1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * USB Serial Converter stuff 4 * 5 * Copyright (C) 1999 - 2012 6 * Greg Kroah-Hartman (greg@kroah.com) 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; version 2 of the License. 11 * 12 */ 13 14 #ifndef __LINUX_USB_SERIAL_H 15 #define __LINUX_USB_SERIAL_H 16 17 #include <linux/kref.h> 18 #include <linux/mutex.h> 19 #include <linux/serial.h> 20 #include <linux/kfifo.h> 21 22 /* The maximum number of ports one device can grab at once */ 23 #define MAX_NUM_PORTS 16 24 25 /* USB serial flags */ 26 #define USB_SERIAL_WRITE_BUSY 0 27 #define USB_SERIAL_THROTTLED 1 28 29 /** 30 * usb_serial_port: structure for the specific ports of a device. 31 * @serial: pointer back to the struct usb_serial owner of this port. 32 * @port: pointer to the corresponding tty_port for this port. 33 * @lock: spinlock to grab when updating portions of this structure. 34 * @minor: the minor number of the port 35 * @port_number: the struct usb_serial port number of this port (starts at 0) 36 * @interrupt_in_buffer: pointer to the interrupt in buffer for this port. 37 * @interrupt_in_urb: pointer to the interrupt in struct urb for this port. 38 * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe 39 * for this port. 40 * @interrupt_out_buffer: pointer to the interrupt out buffer for this port. 41 * @interrupt_out_size: the size of the interrupt_out_buffer, in bytes. 42 * @interrupt_out_urb: pointer to the interrupt out struct urb for this port. 43 * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe 44 * for this port. 45 * @bulk_in_buffer: pointer to the bulk in buffer for this port. 46 * @bulk_in_size: the size of the bulk_in_buffer, in bytes. 47 * @read_urb: pointer to the bulk in struct urb for this port. 48 * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this 49 * port. 50 * @bulk_in_buffers: pointers to the bulk in buffers for this port 51 * @read_urbs: pointers to the bulk in urbs for this port 52 * @read_urbs_free: status bitmap the for bulk in urbs 53 * @bulk_out_buffer: pointer to the bulk out buffer for this port. 54 * @bulk_out_size: the size of the bulk_out_buffer, in bytes. 55 * @write_urb: pointer to the bulk out struct urb for this port. 56 * @write_fifo: kfifo used to buffer outgoing data 57 * @bulk_out_buffers: pointers to the bulk out buffers for this port 58 * @write_urbs: pointers to the bulk out urbs for this port 59 * @write_urbs_free: status bitmap the for bulk out urbs 60 * @icount: interrupt counters 61 * @tx_bytes: number of bytes currently in host stack queues 62 * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this 63 * port. 64 * @flags: usb serial port flags 65 * @work: work queue entry for the line discipline waking up. 66 * @dev: pointer to the serial device 67 * 68 * This structure is used by the usb-serial core and drivers for the specific 69 * ports of a device. 70 */ 71 struct usb_serial_port { 72 struct usb_serial *serial; 73 struct tty_port port; 74 spinlock_t lock; 75 u32 minor; 76 u8 port_number; 77 78 unsigned char *interrupt_in_buffer; 79 struct urb *interrupt_in_urb; 80 __u8 interrupt_in_endpointAddress; 81 82 unsigned char *interrupt_out_buffer; 83 int interrupt_out_size; 84 struct urb *interrupt_out_urb; 85 __u8 interrupt_out_endpointAddress; 86 87 unsigned char *bulk_in_buffer; 88 int bulk_in_size; 89 struct urb *read_urb; 90 __u8 bulk_in_endpointAddress; 91 92 unsigned char *bulk_in_buffers[2]; 93 struct urb *read_urbs[2]; 94 unsigned long read_urbs_free; 95 96 unsigned char *bulk_out_buffer; 97 int bulk_out_size; 98 struct urb *write_urb; 99 struct kfifo write_fifo; 100 101 unsigned char *bulk_out_buffers[2]; 102 struct urb *write_urbs[2]; 103 unsigned long write_urbs_free; 104 __u8 bulk_out_endpointAddress; 105 106 struct async_icount icount; 107 int tx_bytes; 108 109 unsigned long flags; 110 struct work_struct work; 111 unsigned long sysrq; /* sysrq timeout */ 112 struct device dev; 113 }; 114 #define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev) 115 116 /* get and set the port private data pointer helper functions */ 117 static inline void *usb_get_serial_port_data(struct usb_serial_port *port) 118 { 119 return dev_get_drvdata(&port->dev); 120 } 121 122 static inline void usb_set_serial_port_data(struct usb_serial_port *port, 123 void *data) 124 { 125 dev_set_drvdata(&port->dev, data); 126 } 127 128 /** 129 * usb_serial - structure used by the usb-serial core for a device 130 * @dev: pointer to the struct usb_device for this device 131 * @type: pointer to the struct usb_serial_driver for this device 132 * @interface: pointer to the struct usb_interface for this device 133 * @num_ports: the number of ports this device has 134 * @num_interrupt_in: number of interrupt in endpoints we have 135 * @num_interrupt_out: number of interrupt out endpoints we have 136 * @num_bulk_in: number of bulk in endpoints we have 137 * @num_bulk_out: number of bulk out endpoints we have 138 * @port: array of struct usb_serial_port structures for the different ports. 139 * @private: place to put any driver specific information that is needed. The 140 * usb-serial driver is required to manage this data, the usb-serial core 141 * will not touch this. Use usb_get_serial_data() and 142 * usb_set_serial_data() to access this. 143 */ 144 struct usb_serial { 145 struct usb_device *dev; 146 struct usb_serial_driver *type; 147 struct usb_interface *interface; 148 unsigned char disconnected:1; 149 unsigned char suspending:1; 150 unsigned char attached:1; 151 unsigned char minors_reserved:1; 152 unsigned char num_ports; 153 unsigned char num_port_pointers; 154 unsigned char num_interrupt_in; 155 unsigned char num_interrupt_out; 156 unsigned char num_bulk_in; 157 unsigned char num_bulk_out; 158 struct usb_serial_port *port[MAX_NUM_PORTS]; 159 struct kref kref; 160 struct mutex disc_mutex; 161 void *private; 162 }; 163 #define to_usb_serial(d) container_of(d, struct usb_serial, kref) 164 165 /* get and set the serial private data pointer helper functions */ 166 static inline void *usb_get_serial_data(struct usb_serial *serial) 167 { 168 return serial->private; 169 } 170 171 static inline void usb_set_serial_data(struct usb_serial *serial, void *data) 172 { 173 serial->private = data; 174 } 175 176 struct usb_serial_endpoints { 177 unsigned char num_bulk_in; 178 unsigned char num_bulk_out; 179 unsigned char num_interrupt_in; 180 unsigned char num_interrupt_out; 181 struct usb_endpoint_descriptor *bulk_in[MAX_NUM_PORTS]; 182 struct usb_endpoint_descriptor *bulk_out[MAX_NUM_PORTS]; 183 struct usb_endpoint_descriptor *interrupt_in[MAX_NUM_PORTS]; 184 struct usb_endpoint_descriptor *interrupt_out[MAX_NUM_PORTS]; 185 }; 186 187 /** 188 * usb_serial_driver - describes a usb serial driver 189 * @description: pointer to a string that describes this driver. This string 190 * used in the syslog messages when a device is inserted or removed. 191 * @id_table: pointer to a list of usb_device_id structures that define all 192 * of the devices this structure can support. 193 * @num_ports: the number of different ports this device will have. 194 * @num_bulk_in: minimum number of bulk-in endpoints 195 * @num_bulk_out: minimum number of bulk-out endpoints 196 * @num_interrupt_in: minimum number of interrupt-in endpoints 197 * @num_interrupt_out: minimum number of interrupt-out endpoints 198 * @bulk_in_size: minimum number of bytes to allocate for bulk-in buffer 199 * (0 = end-point size) 200 * @bulk_out_size: bytes to allocate for bulk-out buffer (0 = end-point size) 201 * @calc_num_ports: pointer to a function to determine how many ports this 202 * device has dynamically. It can also be used to verify the number of 203 * endpoints or to modify the port-endpoint mapping. It will be called 204 * after the probe() callback is called, but before attach(). 205 * @probe: pointer to the driver's probe function. 206 * This will be called when the device is inserted into the system, 207 * but before the device has been fully initialized by the usb_serial 208 * subsystem. Use this function to download any firmware to the device, 209 * or any other early initialization that might be needed. 210 * Return 0 to continue on with the initialization sequence. Anything 211 * else will abort it. 212 * @attach: pointer to the driver's attach function. 213 * This will be called when the struct usb_serial structure is fully 214 * set up. Do any local initialization of the device, or any private 215 * memory structure allocation at this point in time. 216 * @disconnect: pointer to the driver's disconnect function. This will be 217 * called when the device is unplugged or unbound from the driver. 218 * @release: pointer to the driver's release function. This will be called 219 * when the usb_serial data structure is about to be destroyed. 220 * @usb_driver: pointer to the struct usb_driver that controls this 221 * device. This is necessary to allow dynamic ids to be added to 222 * the driver from sysfs. 223 * 224 * This structure is defines a USB Serial driver. It provides all of 225 * the information that the USB serial core code needs. If the function 226 * pointers are defined, then the USB serial core code will call them when 227 * the corresponding tty port functions are called. If they are not 228 * called, the generic serial function will be used instead. 229 * 230 * The driver.owner field should be set to the module owner of this driver. 231 * The driver.name field should be set to the name of this driver (remember 232 * it will show up in sysfs, so it needs to be short and to the point. 233 * Using the module name is a good idea.) 234 */ 235 struct usb_serial_driver { 236 const char *description; 237 const struct usb_device_id *id_table; 238 239 struct list_head driver_list; 240 struct device_driver driver; 241 struct usb_driver *usb_driver; 242 struct usb_dynids dynids; 243 244 unsigned char num_ports; 245 246 unsigned char num_bulk_in; 247 unsigned char num_bulk_out; 248 unsigned char num_interrupt_in; 249 unsigned char num_interrupt_out; 250 251 size_t bulk_in_size; 252 size_t bulk_out_size; 253 254 int (*probe)(struct usb_serial *serial, const struct usb_device_id *id); 255 int (*attach)(struct usb_serial *serial); 256 int (*calc_num_ports)(struct usb_serial *serial, 257 struct usb_serial_endpoints *epds); 258 259 void (*disconnect)(struct usb_serial *serial); 260 void (*release)(struct usb_serial *serial); 261 262 int (*port_probe)(struct usb_serial_port *port); 263 void (*port_remove)(struct usb_serial_port *port); 264 265 int (*suspend)(struct usb_serial *serial, pm_message_t message); 266 int (*resume)(struct usb_serial *serial); 267 int (*reset_resume)(struct usb_serial *serial); 268 269 /* serial function calls */ 270 /* Called by console and by the tty layer */ 271 int (*open)(struct tty_struct *tty, struct usb_serial_port *port); 272 void (*close)(struct usb_serial_port *port); 273 int (*write)(struct tty_struct *tty, struct usb_serial_port *port, 274 const unsigned char *buf, int count); 275 /* Called only by the tty layer */ 276 int (*write_room)(struct tty_struct *tty); 277 int (*ioctl)(struct tty_struct *tty, 278 unsigned int cmd, unsigned long arg); 279 int (*get_serial)(struct tty_struct *tty, struct serial_struct *ss); 280 int (*set_serial)(struct tty_struct *tty, struct serial_struct *ss); 281 void (*set_termios)(struct tty_struct *tty, 282 struct usb_serial_port *port, struct ktermios *old); 283 void (*break_ctl)(struct tty_struct *tty, int break_state); 284 int (*chars_in_buffer)(struct tty_struct *tty); 285 void (*wait_until_sent)(struct tty_struct *tty, long timeout); 286 bool (*tx_empty)(struct usb_serial_port *port); 287 void (*throttle)(struct tty_struct *tty); 288 void (*unthrottle)(struct tty_struct *tty); 289 int (*tiocmget)(struct tty_struct *tty); 290 int (*tiocmset)(struct tty_struct *tty, 291 unsigned int set, unsigned int clear); 292 int (*tiocmiwait)(struct tty_struct *tty, unsigned long arg); 293 int (*get_icount)(struct tty_struct *tty, 294 struct serial_icounter_struct *icount); 295 /* Called by the tty layer for port level work. There may or may not 296 be an attached tty at this point */ 297 void (*dtr_rts)(struct usb_serial_port *port, int on); 298 int (*carrier_raised)(struct usb_serial_port *port); 299 /* Called by the usb serial hooks to allow the user to rework the 300 termios state */ 301 void (*init_termios)(struct tty_struct *tty); 302 /* USB events */ 303 void (*read_int_callback)(struct urb *urb); 304 void (*write_int_callback)(struct urb *urb); 305 void (*read_bulk_callback)(struct urb *urb); 306 void (*write_bulk_callback)(struct urb *urb); 307 /* Called by the generic read bulk callback */ 308 void (*process_read_urb)(struct urb *urb); 309 /* Called by the generic write implementation */ 310 int (*prepare_write_buffer)(struct usb_serial_port *port, 311 void *dest, size_t size); 312 }; 313 #define to_usb_serial_driver(d) \ 314 container_of(d, struct usb_serial_driver, driver) 315 316 int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[], 317 const char *name, const struct usb_device_id *id_table); 318 void usb_serial_deregister_drivers(struct usb_serial_driver *const serial_drivers[]); 319 void usb_serial_port_softint(struct usb_serial_port *port); 320 321 int usb_serial_suspend(struct usb_interface *intf, pm_message_t message); 322 int usb_serial_resume(struct usb_interface *intf); 323 324 /* USB Serial console functions */ 325 #ifdef CONFIG_USB_SERIAL_CONSOLE 326 void usb_serial_console_init(int minor); 327 void usb_serial_console_exit(void); 328 void usb_serial_console_disconnect(struct usb_serial *serial); 329 #else 330 static inline void usb_serial_console_init(int minor) { } 331 static inline void usb_serial_console_exit(void) { } 332 static inline void usb_serial_console_disconnect(struct usb_serial *serial) {} 333 #endif 334 335 /* Functions needed by other parts of the usbserial core */ 336 struct usb_serial_port *usb_serial_port_get_by_minor(unsigned int minor); 337 void usb_serial_put(struct usb_serial *serial); 338 int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port); 339 int usb_serial_generic_write_start(struct usb_serial_port *port, gfp_t mem_flags); 340 int usb_serial_generic_write(struct tty_struct *tty, struct usb_serial_port *port, 341 const unsigned char *buf, int count); 342 void usb_serial_generic_close(struct usb_serial_port *port); 343 int usb_serial_generic_resume(struct usb_serial *serial); 344 int usb_serial_generic_write_room(struct tty_struct *tty); 345 int usb_serial_generic_chars_in_buffer(struct tty_struct *tty); 346 void usb_serial_generic_wait_until_sent(struct tty_struct *tty, long timeout); 347 void usb_serial_generic_read_bulk_callback(struct urb *urb); 348 void usb_serial_generic_write_bulk_callback(struct urb *urb); 349 void usb_serial_generic_throttle(struct tty_struct *tty); 350 void usb_serial_generic_unthrottle(struct tty_struct *tty); 351 int usb_serial_generic_tiocmiwait(struct tty_struct *tty, unsigned long arg); 352 int usb_serial_generic_get_icount(struct tty_struct *tty, struct serial_icounter_struct *icount); 353 int usb_serial_generic_register(void); 354 void usb_serial_generic_deregister(void); 355 int usb_serial_generic_submit_read_urbs(struct usb_serial_port *port, gfp_t mem_flags); 356 void usb_serial_generic_process_read_urb(struct urb *urb); 357 int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port, void *dest, size_t size); 358 359 #if defined(CONFIG_USB_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) 360 int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch); 361 int usb_serial_handle_break(struct usb_serial_port *port); 362 #else 363 static inline int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch) 364 { 365 return 0; 366 } 367 static inline int usb_serial_handle_break(struct usb_serial_port *port) 368 { 369 return 0; 370 } 371 #endif 372 373 void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port, 374 struct tty_struct *tty, unsigned int status); 375 376 377 int usb_serial_bus_register(struct usb_serial_driver *device); 378 void usb_serial_bus_deregister(struct usb_serial_driver *device); 379 380 extern struct bus_type usb_serial_bus_type; 381 extern struct tty_driver *usb_serial_tty_driver; 382 383 static inline void usb_serial_debug_data(struct device *dev, 384 const char *function, int size, 385 const unsigned char *data) 386 { 387 dev_dbg(dev, "%s - length = %d, data = %*ph\n", 388 function, size, size, data); 389 } 390 391 /* 392 * Macro for reporting errors in write path to avoid inifinite loop 393 * when port is used as a console. 394 */ 395 #define dev_err_console(usport, fmt, ...) \ 396 do { \ 397 static bool __print_once; \ 398 struct usb_serial_port *__port = (usport); \ 399 \ 400 if (!__port->port.console || !__print_once) { \ 401 __print_once = true; \ 402 dev_err(&__port->dev, fmt, ##__VA_ARGS__); \ 403 } \ 404 } while (0) 405 406 /* 407 * module_usb_serial_driver() - Helper macro for registering a USB Serial driver 408 * @__serial_drivers: list of usb_serial drivers to register 409 * @__ids: all device ids that @__serial_drivers bind to 410 * 411 * Helper macro for USB serial drivers which do not do anything special 412 * in module init/exit. This eliminates a lot of boilerplate. Each 413 * module may only use this macro once, and calling it replaces 414 * module_init() and module_exit() 415 * 416 */ 417 #define usb_serial_module_driver(__name, __serial_drivers, __ids) \ 418 static int __init usb_serial_module_init(void) \ 419 { \ 420 return usb_serial_register_drivers(__serial_drivers, \ 421 __name, __ids); \ 422 } \ 423 module_init(usb_serial_module_init); \ 424 static void __exit usb_serial_module_exit(void) \ 425 { \ 426 usb_serial_deregister_drivers(__serial_drivers); \ 427 } \ 428 module_exit(usb_serial_module_exit); 429 430 #define module_usb_serial_driver(__serial_drivers, __ids) \ 431 usb_serial_module_driver(KBUILD_MODNAME, __serial_drivers, __ids) 432 433 #endif /* __LINUX_USB_SERIAL_H */ 434 435