1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * This header file contains public constants and structures used by 4 * the SCSI initiator code. 5 */ 6 #ifndef _SCSI_SCSI_H 7 #define _SCSI_SCSI_H 8 9 #include <linux/types.h> 10 #include <linux/scatterlist.h> 11 #include <linux/kernel.h> 12 #include <scsi/scsi_common.h> 13 #include <scsi/scsi_proto.h> 14 15 struct scsi_cmnd; 16 17 enum scsi_timeouts { 18 SCSI_DEFAULT_EH_TIMEOUT = 10 * HZ, 19 }; 20 21 /* 22 * DIX-capable adapters effectively support infinite chaining for the 23 * protection information scatterlist 24 */ 25 #define SCSI_MAX_PROT_SG_SEGMENTS 0xFFFF 26 27 /* 28 * Special value for scanning to specify scanning or rescanning of all 29 * possible channels, (target) ids, or luns on a given shost. 30 */ 31 #define SCAN_WILD_CARD ~0 32 33 /** scsi_status_is_good - check the status return. 34 * 35 * @status: the status passed up from the driver (including host and 36 * driver components) 37 * 38 * This returns true for known good conditions that may be treated as 39 * command completed normally 40 */ 41 static inline int scsi_status_is_good(int status) 42 { 43 /* 44 * FIXME: bit0 is listed as reserved in SCSI-2, but is 45 * significant in SCSI-3. For now, we follow the SCSI-2 46 * behaviour and ignore reserved bits. 47 */ 48 status &= 0xfe; 49 return ((status == SAM_STAT_GOOD) || 50 (status == SAM_STAT_CONDITION_MET) || 51 /* Next two "intermediate" statuses are obsolete in SAM-4 */ 52 (status == SAM_STAT_INTERMEDIATE) || 53 (status == SAM_STAT_INTERMEDIATE_CONDITION_MET) || 54 /* FIXME: this is obsolete in SAM-3 */ 55 (status == SAM_STAT_COMMAND_TERMINATED)); 56 } 57 58 59 /* 60 * standard mode-select header prepended to all mode-select commands 61 */ 62 63 struct ccs_modesel_head { 64 __u8 _r1; /* reserved */ 65 __u8 medium; /* device-specific medium type */ 66 __u8 _r2; /* reserved */ 67 __u8 block_desc_length; /* block descriptor length */ 68 __u8 density; /* device-specific density code */ 69 __u8 number_blocks_hi; /* number of blocks in this block desc */ 70 __u8 number_blocks_med; 71 __u8 number_blocks_lo; 72 __u8 _r3; 73 __u8 block_length_hi; /* block length for blocks in this desc */ 74 __u8 block_length_med; 75 __u8 block_length_lo; 76 }; 77 78 /* 79 * The Well Known LUNS (SAM-3) in our int representation of a LUN 80 */ 81 #define SCSI_W_LUN_BASE 0xc100 82 #define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1) 83 #define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2) 84 #define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3) 85 86 static inline int scsi_is_wlun(u64 lun) 87 { 88 return (lun & 0xff00) == SCSI_W_LUN_BASE; 89 } 90 91 92 /* 93 * MESSAGE CODES 94 */ 95 96 #define COMMAND_COMPLETE 0x00 97 #define EXTENDED_MESSAGE 0x01 98 #define EXTENDED_MODIFY_DATA_POINTER 0x00 99 #define EXTENDED_SDTR 0x01 100 #define EXTENDED_EXTENDED_IDENTIFY 0x02 /* SCSI-I only */ 101 #define EXTENDED_WDTR 0x03 102 #define EXTENDED_PPR 0x04 103 #define EXTENDED_MODIFY_BIDI_DATA_PTR 0x05 104 #define SAVE_POINTERS 0x02 105 #define RESTORE_POINTERS 0x03 106 #define DISCONNECT 0x04 107 #define INITIATOR_ERROR 0x05 108 #define ABORT_TASK_SET 0x06 109 #define MESSAGE_REJECT 0x07 110 #define NOP 0x08 111 #define MSG_PARITY_ERROR 0x09 112 #define LINKED_CMD_COMPLETE 0x0a 113 #define LINKED_FLG_CMD_COMPLETE 0x0b 114 #define TARGET_RESET 0x0c 115 #define ABORT_TASK 0x0d 116 #define CLEAR_TASK_SET 0x0e 117 #define INITIATE_RECOVERY 0x0f /* SCSI-II only */ 118 #define RELEASE_RECOVERY 0x10 /* SCSI-II only */ 119 #define TERMINATE_IO_PROC 0x11 /* SCSI-II only */ 120 #define CLEAR_ACA 0x16 121 #define LOGICAL_UNIT_RESET 0x17 122 #define SIMPLE_QUEUE_TAG 0x20 123 #define HEAD_OF_QUEUE_TAG 0x21 124 #define ORDERED_QUEUE_TAG 0x22 125 #define IGNORE_WIDE_RESIDUE 0x23 126 #define ACA 0x24 127 #define QAS_REQUEST 0x55 128 129 /* Old SCSI2 names, don't use in new code */ 130 #define BUS_DEVICE_RESET TARGET_RESET 131 #define ABORT ABORT_TASK_SET 132 133 /* 134 * Host byte codes 135 */ 136 137 #define DID_OK 0x00 /* NO error */ 138 #define DID_NO_CONNECT 0x01 /* Couldn't connect before timeout period */ 139 #define DID_BUS_BUSY 0x02 /* BUS stayed busy through time out period */ 140 #define DID_TIME_OUT 0x03 /* TIMED OUT for other reason */ 141 #define DID_BAD_TARGET 0x04 /* BAD target. */ 142 #define DID_ABORT 0x05 /* Told to abort for some other reason */ 143 #define DID_PARITY 0x06 /* Parity error */ 144 #define DID_ERROR 0x07 /* Internal error */ 145 #define DID_RESET 0x08 /* Reset by somebody. */ 146 #define DID_BAD_INTR 0x09 /* Got an interrupt we weren't expecting. */ 147 #define DID_PASSTHROUGH 0x0a /* Force command past mid-layer */ 148 #define DID_SOFT_ERROR 0x0b /* The low level driver just wish a retry */ 149 #define DID_IMM_RETRY 0x0c /* Retry without decrementing retry count */ 150 #define DID_REQUEUE 0x0d /* Requeue command (no immediate retry) also 151 * without decrementing the retry count */ 152 #define DID_TRANSPORT_DISRUPTED 0x0e /* Transport error disrupted execution 153 * and the driver blocked the port to 154 * recover the link. Transport class will 155 * retry or fail IO */ 156 #define DID_TRANSPORT_FAILFAST 0x0f /* Transport class fastfailed the io */ 157 #define DID_TARGET_FAILURE 0x10 /* Permanent target failure, do not retry on 158 * other paths */ 159 #define DID_NEXUS_FAILURE 0x11 /* Permanent nexus failure, retry on other 160 * paths might yield different results */ 161 #define DID_ALLOC_FAILURE 0x12 /* Space allocation on the device failed */ 162 #define DID_MEDIUM_ERROR 0x13 /* Medium error */ 163 #define DID_TRANSPORT_MARGINAL 0x14 /* Transport marginal errors */ 164 #define DRIVER_OK 0x00 /* Driver status */ 165 166 /* 167 * These indicate the error that occurred, and what is available. 168 */ 169 170 #define DRIVER_BUSY 0x01 171 #define DRIVER_SOFT 0x02 172 #define DRIVER_MEDIA 0x03 173 #define DRIVER_ERROR 0x04 174 175 #define DRIVER_INVALID 0x05 176 #define DRIVER_TIMEOUT 0x06 177 #define DRIVER_HARD 0x07 178 #define DRIVER_SENSE 0x08 179 180 /* 181 * Internal return values. 182 */ 183 enum scsi_disposition { 184 NEEDS_RETRY = 0x2001, 185 SUCCESS = 0x2002, 186 FAILED = 0x2003, 187 QUEUED = 0x2004, 188 SOFT_ERROR = 0x2005, 189 ADD_TO_MLQUEUE = 0x2006, 190 TIMEOUT_ERROR = 0x2007, 191 SCSI_RETURN_NOT_HANDLED = 0x2008, 192 FAST_IO_FAIL = 0x2009, 193 }; 194 195 /* 196 * Midlevel queue return values. 197 */ 198 #define SCSI_MLQUEUE_HOST_BUSY 0x1055 199 #define SCSI_MLQUEUE_DEVICE_BUSY 0x1056 200 #define SCSI_MLQUEUE_EH_RETRY 0x1057 201 #define SCSI_MLQUEUE_TARGET_BUSY 0x1058 202 203 /* 204 * Use these to separate status msg and our bytes 205 * 206 * These are set by: 207 * 208 * status byte = set from target device 209 * msg_byte = return status from host adapter itself. 210 * host_byte = set by low-level driver to indicate status. 211 * driver_byte = set by mid-level. 212 */ 213 #define status_byte(result) (((result) >> 1) & 0x7f) 214 #define msg_byte(result) (((result) >> 8) & 0xff) 215 #define host_byte(result) (((result) >> 16) & 0xff) 216 #define driver_byte(result) (((result) >> 24) & 0xff) 217 218 #define sense_class(sense) (((sense) >> 4) & 0x7) 219 #define sense_error(sense) ((sense) & 0xf) 220 #define sense_valid(sense) ((sense) & 0x80) 221 222 /* 223 * default timeouts 224 */ 225 #define FORMAT_UNIT_TIMEOUT (2 * 60 * 60 * HZ) 226 #define START_STOP_TIMEOUT (60 * HZ) 227 #define MOVE_MEDIUM_TIMEOUT (5 * 60 * HZ) 228 #define READ_ELEMENT_STATUS_TIMEOUT (5 * 60 * HZ) 229 #define READ_DEFECT_DATA_TIMEOUT (60 * HZ ) 230 231 232 #define IDENTIFY_BASE 0x80 233 #define IDENTIFY(can_disconnect, lun) (IDENTIFY_BASE |\ 234 ((can_disconnect) ? 0x40 : 0) |\ 235 ((lun) & 0x07)) 236 237 /* 238 * struct scsi_device::scsi_level values. For SCSI devices other than those 239 * prior to SCSI-2 (i.e. over 12 years old) this value is (resp[2] + 1) 240 * where "resp" is a byte array of the response to an INQUIRY. The scsi_level 241 * variable is visible to the user via sysfs. 242 */ 243 244 #define SCSI_UNKNOWN 0 245 #define SCSI_1 1 246 #define SCSI_1_CCS 2 247 #define SCSI_2 3 248 #define SCSI_3 4 /* SPC */ 249 #define SCSI_SPC_2 5 250 #define SCSI_SPC_3 6 251 252 /* 253 * INQ PERIPHERAL QUALIFIERS 254 */ 255 #define SCSI_INQ_PQ_CON 0x00 256 #define SCSI_INQ_PQ_NOT_CON 0x01 257 #define SCSI_INQ_PQ_NOT_CAP 0x03 258 259 260 /* 261 * Here are some scsi specific ioctl commands which are sometimes useful. 262 * 263 * Note that include/linux/cdrom.h also defines IOCTL 0x5300 - 0x5395 264 */ 265 266 /* Used to obtain PUN and LUN info. Conflicts with CDROMAUDIOBUFSIZ */ 267 #define SCSI_IOCTL_GET_IDLUN 0x5382 268 269 /* 0x5383 and 0x5384 were used for SCSI_IOCTL_TAGGED_{ENABLE,DISABLE} */ 270 271 /* Used to obtain the host number of a device. */ 272 #define SCSI_IOCTL_PROBE_HOST 0x5385 273 274 /* Used to obtain the bus number for a device */ 275 #define SCSI_IOCTL_GET_BUS_NUMBER 0x5386 276 277 /* Used to obtain the PCI location of a device */ 278 #define SCSI_IOCTL_GET_PCI 0x5387 279 280 #endif /* _SCSI_SCSI_H */ 281