1 /* 2 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie> 3 * Copyright (c) 2007 Jakob Bornecrantz <wallbraker@gmail.com> 4 * Copyright (c) 2008 Red Hat Inc. 5 * Copyright (c) 2007-2008 Tungsten Graphics, Inc., Cedar Park, TX., USA 6 * Copyright (c) 2007-2008 Intel Corporation 7 * 8 * Permission is hereby granted, free of charge, to any person obtaining a 9 * copy of this software and associated documentation files (the "Software"), 10 * to deal in the Software without restriction, including without limitation 11 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 12 * and/or sell copies of the Software, and to permit persons to whom the 13 * Software is furnished to do so, subject to the following conditions: 14 * 15 * The above copyright notice and this permission notice shall be included in 16 * all copies or substantial portions of the Software. 17 * 18 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 19 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 20 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 21 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 22 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 23 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS 24 * IN THE SOFTWARE. 25 */ 26 27 #ifndef _DRM_MODE_H 28 #define _DRM_MODE_H 29 30 #include "drm.h" 31 32 #if defined(__cplusplus) 33 extern "C" { 34 #endif 35 36 /** 37 * DOC: overview 38 * 39 * DRM exposes many UAPI and structure definitions to have a consistent 40 * and standardized interface with users. 41 * Userspace can refer to these structure definitions and UAPI formats 42 * to communicate to drivers. 43 */ 44 45 #define DRM_CONNECTOR_NAME_LEN 32 46 #define DRM_DISPLAY_MODE_LEN 32 47 #define DRM_PROP_NAME_LEN 32 48 49 #define DRM_MODE_TYPE_BUILTIN (1<<0) /* deprecated */ 50 #define DRM_MODE_TYPE_CLOCK_C ((1<<1) | DRM_MODE_TYPE_BUILTIN) /* deprecated */ 51 #define DRM_MODE_TYPE_CRTC_C ((1<<2) | DRM_MODE_TYPE_BUILTIN) /* deprecated */ 52 #define DRM_MODE_TYPE_PREFERRED (1<<3) 53 #define DRM_MODE_TYPE_DEFAULT (1<<4) /* deprecated */ 54 #define DRM_MODE_TYPE_USERDEF (1<<5) 55 #define DRM_MODE_TYPE_DRIVER (1<<6) 56 57 #define DRM_MODE_TYPE_ALL (DRM_MODE_TYPE_PREFERRED | \ 58 DRM_MODE_TYPE_USERDEF | \ 59 DRM_MODE_TYPE_DRIVER) 60 61 /* Video mode flags */ 62 /* bit compatible with the xrandr RR_ definitions (bits 0-13) 63 * 64 * ABI warning: Existing userspace really expects 65 * the mode flags to match the xrandr definitions. Any 66 * changes that don't match the xrandr definitions will 67 * likely need a new client cap or some other mechanism 68 * to avoid breaking existing userspace. This includes 69 * allocating new flags in the previously unused bits! 70 */ 71 #define DRM_MODE_FLAG_PHSYNC (1<<0) 72 #define DRM_MODE_FLAG_NHSYNC (1<<1) 73 #define DRM_MODE_FLAG_PVSYNC (1<<2) 74 #define DRM_MODE_FLAG_NVSYNC (1<<3) 75 #define DRM_MODE_FLAG_INTERLACE (1<<4) 76 #define DRM_MODE_FLAG_DBLSCAN (1<<5) 77 #define DRM_MODE_FLAG_CSYNC (1<<6) 78 #define DRM_MODE_FLAG_PCSYNC (1<<7) 79 #define DRM_MODE_FLAG_NCSYNC (1<<8) 80 #define DRM_MODE_FLAG_HSKEW (1<<9) /* hskew provided */ 81 #define DRM_MODE_FLAG_BCAST (1<<10) /* deprecated */ 82 #define DRM_MODE_FLAG_PIXMUX (1<<11) /* deprecated */ 83 #define DRM_MODE_FLAG_DBLCLK (1<<12) 84 #define DRM_MODE_FLAG_CLKDIV2 (1<<13) 85 /* 86 * When adding a new stereo mode don't forget to adjust DRM_MODE_FLAGS_3D_MAX 87 * (define not exposed to user space). 88 */ 89 #define DRM_MODE_FLAG_3D_MASK (0x1f<<14) 90 #define DRM_MODE_FLAG_3D_NONE (0<<14) 91 #define DRM_MODE_FLAG_3D_FRAME_PACKING (1<<14) 92 #define DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE (2<<14) 93 #define DRM_MODE_FLAG_3D_LINE_ALTERNATIVE (3<<14) 94 #define DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL (4<<14) 95 #define DRM_MODE_FLAG_3D_L_DEPTH (5<<14) 96 #define DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH (6<<14) 97 #define DRM_MODE_FLAG_3D_TOP_AND_BOTTOM (7<<14) 98 #define DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF (8<<14) 99 100 /* Picture aspect ratio options */ 101 #define DRM_MODE_PICTURE_ASPECT_NONE 0 102 #define DRM_MODE_PICTURE_ASPECT_4_3 1 103 #define DRM_MODE_PICTURE_ASPECT_16_9 2 104 #define DRM_MODE_PICTURE_ASPECT_64_27 3 105 #define DRM_MODE_PICTURE_ASPECT_256_135 4 106 107 /* Content type options */ 108 #define DRM_MODE_CONTENT_TYPE_NO_DATA 0 109 #define DRM_MODE_CONTENT_TYPE_GRAPHICS 1 110 #define DRM_MODE_CONTENT_TYPE_PHOTO 2 111 #define DRM_MODE_CONTENT_TYPE_CINEMA 3 112 #define DRM_MODE_CONTENT_TYPE_GAME 4 113 114 /* Aspect ratio flag bitmask (4 bits 22:19) */ 115 #define DRM_MODE_FLAG_PIC_AR_MASK (0x0F<<19) 116 #define DRM_MODE_FLAG_PIC_AR_NONE \ 117 (DRM_MODE_PICTURE_ASPECT_NONE<<19) 118 #define DRM_MODE_FLAG_PIC_AR_4_3 \ 119 (DRM_MODE_PICTURE_ASPECT_4_3<<19) 120 #define DRM_MODE_FLAG_PIC_AR_16_9 \ 121 (DRM_MODE_PICTURE_ASPECT_16_9<<19) 122 #define DRM_MODE_FLAG_PIC_AR_64_27 \ 123 (DRM_MODE_PICTURE_ASPECT_64_27<<19) 124 #define DRM_MODE_FLAG_PIC_AR_256_135 \ 125 (DRM_MODE_PICTURE_ASPECT_256_135<<19) 126 127 #define DRM_MODE_FLAG_ALL (DRM_MODE_FLAG_PHSYNC | \ 128 DRM_MODE_FLAG_NHSYNC | \ 129 DRM_MODE_FLAG_PVSYNC | \ 130 DRM_MODE_FLAG_NVSYNC | \ 131 DRM_MODE_FLAG_INTERLACE | \ 132 DRM_MODE_FLAG_DBLSCAN | \ 133 DRM_MODE_FLAG_CSYNC | \ 134 DRM_MODE_FLAG_PCSYNC | \ 135 DRM_MODE_FLAG_NCSYNC | \ 136 DRM_MODE_FLAG_HSKEW | \ 137 DRM_MODE_FLAG_DBLCLK | \ 138 DRM_MODE_FLAG_CLKDIV2 | \ 139 DRM_MODE_FLAG_3D_MASK) 140 141 /* DPMS flags */ 142 /* bit compatible with the xorg definitions. */ 143 #define DRM_MODE_DPMS_ON 0 144 #define DRM_MODE_DPMS_STANDBY 1 145 #define DRM_MODE_DPMS_SUSPEND 2 146 #define DRM_MODE_DPMS_OFF 3 147 148 /* Scaling mode options */ 149 #define DRM_MODE_SCALE_NONE 0 /* Unmodified timing (display or 150 software can still scale) */ 151 #define DRM_MODE_SCALE_FULLSCREEN 1 /* Full screen, ignore aspect */ 152 #define DRM_MODE_SCALE_CENTER 2 /* Centered, no scaling */ 153 #define DRM_MODE_SCALE_ASPECT 3 /* Full screen, preserve aspect */ 154 155 /* Dithering mode options */ 156 #define DRM_MODE_DITHERING_OFF 0 157 #define DRM_MODE_DITHERING_ON 1 158 #define DRM_MODE_DITHERING_AUTO 2 159 160 /* Dirty info options */ 161 #define DRM_MODE_DIRTY_OFF 0 162 #define DRM_MODE_DIRTY_ON 1 163 #define DRM_MODE_DIRTY_ANNOTATE 2 164 165 /* Link Status options */ 166 #define DRM_MODE_LINK_STATUS_GOOD 0 167 #define DRM_MODE_LINK_STATUS_BAD 1 168 169 /* 170 * DRM_MODE_ROTATE_<degrees> 171 * 172 * Signals that a drm plane is been rotated <degrees> degrees in counter 173 * clockwise direction. 174 * 175 * This define is provided as a convenience, looking up the property id 176 * using the name->prop id lookup is the preferred method. 177 */ 178 #define DRM_MODE_ROTATE_0 (1<<0) 179 #define DRM_MODE_ROTATE_90 (1<<1) 180 #define DRM_MODE_ROTATE_180 (1<<2) 181 #define DRM_MODE_ROTATE_270 (1<<3) 182 183 /* 184 * DRM_MODE_ROTATE_MASK 185 * 186 * Bitmask used to look for drm plane rotations. 187 */ 188 #define DRM_MODE_ROTATE_MASK (\ 189 DRM_MODE_ROTATE_0 | \ 190 DRM_MODE_ROTATE_90 | \ 191 DRM_MODE_ROTATE_180 | \ 192 DRM_MODE_ROTATE_270) 193 194 /* 195 * DRM_MODE_REFLECT_<axis> 196 * 197 * Signals that the contents of a drm plane is reflected along the <axis> axis, 198 * in the same way as mirroring. 199 * See kerneldoc chapter "Plane Composition Properties" for more details. 200 * 201 * This define is provided as a convenience, looking up the property id 202 * using the name->prop id lookup is the preferred method. 203 */ 204 #define DRM_MODE_REFLECT_X (1<<4) 205 #define DRM_MODE_REFLECT_Y (1<<5) 206 207 /* 208 * DRM_MODE_REFLECT_MASK 209 * 210 * Bitmask used to look for drm plane reflections. 211 */ 212 #define DRM_MODE_REFLECT_MASK (\ 213 DRM_MODE_REFLECT_X | \ 214 DRM_MODE_REFLECT_Y) 215 216 /* Content Protection Flags */ 217 #define DRM_MODE_CONTENT_PROTECTION_UNDESIRED 0 218 #define DRM_MODE_CONTENT_PROTECTION_DESIRED 1 219 #define DRM_MODE_CONTENT_PROTECTION_ENABLED 2 220 221 /** 222 * struct drm_mode_modeinfo - Display mode information. 223 * @clock: pixel clock in kHz 224 * @hdisplay: horizontal display size 225 * @hsync_start: horizontal sync start 226 * @hsync_end: horizontal sync end 227 * @htotal: horizontal total size 228 * @hskew: horizontal skew 229 * @vdisplay: vertical display size 230 * @vsync_start: vertical sync start 231 * @vsync_end: vertical sync end 232 * @vtotal: vertical total size 233 * @vscan: vertical scan 234 * @vrefresh: approximate vertical refresh rate in Hz 235 * @flags: bitmask of misc. flags, see DRM_MODE_FLAG_* defines 236 * @type: bitmask of type flags, see DRM_MODE_TYPE_* defines 237 * @name: string describing the mode resolution 238 * 239 * This is the user-space API display mode information structure. For the 240 * kernel version see struct drm_display_mode. 241 */ 242 struct drm_mode_modeinfo { 243 __u32 clock; 244 __u16 hdisplay; 245 __u16 hsync_start; 246 __u16 hsync_end; 247 __u16 htotal; 248 __u16 hskew; 249 __u16 vdisplay; 250 __u16 vsync_start; 251 __u16 vsync_end; 252 __u16 vtotal; 253 __u16 vscan; 254 255 __u32 vrefresh; 256 257 __u32 flags; 258 __u32 type; 259 char name[DRM_DISPLAY_MODE_LEN]; 260 }; 261 262 struct drm_mode_card_res { 263 __u64 fb_id_ptr; 264 __u64 crtc_id_ptr; 265 __u64 connector_id_ptr; 266 __u64 encoder_id_ptr; 267 __u32 count_fbs; 268 __u32 count_crtcs; 269 __u32 count_connectors; 270 __u32 count_encoders; 271 __u32 min_width; 272 __u32 max_width; 273 __u32 min_height; 274 __u32 max_height; 275 }; 276 277 struct drm_mode_crtc { 278 __u64 set_connectors_ptr; 279 __u32 count_connectors; 280 281 __u32 crtc_id; /**< Id */ 282 __u32 fb_id; /**< Id of framebuffer */ 283 284 __u32 x; /**< x Position on the framebuffer */ 285 __u32 y; /**< y Position on the framebuffer */ 286 287 __u32 gamma_size; 288 __u32 mode_valid; 289 struct drm_mode_modeinfo mode; 290 }; 291 292 #define DRM_MODE_PRESENT_TOP_FIELD (1<<0) 293 #define DRM_MODE_PRESENT_BOTTOM_FIELD (1<<1) 294 295 /* Planes blend with or override other bits on the CRTC */ 296 struct drm_mode_set_plane { 297 __u32 plane_id; 298 __u32 crtc_id; 299 __u32 fb_id; /* fb object contains surface format type */ 300 __u32 flags; /* see above flags */ 301 302 /* Signed dest location allows it to be partially off screen */ 303 __s32 crtc_x; 304 __s32 crtc_y; 305 __u32 crtc_w; 306 __u32 crtc_h; 307 308 /* Source values are 16.16 fixed point */ 309 __u32 src_x; 310 __u32 src_y; 311 __u32 src_h; 312 __u32 src_w; 313 }; 314 315 /** 316 * struct drm_mode_get_plane - Get plane metadata. 317 * 318 * Userspace can perform a GETPLANE ioctl to retrieve information about a 319 * plane. 320 * 321 * To retrieve the number of formats supported, set @count_format_types to zero 322 * and call the ioctl. @count_format_types will be updated with the value. 323 * 324 * To retrieve these formats, allocate an array with the memory needed to store 325 * @count_format_types formats. Point @format_type_ptr to this array and call 326 * the ioctl again (with @count_format_types still set to the value returned in 327 * the first ioctl call). 328 */ 329 struct drm_mode_get_plane { 330 /** 331 * @plane_id: Object ID of the plane whose information should be 332 * retrieved. Set by caller. 333 */ 334 __u32 plane_id; 335 336 /** @crtc_id: Object ID of the current CRTC. */ 337 __u32 crtc_id; 338 /** @fb_id: Object ID of the current fb. */ 339 __u32 fb_id; 340 341 /** 342 * @possible_crtcs: Bitmask of CRTC's compatible with the plane. CRTC's 343 * are created and they receive an index, which corresponds to their 344 * position in the bitmask. Bit N corresponds to 345 * :ref:`CRTC index<crtc_index>` N. 346 */ 347 __u32 possible_crtcs; 348 /** @gamma_size: Never used. */ 349 __u32 gamma_size; 350 351 /** @count_format_types: Number of formats. */ 352 __u32 count_format_types; 353 /** 354 * @format_type_ptr: Pointer to ``__u32`` array of formats that are 355 * supported by the plane. These formats do not require modifiers. 356 */ 357 __u64 format_type_ptr; 358 }; 359 360 struct drm_mode_get_plane_res { 361 __u64 plane_id_ptr; 362 __u32 count_planes; 363 }; 364 365 #define DRM_MODE_ENCODER_NONE 0 366 #define DRM_MODE_ENCODER_DAC 1 367 #define DRM_MODE_ENCODER_TMDS 2 368 #define DRM_MODE_ENCODER_LVDS 3 369 #define DRM_MODE_ENCODER_TVDAC 4 370 #define DRM_MODE_ENCODER_VIRTUAL 5 371 #define DRM_MODE_ENCODER_DSI 6 372 #define DRM_MODE_ENCODER_DPMST 7 373 #define DRM_MODE_ENCODER_DPI 8 374 375 struct drm_mode_get_encoder { 376 __u32 encoder_id; 377 __u32 encoder_type; 378 379 __u32 crtc_id; /**< Id of crtc */ 380 381 __u32 possible_crtcs; 382 __u32 possible_clones; 383 }; 384 385 /* This is for connectors with multiple signal types. */ 386 /* Try to match DRM_MODE_CONNECTOR_X as closely as possible. */ 387 enum drm_mode_subconnector { 388 DRM_MODE_SUBCONNECTOR_Automatic = 0, /* DVI-I, TV */ 389 DRM_MODE_SUBCONNECTOR_Unknown = 0, /* DVI-I, TV, DP */ 390 DRM_MODE_SUBCONNECTOR_VGA = 1, /* DP */ 391 DRM_MODE_SUBCONNECTOR_DVID = 3, /* DVI-I DP */ 392 DRM_MODE_SUBCONNECTOR_DVIA = 4, /* DVI-I */ 393 DRM_MODE_SUBCONNECTOR_Composite = 5, /* TV */ 394 DRM_MODE_SUBCONNECTOR_SVIDEO = 6, /* TV */ 395 DRM_MODE_SUBCONNECTOR_Component = 8, /* TV */ 396 DRM_MODE_SUBCONNECTOR_SCART = 9, /* TV */ 397 DRM_MODE_SUBCONNECTOR_DisplayPort = 10, /* DP */ 398 DRM_MODE_SUBCONNECTOR_HDMIA = 11, /* DP */ 399 DRM_MODE_SUBCONNECTOR_Native = 15, /* DP */ 400 DRM_MODE_SUBCONNECTOR_Wireless = 18, /* DP */ 401 }; 402 403 #define DRM_MODE_CONNECTOR_Unknown 0 404 #define DRM_MODE_CONNECTOR_VGA 1 405 #define DRM_MODE_CONNECTOR_DVII 2 406 #define DRM_MODE_CONNECTOR_DVID 3 407 #define DRM_MODE_CONNECTOR_DVIA 4 408 #define DRM_MODE_CONNECTOR_Composite 5 409 #define DRM_MODE_CONNECTOR_SVIDEO 6 410 #define DRM_MODE_CONNECTOR_LVDS 7 411 #define DRM_MODE_CONNECTOR_Component 8 412 #define DRM_MODE_CONNECTOR_9PinDIN 9 413 #define DRM_MODE_CONNECTOR_DisplayPort 10 414 #define DRM_MODE_CONNECTOR_HDMIA 11 415 #define DRM_MODE_CONNECTOR_HDMIB 12 416 #define DRM_MODE_CONNECTOR_TV 13 417 #define DRM_MODE_CONNECTOR_eDP 14 418 #define DRM_MODE_CONNECTOR_VIRTUAL 15 419 #define DRM_MODE_CONNECTOR_DSI 16 420 #define DRM_MODE_CONNECTOR_DPI 17 421 #define DRM_MODE_CONNECTOR_WRITEBACK 18 422 #define DRM_MODE_CONNECTOR_SPI 19 423 #define DRM_MODE_CONNECTOR_USB 20 424 425 /** 426 * struct drm_mode_get_connector - Get connector metadata. 427 * 428 * User-space can perform a GETCONNECTOR ioctl to retrieve information about a 429 * connector. User-space is expected to retrieve encoders, modes and properties 430 * by performing this ioctl at least twice: the first time to retrieve the 431 * number of elements, the second time to retrieve the elements themselves. 432 * 433 * To retrieve the number of elements, set @count_props and @count_encoders to 434 * zero, set @count_modes to 1, and set @modes_ptr to a temporary struct 435 * drm_mode_modeinfo element. 436 * 437 * To retrieve the elements, allocate arrays for @encoders_ptr, @modes_ptr, 438 * @props_ptr and @prop_values_ptr, then set @count_modes, @count_props and 439 * @count_encoders to their capacity. 440 * 441 * Performing the ioctl only twice may be racy: the number of elements may have 442 * changed with a hotplug event in-between the two ioctls. User-space is 443 * expected to retry the last ioctl until the number of elements stabilizes. 444 * The kernel won't fill any array which doesn't have the expected length. 445 * 446 * **Force-probing a connector** 447 * 448 * If the @count_modes field is set to zero and the DRM client is the current 449 * DRM master, the kernel will perform a forced probe on the connector to 450 * refresh the connector status, modes and EDID. A forced-probe can be slow, 451 * might cause flickering and the ioctl will block. 452 * 453 * User-space needs to force-probe connectors to ensure their metadata is 454 * up-to-date at startup and after receiving a hot-plug event. User-space 455 * may perform a forced-probe when the user explicitly requests it. User-space 456 * shouldn't perform a forced-probe in other situations. 457 */ 458 struct drm_mode_get_connector { 459 /** @encoders_ptr: Pointer to ``__u32`` array of object IDs. */ 460 __u64 encoders_ptr; 461 /** @modes_ptr: Pointer to struct drm_mode_modeinfo array. */ 462 __u64 modes_ptr; 463 /** @props_ptr: Pointer to ``__u32`` array of property IDs. */ 464 __u64 props_ptr; 465 /** @prop_values_ptr: Pointer to ``__u64`` array of property values. */ 466 __u64 prop_values_ptr; 467 468 /** @count_modes: Number of modes. */ 469 __u32 count_modes; 470 /** @count_props: Number of properties. */ 471 __u32 count_props; 472 /** @count_encoders: Number of encoders. */ 473 __u32 count_encoders; 474 475 /** @encoder_id: Object ID of the current encoder. */ 476 __u32 encoder_id; 477 /** @connector_id: Object ID of the connector. */ 478 __u32 connector_id; 479 /** 480 * @connector_type: Type of the connector. 481 * 482 * See DRM_MODE_CONNECTOR_* defines. 483 */ 484 __u32 connector_type; 485 /** 486 * @connector_type_id: Type-specific connector number. 487 * 488 * This is not an object ID. This is a per-type connector number. Each 489 * (type, type_id) combination is unique across all connectors of a DRM 490 * device. 491 * 492 * The (type, type_id) combination is not a stable identifier: the 493 * type_id can change depending on the driver probe order. 494 */ 495 __u32 connector_type_id; 496 497 /** 498 * @connection: Status of the connector. 499 * 500 * See enum drm_connector_status. 501 */ 502 __u32 connection; 503 /** @mm_width: Width of the connected sink in millimeters. */ 504 __u32 mm_width; 505 /** @mm_height: Height of the connected sink in millimeters. */ 506 __u32 mm_height; 507 /** 508 * @subpixel: Subpixel order of the connected sink. 509 * 510 * See enum subpixel_order. 511 */ 512 __u32 subpixel; 513 514 /** @pad: Padding, must be zero. */ 515 __u32 pad; 516 }; 517 518 #define DRM_MODE_PROP_PENDING (1<<0) /* deprecated, do not use */ 519 #define DRM_MODE_PROP_RANGE (1<<1) 520 #define DRM_MODE_PROP_IMMUTABLE (1<<2) 521 #define DRM_MODE_PROP_ENUM (1<<3) /* enumerated type with text strings */ 522 #define DRM_MODE_PROP_BLOB (1<<4) 523 #define DRM_MODE_PROP_BITMASK (1<<5) /* bitmask of enumerated types */ 524 525 /* non-extended types: legacy bitmask, one bit per type: */ 526 #define DRM_MODE_PROP_LEGACY_TYPE ( \ 527 DRM_MODE_PROP_RANGE | \ 528 DRM_MODE_PROP_ENUM | \ 529 DRM_MODE_PROP_BLOB | \ 530 DRM_MODE_PROP_BITMASK) 531 532 /* extended-types: rather than continue to consume a bit per type, 533 * grab a chunk of the bits to use as integer type id. 534 */ 535 #define DRM_MODE_PROP_EXTENDED_TYPE 0x0000ffc0 536 #define DRM_MODE_PROP_TYPE(n) ((n) << 6) 537 #define DRM_MODE_PROP_OBJECT DRM_MODE_PROP_TYPE(1) 538 #define DRM_MODE_PROP_SIGNED_RANGE DRM_MODE_PROP_TYPE(2) 539 540 /* the PROP_ATOMIC flag is used to hide properties from userspace that 541 * is not aware of atomic properties. This is mostly to work around 542 * older userspace (DDX drivers) that read/write each prop they find, 543 * without being aware that this could be triggering a lengthy modeset. 544 */ 545 #define DRM_MODE_PROP_ATOMIC 0x80000000 546 547 /** 548 * struct drm_mode_property_enum - Description for an enum/bitfield entry. 549 * @value: numeric value for this enum entry. 550 * @name: symbolic name for this enum entry. 551 * 552 * See struct drm_property_enum for details. 553 */ 554 struct drm_mode_property_enum { 555 __u64 value; 556 char name[DRM_PROP_NAME_LEN]; 557 }; 558 559 /** 560 * struct drm_mode_get_property - Get property metadata. 561 * 562 * User-space can perform a GETPROPERTY ioctl to retrieve information about a 563 * property. The same property may be attached to multiple objects, see 564 * "Modeset Base Object Abstraction". 565 * 566 * The meaning of the @values_ptr field changes depending on the property type. 567 * See &drm_property.flags for more details. 568 * 569 * The @enum_blob_ptr and @count_enum_blobs fields are only meaningful when the 570 * property has the type &DRM_MODE_PROP_ENUM or &DRM_MODE_PROP_BITMASK. For 571 * backwards compatibility, the kernel will always set @count_enum_blobs to 572 * zero when the property has the type &DRM_MODE_PROP_BLOB. User-space must 573 * ignore these two fields if the property has a different type. 574 * 575 * User-space is expected to retrieve values and enums by performing this ioctl 576 * at least twice: the first time to retrieve the number of elements, the 577 * second time to retrieve the elements themselves. 578 * 579 * To retrieve the number of elements, set @count_values and @count_enum_blobs 580 * to zero, then call the ioctl. @count_values will be updated with the number 581 * of elements. If the property has the type &DRM_MODE_PROP_ENUM or 582 * &DRM_MODE_PROP_BITMASK, @count_enum_blobs will be updated as well. 583 * 584 * To retrieve the elements themselves, allocate an array for @values_ptr and 585 * set @count_values to its capacity. If the property has the type 586 * &DRM_MODE_PROP_ENUM or &DRM_MODE_PROP_BITMASK, allocate an array for 587 * @enum_blob_ptr and set @count_enum_blobs to its capacity. Calling the ioctl 588 * again will fill the arrays. 589 */ 590 struct drm_mode_get_property { 591 /** @values_ptr: Pointer to a ``__u64`` array. */ 592 __u64 values_ptr; 593 /** @enum_blob_ptr: Pointer to a struct drm_mode_property_enum array. */ 594 __u64 enum_blob_ptr; 595 596 /** 597 * @prop_id: Object ID of the property which should be retrieved. Set 598 * by the caller. 599 */ 600 __u32 prop_id; 601 /** 602 * @flags: ``DRM_MODE_PROP_*`` bitfield. See &drm_property.flags for 603 * a definition of the flags. 604 */ 605 __u32 flags; 606 /** 607 * @name: Symbolic property name. User-space should use this field to 608 * recognize properties. 609 */ 610 char name[DRM_PROP_NAME_LEN]; 611 612 /** @count_values: Number of elements in @values_ptr. */ 613 __u32 count_values; 614 /** @count_enum_blobs: Number of elements in @enum_blob_ptr. */ 615 __u32 count_enum_blobs; 616 }; 617 618 struct drm_mode_connector_set_property { 619 __u64 value; 620 __u32 prop_id; 621 __u32 connector_id; 622 }; 623 624 #define DRM_MODE_OBJECT_CRTC 0xcccccccc 625 #define DRM_MODE_OBJECT_CONNECTOR 0xc0c0c0c0 626 #define DRM_MODE_OBJECT_ENCODER 0xe0e0e0e0 627 #define DRM_MODE_OBJECT_MODE 0xdededede 628 #define DRM_MODE_OBJECT_PROPERTY 0xb0b0b0b0 629 #define DRM_MODE_OBJECT_FB 0xfbfbfbfb 630 #define DRM_MODE_OBJECT_BLOB 0xbbbbbbbb 631 #define DRM_MODE_OBJECT_PLANE 0xeeeeeeee 632 #define DRM_MODE_OBJECT_COLOROP 0xfafafafa 633 #define DRM_MODE_OBJECT_ANY 0 634 635 struct drm_mode_obj_get_properties { 636 __u64 props_ptr; 637 __u64 prop_values_ptr; 638 __u32 count_props; 639 __u32 obj_id; 640 __u32 obj_type; 641 }; 642 643 struct drm_mode_obj_set_property { 644 __u64 value; 645 __u32 prop_id; 646 __u32 obj_id; 647 __u32 obj_type; 648 }; 649 650 struct drm_mode_get_blob { 651 __u32 blob_id; 652 __u32 length; 653 __u64 data; 654 }; 655 656 struct drm_mode_fb_cmd { 657 __u32 fb_id; 658 __u32 width; 659 __u32 height; 660 __u32 pitch; 661 __u32 bpp; 662 __u32 depth; 663 /* driver specific handle */ 664 __u32 handle; 665 }; 666 667 #define DRM_MODE_FB_INTERLACED (1<<0) /* for interlaced framebuffers */ 668 #define DRM_MODE_FB_MODIFIERS (1<<1) /* enables ->modifier[] */ 669 670 /** 671 * struct drm_mode_fb_cmd2 - Frame-buffer metadata. 672 * 673 * This struct holds frame-buffer metadata. There are two ways to use it: 674 * 675 * - User-space can fill this struct and perform a &DRM_IOCTL_MODE_ADDFB2 676 * ioctl to register a new frame-buffer. The new frame-buffer object ID will 677 * be set by the kernel in @fb_id. 678 * - User-space can set @fb_id and perform a &DRM_IOCTL_MODE_GETFB2 ioctl to 679 * fetch metadata about an existing frame-buffer. 680 * 681 * In case of planar formats, this struct allows up to 4 buffer objects with 682 * offsets and pitches per plane. The pitch and offset order are dictated by 683 * the format FourCC as defined by ``drm_fourcc.h``, e.g. NV12 is described as: 684 * 685 * YUV 4:2:0 image with a plane of 8-bit Y samples followed by an 686 * interleaved U/V plane containing 8-bit 2x2 subsampled colour difference 687 * samples. 688 * 689 * So it would consist of a Y plane at ``offsets[0]`` and a UV plane at 690 * ``offsets[1]``. 691 * 692 * To accommodate tiled, compressed, etc formats, a modifier can be specified. 693 * For more information see the "Format Modifiers" section. Note that even 694 * though it looks like we have a modifier per-plane, we in fact do not. The 695 * modifier for each plane must be identical. Thus all combinations of 696 * different data layouts for multi-plane formats must be enumerated as 697 * separate modifiers. 698 * 699 * All of the entries in @handles, @pitches, @offsets and @modifier must be 700 * zero when unused. Warning, for @offsets and @modifier zero can't be used to 701 * figure out whether the entry is used or not since it's a valid value (a zero 702 * offset is common, and a zero modifier is &DRM_FORMAT_MOD_LINEAR). 703 */ 704 struct drm_mode_fb_cmd2 { 705 /** @fb_id: Object ID of the frame-buffer. */ 706 __u32 fb_id; 707 /** @width: Width of the frame-buffer. */ 708 __u32 width; 709 /** @height: Height of the frame-buffer. */ 710 __u32 height; 711 /** 712 * @pixel_format: FourCC format code, see ``DRM_FORMAT_*`` constants in 713 * ``drm_fourcc.h``. 714 */ 715 __u32 pixel_format; 716 /** 717 * @flags: Frame-buffer flags (see &DRM_MODE_FB_INTERLACED and 718 * &DRM_MODE_FB_MODIFIERS). 719 */ 720 __u32 flags; 721 722 /** 723 * @handles: GEM buffer handle, one per plane. Set to 0 if the plane is 724 * unused. The same handle can be used for multiple planes. 725 */ 726 __u32 handles[4]; 727 /** @pitches: Pitch (aka. stride) in bytes, one per plane. */ 728 __u32 pitches[4]; 729 /** @offsets: Offset into the buffer in bytes, one per plane. */ 730 __u32 offsets[4]; 731 /** 732 * @modifier: Format modifier, one per plane. See ``DRM_FORMAT_MOD_*`` 733 * constants in ``drm_fourcc.h``. All planes must use the same 734 * modifier. Ignored unless &DRM_MODE_FB_MODIFIERS is set in @flags. 735 */ 736 __u64 modifier[4]; 737 }; 738 739 #define DRM_MODE_FB_DIRTY_ANNOTATE_COPY 0x01 740 #define DRM_MODE_FB_DIRTY_ANNOTATE_FILL 0x02 741 #define DRM_MODE_FB_DIRTY_FLAGS 0x03 742 743 #define DRM_MODE_FB_DIRTY_MAX_CLIPS 256 744 745 /* 746 * Mark a region of a framebuffer as dirty. 747 * 748 * Some hardware does not automatically update display contents 749 * as a hardware or software draw to a framebuffer. This ioctl 750 * allows userspace to tell the kernel and the hardware what 751 * regions of the framebuffer have changed. 752 * 753 * The kernel or hardware is free to update more then just the 754 * region specified by the clip rects. The kernel or hardware 755 * may also delay and/or coalesce several calls to dirty into a 756 * single update. 757 * 758 * Userspace may annotate the updates, the annotates are a 759 * promise made by the caller that the change is either a copy 760 * of pixels or a fill of a single color in the region specified. 761 * 762 * If the DRM_MODE_FB_DIRTY_ANNOTATE_COPY flag is given then 763 * the number of updated regions are half of num_clips given, 764 * where the clip rects are paired in src and dst. The width and 765 * height of each one of the pairs must match. 766 * 767 * If the DRM_MODE_FB_DIRTY_ANNOTATE_FILL flag is given the caller 768 * promises that the region specified of the clip rects is filled 769 * completely with a single color as given in the color argument. 770 */ 771 772 struct drm_mode_fb_dirty_cmd { 773 __u32 fb_id; 774 __u32 flags; 775 __u32 color; 776 __u32 num_clips; 777 __u64 clips_ptr; 778 }; 779 780 struct drm_mode_mode_cmd { 781 __u32 connector_id; 782 struct drm_mode_modeinfo mode; 783 }; 784 785 #define DRM_MODE_CURSOR_BO 0x01 786 #define DRM_MODE_CURSOR_MOVE 0x02 787 #define DRM_MODE_CURSOR_FLAGS 0x03 788 789 /* 790 * depending on the value in flags different members are used. 791 * 792 * CURSOR_BO uses 793 * crtc_id 794 * width 795 * height 796 * handle - if 0 turns the cursor off 797 * 798 * CURSOR_MOVE uses 799 * crtc_id 800 * x 801 * y 802 */ 803 struct drm_mode_cursor { 804 __u32 flags; 805 __u32 crtc_id; 806 __s32 x; 807 __s32 y; 808 __u32 width; 809 __u32 height; 810 /* driver specific handle */ 811 __u32 handle; 812 }; 813 814 struct drm_mode_cursor2 { 815 __u32 flags; 816 __u32 crtc_id; 817 __s32 x; 818 __s32 y; 819 __u32 width; 820 __u32 height; 821 /* driver specific handle */ 822 __u32 handle; 823 __s32 hot_x; 824 __s32 hot_y; 825 }; 826 827 struct drm_mode_crtc_lut { 828 __u32 crtc_id; 829 __u32 gamma_size; 830 831 /* pointers to arrays */ 832 __u64 red; 833 __u64 green; 834 __u64 blue; 835 }; 836 837 struct drm_color_ctm { 838 /* 839 * Conversion matrix in S31.32 sign-magnitude 840 * (not two's complement!) format. 841 * 842 * out matrix in 843 * |R| |0 1 2| |R| 844 * |G| = |3 4 5| x |G| 845 * |B| |6 7 8| |B| 846 */ 847 __u64 matrix[9]; 848 }; 849 850 struct drm_color_ctm_3x4 { 851 /* 852 * Conversion matrix with 3x4 dimensions in S31.32 sign-magnitude 853 * (not two's complement!) format. 854 * 855 * out matrix in 856 * |R| |0 1 2 3 | | R | 857 * |G| = |4 5 6 7 | x | G | 858 * |B| |8 9 10 11| | B | 859 * |1.0| 860 */ 861 __u64 matrix[12]; 862 }; 863 864 struct drm_color_lut { 865 /* 866 * Values are mapped linearly to 0.0 - 1.0 range, with 0x0 == 0.0 and 867 * 0xffff == 1.0. 868 */ 869 __u16 red; 870 __u16 green; 871 __u16 blue; 872 __u16 reserved; 873 }; 874 875 /** 876 * enum drm_colorop_type - Type of color operation 877 * 878 * drm_colorops can be of many different types. Each type behaves differently 879 * and defines a different set of properties. This enum defines all types and 880 * gives a high-level description. 881 */ 882 enum drm_colorop_type { 883 /** 884 * @DRM_COLOROP_1D_CURVE: 885 * 886 * enum string "1D Curve" 887 * 888 * A 1D curve that is being applied to all color channels. The 889 * curve is specified via the CURVE_1D_TYPE colorop property. 890 */ 891 DRM_COLOROP_1D_CURVE, 892 893 /** 894 * @DRM_COLOROP_CTM_3X4: 895 * 896 * enum string "3x4 Matrix" 897 * 898 * A 3x4 matrix. Its values are specified via the 899 * &drm_color_ctm_3x4 struct provided via the DATA property. 900 * 901 * The DATA blob is a float[12]: 902 * out matrix in 903 * | R | | 0 1 2 3 | | R | 904 * | G | = | 4 5 6 7 | x | G | 905 * | B | | 8 9 10 12 | | B | 906 */ 907 DRM_COLOROP_CTM_3X4, 908 }; 909 910 /** 911 * struct drm_plane_size_hint - Plane size hints 912 * @width: The width of the plane in pixel 913 * @height: The height of the plane in pixel 914 * 915 * The plane SIZE_HINTS property blob contains an 916 * array of struct drm_plane_size_hint. 917 */ 918 struct drm_plane_size_hint { 919 __u16 width; 920 __u16 height; 921 }; 922 923 /** 924 * struct hdr_metadata_infoframe - HDR Metadata Infoframe Data. 925 * 926 * HDR Metadata Infoframe as per CTA 861.G spec. This is expected 927 * to match exactly with the spec. 928 * 929 * Userspace is expected to pass the metadata information as per 930 * the format described in this structure. 931 */ 932 struct hdr_metadata_infoframe { 933 /** 934 * @eotf: Electro-Optical Transfer Function (EOTF) 935 * used in the stream. 936 */ 937 __u8 eotf; 938 /** 939 * @metadata_type: Static_Metadata_Descriptor_ID. 940 */ 941 __u8 metadata_type; 942 /** 943 * @display_primaries: Color Primaries of the Data. 944 * These are coded as unsigned 16-bit values in units of 945 * 0.00002, where 0x0000 represents zero and 0xC350 946 * represents 1.0000. 947 * @display_primaries.x: X coordinate of color primary. 948 * @display_primaries.y: Y coordinate of color primary. 949 */ 950 struct { 951 __u16 x, y; 952 } display_primaries[3]; 953 /** 954 * @white_point: White Point of Colorspace Data. 955 * These are coded as unsigned 16-bit values in units of 956 * 0.00002, where 0x0000 represents zero and 0xC350 957 * represents 1.0000. 958 * @white_point.x: X coordinate of whitepoint of color primary. 959 * @white_point.y: Y coordinate of whitepoint of color primary. 960 */ 961 struct { 962 __u16 x, y; 963 } white_point; 964 /** 965 * @max_display_mastering_luminance: Max Mastering Display Luminance. 966 * This value is coded as an unsigned 16-bit value in units of 1 cd/m2, 967 * where 0x0001 represents 1 cd/m2 and 0xFFFF represents 65535 cd/m2. 968 */ 969 __u16 max_display_mastering_luminance; 970 /** 971 * @min_display_mastering_luminance: Min Mastering Display Luminance. 972 * This value is coded as an unsigned 16-bit value in units of 973 * 0.0001 cd/m2, where 0x0001 represents 0.0001 cd/m2 and 0xFFFF 974 * represents 6.5535 cd/m2. 975 */ 976 __u16 min_display_mastering_luminance; 977 /** 978 * @max_cll: Max Content Light Level. 979 * This value is coded as an unsigned 16-bit value in units of 1 cd/m2, 980 * where 0x0001 represents 1 cd/m2 and 0xFFFF represents 65535 cd/m2. 981 */ 982 __u16 max_cll; 983 /** 984 * @max_fall: Max Frame Average Light Level. 985 * This value is coded as an unsigned 16-bit value in units of 1 cd/m2, 986 * where 0x0001 represents 1 cd/m2 and 0xFFFF represents 65535 cd/m2. 987 */ 988 __u16 max_fall; 989 }; 990 991 /** 992 * struct hdr_output_metadata - HDR output metadata 993 * 994 * Metadata Information to be passed from userspace 995 */ 996 struct hdr_output_metadata { 997 /** 998 * @metadata_type: Static_Metadata_Descriptor_ID. 999 */ 1000 __u32 metadata_type; 1001 /** 1002 * @hdmi_metadata_type1: HDR Metadata Infoframe. 1003 */ 1004 union { 1005 struct hdr_metadata_infoframe hdmi_metadata_type1; 1006 }; 1007 }; 1008 1009 /** 1010 * DRM_MODE_PAGE_FLIP_EVENT 1011 * 1012 * Request that the kernel sends back a vblank event (see 1013 * struct drm_event_vblank) with the &DRM_EVENT_FLIP_COMPLETE type when the 1014 * page-flip is done. 1015 * 1016 * When used with atomic uAPI, one event will be delivered per CRTC included in 1017 * the atomic commit. A CRTC is included in an atomic commit if one of its 1018 * properties is set, or if a property is set on a connector or plane linked 1019 * via the CRTC_ID property to the CRTC. At least one CRTC must be included, 1020 * and all pulled in CRTCs must be either previously or newly powered on (in 1021 * other words, a powered off CRTC which stays off cannot be included in the 1022 * atomic commit). 1023 */ 1024 #define DRM_MODE_PAGE_FLIP_EVENT 0x01 1025 /** 1026 * DRM_MODE_PAGE_FLIP_ASYNC 1027 * 1028 * Request that the page-flip is performed as soon as possible, ie. with no 1029 * delay due to waiting for vblank. This may cause tearing to be visible on 1030 * the screen. 1031 * 1032 * When used with atomic uAPI, the driver will return an error if the hardware 1033 * doesn't support performing an asynchronous page-flip for this update. 1034 * User-space should handle this, e.g. by falling back to a regular page-flip. 1035 * 1036 * Note, some hardware might need to perform one last synchronous page-flip 1037 * before being able to switch to asynchronous page-flips. As an exception, 1038 * the driver will return success even though that first page-flip is not 1039 * asynchronous. 1040 */ 1041 #define DRM_MODE_PAGE_FLIP_ASYNC 0x02 1042 #define DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE 0x4 1043 #define DRM_MODE_PAGE_FLIP_TARGET_RELATIVE 0x8 1044 #define DRM_MODE_PAGE_FLIP_TARGET (DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE | \ 1045 DRM_MODE_PAGE_FLIP_TARGET_RELATIVE) 1046 /** 1047 * DRM_MODE_PAGE_FLIP_FLAGS 1048 * 1049 * Bitmask of flags suitable for &drm_mode_crtc_page_flip_target.flags. 1050 */ 1051 #define DRM_MODE_PAGE_FLIP_FLAGS (DRM_MODE_PAGE_FLIP_EVENT | \ 1052 DRM_MODE_PAGE_FLIP_ASYNC | \ 1053 DRM_MODE_PAGE_FLIP_TARGET) 1054 1055 /* 1056 * Request a page flip on the specified crtc. 1057 * 1058 * This ioctl will ask KMS to schedule a page flip for the specified 1059 * crtc. Once any pending rendering targeting the specified fb (as of 1060 * ioctl time) has completed, the crtc will be reprogrammed to display 1061 * that fb after the next vertical refresh. The ioctl returns 1062 * immediately, but subsequent rendering to the current fb will block 1063 * in the execbuffer ioctl until the page flip happens. If a page 1064 * flip is already pending as the ioctl is called, EBUSY will be 1065 * returned. 1066 * 1067 * Flag DRM_MODE_PAGE_FLIP_EVENT requests that drm sends back a vblank 1068 * event (see drm.h: struct drm_event_vblank) when the page flip is 1069 * done. The user_data field passed in with this ioctl will be 1070 * returned as the user_data field in the vblank event struct. 1071 * 1072 * Flag DRM_MODE_PAGE_FLIP_ASYNC requests that the flip happen 1073 * 'as soon as possible', meaning that it not delay waiting for vblank. 1074 * This may cause tearing on the screen. 1075 * 1076 * The reserved field must be zero. 1077 */ 1078 1079 struct drm_mode_crtc_page_flip { 1080 __u32 crtc_id; 1081 __u32 fb_id; 1082 __u32 flags; 1083 __u32 reserved; 1084 __u64 user_data; 1085 }; 1086 1087 /* 1088 * Request a page flip on the specified crtc. 1089 * 1090 * Same as struct drm_mode_crtc_page_flip, but supports new flags and 1091 * re-purposes the reserved field: 1092 * 1093 * The sequence field must be zero unless either of the 1094 * DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE/RELATIVE flags is specified. When 1095 * the ABSOLUTE flag is specified, the sequence field denotes the absolute 1096 * vblank sequence when the flip should take effect. When the RELATIVE 1097 * flag is specified, the sequence field denotes the relative (to the 1098 * current one when the ioctl is called) vblank sequence when the flip 1099 * should take effect. NOTE: DRM_IOCTL_WAIT_VBLANK must still be used to 1100 * make sure the vblank sequence before the target one has passed before 1101 * calling this ioctl. The purpose of the 1102 * DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE/RELATIVE flags is merely to clarify 1103 * the target for when code dealing with a page flip runs during a 1104 * vertical blank period. 1105 */ 1106 1107 struct drm_mode_crtc_page_flip_target { 1108 __u32 crtc_id; 1109 __u32 fb_id; 1110 __u32 flags; 1111 __u32 sequence; 1112 __u64 user_data; 1113 }; 1114 1115 /** 1116 * struct drm_mode_create_dumb - Create a KMS dumb buffer for scanout. 1117 * @height: buffer height in pixels 1118 * @width: buffer width in pixels 1119 * @bpp: color mode 1120 * @flags: must be zero 1121 * @handle: buffer object handle 1122 * @pitch: number of bytes between two consecutive lines 1123 * @size: size of the whole buffer in bytes 1124 * 1125 * User-space fills @height, @width, @bpp and @flags. If the IOCTL succeeds, 1126 * the kernel fills @handle, @pitch and @size. 1127 * 1128 * The value of @bpp is a color-mode number describing a specific format 1129 * or a variant thereof. The value often corresponds to the number of bits 1130 * per pixel for most modes, although there are exceptions. Each color mode 1131 * maps to a DRM format plus a number of modes with similar pixel layout. 1132 * Framebuffer layout is always linear. 1133 * 1134 * Support for all modes and formats is optional. Even if dumb-buffer 1135 * creation with a certain color mode succeeds, it is not guaranteed that 1136 * the DRM driver supports any of the related formats. Most drivers support 1137 * a color mode of 32 with a format of DRM_FORMAT_XRGB8888 on their primary 1138 * plane. 1139 * 1140 * +------------+------------------------+------------------------+ 1141 * | Color mode | Framebuffer format | Compatible formats | 1142 * +============+========================+========================+ 1143 * | 32 | * DRM_FORMAT_XRGB8888 | * DRM_FORMAT_BGRX8888 | 1144 * | | | * DRM_FORMAT_RGBX8888 | 1145 * | | | * DRM_FORMAT_XBGR8888 | 1146 * +------------+------------------------+------------------------+ 1147 * | 24 | * DRM_FORMAT_RGB888 | * DRM_FORMAT_BGR888 | 1148 * +------------+------------------------+------------------------+ 1149 * | 16 | * DRM_FORMAT_RGB565 | * DRM_FORMAT_BGR565 | 1150 * +------------+------------------------+------------------------+ 1151 * | 15 | * DRM_FORMAT_XRGB1555 | * DRM_FORMAT_BGRX1555 | 1152 * | | | * DRM_FORMAT_RGBX1555 | 1153 * | | | * DRM_FORMAT_XBGR1555 | 1154 * +------------+------------------------+------------------------+ 1155 * | 8 | * DRM_FORMAT_C8 | * DRM_FORMAT_D8 | 1156 * | | | * DRM_FORMAT_R8 | 1157 * +------------+------------------------+------------------------+ 1158 * | 4 | * DRM_FORMAT_C4 | * DRM_FORMAT_D4 | 1159 * | | | * DRM_FORMAT_R4 | 1160 * +------------+------------------------+------------------------+ 1161 * | 2 | * DRM_FORMAT_C2 | * DRM_FORMAT_D2 | 1162 * | | | * DRM_FORMAT_R2 | 1163 * +------------+------------------------+------------------------+ 1164 * | 1 | * DRM_FORMAT_C1 | * DRM_FORMAT_D1 | 1165 * | | | * DRM_FORMAT_R1 | 1166 * +------------+------------------------+------------------------+ 1167 * 1168 * Color modes of 10, 12, 15, 30 and 64 are only supported for use by 1169 * legacy user space. Please don't use them in new code. Other modes 1170 * are not support. 1171 * 1172 * Do not attempt to allocate anything but linear framebuffer memory 1173 * with single-plane RGB data. Allocation of other framebuffer 1174 * layouts requires dedicated ioctls in the respective DRM driver. 1175 */ 1176 struct drm_mode_create_dumb { 1177 __u32 height; 1178 __u32 width; 1179 __u32 bpp; 1180 __u32 flags; 1181 1182 __u32 handle; 1183 __u32 pitch; 1184 __u64 size; 1185 }; 1186 1187 /* set up for mmap of a dumb scanout buffer */ 1188 struct drm_mode_map_dumb { 1189 /** Handle for the object being mapped. */ 1190 __u32 handle; 1191 __u32 pad; 1192 /** 1193 * Fake offset to use for subsequent mmap call 1194 * 1195 * This is a fixed-size type for 32/64 compatibility. 1196 */ 1197 __u64 offset; 1198 }; 1199 1200 struct drm_mode_destroy_dumb { 1201 __u32 handle; 1202 }; 1203 1204 /** 1205 * DRM_MODE_ATOMIC_TEST_ONLY 1206 * 1207 * Do not apply the atomic commit, instead check whether the hardware supports 1208 * this configuration. 1209 * 1210 * See &drm_mode_config_funcs.atomic_check for more details on test-only 1211 * commits. 1212 */ 1213 #define DRM_MODE_ATOMIC_TEST_ONLY 0x0100 1214 /** 1215 * DRM_MODE_ATOMIC_NONBLOCK 1216 * 1217 * Do not block while applying the atomic commit. The &DRM_IOCTL_MODE_ATOMIC 1218 * IOCTL returns immediately instead of waiting for the changes to be applied 1219 * in hardware. Note, the driver will still check that the update can be 1220 * applied before retuning. 1221 */ 1222 #define DRM_MODE_ATOMIC_NONBLOCK 0x0200 1223 /** 1224 * DRM_MODE_ATOMIC_ALLOW_MODESET 1225 * 1226 * Allow the update to result in temporary or transient visible artifacts while 1227 * the update is being applied. Applying the update may also take significantly 1228 * more time than a page flip. All visual artifacts will disappear by the time 1229 * the update is completed, as signalled through the vblank event's timestamp 1230 * (see struct drm_event_vblank). 1231 * 1232 * This flag must be set when the KMS update might cause visible artifacts. 1233 * Without this flag such KMS update will return a EINVAL error. What kind of 1234 * update may cause visible artifacts depends on the driver and the hardware. 1235 * User-space that needs to know beforehand if an update might cause visible 1236 * artifacts can use &DRM_MODE_ATOMIC_TEST_ONLY without 1237 * &DRM_MODE_ATOMIC_ALLOW_MODESET to see if it fails. 1238 * 1239 * To the best of the driver's knowledge, visual artifacts are guaranteed to 1240 * not appear when this flag is not set. Some sinks might display visual 1241 * artifacts outside of the driver's control. 1242 */ 1243 #define DRM_MODE_ATOMIC_ALLOW_MODESET 0x0400 1244 1245 /** 1246 * DRM_MODE_ATOMIC_FLAGS 1247 * 1248 * Bitfield of flags accepted by the &DRM_IOCTL_MODE_ATOMIC IOCTL in 1249 * &drm_mode_atomic.flags. 1250 */ 1251 #define DRM_MODE_ATOMIC_FLAGS (\ 1252 DRM_MODE_PAGE_FLIP_EVENT |\ 1253 DRM_MODE_PAGE_FLIP_ASYNC |\ 1254 DRM_MODE_ATOMIC_TEST_ONLY |\ 1255 DRM_MODE_ATOMIC_NONBLOCK |\ 1256 DRM_MODE_ATOMIC_ALLOW_MODESET) 1257 1258 struct drm_mode_atomic { 1259 __u32 flags; 1260 __u32 count_objs; 1261 __u64 objs_ptr; 1262 __u64 count_props_ptr; 1263 __u64 props_ptr; 1264 __u64 prop_values_ptr; 1265 __u64 reserved; 1266 __u64 user_data; 1267 }; 1268 1269 struct drm_format_modifier_blob { 1270 #define FORMAT_BLOB_CURRENT 1 1271 /* Version of this blob format */ 1272 __u32 version; 1273 1274 /* Flags */ 1275 __u32 flags; 1276 1277 /* Number of fourcc formats supported */ 1278 __u32 count_formats; 1279 1280 /* Where in this blob the formats exist (in bytes) */ 1281 __u32 formats_offset; 1282 1283 /* Number of drm_format_modifiers */ 1284 __u32 count_modifiers; 1285 1286 /* Where in this blob the modifiers exist (in bytes) */ 1287 __u32 modifiers_offset; 1288 1289 /* __u32 formats[] */ 1290 /* struct drm_format_modifier modifiers[] */ 1291 }; 1292 1293 struct drm_format_modifier { 1294 /* Bitmask of formats in get_plane format list this info applies to. The 1295 * offset allows a sliding window of which 64 formats (bits). 1296 * 1297 * Some examples: 1298 * In today's world with < 65 formats, and formats 0, and 2 are 1299 * supported 1300 * 0x0000000000000005 1301 * ^-offset = 0, formats = 5 1302 * 1303 * If the number formats grew to 128, and formats 98-102 are 1304 * supported with the modifier: 1305 * 1306 * 0x0000007c00000000 0000000000000000 1307 * ^ 1308 * |__offset = 64, formats = 0x7c00000000 1309 * 1310 */ 1311 __u64 formats; 1312 __u32 offset; 1313 __u32 pad; 1314 1315 /* The modifier that applies to the >get_plane format list bitmask. */ 1316 __u64 modifier; 1317 }; 1318 1319 /** 1320 * struct drm_mode_create_blob - Create New blob property 1321 * 1322 * Create a new 'blob' data property, copying length bytes from data pointer, 1323 * and returning new blob ID. 1324 */ 1325 struct drm_mode_create_blob { 1326 /** @data: Pointer to data to copy. */ 1327 __u64 data; 1328 /** @length: Length of data to copy. */ 1329 __u32 length; 1330 /** @blob_id: Return: new property ID. */ 1331 __u32 blob_id; 1332 }; 1333 1334 /** 1335 * struct drm_mode_destroy_blob - Destroy user blob 1336 * @blob_id: blob_id to destroy 1337 * 1338 * Destroy a user-created blob property. 1339 * 1340 * User-space can release blobs as soon as they do not need to refer to them by 1341 * their blob object ID. For instance, if you are using a MODE_ID blob in an 1342 * atomic commit and you will not make another commit re-using the same ID, you 1343 * can destroy the blob as soon as the commit has been issued, without waiting 1344 * for it to complete. 1345 */ 1346 struct drm_mode_destroy_blob { 1347 __u32 blob_id; 1348 }; 1349 1350 /** 1351 * struct drm_mode_create_lease - Create lease 1352 * 1353 * Lease mode resources, creating another drm_master. 1354 * 1355 * The @object_ids array must reference at least one CRTC, one connector and 1356 * one plane if &DRM_CLIENT_CAP_UNIVERSAL_PLANES is enabled. Alternatively, 1357 * the lease can be completely empty. 1358 */ 1359 struct drm_mode_create_lease { 1360 /** @object_ids: Pointer to array of object ids (__u32) */ 1361 __u64 object_ids; 1362 /** @object_count: Number of object ids */ 1363 __u32 object_count; 1364 /** @flags: flags for new FD (O_CLOEXEC, etc) */ 1365 __u32 flags; 1366 1367 /** @lessee_id: Return: unique identifier for lessee. */ 1368 __u32 lessee_id; 1369 /** @fd: Return: file descriptor to new drm_master file */ 1370 __u32 fd; 1371 }; 1372 1373 /** 1374 * struct drm_mode_list_lessees - List lessees 1375 * 1376 * List lesses from a drm_master. 1377 */ 1378 struct drm_mode_list_lessees { 1379 /** 1380 * @count_lessees: Number of lessees. 1381 * 1382 * On input, provides length of the array. 1383 * On output, provides total number. No 1384 * more than the input number will be written 1385 * back, so two calls can be used to get 1386 * the size and then the data. 1387 */ 1388 __u32 count_lessees; 1389 /** @pad: Padding. */ 1390 __u32 pad; 1391 1392 /** 1393 * @lessees_ptr: Pointer to lessees. 1394 * 1395 * Pointer to __u64 array of lessee ids 1396 */ 1397 __u64 lessees_ptr; 1398 }; 1399 1400 /** 1401 * struct drm_mode_get_lease - Get Lease 1402 * 1403 * Get leased objects. 1404 */ 1405 struct drm_mode_get_lease { 1406 /** 1407 * @count_objects: Number of leased objects. 1408 * 1409 * On input, provides length of the array. 1410 * On output, provides total number. No 1411 * more than the input number will be written 1412 * back, so two calls can be used to get 1413 * the size and then the data. 1414 */ 1415 __u32 count_objects; 1416 /** @pad: Padding. */ 1417 __u32 pad; 1418 1419 /** 1420 * @objects_ptr: Pointer to objects. 1421 * 1422 * Pointer to __u32 array of object ids. 1423 */ 1424 __u64 objects_ptr; 1425 }; 1426 1427 /** 1428 * struct drm_mode_revoke_lease - Revoke lease 1429 */ 1430 struct drm_mode_revoke_lease { 1431 /** @lessee_id: Unique ID of lessee */ 1432 __u32 lessee_id; 1433 }; 1434 1435 /** 1436 * struct drm_mode_rect - Two dimensional rectangle. 1437 * @x1: Horizontal starting coordinate (inclusive). 1438 * @y1: Vertical starting coordinate (inclusive). 1439 * @x2: Horizontal ending coordinate (exclusive). 1440 * @y2: Vertical ending coordinate (exclusive). 1441 * 1442 * With drm subsystem using struct drm_rect to manage rectangular area this 1443 * export it to user-space. 1444 * 1445 * Currently used by drm_mode_atomic blob property FB_DAMAGE_CLIPS. 1446 */ 1447 struct drm_mode_rect { 1448 __s32 x1; 1449 __s32 y1; 1450 __s32 x2; 1451 __s32 y2; 1452 }; 1453 1454 /** 1455 * struct drm_mode_closefb 1456 * @fb_id: Framebuffer ID. 1457 * @pad: Must be zero. 1458 */ 1459 struct drm_mode_closefb { 1460 __u32 fb_id; 1461 __u32 pad; 1462 }; 1463 1464 #if defined(__cplusplus) 1465 } 1466 #endif 1467 1468 #endif 1469