xref: /linux/include/uapi/linux/nl80211-vnd-intel.h (revision 4b132aacb0768ac1e652cf517097ea6f237214b9)
1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2 /*
3  * Copyright (C) 2012-2014, 2018-2021 Intel Corporation
4  * Copyright (C) 2013-2015 Intel Mobile Communications GmbH
5  * Copyright (C) 2016-2017 Intel Deutschland GmbH
6  */
7 #ifndef __VENDOR_CMD_INTEL_H__
8 #define __VENDOR_CMD_INTEL_H__
9 
10 #define INTEL_OUI	0x001735
11 
12 /**
13  * enum iwl_mvm_vendor_cmd - supported vendor commands
14  * @IWL_MVM_VENDOR_CMD_GET_CSME_CONN_INFO: reports CSME connection info.
15  * @IWL_MVM_VENDOR_CMD_HOST_GET_OWNERSHIP: asks for ownership on the device.
16  *	This is useful when the CSME firmware owns the device and the kernel
17  *	wants to use it. In case the CSME firmware has no connection active the
18  *	kernel will manage on its own to get ownership of the device.
19  *	When the CSME firmware has an active connection, the user space
20  *	involvement is required. The kernel will assert the RFKILL signal with
21  *	the "device not owned" reason so that nobody can touch the device. Then
22  *	the user space can run the following flow to be able to get connected
23  *	to the very same AP the CSME firmware is currently connected to:
24  *
25  *	1) The user space (NetworkManager) boots and sees that the device is
26  *	    in RFKILL because the host doesn't own the device
27  *	2) The user space asks the kernel what AP the CSME firmware is
28  *	   connected to (with %IWL_MVM_VENDOR_CMD_GET_CSME_CONN_INFO)
29  *	3) The user space checks if it has a profile that matches the reply
30  *	   from the CSME firmware
31  *	4) The user space installs a network to the wpa_supplicant with a
32  *	   specific BSSID and a specific frequency
33  *	5) The user space prevents any type of full scan
34  *	6) The user space asks iwlmei to request ownership on the device (with
35  *	   this command)
36  *	7) iwlmei requests ownership from the CSME firmware
37  *	8) The CSME firmware grants ownership
38  *	9) iwlmei tells iwlwifi to lift the RFKILL
39  *	10) RFKILL OFF is reported to user space
40  *	11) The host boots the device, loads the firwmare, and connects to a
41  *	    specific BSSID without scanning including IP as fast as it can
42  *	12) The host reports to the CSME firmware that there is a connection
43  *	13) The TCP connection is preserved and the host has connectivity
44  *
45  * @IWL_MVM_VENDOR_CMD_ROAMING_FORBIDDEN_EVENT: notifies if roaming is allowed.
46  *	It contains a &IWL_MVM_VENDOR_ATTR_ROAMING_FORBIDDEN and a
47  *	&IWL_MVM_VENDOR_ATTR_VIF_ADDR attributes.
48  */
49 
50 enum iwl_mvm_vendor_cmd {
51 	IWL_MVM_VENDOR_CMD_GET_CSME_CONN_INFO			= 0x2d,
52 	IWL_MVM_VENDOR_CMD_HOST_GET_OWNERSHIP			= 0x30,
53 	IWL_MVM_VENDOR_CMD_ROAMING_FORBIDDEN_EVENT		= 0x32,
54 };
55 
56 enum iwl_vendor_auth_akm_mode {
57 	IWL_VENDOR_AUTH_OPEN,
58 	IWL_VENDOR_AUTH_RSNA = 0x6,
59 	IWL_VENDOR_AUTH_RSNA_PSK,
60 	IWL_VENDOR_AUTH_SAE = 0x9,
61 	IWL_VENDOR_AUTH_MAX,
62 };
63 
64 /**
65  * enum iwl_mvm_vendor_attr - attributes used in vendor commands
66  * @__IWL_MVM_VENDOR_ATTR_INVALID: attribute 0 is invalid
67  * @IWL_MVM_VENDOR_ATTR_VIF_ADDR: interface MAC address
68  * @IWL_MVM_VENDOR_ATTR_ADDR: MAC address
69  * @IWL_MVM_VENDOR_ATTR_SSID: SSID (binary attribute, 0..32 octets)
70  * @IWL_MVM_VENDOR_ATTR_STA_CIPHER: the cipher to use for the station with the
71  *	mac address specified in &IWL_MVM_VENDOR_ATTR_ADDR.
72  * @IWL_MVM_VENDOR_ATTR_ROAMING_FORBIDDEN: u8 attribute. Indicates whether
73  *	roaming is forbidden or not. Value 1 means roaming is forbidden,
74  *	0 mean roaming is allowed.
75  * @IWL_MVM_VENDOR_ATTR_AUTH_MODE: u32 attribute. Authentication mode type
76  *	as specified in &enum iwl_vendor_auth_akm_mode.
77  * @IWL_MVM_VENDOR_ATTR_CHANNEL_NUM: u8 attribute. Contains channel number.
78  * @IWL_MVM_VENDOR_ATTR_BAND: u8 attribute.
79  *	0 for 2.4 GHz band, 1 for 5.2GHz band and 2 for 6GHz band.
80  * @IWL_MVM_VENDOR_ATTR_COLLOC_CHANNEL: u32 attribute. Channel number of
81  *	collocated AP. Relevant for 6GHz AP info.
82  * @IWL_MVM_VENDOR_ATTR_COLLOC_ADDR: MAC address of a collocated AP.
83  *	Relevant for 6GHz AP info.
84  *
85  * @NUM_IWL_MVM_VENDOR_ATTR: number of vendor attributes
86  * @MAX_IWL_MVM_VENDOR_ATTR: highest vendor attribute number
87 
88  */
89 enum iwl_mvm_vendor_attr {
90 	__IWL_MVM_VENDOR_ATTR_INVALID				= 0x00,
91 	IWL_MVM_VENDOR_ATTR_VIF_ADDR				= 0x02,
92 	IWL_MVM_VENDOR_ATTR_ADDR				= 0x0a,
93 	IWL_MVM_VENDOR_ATTR_SSID				= 0x3d,
94 	IWL_MVM_VENDOR_ATTR_STA_CIPHER				= 0x51,
95 	IWL_MVM_VENDOR_ATTR_ROAMING_FORBIDDEN			= 0x64,
96 	IWL_MVM_VENDOR_ATTR_AUTH_MODE				= 0x65,
97 	IWL_MVM_VENDOR_ATTR_CHANNEL_NUM				= 0x66,
98 	IWL_MVM_VENDOR_ATTR_BAND				= 0x69,
99 	IWL_MVM_VENDOR_ATTR_COLLOC_CHANNEL			= 0x70,
100 	IWL_MVM_VENDOR_ATTR_COLLOC_ADDR				= 0x71,
101 
102 	NUM_IWL_MVM_VENDOR_ATTR,
103 	MAX_IWL_MVM_VENDOR_ATTR = NUM_IWL_MVM_VENDOR_ATTR - 1,
104 };
105 
106 #endif /* __VENDOR_CMD_INTEL_H__ */
107