xref: /linux/include/ufs/ufshcd.h (revision 4359a011e259a4608afc7fb3635370c9d4ba5943)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  * Universal Flash Storage Host controller driver
4  * Copyright (C) 2011-2013 Samsung India Software Operations
5  * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
6  *
7  * Authors:
8  *	Santosh Yaraganavi <santosh.sy@samsung.com>
9  *	Vinayak Holikatti <h.vinayak@samsung.com>
10  */
11 
12 #ifndef _UFSHCD_H
13 #define _UFSHCD_H
14 
15 #include <linux/bitfield.h>
16 #include <linux/blk-crypto-profile.h>
17 #include <linux/blk-mq.h>
18 #include <linux/devfreq.h>
19 #include <linux/pm_runtime.h>
20 #include <scsi/scsi_device.h>
21 #include <ufs/unipro.h>
22 #include <ufs/ufs.h>
23 #include <ufs/ufs_quirks.h>
24 #include <ufs/ufshci.h>
25 
26 #define UFSHCD "ufshcd"
27 
28 struct ufs_hba;
29 
30 enum dev_cmd_type {
31 	DEV_CMD_TYPE_NOP		= 0x0,
32 	DEV_CMD_TYPE_QUERY		= 0x1,
33 };
34 
35 enum ufs_event_type {
36 	/* uic specific errors */
37 	UFS_EVT_PA_ERR = 0,
38 	UFS_EVT_DL_ERR,
39 	UFS_EVT_NL_ERR,
40 	UFS_EVT_TL_ERR,
41 	UFS_EVT_DME_ERR,
42 
43 	/* fatal errors */
44 	UFS_EVT_AUTO_HIBERN8_ERR,
45 	UFS_EVT_FATAL_ERR,
46 	UFS_EVT_LINK_STARTUP_FAIL,
47 	UFS_EVT_RESUME_ERR,
48 	UFS_EVT_SUSPEND_ERR,
49 	UFS_EVT_WL_SUSP_ERR,
50 	UFS_EVT_WL_RES_ERR,
51 
52 	/* abnormal events */
53 	UFS_EVT_DEV_RESET,
54 	UFS_EVT_HOST_RESET,
55 	UFS_EVT_ABORT,
56 
57 	UFS_EVT_CNT,
58 };
59 
60 /**
61  * struct uic_command - UIC command structure
62  * @command: UIC command
63  * @argument1: UIC command argument 1
64  * @argument2: UIC command argument 2
65  * @argument3: UIC command argument 3
66  * @cmd_active: Indicate if UIC command is outstanding
67  * @done: UIC command completion
68  */
69 struct uic_command {
70 	u32 command;
71 	u32 argument1;
72 	u32 argument2;
73 	u32 argument3;
74 	int cmd_active;
75 	struct completion done;
76 };
77 
78 /* Used to differentiate the power management options */
79 enum ufs_pm_op {
80 	UFS_RUNTIME_PM,
81 	UFS_SYSTEM_PM,
82 	UFS_SHUTDOWN_PM,
83 };
84 
85 /* Host <-> Device UniPro Link state */
86 enum uic_link_state {
87 	UIC_LINK_OFF_STATE	= 0, /* Link powered down or disabled */
88 	UIC_LINK_ACTIVE_STATE	= 1, /* Link is in Fast/Slow/Sleep state */
89 	UIC_LINK_HIBERN8_STATE	= 2, /* Link is in Hibernate state */
90 	UIC_LINK_BROKEN_STATE	= 3, /* Link is in broken state */
91 };
92 
93 #define ufshcd_is_link_off(hba) ((hba)->uic_link_state == UIC_LINK_OFF_STATE)
94 #define ufshcd_is_link_active(hba) ((hba)->uic_link_state == \
95 				    UIC_LINK_ACTIVE_STATE)
96 #define ufshcd_is_link_hibern8(hba) ((hba)->uic_link_state == \
97 				    UIC_LINK_HIBERN8_STATE)
98 #define ufshcd_is_link_broken(hba) ((hba)->uic_link_state == \
99 				   UIC_LINK_BROKEN_STATE)
100 #define ufshcd_set_link_off(hba) ((hba)->uic_link_state = UIC_LINK_OFF_STATE)
101 #define ufshcd_set_link_active(hba) ((hba)->uic_link_state = \
102 				    UIC_LINK_ACTIVE_STATE)
103 #define ufshcd_set_link_hibern8(hba) ((hba)->uic_link_state = \
104 				    UIC_LINK_HIBERN8_STATE)
105 #define ufshcd_set_link_broken(hba) ((hba)->uic_link_state = \
106 				    UIC_LINK_BROKEN_STATE)
107 
108 #define ufshcd_set_ufs_dev_active(h) \
109 	((h)->curr_dev_pwr_mode = UFS_ACTIVE_PWR_MODE)
110 #define ufshcd_set_ufs_dev_sleep(h) \
111 	((h)->curr_dev_pwr_mode = UFS_SLEEP_PWR_MODE)
112 #define ufshcd_set_ufs_dev_poweroff(h) \
113 	((h)->curr_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE)
114 #define ufshcd_set_ufs_dev_deepsleep(h) \
115 	((h)->curr_dev_pwr_mode = UFS_DEEPSLEEP_PWR_MODE)
116 #define ufshcd_is_ufs_dev_active(h) \
117 	((h)->curr_dev_pwr_mode == UFS_ACTIVE_PWR_MODE)
118 #define ufshcd_is_ufs_dev_sleep(h) \
119 	((h)->curr_dev_pwr_mode == UFS_SLEEP_PWR_MODE)
120 #define ufshcd_is_ufs_dev_poweroff(h) \
121 	((h)->curr_dev_pwr_mode == UFS_POWERDOWN_PWR_MODE)
122 #define ufshcd_is_ufs_dev_deepsleep(h) \
123 	((h)->curr_dev_pwr_mode == UFS_DEEPSLEEP_PWR_MODE)
124 
125 /*
126  * UFS Power management levels.
127  * Each level is in increasing order of power savings, except DeepSleep
128  * which is lower than PowerDown with power on but not PowerDown with
129  * power off.
130  */
131 enum ufs_pm_level {
132 	UFS_PM_LVL_0,
133 	UFS_PM_LVL_1,
134 	UFS_PM_LVL_2,
135 	UFS_PM_LVL_3,
136 	UFS_PM_LVL_4,
137 	UFS_PM_LVL_5,
138 	UFS_PM_LVL_6,
139 	UFS_PM_LVL_MAX
140 };
141 
142 struct ufs_pm_lvl_states {
143 	enum ufs_dev_pwr_mode dev_state;
144 	enum uic_link_state link_state;
145 };
146 
147 /**
148  * struct ufshcd_lrb - local reference block
149  * @utr_descriptor_ptr: UTRD address of the command
150  * @ucd_req_ptr: UCD address of the command
151  * @ucd_rsp_ptr: Response UPIU address for this command
152  * @ucd_prdt_ptr: PRDT address of the command
153  * @utrd_dma_addr: UTRD dma address for debug
154  * @ucd_prdt_dma_addr: PRDT dma address for debug
155  * @ucd_rsp_dma_addr: UPIU response dma address for debug
156  * @ucd_req_dma_addr: UPIU request dma address for debug
157  * @cmd: pointer to SCSI command
158  * @scsi_status: SCSI status of the command
159  * @command_type: SCSI, UFS, Query.
160  * @task_tag: Task tag of the command
161  * @lun: LUN of the command
162  * @intr_cmd: Interrupt command (doesn't participate in interrupt aggregation)
163  * @issue_time_stamp: time stamp for debug purposes
164  * @compl_time_stamp: time stamp for statistics
165  * @crypto_key_slot: the key slot to use for inline crypto (-1 if none)
166  * @data_unit_num: the data unit number for the first block for inline crypto
167  * @req_abort_skip: skip request abort task flag
168  */
169 struct ufshcd_lrb {
170 	struct utp_transfer_req_desc *utr_descriptor_ptr;
171 	struct utp_upiu_req *ucd_req_ptr;
172 	struct utp_upiu_rsp *ucd_rsp_ptr;
173 	struct ufshcd_sg_entry *ucd_prdt_ptr;
174 
175 	dma_addr_t utrd_dma_addr;
176 	dma_addr_t ucd_req_dma_addr;
177 	dma_addr_t ucd_rsp_dma_addr;
178 	dma_addr_t ucd_prdt_dma_addr;
179 
180 	struct scsi_cmnd *cmd;
181 	int scsi_status;
182 
183 	int command_type;
184 	int task_tag;
185 	u8 lun; /* UPIU LUN id field is only 8-bit wide */
186 	bool intr_cmd;
187 	ktime_t issue_time_stamp;
188 	ktime_t compl_time_stamp;
189 #ifdef CONFIG_SCSI_UFS_CRYPTO
190 	int crypto_key_slot;
191 	u64 data_unit_num;
192 #endif
193 
194 	bool req_abort_skip;
195 };
196 
197 /**
198  * struct ufs_query - holds relevant data structures for query request
199  * @request: request upiu and function
200  * @descriptor: buffer for sending/receiving descriptor
201  * @response: response upiu and response
202  */
203 struct ufs_query {
204 	struct ufs_query_req request;
205 	u8 *descriptor;
206 	struct ufs_query_res response;
207 };
208 
209 /**
210  * struct ufs_dev_cmd - all assosiated fields with device management commands
211  * @type: device management command type - Query, NOP OUT
212  * @lock: lock to allow one command at a time
213  * @complete: internal commands completion
214  * @query: Device management query information
215  */
216 struct ufs_dev_cmd {
217 	enum dev_cmd_type type;
218 	struct mutex lock;
219 	struct completion *complete;
220 	struct ufs_query query;
221 };
222 
223 /**
224  * struct ufs_clk_info - UFS clock related info
225  * @list: list headed by hba->clk_list_head
226  * @clk: clock node
227  * @name: clock name
228  * @max_freq: maximum frequency supported by the clock
229  * @min_freq: min frequency that can be used for clock scaling
230  * @curr_freq: indicates the current frequency that it is set to
231  * @keep_link_active: indicates that the clk should not be disabled if
232  *		      link is active
233  * @enabled: variable to check against multiple enable/disable
234  */
235 struct ufs_clk_info {
236 	struct list_head list;
237 	struct clk *clk;
238 	const char *name;
239 	u32 max_freq;
240 	u32 min_freq;
241 	u32 curr_freq;
242 	bool keep_link_active;
243 	bool enabled;
244 };
245 
246 enum ufs_notify_change_status {
247 	PRE_CHANGE,
248 	POST_CHANGE,
249 };
250 
251 struct ufs_pa_layer_attr {
252 	u32 gear_rx;
253 	u32 gear_tx;
254 	u32 lane_rx;
255 	u32 lane_tx;
256 	u32 pwr_rx;
257 	u32 pwr_tx;
258 	u32 hs_rate;
259 };
260 
261 struct ufs_pwr_mode_info {
262 	bool is_valid;
263 	struct ufs_pa_layer_attr info;
264 };
265 
266 /**
267  * struct ufs_hba_variant_ops - variant specific callbacks
268  * @name: variant name
269  * @init: called when the driver is initialized
270  * @exit: called to cleanup everything done in init
271  * @get_ufs_hci_version: called to get UFS HCI version
272  * @clk_scale_notify: notifies that clks are scaled up/down
273  * @setup_clocks: called before touching any of the controller registers
274  * @hce_enable_notify: called before and after HCE enable bit is set to allow
275  *                     variant specific Uni-Pro initialization.
276  * @link_startup_notify: called before and after Link startup is carried out
277  *                       to allow variant specific Uni-Pro initialization.
278  * @pwr_change_notify: called before and after a power mode change
279  *			is carried out to allow vendor spesific capabilities
280  *			to be set.
281  * @setup_xfer_req: called before any transfer request is issued
282  *                  to set some things
283  * @setup_task_mgmt: called before any task management request is issued
284  *                  to set some things
285  * @hibern8_notify: called around hibern8 enter/exit
286  * @apply_dev_quirks: called to apply device specific quirks
287  * @fixup_dev_quirks: called to modify device specific quirks
288  * @suspend: called during host controller PM callback
289  * @resume: called during host controller PM callback
290  * @dbg_register_dump: used to dump controller debug information
291  * @phy_initialization: used to initialize phys
292  * @device_reset: called to issue a reset pulse on the UFS device
293  * @config_scaling_param: called to configure clock scaling parameters
294  * @program_key: program or evict an inline encryption key
295  * @event_notify: called to notify important events
296  */
297 struct ufs_hba_variant_ops {
298 	const char *name;
299 	int	(*init)(struct ufs_hba *);
300 	void    (*exit)(struct ufs_hba *);
301 	u32	(*get_ufs_hci_version)(struct ufs_hba *);
302 	int	(*clk_scale_notify)(struct ufs_hba *, bool,
303 				    enum ufs_notify_change_status);
304 	int	(*setup_clocks)(struct ufs_hba *, bool,
305 				enum ufs_notify_change_status);
306 	int	(*hce_enable_notify)(struct ufs_hba *,
307 				     enum ufs_notify_change_status);
308 	int	(*link_startup_notify)(struct ufs_hba *,
309 				       enum ufs_notify_change_status);
310 	int	(*pwr_change_notify)(struct ufs_hba *,
311 					enum ufs_notify_change_status status,
312 					struct ufs_pa_layer_attr *,
313 					struct ufs_pa_layer_attr *);
314 	void	(*setup_xfer_req)(struct ufs_hba *hba, int tag,
315 				  bool is_scsi_cmd);
316 	void	(*setup_task_mgmt)(struct ufs_hba *, int, u8);
317 	void    (*hibern8_notify)(struct ufs_hba *, enum uic_cmd_dme,
318 					enum ufs_notify_change_status);
319 	int	(*apply_dev_quirks)(struct ufs_hba *hba);
320 	void	(*fixup_dev_quirks)(struct ufs_hba *hba);
321 	int     (*suspend)(struct ufs_hba *, enum ufs_pm_op,
322 					enum ufs_notify_change_status);
323 	int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
324 	void	(*dbg_register_dump)(struct ufs_hba *hba);
325 	int	(*phy_initialization)(struct ufs_hba *);
326 	int	(*device_reset)(struct ufs_hba *hba);
327 	void	(*config_scaling_param)(struct ufs_hba *hba,
328 				struct devfreq_dev_profile *profile,
329 				struct devfreq_simple_ondemand_data *data);
330 	int	(*program_key)(struct ufs_hba *hba,
331 			       const union ufs_crypto_cfg_entry *cfg, int slot);
332 	void	(*event_notify)(struct ufs_hba *hba,
333 				enum ufs_event_type evt, void *data);
334 };
335 
336 /* clock gating state  */
337 enum clk_gating_state {
338 	CLKS_OFF,
339 	CLKS_ON,
340 	REQ_CLKS_OFF,
341 	REQ_CLKS_ON,
342 };
343 
344 /**
345  * struct ufs_clk_gating - UFS clock gating related info
346  * @gate_work: worker to turn off clocks after some delay as specified in
347  * delay_ms
348  * @ungate_work: worker to turn on clocks that will be used in case of
349  * interrupt context
350  * @state: the current clocks state
351  * @delay_ms: gating delay in ms
352  * @is_suspended: clk gating is suspended when set to 1 which can be used
353  * during suspend/resume
354  * @delay_attr: sysfs attribute to control delay_attr
355  * @enable_attr: sysfs attribute to enable/disable clock gating
356  * @is_enabled: Indicates the current status of clock gating
357  * @is_initialized: Indicates whether clock gating is initialized or not
358  * @active_reqs: number of requests that are pending and should be waited for
359  * completion before gating clocks.
360  * @clk_gating_workq: workqueue for clock gating work.
361  */
362 struct ufs_clk_gating {
363 	struct delayed_work gate_work;
364 	struct work_struct ungate_work;
365 	enum clk_gating_state state;
366 	unsigned long delay_ms;
367 	bool is_suspended;
368 	struct device_attribute delay_attr;
369 	struct device_attribute enable_attr;
370 	bool is_enabled;
371 	bool is_initialized;
372 	int active_reqs;
373 	struct workqueue_struct *clk_gating_workq;
374 };
375 
376 struct ufs_saved_pwr_info {
377 	struct ufs_pa_layer_attr info;
378 	bool is_valid;
379 };
380 
381 /**
382  * struct ufs_clk_scaling - UFS clock scaling related data
383  * @active_reqs: number of requests that are pending. If this is zero when
384  * devfreq ->target() function is called then schedule "suspend_work" to
385  * suspend devfreq.
386  * @tot_busy_t: Total busy time in current polling window
387  * @window_start_t: Start time (in jiffies) of the current polling window
388  * @busy_start_t: Start time of current busy period
389  * @enable_attr: sysfs attribute to enable/disable clock scaling
390  * @saved_pwr_info: UFS power mode may also be changed during scaling and this
391  * one keeps track of previous power mode.
392  * @workq: workqueue to schedule devfreq suspend/resume work
393  * @suspend_work: worker to suspend devfreq
394  * @resume_work: worker to resume devfreq
395  * @min_gear: lowest HS gear to scale down to
396  * @is_enabled: tracks if scaling is currently enabled or not, controlled by
397  *		clkscale_enable sysfs node
398  * @is_allowed: tracks if scaling is currently allowed or not, used to block
399  *		clock scaling which is not invoked from devfreq governor
400  * @is_initialized: Indicates whether clock scaling is initialized or not
401  * @is_busy_started: tracks if busy period has started or not
402  * @is_suspended: tracks if devfreq is suspended or not
403  */
404 struct ufs_clk_scaling {
405 	int active_reqs;
406 	unsigned long tot_busy_t;
407 	ktime_t window_start_t;
408 	ktime_t busy_start_t;
409 	struct device_attribute enable_attr;
410 	struct ufs_saved_pwr_info saved_pwr_info;
411 	struct workqueue_struct *workq;
412 	struct work_struct suspend_work;
413 	struct work_struct resume_work;
414 	u32 min_gear;
415 	bool is_enabled;
416 	bool is_allowed;
417 	bool is_initialized;
418 	bool is_busy_started;
419 	bool is_suspended;
420 };
421 
422 #define UFS_EVENT_HIST_LENGTH 8
423 /**
424  * struct ufs_event_hist - keeps history of errors
425  * @pos: index to indicate cyclic buffer position
426  * @val: cyclic buffer for registers value
427  * @tstamp: cyclic buffer for time stamp
428  * @cnt: error counter
429  */
430 struct ufs_event_hist {
431 	int pos;
432 	u32 val[UFS_EVENT_HIST_LENGTH];
433 	ktime_t tstamp[UFS_EVENT_HIST_LENGTH];
434 	unsigned long long cnt;
435 };
436 
437 /**
438  * struct ufs_stats - keeps usage/err statistics
439  * @last_intr_status: record the last interrupt status.
440  * @last_intr_ts: record the last interrupt timestamp.
441  * @hibern8_exit_cnt: Counter to keep track of number of exits,
442  *		reset this after link-startup.
443  * @last_hibern8_exit_tstamp: Set time after the hibern8 exit.
444  *		Clear after the first successful command completion.
445  * @event: array with event history.
446  */
447 struct ufs_stats {
448 	u32 last_intr_status;
449 	ktime_t last_intr_ts;
450 
451 	u32 hibern8_exit_cnt;
452 	ktime_t last_hibern8_exit_tstamp;
453 	struct ufs_event_hist event[UFS_EVT_CNT];
454 };
455 
456 /**
457  * enum ufshcd_state - UFS host controller state
458  * @UFSHCD_STATE_RESET: Link is not operational. Postpone SCSI command
459  *	processing.
460  * @UFSHCD_STATE_OPERATIONAL: The host controller is operational and can process
461  *	SCSI commands.
462  * @UFSHCD_STATE_EH_SCHEDULED_NON_FATAL: The error handler has been scheduled.
463  *	SCSI commands may be submitted to the controller.
464  * @UFSHCD_STATE_EH_SCHEDULED_FATAL: The error handler has been scheduled. Fail
465  *	newly submitted SCSI commands with error code DID_BAD_TARGET.
466  * @UFSHCD_STATE_ERROR: An unrecoverable error occurred, e.g. link recovery
467  *	failed. Fail all SCSI commands with error code DID_ERROR.
468  */
469 enum ufshcd_state {
470 	UFSHCD_STATE_RESET,
471 	UFSHCD_STATE_OPERATIONAL,
472 	UFSHCD_STATE_EH_SCHEDULED_NON_FATAL,
473 	UFSHCD_STATE_EH_SCHEDULED_FATAL,
474 	UFSHCD_STATE_ERROR,
475 };
476 
477 enum ufshcd_quirks {
478 	/* Interrupt aggregation support is broken */
479 	UFSHCD_QUIRK_BROKEN_INTR_AGGR			= 1 << 0,
480 
481 	/*
482 	 * delay before each dme command is required as the unipro
483 	 * layer has shown instabilities
484 	 */
485 	UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS		= 1 << 1,
486 
487 	/*
488 	 * If UFS host controller is having issue in processing LCC (Line
489 	 * Control Command) coming from device then enable this quirk.
490 	 * When this quirk is enabled, host controller driver should disable
491 	 * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE
492 	 * attribute of device to 0).
493 	 */
494 	UFSHCD_QUIRK_BROKEN_LCC				= 1 << 2,
495 
496 	/*
497 	 * The attribute PA_RXHSUNTERMCAP specifies whether or not the
498 	 * inbound Link supports unterminated line in HS mode. Setting this
499 	 * attribute to 1 fixes moving to HS gear.
500 	 */
501 	UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP		= 1 << 3,
502 
503 	/*
504 	 * This quirk needs to be enabled if the host controller only allows
505 	 * accessing the peer dme attributes in AUTO mode (FAST AUTO or
506 	 * SLOW AUTO).
507 	 */
508 	UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE		= 1 << 4,
509 
510 	/*
511 	 * This quirk needs to be enabled if the host controller doesn't
512 	 * advertise the correct version in UFS_VER register. If this quirk
513 	 * is enabled, standard UFS host driver will call the vendor specific
514 	 * ops (get_ufs_hci_version) to get the correct version.
515 	 */
516 	UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION		= 1 << 5,
517 
518 	/*
519 	 * Clear handling for transfer/task request list is just opposite.
520 	 */
521 	UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR		= 1 << 6,
522 
523 	/*
524 	 * This quirk needs to be enabled if host controller doesn't allow
525 	 * that the interrupt aggregation timer and counter are reset by s/w.
526 	 */
527 	UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR		= 1 << 7,
528 
529 	/*
530 	 * This quirks needs to be enabled if host controller cannot be
531 	 * enabled via HCE register.
532 	 */
533 	UFSHCI_QUIRK_BROKEN_HCE				= 1 << 8,
534 
535 	/*
536 	 * This quirk needs to be enabled if the host controller regards
537 	 * resolution of the values of PRDTO and PRDTL in UTRD as byte.
538 	 */
539 	UFSHCD_QUIRK_PRDT_BYTE_GRAN			= 1 << 9,
540 
541 	/*
542 	 * This quirk needs to be enabled if the host controller reports
543 	 * OCS FATAL ERROR with device error through sense data
544 	 */
545 	UFSHCD_QUIRK_BROKEN_OCS_FATAL_ERROR		= 1 << 10,
546 
547 	/*
548 	 * This quirk needs to be enabled if the host controller has
549 	 * auto-hibernate capability but it doesn't work.
550 	 */
551 	UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8		= 1 << 11,
552 
553 	/*
554 	 * This quirk needs to disable manual flush for write booster
555 	 */
556 	UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL		= 1 << 12,
557 
558 	/*
559 	 * This quirk needs to disable unipro timeout values
560 	 * before power mode change
561 	 */
562 	UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING = 1 << 13,
563 
564 	/*
565 	 * This quirk allows only sg entries aligned with page size.
566 	 */
567 	UFSHCD_QUIRK_ALIGN_SG_WITH_PAGE_SIZE		= 1 << 14,
568 
569 	/*
570 	 * This quirk needs to be enabled if the host controller does not
571 	 * support UIC command
572 	 */
573 	UFSHCD_QUIRK_BROKEN_UIC_CMD			= 1 << 15,
574 
575 	/*
576 	 * This quirk needs to be enabled if the host controller cannot
577 	 * support physical host configuration.
578 	 */
579 	UFSHCD_QUIRK_SKIP_PH_CONFIGURATION		= 1 << 16,
580 
581 	/*
582 	 * This quirk needs to be enabled if the host controller has
583 	 * 64-bit addressing supported capability but it doesn't work.
584 	 */
585 	UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS		= 1 << 17,
586 
587 	/*
588 	 * This quirk needs to be enabled if the host controller has
589 	 * auto-hibernate capability but it's FASTAUTO only.
590 	 */
591 	UFSHCD_QUIRK_HIBERN_FASTAUTO			= 1 << 18,
592 };
593 
594 enum ufshcd_caps {
595 	/* Allow dynamic clk gating */
596 	UFSHCD_CAP_CLK_GATING				= 1 << 0,
597 
598 	/* Allow hiberb8 with clk gating */
599 	UFSHCD_CAP_HIBERN8_WITH_CLK_GATING		= 1 << 1,
600 
601 	/* Allow dynamic clk scaling */
602 	UFSHCD_CAP_CLK_SCALING				= 1 << 2,
603 
604 	/* Allow auto bkops to enabled during runtime suspend */
605 	UFSHCD_CAP_AUTO_BKOPS_SUSPEND			= 1 << 3,
606 
607 	/*
608 	 * This capability allows host controller driver to use the UFS HCI's
609 	 * interrupt aggregation capability.
610 	 * CAUTION: Enabling this might reduce overall UFS throughput.
611 	 */
612 	UFSHCD_CAP_INTR_AGGR				= 1 << 4,
613 
614 	/*
615 	 * This capability allows the device auto-bkops to be always enabled
616 	 * except during suspend (both runtime and suspend).
617 	 * Enabling this capability means that device will always be allowed
618 	 * to do background operation when it's active but it might degrade
619 	 * the performance of ongoing read/write operations.
620 	 */
621 	UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND = 1 << 5,
622 
623 	/*
624 	 * This capability allows host controller driver to automatically
625 	 * enable runtime power management by itself instead of waiting
626 	 * for userspace to control the power management.
627 	 */
628 	UFSHCD_CAP_RPM_AUTOSUSPEND			= 1 << 6,
629 
630 	/*
631 	 * This capability allows the host controller driver to turn-on
632 	 * WriteBooster, if the underlying device supports it and is
633 	 * provisioned to be used. This would increase the write performance.
634 	 */
635 	UFSHCD_CAP_WB_EN				= 1 << 7,
636 
637 	/*
638 	 * This capability allows the host controller driver to use the
639 	 * inline crypto engine, if it is present
640 	 */
641 	UFSHCD_CAP_CRYPTO				= 1 << 8,
642 
643 	/*
644 	 * This capability allows the controller regulators to be put into
645 	 * lpm mode aggressively during clock gating.
646 	 * This would increase power savings.
647 	 */
648 	UFSHCD_CAP_AGGR_POWER_COLLAPSE			= 1 << 9,
649 
650 	/*
651 	 * This capability allows the host controller driver to use DeepSleep,
652 	 * if it is supported by the UFS device. The host controller driver must
653 	 * support device hardware reset via the hba->device_reset() callback,
654 	 * in order to exit DeepSleep state.
655 	 */
656 	UFSHCD_CAP_DEEPSLEEP				= 1 << 10,
657 
658 	/*
659 	 * This capability allows the host controller driver to use temperature
660 	 * notification if it is supported by the UFS device.
661 	 */
662 	UFSHCD_CAP_TEMP_NOTIF				= 1 << 11,
663 };
664 
665 struct ufs_hba_variant_params {
666 	struct devfreq_dev_profile devfreq_profile;
667 	struct devfreq_simple_ondemand_data ondemand_data;
668 	u16 hba_enable_delay_us;
669 	u32 wb_flush_threshold;
670 };
671 
672 #ifdef CONFIG_SCSI_UFS_HPB
673 /**
674  * struct ufshpb_dev_info - UFSHPB device related info
675  * @num_lu: the number of user logical unit to check whether all lu finished
676  *          initialization
677  * @rgn_size: device reported HPB region size
678  * @srgn_size: device reported HPB sub-region size
679  * @slave_conf_cnt: counter to check all lu finished initialization
680  * @hpb_disabled: flag to check if HPB is disabled
681  * @max_hpb_single_cmd: device reported bMAX_DATA_SIZE_FOR_SINGLE_CMD value
682  * @is_legacy: flag to check HPB 1.0
683  * @control_mode: either host or device
684  */
685 struct ufshpb_dev_info {
686 	int num_lu;
687 	int rgn_size;
688 	int srgn_size;
689 	atomic_t slave_conf_cnt;
690 	bool hpb_disabled;
691 	u8 max_hpb_single_cmd;
692 	bool is_legacy;
693 	u8 control_mode;
694 };
695 #endif
696 
697 struct ufs_hba_monitor {
698 	unsigned long chunk_size;
699 
700 	unsigned long nr_sec_rw[2];
701 	ktime_t total_busy[2];
702 
703 	unsigned long nr_req[2];
704 	/* latencies*/
705 	ktime_t lat_sum[2];
706 	ktime_t lat_max[2];
707 	ktime_t lat_min[2];
708 
709 	u32 nr_queued[2];
710 	ktime_t busy_start_ts[2];
711 
712 	ktime_t enabled_ts;
713 	bool enabled;
714 };
715 
716 /**
717  * struct ufs_hba - per adapter private structure
718  * @mmio_base: UFSHCI base register address
719  * @ucdl_base_addr: UFS Command Descriptor base address
720  * @utrdl_base_addr: UTP Transfer Request Descriptor base address
721  * @utmrdl_base_addr: UTP Task Management Descriptor base address
722  * @ucdl_dma_addr: UFS Command Descriptor DMA address
723  * @utrdl_dma_addr: UTRDL DMA address
724  * @utmrdl_dma_addr: UTMRDL DMA address
725  * @host: Scsi_Host instance of the driver
726  * @dev: device handle
727  * @ufs_device_wlun: WLUN that controls the entire UFS device.
728  * @hwmon_device: device instance registered with the hwmon core.
729  * @curr_dev_pwr_mode: active UFS device power mode.
730  * @uic_link_state: active state of the link to the UFS device.
731  * @rpm_lvl: desired UFS power management level during runtime PM.
732  * @spm_lvl: desired UFS power management level during system PM.
733  * @pm_op_in_progress: whether or not a PM operation is in progress.
734  * @ahit: value of Auto-Hibernate Idle Timer register.
735  * @lrb: local reference block
736  * @outstanding_tasks: Bits representing outstanding task requests
737  * @outstanding_lock: Protects @outstanding_reqs.
738  * @outstanding_reqs: Bits representing outstanding transfer requests
739  * @capabilities: UFS Controller Capabilities
740  * @nutrs: Transfer Request Queue depth supported by controller
741  * @nutmrs: Task Management Queue depth supported by controller
742  * @reserved_slot: Used to submit device commands. Protected by @dev_cmd.lock.
743  * @ufs_version: UFS Version to which controller complies
744  * @vops: pointer to variant specific operations
745  * @vps: pointer to variant specific parameters
746  * @priv: pointer to variant specific private data
747  * @irq: Irq number of the controller
748  * @is_irq_enabled: whether or not the UFS controller interrupt is enabled.
749  * @dev_ref_clk_freq: reference clock frequency
750  * @quirks: bitmask with information about deviations from the UFSHCI standard.
751  * @dev_quirks: bitmask with information about deviations from the UFS standard.
752  * @tmf_tag_set: TMF tag set.
753  * @tmf_queue: Used to allocate TMF tags.
754  * @tmf_rqs: array with pointers to TMF requests while these are in progress.
755  * @active_uic_cmd: handle of active UIC command
756  * @uic_cmd_mutex: mutex for UIC command
757  * @uic_async_done: completion used during UIC processing
758  * @ufshcd_state: UFSHCD state
759  * @eh_flags: Error handling flags
760  * @intr_mask: Interrupt Mask Bits
761  * @ee_ctrl_mask: Exception event control mask
762  * @ee_drv_mask: Exception event mask for driver
763  * @ee_usr_mask: Exception event mask for user (set via debugfs)
764  * @ee_ctrl_mutex: Used to serialize exception event information.
765  * @is_powered: flag to check if HBA is powered
766  * @shutting_down: flag to check if shutdown has been invoked
767  * @host_sem: semaphore used to serialize concurrent contexts
768  * @eh_wq: Workqueue that eh_work works on
769  * @eh_work: Worker to handle UFS errors that require s/w attention
770  * @eeh_work: Worker to handle exception events
771  * @errors: HBA errors
772  * @uic_error: UFS interconnect layer error status
773  * @saved_err: sticky error mask
774  * @saved_uic_err: sticky UIC error mask
775  * @ufs_stats: various error counters
776  * @force_reset: flag to force eh_work perform a full reset
777  * @force_pmc: flag to force a power mode change
778  * @silence_err_logs: flag to silence error logs
779  * @dev_cmd: ufs device management command information
780  * @last_dme_cmd_tstamp: time stamp of the last completed DME command
781  * @nop_out_timeout: NOP OUT timeout value
782  * @dev_info: information about the UFS device
783  * @auto_bkops_enabled: to track whether bkops is enabled in device
784  * @vreg_info: UFS device voltage regulator information
785  * @clk_list_head: UFS host controller clocks list node head
786  * @req_abort_count: number of times ufshcd_abort() has been called
787  * @lanes_per_direction: number of lanes per data direction between the UFS
788  *	controller and the UFS device.
789  * @pwr_info: holds current power mode
790  * @max_pwr_info: keeps the device max valid pwm
791  * @clk_gating: information related to clock gating
792  * @caps: bitmask with information about UFS controller capabilities
793  * @devfreq: frequency scaling information owned by the devfreq core
794  * @clk_scaling: frequency scaling information owned by the UFS driver
795  * @is_sys_suspended: whether or not the entire system has been suspended
796  * @urgent_bkops_lvl: keeps track of urgent bkops level for device
797  * @is_urgent_bkops_lvl_checked: keeps track if the urgent bkops level for
798  *  device is known or not.
799  * @clk_scaling_lock: used to serialize device commands and clock scaling
800  * @desc_size: descriptor sizes reported by device
801  * @scsi_block_reqs_cnt: reference counting for scsi block requests
802  * @bsg_dev: struct device associated with the BSG queue
803  * @bsg_queue: BSG queue associated with the UFS controller
804  * @rpm_dev_flush_recheck_work: used to suspend from RPM (runtime power
805  *	management) after the UFS device has finished a WriteBooster buffer
806  *	flush or auto BKOP.
807  * @ufshpb_dev: information related to HPB (Host Performance Booster).
808  * @monitor: statistics about UFS commands
809  * @crypto_capabilities: Content of crypto capabilities register (0x100)
810  * @crypto_cap_array: Array of crypto capabilities
811  * @crypto_cfg_register: Start of the crypto cfg array
812  * @crypto_profile: the crypto profile of this hba (if applicable)
813  * @debugfs_root: UFS controller debugfs root directory
814  * @debugfs_ee_work: used to restore ee_ctrl_mask after a delay
815  * @debugfs_ee_rate_limit_ms: user configurable delay after which to restore
816  *	ee_ctrl_mask
817  * @luns_avail: number of regular and well known LUNs supported by the UFS
818  *	device
819  * @complete_put: whether or not to call ufshcd_rpm_put() from inside
820  *	ufshcd_resume_complete()
821  */
822 struct ufs_hba {
823 	void __iomem *mmio_base;
824 
825 	/* Virtual memory reference */
826 	struct utp_transfer_cmd_desc *ucdl_base_addr;
827 	struct utp_transfer_req_desc *utrdl_base_addr;
828 	struct utp_task_req_desc *utmrdl_base_addr;
829 
830 	/* DMA memory reference */
831 	dma_addr_t ucdl_dma_addr;
832 	dma_addr_t utrdl_dma_addr;
833 	dma_addr_t utmrdl_dma_addr;
834 
835 	struct Scsi_Host *host;
836 	struct device *dev;
837 	struct scsi_device *ufs_device_wlun;
838 
839 #ifdef CONFIG_SCSI_UFS_HWMON
840 	struct device *hwmon_device;
841 #endif
842 
843 	enum ufs_dev_pwr_mode curr_dev_pwr_mode;
844 	enum uic_link_state uic_link_state;
845 	/* Desired UFS power management level during runtime PM */
846 	enum ufs_pm_level rpm_lvl;
847 	/* Desired UFS power management level during system PM */
848 	enum ufs_pm_level spm_lvl;
849 	int pm_op_in_progress;
850 
851 	/* Auto-Hibernate Idle Timer register value */
852 	u32 ahit;
853 
854 	struct ufshcd_lrb *lrb;
855 
856 	unsigned long outstanding_tasks;
857 	spinlock_t outstanding_lock;
858 	unsigned long outstanding_reqs;
859 
860 	u32 capabilities;
861 	int nutrs;
862 	int nutmrs;
863 	u32 reserved_slot;
864 	u32 ufs_version;
865 	const struct ufs_hba_variant_ops *vops;
866 	struct ufs_hba_variant_params *vps;
867 	void *priv;
868 	unsigned int irq;
869 	bool is_irq_enabled;
870 	enum ufs_ref_clk_freq dev_ref_clk_freq;
871 
872 	unsigned int quirks;	/* Deviations from standard UFSHCI spec. */
873 
874 	/* Device deviations from standard UFS device spec. */
875 	unsigned int dev_quirks;
876 
877 	struct blk_mq_tag_set tmf_tag_set;
878 	struct request_queue *tmf_queue;
879 	struct request **tmf_rqs;
880 
881 	struct uic_command *active_uic_cmd;
882 	struct mutex uic_cmd_mutex;
883 	struct completion *uic_async_done;
884 
885 	enum ufshcd_state ufshcd_state;
886 	u32 eh_flags;
887 	u32 intr_mask;
888 	u16 ee_ctrl_mask;
889 	u16 ee_drv_mask;
890 	u16 ee_usr_mask;
891 	struct mutex ee_ctrl_mutex;
892 	bool is_powered;
893 	bool shutting_down;
894 	struct semaphore host_sem;
895 
896 	/* Work Queues */
897 	struct workqueue_struct *eh_wq;
898 	struct work_struct eh_work;
899 	struct work_struct eeh_work;
900 
901 	/* HBA Errors */
902 	u32 errors;
903 	u32 uic_error;
904 	u32 saved_err;
905 	u32 saved_uic_err;
906 	struct ufs_stats ufs_stats;
907 	bool force_reset;
908 	bool force_pmc;
909 	bool silence_err_logs;
910 
911 	/* Device management request data */
912 	struct ufs_dev_cmd dev_cmd;
913 	ktime_t last_dme_cmd_tstamp;
914 	int nop_out_timeout;
915 
916 	/* Keeps information of the UFS device connected to this host */
917 	struct ufs_dev_info dev_info;
918 	bool auto_bkops_enabled;
919 	struct ufs_vreg_info vreg_info;
920 	struct list_head clk_list_head;
921 
922 	/* Number of requests aborts */
923 	int req_abort_count;
924 
925 	/* Number of lanes available (1 or 2) for Rx/Tx */
926 	u32 lanes_per_direction;
927 	struct ufs_pa_layer_attr pwr_info;
928 	struct ufs_pwr_mode_info max_pwr_info;
929 
930 	struct ufs_clk_gating clk_gating;
931 	/* Control to enable/disable host capabilities */
932 	u32 caps;
933 
934 	struct devfreq *devfreq;
935 	struct ufs_clk_scaling clk_scaling;
936 	bool is_sys_suspended;
937 
938 	enum bkops_status urgent_bkops_lvl;
939 	bool is_urgent_bkops_lvl_checked;
940 
941 	struct rw_semaphore clk_scaling_lock;
942 	unsigned char desc_size[QUERY_DESC_IDN_MAX];
943 	atomic_t scsi_block_reqs_cnt;
944 
945 	struct device		bsg_dev;
946 	struct request_queue	*bsg_queue;
947 	struct delayed_work rpm_dev_flush_recheck_work;
948 
949 #ifdef CONFIG_SCSI_UFS_HPB
950 	struct ufshpb_dev_info ufshpb_dev;
951 #endif
952 
953 	struct ufs_hba_monitor	monitor;
954 
955 #ifdef CONFIG_SCSI_UFS_CRYPTO
956 	union ufs_crypto_capabilities crypto_capabilities;
957 	union ufs_crypto_cap_entry *crypto_cap_array;
958 	u32 crypto_cfg_register;
959 	struct blk_crypto_profile crypto_profile;
960 #endif
961 #ifdef CONFIG_DEBUG_FS
962 	struct dentry *debugfs_root;
963 	struct delayed_work debugfs_ee_work;
964 	u32 debugfs_ee_rate_limit_ms;
965 #endif
966 	u32 luns_avail;
967 	bool complete_put;
968 };
969 
970 /* Returns true if clocks can be gated. Otherwise false */
971 static inline bool ufshcd_is_clkgating_allowed(struct ufs_hba *hba)
972 {
973 	return hba->caps & UFSHCD_CAP_CLK_GATING;
974 }
975 static inline bool ufshcd_can_hibern8_during_gating(struct ufs_hba *hba)
976 {
977 	return hba->caps & UFSHCD_CAP_HIBERN8_WITH_CLK_GATING;
978 }
979 static inline int ufshcd_is_clkscaling_supported(struct ufs_hba *hba)
980 {
981 	return hba->caps & UFSHCD_CAP_CLK_SCALING;
982 }
983 static inline bool ufshcd_can_autobkops_during_suspend(struct ufs_hba *hba)
984 {
985 	return hba->caps & UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
986 }
987 static inline bool ufshcd_is_rpm_autosuspend_allowed(struct ufs_hba *hba)
988 {
989 	return hba->caps & UFSHCD_CAP_RPM_AUTOSUSPEND;
990 }
991 
992 static inline bool ufshcd_is_intr_aggr_allowed(struct ufs_hba *hba)
993 {
994 	return (hba->caps & UFSHCD_CAP_INTR_AGGR) &&
995 		!(hba->quirks & UFSHCD_QUIRK_BROKEN_INTR_AGGR);
996 }
997 
998 static inline bool ufshcd_can_aggressive_pc(struct ufs_hba *hba)
999 {
1000 	return !!(ufshcd_is_link_hibern8(hba) &&
1001 		  (hba->caps & UFSHCD_CAP_AGGR_POWER_COLLAPSE));
1002 }
1003 
1004 static inline bool ufshcd_is_auto_hibern8_supported(struct ufs_hba *hba)
1005 {
1006 	return (hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT) &&
1007 		!(hba->quirks & UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8);
1008 }
1009 
1010 static inline bool ufshcd_is_auto_hibern8_enabled(struct ufs_hba *hba)
1011 {
1012 	return FIELD_GET(UFSHCI_AHIBERN8_TIMER_MASK, hba->ahit);
1013 }
1014 
1015 static inline bool ufshcd_is_wb_allowed(struct ufs_hba *hba)
1016 {
1017 	return hba->caps & UFSHCD_CAP_WB_EN;
1018 }
1019 
1020 #define ufshcd_writel(hba, val, reg)	\
1021 	writel((val), (hba)->mmio_base + (reg))
1022 #define ufshcd_readl(hba, reg)	\
1023 	readl((hba)->mmio_base + (reg))
1024 
1025 /**
1026  * ufshcd_rmwl - perform read/modify/write for a controller register
1027  * @hba: per adapter instance
1028  * @mask: mask to apply on read value
1029  * @val: actual value to write
1030  * @reg: register address
1031  */
1032 static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg)
1033 {
1034 	u32 tmp;
1035 
1036 	tmp = ufshcd_readl(hba, reg);
1037 	tmp &= ~mask;
1038 	tmp |= (val & mask);
1039 	ufshcd_writel(hba, tmp, reg);
1040 }
1041 
1042 int ufshcd_alloc_host(struct device *, struct ufs_hba **);
1043 void ufshcd_dealloc_host(struct ufs_hba *);
1044 int ufshcd_hba_enable(struct ufs_hba *hba);
1045 int ufshcd_init(struct ufs_hba *, void __iomem *, unsigned int);
1046 int ufshcd_link_recovery(struct ufs_hba *hba);
1047 int ufshcd_make_hba_operational(struct ufs_hba *hba);
1048 void ufshcd_remove(struct ufs_hba *);
1049 int ufshcd_uic_hibern8_enter(struct ufs_hba *hba);
1050 int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
1051 void ufshcd_delay_us(unsigned long us, unsigned long tolerance);
1052 void ufshcd_parse_dev_ref_clk_freq(struct ufs_hba *hba, struct clk *refclk);
1053 void ufshcd_update_evt_hist(struct ufs_hba *hba, u32 id, u32 val);
1054 void ufshcd_hba_stop(struct ufs_hba *hba);
1055 void ufshcd_schedule_eh_work(struct ufs_hba *hba);
1056 
1057 static inline void check_upiu_size(void)
1058 {
1059 	BUILD_BUG_ON(ALIGNED_UPIU_SIZE <
1060 		GENERAL_UPIU_REQUEST_SIZE + QUERY_DESC_MAX_SIZE);
1061 }
1062 
1063 /**
1064  * ufshcd_set_variant - set variant specific data to the hba
1065  * @hba: per adapter instance
1066  * @variant: pointer to variant specific data
1067  */
1068 static inline void ufshcd_set_variant(struct ufs_hba *hba, void *variant)
1069 {
1070 	BUG_ON(!hba);
1071 	hba->priv = variant;
1072 }
1073 
1074 /**
1075  * ufshcd_get_variant - get variant specific data from the hba
1076  * @hba: per adapter instance
1077  */
1078 static inline void *ufshcd_get_variant(struct ufs_hba *hba)
1079 {
1080 	BUG_ON(!hba);
1081 	return hba->priv;
1082 }
1083 
1084 #ifdef CONFIG_PM
1085 extern int ufshcd_runtime_suspend(struct device *dev);
1086 extern int ufshcd_runtime_resume(struct device *dev);
1087 #endif
1088 #ifdef CONFIG_PM_SLEEP
1089 extern int ufshcd_system_suspend(struct device *dev);
1090 extern int ufshcd_system_resume(struct device *dev);
1091 #endif
1092 extern int ufshcd_shutdown(struct ufs_hba *hba);
1093 extern int ufshcd_dme_configure_adapt(struct ufs_hba *hba,
1094 				      int agreed_gear,
1095 				      int adapt_val);
1096 extern int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel,
1097 			       u8 attr_set, u32 mib_val, u8 peer);
1098 extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
1099 			       u32 *mib_val, u8 peer);
1100 extern int ufshcd_config_pwr_mode(struct ufs_hba *hba,
1101 			struct ufs_pa_layer_attr *desired_pwr_mode);
1102 extern int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode);
1103 
1104 /* UIC command interfaces for DME primitives */
1105 #define DME_LOCAL	0
1106 #define DME_PEER	1
1107 #define ATTR_SET_NOR	0	/* NORMAL */
1108 #define ATTR_SET_ST	1	/* STATIC */
1109 
1110 static inline int ufshcd_dme_set(struct ufs_hba *hba, u32 attr_sel,
1111 				 u32 mib_val)
1112 {
1113 	return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
1114 				   mib_val, DME_LOCAL);
1115 }
1116 
1117 static inline int ufshcd_dme_st_set(struct ufs_hba *hba, u32 attr_sel,
1118 				    u32 mib_val)
1119 {
1120 	return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
1121 				   mib_val, DME_LOCAL);
1122 }
1123 
1124 static inline int ufshcd_dme_peer_set(struct ufs_hba *hba, u32 attr_sel,
1125 				      u32 mib_val)
1126 {
1127 	return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
1128 				   mib_val, DME_PEER);
1129 }
1130 
1131 static inline int ufshcd_dme_peer_st_set(struct ufs_hba *hba, u32 attr_sel,
1132 					 u32 mib_val)
1133 {
1134 	return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
1135 				   mib_val, DME_PEER);
1136 }
1137 
1138 static inline int ufshcd_dme_get(struct ufs_hba *hba,
1139 				 u32 attr_sel, u32 *mib_val)
1140 {
1141 	return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_LOCAL);
1142 }
1143 
1144 static inline int ufshcd_dme_peer_get(struct ufs_hba *hba,
1145 				      u32 attr_sel, u32 *mib_val)
1146 {
1147 	return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_PEER);
1148 }
1149 
1150 static inline bool ufshcd_is_hs_mode(struct ufs_pa_layer_attr *pwr_info)
1151 {
1152 	return (pwr_info->pwr_rx == FAST_MODE ||
1153 		pwr_info->pwr_rx == FASTAUTO_MODE) &&
1154 		(pwr_info->pwr_tx == FAST_MODE ||
1155 		pwr_info->pwr_tx == FASTAUTO_MODE);
1156 }
1157 
1158 static inline int ufshcd_disable_host_tx_lcc(struct ufs_hba *hba)
1159 {
1160 	return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0);
1161 }
1162 
1163 /* Expose Query-Request API */
1164 int ufshcd_query_descriptor_retry(struct ufs_hba *hba,
1165 				  enum query_opcode opcode,
1166 				  enum desc_idn idn, u8 index,
1167 				  u8 selector,
1168 				  u8 *desc_buf, int *buf_len);
1169 int ufshcd_read_desc_param(struct ufs_hba *hba,
1170 			   enum desc_idn desc_id,
1171 			   int desc_index,
1172 			   u8 param_offset,
1173 			   u8 *param_read_buf,
1174 			   u8 param_size);
1175 int ufshcd_query_attr_retry(struct ufs_hba *hba, enum query_opcode opcode,
1176 			    enum attr_idn idn, u8 index, u8 selector,
1177 			    u32 *attr_val);
1178 int ufshcd_query_attr(struct ufs_hba *hba, enum query_opcode opcode,
1179 		      enum attr_idn idn, u8 index, u8 selector, u32 *attr_val);
1180 int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode,
1181 	enum flag_idn idn, u8 index, bool *flag_res);
1182 
1183 void ufshcd_auto_hibern8_enable(struct ufs_hba *hba);
1184 void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit);
1185 void ufshcd_fixup_dev_quirks(struct ufs_hba *hba,
1186 			     const struct ufs_dev_quirk *fixups);
1187 #define SD_ASCII_STD true
1188 #define SD_RAW false
1189 int ufshcd_read_string_desc(struct ufs_hba *hba, u8 desc_index,
1190 			    u8 **buf, bool ascii);
1191 
1192 int ufshcd_hold(struct ufs_hba *hba, bool async);
1193 void ufshcd_release(struct ufs_hba *hba);
1194 
1195 void ufshcd_clkgate_delay_set(struct device *dev, unsigned long value);
1196 
1197 void ufshcd_map_desc_id_to_length(struct ufs_hba *hba, enum desc_idn desc_id,
1198 				  int *desc_length);
1199 
1200 u32 ufshcd_get_local_unipro_ver(struct ufs_hba *hba);
1201 
1202 int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg);
1203 
1204 int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd);
1205 
1206 int ufshcd_exec_raw_upiu_cmd(struct ufs_hba *hba,
1207 			     struct utp_upiu_req *req_upiu,
1208 			     struct utp_upiu_req *rsp_upiu,
1209 			     int msgcode,
1210 			     u8 *desc_buff, int *buff_len,
1211 			     enum query_opcode desc_op);
1212 
1213 int ufshcd_wb_toggle(struct ufs_hba *hba, bool enable);
1214 int ufshcd_suspend_prepare(struct device *dev);
1215 int __ufshcd_suspend_prepare(struct device *dev, bool rpm_ok_for_spm);
1216 void ufshcd_resume_complete(struct device *dev);
1217 
1218 /* Wrapper functions for safely calling variant operations */
1219 static inline int ufshcd_vops_init(struct ufs_hba *hba)
1220 {
1221 	if (hba->vops && hba->vops->init)
1222 		return hba->vops->init(hba);
1223 
1224 	return 0;
1225 }
1226 
1227 static inline int ufshcd_vops_phy_initialization(struct ufs_hba *hba)
1228 {
1229 	if (hba->vops && hba->vops->phy_initialization)
1230 		return hba->vops->phy_initialization(hba);
1231 
1232 	return 0;
1233 }
1234 
1235 extern const struct ufs_pm_lvl_states ufs_pm_lvl_states[];
1236 
1237 int ufshcd_dump_regs(struct ufs_hba *hba, size_t offset, size_t len,
1238 		     const char *prefix);
1239 
1240 int __ufshcd_write_ee_control(struct ufs_hba *hba, u32 ee_ctrl_mask);
1241 int ufshcd_write_ee_control(struct ufs_hba *hba);
1242 int ufshcd_update_ee_control(struct ufs_hba *hba, u16 *mask,
1243 			     const u16 *other_mask, u16 set, u16 clr);
1244 
1245 #endif /* End of Header */
1246