1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef SCSI_TRANSPORT_SAS_H 3 #define SCSI_TRANSPORT_SAS_H 4 5 #include <linux/transport_class.h> 6 #include <linux/types.h> 7 #include <linux/mutex.h> 8 #include <scsi/sas.h> 9 #include <linux/bsg-lib.h> 10 11 struct scsi_transport_template; 12 struct sas_rphy; 13 struct request; 14 15 #if !IS_ENABLED(CONFIG_SCSI_SAS_ATTRS) 16 static inline int scsi_is_sas_rphy(const struct device *sdev) 17 { 18 return 0; 19 } 20 #else 21 extern int scsi_is_sas_rphy(const struct device *); 22 #endif 23 24 static inline int sas_protocol_ata(enum sas_protocol proto) 25 { 26 return ((proto & SAS_PROTOCOL_SATA) || 27 (proto & SAS_PROTOCOL_STP))? 1 : 0; 28 } 29 30 enum sas_linkrate { 31 /* These Values are defined in the SAS standard */ 32 SAS_LINK_RATE_UNKNOWN = 0, 33 SAS_PHY_DISABLED = 1, 34 SAS_PHY_RESET_PROBLEM = 2, 35 SAS_SATA_SPINUP_HOLD = 3, 36 SAS_SATA_PORT_SELECTOR = 4, 37 SAS_PHY_RESET_IN_PROGRESS = 5, 38 SAS_LINK_RATE_1_5_GBPS = 8, 39 SAS_LINK_RATE_G1 = SAS_LINK_RATE_1_5_GBPS, 40 SAS_LINK_RATE_3_0_GBPS = 9, 41 SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS, 42 SAS_LINK_RATE_6_0_GBPS = 10, 43 SAS_LINK_RATE_12_0_GBPS = 11, 44 SAS_LINK_RATE_22_5_GBPS = 12, 45 /* These are virtual to the transport class and may never 46 * be signalled normally since the standard defined field 47 * is only 4 bits */ 48 SAS_LINK_RATE_FAILED = 0x10, 49 SAS_PHY_VIRTUAL = 0x11, 50 }; 51 52 struct sas_identify { 53 enum sas_device_type device_type; 54 enum sas_protocol initiator_port_protocols; 55 enum sas_protocol target_port_protocols; 56 u64 sas_address; 57 u8 phy_identifier; 58 }; 59 60 struct sas_phy { 61 struct device dev; 62 int number; 63 int enabled; 64 65 /* phy identification */ 66 struct sas_identify identify; 67 68 /* phy attributes */ 69 enum sas_linkrate negotiated_linkrate; 70 enum sas_linkrate minimum_linkrate_hw; 71 enum sas_linkrate minimum_linkrate; 72 enum sas_linkrate maximum_linkrate_hw; 73 enum sas_linkrate maximum_linkrate; 74 75 /* link error statistics */ 76 u32 invalid_dword_count; 77 u32 running_disparity_error_count; 78 u32 loss_of_dword_sync_count; 79 u32 phy_reset_problem_count; 80 81 /* for the list of phys belonging to a port */ 82 struct list_head port_siblings; 83 84 /* available to the lldd */ 85 void *hostdata; 86 }; 87 88 #define dev_to_phy(d) \ 89 container_of((d), struct sas_phy, dev) 90 #define transport_class_to_phy(dev) \ 91 dev_to_phy((dev)->parent) 92 #define phy_to_shost(phy) \ 93 dev_to_shost((phy)->dev.parent) 94 95 struct request_queue; 96 struct sas_rphy { 97 struct device dev; 98 struct sas_identify identify; 99 struct list_head list; 100 struct request_queue *q; 101 u32 scsi_target_id; 102 }; 103 104 #define dev_to_rphy(d) \ 105 container_of((d), struct sas_rphy, dev) 106 #define transport_class_to_rphy(dev) \ 107 dev_to_rphy((dev)->parent) 108 #define rphy_to_shost(rphy) \ 109 dev_to_shost((rphy)->dev.parent) 110 #define target_to_rphy(targ) \ 111 dev_to_rphy((targ)->dev.parent) 112 113 struct sas_end_device { 114 struct sas_rphy rphy; 115 /* flags */ 116 unsigned ready_led_meaning:1; 117 unsigned tlr_supported:1; 118 unsigned tlr_enabled:1; 119 /* parameters */ 120 u16 I_T_nexus_loss_timeout; 121 u16 initiator_response_timeout; 122 }; 123 #define rphy_to_end_device(r) \ 124 container_of((r), struct sas_end_device, rphy) 125 126 struct sas_expander_device { 127 int level; 128 int next_port_id; 129 130 #define SAS_EXPANDER_VENDOR_ID_LEN 8 131 char vendor_id[SAS_EXPANDER_VENDOR_ID_LEN+1]; 132 #define SAS_EXPANDER_PRODUCT_ID_LEN 16 133 char product_id[SAS_EXPANDER_PRODUCT_ID_LEN+1]; 134 #define SAS_EXPANDER_PRODUCT_REV_LEN 4 135 char product_rev[SAS_EXPANDER_PRODUCT_REV_LEN+1]; 136 #define SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN 8 137 char component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN+1]; 138 u16 component_id; 139 u8 component_revision_id; 140 141 struct sas_rphy rphy; 142 143 }; 144 #define rphy_to_expander_device(r) \ 145 container_of((r), struct sas_expander_device, rphy) 146 147 struct sas_port { 148 struct device dev; 149 150 int port_identifier; 151 int num_phys; 152 /* port flags */ 153 unsigned int is_backlink:1; 154 155 /* the other end of the link */ 156 struct sas_rphy *rphy; 157 158 struct mutex phy_list_mutex; 159 struct list_head phy_list; 160 struct list_head del_list; /* libsas only */ 161 }; 162 163 #define dev_to_sas_port(d) \ 164 container_of((d), struct sas_port, dev) 165 #define transport_class_to_sas_port(dev) \ 166 dev_to_sas_port((dev)->parent) 167 168 struct sas_phy_linkrates { 169 enum sas_linkrate maximum_linkrate; 170 enum sas_linkrate minimum_linkrate; 171 }; 172 173 /* The functions by which the transport class and the driver communicate */ 174 struct sas_function_template { 175 int (*get_linkerrors)(struct sas_phy *); 176 int (*get_enclosure_identifier)(struct sas_rphy *, u64 *); 177 int (*get_bay_identifier)(struct sas_rphy *); 178 int (*phy_reset)(struct sas_phy *, int); 179 int (*phy_enable)(struct sas_phy *, int); 180 int (*phy_setup)(struct sas_phy *); 181 void (*phy_release)(struct sas_phy *); 182 int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *); 183 void (*smp_handler)(struct bsg_job *, struct Scsi_Host *, 184 struct sas_rphy *); 185 }; 186 187 188 void sas_remove_children(struct device *); 189 extern void sas_remove_host(struct Scsi_Host *); 190 191 extern struct sas_phy *sas_phy_alloc(struct device *, int); 192 extern void sas_phy_free(struct sas_phy *); 193 extern int sas_phy_add(struct sas_phy *); 194 extern void sas_phy_delete(struct sas_phy *); 195 extern int scsi_is_sas_phy(const struct device *); 196 197 u64 sas_get_address(struct scsi_device *); 198 unsigned int sas_tlr_supported(struct scsi_device *); 199 unsigned int sas_is_tlr_enabled(struct scsi_device *); 200 void sas_disable_tlr(struct scsi_device *); 201 void sas_enable_tlr(struct scsi_device *); 202 203 extern struct sas_rphy *sas_end_device_alloc(struct sas_port *); 204 extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type); 205 void sas_rphy_free(struct sas_rphy *); 206 extern int sas_rphy_add(struct sas_rphy *); 207 extern void sas_rphy_remove(struct sas_rphy *); 208 extern void sas_rphy_delete(struct sas_rphy *); 209 extern void sas_rphy_unlink(struct sas_rphy *); 210 211 struct sas_port *sas_port_alloc(struct device *, int); 212 struct sas_port *sas_port_alloc_num(struct device *); 213 int sas_port_add(struct sas_port *); 214 void sas_port_free(struct sas_port *); 215 void sas_port_delete(struct sas_port *); 216 void sas_port_add_phy(struct sas_port *, struct sas_phy *); 217 void sas_port_delete_phy(struct sas_port *, struct sas_phy *); 218 void sas_port_mark_backlink(struct sas_port *); 219 int scsi_is_sas_port(const struct device *); 220 struct sas_phy *sas_port_get_phy(struct sas_port *port); 221 static inline void sas_port_put_phy(struct sas_phy *phy) 222 { 223 if (phy) 224 put_device(&phy->dev); 225 } 226 227 extern struct scsi_transport_template * 228 sas_attach_transport(struct sas_function_template *); 229 extern void sas_release_transport(struct scsi_transport_template *); 230 int sas_read_port_mode_page(struct scsi_device *); 231 232 static inline int 233 scsi_is_sas_expander_device(struct device *dev) 234 { 235 struct sas_rphy *rphy; 236 if (!scsi_is_sas_rphy(dev)) 237 return 0; 238 rphy = dev_to_rphy(dev); 239 return rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE || 240 rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE; 241 } 242 243 #define scsi_is_sas_phy_local(phy) scsi_is_host_device((phy)->dev.parent) 244 245 #endif /* SCSI_TRANSPORT_SAS_H */ 246