xref: /linux/include/scsi/scsi_device.h (revision ef815d2cba782e96b9aad9483523d474ed41c62a)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _SCSI_SCSI_DEVICE_H
3 #define _SCSI_SCSI_DEVICE_H
4 
5 #include <linux/list.h>
6 #include <linux/spinlock.h>
7 #include <linux/workqueue.h>
8 #include <linux/blk-mq.h>
9 #include <scsi/scsi.h>
10 #include <linux/atomic.h>
11 #include <linux/sbitmap.h>
12 
13 struct bsg_device;
14 struct device;
15 struct request_queue;
16 struct scsi_cmnd;
17 struct scsi_lun;
18 struct scsi_sense_hdr;
19 
20 typedef __u64 __bitwise blist_flags_t;
21 
22 #define SCSI_SENSE_BUFFERSIZE	96
23 
24 struct scsi_mode_data {
25 	__u32	length;
26 	__u16	block_descriptor_length;
27 	__u8	medium_type;
28 	__u8	device_specific;
29 	__u8	header_length;
30 	__u8	longlba:1;
31 };
32 
33 /*
34  * sdev state: If you alter this, you also need to alter scsi_sysfs.c
35  * (for the ascii descriptions) and the state model enforcer:
36  * scsi_lib:scsi_device_set_state().
37  */
38 enum scsi_device_state {
39 	SDEV_CREATED = 1,	/* device created but not added to sysfs
40 				 * Only internal commands allowed (for inq) */
41 	SDEV_RUNNING,		/* device properly configured
42 				 * All commands allowed */
43 	SDEV_CANCEL,		/* beginning to delete device
44 				 * Only error handler commands allowed */
45 	SDEV_DEL,		/* device deleted
46 				 * no commands allowed */
47 	SDEV_QUIESCE,		/* Device quiescent.  No block commands
48 				 * will be accepted, only specials (which
49 				 * originate in the mid-layer) */
50 	SDEV_OFFLINE,		/* Device offlined (by error handling or
51 				 * user request */
52 	SDEV_TRANSPORT_OFFLINE,	/* Offlined by transport class error handler */
53 	SDEV_BLOCK,		/* Device blocked by scsi lld.  No
54 				 * scsi commands from user or midlayer
55 				 * should be issued to the scsi
56 				 * lld. */
57 	SDEV_CREATED_BLOCK,	/* same as above but for created devices */
58 };
59 
60 enum scsi_scan_mode {
61 	SCSI_SCAN_INITIAL = 0,
62 	SCSI_SCAN_RESCAN,
63 	SCSI_SCAN_MANUAL,
64 };
65 
66 enum scsi_device_event {
67 	SDEV_EVT_MEDIA_CHANGE	= 1,	/* media has changed */
68 	SDEV_EVT_INQUIRY_CHANGE_REPORTED,		/* 3F 03  UA reported */
69 	SDEV_EVT_CAPACITY_CHANGE_REPORTED,		/* 2A 09  UA reported */
70 	SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED,	/* 38 07  UA reported */
71 	SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED,	/* 2A 01  UA reported */
72 	SDEV_EVT_LUN_CHANGE_REPORTED,			/* 3F 0E  UA reported */
73 	SDEV_EVT_ALUA_STATE_CHANGE_REPORTED,		/* 2A 06  UA reported */
74 	SDEV_EVT_POWER_ON_RESET_OCCURRED,		/* 29 00  UA reported */
75 
76 	SDEV_EVT_FIRST		= SDEV_EVT_MEDIA_CHANGE,
77 	SDEV_EVT_LAST		= SDEV_EVT_POWER_ON_RESET_OCCURRED,
78 
79 	SDEV_EVT_MAXBITS	= SDEV_EVT_LAST + 1
80 };
81 
82 struct scsi_event {
83 	enum scsi_device_event	evt_type;
84 	struct list_head	node;
85 
86 	/* put union of data structures, for non-simple event types,
87 	 * here
88 	 */
89 };
90 
91 /**
92  * struct scsi_vpd - SCSI Vital Product Data
93  * @rcu: For kfree_rcu().
94  * @len: Length in bytes of @data.
95  * @data: VPD data as defined in various T10 SCSI standard documents.
96  */
97 struct scsi_vpd {
98 	struct rcu_head	rcu;
99 	int		len;
100 	unsigned char	data[];
101 };
102 
103 enum scsi_vpd_parameters {
104 	SCSI_VPD_HEADER_SIZE = 4,
105 };
106 
107 struct scsi_device {
108 	struct Scsi_Host *host;
109 	struct request_queue *request_queue;
110 
111 	/* the next two are protected by the host->host_lock */
112 	struct list_head    siblings;   /* list of all devices on this host */
113 	struct list_head    same_target_siblings; /* just the devices sharing same target id */
114 
115 	struct sbitmap budget_map;
116 	atomic_t device_blocked;	/* Device returned QUEUE_FULL. */
117 
118 	atomic_t restarts;
119 	spinlock_t list_lock;
120 	struct list_head starved_entry;
121 	unsigned short queue_depth;	/* How deep of a queue we want */
122 	unsigned short max_queue_depth;	/* max queue depth */
123 	unsigned short last_queue_full_depth; /* These two are used by */
124 	unsigned short last_queue_full_count; /* scsi_track_queue_full() */
125 	unsigned long last_queue_full_time;	/* last queue full time */
126 	unsigned long queue_ramp_up_period;	/* ramp up period in jiffies */
127 #define SCSI_DEFAULT_RAMP_UP_PERIOD	(120 * HZ)
128 
129 	unsigned long last_queue_ramp_up;	/* last queue ramp up time */
130 
131 	unsigned int id, channel;
132 	u64 lun;
133 	unsigned int manufacturer;	/* Manufacturer of device, for using
134 					 * vendor-specific cmd's */
135 	unsigned sector_size;	/* size in bytes */
136 
137 	void *hostdata;		/* available to low-level driver */
138 	unsigned char type;
139 	char scsi_level;
140 	char inq_periph_qual;	/* PQ from INQUIRY data */
141 	struct mutex inquiry_mutex;
142 	unsigned char inquiry_len;	/* valid bytes in 'inquiry' */
143 	unsigned char * inquiry;	/* INQUIRY response data */
144 	const char * vendor;		/* [back_compat] point into 'inquiry' ... */
145 	const char * model;		/* ... after scan; point to static string */
146 	const char * rev;		/* ... "nullnullnullnull" before scan */
147 
148 #define SCSI_DEFAULT_VPD_LEN	255	/* default SCSI VPD page size (max) */
149 	struct scsi_vpd __rcu *vpd_pg0;
150 	struct scsi_vpd __rcu *vpd_pg83;
151 	struct scsi_vpd __rcu *vpd_pg80;
152 	struct scsi_vpd __rcu *vpd_pg89;
153 	struct scsi_vpd __rcu *vpd_pgb0;
154 	struct scsi_vpd __rcu *vpd_pgb1;
155 	struct scsi_vpd __rcu *vpd_pgb2;
156 
157 	struct scsi_target      *sdev_target;
158 
159 	blist_flags_t		sdev_bflags; /* black/white flags as also found in
160 				 * scsi_devinfo.[hc]. For now used only to
161 				 * pass settings from slave_alloc to scsi
162 				 * core. */
163 	unsigned int eh_timeout; /* Error handling timeout */
164 	unsigned removable:1;
165 	unsigned changed:1;	/* Data invalid due to media change */
166 	unsigned busy:1;	/* Used to prevent races */
167 	unsigned lockable:1;	/* Able to prevent media removal */
168 	unsigned locked:1;      /* Media removal disabled */
169 	unsigned borken:1;	/* Tell the Seagate driver to be
170 				 * painfully slow on this device */
171 	unsigned disconnect:1;	/* can disconnect */
172 	unsigned soft_reset:1;	/* Uses soft reset option */
173 	unsigned sdtr:1;	/* Device supports SDTR messages */
174 	unsigned wdtr:1;	/* Device supports WDTR messages */
175 	unsigned ppr:1;		/* Device supports PPR messages */
176 	unsigned tagged_supported:1;	/* Supports SCSI-II tagged queuing */
177 	unsigned simple_tags:1;	/* simple queue tag messages are enabled */
178 	unsigned was_reset:1;	/* There was a bus reset on the bus for
179 				 * this device */
180 	unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
181 				     * because we did a bus reset. */
182 	unsigned use_10_for_rw:1; /* first try 10-byte read / write */
183 	unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
184 	unsigned set_dbd_for_ms:1; /* Set "DBD" field in mode sense */
185 	unsigned no_report_opcodes:1;	/* no REPORT SUPPORTED OPERATION CODES */
186 	unsigned no_write_same:1;	/* no WRITE SAME command */
187 	unsigned use_16_for_rw:1; /* Use read/write(16) over read/write(10) */
188 	unsigned use_16_for_sync:1;	/* Use sync (16) over sync (10) */
189 	unsigned skip_ms_page_8:1;	/* do not use MODE SENSE page 0x08 */
190 	unsigned skip_ms_page_3f:1;	/* do not use MODE SENSE page 0x3f */
191 	unsigned skip_vpd_pages:1;	/* do not read VPD pages */
192 	unsigned try_vpd_pages:1;	/* attempt to read VPD pages */
193 	unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
194 	unsigned no_start_on_add:1;	/* do not issue start on add */
195 	unsigned allow_restart:1; /* issue START_UNIT in error handler */
196 	unsigned manage_start_stop:1;	/* Let HLD (sd) manage start/stop */
197 	unsigned start_stop_pwr_cond:1;	/* Set power cond. in START_STOP_UNIT */
198 	unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
199 	unsigned select_no_atn:1;
200 	unsigned fix_capacity:1;	/* READ_CAPACITY is too high by 1 */
201 	unsigned guess_capacity:1;	/* READ_CAPACITY might be too high by 1 */
202 	unsigned retry_hwerror:1;	/* Retry HARDWARE_ERROR */
203 	unsigned last_sector_bug:1;	/* do not use multisector accesses on
204 					   SD_LAST_BUGGY_SECTORS */
205 	unsigned no_read_disc_info:1;	/* Avoid READ_DISC_INFO cmds */
206 	unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
207 	unsigned try_rc_10_first:1;	/* Try READ_CAPACACITY_10 first */
208 	unsigned security_supported:1;	/* Supports Security Protocols */
209 	unsigned is_visible:1;	/* is the device visible in sysfs */
210 	unsigned wce_default_on:1;	/* Cache is ON by default */
211 	unsigned no_dif:1;	/* T10 PI (DIF) should be disabled */
212 	unsigned broken_fua:1;		/* Don't set FUA bit */
213 	unsigned lun_in_cdb:1;		/* Store LUN bits in CDB[1] */
214 	unsigned unmap_limit_for_ws:1;	/* Use the UNMAP limit for WRITE SAME */
215 	unsigned rpm_autosuspend:1;	/* Enable runtime autosuspend at device
216 					 * creation time */
217 	unsigned ignore_media_change:1; /* Ignore MEDIA CHANGE on resume */
218 	unsigned silence_suspend:1;	/* Do not print runtime PM related messages */
219 	unsigned no_vpd_size:1;		/* No VPD size reported in header */
220 
221 	unsigned cdl_supported:1;	/* Command duration limits supported */
222 	unsigned cdl_enable:1;		/* Enable/disable Command duration limits */
223 
224 	unsigned int queue_stopped;	/* request queue is quiesced */
225 	bool offline_already;		/* Device offline message logged */
226 
227 	atomic_t disk_events_disable_depth; /* disable depth for disk events */
228 
229 	DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
230 	DECLARE_BITMAP(pending_events, SDEV_EVT_MAXBITS); /* pending events */
231 	struct list_head event_list;	/* asserted events */
232 	struct work_struct event_work;
233 
234 	unsigned int max_device_blocked; /* what device_blocked counts down from  */
235 #define SCSI_DEFAULT_DEVICE_BLOCKED	3
236 
237 	atomic_t iorequest_cnt;
238 	atomic_t iodone_cnt;
239 	atomic_t ioerr_cnt;
240 	atomic_t iotmo_cnt;
241 
242 	struct device		sdev_gendev,
243 				sdev_dev;
244 
245 	struct work_struct	requeue_work;
246 
247 	struct scsi_device_handler *handler;
248 	void			*handler_data;
249 
250 	size_t			dma_drain_len;
251 	void			*dma_drain_buf;
252 
253 	unsigned int		sg_timeout;
254 	unsigned int		sg_reserved_size;
255 
256 	struct bsg_device	*bsg_dev;
257 	unsigned char		access_state;
258 	struct mutex		state_mutex;
259 	enum scsi_device_state sdev_state;
260 	struct task_struct	*quiesced_by;
261 	unsigned long		sdev_data[];
262 } __attribute__((aligned(sizeof(unsigned long))));
263 
264 #define	to_scsi_device(d)	\
265 	container_of(d, struct scsi_device, sdev_gendev)
266 #define	class_to_sdev(d)	\
267 	container_of(d, struct scsi_device, sdev_dev)
268 #define transport_class_to_sdev(class_dev) \
269 	to_scsi_device(class_dev->parent)
270 
271 #define sdev_dbg(sdev, fmt, a...) \
272 	dev_dbg(&(sdev)->sdev_gendev, fmt, ##a)
273 
274 /*
275  * like scmd_printk, but the device name is passed in
276  * as a string pointer
277  */
278 __printf(4, 5) void
279 sdev_prefix_printk(const char *, const struct scsi_device *, const char *,
280 		const char *, ...);
281 
282 #define sdev_printk(l, sdev, fmt, a...)				\
283 	sdev_prefix_printk(l, sdev, NULL, fmt, ##a)
284 
285 __printf(3, 4) void
286 scmd_printk(const char *, const struct scsi_cmnd *, const char *, ...);
287 
288 #define scmd_dbg(scmd, fmt, a...)					\
289 	do {								\
290 		struct request *__rq = scsi_cmd_to_rq((scmd));		\
291 									\
292 		if (__rq->q->disk)					\
293 			sdev_dbg((scmd)->device, "[%s] " fmt,		\
294 				 __rq->q->disk->disk_name, ##a);	\
295 		else							\
296 			sdev_dbg((scmd)->device, fmt, ##a);		\
297 	} while (0)
298 
299 enum scsi_target_state {
300 	STARGET_CREATED = 1,
301 	STARGET_RUNNING,
302 	STARGET_REMOVE,
303 	STARGET_CREATED_REMOVE,
304 	STARGET_DEL,
305 };
306 
307 /*
308  * scsi_target: representation of a scsi target, for now, this is only
309  * used for single_lun devices. If no one has active IO to the target,
310  * starget_sdev_user is NULL, else it points to the active sdev.
311  */
312 struct scsi_target {
313 	struct scsi_device	*starget_sdev_user;
314 	struct list_head	siblings;
315 	struct list_head	devices;
316 	struct device		dev;
317 	struct kref		reap_ref; /* last put renders target invisible */
318 	unsigned int		channel;
319 	unsigned int		id; /* target id ... replace
320 				     * scsi_device.id eventually */
321 	unsigned int		create:1; /* signal that it needs to be added */
322 	unsigned int		single_lun:1;	/* Indicates we should only
323 						 * allow I/O to one of the luns
324 						 * for the device at a time. */
325 	unsigned int		pdt_1f_for_no_lun:1;	/* PDT = 0x1f
326 						 * means no lun present. */
327 	unsigned int		no_report_luns:1;	/* Don't use
328 						 * REPORT LUNS for scanning. */
329 	unsigned int		expecting_lun_change:1;	/* A device has reported
330 						 * a 3F/0E UA, other devices on
331 						 * the same target will also. */
332 	/* commands actually active on LLD. */
333 	atomic_t		target_busy;
334 	atomic_t		target_blocked;
335 
336 	/*
337 	 * LLDs should set this in the slave_alloc host template callout.
338 	 * If set to zero then there is not limit.
339 	 */
340 	unsigned int		can_queue;
341 	unsigned int		max_target_blocked;
342 #define SCSI_DEFAULT_TARGET_BLOCKED	3
343 
344 	char			scsi_level;
345 	enum scsi_target_state	state;
346 	void 			*hostdata; /* available to low-level driver */
347 	unsigned long		starget_data[]; /* for the transport */
348 	/* starget_data must be the last element!!!! */
349 } __attribute__((aligned(sizeof(unsigned long))));
350 
351 #define to_scsi_target(d)	container_of(d, struct scsi_target, dev)
352 static inline struct scsi_target *scsi_target(struct scsi_device *sdev)
353 {
354 	return to_scsi_target(sdev->sdev_gendev.parent);
355 }
356 #define transport_class_to_starget(class_dev) \
357 	to_scsi_target(class_dev->parent)
358 
359 #define starget_printk(prefix, starget, fmt, a...)	\
360 	dev_printk(prefix, &(starget)->dev, fmt, ##a)
361 
362 extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
363 		uint, uint, u64, void *hostdata);
364 extern int scsi_add_device(struct Scsi_Host *host, uint channel,
365 			   uint target, u64 lun);
366 extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh);
367 extern void scsi_remove_device(struct scsi_device *);
368 extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh);
369 void scsi_attach_vpd(struct scsi_device *sdev);
370 void scsi_cdl_check(struct scsi_device *sdev);
371 int scsi_cdl_enable(struct scsi_device *sdev, bool enable);
372 
373 extern struct scsi_device *scsi_device_from_queue(struct request_queue *q);
374 extern int __must_check scsi_device_get(struct scsi_device *);
375 extern void scsi_device_put(struct scsi_device *);
376 extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *,
377 					      uint, uint, u64);
378 extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *,
379 						uint, uint, u64);
380 extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *,
381 							u64);
382 extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *,
383 							  u64);
384 extern void starget_for_each_device(struct scsi_target *, void *,
385 		     void (*fn)(struct scsi_device *, void *));
386 extern void __starget_for_each_device(struct scsi_target *, void *,
387 				      void (*fn)(struct scsi_device *,
388 						 void *));
389 
390 /* only exposed to implement shost_for_each_device */
391 extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
392 						  struct scsi_device *);
393 
394 /**
395  * shost_for_each_device - iterate over all devices of a host
396  * @sdev: the &struct scsi_device to use as a cursor
397  * @shost: the &struct scsi_host to iterate over
398  *
399  * Iterator that returns each device attached to @shost.  This loop
400  * takes a reference on each device and releases it at the end.  If
401  * you break out of the loop, you must call scsi_device_put(sdev).
402  */
403 #define shost_for_each_device(sdev, shost) \
404 	for ((sdev) = __scsi_iterate_devices((shost), NULL); \
405 	     (sdev); \
406 	     (sdev) = __scsi_iterate_devices((shost), (sdev)))
407 
408 /**
409  * __shost_for_each_device - iterate over all devices of a host (UNLOCKED)
410  * @sdev: the &struct scsi_device to use as a cursor
411  * @shost: the &struct scsi_host to iterate over
412  *
413  * Iterator that returns each device attached to @shost.  It does _not_
414  * take a reference on the scsi_device, so the whole loop must be
415  * protected by shost->host_lock.
416  *
417  * Note: The only reason to use this is because you need to access the
418  * device list in interrupt context.  Otherwise you really want to use
419  * shost_for_each_device instead.
420  */
421 #define __shost_for_each_device(sdev, shost) \
422 	list_for_each_entry((sdev), &((shost)->__devices), siblings)
423 
424 extern int scsi_change_queue_depth(struct scsi_device *, int);
425 extern int scsi_track_queue_full(struct scsi_device *, int);
426 
427 extern int scsi_set_medium_removal(struct scsi_device *, char);
428 
429 int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
430 		    int subpage, unsigned char *buffer, int len, int timeout,
431 		    int retries, struct scsi_mode_data *data,
432 		    struct scsi_sense_hdr *);
433 extern int scsi_mode_select(struct scsi_device *sdev, int pf, int sp,
434 			    unsigned char *buffer, int len, int timeout,
435 			    int retries, struct scsi_mode_data *data,
436 			    struct scsi_sense_hdr *);
437 extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout,
438 				int retries, struct scsi_sense_hdr *sshdr);
439 extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf,
440 			     int buf_len);
441 int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
442 		       unsigned int len, unsigned char opcode,
443 		       unsigned short sa);
444 extern int scsi_device_set_state(struct scsi_device *sdev,
445 				 enum scsi_device_state state);
446 extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
447 					  gfp_t gfpflags);
448 extern void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt);
449 extern void sdev_evt_send_simple(struct scsi_device *sdev,
450 			  enum scsi_device_event evt_type, gfp_t gfpflags);
451 extern int scsi_device_quiesce(struct scsi_device *sdev);
452 extern void scsi_device_resume(struct scsi_device *sdev);
453 extern void scsi_target_quiesce(struct scsi_target *);
454 extern void scsi_target_resume(struct scsi_target *);
455 extern void scsi_scan_target(struct device *parent, unsigned int channel,
456 			     unsigned int id, u64 lun,
457 			     enum scsi_scan_mode rescan);
458 extern void scsi_target_reap(struct scsi_target *);
459 void scsi_block_targets(struct Scsi_Host *shost, struct device *dev);
460 extern void scsi_target_unblock(struct device *, enum scsi_device_state);
461 extern void scsi_remove_target(struct device *);
462 extern const char *scsi_device_state_name(enum scsi_device_state);
463 extern int scsi_is_sdev_device(const struct device *);
464 extern int scsi_is_target_device(const struct device *);
465 extern void scsi_sanitize_inquiry_string(unsigned char *s, int len);
466 
467 /* Optional arguments to scsi_execute_cmd */
468 struct scsi_exec_args {
469 	unsigned char *sense;		/* sense buffer */
470 	unsigned int sense_len;		/* sense buffer len */
471 	struct scsi_sense_hdr *sshdr;	/* decoded sense header */
472 	blk_mq_req_flags_t req_flags;	/* BLK_MQ_REQ flags */
473 	int scmd_flags;			/* SCMD flags */
474 	int *resid;			/* residual length */
475 };
476 
477 int scsi_execute_cmd(struct scsi_device *sdev, const unsigned char *cmd,
478 		     blk_opf_t opf, void *buffer, unsigned int bufflen,
479 		     int timeout, int retries,
480 		     const struct scsi_exec_args *args);
481 
482 extern void sdev_disable_disk_events(struct scsi_device *sdev);
483 extern void sdev_enable_disk_events(struct scsi_device *sdev);
484 extern int scsi_vpd_lun_id(struct scsi_device *, char *, size_t);
485 extern int scsi_vpd_tpg_id(struct scsi_device *, int *);
486 
487 #ifdef CONFIG_PM
488 extern int scsi_autopm_get_device(struct scsi_device *);
489 extern void scsi_autopm_put_device(struct scsi_device *);
490 #else
491 static inline int scsi_autopm_get_device(struct scsi_device *d) { return 0; }
492 static inline void scsi_autopm_put_device(struct scsi_device *d) {}
493 #endif /* CONFIG_PM */
494 
495 static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev)
496 {
497 	return device_reprobe(&sdev->sdev_gendev);
498 }
499 
500 static inline unsigned int sdev_channel(struct scsi_device *sdev)
501 {
502 	return sdev->channel;
503 }
504 
505 static inline unsigned int sdev_id(struct scsi_device *sdev)
506 {
507 	return sdev->id;
508 }
509 
510 #define scmd_id(scmd) sdev_id((scmd)->device)
511 #define scmd_channel(scmd) sdev_channel((scmd)->device)
512 
513 /*
514  * checks for positions of the SCSI state machine
515  */
516 static inline int scsi_device_online(struct scsi_device *sdev)
517 {
518 	return (sdev->sdev_state != SDEV_OFFLINE &&
519 		sdev->sdev_state != SDEV_TRANSPORT_OFFLINE &&
520 		sdev->sdev_state != SDEV_DEL);
521 }
522 static inline int scsi_device_blocked(struct scsi_device *sdev)
523 {
524 	return sdev->sdev_state == SDEV_BLOCK ||
525 		sdev->sdev_state == SDEV_CREATED_BLOCK;
526 }
527 static inline int scsi_device_created(struct scsi_device *sdev)
528 {
529 	return sdev->sdev_state == SDEV_CREATED ||
530 		sdev->sdev_state == SDEV_CREATED_BLOCK;
531 }
532 
533 int scsi_internal_device_block_nowait(struct scsi_device *sdev);
534 int scsi_internal_device_unblock_nowait(struct scsi_device *sdev,
535 					enum scsi_device_state new_state);
536 
537 /* accessor functions for the SCSI parameters */
538 static inline int scsi_device_sync(struct scsi_device *sdev)
539 {
540 	return sdev->sdtr;
541 }
542 static inline int scsi_device_wide(struct scsi_device *sdev)
543 {
544 	return sdev->wdtr;
545 }
546 static inline int scsi_device_dt(struct scsi_device *sdev)
547 {
548 	return sdev->ppr;
549 }
550 static inline int scsi_device_dt_only(struct scsi_device *sdev)
551 {
552 	if (sdev->inquiry_len < 57)
553 		return 0;
554 	return (sdev->inquiry[56] & 0x0c) == 0x04;
555 }
556 static inline int scsi_device_ius(struct scsi_device *sdev)
557 {
558 	if (sdev->inquiry_len < 57)
559 		return 0;
560 	return sdev->inquiry[56] & 0x01;
561 }
562 static inline int scsi_device_qas(struct scsi_device *sdev)
563 {
564 	if (sdev->inquiry_len < 57)
565 		return 0;
566 	return sdev->inquiry[56] & 0x02;
567 }
568 static inline int scsi_device_enclosure(struct scsi_device *sdev)
569 {
570 	return sdev->inquiry ? (sdev->inquiry[6] & (1<<6)) : 1;
571 }
572 
573 static inline int scsi_device_protection(struct scsi_device *sdev)
574 {
575 	if (sdev->no_dif)
576 		return 0;
577 
578 	return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
579 }
580 
581 static inline int scsi_device_tpgs(struct scsi_device *sdev)
582 {
583 	return sdev->inquiry ? (sdev->inquiry[5] >> 4) & 0x3 : 0;
584 }
585 
586 /**
587  * scsi_device_supports_vpd - test if a device supports VPD pages
588  * @sdev: the &struct scsi_device to test
589  *
590  * If the 'try_vpd_pages' flag is set it takes precedence.
591  * Otherwise we will assume VPD pages are supported if the
592  * SCSI level is at least SPC-3 and 'skip_vpd_pages' is not set.
593  */
594 static inline int scsi_device_supports_vpd(struct scsi_device *sdev)
595 {
596 	/* Attempt VPD inquiry if the device blacklist explicitly calls
597 	 * for it.
598 	 */
599 	if (sdev->try_vpd_pages)
600 		return 1;
601 	/*
602 	 * Although VPD inquiries can go to SCSI-2 type devices,
603 	 * some USB ones crash on receiving them, and the pages
604 	 * we currently ask for are mandatory for SPC-2 and beyond
605 	 */
606 	if (sdev->scsi_level >= SCSI_SPC_2 && !sdev->skip_vpd_pages)
607 		return 1;
608 	return 0;
609 }
610 
611 static inline int scsi_device_busy(struct scsi_device *sdev)
612 {
613 	return sbitmap_weight(&sdev->budget_map);
614 }
615 
616 #define MODULE_ALIAS_SCSI_DEVICE(type) \
617 	MODULE_ALIAS("scsi:t-" __stringify(type) "*")
618 #define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
619 
620 #endif /* _SCSI_SCSI_DEVICE_H */
621