1 #ifndef __NET_REGULATORY_H 2 #define __NET_REGULATORY_H 3 /* 4 * regulatory support structures 5 * 6 * Copyright 2008-2009 Luis R. Rodriguez <mcgrof@qca.qualcomm.com> 7 * 8 * Permission to use, copy, modify, and/or distribute this software for any 9 * purpose with or without fee is hereby granted, provided that the above 10 * copyright notice and this permission notice appear in all copies. 11 * 12 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 13 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 14 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 15 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 16 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 17 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 18 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 19 */ 20 21 #include <linux/rcupdate.h> 22 23 /** 24 * enum environment_cap - Environment parsed from country IE 25 * @ENVIRON_ANY: indicates country IE applies to both indoor and 26 * outdoor operation. 27 * @ENVIRON_INDOOR: indicates country IE applies only to indoor operation 28 * @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation 29 */ 30 enum environment_cap { 31 ENVIRON_ANY, 32 ENVIRON_INDOOR, 33 ENVIRON_OUTDOOR, 34 }; 35 36 /** 37 * struct regulatory_request - used to keep track of regulatory requests 38 * 39 * @rcu_head: RCU head struct used to free the request 40 * @wiphy_idx: this is set if this request's initiator is 41 * %REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This 42 * can be used by the wireless core to deal with conflicts 43 * and potentially inform users of which devices specifically 44 * cased the conflicts. 45 * @initiator: indicates who sent this request, could be any of 46 * of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*) 47 * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested 48 * regulatory domain. We have a few special codes: 49 * 00 - World regulatory domain 50 * 99 - built by driver but a specific alpha2 cannot be determined 51 * 98 - result of an intersection between two regulatory domains 52 * 97 - regulatory domain has not yet been configured 53 * @dfs_region: If CRDA responded with a regulatory domain that requires 54 * DFS master operation on a known DFS region (NL80211_DFS_*), 55 * dfs_region represents that region. Drivers can use this and the 56 * @alpha2 to adjust their device's DFS parameters as required. 57 * @user_reg_hint_type: if the @initiator was of type 58 * %NL80211_REGDOM_SET_BY_USER, this classifies the type 59 * of hint passed. This could be any of the %NL80211_USER_REG_HINT_* 60 * types. 61 * @intersect: indicates whether the wireless core should intersect 62 * the requested regulatory domain with the presently set regulatory 63 * domain. 64 * @processed: indicates whether or not this requests has already been 65 * processed. When the last request is processed it means that the 66 * currently regulatory domain set on cfg80211 is updated from 67 * CRDA and can be used by other regulatory requests. When a 68 * the last request is not yet processed we must yield until it 69 * is processed before processing any new requests. 70 * @country_ie_checksum: checksum of the last processed and accepted 71 * country IE 72 * @country_ie_env: lets us know if the AP is telling us we are outdoor, 73 * indoor, or if it doesn't matter 74 * @list: used to insert into the reg_requests_list linked list 75 */ 76 struct regulatory_request { 77 struct rcu_head rcu_head; 78 int wiphy_idx; 79 enum nl80211_reg_initiator initiator; 80 enum nl80211_user_reg_hint_type user_reg_hint_type; 81 char alpha2[2]; 82 enum nl80211_dfs_regions dfs_region; 83 bool intersect; 84 bool processed; 85 enum environment_cap country_ie_env; 86 struct list_head list; 87 }; 88 89 /** 90 * enum ieee80211_regulatory_flags - device regulatory flags 91 * 92 * @REGULATORY_CUSTOM_REG: tells us the driver for this device 93 * has its own custom regulatory domain and cannot identify the 94 * ISO / IEC 3166 alpha2 it belongs to. When this is enabled 95 * we will disregard the first regulatory hint (when the 96 * initiator is %REGDOM_SET_BY_CORE). Drivers that use 97 * wiphy_apply_custom_regulatory() should have this flag set 98 * or the regulatory core will set it for the wiphy. 99 * If you use regulatory_hint() *after* using 100 * wiphy_apply_custom_regulatory() the wireless core will 101 * clear the REGULATORY_CUSTOM_REG for your wiphy as it would be 102 * implied that the device somehow gained knowledge of its region. 103 * @REGULATORY_STRICT_REG: tells us that the wiphy for this device 104 * has regulatory domain that it wishes to be considered as the 105 * superset for regulatory rules. After this device gets its regulatory 106 * domain programmed further regulatory hints shall only be considered 107 * for this device to enhance regulatory compliance, forcing the 108 * device to only possibly use subsets of the original regulatory 109 * rules. For example if channel 13 and 14 are disabled by this 110 * device's regulatory domain no user specified regulatory hint which 111 * has these channels enabled would enable them for this wiphy, 112 * the device's original regulatory domain will be trusted as the 113 * base. You can program the superset of regulatory rules for this 114 * wiphy with regulatory_hint() for cards programmed with an 115 * ISO3166-alpha2 country code. wiphys that use regulatory_hint() 116 * will have their wiphy->regd programmed once the regulatory 117 * domain is set, and all other regulatory hints will be ignored 118 * until their own regulatory domain gets programmed. 119 * @REGULATORY_DISABLE_BEACON_HINTS: enable this if your driver needs to 120 * ensure that passive scan flags and beaconing flags may not be lifted by 121 * cfg80211 due to regulatory beacon hints. For more information on beacon 122 * hints read the documenation for regulatory_hint_found_beacon() 123 * @REGULATORY_COUNTRY_IE_FOLLOW_POWER: for devices that have a preference 124 * that even though they may have programmed their own custom power 125 * setting prior to wiphy registration, they want to ensure their channel 126 * power settings are updated for this connection with the power settings 127 * derived from the regulatory domain. The regulatory domain used will be 128 * based on the ISO3166-alpha2 from country IE provided through 129 * regulatory_hint_country_ie() 130 * @REGULATORY_COUNTRY_IE_IGNORE: for devices that have a preference to ignore 131 * all country IE information processed by the regulatory core. This will 132 * override %REGULATORY_COUNTRY_IE_FOLLOW_POWER as all country IEs will 133 * be ignored. 134 * @REGULATORY_ENABLE_RELAX_NO_IR: for devices that wish to allow the 135 * NO_IR relaxation, which enables transmissions on channels on which 136 * otherwise initiating radiation is not allowed. This will enable the 137 * relaxations enabled under the CFG80211_REG_RELAX_NO_IR configuration 138 * option 139 */ 140 enum ieee80211_regulatory_flags { 141 REGULATORY_CUSTOM_REG = BIT(0), 142 REGULATORY_STRICT_REG = BIT(1), 143 REGULATORY_DISABLE_BEACON_HINTS = BIT(2), 144 REGULATORY_COUNTRY_IE_FOLLOW_POWER = BIT(3), 145 REGULATORY_COUNTRY_IE_IGNORE = BIT(4), 146 REGULATORY_ENABLE_RELAX_NO_IR = BIT(5), 147 }; 148 149 struct ieee80211_freq_range { 150 u32 start_freq_khz; 151 u32 end_freq_khz; 152 u32 max_bandwidth_khz; 153 }; 154 155 struct ieee80211_power_rule { 156 u32 max_antenna_gain; 157 u32 max_eirp; 158 }; 159 160 struct ieee80211_reg_rule { 161 struct ieee80211_freq_range freq_range; 162 struct ieee80211_power_rule power_rule; 163 u32 flags; 164 u32 dfs_cac_ms; 165 }; 166 167 struct ieee80211_regdomain { 168 struct rcu_head rcu_head; 169 u32 n_reg_rules; 170 char alpha2[3]; 171 enum nl80211_dfs_regions dfs_region; 172 struct ieee80211_reg_rule reg_rules[]; 173 }; 174 175 #define MHZ_TO_KHZ(freq) ((freq) * 1000) 176 #define KHZ_TO_MHZ(freq) ((freq) / 1000) 177 #define DBI_TO_MBI(gain) ((gain) * 100) 178 #define MBI_TO_DBI(gain) ((gain) / 100) 179 #define DBM_TO_MBM(gain) ((gain) * 100) 180 #define MBM_TO_DBM(gain) ((gain) / 100) 181 182 #define REG_RULE_EXT(start, end, bw, gain, eirp, dfs_cac, reg_flags) \ 183 { \ 184 .freq_range.start_freq_khz = MHZ_TO_KHZ(start), \ 185 .freq_range.end_freq_khz = MHZ_TO_KHZ(end), \ 186 .freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw), \ 187 .power_rule.max_antenna_gain = DBI_TO_MBI(gain), \ 188 .power_rule.max_eirp = DBM_TO_MBM(eirp), \ 189 .flags = reg_flags, \ 190 .dfs_cac_ms = dfs_cac, \ 191 } 192 193 #define REG_RULE(start, end, bw, gain, eirp, reg_flags) \ 194 REG_RULE_EXT(start, end, bw, gain, eirp, 0, reg_flags) 195 196 #endif 197