xref: /linux/include/media/v4l2-mediabus.h (revision 48dea9a700c8728cc31a1dd44588b97578de86ee)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * Media Bus API header
4  *
5  * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
6  */
7 
8 #ifndef V4L2_MEDIABUS_H
9 #define V4L2_MEDIABUS_H
10 
11 #include <linux/v4l2-mediabus.h>
12 #include <linux/bitops.h>
13 
14 /* Parallel flags */
15 /*
16  * Can the client run in master or in slave mode. By "Master mode" an operation
17  * mode is meant, when the client (e.g., a camera sensor) is producing
18  * horizontal and vertical synchronisation. In "Slave mode" the host is
19  * providing these signals to the slave.
20  */
21 #define V4L2_MBUS_MASTER			BIT(0)
22 #define V4L2_MBUS_SLAVE				BIT(1)
23 /*
24  * Signal polarity flags
25  * Note: in BT.656 mode HSYNC, FIELD, and VSYNC are unused
26  * V4L2_MBUS_[HV]SYNC* flags should be also used for specifying
27  * configuration of hardware that uses [HV]REF signals
28  */
29 #define V4L2_MBUS_HSYNC_ACTIVE_HIGH		BIT(2)
30 #define V4L2_MBUS_HSYNC_ACTIVE_LOW		BIT(3)
31 #define V4L2_MBUS_VSYNC_ACTIVE_HIGH		BIT(4)
32 #define V4L2_MBUS_VSYNC_ACTIVE_LOW		BIT(5)
33 #define V4L2_MBUS_PCLK_SAMPLE_RISING		BIT(6)
34 #define V4L2_MBUS_PCLK_SAMPLE_FALLING		BIT(7)
35 #define V4L2_MBUS_DATA_ACTIVE_HIGH		BIT(8)
36 #define V4L2_MBUS_DATA_ACTIVE_LOW		BIT(9)
37 /* FIELD = 0/1 - Field1 (odd)/Field2 (even) */
38 #define V4L2_MBUS_FIELD_EVEN_HIGH		BIT(10)
39 /* FIELD = 1/0 - Field1 (odd)/Field2 (even) */
40 #define V4L2_MBUS_FIELD_EVEN_LOW		BIT(11)
41 /* Active state of Sync-on-green (SoG) signal, 0/1 for LOW/HIGH respectively. */
42 #define V4L2_MBUS_VIDEO_SOG_ACTIVE_HIGH		BIT(12)
43 #define V4L2_MBUS_VIDEO_SOG_ACTIVE_LOW		BIT(13)
44 #define V4L2_MBUS_DATA_ENABLE_HIGH		BIT(14)
45 #define V4L2_MBUS_DATA_ENABLE_LOW		BIT(15)
46 
47 /* Serial flags */
48 /* How many lanes the client can use */
49 #define V4L2_MBUS_CSI2_1_LANE			BIT(0)
50 #define V4L2_MBUS_CSI2_2_LANE			BIT(1)
51 #define V4L2_MBUS_CSI2_3_LANE			BIT(2)
52 #define V4L2_MBUS_CSI2_4_LANE			BIT(3)
53 /* On which channels it can send video data */
54 #define V4L2_MBUS_CSI2_CHANNEL_0		BIT(4)
55 #define V4L2_MBUS_CSI2_CHANNEL_1		BIT(5)
56 #define V4L2_MBUS_CSI2_CHANNEL_2		BIT(6)
57 #define V4L2_MBUS_CSI2_CHANNEL_3		BIT(7)
58 /* Does it support only continuous or also non-continuous clock mode */
59 #define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK		BIT(8)
60 #define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK	BIT(9)
61 
62 #define V4L2_MBUS_CSI2_LANES		(V4L2_MBUS_CSI2_1_LANE | \
63 					 V4L2_MBUS_CSI2_2_LANE | \
64 					 V4L2_MBUS_CSI2_3_LANE | \
65 					 V4L2_MBUS_CSI2_4_LANE)
66 #define V4L2_MBUS_CSI2_CHANNELS		(V4L2_MBUS_CSI2_CHANNEL_0 | \
67 					 V4L2_MBUS_CSI2_CHANNEL_1 | \
68 					 V4L2_MBUS_CSI2_CHANNEL_2 | \
69 					 V4L2_MBUS_CSI2_CHANNEL_3)
70 
71 /**
72  * enum v4l2_mbus_type - media bus type
73  * @V4L2_MBUS_UNKNOWN:	unknown bus type, no V4L2 mediabus configuration
74  * @V4L2_MBUS_PARALLEL:	parallel interface with hsync and vsync
75  * @V4L2_MBUS_BT656:	parallel interface with embedded synchronisation, can
76  *			also be used for BT.1120
77  * @V4L2_MBUS_CSI1:	MIPI CSI-1 serial interface
78  * @V4L2_MBUS_CCP2:	CCP2 (Compact Camera Port 2)
79  * @V4L2_MBUS_CSI2_DPHY: MIPI CSI-2 serial interface, with D-PHY
80  * @V4L2_MBUS_CSI2_CPHY: MIPI CSI-2 serial interface, with C-PHY
81  */
82 enum v4l2_mbus_type {
83 	V4L2_MBUS_UNKNOWN,
84 	V4L2_MBUS_PARALLEL,
85 	V4L2_MBUS_BT656,
86 	V4L2_MBUS_CSI1,
87 	V4L2_MBUS_CCP2,
88 	V4L2_MBUS_CSI2_DPHY,
89 	V4L2_MBUS_CSI2_CPHY,
90 };
91 
92 /**
93  * struct v4l2_mbus_config - media bus configuration
94  * @type:	in: interface type
95  * @flags:	in / out: configuration flags, depending on @type
96  */
97 struct v4l2_mbus_config {
98 	enum v4l2_mbus_type type;
99 	unsigned int flags;
100 };
101 
102 /**
103  * v4l2_fill_pix_format - Ancillary routine that fills a &struct
104  *	v4l2_pix_format fields from a &struct v4l2_mbus_framefmt.
105  *
106  * @pix_fmt:	pointer to &struct v4l2_pix_format to be filled
107  * @mbus_fmt:	pointer to &struct v4l2_mbus_framefmt to be used as model
108  */
109 static inline void
110 v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt,
111 		     const struct v4l2_mbus_framefmt *mbus_fmt)
112 {
113 	pix_fmt->width = mbus_fmt->width;
114 	pix_fmt->height = mbus_fmt->height;
115 	pix_fmt->field = mbus_fmt->field;
116 	pix_fmt->colorspace = mbus_fmt->colorspace;
117 	pix_fmt->ycbcr_enc = mbus_fmt->ycbcr_enc;
118 	pix_fmt->quantization = mbus_fmt->quantization;
119 	pix_fmt->xfer_func = mbus_fmt->xfer_func;
120 }
121 
122 /**
123  * v4l2_fill_pix_format - Ancillary routine that fills a &struct
124  *	v4l2_mbus_framefmt from a &struct v4l2_pix_format and a
125  *	data format code.
126  *
127  * @mbus_fmt:	pointer to &struct v4l2_mbus_framefmt to be filled
128  * @pix_fmt:	pointer to &struct v4l2_pix_format to be used as model
129  * @code:	data format code (from &enum v4l2_mbus_pixelcode)
130  */
131 static inline void v4l2_fill_mbus_format(struct v4l2_mbus_framefmt *mbus_fmt,
132 					 const struct v4l2_pix_format *pix_fmt,
133 			   u32 code)
134 {
135 	mbus_fmt->width = pix_fmt->width;
136 	mbus_fmt->height = pix_fmt->height;
137 	mbus_fmt->field = pix_fmt->field;
138 	mbus_fmt->colorspace = pix_fmt->colorspace;
139 	mbus_fmt->ycbcr_enc = pix_fmt->ycbcr_enc;
140 	mbus_fmt->quantization = pix_fmt->quantization;
141 	mbus_fmt->xfer_func = pix_fmt->xfer_func;
142 	mbus_fmt->code = code;
143 }
144 
145 /**
146  * v4l2_fill_pix_format - Ancillary routine that fills a &struct
147  *	v4l2_pix_format_mplane fields from a media bus structure.
148  *
149  * @pix_mp_fmt:	pointer to &struct v4l2_pix_format_mplane to be filled
150  * @mbus_fmt:	pointer to &struct v4l2_mbus_framefmt to be used as model
151  */
152 static inline void
153 v4l2_fill_pix_format_mplane(struct v4l2_pix_format_mplane *pix_mp_fmt,
154 			    const struct v4l2_mbus_framefmt *mbus_fmt)
155 {
156 	pix_mp_fmt->width = mbus_fmt->width;
157 	pix_mp_fmt->height = mbus_fmt->height;
158 	pix_mp_fmt->field = mbus_fmt->field;
159 	pix_mp_fmt->colorspace = mbus_fmt->colorspace;
160 	pix_mp_fmt->ycbcr_enc = mbus_fmt->ycbcr_enc;
161 	pix_mp_fmt->quantization = mbus_fmt->quantization;
162 	pix_mp_fmt->xfer_func = mbus_fmt->xfer_func;
163 }
164 
165 /**
166  * v4l2_fill_pix_format - Ancillary routine that fills a &struct
167  *	v4l2_mbus_framefmt from a &struct v4l2_pix_format_mplane.
168  *
169  * @mbus_fmt:	pointer to &struct v4l2_mbus_framefmt to be filled
170  * @pix_mp_fmt:	pointer to &struct v4l2_pix_format_mplane to be used as model
171  */
172 static inline void
173 v4l2_fill_mbus_format_mplane(struct v4l2_mbus_framefmt *mbus_fmt,
174 			     const struct v4l2_pix_format_mplane *pix_mp_fmt)
175 {
176 	mbus_fmt->width = pix_mp_fmt->width;
177 	mbus_fmt->height = pix_mp_fmt->height;
178 	mbus_fmt->field = pix_mp_fmt->field;
179 	mbus_fmt->colorspace = pix_mp_fmt->colorspace;
180 	mbus_fmt->ycbcr_enc = pix_mp_fmt->ycbcr_enc;
181 	mbus_fmt->quantization = pix_mp_fmt->quantization;
182 	mbus_fmt->xfer_func = pix_mp_fmt->xfer_func;
183 }
184 
185 #endif
186