuhp_sync_state state, 309 enum cpuhp_sync_state next_state) 310 { 311 atomic_t *st = per_cpu_ptr(&cpuhp_state.ap_sync_state, cpu); 312 ktime_t now, end, start = ktime_get(); 313 int sync; 314 315 end = start + 10ULL * NSEC_PER_SEC; 316 317 sync = atomic_read(st); 318 while (1) { 319 if (sync == state) { 320 if (!atomic_try_cmpxchg(st, &sync, next_state)) 321 continue; 322 return true; 323 } 324 325 now = ktime_get(); 326 if (now > end) { 327 /* Timeout. Leave the state unchanged */ 328 return false; 329 } else if (now - start < NSEC_PER_MSEC) { 330 /* Poll for one millisecond */ 331 arch_cpuhp_sync_state_poll(); 332 } else { 333 usleep_range(USEC_PER_MSEC, 2 * USEC_PER_MSEC); 334 } 335 sync = atomic_read(st); 336 } 337 return true; 338 } 339 #else /* CONFIG_HOTPLUG_CORE_SYNC */ 340 static inline void cpuhp_ap_update_sync_state(enum cpuhp_sync_state state) { } 341 #endif /* !CONFIG_HOTPLUG_CORE_SYNC */ 342 343 #ifdef CONFIG_HOTPLUG_CORE_SYNC_DEAD 344 /** 345 * cpuhp_ap_report_dead - Update synchronization state to DEAD 346 * 347 * No synchronization point. Just update of the synchronization state. 348 */ 349 void cpuhp_ap_report_dead(void) 350 { 351 cpuhp_ap_update_sync_state(SYNC_STATE_DEAD); 352 } 353 354 void __weak arch_cpuhp_cleanup_dead_cpu(unsigned int cpu) { } 355 356 /* 357 * Late CPU shutdown synchronization point. Cannot use cpuhp_state::done_down 358 * because the AP cannot issue complete() at this stage. 359 */ 360 static void cpuhp_bp_sync_dead(unsigned int cpu) 361 { 362 atomic_t *st = per_cpu_ptr(&cpuhp_state.ap_sync_state, cpu); 363 int sync = atomic_read(st); 364 365 do { 366 /* CPU can have reported dead already. Don't overwrite that! */ 367 if (sync == SYNC_STATE_DEAD) 368 break; 369 } while (!atomic_try_cmpxchg(st, &sync, SYNC_STATE_SHOULD_DIE)); 370 371 if (cpuhp_wait_for_sync_state(cpu, SYNC_STATE_DEAD, SYNC_STATE_DEAD)) { 372 /* CPU reached dead state. Invoke the cleanup function */ 373 arch_cpuhp_cleanup_dead_cpu(cpu); 374 return; 375 } 376 377 /* No further action possible. Emit message and give up. */ 378 pr_err("CPU%u failed to report dead state\n", cpu); 379 } 380 #else /* CONFIG_HOTPLUG_CORE_SYNC_DEAD */ 381 static inline void cpuhp_bp_sync_dead(unsigned int cpu) { } 382 #endif /* !CONFIG_HOTPLUG_CORE_SYNC_DEAD */ 383 384 #ifdef CONFIG_HOTPLUG_CORE_SYNC_FULL 385 /** 386 * cpuhp_ap_sync_alive - Synchronize AP with the control CPU once it is alive 387 * 388 * Updates the AP synchronization state to SYNC_STATE_ALIVE and waits 389 * for the BP to release it. 390 */ 391 void cpuhp_ap_sync_alive(void) 392 { 393 atomic_t *st = this_cpu_ptr(&cpuhp_state.ap_sync_state); 394 395 cpuhp_ap_update_sync_state(SYNC_STATE_ALIVE); 396 397 /* Wait for the control CPU to release it. */ 398 while (atomic_read(st) != SYNC_STATE_SHOULD_ONLINE) 399 cpu_relax(); 400 } 401 402 static bool cpuhp_can_boot_ap(unsigned int cpu) 403 { 404 atomic_t *st = per_cpu_ptr(&cpuhp_state.ap_sync_state, cpu); 405 int sync = atomic_read(st); 406 407 again: 408 switch (sync) { 409 case SYNC_STATE_DEAD: 410 /* CPU is properly dead */ 411 break; 412 case SYNC_STATE_KICKED: 413 /* CPU did not come up in previous attempt */ 414 break; 415 case SYNC_STATE_ALIVE: 416 /* CPU is stuck cpuhp_ap_sync_alive(). */ 417 break; 418 default: 419 /* CPU failed to report online or dead and is in limbo state. */ 420 return false; 421 } 422 423 /* Prepare for booting */ 424 if (!atomic_try_cmpxchg(st, &sync, SYNC_STATE_KICKED)) 425 goto again; 426 427 return true; 428 } 429 430 void __weak arch_cpuhp_cleanup_kick_cpu(unsigned int cpu) { } 431 432 /* 433 * Early CPU bringup synchronization point. Cannot use cpuhp_state::done_up 434 * because the AP cannot issue complete() so early in the bringup. 435 */ 436 static int cpuhp_bp_sync_alive(unsigned int cpu) 437 { 438 int ret = 0; 439 440 if (!IS_ENABLED(CONFIG_HOTPLUG_CORE_SYNC_FULL)) 441 return 0; 442 443 if (!cpuhp_wait_for_sync_state(cpu, SYNC_STATE_ALIVE, SYNC_STATE_SHOULD_ONLINE)) { 444 pr_err("CPU%u failed to report alive state\n", cpu); 445 ret = -EIO; 446 } 447 448 /* Let the architecture cleanup the kick alive mechanics. */ 449 arch_cpuhp_cleanup_kick_cpu(cpu); 450 return ret; 451 } 452 #else /* CONFIG_HOTPLUG_CORE_SYNC_FULL */ 453 static inline int cpuhp_bp_sync_alive(unsigned int cpu) { return 0; } 454 static inline bool cpuhp_can_boot_ap(unsigned int cpu) { return true; } 455 #endif /* !CONFIG_HOTPLUG_CORE_SYNC_FULL */ 456 457 /* Serializes the updates to cpu_online_mask, cpu_present_mask */ 458 static DEFINE_MUTEX(cpu_add_remove_lock); 459 bool cpuhp_tasks_frozen; 460 EXPORT_SYMBOL_GPL(cpuhp_tasks_frozen); 461 462 /* 463 * The following two APIs (cpu_maps_update_begin/done) must be used when 464 * attempting to serialize the updates to cpu_online_mask & cpu_present_mask. 465 */ 466 void cpu_maps_update_begin(void) 467 { 468 mutex_lock(&cpu_add_remove_lock); 469 } 470 471 void cpu_maps_update_done(void) 472 { 473 mutex_unlock(&cpu_add_remove_lock); 474 } 475 476 /* 477 * If set, cpu_up and cpu_down will return -EBUSY and do nothing. 478 * Should always be manipulated under cpu_add_remove_lock 479 */ 480 static int cpu_hotplug_disabled; 481 482 #ifdef CONFIG_HOTPLUG_CPU 483 484 DEFINE_STATIC_PERCPU_RWSEM(cpu_hotplug_lock); 485 486 static bool cpu_hotplug_offline_disabled __ro_after_init; 487 488 void cpus_read_lock(void) 489 { 490 percpu_down_read(&cpu_hotplug_lock); 491 } 492 EXPORT_SYMBOL_GPL(cpus_read_lock); 493 494 int cpus_read_trylock(void) 495 { 496 return percpu_down_read_trylock(&cpu_hotplug_lock); 497 } 498 EXPORT_SYMBOL_GPL(cpus_read_trylock); 499 500 void cpus_read_unlock(void) 501 { 502 percpu_up_read(&cpu_hotplug_lock); 503 } 504 EXPORT_SYMBOL_GPL(cpus_read_unlock); 505 506 void cpus_write_lock(void) 507 { 508 percpu_down_write(&cpu_hotplug_lock); 509 } 510 511 void cpus_write_unlock(void) 512 { 513 percpu_up_write(&cpu_hotplug_lock); 514 } 515 516 void lockdep_assert_cpus_held(void) 517 { 518 /* 519 * We can't have hotplug operations before userspace starts running, 520 * and some init codepaths will knowingly not take the hotplug lock. 521 * This is all valid, so mute lockdep until it makes sense to report 522 * unheld locks. 523 */ 524 if (system_state < SYSTEM_RUNNING) 525 return; 526 527 percpu_rwsem_assert_held(&cpu_hotplug_lock); 528 } 529 530 #ifdef CONFIG_LOCKDEP 531 int lockdep_is_cpus_held(void) 532 { 533 return percpu_rwsem_is_held(&cpu_hotplug_lock); 534 } 535 #endif 536 537 static void lockdep_acquire_cpus_lock(void) 538 { 539 rwsem_acquire(&cpu_hotplug_lock.dep_map, 0, 0, _THIS_IP_); 540 } 541 542 static void lockdep_release_cpus_lock(void) 543 { 544 rwsem_release(&cpu_hotplug_lock.dep_map, _THIS_IP_); 545 } 546 547 /* Declare CPU offlining not supported */ 548 void cpu_hotplug_disable_offlining(void) 549 { 550 cpu_maps_update_begin(); 551 cpu_hotplug_offline_disabled = true; 552 cpu_maps_update_done(); 553 } 554 555 /* 556 * Wait for currently running CPU hotplug operations to complete (if any) and 557 * disable future CPU hotplug (from sysfs). The 'cpu_add_remove_lock' protects 558 * the 'cpu_hotplug_disabled' flag. The same lock is also acquired by the 559 * hotplug path before performing hotplug operations. So acquiring that lock 560 * guarantees mutual exclusion from any currently running hotplug operations. 561 */ 562 void cpu_hotplug_disable(void) 563 { 564 cpu_maps_update_begin(); 565 cpu_hotplug_disabled++; 566 cpu_maps_update_done(); 567 } 568 EXPORT_SYMBOL_GPL(cpu_hotplug_disable); 569 570 static void __cpu_hotplug_enable(void) 571 { 572 if (WARN_ONCE(!cpu_hotplug_disabled, "Unbalanced cpu hotplug enable\n")) 573 return; 574 cpu_hotplug_disabled--; 575 } 576 577 void cpu_hotplug_enable(void) 578 { 579 cpu_maps_update_begin(); 580 __cpu_hotplug_enable(); 581 cpu_maps_update_done(); 582 } 583 EXPORT_SYMBOL_GPL(cpu_hotplug_enable); 584 585 #else 586 587 static void lockdep_acquire_cpus_lock(void) 588 { 589 } 590 591 static void lockdep_release_cpus_lock(void) 592 { 593 } 594 595 #endif /* CONFIG_HOTPLUG_CPU */ 596 597 /* 598 * Architectures that need SMT-specific errata handling during SMT hotplug 599 * should override this. 600 */ 601 void __weak arch_smt_update(void) { } 602 603 #ifdef CONFIG_HOTPLUG_SMT 604 605 enum cpuhp_smt_control cpu_smt_control __read_mostly = CPU_SMT_ENABLED; 606 static unsigned int cpu_smt_max_threads __ro_after_init; 607 unsigned int cpu_smt_num_threads __read_mostly = UINT_MAX; 608 609 void __init cpu_smt_disable(bool force) 610 { 611 if (!cpu_smt_possible()) 612 return; 613 614 if (force) { 615 pr_info("SMT: Force disabled\n"); 616 cpu_smt_control = CPU_SMT_FORCE_DISABLED; 617 } else { 618 pr_info("SMT: disabled\n"); 619 cpu_smt_control = CPU_SMT_DISABLED; 620 } 621 cpu_smt_num_threads = 1; 622 } 623 624 /* 625 * The decision whether SMT is supported can only be done after the full 626 * CPU identification. Called from architecture code. 627 */ 628 void __init cpu_smt_set_num_threads(unsigned int num_threads, 629 unsigned int max_threads) 630 { 631 WARN_ON(!num_threads || (num_threads > max_threads)); 632 633 if (max_threads == 1) 634 cpu_smt_control = CPU_SMT_NOT_SUPPORTED; 635 636 cpu_smt_max_threads = max_threads; 637 638 /* 639 * If SMT has been disabled via the kernel command line or SMT is 640 * not supported, set cpu_smt_num_threads to 1 for consistency. 641 * If enabled, take the architecture requested number of threads 642 * to bring up into account. 643 */ 644 if (cpu_smt_control != CPU_SMT_ENABLED) 645 cpu_smt_num_threads = 1; 646 else if (num_threads < cpu_smt_num_threads) 647 cpu_smt_num_threads = num_threads; 648 } 649 650 static int __init smt_cmdline_disable(char *str) 651 { 652 cpu_smt_disable(str && !strcmp(str, "force")); 653 return 0; 654 } 655 early_param("nosmt", smt_cmdline_disable); 656 657 /* 658 * For Archicture supporting partial SMT states check if the thread is allowed. 659 * Otherwise this has already been checked through cpu_smt_max_threads when 660 * setting the SMT level. 661 */ 662 static inline bool cpu_smt_thread_allowed(unsigned int cpu) 663 { 664 #ifdef CONFIG_SMT_NUM_THREADS_DYNAMIC 665 return topology_smt_thread_allowed(cpu); 666 #else 667 return true; 668 #endif 669 } 670 671 static inline bool cpu_bootable(unsigned int cpu) 672 { 673 if (cpu_smt_control == CPU_SMT_ENABLED && cpu_smt_thread_allowed(cpu)) 674 return true; 675 676 /* All CPUs are bootable if controls are not configured */ 677 if (cpu_smt_control == CPU_SMT_NOT_IMPLEMENTED) 678 return true; 679 680 /* All CPUs are bootable if CPU is not SMT capable */ 681 if (cpu_smt_control == CPU_SMT_NOT_SUPPORTED) 682 return true; 683 684 if (topology_is_primary_thread(cpu)) 685 return true; 686 687 /* 688 * On x86 it's required to boot all logical CPUs at least once so 689 * that the init code can get a chance to set CR4.MCE on each 690 * CPU. Otherwise, a broadcasted MCE observing CR4.MCE=0b on any 691 * core will shutdown the machine. 692 */ 693 return !cpumask_test_cpu(cpu, &cpus_booted_once_mask); 694 } 695 696 /* Returns true if SMT is supported and not forcefully (irreversibly) disabled */ 697 bool cpu_smt_possible(void) 698 { 699 return cpu_smt_control != CPU_SMT_FORCE_DISABLED && 700 cpu_smt_control != CPU_SMT_NOT_SUPPORTED; 701 } 702 EXPORT_SYMBOL_GPL(cpu_smt_possible); 703 704 #else 705 static inline bool cpu_bootable(unsigned int cpu) { return true; } 706 #endif 707 708 static inline enum cpuhp_state 709 cpuhp_set_state(int cpu, struct cpuhp_cpu_state *st, enum cpuhp_state target) 710 { 711 enum cpuhp_state prev_state = st->state; 712 bool bringup = st->state < target; 713 714 st->rollback = false; 715 st->last = NULL; 716 717 st->target = target; 718 st->single = false; 719 st->bringup = bringup; 720 if (cpu_dying(cpu) != !bringup) 721 set_cpu_dying(cpu, !bringup); 722 723 return prev_state; 724 } 725 726 static inline void 727 cpuhp_reset_state(int cpu, struct cpuhp_cpu_state *st, 728 enum cpuhp_state prev_state) 729 { 730 bool bringup = !st->bringup; 731 732 st->target = prev_state; 733 734 /* 735 * Already rolling back. No need invert the bringup value or to change 736 * the current state. 737 */ 738 if (st->rollback) 739 return; 740 741 st->rollback = true; 742 743 /* 744 * If we have st->last we need to undo partial multi_instance of this 745 * state first. Otherwise start undo at the previous state. 746 */ 747 if (!st->last) { 748 if (st->bringup) 749 st->state--; 750 else 751 st->state++; 752 } 753 754 st->bringup = bringup; 755 if (cpu_dying(cpu) != !bringup) 756 set_cpu_dying(cpu, !bringup); 757 } 758 759 /* Regular hotplug invocation of the AP hotplug thread */ 760 static void __cpuhp_kick_ap(struct cpuhp_cpu_state *st) 761 { 762 if (!st->single && st->state == st->target) 763 return; 764 765 st->result = 0; 766 /* 767 * Make sure the above stores are visible before should_run becomes 768 * true. Paired with the mb() above in cpuhp_thread_fun() 769 */ 770 smp_mb(); 771 st->should_run = true; 772 wake_up_process(st->thread); 773 wait_for_ap_thread(st, st->bringup); 774 } 775 776 static int cpuhp_kick_ap(int cpu, struct cpuhp_cpu_state *st, 777 enum cpuhp_state target) 778 { 779 enum cpuhp_state prev_state; 780 int ret; 781 782 prev_state = cpuhp_set_state(cpu, st, target); 783 __cpuhp_kick_ap(st); 784 if ((ret = st->result)) { 785 cpuhp_reset_state(cpu, st, prev_state); 786 __cpuhp_kick_ap(st); 787 } 788 789 return ret; 790 } 791 792 static int bringup_wait_for_ap_online(unsigned int cpu) 793 { 794 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); 795 796 /* Wait for the CPU to reach CPUHP_AP_ONLINE_IDLE */ 797 wait_for_ap_thread(st, true); 798 if (WARN_ON_ONCE((!cpu_online(cpu)))) 799 return -ECANCELED; 800 801 /* Unpark the hotplug thread of the target cpu */ 802 kthread_unpark(st->thread); 803 804 /* 805 * SMT soft disabling on X86 requires to bring the CPU out of the 806 * BIOS 'wait for SIPI' state in order to set the CR4.MCE bit. The 807 * CPU marked itself as booted_once in notify_cpu_starting() so the 808 * cpu_bootable() check will now return false if this is not the 809 * primary sibling. 810 */ 811 if (!cpu_bootable(cpu)) 812 return -ECANCELED; 813 return 0; 814 } 815 816 #ifdef CONFIG_HOTPLUG_SPLIT_STARTUP 817 static int cpuhp_kick_ap_alive(unsigned int cpu) 818 { 819 if (!cpuhp_can_boot_ap(cpu)) 820 return -EAGAIN; 821 822 return arch_cpuhp_kick_ap_alive(cpu, idle_thread_get(cpu)); 823 } 824 825 static int cpuhp_bringup_ap(unsigned int cpu) 826 { 827 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); 828 int ret; 829 830 /* 831 * Some architectures have to walk the irq descriptors to 832 * setup the vector space for the cpu which comes online. 833 * Prevent irq alloc/free across the bringup. 834 */ 835 irq_lock_sparse(); 836 837 ret = cpuhp_bp_sync_alive(cpu); 838 if (ret) 839 goto out_unlock; 840 841 ret = bringup_wait_for_ap_online(cpu); 842 if (ret) 843 goto out_unlock; 844 845 irq_unlock_sparse(); 846 847 if (st->target <= CPUHP_AP_ONLINE_IDLE) 848 return 0; 849 850 return cpuhp_kick_ap(cpu, st, st->target); 851 852 out_unlock: 853 irq_unlock_sparse(); 854 return ret; 855 } 856 #else 857 static int bringup_cpu(unsigned int cpu) 858 { 859 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); 860 struct task_struct *idle = idle_thread_get(cpu); 861 int ret; 862 863 if (!cpuhp_can_boot_ap(cpu)) 864 return -EAGAIN; 865 866 /* 867 * Some architectures have to walk the irq descriptors to 868 * setup the vector space for the cpu which comes online. 869 * 870 * Prevent irq alloc/free across the bringup by acquiring the 871 * sparse irq lock. Hold it until the upcoming CPU completes the 872 * startup in cpuhp_online_idle() which allows to avoid 873 * intermediate synchronization points in the architecture code. 874 */ 875 irq_lock_sparse(); 876 877 ret = __cpu_up(cpu, idle); 878 if (ret) 879 goto out_unlock; 880 881 ret = cpuhp_bp_sync_alive(cpu); 882 if (ret) 883 goto out_unlock; 884 885 ret = bringup_wait_for_ap_online(cpu); 886 if (ret) 887 goto out_unlock; 888 889 irq_unlock_sparse(); 890 891 if (st->target <= CPUHP_AP_ONLINE_IDLE) 892 return 0; 893 894 return cpuhp_kick_ap(cpu, st, st->target); 895 896 out_unlock: 897 irq_unlock_sparse(); 898 return ret; 899 } 900 #endif 901 902 static int finish_cpu(unsigned int cpu) 903 { 904 struct task_struct *idle = idle_thread_get(cpu); 905 struct mm_struct *mm = idle->active_mm; 906 907 /* 908 * idle_task_exit() will have switched to &init_mm, now 909 * clean up any remaining active_mm state. 910 */ 911 if (mm != &init_mm) 912 idle->active_mm = &init_mm; 913 mmdrop_lazy_tlb(mm); 914 return 0; 915 } 916 917 /* 918 * Hotplug state machine related functions 919 */ 920 921 /* 922 * Get the next state to run. Empty ones will be skipped. Returns true if a 923 * state must be run. 924 * 925 * st->state will be modified ahead of time, to match state_to_run, as if it 926 * has already ran. 927 */ 928 static bool cpuhp_next_state(bool bringup, 929 enum cpuhp_state *state_to_run, 930 struct cpuhp_cpu_state *st, 931 enum cpuhp_state target) 932 { 933 do { 934 if (bringup) { 935 if (st->state >= target) 936 return false; 937 938 *state_to_run = ++st->state; 939 } else { 940 if (st->state <= target) 941 return false; 942 943 *state_to_run = st->state--; 944 } 945 946 if (!cpuhp_step_empty(bringup, cpuhp_get_step(*state_to_run))) 947 break; 948 } while (true); 949 950 return true; 951 } 952 953 static int __cpuhp_invoke_callback_range(bool bringup, 954 unsigned int cpu, 955 struct cpuhp_cpu_state *st, 956 enum cpuhp_state target, 957 bool nofail) 958 { 959 enum cpuhp_state state; 960 int ret = 0; 961 962 while (cpuhp_next_state(bringup, &state, st, target)) { 963 int err; 964 965 err = cpuhp_invoke_callback(cpu, state, bringup, NULL, NULL); 966 if (!err) 967 continue; 968 969 if (nofail) { 970 pr_warn("CPU %u %s state %s (%d) failed (%d)\n", 971 cpu, bringup ? "UP" : "DOWN", 972 cpuhp_get_step(st->state)->name, 973 st->state, err); 974 ret = -1; 975 } else { 976 ret = err; 977 break; 978 } 979 } 980 981 return ret; 982 } 983 984 static inline int cpuhp_invoke_callback_range(bool bringup, 985 unsigned int cpu, 986 struct cpuhp_cpu_state *st, 987 enum cpuhp_state target) 988 { 989 return __cpuhp_invoke_callback_range(bringup, cpu, st, target, false); 990 } 991 992 static inline void cpuhp_invoke_callback_range_nofail(bool bringup, 993 unsigned int cpu, 994 struct cpuhp_cpu_state *st, 995 enum cpuhp_state target) 996 { 997 __cpuhp_invoke_callback_range(bringup, cpu, st, target, true); 998 } 999 1000 static inline bool can_rollback_cpu(struct cpuhp_cpu_state *st) 1001 { 1002 if (IS_ENABLED(CONFIG_HOTPLUG_CPU)) 1003 return true; 1004 /* 1005 * When CPU hotplug is disabled, then taking the CPU down is not 1006 * possible because takedown_cpu() and the architecture and 1007 * subsystem specific mechanisms are not available. So the CPU 1008 * which would be completely unplugged again needs to stay around 1009 * in the current state. 1010 */ 1011 return st->state <= CPUHP_BRINGUP_CPU; 1012 } 1013 1014 static int cpuhp_up_callbacks(unsigned int cpu, struct cpuhp_cpu_state *st, 1015 enum cpuhp_state target) 1016 { 1017 enum cpuhp_state prev_state = st->state; 1018 int ret = 0; 1019 1020 ret = cpuhp_invoke_callback_range(true, cpu, st, target); 1021 if (ret) { 1022 pr_debug("CPU UP failed (%d) CPU %u state %s (%d)\n", 1023 ret, cpu, cpuhp_get_step(st->state)->name, 1024 st->state); 1025 1026 cpuhp_reset_state(cpu, st, prev_state); 1027 if (can_rollback_cpu(st)) 1028 WARN_ON(cpuhp_invoke_callback_range(false, cpu, st, 1029 prev_state)); 1030 } 1031 return ret; 1032 } 1033 1034 /* 1035 * The cpu hotplug threads manage the bringup and teardown of the cpus 1036 */ 1037 static int cpuhp_should_run(unsigned int cpu) 1038 { 1039 struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state); 1040 1041 return st->should_run; 1042 } 1043 1044 /* 1045 * Execute teardown/startup callbacks on the plugged cpu. Also used to invoke 1046 * callbacks when a state gets [un]installed at runtime. 1047 * 1048 * Each invocation of this function by the smpboot thread does a single AP 1049 * state callback. 1050 * 1051 * It has 3 modes of operation: 1052 * - single: runs st->cb_state 1053 * - up: runs ++st->state, while st->state < st->target 1054 * - down: runs st->state--, while st->state > st->target 1055 * 1056 * When complete or on error, should_run is cleared and the completion is fired. 1057 */ 1058 static void cpuhp_thread_fun(unsigned int cpu) 1059 { 1060 struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state); 1061 bool bringup = st->bringup; 1062 enum cpuhp_state state; 1063 1064 if (WARN_ON_ONCE(!st->should_run)) 1065 return; 1066 1067 /* 1068 * ACQUIRE for the cpuhp_should_run() load of ->should_run. Ensures 1069 * that if we see ->should_run we also see the rest of the state. 1070 */ 1071 smp_mb(); 1072 1073 /* 1074 * The BP holds the hotplug lock, but we're now running on the AP, 1075 * ensure that anybody asserting the lock is held, will actually find 1076 * it so. 1077 */ 1078 lockdep_acquire_cpus_lock(); 1079 cpuhp_lock_acquire(bringup); 1080 1081 if (st->single) { 1082 state = st->cb_state; 1083 st->should_run = false; 1084 } else { 1085 st->should_run = cpuhp_next_state(bringup, &state, st, st->target); 1086 if (!st->should_run) 1087 goto end; 1088 } 1089 1090 WARN_ON_ONCE(!cpuhp_is_ap_state(state)); 1091 1092 if (cpuhp_is_atomic_state(state)) { 1093 local_irq_disable(); 1094 st->result = cpuhp_invoke_callback(cpu, state, bringup, st->node, &st->last); 1095 local_irq_enable(); 1096 1097 /* 1098 * STARTING/DYING must not fail! 1099 */ 1100 WARN_ON_ONCE(st->result); 1101 } else { 1102 st->result = cpuhp_invoke_callback(cpu, state, bringup, st->node, &st->last); 1103 } 1104 1105 if (st->result) { 1106 /* 1107 * If we fail on a rollback, we're up a creek without no 1108 * paddle, no way forward, no way back. We loose, thanks for 1109 * playing. 1110 */ 1111 WARN_ON_ONCE(st->rollback); 1112 st->should_run = false; 1113 } 1114 1115 end: 1116 cpuhp_lock_release(bringup); 1117 lockdep_release_cpus_lock(); 1118 1119 if (!st->should_run) 1120 complete_ap_thread(st, bringup); 1121 } 1122 1123 /* Invoke a single callback on a remote cpu */ 1124 static int 1125 cpuhp_invoke_ap_callback(int cpu, enum cpuhp_state state, bool bringup, 1126 struct hlist_node *node) 1127 { 1128 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); 1129 int ret; 1130 1131 if (!cpu_online(cpu)) 1132 return 0; 1133 1134 cpuhp_lock_acquire(false); 1135 cpuhp_lock_release(false); 1136 1137 cpuhp_lock_acquire(true); 1138 cpuhp_lock_release(true); 1139 1140 /* 1141 * If we are up and running, use the hotplug thread. For early calls 1142 * we invoke the thread function directly. 1143 */ 1144 if (!st->thread) 1145 return cpuhp_invoke_callback(cpu, state, bringup, node, NULL); 1146 1147 st->rollback = false; 1148 st->last = NULL; 1149 1150 st->node = node; 1151 st->bringup = bringup; 1152 st->cb_state = state; 1153 st->single = true; 1154 1155 __cpuhp_kick_ap(st); 1156 1157 /* 1158 * If we failed and did a partial, do a rollback. 1159 */ 1160 if ((ret = st->result) && st->last) { 1161 st->rollback = true; 1162 st->bringup = !bringup; 1163 1164 __cpuhp_kick_ap(st); 1165 } 1166 1167 /* 1168 * Clean up the leftovers so the next hotplug operation wont use stale 1169 * data. 1170 */ 1171 st->node = st->last = NULL; 1172 return ret; 1173 } 1174 1175 static int cpuhp_kick_ap_work(unsigned int cpu) 1176 { 1177 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); 1178 enum cpuhp_state prev_state = st->state; 1179 int ret; 1180 1181 cpuhp_lock_acquire(false); 1182 cpuhp_lock_release(false); 1183 1184 cpuhp_lock_acquire(true); 1185 cpuhp_lock_release(true); 1186 1187 trace_cpuhp_enter(cpu, st->target, prev_state, cpuhp_kick_ap_work); 1188 ret = cpuhp_kick_ap(cpu, st, st->target); 1189 trace_cpuhp_exit(cpu, st->state, prev_state, ret); 1190 1191 return ret; 1192 } 1193 1194 static struct smp_hotplug_thread cpuhp_threads = { 1195 .store = &cpuhp_state.thread, 1196 .thread_should_run = cpuhp_should_run, 1197 .thread_fn = cpuhp_thread_fun, 1198 .thread_comm = "cpuhp/%u", 1199 .selfparking = true, 1200 }; 1201 1202 static __init void cpuhp_init_state(void) 1203 { 1204 struct cpuhp_cpu_state *st; 1205 int cpu; 1206 1207 for_each_possible_cpu(cpu) { 1208 st = per_cpu_ptr(&cpuhp_state, cpu); 1209 init_completion(&st->done_up); 1210 init_completion(&st->done_down); 1211 } 1212 } 1213 1214 void __init cpuhp_threads_init(void) 1215 { 1216 cpuhp_init_state(); 1217 BUG_ON(smpboot_register_percpu_thread(&cpuhp_threads)); 1218 kthread_unpark(this_cpu_read(cpuhp_state.thread)); 1219 } 1220 1221 #ifdef CONFIG_HOTPLUG_CPU 1222 #ifndef arch_clear_mm_cpumask_cpu 1223 #define arch_clear_mm_cpumask_cpu(cpu, mm) cpumask_clear_cpu(cpu, mm_cpumask(mm)) 1224 #endif 1225 1226 /** 1227 * clear_tasks_mm_cpumask - Safely clear tasks' mm_cpumask for a CPU 1228 * @cpu: a CPU id 1229 * 1230 * This function walks all processes, finds a valid mm struct for each one and 1231 * then clears a corresponding bit in mm's cpumask. While this all sounds 1232 * trivial, there are various non-obvious corner cases, which this function 1233 * tries to solve in a safe manner. 1234 * 1235 * Also note that the function uses a somewhat relaxed locking scheme, so it may 1236 * be called only for an already offlined CPU. 1237 */ 1238 void clear_tasks_mm_cpumask(int cpu) 1239 { 1240 struct task_struct *p; 1241 1242 /* 1243 * This function is called after the cpu is taken down and marked 1244 * offline, so its not like new tasks will ever get this cpu set in 1245 * their mm mask. -- Peter Zijlstra 1246 * Thus, we may use rcu_read_lock() here, instead of grabbing 1247 * full-fledged tasklist_lock. 1248 */ 1249 WARN_ON(cpu_online(cpu)); 1250 rcu_read_lock(); 1251 for_each_process(p) { 1252 struct task_struct *t; 1253 1254 /* 1255 * Main thread might exit, but other threads may still have 1256 * a valid mm. Find one. 1257 */ 1258 t = find_lock_task_mm(p); 1259 if (!t) 1260 continue; 1261 arch_clear_mm_cpumask_cpu(cpu, t->mm); 1262 task_unlock(t); 1263 } 1264 rcu_read_unlock(); 1265 } 1266 1267 /* Take this CPU down. */ 1268 static int take_cpu_down(void *_param) 1269 { 1270 struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state); 1271 enum cpuhp_state target = max((int)st->target, CPUHP_AP_OFFLINE); 1272 int err, cpu = smp_processor_id(); 1273 1274 /* Ensure this CPU doesn't handle any more interrupts. */ 1275 err = __cpu_disable(); 1276 if (err < 0) 1277 return err; 1278 1279 /* 1280 * Must be called from CPUHP_TEARDOWN_CPU, which means, as we are going 1281 * down, that the current state is CPUHP_TEARDOWN_CPU - 1. 1282 */ 1283 WARN_ON(st->state != (CPUHP_TEARDOWN_CPU - 1)); 1284 1285 /* 1286 * Invoke the former CPU_DYING callbacks. DYING must not fail! 1287 */ 1288 cpuhp_invoke_callback_range_nofail(false, cpu, st, target); 1289 1290 /* Park the stopper thread */ 1291 stop_machine_park(cpu); 1292 return 0; 1293 } 1294 1295 static int takedown_cpu(unsigned int cpu) 1296 { 1297 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); 1298 int err; 1299 1300 /* Park the smpboot threads */ 1301 kthread_park(st->thread); 1302 1303 /* 1304 * Prevent irq alloc/free while the dying cpu reorganizes the 1305 * interrupt affinities. 1306 */ 1307 irq_lock_sparse(); 1308 1309 /* 1310 * So now all preempt/rcu users must observe !cpu_active(). 1311 */ 1312 err = stop_machine_cpuslocked(take_cpu_down, NULL, cpumask_of(cpu)); 1313 if (err) { 1314 /* CPU refused to die */ 1315 irq_unlock_sparse(); 1316 /* Unpark the hotplug thread so we can rollback there */ 1317 kthread_unpark(st->thread); 1318 return err; 1319 } 1320 BUG_ON(cpu_online(cpu)); 1321 1322 /* 1323 * The teardown callback for CPUHP_AP_SCHED_STARTING will have removed 1324 * all runnable tasks from the CPU, there's only the idle task left now 1325 * that the migration thread is done doing the stop_machine thing. 1326 * 1327 * Wait for the stop thread to go away. 1328 */ 1329 wait_for_ap_thread(st, false); 1330 BUG_ON(st->state != CPUHP_AP_IDLE_DEAD); 1331 1332 /* Interrupts are moved away from the dying cpu, reenable alloc/free */ 1333 irq_unlock_sparse(); 1334 1335 hotplug_cpu__broadcast_tick_pull(cpu); 1336 /* This actually kills the CPU. */ 1337 __cpu_die(cpu); 1338 1339 cpuhp_bp_sync_dead(cpu); 1340 1341 tick_cleanup_dead_cpu(cpu); 1342 1343 /* 1344 * Callbacks must be re-integrated right away to the RCU state machine. 1345 * Otherwise an RCU callback could block a further teardown function 1346 * waiting for its completion. 1347 */ 1348 rcutree_migrate_callbacks(cpu); 1349 1350 return 0; 1351 } 1352 1353 static void cpuhp_complete_idle_dead(void *arg) 1354 { 1355 struct cpuhp_cpu_state *st = arg; 1356 1357 complete_ap_thread(st, false); 1358 } 1359 1360 void cpuhp_report_idle_dead(void) 1361 { 1362 struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state); 1363 1364 BUG_ON(st->state != CPUHP_AP_OFFLINE); 1365 tick_assert_timekeeping_handover(); 1366 rcutree_report_cpu_dead(); 1367 st->state = CPUHP_AP_IDLE_DEAD; 1368 /* 1369 * We cannot call complete after rcutree_report_cpu_dead() so we delegate it 1370 * to an online cpu. 1371 */ 1372 smp_call_function_single(cpumask_first(cpu_online_mask), 1373 cpuhp_complete_idle_dead, st, 0); 1374 } 1375 1376 static int cpuhp_down_callbacks(unsigned int cpu, struct cpuhp_cpu_state *st, 1377 enum cpuhp_state target) 1378 { 1379 enum cpuhp_state prev_state = st->state; 1380 int ret = 0; 1381 1382 ret = cpuhp_invoke_callback_range(false, cpu, st, target); 1383 if (ret) { 1384 pr_debug("CPU DOWN failed (%d) CPU %u state %s (%d)\n", 1385 ret, cpu, cpuhp_get_step(st->state)->name, 1386 st->state); 1387 1388 cpuhp_reset_state(cpu, st, prev_state); 1389 1390 if (st->state < prev_state) 1391 WARN_ON(cpuhp_invoke_callback_range(true, cpu, st, 1392 prev_state)); 1393 } 1394 1395 return ret; 1396 } 1397 1398 /* Requires cpu_add_remove_lock to be held */ 1399 static int __ref _cpu_down(unsigned int cpu, int tasks_frozen, 1400 enum cpuhp_state target) 1401 { 1402 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); 1403 int prev_state, ret = 0; 1404 1405 if (num_online_cpus() == 1) 1406 return -EBUSY; 1407 1408 if (!cpu_present(cpu)) 1409 return -EINVAL; 1410 1411 cpus_write_lock(); 1412 1413 cpuhp_tasks_frozen = tasks_frozen; 1414 1415 prev_state = cpuhp_set_state(cpu, st, target); 1416 /* 1417 * If the current CPU state is in the range of the AP hotplug thread, 1418 * then we need to kick the thread. 1419 */ 1420 if (st->state > CPUHP_TEARDOWN_CPU) { 1421 st->target = max((int)target, CPUHP_TEARDOWN_CPU); 1422 ret = cpuhp_kick_ap_work(cpu); 1423 /* 1424 * The AP side has done the error rollback already. Just 1425 * return the error code.. 1426 */ 1427 if (ret) 1428 goto out; 1429 1430 /* 1431 * We might have stopped still in the range of the AP hotplug 1432 * thread. Nothing to do anymore. 1433 */ 1434 if (st->state > CPUHP_TEARDOWN_CPU) 1435 goto out; 1436 1437 st->target = target; 1438 } 1439 /* 1440 * The AP brought itself down to CPUHP_TEARDOWN_CPU. So we need 1441 * to do the further cleanups. 1442 */ 1443 ret = cpuhp_down_callbacks(cpu, st, target); 1444 if (ret && st->state < prev_state) { 1445 if (st->state == CPUHP_TEARDOWN_CPU) { 1446 cpuhp_reset_state(cpu, st, prev_state); 1447 __cpuhp_kick_ap(st); 1448 } else { 1449 WARN(1, "DEAD callback error for CPU%d", cpu); 1450 } 1451 } 1452 1453 out: 1454 cpus_write_unlock(); 1455 /* 1456 * Do post unplug cleanup. This is still protected against 1457 * concurrent CPU hotplug via cpu_add_remove_lock. 1458 */ 1459 lockup_detector_cleanup(); 1460 arch_smt_update(); 1461 return ret; 1462 } 1463 1464 struct cpu_down_work { 1465 unsigned int cpu; 1466 enum cpuhp_state target; 1467 }; 1468 1469 static long __cpu_down_maps_locked(void *arg) 1470 { 1471 struct cpu_down_work *work = arg; 1472 1473 return _cpu_down(work->cpu, 0, work->target); 1474 } 1475 1476 static int cpu_down_maps_locked(unsigned int cpu, enum cpuhp_state target) 1477 { 1478 struct cpu_down_work work = { .cpu = cpu, .target = target, }; 1479 1480 /* 1481 * If the platform does not support hotplug, report it explicitly to 1482 * differentiate it from a transient offlining failure. 1483 */ 1484 if (cpu_hotplug_offline_disabled) 1485 return -EOPNOTSUPP; 1486 if (cpu_hotplug_disabled) 1487 return -EBUSY; 1488 1489 /* 1490 * Ensure that the control task does not run on the to be offlined 1491 * CPU to prevent a deadlock against cfs_b->period_timer. 1492 * Also keep at least one housekeeping cpu onlined to avoid generating 1493 * an empty sched_domain span. 1494 */ 1495 for_each_cpu_and(cpu, cpu_online_mask, housekeeping_cpumask(HK_TYPE_DOMAIN)) { 1496 if (cpu != work.cpu) 1497 return work_on_cpu(cpu, __cpu_down_maps_locked, &work); 1498 } 1499 return -EBUSY; 1500 } 1501 1502 static int cpu_down(unsigned int cpu, enum cpuhp_state target) 1503 { 1504 int err; 1505 1506 cpu_maps_update_begin(); 1507 err = cpu_down_maps_locked(cpu, target); 1508 cpu_maps_update_done(); 1509 return err; 1510 } 1511 1512 /** 1513 * cpu_device_down - Bring down a cpu device 1514 * @dev: Pointer to the cpu device to offline 1515 * 1516 * This function is meant to be used by device core cpu subsystem only. 1517 * 1518 * Other subsystems should use remove_cpu() instead. 1519 * 1520 * Return: %0 on success or a negative errno code 1521 */ 1522 int cpu_device_down(struct device *dev) 1523 { 1524 return cpu_down(dev->id, CPUHP_OFFLINE); 1525 } 1526 1527 int remove_cpu(unsigned int cpu) 1528 { 1529 int ret; 1530 1531 lock_device_hotplug(); 1532 ret = device_offline(get_cpu_device(cpu)); 1533 unlock_device_hotplug(); 1534 1535 return ret; 1536 } 1537 EXPORT_SYMBOL_GPL(remove_cpu); 1538 1539 void smp_shutdown_nonboot_cpus(unsigned int primary_cpu) 1540 { 1541 unsigned int cpu; 1542 int error; 1543 1544 cpu_maps_update_begin(); 1545 1546 /* 1547 * Make certain the cpu I'm about to reboot on is online. 1548 * 1549 * This is inline to what migrate_to_reboot_cpu() already do. 1550 */ 1551 if (!cpu_online(primary_cpu)) 1552 primary_cpu = cpumask_first(cpu_online_mask); 1553 1554 for_each_online_cpu(cpu) { 1555 if (cpu == primary_cpu) 1556 continue; 1557 1558 error = cpu_down_maps_locked(cpu, CPUHP_OFFLINE); 1559 if (error) { 1560 pr_err("Failed to offline CPU%d - error=%d", 1561 cpu, error); 1562 break; 1563 } 1564 } 1565 1566 /* 1567 * Ensure all but the reboot CPU are offline. 1568 */ 1569 BUG_ON(num_online_cpus() > 1); 1570 1571 /* 1572 * Make sure the CPUs won't be enabled by someone else after this 1573 * point. Kexec will reboot to a new kernel shortly resetting 1574 * everything along the way. 1575 */ 1576 cpu_hotplug_disabled++; 1577 1578 cpu_maps_update_done(); 1579 } 1580 1581 #else 1582 #define takedown_cpu NULL 1583 #endif /*CONFIG_HOTPLUG_CPU*/ 1584 1585 /** 1586 * notify_cpu_starting(cpu) - Invoke the callbacks on the starting CPU 1587 * @cpu: cpu that just started 1588 * 1589 * It must be called by the arch code on the new cpu, before the new cpu 1590 * enables interrupts and before the "boot" cpu returns from __cpu_up(). 1591 */ 1592 void notify_cpu_starting(unsigned int cpu) 1593 { 1594 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); 1595 enum cpuhp_state target = min((int)st->target, CPUHP_AP_ONLINE); 1596 1597 rcutree_report_cpu_starting(cpu); /* Enables RCU usage on this CPU. */ 1598 cpumask_set_cpu(cpu, &cpus_booted_once_mask); 1599 1600 /* 1601 * STARTING must not fail! 1602 */ 1603 cpuhp_invoke_callback_range_nofail(true, cpu, st, target); 1604 } 1605 1606 /* 1607 * Called from the idle task. Wake up the controlling task which brings the 1608 * hotplug thread of the upcoming CPU up and then delegates the rest of the 1609 * online bringup to the hotplug thread. 1610 */ 1611 void cpuhp_online_idle(enum cpuhp_state state) 1612 { 1613 struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state); 1614 1615 /* Happens for the boot cpu */ 1616 if (state != CPUHP_AP_ONLINE_IDLE) 1617 return; 1618 1619 cpuhp_ap_update_sync_state(SYNC_STATE_ONLINE); 1620 1621 /* 1622 * Unpark the stopper thread before we start the idle loop (and start 1623 * scheduling); this ensures the stopper task is always available. 1624 */ 1625 stop_machine_unpark(smp_processor_id()); 1626 1627 st->state = CPUHP_AP_ONLINE_IDLE; 1628 complete_ap_thread(st, true); 1629 } 1630 1631 /* Requires cpu_add_remove_lock to be held */ 1632 static int _cpu_up(unsigned int cpu, int tasks_frozen, enum cpuhp_state target) 1633 { 1634 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); 1635 struct task_struct *idle; 1636 int ret = 0; 1637 1638 cpus_write_lock(); 1639 1640 if (!cpu_present(cpu)) { 1641 ret = -EINVAL; 1642 goto out; 1643 } 1644 1645 /* 1646 * The caller of cpu_up() might have raced with another 1647 * caller. Nothing to do. 1648 */ 1649 if (st->state >= target) 1650 goto out; 1651 1652 if (st->state == CPUHP_OFFLINE) { 1653 /* Let it fail before we try to bring the cpu up */ 1654 idle = idle_thread_get(cpu); 1655 if (IS_ERR(idle)) { 1656 ret = PTR_ERR(idle); 1657 goto out; 1658 } 1659 1660 /* 1661 * Reset stale stack state from the last time this CPU was online. 1662 */ 1663 scs_task_reset(idle); 1664 kasan_unpoison_task_stack(idle); 1665 } 1666 1667 cpuhp_tasks_frozen = tasks_frozen; 1668 1669 cpuhp_set_state(cpu, st, target); 1670 /* 1671 * If the current CPU state is in the range of the AP hotplug thread, 1672 * then we need to kick the thread once more. 1673 */ 1674 if (st->state > CPUHP_BRINGUP_CPU) { 1675 ret = cpuhp_kick_ap_work(cpu); 1676 /* 1677 * The AP side has done the error rollback already. Just 1678 * return the error code.. 1679 */ 1680 if (ret) 1681 goto out; 1682 } 1683 1684 /* 1685 * Try to reach the target state. We max out on the BP at 1686 * CPUHP_BRINGUP_CPU. After that the AP hotplug thread is 1687 * responsible for bringing it up to the target state. 1688 */ 1689 target = min((int)target, CPUHP_BRINGUP_CPU); 1690 ret = cpuhp_up_callbacks(cpu, st, target); 1691 out: 1692 cpus_write_unlock(); 1693 arch_smt_update(); 1694 return ret; 1695 } 1696 1697 static int cpu_up(unsigned int cpu, enum cpuhp_state target) 1698 { 1699 int err = 0; 1700 1701 if (!cpu_possible(cpu)) { 1702 pr_err("can't online cpu %d because it is not configured as may-hotadd at boot time\n", 1703 cpu); 1704 return -EINVAL; 1705 } 1706 1707 err = try_online_node(cpu_to_node(cpu)); 1708 if (err) 1709 return err; 1710 1711 cpu_maps_update_begin(); 1712 1713 if (cpu_hotplug_disabled) { 1714 err = -EBUSY; 1715 goto out; 1716 } 1717 if (!cpu_bootable(cpu)) { 1718 err = -EPERM; 1719 goto out; 1720 } 1721 1722 err = _cpu_up(cpu, 0, target); 1723 out: 1724 cpu_maps_update_done(); 1725 return err; 1726 } 1727 1728 /** 1729 * cpu_device_up - Bring up a cpu device 1730 * @dev: Pointer to the cpu device to online 1731 * 1732 * This function is meant to be used by device core cpu subsystem only. 1733 * 1734 * Other subsystems should use add_cpu() instead. 1735 * 1736 * Return: %0 on success or a negative errno code 1737 */ 1738 int cpu_device_up(struct device *dev) 1739 { 1740 return cpu_up(dev->id, CPUHP_ONLINE); 1741 } 1742 1743 int add_cpu(unsigned int cpu) 1744 { 1745 int ret; 1746 1747 lock_device_hotplug(); 1748 ret = device_online(get_cpu_device(cpu)); 1749 unlock_device_hotplug(); 1750 1751 return ret; 1752 } 1753 EXPORT_SYMBOL_GPL(add_cpu); 1754 1755 /** 1756 * bringup_hibernate_cpu - Bring up the CPU that we hibernated on 1757 * @sleep_cpu: The cpu we hibernated on and should be brought up. 1758 * 1759 * On some architectures like arm64, we can hibernate on any CPU, but on 1760 * wake up the CPU we hibernated on might be offline as a side effect of 1761 * using maxcpus= for example. 1762 * 1763 * Return: %0 on success or a negative errno code 1764 */ 1765 int bringup_hibernate_cpu(unsigned int sleep_cpu) 1766 { 1767 int ret; 1768 1769 if (!cpu_online(sleep_cpu)) { 1770 pr_info("Hibernated on a CPU that is offline! Bringing CPU up.\n"); 1771 ret = cpu_up(sleep_cpu, CPUHP_ONLINE); 1772 if (ret) { 1773 pr_err("Failed to bring hibernate-CPU up!\n"); 1774 return ret; 1775 } 1776 } 1777 return 0; 1778 } 1779 1780 static void __init cpuhp_bringup_mask(const struct cpumask *mask, unsigned int ncpus, 1781 enum cpuhp_state target) 1782 { 1783 unsigned int cpu; 1784 1785 for_each_cpu(cpu, mask) { 1786 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); 1787 1788 if (cpu_up(cpu, target) && can_rollback_cpu(st)) { 1789 /* 1790 * If this failed then cpu_up() might have only 1791 * rolled back to CPUHP_BP_KICK_AP for the final 1792 * online. Clean it up. NOOP if already rolled back. 1793 */ 1794 WARN_ON(cpuhp_invoke_callback_range(false, cpu, st, CPUHP_OFFLINE)); 1795 } 1796 1797 if (!--ncpus) 1798 break; 1799 } 1800 } 1801 1802 #ifdef CONFIG_HOTPLUG_PARALLEL 1803 static bool __cpuhp_parallel_bringup __ro_after_init = true; 1804 1805 static int __init parallel_bringup_parse_param(char *arg) 1806 { 1807 return kstrtobool(arg, &__cpuhp_parallel_bringup); 1808 } 1809 early_param("cpuhp.parallel", parallel_bringup_parse_param); 1810 1811 #ifdef CONFIG_HOTPLUG_SMT 1812 static inline bool cpuhp_smt_aware(void) 1813 { 1814 return cpu_smt_max_threads > 1; 1815 } 1816 1817 static inline const struct cpumask *cpuhp_get_primary_thread_mask(void) 1818 { 1819 return cpu_primary_thread_mask; 1820 } 1821 #else 1822 static inline bool cpuhp_smt_aware(void) 1823 { 1824 return false; 1825 } 1826 static inline const struct cpumask *cpuhp_get_primary_thread_mask(void) 1827 { 1828 return cpu_none_mask; 1829 } 1830 #endif 1831 1832 bool __weak arch_cpuhp_init_parallel_bringup(void) 1833 { 1834 return true; 1835 } 1836 1837 /* 1838 * On architectures which have enabled parallel bringup this invokes all BP 1839 * prepare states for each of the to be onlined APs first. The last state 1840 * sends the startup IPI to the APs. The APs proceed through the low level 1841 * bringup code in parallel and then wait for the control CPU to release 1842 * them one by one for the final onlining procedure. 1843 * 1844 * This avoids waiting for each AP to respond to the startup IPI in 1845 * CPUHP_BRINGUP_CPU. 1846 */ 1847 static bool __init cpuhp_bringup_cpus_parallel(unsigned int ncpus) 1848 { 1849 const struct cpumask *mask = cpu_present_mask; 1850 1851 if (__cpuhp_parallel_bringup) 1852 __cpuhp_parallel_bringup = arch_cpuhp_init_parallel_bringup(); 1853 if (!__cpuhp_parallel_bringup) 1854 return false; 1855 1856 if (cpuhp_smt_aware()) { 1857 const struct cpumask *pmask = cpuhp_get_primary_thread_mask(); 1858 static struct cpumask tmp_mask __initdata; 1859 1860 /* 1861 * X86 requires to prevent that SMT siblings stopped while 1862 * the primary thread does a microcode update for various 1863 * reasons. Bring the primary threads up first. 1864 */ 1865 cpumask_and(&tmp_mask, mask, pmask); 1866 cpuhp_bringup_mask(&tmp_mask, ncpus, CPUHP_BP_KICK_AP); 1867 cpuhp_bringup_mask(&tmp_mask, ncpus, CPUHP_ONLINE); 1868 /* Account for the online CPUs */ 1869 ncpus -= num_online_cpus(); 1870 if (!ncpus) 1871 return true; 1872 /* Create the mask for secondary CPUs */ 1873 cpumask_andnot(&tmp_mask, mask, pmask); 1874 mask = &tmp_mask; 1875 } 1876 1877 /* Bring the not-yet started CPUs up */ 1878 cpuhp_bringup_mask(mask, ncpus, CPUHP_BP_KICK_AP); 1879 cpuhp_bringup_mask(mask, ncpus, CPUHP_ONLINE); 1880 return true; 1881 } 1882 #else 1883 static inline bool cpuhp_bringup_cpus_parallel(unsigned int ncpus) { return false; } 1884 #endif /* CONFIG_HOTPLUG_PARALLEL */ 1885 1886 void __init bringup_nonboot_cpus(unsigned int max_cpus) 1887 { 1888 if (!max_cpus) 1889 return; 1890 1891 /* Try parallel bringup optimization if enabled */ 1892 if (cpuhp_bringup_cpus_parallel(max_cpus)) 1893 return; 1894 1895 /* Full per CPU serialized bringup */ 1896 cpuhp_bringup_mask(cpu_present_mask, max_cpus, CPUHP_ONLINE); 1897 } 1898 1899 #ifdef CONFIG_PM_SLEEP_SMP 1900 static cpumask_var_t frozen_cpus; 1901 1902 int freeze_secondary_cpus(int primary) 1903 { 1904 int cpu, error = 0; 1905 1906 cpu_maps_update_begin(); 1907 if (primary == -1) { 1908 primary = cpumask_first(cpu_online_mask); 1909 if (!housekeeping_cpu(primary, HK_TYPE_TIMER)) 1910 primary = housekeeping_any_cpu(HK_TYPE_TIMER); 1911 } else { 1912 if (!cpu_online(primary)) 1913 primary = cpumask_first(cpu_online_mask); 1914 } 1915 1916 /* 1917 * We take down all of the non-boot CPUs in one shot to avoid races 1918 * with the userspace trying to use the CPU hotplug at the same time 1919 */ 1920 cpumask_clear(frozen_cpus); 1921 1922 pr_info("Disabling non-boot CPUs ...\n"); 1923 for (cpu = nr_cpu_ids - 1; cpu >= 0; cpu--) { 1924 if (!cpu_online(cpu) || cpu == primary) 1925 continue; 1926 1927 if (pm_wakeup_pending()) { 1928 pr_info("Wakeup pending. Abort CPU freeze\n"); 1929 error = -EBUSY; 1930 break; 1931 } 1932 1933 trace_suspend_resume(TPS("CPU_OFF"), cpu, true); 1934 error = _cpu_down(cpu, 1, CPUHP_OFFLINE); 1935 trace_suspend_resume(TPS("CPU_OFF"), cpu, false); 1936 if (!error) 1937 cpumask_set_cpu(cpu, frozen_cpus); 1938 else { 1939 pr_err("Error taking CPU%d down: %d\n", cpu, error); 1940 break; 1941 } 1942 } 1943 1944 if (!error) 1945 BUG_ON(num_online_cpus() > 1); 1946 else 1947 pr_err("Non-boot CPUs are not disabled\n"); 1948 1949 /* 1950 * Make sure the CPUs won't be enabled by someone else. We need to do 1951 * this even in case of failure as all freeze_secondary_cpus() users are 1952 * supposed to do thaw_secondary_cpus() on the failure path. 1953 */ 1954 cpu_hotplug_disabled++; 1955 1956 cpu_maps_update_done(); 1957 return error; 1958 } 1959 1960 void __weak arch_thaw_secondary_cpus_begin(void) 1961 { 1962 } 1963 1964 void __weak arch_thaw_secondary_cpus_end(void) 1965 { 1966 } 1967 1968 void thaw_secondary_cpus(void) 1969 { 1970 int cpu, error; 1971 1972 /* Allow everyone to use the CPU hotplug again */ 1973 cpu_maps_update_begin(); 1974 __cpu_hotplug_enable(); 1975 if (cpumask_empty(frozen_cpus)) 1976 goto out; 1977 1978 pr_info("Enabling non-boot CPUs ...\n"); 1979 1980 arch_thaw_secondary_cpus_begin(); 1981 1982 for_each_cpu(cpu, frozen_cpus) { 1983 trace_suspend_resume(TPS("CPU_ON"), cpu, true); 1984 error = _cpu_up(cpu, 1, CPUHP_ONLINE); 1985 trace_suspend_resume(TPS("CPU_ON"), cpu, false); 1986 if (!error) { 1987 pr_info("CPU%d is up\n", cpu); 1988 continue; 1989 } 1990 pr_warn("Error taking CPU%d up: %d\n", cpu, error); 1991 } 1992 1993 arch_thaw_secondary_cpus_end(); 1994 1995 cpumask_clear(frozen_cpus); 1996 out: 1997 cpu_maps_update_done(); 1998 } 1999 2000 static int __init alloc_frozen_cpus(void) 2001 { 2002 if (!alloc_cpumask_var(&frozen_cpus, GFP_KERNEL|__GFP_ZERO)) 2003 return -ENOMEM; 2004 return 0; 2005 } 2006 core_initcall(alloc_frozen_cpus); 2007 2008 /* 2009 * When callbacks for CPU hotplug notifications are being executed, we must 2010 * ensure that the state of the system with respect to the tasks being frozen 2011 * or not, as reported by the notification, remains unchanged *throughout the 2012 * duration* of the execution of the callbacks. 2013 * Hence we need to prevent the freezer from racing with regular CPU hotplug. 2014 * 2015 * This synchronization is implemented by mutually excluding regular CPU 2016 * hotplug and Suspend/Hibernate call paths by hooking onto the Suspend/ 2017 * Hibernate notifications. 2018 */ 2019 static int 2020 cpu_hotplug_pm_callback(struct notifier_block *nb, 2021 unsigned long action, void *ptr) 2022 { 2023 switch (action) { 2024 2025 case PM_SUSPEND_PREPARE: 2026 case PM_HIBERNATION_PREPARE: 2027 cpu_hotplug_disable(); 2028 break; 2029 2030 case PM_POST_SUSPEND: 2031 case PM_POST_HIBERNATION: 2032 cpu_hotplug_enable(); 2033 break; 2034 2035 default: 2036 return NOTIFY_DONE; 2037 } 2038 2039 return NOTIFY_OK; 2040 } 2041 2042 2043 static int __init cpu_hotplug_pm_sync_init(void) 2044 { 2045 /* 2046 * cpu_hotplug_pm_callback has higher priority than x86 2047 * bsp_pm_callback which depends on cpu_hotplug_pm_callback 2048 * to disable cpu hotplug to avoid cpu hotplug race. 2049 */ 2050 pm_notifier(cpu_hotplug_pm_callback, 0); 2051 return 0; 2052 } 2053 core_initcall(cpu_hotplug_pm_sync_init); 2054 2055 #endif /* CONFIG_PM_SLEEP_SMP */ 2056 2057 int __boot_cpu_id; 2058 2059 #endif /* CONFIG_SMP */ 2060 2061 /* Boot processor state steps */ 2062 static struct cpuhp_step cpuhp_hp_states[] = { 2063 [CPUHP_OFFLINE] = { 2064 .name = "offline", 2065 .startup.single = NULL, 2066 .teardown.single = NULL, 2067 }, 2068 #ifdef CONFIG_SMP 2069 [CPUHP_CREATE_THREADS]= { 2070 .name = "threads:prepare", 2071 .startup.single = smpboot_create_threads, 2072 .teardown.single = NULL, 2073 .cant_stop = true, 2074 }, 2075 [CPUHP_PERF_PREPARE] = { 2076 .name = "perf:prepare", 2077 .startup.single = perf_event_init_cpu, 2078 .teardown.single = perf_event_exit_cpu, 2079 }, 2080 [CPUHP_RANDOM_PREPARE] = { 2081 .name = "random:prepare", 2082 .startup.single = random_prepare_cpu, 2083 .teardown.single = NULL, 2084 }, 2085 [CPUHP_WORKQUEUE_PREP] = { 2086 .name = "workqueue:prepare", 2087 .startup.single = workqueue_prepare_cpu, 2088 .teardown.single = NULL, 2089 }, 2090 [CPUHP_HRTIMERS_PREPARE] = { 2091 .name = "hrtimers:prepare", 2092 .startup.single = hrtimers_prepare_cpu, 2093 .teardown.single = NULL, 2094 }, 2095 [CPUHP_SMPCFD_PREPARE] = { 2096 .name = "smpcfd:prepare", 2097 .startup.single = smpcfd_prepare_cpu, 2098 .teardown.single = smpcfd_dead_cpu, 2099 }, 2100 [CPUHP_RELAY_PREPARE] = { 2101 .name = "relay:prepare", 2102 .startup.single = relay_prepare_cpu, 2103 .teardown.single = NULL, 2104 }, 2105 [CPUHP_RCUTREE_PREP] = { 2106 .name = "RCU/tree:prepare", 2107 .startup.single = rcutree_prepare_cpu, 2108 .teardown.single = rcutree_dead_cpu, 2109 }, 2110 /* 2111 * On the tear-down path, timers_dead_cpu() must be invoked 2112 * before blk_mq_queue_reinit_notify() from notify_dead(), 2113 * otherwise a RCU stall occurs. 2114 */ 2115 [CPUHP_TIMERS_PREPARE] = { 2116 .name = "timers:prepare", 2117 .startup.single = timers_prepare_cpu, 2118 .teardown.single = timers_dead_cpu, 2119 }, 2120 2121 #ifdef CONFIG_HOTPLUG_SPLIT_STARTUP 2122 /* 2123 * Kicks the AP alive. AP will wait in cpuhp_ap_sync_alive() until 2124 * the next step will release it. 2125 */ 2126 [CPUHP_BP_KICK_AP] = { 2127 .name = "cpu:kick_ap", 2128 .startup.single = cpuhp_kick_ap_alive, 2129 }, 2130 2131 /* 2132 * Waits for the AP to reach cpuhp_ap_sync_alive() and then 2133 * releases it for the complete bringup. 2134 */ 2135 [CPUHP_BRINGUP_CPU] = { 2136 .name = "cpu:bringup", 2137 .startup.single = cpuhp_bringup_ap, 2138 .teardown.single = finish_cpu, 2139 .cant_stop = true, 2140 }, 2141 #else 2142 /* 2143 * All-in-one CPU bringup state which includes the kick alive. 2144 */ 2145 [CPUHP_BRINGUP_CPU] = { 2146 .name = "cpu:bringup", 2147 .startup.single = bringup_cpu, 2148 .teardown.single = finish_cpu, 2149 .cant_stop = true, 2150 }, 2151 #endif 2152 /* Final state before CPU kills itself */ 2153 [CPUHP_AP_IDLE_DEAD] = { 2154 .name = "idle:dead", 2155 }, 2156 /* 2157 * Last state before CPU enters the idle loop to die. Transient state 2158 * for synchronization. 2159 */ 2160 [CPUHP_AP_OFFLINE] = { 2161 .name = "ap:offline", 2162 .cant_stop = true, 2163 }, 2164 /* First state is scheduler control. Interrupts are disabled */ 2165 [CPUHP_AP_SCHED_STARTING] = { 2166 .name = "sched:starting", 2167 .startup.single = sched_cpu_starting, 2168 .teardown.single = sched_cpu_dying, 2169 }, 2170 [CPUHP_AP_RCUTREE_DYING] = { 2171 .name = "RCU/tree:dying", 2172 .startup.single = NULL, 2173 .teardown.single = rcutree_dying_cpu, 2174 }, 2175 [CPUHP_AP_SMPCFD_DYING] = { 2176 .name = "smpcfd:dying", 2177 .startup.single = NULL, 2178 .teardown.single = smpcfd_dying_cpu, 2179 }, 2180 [CPUHP_AP_HRTIMERS_DYING] = { 2181 .name = "hrtimers:dying", 2182 .startup.single = NULL, 2183 .teardown.single = hrtimers_cpu_dying, 2184 }, 2185 [CPUHP_AP_TICK_DYING] = { 2186 .name = "tick:dying", 2187 .startup.single = NULL, 2188 .teardown.single = tick_cpu_dying, 2189 }, 2190 /* Entry state on starting. Interrupts enabled from here on. Transient 2191 * state for synchronsization */ 2192 [CPUHP_AP_ONLINE] = { 2193 .name = "ap:online", 2194 }, 2195 /* 2196 * Handled on control processor until the plugged processor manages 2197 * this itself. 2198 */ 2199 [CPUHP_TEARDOWN_CPU] = { 2200 .name = "cpu:teardown", 2201 .startup.single = NULL, 2202 .teardown.single = takedown_cpu, 2203 .cant_stop = true, 2204 }, 2205 2206 [CPUHP_AP_SCHED_WAIT_EMPTY] = { 2207 .name = "sched:waitempty", 2208 .startup.single = NULL, 2209 .teardown.single = sched_cpu_wait_empty, 2210 }, 2211 2212 /* Handle smpboot threads park/unpark */ 2213 [CPUHP_AP_SMPBOOT_THREADS] = { 2214 .name = "smpboot/threads:online", 2215 .startup.single = smpboot_unpark_threads, 2216 .teardown.single = smpboot_park_threads, 2217 }, 2218 [CPUHP_AP_IRQ_AFFINITY_ONLINE] = { 2219 .name = "irq/affinity:online", 2220 .startup.single = irq_affinity_online_cpu, 2221 .teardown.single = NULL, 2222 }, 2223 [CPUHP_AP_PERF_ONLINE] = { 2224 .name = "perf:online", 2225 .startup.single = perf_event_init_cpu, 2226 .teardown.single = perf_event_exit_cpu, 2227 }, 2228 [CPUHP_AP_WATCHDOG_ONLINE] = { 2229 .name = "lockup_detector:online", 2230 .startup.single = lockup_detector_online_cpu, 2231 .teardown.single = lockup_detector_offline_cpu, 2232 }, 2233 [CPUHP_AP_WORKQUEUE_ONLINE] = { 2234 .name = "workqueue:online", 2235 .startup.single = workqueue_online_cpu, 2236 .teardown.single = workqueue_offline_cpu, 2237 }, 2238 [CPUHP_AP_RANDOM_ONLINE] = { 2239 .name = "random:online", 2240 .startup.single = random_online_cpu, 2241 .teardown.single = NULL, 2242 }, 2243 [CPUHP_AP_RCUTREE_ONLINE] = { 2244 .name = "RCU/tree:online", 2245 .startup.single = rcutree_online_cpu, 2246 .teardown.single = rcutree_offline_cpu, 2247 }, 2248 #endif 2249 /* 2250 * The dynamically registered state space is here 2251 */ 2252 2253 #ifdef CONFIG_SMP 2254 /* Last state is scheduler control setting the cpu active */ 2255 [CPUHP_AP_ACTIVE] = { 2256 .name = "sched:active", 2257 .startup.single = sched_cpu_activate, 2258 .teardown.single = sched_cpu_deactivate, 2259 }, 2260 #endif 2261 2262 /* CPU is fully up and running. */ 2263 [CPUHP_ONLINE] = { 2264 .name = "online", 2265 .startup.single = NULL, 2266 .teardown.single = NULL, 2267 }, 2268 }; 2269 2270 /* Sanity check for callbacks */ 2271 static int cpuhp_cb_check(enum cpuhp_state state) 2272 { 2273 if (state <= CPUHP_OFFLINE || state >= CPUHP_ONLINE) 2274 return -EINVAL; 2275 return 0; 2276 } 2277 2278 /* 2279 * Returns a free for dynamic slot assignment of the Online state. The states 2280 * are protected by the cpuhp_slot_states mutex and an empty slot is identified 2281 * by having no name assigned. 2282 */ 2283 static int cpuhp_reserve_state(enum cpuhp_state state) 2284 { 2285 enum cpuhp_state i, end; 2286 struct cpuhp_step *step; 2287 2288 switch (state) { 2289 case CPUHP_AP_ONLINE_DYN: 2290 step = cpuhp_hp_states + CPUHP_AP_ONLINE_DYN; 2291 end = CPUHP_AP_ONLINE_DYN_END; 2292 break; 2293 case CPUHP_BP_PREPARE_DYN: 2294 step = cpuhp_hp_states + CPUHP_BP_PREPARE_DYN; 2295 end = CPUHP_BP_PREPARE_DYN_END; 2296 break; 2297 default: 2298 return -EINVAL; 2299 } 2300 2301 for (i = state; i <= end; i++, step++) { 2302 if (!step->name) 2303 return i; 2304 } 2305 WARN(1, "No more dynamic states available for CPU hotplug\n"); 2306 return -ENOSPC; 2307 } 2308 2309 static int cpuhp_store_callbacks(enum cpuhp_state state, const char *name, 2310 int (*startup)(unsigned int cpu), 2311 int (*teardown)(unsigned int cpu), 2312 bool multi_instance) 2313 { 2314 /* (Un)Install the callbacks for further cpu hotplug operations */ 2315 struct cpuhp_step *sp; 2316 int ret = 0; 2317 2318 /* 2319 * If name is NULL, then the state gets removed. 2320 * 2321 * CPUHP_AP_ONLINE_DYN and CPUHP_BP_PREPARE_DYN are handed out on 2322 * the first allocation from these dynamic ranges, so the removal 2323 * would trigger a new allocation and clear the wrong (already 2324 * empty) state, leaving the callbacks of the to be cleared state 2325 * dangling, which causes wreckage on the next hotplug operation. 2326 */ 2327 if (name && (state == CPUHP_AP_ONLINE_DYN || 2328 state == CPUHP_BP_PREPARE_DYN)) { 2329 ret = cpuhp_reserve_state(state); 2330 if (ret < 0) 2331 return ret; 2332 state = ret; 2333 } 2334 sp = cpuhp_get_step(state); 2335 if (name && sp->name) 2336 return -EBUSY; 2337 2338 sp->startup.single = startup; 2339 sp->teardown.single = teardown; 2340 sp->name = name; 2341 sp->multi_instance = multi_instance; 2342 INIT_HLIST_HEAD(&sp->list); 2343 return ret; 2344 } 2345 2346 static void *cpuhp_get_teardown_cb(enum cpuhp_state state) 2347 { 2348 return cpuhp_get_step(state)->teardown.single; 2349 } 2350 2351 /* 2352 * Call the startup/teardown function for a step either on the AP or 2353 * on the current CPU. 2354 */ 2355 static int cpuhp_issue_call(int cpu, enum cpuhp_state state, bool bringup, 2356 struct hlist_node *node) 2357 { 2358 struct cpuhp_step *sp = cpuhp_get_step(state); 2359 int ret; 2360 2361 /* 2362 * If there's nothing to do, we done. 2363 * Relies on the union for multi_instance. 2364 */ 2365 if (cpuhp_step_empty(bringup, sp)) 2366 return 0; 2367 /* 2368 * The non AP bound callbacks can fail on bringup. On teardown 2369 * e.g. module removal we crash for now. 2370 */ 2371 #ifdef CONFIG_SMP 2372 if (cpuhp_is_ap_state(state)) 2373 ret = cpuhp_invoke_ap_callback(cpu, state, bringup, node); 2374 else 2375 ret = cpuhp_invoke_callback(cpu, state, bringup, node, NULL); 2376 #else 2377 ret = cpuhp_invoke_callback(cpu, state, bringup, node, NULL); 2378 #endif 2379 BUG_ON(ret && !bringup); 2380 return ret; 2381 } 2382 2383 /* 2384 * Called from __cpuhp_setup_state on a recoverable failure. 2385 * 2386 * Note: The teardown callbacks for rollback are not allowed to fail! 2387 */ 2388 static void cpuhp_rollback_install(int failedcpu, enum cpuhp_state state, 2389 struct hlist_node *node) 2390 { 2391 int cpu; 2392 2393 /* Roll back the already executed steps on the other cpus */ 2394 for_each_present_cpu(cpu) { 2395 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); 2396 int cpustate = st->state; 2397 2398 if (cpu >= failedcpu) 2399 break; 2400 2401 /* Did we invoke the startup call on that cpu ? */ 2402 if (cpustate >= state) 2403 cpuhp_issue_call(cpu, state, false, node); 2404 } 2405 } 2406 2407 int __cpuhp_state_add_instance_cpuslocked(enum cpuhp_state state, 2408 struct hlist_node *node, 2409 bool invoke) 2410 { 2411 struct cpuhp_step *sp; 2412 int cpu; 2413 int ret; 2414 2415 lockdep_assert_cpus_held(); 2416 2417 sp = cpuhp_get_step(state); 2418 if (sp->multi_instance == false) 2419 return -EINVAL; 2420 2421 mutex_lock(&cpuhp_state_mutex); 2422 2423 if (!invoke || !sp->startup.multi) 2424 goto add_node; 2425 2426 /* 2427 * Try to call the startup callback for each present cpu 2428 * depending on the hotplug state of the cpu. 2429 */ 2430 for_each_present_cpu(cpu) { 2431 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); 2432 int cpustate = st->state; 2433 2434 if (cpustate < state) 2435 continue; 2436 2437 ret = cpuhp_issue_call(cpu, state, true, node); 2438 if (ret) { 2439 if (sp->teardown.multi) 2440 cpuhp_rollback_install(cpu, state, node); 2441 goto unlock; 2442 } 2443 } 2444 add_node: 2445 ret = 0; 2446 hlist_add_head(node, &sp->list); 2447 unlock: 2448 mutex_unlock(&cpuhp_state_mutex); 2449 return ret; 2450 } 2451 2452 int __cpuhp_state_add_instance(enum cpuhp_state state, struct hlist_node *node, 2453 bool invoke) 2454 { 2455 int ret; 2456 2457 cpus_read_lock(); 2458 ret = __cpuhp_state_add_instance_cpuslocked(state, node, invoke); 2459 cpus_read_unlock(); 2460 return ret; 2461 } 2462 EXPORT_SYMBOL_GPL(__cpuhp_state_add_instance); 2463 2464 /** 2465 * __cpuhp_setup_state_cpuslocked - Setup the callbacks for an hotplug machine state 2466 * @state: The state to setup 2467 * @name: Name of the step 2468 * @invoke: If true, the startup function is invoked for cpus where 2469 * cpu state >= @state 2470 * @startup: startup callback function 2471 * @teardown: teardown callback function 2472 * @multi_instance: State is set up for multiple instances which get 2473 * added afterwards. 2474 * 2475 * The caller needs to hold cpus read locked while calling this function. 2476 * Return: 2477 * On success: 2478 * Positive state number if @state is CPUHP_AP_ONLINE_DYN or CPUHP_BP_PREPARE_DYN; 2479 * 0 for all other states 2480 * On failure: proper (negative) error code 2481 */ 2482 int __cpuhp_setup_state_cpuslocked(enum cpuhp_state state, 2483 const char *name, bool invoke, 2484 int (*startup)(unsigned int cpu), 2485 int (*teardown)(unsigned int cpu), 2486 bool multi_instance) 2487 { 2488 int cpu, ret = 0; 2489 bool dynstate; 2490 2491 lockdep_assert_cpus_held(); 2492 2493 if (cpuhp_cb_check(state) || !name) 2494 return -EINVAL; 2495 2496 mutex_lock(&cpuhp_state_mutex); 2497 2498 ret = cpuhp_store_callbacks(state, name, startup, teardown, 2499 multi_instance); 2500 2501 dynstate = state == CPUHP_AP_ONLINE_DYN || state == CPUHP_BP_PREPARE_DYN; 2502 if (ret > 0 && dynstate) { 2503 state = ret; 2504 ret = 0; 2505 } 2506 2507 if (ret || !invoke || !startup) 2508 goto out; 2509 2510 /* 2511 * Try to call the startup callback for each present cpu 2512 * depending on the hotplug state of the cpu. 2513 */ 2514 for_each_present_cpu(cpu) { 2515 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); 2516 int cpustate = st->state; 2517 2518 if (cpustate < state) 2519 continue; 2520 2521 ret = cpuhp_issue_call(cpu, state, true, NULL); 2522 if (ret) { 2523 if (teardown) 2524 cpuhp_rollback_install(cpu, state, NULL); 2525 cpuhp_store_callbacks(state, NULL, NULL, NULL, false); 2526 goto out; 2527 } 2528 } 2529 out: 2530 mutex_unlock(&cpuhp_state_mutex); 2531 /* 2532 * If the requested state is CPUHP_AP_ONLINE_DYN or CPUHP_BP_PREPARE_DYN, 2533 * return the dynamically allocated state in case of success. 2534 */ 2535 if (!ret && dynstate) 2536 return state; 2537 return ret; 2538 } 2539 EXPORT_SYMBOL(__cpuhp_setup_state_cpuslocked); 2540 2541 int __cpuhp_setup_state(enum cpuhp_state state, 2542 const char *name, bool invoke, 2543 int (*startup)(unsigned int cpu), 2544 int (*teardown)(unsigned int cpu), 2545 bool multi_instance) 2546 { 2547 int ret; 2548 2549 cpus_read_lock(); 2550 ret = __cpuhp_setup_state_cpuslocked(state, name, invoke, startup, 2551 teardown, multi_instance); 2552 cpus_read_unlock(); 2553 return ret; 2554 } 2555 EXPORT_SYMBOL(__cpuhp_setup_state); 2556 2557 int __cpuhp_state_remove_instance(enum cpuhp_state state, 2558 struct hlist_node *node, bool invoke) 2559 { 2560 struct cpuhp_step *sp = cpuhp_get_step(state); 2561 int cpu; 2562 2563 BUG_ON(cpuhp_cb_check(state)); 2564 2565 if (!sp->multi_instance) 2566 return -EINVAL; 2567 2568 cpus_read_lock(); 2569 mutex_lock(&cpuhp_state_mutex); 2570 2571 if (!invoke || !cpuhp_get_teardown_cb(state)) 2572 goto remove; 2573 /* 2574 * Call the teardown callback for each present cpu depending 2575 * on the hotplug state of the cpu. This function is not 2576 * allowed to fail currently! 2577 */ 2578 for_each_present_cpu(cpu) { 2579 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); 2580 int cpustate = st->state; 2581 2582 if (cpustate >= state) 2583 cpuhp_issue_call(cpu, state, false, node); 2584 } 2585 2586 remove: 2587 hlist_del(node); 2588 mutex_unlock(&cpuhp_state_mutex); 2589 cpus_read_unlock(); 2590 2591 return 0; 2592 } 2593 EXPORT_SYMBOL_GPL(__cpuhp_state_remove_instance); 2594 2595 /** 2596 * __cpuhp_remove_state_cpuslocked - Remove the callbacks for an hotplug machine state 2597 * @state: The state to remove 2598 * @invoke: If true, the teardown function is invoked for cpus where 2599 * cpu state >= @state 2600 * 2601 * The caller needs to hold cpus read locked while calling this function. 2602 * The teardown callback is currently not allowed to fail. Think 2603 * about module removal! 2604 */ 2605 void __cpuhp_remove_state_cpuslocked(enum cpuhp_state state, bool invoke) 2606 { 2607 struct cpuhp_step *sp = cpuhp_get_step(state); 2608 int cpu; 2609 2610 BUG_ON(cpuhp_cb_check(state)); 2611 2612 lockdep_assert_cpus_held(); 2613 2614 mutex_lock(&cpuhp_state_mutex); 2615 if (sp->multi_instance) { 2616 WARN(!hlist_empty(&sp->list), 2617 "Error: Removing state %d which has instances left.\n", 2618 state); 2619 goto remove; 2620 } 2621 2622 if (!invoke || !cpuhp_get_teardown_cb(state)) 2623 goto remove; 2624 2625 /* 2626 * Call the teardown callback for each present cpu depending 2627 * on the hotplug state of the cpu. This function is not 2628 * allowed to fail currently! 2629 */ 2630 for_each_present_cpu(cpu) { 2631 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); 2632 int cpustate = st->state; 2633 2634 if (cpustate >= state) 2635 cpuhp_issue_call(cpu, state, false, NULL); 2636 } 2637 remove: 2638 cpuhp_store_callbacks(state, NULL, NULL, NULL, false); 2639 mutex_unlock(&cpuhp_state_mutex); 2640 } 2641 EXPORT_SYMBOL(__cpuhp_remove_state_cpuslocked); 2642 2643 void __cpuhp_remove_state(enum cpuhp_state state, bool invoke) 2644 { 2645 cpus_read_lock(); 2646 __cpuhp_remove_state_cpuslocked(state, invoke); 2647 cpus_read_unlock(); 2648 } 2649 EXPORT_SYMBOL(__cpuhp_remove_state); 2650 2651 #ifdef CONFIG_HOTPLUG_SMT 2652 static void cpuhp_offline_cpu_device(unsigned int cpu) 2653 { 2654 struct device *dev = get_cpu_device(cpu); 2655 2656 dev->offline = true; 2657 /* Tell user space about the state change */ 2658 kobject_uevent(&dev->kobj, KOBJ_OFFLINE); 2659 } 2660 2661 static void cpuhp_online_cpu_device(unsigned int cpu) 2662 { 2663 struct device *dev = get_cpu_device(cpu); 2664 2665 dev->offline = false; 2666 /* Tell user space about the state change */ 2667 kobject_uevent(&dev->kobj, KOBJ_ONLINE); 2668 } 2669 2670 int cpuhp_smt_disable(enum cpuhp_smt_control ctrlval) 2671 { 2672 int cpu, ret = 0; 2673 2674 cpu_maps_update_begin(); 2675 for_each_online_cpu(cpu) { 2676 if (topology_is_primary_thread(cpu)) 2677 continue; 2678 /* 2679 * Disable can be called with CPU_SMT_ENABLED when changing 2680 * from a higher to lower number of SMT threads per core. 2681 */ 2682 if (ctrlval == CPU_SMT_ENABLED && cpu_smt_thread_allowed(cpu)) 2683 continue; 2684 ret = cpu_down_maps_locked(cpu, CPUHP_OFFLINE); 2685 if (ret) 2686 break; 2687 /* 2688 * As this needs to hold the cpu maps lock it's impossible 2689 * to call device_offline() because that ends up calling 2690 * cpu_down() which takes cpu maps lock. cpu maps lock 2691 * needs to be held as this might race against in kernel 2692 * abusers of the hotplug machinery (thermal management). 2693 * 2694 * So nothing would update device:offline state. That would 2695 * leave the sysfs entry stale and prevent onlining after 2696 * smt control has been changed to 'off' again. This is 2697 * called under the sysfs hotplug lock, so it is properly 2698 * serialized against the regular offline usage. 2699 */ 2700 cpuhp_offline_cpu_device(cpu); 2701 } 2702 if (!ret) 2703 cpu_smt_control = ctrlval; 2704 cpu_maps_update_done(); 2705 return ret; 2706 } 2707 2708 /* Check if the core a CPU belongs to is online */ 2709 #if !defined(topology_is_core_online) 2710 static inline bool topology_is_core_online(unsigned int cpu) 2711 { 2712 return true; 2713 } 2714 #endif 2715 2716 int cpuhp_smt_enable(void) 2717 { 2718 int cpu, ret = 0; 2719 2720 cpu_maps_update_begin(); 2721 cpu_smt_control = CPU_SMT_ENABLED; 2722 for_each_present_cpu(cpu) { 2723 /* Skip online CPUs and CPUs on offline nodes */ 2724 if (cpu_online(cpu) || !node_online(cpu_to_node(cpu))) 2725 continue; 2726 if (!cpu_smt_thread_allowed(cpu) || !topology_is_core_online(cpu)) 2727 continue; 2728 ret = _cpu_up(cpu, 0, CPUHP_ONLINE); 2729 if (ret) 2730 break; 2731 /* See comment in cpuhp_smt_disable() */ 2732 cpuhp_online_cpu_device(cpu); 2733 } 2734 cpu_maps_update_done(); 2735 return ret; 2736 } 2737 #endif 2738 2739 #if defined(CONFIG_SYSFS) && defined(CONFIG_HOTPLUG_CPU) 2740 static ssize_t state_show(struct device *dev, 2741 struct device_attribute *attr, char *buf) 2742 { 2743 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id); 2744 2745 return sprintf(buf, "%d\n", st->state); 2746 } 2747 static DEVICE_ATTR_RO(state); 2748 2749 static ssize_t target_store(struct device *dev, struct device_attribute *attr, 2750 const char *buf, size_t count) 2751 { 2752 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id); 2753 struct cpuhp_step *sp; 2754 int target, ret; 2755 2756 ret = kstrtoint(buf, 10, &target); 2757 if (ret) 2758 return ret; 2759 2760 #ifdef CONFIG_CPU_HOTPLUG_STATE_CONTROL 2761 if (target < CPUHP_OFFLINE || target > CPUHP_ONLINE) 2762 return -EINVAL; 2763 #else 2764 if (target != CPUHP_OFFLINE && target != CPUHP_ONLINE) 2765 return -EINVAL; 2766 #endif 2767 2768 ret = lock_device_hotplug_sysfs(); 2769 if (ret) 2770 return ret; 2771 2772 mutex_lock(&cpuhp_state_mutex); 2773 sp = cpuhp_get_step(target); 2774 ret = !sp->name || sp->cant_stop ? -EINVAL : 0; 2775 mutex_unlock(&cpuhp_state_mutex); 2776 if (ret) 2777 goto out; 2778 2779 if (st->state < target) 2780 ret = cpu_up(dev->id, target); 2781 else if (st->state > target) 2782 ret = cpu_down(dev->id, target); 2783 else if (WARN_ON(st->target != target)) 2784 st->target = target; 2785 out: 2786 unlock_device_hotplug(); 2787 return ret ? ret : count; 2788 } 2789 2790 static ssize_t target_show(struct device *dev, 2791 struct device_attribute *attr, char *buf) 2792 { 2793 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id); 2794 2795 return sprintf(buf, "%d\n", st->target); 2796 } 2797 static DEVICE_ATTR_RW(target); 2798 2799 static ssize_t fail_store(struct device *dev, struct device_attribute *attr, 2800 const char *buf, size_t count) 2801 { 2802 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id); 2803 struct cpuhp_step *sp; 2804 int fail, ret; 2805 2806 ret = kstrtoint(buf, 10, &fail); 2807 if (ret) 2808 return ret; 2809 2810 if (fail == CPUHP_INVALID) { 2811 st->fail = fail; 2812 return count; 2813 } 2814 2815 if (fail < CPUHP_OFFLINE || fail > CPUHP_ONLINE) 2816 return -EINVAL; 2817 2818 /* 2819 * Cannot fail STARTING/DYING callbacks. 2820 */ 2821 if (cpuhp_is_atomic_state(fail)) 2822 return -EINVAL; 2823 2824 /* 2825 * DEAD callbacks cannot fail... 2826 * ... neither can CPUHP_BRINGUP_CPU during hotunplug. The latter 2827 * triggering STARTING callbacks, a failure in this state would 2828 * hinder rollback. 2829 */ 2830 if (fail <= CPUHP_BRINGUP_CPU && st->state > CPUHP_BRINGUP_CPU) 2831 return -EINVAL; 2832 2833 /* 2834 * Cannot fail anything that doesn't have callbacks. 2835 */ 2836 mutex_lock(&cpuhp_state_mutex); 2837 sp = cpuhp_get_step(fail); 2838 if (!sp->startup.single && !sp->teardown.single) 2839 ret = -EINVAL; 2840 mutex_unlock(&cpuhp_state_mutex); 2841 if (ret) 2842 return ret; 2843 2844 st->fail = fail; 2845 2846 return count; 2847 } 2848 2849 static ssize_t fail_show(struct device *dev, 2850 struct device_attribute *attr, char *buf) 2851 { 2852 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id); 2853 2854 return sprintf(buf, "%d\n", st->fail); 2855 } 2856 2857 static DEVICE_ATTR_RW(fail); 2858 2859 static struct attribute *cpuhp_cpu_attrs[] = { 2860 &dev_attr_state.attr, 2861 &dev_attr_target.attr, 2862 &dev_attr_fail.attr, 2863 NULL 2864 }; 2865 2866 static const struct attribute_group cpuhp_cpu_attr_group = { 2867 .attrs = cpuhp_cpu_attrs, 2868 .name = "hotplug", 2869 NULL 2870 }; 2871 2872 static ssize_t states_show(struct device *dev, 2873 struct device_attribute *attr, char *buf) 2874 { 2875 ssize_t cur, res = 0; 2876 int i; 2877 2878 mutex_lock(&cpuhp_state_mutex); 2879 for (i = CPUHP_OFFLINE; i <= CPUHP_ONLINE; i++) { 2880 struct cpuhp_step *sp = cpuhp_get_step(i); 2881 2882 if (sp->name) { 2883 cur = sprintf(buf, "%3d: %s\n", i, sp->name); 2884 buf += cur; 2885 res += cur; 2886 } 2887 } 2888 mutex_unlock(&cpuhp_state_mutex); 2889 return res; 2890 } 2891 static DEVICE_ATTR_RO(states); 2892 2893 static struct attribute *cpuhp_cpu_root_attrs[] = { 2894 &dev_attr_states.attr, 2895 NULL 2896 }; 2897 2898 static const struct attribute_group cpuhp_cpu_root_attr_group = { 2899 .attrs = cpuhp_cpu_root_attrs, 2900 .name = "hotplug", 2901 NULL 2902 }; 2903 2904 #ifdef CONFIG_HOTPLUG_SMT 2905 2906 static bool cpu_smt_num_threads_valid(unsigned int threads) 2907 { 2908 if (IS_ENABLED(CONFIG_SMT_NUM_THREADS_DYNAMIC)) 2909 return threads >= 1 && threads <= cpu_smt_max_threads; 2910 return threads == 1 || threads == cpu_smt_max_threads; 2911 } 2912 2913 static ssize_t 2914 __store_smt_control(struct device *dev, struct device_attribute *attr, 2915 const char *buf, size_t count) 2916 { 2917 int ctrlval, ret, num_threads, orig_threads; 2918 bool force_off; 2919 2920 if (cpu_smt_control == CPU_SMT_FORCE_DISABLED) 2921 return -EPERM; 2922 2923 if (cpu_smt_control == CPU_SMT_NOT_SUPPORTED) 2924 return -ENODEV; 2925 2926 if (sysfs_streq(buf, "on")) { 2927 ctrlval = CPU_SMT_ENABLED; 2928 num_threads = cpu_smt_max_threads; 2929 } else if (sysfs_streq(buf, "off")) { 2930 ctrlval = CPU_SMT_DISABLED; 2931 num_threads = 1; 2932 } else if (sysfs_streq(buf, "forceoff")) { 2933 ctrlval = CPU_SMT_FORCE_DISABLED; 2934 num_threads = 1; 2935 } else if (kstrtoint(buf, 10, &num_threads) == 0) { 2936 if (num_threads == 1) 2937 ctrlval = CPU_SMT_DISABLED; 2938 else if (cpu_smt_num_threads_valid(num_threads)) 2939 ctrlval = CPU_SMT_ENABLED; 2940 else 2941 return -EINVAL; 2942 } else { 2943 return -EINVAL; 2944 } 2945 2946 ret = lock_device_hotplug_sysfs(); 2947 if (ret) 2948 return ret; 2949 2950 orig_threads = cpu_smt_num_threads; 2951 cpu_smt_num_threads = num_threads; 2952 2953 force_off = ctrlval != cpu_smt_control && ctrlval == CPU_SMT_FORCE_DISABLED; 2954 2955 if (num_threads > orig_threads) 2956 ret = cpuhp_smt_enable(); 2957 else if (num_threads < orig_threads || force_off) 2958 ret = cpuhp_smt_disable(ctrlval); 2959 2960 unlock_device_hotplug(); 2961 return ret ? ret : count; 2962 } 2963 2964 #else /* !CONFIG_HOTPLUG_SMT */ 2965 static ssize_t 2966 __store_smt_control(struct device *dev, struct device_attribute *attr, 2967 const char *buf, size_t count) 2968 { 2969 return -ENODEV; 2970 } 2971 #endif /* CONFIG_HOTPLUG_SMT */ 2972 2973 static const char *smt_states[] = { 2974 [CPU_SMT_ENABLED] = "on", 2975 [CPU_SMT_DISABLED] = "off", 2976 [CPU_SMT_FORCE_DISABLED] = "forceoff", 2977 [CPU_SMT_NOT_SUPPORTED] = "notsupported", 2978 [CPU_SMT_NOT_IMPLEMENTED] = "notimplemented", 2979 }; 2980 2981 static ssize_t control_show(struct device *dev, 2982 struct device_attribute *attr, char *buf) 2983 { 2984 const char *state = smt_states[cpu_smt_control]; 2985 2986 #ifdef CONFIG_HOTPLUG_SMT 2987 /* 2988 * If SMT is enabled but not all threads are enabled then show the 2989 * number of threads. If all threads are enabled show "on". Otherwise 2990 * show the state name. 2991 */ 2992 if (cpu_smt_control == CPU_SMT_ENABLED && 2993 cpu_smt_num_threads != cpu_smt_max_threads) 2994 return sysfs_emit(buf, "%d\n", cpu_smt_num_threads); 2995 #endif 2996 2997 return sysfs_emit(buf, "%s\n", state); 2998 } 2999 3000 static ssize_t control_store(struct device *dev, struct device_attribute *attr, 3001 const char *buf, size_t count) 3002 { 3003 return __store_smt_control(dev, attr, buf, count); 3004 } 3005 static DEVICE_ATTR_RW(control); 3006 3007 static ssize_t active_show(struct device *dev, 3008 struct device_attribute *attr, char *buf) 3009 { 3010 return sysfs_emit(buf, "%d\n", sched_smt_active()); 3011 } 3012 static DEVICE_ATTR_RO(active); 3013 3014 static struct attribute *cpuhp_smt_attrs[] = { 3015 &dev_attr_control.attr, 3016 &dev_attr_active.attr, 3017 NULL 3018 }; 3019 3020 static const struct attribute_group cpuhp_smt_attr_group = { 3021 .attrs = cpuhp_smt_attrs, 3022 .name = "smt", 3023 NULL 3024 }; 3025 3026 static int __init cpu_smt_sysfs_init(void) 3027 { 3028 struct device *dev_root; 3029 int ret = -ENODEV; 3030 3031 dev_root = bus_get_dev_root(&cpu_subsys); 3032 if (dev_root) { 3033 ret = sysfs_create_group(&dev_root->kobj, &cpuhp_smt_attr_group); 3034 put_device(dev_root); 3035 } 3036 return ret; 3037 } 3038 3039 static int __init cpuhp_sysfs_init(void) 3040 { 3041 struct device *dev_root; 3042 int cpu, ret; 3043 3044 ret = cpu_smt_sysfs_init(); 3045 if (ret) 3046 return ret; 3047 3048 dev_root = bus_get_dev_root(&cpu_subsys); 3049 if (dev_root) { 3050 ret = sysfs_create_group(&dev_root->kobj, &cpuhp_cpu_root_attr_group); 3051 put_device(dev_root); 3052 if (ret) 3053 return ret; 3054 } 3055 3056 for_each_possible_cpu(cpu) { 3057 struct device *dev = get_cpu_device(cpu); 3058 3059 if (!dev) 3060 continue; 3061 ret = sysfs_create_group(&dev->kobj, &cpuhp_cpu_attr_group); 3062 if (ret) 3063 return ret; 3064 } 3065 return 0; 3066 } 3067 device_initcall(cpuhp_sysfs_init); 3068 #endif /* CONFIG_SYSFS && CONFIG_HOTPLUG_CPU */ 3069 3070 /* 3071 * cpu_bit_bitmap[] is a special, "compressed" data structure that 3072 * represents all NR_CPUS bits binary values of 1<<nr. 3073 * 3074 * It is used by cpumask_of() to get a constant address to a CPU 3075 * mask value that has a single bit set only. 3076 */ 3077 3078 /* cpu_bit_bitmap[0] is empty - so we can back into it */ 3079 #define MASK_DECLARE_1(x) [x+1][0] = (1UL << (x)) 3080 #define MASK_DECLARE_2(x) MASK_DECLARE_1(x), MASK_DECLARE_1(x+1) 3081 #define MASK_DECLARE_4(x) MASK_DECLARE_2(x), MASK_DECLARE_2(x+2) 3082 #define MASK_DECLARE_8(x) MASK_DECLARE_4(x), MASK_DECLARE_4(x+4) 3083 3084 const unsigned long cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)] = { 3085 3086 MASK_DECLARE_8(0), MASK_DECLARE_8(8), 3087 MASK_DECLARE_8(16), MASK_DECLARE_8(24), 3088 #if BITS_PER_LONG > 32 3089 MASK_DECLARE_8(32), MASK_DECLARE_8(40), 3090 MASK_DECLARE_8(48), MASK_DECLARE_8(56), 3091 #endif 3092 }; 3093 EXPORT_SYMBOL_GPL(cpu_bit_bitmap); 3094 3095 const DECLARE_BITMAP(cpu_all_bits, NR_CPUS) = CPU_BITS_ALL; 3096 EXPORT_SYMBOL(cpu_all_bits); 3097 3098 #ifdef CONFIG_INIT_ALL_POSSIBLE 3099 struct cpumask __cpu_possible_mask __ro_after_init 3100 = {CPU_BITS_ALL}; 3101 #else 3102 struct cpumask __cpu_possible_mask __ro_after_init; 3103 #endif 3104 EXPORT_SYMBOL(__cpu_possible_mask); 3105 3106 struct cpumask __cpu_online_mask __read_mostly; 3107 EXPORT_SYMBOL(__cpu_online_mask); 3108 3109 struct cpumask __cpu_enabled_mask __read_mostly; 3110 EXPORT_SYMBOL(__cpu_enabled_mask); 3111 3112 struct cpumask __cpu_present_mask __read_mostly; 3113 EXPORT_SYMBOL(__cpu_present_mask); 3114 3115 struct cpumask __cpu_active_mask __read_mostly; 3116 EXPORT_SYMBOL(__cpu_active_mask); 3117 3118 struct cpumask __cpu_dying_mask __read_mostly; 3119 EXPORT_SYMBOL(__cpu_dying_mask); 3120 3121 atomic_t __num_online_cpus __read_mostly; 3122 EXPORT_SYMBOL(__num_online_cpus); 3123 3124 void init_cpu_present(const struct cpumask *src) 3125 { 3126 cpumask_copy(&__cpu_present_mask, src); 3127 } 3128 3129 void init_cpu_possible(const struct cpumask *src) 3130 { 3131 cpumask_copy(&__cpu_possible_mask, src); 3132 } 3133 3134 void init_cpu_online(const struct cpumask *src) 3135 { 3136 cpumask_copy(&__cpu_online_mask, src); 3137 } 3138 3139 void set_cpu_online(unsigned int cpu, bool online) 3140 { 3141 /* 3142 * atomic_inc/dec() is required to handle the horrid abuse of this 3143 * function by the reboot and kexec code which invoke it from 3144 * IPI/NMI broadcasts when shutting down CPUs. Invocation from 3145 * regular CPU hotplug is properly serialized. 3146 * 3147 * Note, that the fact that __num_online_cpus is of type atomic_t 3148 * does not protect readers which are not serialized against 3149 * concurrent hotplug operations. 3150 */ 3151 if (online) { 3152 if (!cpumask_test_and_set_cpu(cpu, &__cpu_online_mask)) 3153 atomic_inc(&__num_online_cpus); 3154 } else { 3155 if (cpumask_test_and_clear_cpu(cpu, &__cpu_online_mask)) 3156 atomic_dec(&__num_online_cpus); 3157 } 3158 } 3159 3160 /* 3161 * Activate the first processor. 3162 */ 3163 void __init boot_cpu_init(void) 3164 { 3165 int cpu = smp_processor_id(); 3166 3167 /* Mark the boot cpu "present", "online" etc for SMP and UP case */ 3168 set_cpu_online(cpu, true); 3169 set_cpu_active(cpu, true); 3170 set_cpu_present(cpu, true); 3171 set_cpu_possible(cpu, true); 3172 3173 #ifdef CONFIG_SMP 3174 __boot_cpu_id = cpu; 3175 #endif 3176 } 3177 3178 /* 3179 * Must be called _AFTER_ setting up the per_cpu areas 3180 */ 3181 void __init boot_cpu_hotplug_init(void) 3182 { 3183 #ifdef CONFIG_SMP 3184 cpumask_set_cpu(smp_processor_id(), &cpus_booted_once_mask); 3185 atomic_set(this_cpu_ptr(&cpuhp_state.ap_sync_state), SYNC_STATE_ONLINE); 3186 #endif 3187 this_cpu_write(cpuhp_state.state, CPUHP_ONLINE); 3188 this_cpu_write(cpuhp_state.target, CPUHP_ONLINE); 3189 } 3190 3191 #ifdef CONFIG_CPU_MITIGATIONS 3192 /* 3193 * These are used for a global "mitigations=" cmdline option for toggling 3194 * optional CPU mitigations. 3195 */ 3196 enum cpu_mitigations { 3197 CPU_MITIGATIONS_OFF, 3198 CPU_MITIGATIONS_AUTO, 3199 CPU_MITIGATIONS_AUTO_NOSMT, 3200 }; 3201 3202 static enum cpu_mitigations cpu_mitigations __ro_after_init = CPU_MITIGATIONS_AUTO; 3203 3204 static int __init mitigations_parse_cmdline(char *arg) 3205 { 3206 if (!strcmp(arg, "off")) 3207 cpu_mitigations = CPU_MITIGATIONS_OFF; 3208 else if (!strcmp(arg, "auto")) 3209 cpu_mitigations = CPU_MITIGATIONS_AUTO; 3210 else if (!strcmp(arg, "auto,nosmt")) 3211 cpu_mitigations = CPU_MITIGATIONS_AUTO_NOSMT; 3212 else 3213 pr_crit("Unsupported mitigations=%s, system may still be vulnerable\n", 3214 arg); 3215 3216 return 0; 3217 } 3218 3219 /* mitigations=off */ 3220 bool cpu_mitigations_off(void) 3221 { 3222 return cpu_mitigations == CPU_MITIGATIONS_OFF; 3223 } 3224 EXPORT_SYMBOL_GPL(cpu_mitigations_off); 3225 3226 /* mitigations=auto,nosmt */ 3227 bool cpu_mitigations_auto_nosmt(void) 3228 { 3229 return cpu_mitigations == CPU_MITIGATIONS_AUTO_NOSMT; 3230 } 3231 EXPORT_SYMBOL_GPL(cpu_mitigations_auto_nosmt); 3232 #else 3233 static int __init mitigations_parse_cmdline(char *arg) 3234 { 3235 pr_crit("Kernel compiled without mitigations, ignoring 'mitigations'; system may still be vulnerable\n"); 3236 return 0; 3237 } 3238 #endif 3239 early_param("mitigations", mitigations_parse_cmdline); 3240