xref: /linux/include/sound/emu8000.h (revision 9e56ff53b4115875667760445b028357848b4748)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 #ifndef __SOUND_EMU8000_H
3 #define __SOUND_EMU8000_H
4 /*
5  *  Defines for the emu8000 (AWE32/64)
6  *
7  *  Copyright (C) 1999 Steve Ratcliffe
8  *  Copyright (C) 1999-2000 Takashi Iwai <tiwai@suse.de>
9  */
10 
11 #include <sound/emux_synth.h>
12 #include <sound/seq_kernel.h>
13 
14 /*
15  * Hardware parameters.
16  */
17 #define EMU8000_MAX_DRAM (28 * 1024 * 1024) /* Max on-board mem is 28Mb ???*/
18 #define EMU8000_DRAM_OFFSET 0x200000	/* Beginning of on board ram */
19 #define EMU8000_CHANNELS   32	/* Number of hardware channels */
20 #define EMU8000_DRAM_VOICES	30	/* number of normal voices */
21 
22 /* Flags to set a dma channel to read or write */
23 #define EMU8000_RAM_READ   0
24 #define EMU8000_RAM_WRITE  1
25 #define EMU8000_RAM_CLOSE  2
26 #define EMU8000_RAM_MODE_MASK	0x03
27 #define EMU8000_RAM_RIGHT	0x10	/* use 'right' DMA channel */
28 
29 enum {
30 	EMU8000_CONTROL_BASS = 0,
31 	EMU8000_CONTROL_TREBLE,
32 	EMU8000_CONTROL_CHORUS_MODE,
33 	EMU8000_CONTROL_REVERB_MODE,
34 	EMU8000_CONTROL_FM_CHORUS_DEPTH,
35 	EMU8000_CONTROL_FM_REVERB_DEPTH,
36 	EMU8000_NUM_CONTROLS,
37 };
38 
39 /*
40  * Structure to hold all state information for the emu8000 driver.
41  *
42  * Note 1: The chip supports 32 channels in hardware this is max_channels
43  * some of the channels may be used for other things so max_channels is
44  * the number in use for wave voices.
45  */
46 struct snd_emu8000 {
47 
48 	struct snd_emux *emu;
49 
50 	int index;		/* sequencer client index */
51 	int seq_ports;		/* number of sequencer ports */
52 	int fm_chorus_depth;	/* FM OPL3 chorus depth */
53 	int fm_reverb_depth;	/* FM OPL3 reverb depth */
54 
55 	int mem_size;		/* memory size */
56 	unsigned long port1;	/* Port usually base+0 */
57 	unsigned long port2;	/* Port usually at base+0x400 */
58 	unsigned long port3;	/* Port usually at base+0x800 */
59 	unsigned short last_reg;/* Last register command */
60 	spinlock_t reg_lock;
61 
62 	int dram_checked;
63 
64 	struct snd_card *card;		/* The card that this belongs to */
65 
66 	int chorus_mode;
67 	int reverb_mode;
68 	int bass_level;
69 	int treble_level;
70 
71 	struct snd_util_memhdr *memhdr;
72 
73 	spinlock_t control_lock;
74 	struct snd_kcontrol *controls[EMU8000_NUM_CONTROLS];
75 
76 	struct snd_pcm *pcm; /* pcm on emu8000 wavetable */
77 
78 };
79 
80 /* sequencer device id */
81 #define SNDRV_SEQ_DEV_ID_EMU8000	"emu8000-synth"
82 
83 
84 /* exported functions */
85 int snd_emu8000_new(struct snd_card *card, int device, long port, int seq_ports,
86 		    struct snd_seq_device **ret);
87 void snd_emu8000_poke(struct snd_emu8000 *emu, unsigned int port, unsigned int reg,
88 		      unsigned int val);
89 unsigned short snd_emu8000_peek(struct snd_emu8000 *emu, unsigned int port,
90 				unsigned int reg);
91 void snd_emu8000_poke_dw(struct snd_emu8000 *emu, unsigned int port, unsigned int reg,
92 			 unsigned int val);
93 unsigned int snd_emu8000_peek_dw(struct snd_emu8000 *emu, unsigned int port,
94 				 unsigned int reg);
95 void snd_emu8000_dma_chan(struct snd_emu8000 *emu, int ch, int mode);
96 
97 void snd_emu8000_init_fm(struct snd_emu8000 *emu);
98 
99 void snd_emu8000_update_chorus_mode(struct snd_emu8000 *emu);
100 void snd_emu8000_update_reverb_mode(struct snd_emu8000 *emu);
101 void snd_emu8000_update_equalizer(struct snd_emu8000 *emu);
102 int snd_emu8000_load_chorus_fx(struct snd_emu8000 *emu, int mode, const void __user *buf, long len);
103 int snd_emu8000_load_reverb_fx(struct snd_emu8000 *emu, int mode, const void __user *buf, long len);
104 
105 #endif /* __SOUND_EMU8000_H */
106