1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef _LINUX_NET_QUEUES_H 3 #define _LINUX_NET_QUEUES_H 4 5 #include <linux/netdevice.h> 6 7 /* See the netdev.yaml spec for definition of each statistic */ 8 struct netdev_queue_stats_rx { 9 u64 bytes; 10 u64 packets; 11 u64 alloc_fail; 12 13 u64 hw_drops; 14 u64 hw_drop_overruns; 15 16 u64 csum_unnecessary; 17 u64 csum_none; 18 u64 csum_bad; 19 20 u64 hw_gro_packets; 21 u64 hw_gro_bytes; 22 u64 hw_gro_wire_packets; 23 u64 hw_gro_wire_bytes; 24 25 u64 hw_drop_ratelimits; 26 }; 27 28 struct netdev_queue_stats_tx { 29 u64 bytes; 30 u64 packets; 31 32 u64 hw_drops; 33 u64 hw_drop_errors; 34 35 u64 csum_none; 36 u64 needs_csum; 37 38 u64 hw_gso_packets; 39 u64 hw_gso_bytes; 40 u64 hw_gso_wire_packets; 41 u64 hw_gso_wire_bytes; 42 43 u64 hw_drop_ratelimits; 44 45 u64 stop; 46 u64 wake; 47 }; 48 49 /** 50 * struct netdev_stat_ops - netdev ops for fine grained stats 51 * @get_queue_stats_rx: get stats for a given Rx queue 52 * @get_queue_stats_tx: get stats for a given Tx queue 53 * @get_base_stats: get base stats (not belonging to any live instance) 54 * 55 * Query stats for a given object. The values of the statistics are undefined 56 * on entry (specifically they are *not* zero-initialized). Drivers should 57 * assign values only to the statistics they collect. Statistics which are not 58 * collected must be left undefined. 59 * 60 * Queue objects are not necessarily persistent, and only currently active 61 * queues are queried by the per-queue callbacks. This means that per-queue 62 * statistics will not generally add up to the total number of events for 63 * the device. The @get_base_stats callback allows filling in the delta 64 * between events for currently live queues and overall device history. 65 * @get_base_stats can also be used to report any miscellaneous packets 66 * transferred outside of the main set of queues used by the networking stack. 67 * When the statistics for the entire device are queried, first @get_base_stats 68 * is issued to collect the delta, and then a series of per-queue callbacks. 69 * Only statistics which are set in @get_base_stats will be reported 70 * at the device level, meaning that unlike in queue callbacks, setting 71 * a statistic to zero in @get_base_stats is a legitimate thing to do. 72 * This is because @get_base_stats has a second function of designating which 73 * statistics are in fact correct for the entire device (e.g. when history 74 * for some of the events is not maintained, and reliable "total" cannot 75 * be provided). 76 * 77 * Device drivers can assume that when collecting total device stats, 78 * the @get_base_stats and subsequent per-queue calls are performed 79 * "atomically" (without releasing the rtnl_lock). 80 * 81 * Device drivers are encouraged to reset the per-queue statistics when 82 * number of queues change. This is because the primary use case for 83 * per-queue statistics is currently to detect traffic imbalance. 84 */ 85 struct netdev_stat_ops { 86 void (*get_queue_stats_rx)(struct net_device *dev, int idx, 87 struct netdev_queue_stats_rx *stats); 88 void (*get_queue_stats_tx)(struct net_device *dev, int idx, 89 struct netdev_queue_stats_tx *stats); 90 void (*get_base_stats)(struct net_device *dev, 91 struct netdev_queue_stats_rx *rx, 92 struct netdev_queue_stats_tx *tx); 93 }; 94 95 /** 96 * struct netdev_queue_mgmt_ops - netdev ops for queue management 97 * 98 * @ndo_queue_mem_size: Size of the struct that describes a queue's memory. 99 * 100 * @ndo_queue_mem_alloc: Allocate memory for an RX queue at the specified index. 101 * The new memory is written at the specified address. 102 * 103 * @ndo_queue_mem_free: Free memory from an RX queue. 104 * 105 * @ndo_queue_start: Start an RX queue with the specified memory and at the 106 * specified index. 107 * 108 * @ndo_queue_stop: Stop the RX queue at the specified index. The stopped 109 * queue's memory is written at the specified address. 110 */ 111 struct netdev_queue_mgmt_ops { 112 size_t ndo_queue_mem_size; 113 int (*ndo_queue_mem_alloc)(struct net_device *dev, 114 void *per_queue_mem, 115 int idx); 116 void (*ndo_queue_mem_free)(struct net_device *dev, 117 void *per_queue_mem); 118 int (*ndo_queue_start)(struct net_device *dev, 119 void *per_queue_mem, 120 int idx); 121 int (*ndo_queue_stop)(struct net_device *dev, 122 void *per_queue_mem, 123 int idx); 124 }; 125 126 /** 127 * DOC: Lockless queue stopping / waking helpers. 128 * 129 * The netif_txq_maybe_stop() and __netif_txq_completed_wake() 130 * macros are designed to safely implement stopping 131 * and waking netdev queues without full lock protection. 132 * 133 * We assume that there can be no concurrent stop attempts and no concurrent 134 * wake attempts. The try-stop should happen from the xmit handler, 135 * while wake up should be triggered from NAPI poll context. 136 * The two may run concurrently (single producer, single consumer). 137 * 138 * The try-stop side is expected to run from the xmit handler and therefore 139 * it does not reschedule Tx (netif_tx_start_queue() instead of 140 * netif_tx_wake_queue()). Uses of the ``stop`` macros outside of the xmit 141 * handler may lead to xmit queue being enabled but not run. 142 * The waking side does not have similar context restrictions. 143 * 144 * The macros guarantee that rings will not remain stopped if there's 145 * space available, but they do *not* prevent false wake ups when 146 * the ring is full! Drivers should check for ring full at the start 147 * for the xmit handler. 148 * 149 * All descriptor ring indexes (and other relevant shared state) must 150 * be updated before invoking the macros. 151 */ 152 153 #define netif_txq_try_stop(txq, get_desc, start_thrs) \ 154 ({ \ 155 int _res; \ 156 \ 157 netif_tx_stop_queue(txq); \ 158 /* Producer index and stop bit must be visible \ 159 * to consumer before we recheck. \ 160 * Pairs with a barrier in __netif_txq_completed_wake(). \ 161 */ \ 162 smp_mb__after_atomic(); \ 163 \ 164 /* We need to check again in a case another \ 165 * CPU has just made room available. \ 166 */ \ 167 _res = 0; \ 168 if (unlikely(get_desc >= start_thrs)) { \ 169 netif_tx_start_queue(txq); \ 170 _res = -1; \ 171 } \ 172 _res; \ 173 }) \ 174 175 /** 176 * netif_txq_maybe_stop() - locklessly stop a Tx queue, if needed 177 * @txq: struct netdev_queue to stop/start 178 * @get_desc: get current number of free descriptors (see requirements below!) 179 * @stop_thrs: minimal number of available descriptors for queue to be left 180 * enabled 181 * @start_thrs: minimal number of descriptors to re-enable the queue, can be 182 * equal to @stop_thrs or higher to avoid frequent waking 183 * 184 * All arguments may be evaluated multiple times, beware of side effects. 185 * @get_desc must be a formula or a function call, it must always 186 * return up-to-date information when evaluated! 187 * Expected to be used from ndo_start_xmit, see the comment on top of the file. 188 * 189 * Returns: 190 * 0 if the queue was stopped 191 * 1 if the queue was left enabled 192 * -1 if the queue was re-enabled (raced with waking) 193 */ 194 #define netif_txq_maybe_stop(txq, get_desc, stop_thrs, start_thrs) \ 195 ({ \ 196 int _res; \ 197 \ 198 _res = 1; \ 199 if (unlikely(get_desc < stop_thrs)) \ 200 _res = netif_txq_try_stop(txq, get_desc, start_thrs); \ 201 _res; \ 202 }) \ 203 204 /* Variant of netdev_tx_completed_queue() which guarantees smp_mb() if 205 * @bytes != 0, regardless of kernel config. 206 */ 207 static inline void 208 netdev_txq_completed_mb(struct netdev_queue *dev_queue, 209 unsigned int pkts, unsigned int bytes) 210 { 211 if (IS_ENABLED(CONFIG_BQL)) 212 netdev_tx_completed_queue(dev_queue, pkts, bytes); 213 else if (bytes) 214 smp_mb(); 215 } 216 217 /** 218 * __netif_txq_completed_wake() - locklessly wake a Tx queue, if needed 219 * @txq: struct netdev_queue to stop/start 220 * @pkts: number of packets completed 221 * @bytes: number of bytes completed 222 * @get_desc: get current number of free descriptors (see requirements below!) 223 * @start_thrs: minimal number of descriptors to re-enable the queue 224 * @down_cond: down condition, predicate indicating that the queue should 225 * not be woken up even if descriptors are available 226 * 227 * All arguments may be evaluated multiple times. 228 * @get_desc must be a formula or a function call, it must always 229 * return up-to-date information when evaluated! 230 * Reports completed pkts/bytes to BQL. 231 * 232 * Returns: 233 * 0 if the queue was woken up 234 * 1 if the queue was already enabled (or disabled but @down_cond is true) 235 * -1 if the queue was left unchanged (@start_thrs not reached) 236 */ 237 #define __netif_txq_completed_wake(txq, pkts, bytes, \ 238 get_desc, start_thrs, down_cond) \ 239 ({ \ 240 int _res; \ 241 \ 242 /* Report to BQL and piggy back on its barrier. \ 243 * Barrier makes sure that anybody stopping the queue \ 244 * after this point sees the new consumer index. \ 245 * Pairs with barrier in netif_txq_try_stop(). \ 246 */ \ 247 netdev_txq_completed_mb(txq, pkts, bytes); \ 248 \ 249 _res = -1; \ 250 if (pkts && likely(get_desc >= start_thrs)) { \ 251 _res = 1; \ 252 if (unlikely(netif_tx_queue_stopped(txq)) && \ 253 !(down_cond)) { \ 254 netif_tx_wake_queue(txq); \ 255 _res = 0; \ 256 } \ 257 } \ 258 _res; \ 259 }) 260 261 #define netif_txq_completed_wake(txq, pkts, bytes, get_desc, start_thrs) \ 262 __netif_txq_completed_wake(txq, pkts, bytes, get_desc, start_thrs, false) 263 264 /* subqueue variants follow */ 265 266 #define netif_subqueue_try_stop(dev, idx, get_desc, start_thrs) \ 267 ({ \ 268 struct netdev_queue *txq; \ 269 \ 270 txq = netdev_get_tx_queue(dev, idx); \ 271 netif_txq_try_stop(txq, get_desc, start_thrs); \ 272 }) 273 274 #define netif_subqueue_maybe_stop(dev, idx, get_desc, stop_thrs, start_thrs) \ 275 ({ \ 276 struct netdev_queue *txq; \ 277 \ 278 txq = netdev_get_tx_queue(dev, idx); \ 279 netif_txq_maybe_stop(txq, get_desc, stop_thrs, start_thrs); \ 280 }) 281 282 #define netif_subqueue_completed_wake(dev, idx, pkts, bytes, \ 283 get_desc, start_thrs) \ 284 ({ \ 285 struct netdev_queue *txq; \ 286 \ 287 txq = netdev_get_tx_queue(dev, idx); \ 288 netif_txq_completed_wake(txq, pkts, bytes, \ 289 get_desc, start_thrs); \ 290 }) 291 292 #endif 293