1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 /* 3 * Universal Flash Storage Host controller driver 4 * Copyright (C) 2011-2013 Samsung India Software Operations 5 * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. 6 * 7 * Authors: 8 * Santosh Yaraganavi <santosh.sy@samsung.com> 9 * Vinayak Holikatti <h.vinayak@samsung.com> 10 */ 11 12 #ifndef _UFSHCD_H 13 #define _UFSHCD_H 14 15 #include <linux/bitfield.h> 16 #include <linux/blk-crypto-profile.h> 17 #include <linux/blk-mq.h> 18 #include <linux/devfreq.h> 19 #include <linux/fault-inject.h> 20 #include <linux/debugfs.h> 21 #include <linux/msi.h> 22 #include <linux/pm_runtime.h> 23 #include <linux/dma-direction.h> 24 #include <scsi/scsi_device.h> 25 #include <scsi/scsi_host.h> 26 #include <ufs/unipro.h> 27 #include <ufs/ufs.h> 28 #include <ufs/ufs_quirks.h> 29 #include <ufs/ufshci.h> 30 31 #define UFSHCD "ufshcd" 32 33 struct scsi_device; 34 struct ufs_hba; 35 36 enum dev_cmd_type { 37 DEV_CMD_TYPE_NOP = 0x0, 38 DEV_CMD_TYPE_QUERY = 0x1, 39 DEV_CMD_TYPE_RPMB = 0x2, 40 }; 41 42 enum ufs_event_type { 43 /* uic specific errors */ 44 UFS_EVT_PA_ERR = 0, 45 UFS_EVT_DL_ERR, 46 UFS_EVT_NL_ERR, 47 UFS_EVT_TL_ERR, 48 UFS_EVT_DME_ERR, 49 50 /* fatal errors */ 51 UFS_EVT_AUTO_HIBERN8_ERR, 52 UFS_EVT_FATAL_ERR, 53 UFS_EVT_LINK_STARTUP_FAIL, 54 UFS_EVT_RESUME_ERR, 55 UFS_EVT_SUSPEND_ERR, 56 UFS_EVT_WL_SUSP_ERR, 57 UFS_EVT_WL_RES_ERR, 58 59 /* abnormal events */ 60 UFS_EVT_DEV_RESET, 61 UFS_EVT_HOST_RESET, 62 UFS_EVT_ABORT, 63 64 UFS_EVT_CNT, 65 }; 66 67 /** 68 * struct uic_command - UIC command structure 69 * @command: UIC command 70 * @argument1: UIC command argument 1 71 * @argument2: UIC command argument 2 72 * @argument3: UIC command argument 3 73 * @cmd_active: Indicate if UIC command is outstanding 74 * @done: UIC command completion 75 */ 76 struct uic_command { 77 const u32 command; 78 const u32 argument1; 79 u32 argument2; 80 u32 argument3; 81 int cmd_active; 82 struct completion done; 83 }; 84 85 /* Used to differentiate the power management options */ 86 enum ufs_pm_op { 87 UFS_RUNTIME_PM, 88 UFS_SYSTEM_PM, 89 UFS_SHUTDOWN_PM, 90 }; 91 92 /* Host <-> Device UniPro Link state */ 93 enum uic_link_state { 94 UIC_LINK_OFF_STATE = 0, /* Link powered down or disabled */ 95 UIC_LINK_ACTIVE_STATE = 1, /* Link is in Fast/Slow/Sleep state */ 96 UIC_LINK_HIBERN8_STATE = 2, /* Link is in Hibernate state */ 97 UIC_LINK_BROKEN_STATE = 3, /* Link is in broken state */ 98 }; 99 100 #define ufshcd_is_link_off(hba) ((hba)->uic_link_state == UIC_LINK_OFF_STATE) 101 #define ufshcd_is_link_active(hba) ((hba)->uic_link_state == \ 102 UIC_LINK_ACTIVE_STATE) 103 #define ufshcd_is_link_hibern8(hba) ((hba)->uic_link_state == \ 104 UIC_LINK_HIBERN8_STATE) 105 #define ufshcd_is_link_broken(hba) ((hba)->uic_link_state == \ 106 UIC_LINK_BROKEN_STATE) 107 #define ufshcd_set_link_off(hba) ((hba)->uic_link_state = UIC_LINK_OFF_STATE) 108 #define ufshcd_set_link_active(hba) ((hba)->uic_link_state = \ 109 UIC_LINK_ACTIVE_STATE) 110 #define ufshcd_set_link_hibern8(hba) ((hba)->uic_link_state = \ 111 UIC_LINK_HIBERN8_STATE) 112 #define ufshcd_set_link_broken(hba) ((hba)->uic_link_state = \ 113 UIC_LINK_BROKEN_STATE) 114 115 #define ufshcd_set_ufs_dev_active(h) \ 116 ((h)->curr_dev_pwr_mode = UFS_ACTIVE_PWR_MODE) 117 #define ufshcd_set_ufs_dev_sleep(h) \ 118 ((h)->curr_dev_pwr_mode = UFS_SLEEP_PWR_MODE) 119 #define ufshcd_set_ufs_dev_poweroff(h) \ 120 ((h)->curr_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE) 121 #define ufshcd_set_ufs_dev_deepsleep(h) \ 122 ((h)->curr_dev_pwr_mode = UFS_DEEPSLEEP_PWR_MODE) 123 #define ufshcd_is_ufs_dev_active(h) \ 124 ((h)->curr_dev_pwr_mode == UFS_ACTIVE_PWR_MODE) 125 #define ufshcd_is_ufs_dev_sleep(h) \ 126 ((h)->curr_dev_pwr_mode == UFS_SLEEP_PWR_MODE) 127 #define ufshcd_is_ufs_dev_poweroff(h) \ 128 ((h)->curr_dev_pwr_mode == UFS_POWERDOWN_PWR_MODE) 129 #define ufshcd_is_ufs_dev_deepsleep(h) \ 130 ((h)->curr_dev_pwr_mode == UFS_DEEPSLEEP_PWR_MODE) 131 132 /* 133 * UFS Power management levels. 134 * Each level is in increasing order of power savings, except DeepSleep 135 * which is lower than PowerDown with power on but not PowerDown with 136 * power off. 137 */ 138 enum ufs_pm_level { 139 UFS_PM_LVL_0, 140 UFS_PM_LVL_1, 141 UFS_PM_LVL_2, 142 UFS_PM_LVL_3, 143 UFS_PM_LVL_4, 144 UFS_PM_LVL_5, 145 UFS_PM_LVL_6, 146 UFS_PM_LVL_MAX 147 }; 148 149 struct ufs_pm_lvl_states { 150 enum ufs_dev_pwr_mode dev_state; 151 enum uic_link_state link_state; 152 }; 153 154 /** 155 * struct ufshcd_lrb - local reference block 156 * @utr_descriptor_ptr: UTRD address of the command 157 * @ucd_req_ptr: UCD address of the command 158 * @ucd_rsp_ptr: Response UPIU address for this command 159 * @ucd_prdt_ptr: PRDT address of the command 160 * @utrd_dma_addr: UTRD dma address for debug 161 * @ucd_prdt_dma_addr: PRDT dma address for debug 162 * @ucd_rsp_dma_addr: UPIU response dma address for debug 163 * @ucd_req_dma_addr: UPIU request dma address for debug 164 * @cmd: pointer to SCSI command 165 * @scsi_status: SCSI status of the command 166 * @command_type: SCSI, UFS, Query. 167 * @task_tag: Task tag of the command 168 * @lun: LUN of the command 169 * @intr_cmd: Interrupt command (doesn't participate in interrupt aggregation) 170 * @issue_time_stamp: time stamp for debug purposes (CLOCK_MONOTONIC) 171 * @issue_time_stamp_local_clock: time stamp for debug purposes (local_clock) 172 * @compl_time_stamp: time stamp for statistics (CLOCK_MONOTONIC) 173 * @compl_time_stamp_local_clock: time stamp for debug purposes (local_clock) 174 * @crypto_key_slot: the key slot to use for inline crypto (-1 if none) 175 * @data_unit_num: the data unit number for the first block for inline crypto 176 * @req_abort_skip: skip request abort task flag 177 */ 178 struct ufshcd_lrb { 179 struct utp_transfer_req_desc *utr_descriptor_ptr; 180 struct utp_upiu_req *ucd_req_ptr; 181 struct utp_upiu_rsp *ucd_rsp_ptr; 182 struct ufshcd_sg_entry *ucd_prdt_ptr; 183 184 dma_addr_t utrd_dma_addr; 185 dma_addr_t ucd_req_dma_addr; 186 dma_addr_t ucd_rsp_dma_addr; 187 dma_addr_t ucd_prdt_dma_addr; 188 189 struct scsi_cmnd *cmd; 190 int scsi_status; 191 192 int command_type; 193 int task_tag; 194 u8 lun; /* UPIU LUN id field is only 8-bit wide */ 195 bool intr_cmd; 196 ktime_t issue_time_stamp; 197 u64 issue_time_stamp_local_clock; 198 ktime_t compl_time_stamp; 199 u64 compl_time_stamp_local_clock; 200 #ifdef CONFIG_SCSI_UFS_CRYPTO 201 int crypto_key_slot; 202 u64 data_unit_num; 203 #endif 204 205 bool req_abort_skip; 206 }; 207 208 /** 209 * struct ufs_query_req - parameters for building a query request 210 * @query_func: UPIU header query function 211 * @upiu_req: the query request data 212 */ 213 struct ufs_query_req { 214 u8 query_func; 215 struct utp_upiu_query upiu_req; 216 }; 217 218 /** 219 * struct ufs_query_resp - UPIU QUERY 220 * @response: device response code 221 * @upiu_res: query response data 222 */ 223 struct ufs_query_res { 224 struct utp_upiu_query upiu_res; 225 }; 226 227 /** 228 * struct ufs_query - holds relevant data structures for query request 229 * @request: request upiu and function 230 * @descriptor: buffer for sending/receiving descriptor 231 * @response: response upiu and response 232 */ 233 struct ufs_query { 234 struct ufs_query_req request; 235 u8 *descriptor; 236 struct ufs_query_res response; 237 }; 238 239 /** 240 * struct ufs_dev_cmd - all assosiated fields with device management commands 241 * @type: device management command type - Query, NOP OUT 242 * @lock: lock to allow one command at a time 243 * @complete: internal commands completion 244 * @query: Device management query information 245 */ 246 struct ufs_dev_cmd { 247 enum dev_cmd_type type; 248 struct mutex lock; 249 struct completion *complete; 250 struct ufs_query query; 251 }; 252 253 /** 254 * struct ufs_clk_info - UFS clock related info 255 * @list: list headed by hba->clk_list_head 256 * @clk: clock node 257 * @name: clock name 258 * @max_freq: maximum frequency supported by the clock 259 * @min_freq: min frequency that can be used for clock scaling 260 * @curr_freq: indicates the current frequency that it is set to 261 * @keep_link_active: indicates that the clk should not be disabled if 262 * link is active 263 * @enabled: variable to check against multiple enable/disable 264 */ 265 struct ufs_clk_info { 266 struct list_head list; 267 struct clk *clk; 268 const char *name; 269 u32 max_freq; 270 u32 min_freq; 271 u32 curr_freq; 272 bool keep_link_active; 273 bool enabled; 274 }; 275 276 enum ufs_notify_change_status { 277 PRE_CHANGE, 278 POST_CHANGE, 279 }; 280 281 struct ufs_pa_layer_attr { 282 u32 gear_rx; 283 u32 gear_tx; 284 u32 lane_rx; 285 u32 lane_tx; 286 u32 pwr_rx; 287 u32 pwr_tx; 288 u32 hs_rate; 289 }; 290 291 struct ufs_pwr_mode_info { 292 bool is_valid; 293 struct ufs_pa_layer_attr info; 294 }; 295 296 /** 297 * struct ufs_hba_variant_ops - variant specific callbacks 298 * @name: variant name 299 * @max_num_rtt: maximum RTT supported by the host 300 * @init: called when the driver is initialized 301 * @exit: called to cleanup everything done in init 302 * @set_dma_mask: For setting another DMA mask than indicated by the 64AS 303 * capability bit. 304 * @get_ufs_hci_version: called to get UFS HCI version 305 * @clk_scale_notify: notifies that clks are scaled up/down 306 * @setup_clocks: called before touching any of the controller registers 307 * @hce_enable_notify: called before and after HCE enable bit is set to allow 308 * variant specific Uni-Pro initialization. 309 * @link_startup_notify: called before and after Link startup is carried out 310 * to allow variant specific Uni-Pro initialization. 311 * @pwr_change_notify: called before and after a power mode change 312 * is carried out to allow vendor spesific capabilities 313 * to be set. PRE_CHANGE can modify final_params based 314 * on desired_pwr_mode, but POST_CHANGE must not alter 315 * the final_params parameter 316 * @setup_xfer_req: called before any transfer request is issued 317 * to set some things 318 * @setup_task_mgmt: called before any task management request is issued 319 * to set some things 320 * @hibern8_notify: called around hibern8 enter/exit 321 * @apply_dev_quirks: called to apply device specific quirks 322 * @fixup_dev_quirks: called to modify device specific quirks 323 * @suspend: called during host controller PM callback 324 * @resume: called during host controller PM callback 325 * @dbg_register_dump: used to dump controller debug information 326 * @phy_initialization: used to initialize phys 327 * @device_reset: called to issue a reset pulse on the UFS device 328 * @config_scaling_param: called to configure clock scaling parameters 329 * @fill_crypto_prdt: initialize crypto-related fields in the PRDT 330 * @event_notify: called to notify important events 331 * @mcq_config_resource: called to configure MCQ platform resources 332 * @get_hba_mac: reports maximum number of outstanding commands supported by 333 * the controller. Should be implemented for UFSHCI 4.0 or later 334 * controllers that are not compliant with the UFSHCI 4.0 specification. 335 * @op_runtime_config: called to config Operation and runtime regs Pointers 336 * @get_outstanding_cqs: called to get outstanding completion queues 337 * @config_esi: called to config Event Specific Interrupt 338 * @config_scsi_dev: called to configure SCSI device parameters 339 */ 340 struct ufs_hba_variant_ops { 341 const char *name; 342 int max_num_rtt; 343 int (*init)(struct ufs_hba *); 344 void (*exit)(struct ufs_hba *); 345 u32 (*get_ufs_hci_version)(struct ufs_hba *); 346 int (*set_dma_mask)(struct ufs_hba *); 347 int (*clk_scale_notify)(struct ufs_hba *, bool, 348 enum ufs_notify_change_status); 349 int (*setup_clocks)(struct ufs_hba *, bool, 350 enum ufs_notify_change_status); 351 int (*hce_enable_notify)(struct ufs_hba *, 352 enum ufs_notify_change_status); 353 int (*link_startup_notify)(struct ufs_hba *, 354 enum ufs_notify_change_status); 355 int (*pwr_change_notify)(struct ufs_hba *, 356 enum ufs_notify_change_status status, 357 struct ufs_pa_layer_attr *desired_pwr_mode, 358 struct ufs_pa_layer_attr *final_params); 359 void (*setup_xfer_req)(struct ufs_hba *hba, int tag, 360 bool is_scsi_cmd); 361 void (*setup_task_mgmt)(struct ufs_hba *, int, u8); 362 void (*hibern8_notify)(struct ufs_hba *, enum uic_cmd_dme, 363 enum ufs_notify_change_status); 364 int (*apply_dev_quirks)(struct ufs_hba *hba); 365 void (*fixup_dev_quirks)(struct ufs_hba *hba); 366 int (*suspend)(struct ufs_hba *, enum ufs_pm_op, 367 enum ufs_notify_change_status); 368 int (*resume)(struct ufs_hba *, enum ufs_pm_op); 369 void (*dbg_register_dump)(struct ufs_hba *hba); 370 int (*phy_initialization)(struct ufs_hba *); 371 int (*device_reset)(struct ufs_hba *hba); 372 void (*config_scaling_param)(struct ufs_hba *hba, 373 struct devfreq_dev_profile *profile, 374 struct devfreq_simple_ondemand_data *data); 375 int (*fill_crypto_prdt)(struct ufs_hba *hba, 376 const struct bio_crypt_ctx *crypt_ctx, 377 void *prdt, unsigned int num_segments); 378 void (*event_notify)(struct ufs_hba *hba, 379 enum ufs_event_type evt, void *data); 380 int (*mcq_config_resource)(struct ufs_hba *hba); 381 int (*get_hba_mac)(struct ufs_hba *hba); 382 int (*op_runtime_config)(struct ufs_hba *hba); 383 int (*get_outstanding_cqs)(struct ufs_hba *hba, 384 unsigned long *ocqs); 385 int (*config_esi)(struct ufs_hba *hba); 386 void (*config_scsi_dev)(struct scsi_device *sdev); 387 }; 388 389 /* clock gating state */ 390 enum clk_gating_state { 391 CLKS_OFF, 392 CLKS_ON, 393 REQ_CLKS_OFF, 394 REQ_CLKS_ON, 395 }; 396 397 /** 398 * struct ufs_clk_gating - UFS clock gating related info 399 * @gate_work: worker to turn off clocks after some delay as specified in 400 * delay_ms 401 * @ungate_work: worker to turn on clocks that will be used in case of 402 * interrupt context 403 * @clk_gating_workq: workqueue for clock gating work. 404 * @lock: serialize access to some struct ufs_clk_gating members. An outer lock 405 * relative to the host lock 406 * @state: the current clocks state 407 * @delay_ms: gating delay in ms 408 * @is_suspended: clk gating is suspended when set to 1 which can be used 409 * during suspend/resume 410 * @delay_attr: sysfs attribute to control delay_attr 411 * @enable_attr: sysfs attribute to enable/disable clock gating 412 * @is_enabled: Indicates the current status of clock gating 413 * @is_initialized: Indicates whether clock gating is initialized or not 414 * @active_reqs: number of requests that are pending and should be waited for 415 * completion before gating clocks. 416 */ 417 struct ufs_clk_gating { 418 struct delayed_work gate_work; 419 struct work_struct ungate_work; 420 struct workqueue_struct *clk_gating_workq; 421 422 spinlock_t lock; 423 424 enum clk_gating_state state; 425 unsigned long delay_ms; 426 bool is_suspended; 427 struct device_attribute delay_attr; 428 struct device_attribute enable_attr; 429 bool is_enabled; 430 bool is_initialized; 431 int active_reqs; 432 }; 433 434 /** 435 * struct ufs_clk_scaling - UFS clock scaling related data 436 * @workq: workqueue to schedule devfreq suspend/resume work 437 * @suspend_work: worker to suspend devfreq 438 * @resume_work: worker to resume devfreq 439 * @lock: serialize access to some struct ufs_clk_scaling members 440 * @active_reqs: number of requests that are pending. If this is zero when 441 * devfreq ->target() function is called then schedule "suspend_work" to 442 * suspend devfreq. 443 * @tot_busy_t: Total busy time in current polling window 444 * @window_start_t: Start time (in jiffies) of the current polling window 445 * @busy_start_t: Start time of current busy period 446 * @enable_attr: sysfs attribute to enable/disable clock scaling 447 * @saved_pwr_info: UFS power mode may also be changed during scaling and this 448 * one keeps track of previous power mode. 449 * @target_freq: frequency requested by devfreq framework 450 * @min_gear: lowest HS gear to scale down to 451 * @is_enabled: tracks if scaling is currently enabled or not, controlled by 452 * clkscale_enable sysfs node 453 * @is_allowed: tracks if scaling is currently allowed or not, used to block 454 * clock scaling which is not invoked from devfreq governor 455 * @is_initialized: Indicates whether clock scaling is initialized or not 456 * @is_busy_started: tracks if busy period has started or not 457 * @is_suspended: tracks if devfreq is suspended or not 458 */ 459 struct ufs_clk_scaling { 460 struct workqueue_struct *workq; 461 struct work_struct suspend_work; 462 struct work_struct resume_work; 463 464 spinlock_t lock; 465 466 int active_reqs; 467 unsigned long tot_busy_t; 468 ktime_t window_start_t; 469 ktime_t busy_start_t; 470 struct device_attribute enable_attr; 471 struct ufs_pa_layer_attr saved_pwr_info; 472 unsigned long target_freq; 473 u32 min_gear; 474 bool is_enabled; 475 bool is_allowed; 476 bool is_initialized; 477 bool is_busy_started; 478 bool is_suspended; 479 bool suspend_on_no_request; 480 }; 481 482 #define UFS_EVENT_HIST_LENGTH 8 483 /** 484 * struct ufs_event_hist - keeps history of errors 485 * @pos: index to indicate cyclic buffer position 486 * @val: cyclic buffer for registers value 487 * @tstamp: cyclic buffer for time stamp 488 * @cnt: error counter 489 */ 490 struct ufs_event_hist { 491 int pos; 492 u32 val[UFS_EVENT_HIST_LENGTH]; 493 u64 tstamp[UFS_EVENT_HIST_LENGTH]; 494 unsigned long long cnt; 495 }; 496 497 /** 498 * struct ufs_stats - keeps usage/err statistics 499 * @last_intr_status: record the last interrupt status. 500 * @last_intr_ts: record the last interrupt timestamp. 501 * @hibern8_exit_cnt: Counter to keep track of number of exits, 502 * reset this after link-startup. 503 * @last_hibern8_exit_tstamp: Set time after the hibern8 exit. 504 * Clear after the first successful command completion. 505 * @event: array with event history. 506 */ 507 struct ufs_stats { 508 u32 last_intr_status; 509 u64 last_intr_ts; 510 511 u32 hibern8_exit_cnt; 512 u64 last_hibern8_exit_tstamp; 513 struct ufs_event_hist event[UFS_EVT_CNT]; 514 }; 515 516 /** 517 * enum ufshcd_state - UFS host controller state 518 * @UFSHCD_STATE_RESET: Link is not operational. Postpone SCSI command 519 * processing. 520 * @UFSHCD_STATE_OPERATIONAL: The host controller is operational and can process 521 * SCSI commands. 522 * @UFSHCD_STATE_EH_SCHEDULED_NON_FATAL: The error handler has been scheduled. 523 * SCSI commands may be submitted to the controller. 524 * @UFSHCD_STATE_EH_SCHEDULED_FATAL: The error handler has been scheduled. Fail 525 * newly submitted SCSI commands with error code DID_BAD_TARGET. 526 * @UFSHCD_STATE_ERROR: An unrecoverable error occurred, e.g. link recovery 527 * failed. Fail all SCSI commands with error code DID_ERROR. 528 */ 529 enum ufshcd_state { 530 UFSHCD_STATE_RESET, 531 UFSHCD_STATE_OPERATIONAL, 532 UFSHCD_STATE_EH_SCHEDULED_NON_FATAL, 533 UFSHCD_STATE_EH_SCHEDULED_FATAL, 534 UFSHCD_STATE_ERROR, 535 }; 536 537 enum ufshcd_quirks { 538 /* Interrupt aggregation support is broken */ 539 UFSHCD_QUIRK_BROKEN_INTR_AGGR = 1 << 0, 540 541 /* 542 * delay before each dme command is required as the unipro 543 * layer has shown instabilities 544 */ 545 UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS = 1 << 1, 546 547 /* 548 * If UFS host controller is having issue in processing LCC (Line 549 * Control Command) coming from device then enable this quirk. 550 * When this quirk is enabled, host controller driver should disable 551 * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE 552 * attribute of device to 0). 553 */ 554 UFSHCD_QUIRK_BROKEN_LCC = 1 << 2, 555 556 /* 557 * The attribute PA_RXHSUNTERMCAP specifies whether or not the 558 * inbound Link supports unterminated line in HS mode. Setting this 559 * attribute to 1 fixes moving to HS gear. 560 */ 561 UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP = 1 << 3, 562 563 /* 564 * This quirk needs to be enabled if the host controller only allows 565 * accessing the peer dme attributes in AUTO mode (FAST AUTO or 566 * SLOW AUTO). 567 */ 568 UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE = 1 << 4, 569 570 /* 571 * This quirk needs to be enabled if the host controller doesn't 572 * advertise the correct version in UFS_VER register. If this quirk 573 * is enabled, standard UFS host driver will call the vendor specific 574 * ops (get_ufs_hci_version) to get the correct version. 575 */ 576 UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION = 1 << 5, 577 578 /* 579 * Clear handling for transfer/task request list is just opposite. 580 */ 581 UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR = 1 << 6, 582 583 /* 584 * This quirk needs to be enabled if host controller doesn't allow 585 * that the interrupt aggregation timer and counter are reset by s/w. 586 */ 587 UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR = 1 << 7, 588 589 /* 590 * This quirks needs to be enabled if host controller cannot be 591 * enabled via HCE register. 592 */ 593 UFSHCI_QUIRK_BROKEN_HCE = 1 << 8, 594 595 /* 596 * This quirk needs to be enabled if the host controller regards 597 * resolution of the values of PRDTO and PRDTL in UTRD as byte. 598 */ 599 UFSHCD_QUIRK_PRDT_BYTE_GRAN = 1 << 9, 600 601 /* 602 * This quirk needs to be enabled if the host controller reports 603 * OCS FATAL ERROR with device error through sense data 604 */ 605 UFSHCD_QUIRK_BROKEN_OCS_FATAL_ERROR = 1 << 10, 606 607 /* 608 * This quirk needs to be enabled if the host controller has 609 * auto-hibernate capability but it doesn't work. 610 */ 611 UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8 = 1 << 11, 612 613 /* 614 * This quirk needs to disable manual flush for write booster 615 */ 616 UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL = 1 << 12, 617 618 /* 619 * This quirk needs to disable unipro timeout values 620 * before power mode change 621 */ 622 UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING = 1 << 13, 623 624 /* 625 * This quirk needs to be enabled if the host controller does not 626 * support UIC command 627 */ 628 UFSHCD_QUIRK_BROKEN_UIC_CMD = 1 << 15, 629 630 /* 631 * This quirk needs to be enabled if the host controller cannot 632 * support physical host configuration. 633 */ 634 UFSHCD_QUIRK_SKIP_PH_CONFIGURATION = 1 << 16, 635 636 /* 637 * This quirk needs to be enabled if the host controller has 638 * auto-hibernate capability but it's FASTAUTO only. 639 */ 640 UFSHCD_QUIRK_HIBERN_FASTAUTO = 1 << 18, 641 642 /* 643 * This quirk needs to be enabled if the host controller needs 644 * to reinit the device after switching to maximum gear. 645 */ 646 UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH = 1 << 19, 647 648 /* 649 * Some host raises interrupt (per queue) in addition to 650 * CQES (traditional) when ESI is disabled. 651 * Enable this quirk will disable CQES and use per queue interrupt. 652 */ 653 UFSHCD_QUIRK_MCQ_BROKEN_INTR = 1 << 20, 654 655 /* 656 * Some host does not implement SQ Run Time Command (SQRTC) register 657 * thus need this quirk to skip related flow. 658 */ 659 UFSHCD_QUIRK_MCQ_BROKEN_RTC = 1 << 21, 660 661 /* 662 * This quirk needs to be enabled if the host controller supports inline 663 * encryption but it needs to initialize the crypto capabilities in a 664 * nonstandard way and/or needs to override blk_crypto_ll_ops. If 665 * enabled, the standard code won't initialize the blk_crypto_profile; 666 * ufs_hba_variant_ops::init() must do it instead. 667 */ 668 UFSHCD_QUIRK_CUSTOM_CRYPTO_PROFILE = 1 << 22, 669 670 /* 671 * This quirk needs to be enabled if the host controller supports inline 672 * encryption but does not support the CRYPTO_GENERAL_ENABLE bit, i.e. 673 * host controller initialization fails if that bit is set. 674 */ 675 UFSHCD_QUIRK_BROKEN_CRYPTO_ENABLE = 1 << 23, 676 677 /* 678 * This quirk needs to be enabled if the host controller driver copies 679 * cryptographic keys into the PRDT in order to send them to hardware, 680 * and therefore the PRDT should be zeroized after each request (as per 681 * the standard best practice for managing keys). 682 */ 683 UFSHCD_QUIRK_KEYS_IN_PRDT = 1 << 24, 684 685 /* 686 * This quirk indicates that the controller reports the value 1 (not 687 * supported) in the Legacy Single DoorBell Support (LSDBS) bit of the 688 * Controller Capabilities register although it supports the legacy 689 * single doorbell mode. 690 */ 691 UFSHCD_QUIRK_BROKEN_LSDBS_CAP = 1 << 25, 692 }; 693 694 enum ufshcd_caps { 695 /* Allow dynamic clk gating */ 696 UFSHCD_CAP_CLK_GATING = 1 << 0, 697 698 /* Allow hiberb8 with clk gating */ 699 UFSHCD_CAP_HIBERN8_WITH_CLK_GATING = 1 << 1, 700 701 /* Allow dynamic clk scaling */ 702 UFSHCD_CAP_CLK_SCALING = 1 << 2, 703 704 /* Allow auto bkops to enabled during runtime suspend */ 705 UFSHCD_CAP_AUTO_BKOPS_SUSPEND = 1 << 3, 706 707 /* 708 * This capability allows host controller driver to use the UFS HCI's 709 * interrupt aggregation capability. 710 * CAUTION: Enabling this might reduce overall UFS throughput. 711 */ 712 UFSHCD_CAP_INTR_AGGR = 1 << 4, 713 714 /* 715 * This capability allows the device auto-bkops to be always enabled 716 * except during suspend (both runtime and suspend). 717 * Enabling this capability means that device will always be allowed 718 * to do background operation when it's active but it might degrade 719 * the performance of ongoing read/write operations. 720 */ 721 UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND = 1 << 5, 722 723 /* 724 * This capability allows host controller driver to automatically 725 * enable runtime power management by itself instead of waiting 726 * for userspace to control the power management. 727 */ 728 UFSHCD_CAP_RPM_AUTOSUSPEND = 1 << 6, 729 730 /* 731 * This capability allows the host controller driver to turn-on 732 * WriteBooster, if the underlying device supports it and is 733 * provisioned to be used. This would increase the write performance. 734 */ 735 UFSHCD_CAP_WB_EN = 1 << 7, 736 737 /* 738 * This capability allows the host controller driver to use the 739 * inline crypto engine, if it is present 740 */ 741 UFSHCD_CAP_CRYPTO = 1 << 8, 742 743 /* 744 * This capability allows the controller regulators to be put into 745 * lpm mode aggressively during clock gating. 746 * This would increase power savings. 747 */ 748 UFSHCD_CAP_AGGR_POWER_COLLAPSE = 1 << 9, 749 750 /* 751 * This capability allows the host controller driver to use DeepSleep, 752 * if it is supported by the UFS device. The host controller driver must 753 * support device hardware reset via the hba->device_reset() callback, 754 * in order to exit DeepSleep state. 755 */ 756 UFSHCD_CAP_DEEPSLEEP = 1 << 10, 757 758 /* 759 * This capability allows the host controller driver to use temperature 760 * notification if it is supported by the UFS device. 761 */ 762 UFSHCD_CAP_TEMP_NOTIF = 1 << 11, 763 764 /* 765 * Enable WriteBooster when scaling up the clock and disable 766 * WriteBooster when scaling the clock down. 767 */ 768 UFSHCD_CAP_WB_WITH_CLK_SCALING = 1 << 12, 769 }; 770 771 struct ufs_hba_variant_params { 772 struct devfreq_dev_profile devfreq_profile; 773 struct devfreq_simple_ondemand_data ondemand_data; 774 u16 hba_enable_delay_us; 775 u32 wb_flush_threshold; 776 }; 777 778 struct ufs_hba_monitor { 779 unsigned long chunk_size; 780 781 unsigned long nr_sec_rw[2]; 782 ktime_t total_busy[2]; 783 784 unsigned long nr_req[2]; 785 /* latencies*/ 786 ktime_t lat_sum[2]; 787 ktime_t lat_max[2]; 788 ktime_t lat_min[2]; 789 790 u32 nr_queued[2]; 791 ktime_t busy_start_ts[2]; 792 793 ktime_t enabled_ts; 794 bool enabled; 795 }; 796 797 /** 798 * struct ufshcd_res_info_t - MCQ related resource regions 799 * 800 * @name: resource name 801 * @resource: pointer to resource region 802 * @base: register base address 803 */ 804 struct ufshcd_res_info { 805 const char *name; 806 struct resource *resource; 807 void __iomem *base; 808 }; 809 810 enum ufshcd_res { 811 RES_UFS, 812 RES_MCQ, 813 RES_MCQ_SQD, 814 RES_MCQ_SQIS, 815 RES_MCQ_CQD, 816 RES_MCQ_CQIS, 817 RES_MCQ_VS, 818 RES_MAX, 819 }; 820 821 /** 822 * struct ufshcd_mcq_opr_info_t - Operation and Runtime registers 823 * 824 * @offset: Doorbell Address Offset 825 * @stride: Steps proportional to queue [0...31] 826 * @base: base address 827 */ 828 struct ufshcd_mcq_opr_info_t { 829 unsigned long offset; 830 unsigned long stride; 831 void __iomem *base; 832 }; 833 834 enum ufshcd_mcq_opr { 835 OPR_SQD, 836 OPR_SQIS, 837 OPR_CQD, 838 OPR_CQIS, 839 OPR_MAX, 840 }; 841 842 /** 843 * struct ufs_hba - per adapter private structure 844 * @mmio_base: UFSHCI base register address 845 * @ucdl_base_addr: UFS Command Descriptor base address 846 * @utrdl_base_addr: UTP Transfer Request Descriptor base address 847 * @utmrdl_base_addr: UTP Task Management Descriptor base address 848 * @ucdl_dma_addr: UFS Command Descriptor DMA address 849 * @utrdl_dma_addr: UTRDL DMA address 850 * @utmrdl_dma_addr: UTMRDL DMA address 851 * @host: Scsi_Host instance of the driver 852 * @dev: device handle 853 * @ufs_device_wlun: WLUN that controls the entire UFS device. 854 * @hwmon_device: device instance registered with the hwmon core. 855 * @curr_dev_pwr_mode: active UFS device power mode. 856 * @uic_link_state: active state of the link to the UFS device. 857 * @rpm_lvl: desired UFS power management level during runtime PM. 858 * @spm_lvl: desired UFS power management level during system PM. 859 * @pm_op_in_progress: whether or not a PM operation is in progress. 860 * @ahit: value of Auto-Hibernate Idle Timer register. 861 * @lrb: local reference block 862 * @outstanding_tasks: Bits representing outstanding task requests 863 * @outstanding_lock: Protects @outstanding_reqs. 864 * @outstanding_reqs: Bits representing outstanding transfer requests 865 * @capabilities: UFS Controller Capabilities 866 * @mcq_capabilities: UFS Multi Circular Queue capabilities 867 * @nutrs: Transfer Request Queue depth supported by controller 868 * @nortt - Max outstanding RTTs supported by controller 869 * @nutmrs: Task Management Queue depth supported by controller 870 * @reserved_slot: Used to submit device commands. Protected by @dev_cmd.lock. 871 * @ufs_version: UFS Version to which controller complies 872 * @vops: pointer to variant specific operations 873 * @vps: pointer to variant specific parameters 874 * @priv: pointer to variant specific private data 875 * @sg_entry_size: size of struct ufshcd_sg_entry (may include variant fields) 876 * @irq: Irq number of the controller 877 * @is_irq_enabled: whether or not the UFS controller interrupt is enabled. 878 * @dev_ref_clk_freq: reference clock frequency 879 * @quirks: bitmask with information about deviations from the UFSHCI standard. 880 * @dev_quirks: bitmask with information about deviations from the UFS standard. 881 * @tmf_tag_set: TMF tag set. 882 * @tmf_queue: Used to allocate TMF tags. 883 * @tmf_rqs: array with pointers to TMF requests while these are in progress. 884 * @active_uic_cmd: pointer to active UIC command. 885 * @uic_cmd_mutex: mutex used for serializing UIC command processing. 886 * @uic_async_done: completion used to wait for power mode or hibernation state 887 * changes. 888 * @ufshcd_state: UFSHCD state 889 * @eh_flags: Error handling flags 890 * @intr_mask: Interrupt Mask Bits 891 * @ee_ctrl_mask: Exception event control mask 892 * @ee_drv_mask: Exception event mask for driver 893 * @ee_usr_mask: Exception event mask for user (set via debugfs) 894 * @ee_ctrl_mutex: Used to serialize exception event information. 895 * @is_powered: flag to check if HBA is powered 896 * @shutting_down: flag to check if shutdown has been invoked 897 * @host_sem: semaphore used to serialize concurrent contexts 898 * @eh_wq: Workqueue that eh_work works on 899 * @eh_work: Worker to handle UFS errors that require s/w attention 900 * @eeh_work: Worker to handle exception events 901 * @errors: HBA errors 902 * @uic_error: UFS interconnect layer error status 903 * @saved_err: sticky error mask 904 * @saved_uic_err: sticky UIC error mask 905 * @ufs_stats: various error counters 906 * @force_reset: flag to force eh_work perform a full reset 907 * @force_pmc: flag to force a power mode change 908 * @silence_err_logs: flag to silence error logs 909 * @dev_cmd: ufs device management command information 910 * @last_dme_cmd_tstamp: time stamp of the last completed DME command 911 * @nop_out_timeout: NOP OUT timeout value 912 * @dev_info: information about the UFS device 913 * @auto_bkops_enabled: to track whether bkops is enabled in device 914 * @vreg_info: UFS device voltage regulator information 915 * @clk_list_head: UFS host controller clocks list node head 916 * @use_pm_opp: Indicates whether OPP based scaling is used or not 917 * @req_abort_count: number of times ufshcd_abort() has been called 918 * @lanes_per_direction: number of lanes per data direction between the UFS 919 * controller and the UFS device. 920 * @pwr_info: holds current power mode 921 * @max_pwr_info: keeps the device max valid pwm 922 * @clk_gating: information related to clock gating 923 * @caps: bitmask with information about UFS controller capabilities 924 * @devfreq: frequency scaling information owned by the devfreq core 925 * @clk_scaling: frequency scaling information owned by the UFS driver 926 * @system_suspending: system suspend has been started and system resume has 927 * not yet finished. 928 * @is_sys_suspended: UFS device has been suspended because of system suspend 929 * @urgent_bkops_lvl: keeps track of urgent bkops level for device 930 * @is_urgent_bkops_lvl_checked: keeps track if the urgent bkops level for 931 * device is known or not. 932 * @wb_mutex: used to serialize devfreq and sysfs write booster toggling 933 * @clk_scaling_lock: used to serialize device commands and clock scaling 934 * @desc_size: descriptor sizes reported by device 935 * @bsg_dev: struct device associated with the BSG queue 936 * @bsg_queue: BSG queue associated with the UFS controller 937 * @rpm_dev_flush_recheck_work: used to suspend from RPM (runtime power 938 * management) after the UFS device has finished a WriteBooster buffer 939 * flush or auto BKOP. 940 * @monitor: statistics about UFS commands 941 * @crypto_capabilities: Content of crypto capabilities register (0x100) 942 * @crypto_cap_array: Array of crypto capabilities 943 * @crypto_cfg_register: Start of the crypto cfg array 944 * @crypto_profile: the crypto profile of this hba (if applicable) 945 * @debugfs_root: UFS controller debugfs root directory 946 * @debugfs_ee_work: used to restore ee_ctrl_mask after a delay 947 * @debugfs_ee_rate_limit_ms: user configurable delay after which to restore 948 * ee_ctrl_mask 949 * @luns_avail: number of regular and well known LUNs supported by the UFS 950 * device 951 * @nr_hw_queues: number of hardware queues configured 952 * @nr_queues: number of Queues of different queue types 953 * @complete_put: whether or not to call ufshcd_rpm_put() from inside 954 * ufshcd_resume_complete() 955 * @mcq_sup: is mcq supported by UFSHC 956 * @mcq_enabled: is mcq ready to accept requests 957 * @res: array of resource info of MCQ registers 958 * @mcq_base: Multi circular queue registers base address 959 * @uhq: array of supported hardware queues 960 * @dev_cmd_queue: Queue for issuing device management commands 961 * @mcq_opr: MCQ operation and runtime registers 962 * @ufs_rtc_update_work: A work for UFS RTC periodic update 963 * @pm_qos_req: PM QoS request handle 964 * @pm_qos_enabled: flag to check if pm qos is enabled 965 */ 966 struct ufs_hba { 967 void __iomem *mmio_base; 968 969 /* Virtual memory reference */ 970 struct utp_transfer_cmd_desc *ucdl_base_addr; 971 struct utp_transfer_req_desc *utrdl_base_addr; 972 struct utp_task_req_desc *utmrdl_base_addr; 973 974 /* DMA memory reference */ 975 dma_addr_t ucdl_dma_addr; 976 dma_addr_t utrdl_dma_addr; 977 dma_addr_t utmrdl_dma_addr; 978 979 struct Scsi_Host *host; 980 struct device *dev; 981 struct scsi_device *ufs_device_wlun; 982 983 #ifdef CONFIG_SCSI_UFS_HWMON 984 struct device *hwmon_device; 985 #endif 986 987 enum ufs_dev_pwr_mode curr_dev_pwr_mode; 988 enum uic_link_state uic_link_state; 989 /* Desired UFS power management level during runtime PM */ 990 enum ufs_pm_level rpm_lvl; 991 /* Desired UFS power management level during system PM */ 992 enum ufs_pm_level spm_lvl; 993 int pm_op_in_progress; 994 995 /* Auto-Hibernate Idle Timer register value */ 996 u32 ahit; 997 998 struct ufshcd_lrb *lrb; 999 1000 unsigned long outstanding_tasks; 1001 spinlock_t outstanding_lock; 1002 unsigned long outstanding_reqs; 1003 1004 u32 capabilities; 1005 int nutrs; 1006 int nortt; 1007 u32 mcq_capabilities; 1008 int nutmrs; 1009 u32 reserved_slot; 1010 u32 ufs_version; 1011 const struct ufs_hba_variant_ops *vops; 1012 struct ufs_hba_variant_params *vps; 1013 void *priv; 1014 #ifdef CONFIG_SCSI_UFS_VARIABLE_SG_ENTRY_SIZE 1015 size_t sg_entry_size; 1016 #endif 1017 unsigned int irq; 1018 bool is_irq_enabled; 1019 enum ufs_ref_clk_freq dev_ref_clk_freq; 1020 1021 unsigned int quirks; /* Deviations from standard UFSHCI spec. */ 1022 1023 /* Device deviations from standard UFS device spec. */ 1024 unsigned int dev_quirks; 1025 1026 struct blk_mq_tag_set tmf_tag_set; 1027 struct request_queue *tmf_queue; 1028 struct request **tmf_rqs; 1029 1030 struct uic_command *active_uic_cmd; 1031 struct mutex uic_cmd_mutex; 1032 struct completion *uic_async_done; 1033 1034 enum ufshcd_state ufshcd_state; 1035 u32 eh_flags; 1036 u32 intr_mask; 1037 u16 ee_ctrl_mask; 1038 u16 ee_drv_mask; 1039 u16 ee_usr_mask; 1040 struct mutex ee_ctrl_mutex; 1041 bool is_powered; 1042 bool shutting_down; 1043 struct semaphore host_sem; 1044 1045 /* Work Queues */ 1046 struct workqueue_struct *eh_wq; 1047 struct work_struct eh_work; 1048 struct work_struct eeh_work; 1049 1050 /* HBA Errors */ 1051 u32 errors; 1052 u32 uic_error; 1053 u32 saved_err; 1054 u32 saved_uic_err; 1055 struct ufs_stats ufs_stats; 1056 bool force_reset; 1057 bool force_pmc; 1058 bool silence_err_logs; 1059 1060 /* Device management request data */ 1061 struct ufs_dev_cmd dev_cmd; 1062 ktime_t last_dme_cmd_tstamp; 1063 int nop_out_timeout; 1064 1065 /* Keeps information of the UFS device connected to this host */ 1066 struct ufs_dev_info dev_info; 1067 bool auto_bkops_enabled; 1068 struct ufs_vreg_info vreg_info; 1069 struct list_head clk_list_head; 1070 bool use_pm_opp; 1071 1072 /* Number of requests aborts */ 1073 int req_abort_count; 1074 1075 /* Number of lanes available (1 or 2) for Rx/Tx */ 1076 u32 lanes_per_direction; 1077 struct ufs_pa_layer_attr pwr_info; 1078 struct ufs_pwr_mode_info max_pwr_info; 1079 1080 struct ufs_clk_gating clk_gating; 1081 /* Control to enable/disable host capabilities */ 1082 u32 caps; 1083 1084 struct devfreq *devfreq; 1085 struct ufs_clk_scaling clk_scaling; 1086 bool system_suspending; 1087 bool is_sys_suspended; 1088 1089 enum bkops_status urgent_bkops_lvl; 1090 bool is_urgent_bkops_lvl_checked; 1091 1092 struct mutex wb_mutex; 1093 struct rw_semaphore clk_scaling_lock; 1094 1095 struct device bsg_dev; 1096 struct request_queue *bsg_queue; 1097 struct delayed_work rpm_dev_flush_recheck_work; 1098 1099 struct ufs_hba_monitor monitor; 1100 1101 #ifdef CONFIG_SCSI_UFS_CRYPTO 1102 union ufs_crypto_capabilities crypto_capabilities; 1103 union ufs_crypto_cap_entry *crypto_cap_array; 1104 u32 crypto_cfg_register; 1105 struct blk_crypto_profile crypto_profile; 1106 #endif 1107 #ifdef CONFIG_DEBUG_FS 1108 struct dentry *debugfs_root; 1109 struct delayed_work debugfs_ee_work; 1110 u32 debugfs_ee_rate_limit_ms; 1111 #endif 1112 #ifdef CONFIG_SCSI_UFS_FAULT_INJECTION 1113 struct fault_attr trigger_eh_attr; 1114 struct fault_attr timeout_attr; 1115 #endif 1116 u32 luns_avail; 1117 unsigned int nr_hw_queues; 1118 unsigned int nr_queues[HCTX_MAX_TYPES]; 1119 bool complete_put; 1120 bool scsi_host_added; 1121 bool mcq_sup; 1122 bool lsdb_sup; 1123 bool mcq_enabled; 1124 struct ufshcd_res_info res[RES_MAX]; 1125 void __iomem *mcq_base; 1126 struct ufs_hw_queue *uhq; 1127 struct ufs_hw_queue *dev_cmd_queue; 1128 struct ufshcd_mcq_opr_info_t mcq_opr[OPR_MAX]; 1129 1130 struct delayed_work ufs_rtc_update_work; 1131 struct pm_qos_request pm_qos_req; 1132 bool pm_qos_enabled; 1133 }; 1134 1135 /** 1136 * struct ufs_hw_queue - per hardware queue structure 1137 * @mcq_sq_head: base address of submission queue head pointer 1138 * @mcq_sq_tail: base address of submission queue tail pointer 1139 * @mcq_cq_head: base address of completion queue head pointer 1140 * @mcq_cq_tail: base address of completion queue tail pointer 1141 * @sqe_base_addr: submission queue entry base address 1142 * @sqe_dma_addr: submission queue dma address 1143 * @cqe_base_addr: completion queue base address 1144 * @cqe_dma_addr: completion queue dma address 1145 * @max_entries: max number of slots in this hardware queue 1146 * @id: hardware queue ID 1147 * @sq_tp_slot: current slot to which SQ tail pointer is pointing 1148 * @sq_lock: serialize submission queue access 1149 * @cq_tail_slot: current slot to which CQ tail pointer is pointing 1150 * @cq_head_slot: current slot to which CQ head pointer is pointing 1151 * @cq_lock: Synchronize between multiple polling instances 1152 * @sq_mutex: prevent submission queue concurrent access 1153 */ 1154 struct ufs_hw_queue { 1155 void __iomem *mcq_sq_head; 1156 void __iomem *mcq_sq_tail; 1157 void __iomem *mcq_cq_head; 1158 void __iomem *mcq_cq_tail; 1159 1160 struct utp_transfer_req_desc *sqe_base_addr; 1161 dma_addr_t sqe_dma_addr; 1162 struct cq_entry *cqe_base_addr; 1163 dma_addr_t cqe_dma_addr; 1164 u32 max_entries; 1165 u32 id; 1166 u32 sq_tail_slot; 1167 spinlock_t sq_lock; 1168 u32 cq_tail_slot; 1169 u32 cq_head_slot; 1170 spinlock_t cq_lock; 1171 /* prevent concurrent access to submission queue */ 1172 struct mutex sq_mutex; 1173 }; 1174 1175 #define MCQ_QCFG_SIZE 0x40 1176 1177 static inline unsigned int ufshcd_mcq_opr_offset(struct ufs_hba *hba, 1178 enum ufshcd_mcq_opr opr, int idx) 1179 { 1180 return hba->mcq_opr[opr].offset + hba->mcq_opr[opr].stride * idx; 1181 } 1182 1183 static inline unsigned int ufshcd_mcq_cfg_offset(unsigned int reg, int idx) 1184 { 1185 return reg + MCQ_QCFG_SIZE * idx; 1186 } 1187 1188 #ifdef CONFIG_SCSI_UFS_VARIABLE_SG_ENTRY_SIZE 1189 static inline size_t ufshcd_sg_entry_size(const struct ufs_hba *hba) 1190 { 1191 return hba->sg_entry_size; 1192 } 1193 1194 static inline void ufshcd_set_sg_entry_size(struct ufs_hba *hba, size_t sg_entry_size) 1195 { 1196 WARN_ON_ONCE(sg_entry_size < sizeof(struct ufshcd_sg_entry)); 1197 hba->sg_entry_size = sg_entry_size; 1198 } 1199 #else 1200 static inline size_t ufshcd_sg_entry_size(const struct ufs_hba *hba) 1201 { 1202 return sizeof(struct ufshcd_sg_entry); 1203 } 1204 1205 #define ufshcd_set_sg_entry_size(hba, sg_entry_size) \ 1206 ({ (void)(hba); BUILD_BUG_ON(sg_entry_size != sizeof(struct ufshcd_sg_entry)); }) 1207 #endif 1208 1209 #ifdef CONFIG_SCSI_UFS_CRYPTO 1210 static inline struct ufs_hba * 1211 ufs_hba_from_crypto_profile(struct blk_crypto_profile *profile) 1212 { 1213 return container_of(profile, struct ufs_hba, crypto_profile); 1214 } 1215 #endif 1216 1217 static inline size_t ufshcd_get_ucd_size(const struct ufs_hba *hba) 1218 { 1219 return sizeof(struct utp_transfer_cmd_desc) + SG_ALL * ufshcd_sg_entry_size(hba); 1220 } 1221 1222 /* Returns true if clocks can be gated. Otherwise false */ 1223 static inline bool ufshcd_is_clkgating_allowed(struct ufs_hba *hba) 1224 { 1225 return hba->caps & UFSHCD_CAP_CLK_GATING; 1226 } 1227 static inline bool ufshcd_can_hibern8_during_gating(struct ufs_hba *hba) 1228 { 1229 return hba->caps & UFSHCD_CAP_HIBERN8_WITH_CLK_GATING; 1230 } 1231 static inline int ufshcd_is_clkscaling_supported(struct ufs_hba *hba) 1232 { 1233 return hba->caps & UFSHCD_CAP_CLK_SCALING; 1234 } 1235 static inline bool ufshcd_can_autobkops_during_suspend(struct ufs_hba *hba) 1236 { 1237 return hba->caps & UFSHCD_CAP_AUTO_BKOPS_SUSPEND; 1238 } 1239 static inline bool ufshcd_is_rpm_autosuspend_allowed(struct ufs_hba *hba) 1240 { 1241 return hba->caps & UFSHCD_CAP_RPM_AUTOSUSPEND; 1242 } 1243 1244 static inline bool ufshcd_is_intr_aggr_allowed(struct ufs_hba *hba) 1245 { 1246 return (hba->caps & UFSHCD_CAP_INTR_AGGR) && 1247 !(hba->quirks & UFSHCD_QUIRK_BROKEN_INTR_AGGR); 1248 } 1249 1250 static inline bool ufshcd_can_aggressive_pc(struct ufs_hba *hba) 1251 { 1252 return !!(ufshcd_is_link_hibern8(hba) && 1253 (hba->caps & UFSHCD_CAP_AGGR_POWER_COLLAPSE)); 1254 } 1255 1256 static inline bool ufshcd_is_auto_hibern8_supported(struct ufs_hba *hba) 1257 { 1258 return (hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT) && 1259 !(hba->quirks & UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8); 1260 } 1261 1262 static inline bool ufshcd_is_auto_hibern8_enabled(struct ufs_hba *hba) 1263 { 1264 return FIELD_GET(UFSHCI_AHIBERN8_TIMER_MASK, hba->ahit); 1265 } 1266 1267 static inline bool ufshcd_is_wb_allowed(struct ufs_hba *hba) 1268 { 1269 return hba->caps & UFSHCD_CAP_WB_EN; 1270 } 1271 1272 static inline bool ufshcd_enable_wb_if_scaling_up(struct ufs_hba *hba) 1273 { 1274 return hba->caps & UFSHCD_CAP_WB_WITH_CLK_SCALING; 1275 } 1276 1277 #define ufsmcq_writel(hba, val, reg) \ 1278 writel((val), (hba)->mcq_base + (reg)) 1279 #define ufsmcq_readl(hba, reg) \ 1280 readl((hba)->mcq_base + (reg)) 1281 1282 #define ufsmcq_writelx(hba, val, reg) \ 1283 writel_relaxed((val), (hba)->mcq_base + (reg)) 1284 #define ufsmcq_readlx(hba, reg) \ 1285 readl_relaxed((hba)->mcq_base + (reg)) 1286 1287 #define ufshcd_writel(hba, val, reg) \ 1288 writel((val), (hba)->mmio_base + (reg)) 1289 #define ufshcd_readl(hba, reg) \ 1290 readl((hba)->mmio_base + (reg)) 1291 1292 /** 1293 * ufshcd_rmwl - perform read/modify/write for a controller register 1294 * @hba: per adapter instance 1295 * @mask: mask to apply on read value 1296 * @val: actual value to write 1297 * @reg: register address 1298 */ 1299 static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg) 1300 { 1301 u32 tmp; 1302 1303 tmp = ufshcd_readl(hba, reg); 1304 tmp &= ~mask; 1305 tmp |= (val & mask); 1306 ufshcd_writel(hba, tmp, reg); 1307 } 1308 1309 void ufshcd_enable_irq(struct ufs_hba *hba); 1310 void ufshcd_disable_irq(struct ufs_hba *hba); 1311 int ufshcd_alloc_host(struct device *, struct ufs_hba **); 1312 int ufshcd_hba_enable(struct ufs_hba *hba); 1313 int ufshcd_init(struct ufs_hba *, void __iomem *, unsigned int); 1314 int ufshcd_link_recovery(struct ufs_hba *hba); 1315 int ufshcd_make_hba_operational(struct ufs_hba *hba); 1316 void ufshcd_remove(struct ufs_hba *); 1317 int ufshcd_uic_hibern8_enter(struct ufs_hba *hba); 1318 int ufshcd_uic_hibern8_exit(struct ufs_hba *hba); 1319 void ufshcd_delay_us(unsigned long us, unsigned long tolerance); 1320 void ufshcd_parse_dev_ref_clk_freq(struct ufs_hba *hba, struct clk *refclk); 1321 void ufshcd_update_evt_hist(struct ufs_hba *hba, u32 id, u32 val); 1322 void ufshcd_hba_stop(struct ufs_hba *hba); 1323 void ufshcd_schedule_eh_work(struct ufs_hba *hba); 1324 void ufshcd_mcq_config_mac(struct ufs_hba *hba, u32 max_active_cmds); 1325 unsigned int ufshcd_mcq_queue_cfg_addr(struct ufs_hba *hba); 1326 u32 ufshcd_mcq_read_cqis(struct ufs_hba *hba, int i); 1327 void ufshcd_mcq_write_cqis(struct ufs_hba *hba, u32 val, int i); 1328 unsigned long ufshcd_mcq_poll_cqe_lock(struct ufs_hba *hba, 1329 struct ufs_hw_queue *hwq); 1330 void ufshcd_mcq_make_queues_operational(struct ufs_hba *hba); 1331 void ufshcd_mcq_enable(struct ufs_hba *hba); 1332 void ufshcd_mcq_enable_esi(struct ufs_hba *hba); 1333 void ufshcd_mcq_config_esi(struct ufs_hba *hba, struct msi_msg *msg); 1334 1335 int ufshcd_opp_config_clks(struct device *dev, struct opp_table *opp_table, 1336 struct dev_pm_opp *opp, void *data, 1337 bool scaling_down); 1338 /** 1339 * ufshcd_set_variant - set variant specific data to the hba 1340 * @hba: per adapter instance 1341 * @variant: pointer to variant specific data 1342 */ 1343 static inline void ufshcd_set_variant(struct ufs_hba *hba, void *variant) 1344 { 1345 BUG_ON(!hba); 1346 hba->priv = variant; 1347 } 1348 1349 /** 1350 * ufshcd_get_variant - get variant specific data from the hba 1351 * @hba: per adapter instance 1352 */ 1353 static inline void *ufshcd_get_variant(struct ufs_hba *hba) 1354 { 1355 BUG_ON(!hba); 1356 return hba->priv; 1357 } 1358 1359 #ifdef CONFIG_PM 1360 extern int ufshcd_runtime_suspend(struct device *dev); 1361 extern int ufshcd_runtime_resume(struct device *dev); 1362 #endif 1363 #ifdef CONFIG_PM_SLEEP 1364 extern int ufshcd_system_suspend(struct device *dev); 1365 extern int ufshcd_system_resume(struct device *dev); 1366 extern int ufshcd_system_freeze(struct device *dev); 1367 extern int ufshcd_system_thaw(struct device *dev); 1368 extern int ufshcd_system_restore(struct device *dev); 1369 #endif 1370 1371 extern int ufshcd_dme_configure_adapt(struct ufs_hba *hba, 1372 int agreed_gear, 1373 int adapt_val); 1374 extern int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel, 1375 u8 attr_set, u32 mib_val, u8 peer); 1376 extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel, 1377 u32 *mib_val, u8 peer); 1378 extern int ufshcd_config_pwr_mode(struct ufs_hba *hba, 1379 struct ufs_pa_layer_attr *desired_pwr_mode); 1380 extern int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode); 1381 1382 /* UIC command interfaces for DME primitives */ 1383 #define DME_LOCAL 0 1384 #define DME_PEER 1 1385 #define ATTR_SET_NOR 0 /* NORMAL */ 1386 #define ATTR_SET_ST 1 /* STATIC */ 1387 1388 static inline int ufshcd_dme_set(struct ufs_hba *hba, u32 attr_sel, 1389 u32 mib_val) 1390 { 1391 return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR, 1392 mib_val, DME_LOCAL); 1393 } 1394 1395 static inline int ufshcd_dme_st_set(struct ufs_hba *hba, u32 attr_sel, 1396 u32 mib_val) 1397 { 1398 return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST, 1399 mib_val, DME_LOCAL); 1400 } 1401 1402 static inline int ufshcd_dme_peer_set(struct ufs_hba *hba, u32 attr_sel, 1403 u32 mib_val) 1404 { 1405 return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR, 1406 mib_val, DME_PEER); 1407 } 1408 1409 static inline int ufshcd_dme_peer_st_set(struct ufs_hba *hba, u32 attr_sel, 1410 u32 mib_val) 1411 { 1412 return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST, 1413 mib_val, DME_PEER); 1414 } 1415 1416 static inline int ufshcd_dme_get(struct ufs_hba *hba, 1417 u32 attr_sel, u32 *mib_val) 1418 { 1419 return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_LOCAL); 1420 } 1421 1422 static inline int ufshcd_dme_peer_get(struct ufs_hba *hba, 1423 u32 attr_sel, u32 *mib_val) 1424 { 1425 return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_PEER); 1426 } 1427 1428 static inline bool ufshcd_is_hs_mode(struct ufs_pa_layer_attr *pwr_info) 1429 { 1430 return (pwr_info->pwr_rx == FAST_MODE || 1431 pwr_info->pwr_rx == FASTAUTO_MODE) && 1432 (pwr_info->pwr_tx == FAST_MODE || 1433 pwr_info->pwr_tx == FASTAUTO_MODE); 1434 } 1435 1436 static inline int ufshcd_disable_host_tx_lcc(struct ufs_hba *hba) 1437 { 1438 return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0); 1439 } 1440 1441 void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit); 1442 void ufshcd_fixup_dev_quirks(struct ufs_hba *hba, 1443 const struct ufs_dev_quirk *fixups); 1444 #define SD_ASCII_STD true 1445 #define SD_RAW false 1446 int ufshcd_read_string_desc(struct ufs_hba *hba, u8 desc_index, 1447 u8 **buf, bool ascii); 1448 1449 void ufshcd_hold(struct ufs_hba *hba); 1450 void ufshcd_release(struct ufs_hba *hba); 1451 1452 void ufshcd_clkgate_delay_set(struct device *dev, unsigned long value); 1453 1454 int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg); 1455 1456 int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd); 1457 1458 int ufshcd_advanced_rpmb_req_handler(struct ufs_hba *hba, struct utp_upiu_req *req_upiu, 1459 struct utp_upiu_req *rsp_upiu, struct ufs_ehs *ehs_req, 1460 struct ufs_ehs *ehs_rsp, int sg_cnt, 1461 struct scatterlist *sg_list, enum dma_data_direction dir); 1462 int ufshcd_wb_toggle(struct ufs_hba *hba, bool enable); 1463 int ufshcd_wb_toggle_buf_flush(struct ufs_hba *hba, bool enable); 1464 int ufshcd_suspend_prepare(struct device *dev); 1465 int __ufshcd_suspend_prepare(struct device *dev, bool rpm_ok_for_spm); 1466 void ufshcd_resume_complete(struct device *dev); 1467 bool ufshcd_is_hba_active(struct ufs_hba *hba); 1468 void ufshcd_pm_qos_init(struct ufs_hba *hba); 1469 void ufshcd_pm_qos_exit(struct ufs_hba *hba); 1470 1471 /* Wrapper functions for safely calling variant operations */ 1472 static inline int ufshcd_vops_init(struct ufs_hba *hba) 1473 { 1474 if (hba->vops && hba->vops->init) 1475 return hba->vops->init(hba); 1476 1477 return 0; 1478 } 1479 1480 static inline int ufshcd_vops_phy_initialization(struct ufs_hba *hba) 1481 { 1482 if (hba->vops && hba->vops->phy_initialization) 1483 return hba->vops->phy_initialization(hba); 1484 1485 return 0; 1486 } 1487 1488 extern const struct ufs_pm_lvl_states ufs_pm_lvl_states[]; 1489 1490 int ufshcd_dump_regs(struct ufs_hba *hba, size_t offset, size_t len, 1491 const char *prefix); 1492 1493 int __ufshcd_write_ee_control(struct ufs_hba *hba, u32 ee_ctrl_mask); 1494 int ufshcd_write_ee_control(struct ufs_hba *hba); 1495 int ufshcd_update_ee_control(struct ufs_hba *hba, u16 *mask, 1496 const u16 *other_mask, u16 set, u16 clr); 1497 1498 #endif /* End of Header */ 1499