1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * This header file contains public constants and structures used by 4 * the SCSI initiator code. 5 */ 6 #ifndef _SCSI_SCSI_H 7 #define _SCSI_SCSI_H 8 9 #include <linux/types.h> 10 11 #include <asm/param.h> 12 13 #include <scsi/scsi_common.h> 14 #include <scsi/scsi_proto.h> 15 #include <scsi/scsi_status.h> 16 17 struct scsi_cmnd; 18 19 enum scsi_timeouts { 20 SCSI_DEFAULT_EH_TIMEOUT = 10 * HZ, 21 }; 22 23 /* 24 * DIX-capable adapters effectively support infinite chaining for the 25 * protection information scatterlist 26 */ 27 #define SCSI_MAX_PROT_SG_SEGMENTS 0xFFFF 28 29 /* 30 * Special value for scanning to specify scanning or rescanning of all 31 * possible channels, (target) ids, or luns on a given shost. 32 */ 33 #define SCAN_WILD_CARD ~0 34 35 /* 36 * standard mode-select header prepended to all mode-select commands 37 */ 38 39 struct ccs_modesel_head { 40 __u8 _r1; /* reserved */ 41 __u8 medium; /* device-specific medium type */ 42 __u8 _r2; /* reserved */ 43 __u8 block_desc_length; /* block descriptor length */ 44 __u8 density; /* device-specific density code */ 45 __u8 number_blocks_hi; /* number of blocks in this block desc */ 46 __u8 number_blocks_med; 47 __u8 number_blocks_lo; 48 __u8 _r3; 49 __u8 block_length_hi; /* block length for blocks in this desc */ 50 __u8 block_length_med; 51 __u8 block_length_lo; 52 }; 53 54 /* 55 * The Well Known LUNS (SAM-3) in our int representation of a LUN 56 */ 57 #define SCSI_W_LUN_BASE 0xc100 58 #define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1) 59 #define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2) 60 #define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3) 61 62 static inline int scsi_is_wlun(u64 lun) 63 { 64 return (lun & 0xff00) == SCSI_W_LUN_BASE; 65 } 66 67 /** 68 * scsi_status_is_check_condition - check the status return. 69 * 70 * @status: the status passed up from the driver (including host and 71 * driver components) 72 * 73 * Returns: %true if the status code is SAM_STAT_CHECK_CONDITION. 74 */ 75 static inline int scsi_status_is_check_condition(int status) 76 { 77 if (status < 0) 78 return false; 79 status &= 0xfe; 80 return status == SAM_STAT_CHECK_CONDITION; 81 } 82 83 /* 84 * Extended message codes. 85 */ 86 #define EXTENDED_MODIFY_DATA_POINTER 0x00 87 #define EXTENDED_SDTR 0x01 88 #define EXTENDED_EXTENDED_IDENTIFY 0x02 /* SCSI-I only */ 89 #define EXTENDED_WDTR 0x03 90 #define EXTENDED_PPR 0x04 91 #define EXTENDED_MODIFY_BIDI_DATA_PTR 0x05 92 93 /* 94 * Internal return values. 95 */ 96 enum scsi_disposition { 97 NEEDS_RETRY = 0x2001, 98 SUCCESS = 0x2002, 99 FAILED = 0x2003, 100 QUEUED = 0x2004, 101 SOFT_ERROR = 0x2005, 102 ADD_TO_MLQUEUE = 0x2006, 103 TIMEOUT_ERROR = 0x2007, 104 SCSI_RETURN_NOT_HANDLED = 0x2008, 105 FAST_IO_FAIL = 0x2009, 106 }; 107 108 /* 109 * Midlevel queue return values. 110 */ 111 #define SCSI_MLQUEUE_HOST_BUSY 0x1055 112 #define SCSI_MLQUEUE_DEVICE_BUSY 0x1056 113 #define SCSI_MLQUEUE_EH_RETRY 0x1057 114 #define SCSI_MLQUEUE_TARGET_BUSY 0x1058 115 116 /* 117 * Use these to separate status msg and our bytes 118 * 119 * These are set by: 120 * 121 * status byte = set from target device 122 * msg_byte (unused) 123 * host_byte = set by low-level driver to indicate status. 124 */ 125 #define status_byte(result) (result & 0xff) 126 #define host_byte(result) (((result) >> 16) & 0xff) 127 128 #define sense_class(sense) (((sense) >> 4) & 0x7) 129 #define sense_error(sense) ((sense) & 0xf) 130 #define sense_valid(sense) ((sense) & 0x80) 131 132 /* 133 * default timeouts 134 */ 135 #define FORMAT_UNIT_TIMEOUT (2 * 60 * 60 * HZ) 136 #define START_STOP_TIMEOUT (60 * HZ) 137 #define MOVE_MEDIUM_TIMEOUT (5 * 60 * HZ) 138 #define READ_ELEMENT_STATUS_TIMEOUT (5 * 60 * HZ) 139 #define READ_DEFECT_DATA_TIMEOUT (60 * HZ ) 140 141 142 #define IDENTIFY_BASE 0x80 143 #define IDENTIFY(can_disconnect, lun) (IDENTIFY_BASE |\ 144 ((can_disconnect) ? 0x40 : 0) |\ 145 ((lun) & 0x07)) 146 147 /* 148 * struct scsi_device::scsi_level values. For SCSI devices other than those 149 * prior to SCSI-2 (i.e. over 12 years old) this value is (resp[2] + 1) 150 * where "resp" is a byte array of the response to an INQUIRY. The scsi_level 151 * variable is visible to the user via sysfs. 152 */ 153 154 #define SCSI_UNKNOWN 0 155 #define SCSI_1 1 156 #define SCSI_1_CCS 2 157 #define SCSI_2 3 158 #define SCSI_3 4 /* SPC */ 159 #define SCSI_SPC_2 5 160 #define SCSI_SPC_3 6 161 #define SCSI_SPC_4 7 162 #define SCSI_SPC_5 8 163 #define SCSI_SPC_6 14 164 165 /* 166 * INQ PERIPHERAL QUALIFIERS 167 */ 168 #define SCSI_INQ_PQ_CON 0x00 169 #define SCSI_INQ_PQ_NOT_CON 0x01 170 #define SCSI_INQ_PQ_NOT_CAP 0x03 171 172 173 /* 174 * Here are some scsi specific ioctl commands which are sometimes useful. 175 * 176 * Note that include/linux/cdrom.h also defines IOCTL 0x5300 - 0x5395 177 */ 178 179 /* Used to obtain PUN and LUN info. Conflicts with CDROMAUDIOBUFSIZ */ 180 #define SCSI_IOCTL_GET_IDLUN 0x5382 181 182 /* 0x5383 and 0x5384 were used for SCSI_IOCTL_TAGGED_{ENABLE,DISABLE} */ 183 184 /* Used to obtain the host number of a device. */ 185 #define SCSI_IOCTL_PROBE_HOST 0x5385 186 187 /* Used to obtain the bus number for a device */ 188 #define SCSI_IOCTL_GET_BUS_NUMBER 0x5386 189 190 /* Used to obtain the PCI location of a device */ 191 #define SCSI_IOCTL_GET_PCI 0x5387 192 193 /** 194 * scsi_status_is_good - check the status return. 195 * 196 * @status: the status passed up from the driver (including host and 197 * driver components) 198 * 199 * Returns: %true for known good conditions that may be treated as 200 * command completed normally 201 */ 202 static inline bool scsi_status_is_good(int status) 203 { 204 if (status < 0) 205 return false; 206 207 if (host_byte(status) == DID_NO_CONNECT) 208 return false; 209 210 /* 211 * FIXME: bit0 is listed as reserved in SCSI-2, but is 212 * significant in SCSI-3. For now, we follow the SCSI-2 213 * behaviour and ignore reserved bits. 214 */ 215 status &= 0xfe; 216 return ((status == SAM_STAT_GOOD) || 217 (status == SAM_STAT_CONDITION_MET) || 218 /* Next two "intermediate" statuses are obsolete in SAM-4 */ 219 (status == SAM_STAT_INTERMEDIATE) || 220 (status == SAM_STAT_INTERMEDIATE_CONDITION_MET) || 221 /* FIXME: this is obsolete in SAM-3 */ 222 (status == SAM_STAT_COMMAND_TERMINATED)); 223 } 224 225 #endif /* _SCSI_SCSI_H */ 226