1 /* 2 * USB Serial Converter stuff 3 * 4 * Copyright (C) 1999 - 2012 5 * Greg Kroah-Hartman (greg@kroah.com) 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; version 2 of the License. 10 * 11 */ 12 13 #ifndef __LINUX_USB_SERIAL_H 14 #define __LINUX_USB_SERIAL_H 15 16 #include <linux/kref.h> 17 #include <linux/mutex.h> 18 #include <linux/serial.h> 19 #include <linux/sysrq.h> 20 #include <linux/kfifo.h> 21 22 /* The maximum number of ports one device can grab at once */ 23 #define MAX_NUM_PORTS 8 24 25 /* parity check flag */ 26 #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) 27 28 /* USB serial flags */ 29 #define USB_SERIAL_WRITE_BUSY 0 30 31 /** 32 * usb_serial_port: structure for the specific ports of a device. 33 * @serial: pointer back to the struct usb_serial owner of this port. 34 * @port: pointer to the corresponding tty_port for this port. 35 * @lock: spinlock to grab when updating portions of this structure. 36 * @minor: the minor number of the port 37 * @port_number: the struct usb_serial port number of this port (starts at 0) 38 * @interrupt_in_buffer: pointer to the interrupt in buffer for this port. 39 * @interrupt_in_urb: pointer to the interrupt in struct urb for this port. 40 * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe 41 * for this port. 42 * @interrupt_out_buffer: pointer to the interrupt out buffer for this port. 43 * @interrupt_out_size: the size of the interrupt_out_buffer, in bytes. 44 * @interrupt_out_urb: pointer to the interrupt out struct urb for this port. 45 * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe 46 * for this port. 47 * @bulk_in_buffer: pointer to the bulk in buffer for this port. 48 * @bulk_in_size: the size of the bulk_in_buffer, in bytes. 49 * @read_urb: pointer to the bulk in struct urb for this port. 50 * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this 51 * port. 52 * @bulk_in_buffers: pointers to the bulk in buffers for this port 53 * @read_urbs: pointers to the bulk in urbs for this port 54 * @read_urbs_free: status bitmap the for bulk in urbs 55 * @bulk_out_buffer: pointer to the bulk out buffer for this port. 56 * @bulk_out_size: the size of the bulk_out_buffer, in bytes. 57 * @write_urb: pointer to the bulk out struct urb for this port. 58 * @write_fifo: kfifo used to buffer outgoing data 59 * @bulk_out_buffers: pointers to the bulk out buffers for this port 60 * @write_urbs: pointers to the bulk out urbs for this port 61 * @write_urbs_free: status bitmap the for bulk out urbs 62 * @icount: interrupt counters 63 * @tx_bytes: number of bytes currently in host stack queues 64 * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this 65 * port. 66 * @flags: usb serial port flags 67 * @write_wait: a wait_queue_head_t used by the port. 68 * @work: work queue entry for the line discipline waking up. 69 * @throttled: nonzero if the read urb is inactive to throttle the device 70 * @throttle_req: nonzero if the tty wants to throttle us 71 * @dev: pointer to the serial device 72 * 73 * This structure is used by the usb-serial core and drivers for the specific 74 * ports of a device. 75 */ 76 struct usb_serial_port { 77 struct usb_serial *serial; 78 struct tty_port port; 79 spinlock_t lock; 80 u32 minor; 81 u8 port_number; 82 83 unsigned char *interrupt_in_buffer; 84 struct urb *interrupt_in_urb; 85 __u8 interrupt_in_endpointAddress; 86 87 unsigned char *interrupt_out_buffer; 88 int interrupt_out_size; 89 struct urb *interrupt_out_urb; 90 __u8 interrupt_out_endpointAddress; 91 92 unsigned char *bulk_in_buffer; 93 int bulk_in_size; 94 struct urb *read_urb; 95 __u8 bulk_in_endpointAddress; 96 97 unsigned char *bulk_in_buffers[2]; 98 struct urb *read_urbs[2]; 99 unsigned long read_urbs_free; 100 101 unsigned char *bulk_out_buffer; 102 int bulk_out_size; 103 struct urb *write_urb; 104 struct kfifo write_fifo; 105 106 unsigned char *bulk_out_buffers[2]; 107 struct urb *write_urbs[2]; 108 unsigned long write_urbs_free; 109 __u8 bulk_out_endpointAddress; 110 111 struct async_icount icount; 112 int tx_bytes; 113 114 unsigned long flags; 115 wait_queue_head_t write_wait; 116 struct work_struct work; 117 char throttled; 118 char throttle_req; 119 unsigned long sysrq; /* sysrq timeout */ 120 struct device dev; 121 }; 122 #define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev) 123 124 /* get and set the port private data pointer helper functions */ 125 static inline void *usb_get_serial_port_data(struct usb_serial_port *port) 126 { 127 return dev_get_drvdata(&port->dev); 128 } 129 130 static inline void usb_set_serial_port_data(struct usb_serial_port *port, 131 void *data) 132 { 133 dev_set_drvdata(&port->dev, data); 134 } 135 136 /** 137 * usb_serial - structure used by the usb-serial core for a device 138 * @dev: pointer to the struct usb_device for this device 139 * @type: pointer to the struct usb_serial_driver for this device 140 * @interface: pointer to the struct usb_interface for this device 141 * @num_ports: the number of ports this device has 142 * @num_interrupt_in: number of interrupt in endpoints we have 143 * @num_interrupt_out: number of interrupt out endpoints we have 144 * @num_bulk_in: number of bulk in endpoints we have 145 * @num_bulk_out: number of bulk out endpoints we have 146 * @port: array of struct usb_serial_port structures for the different ports. 147 * @private: place to put any driver specific information that is needed. The 148 * usb-serial driver is required to manage this data, the usb-serial core 149 * will not touch this. Use usb_get_serial_data() and 150 * usb_set_serial_data() to access this. 151 */ 152 struct usb_serial { 153 struct usb_device *dev; 154 struct usb_serial_driver *type; 155 struct usb_interface *interface; 156 unsigned char disconnected:1; 157 unsigned char suspending:1; 158 unsigned char attached:1; 159 unsigned char minors_reserved:1; 160 unsigned char num_ports; 161 unsigned char num_port_pointers; 162 char num_interrupt_in; 163 char num_interrupt_out; 164 char num_bulk_in; 165 char num_bulk_out; 166 struct usb_serial_port *port[MAX_NUM_PORTS]; 167 struct kref kref; 168 struct mutex disc_mutex; 169 void *private; 170 }; 171 #define to_usb_serial(d) container_of(d, struct usb_serial, kref) 172 173 /* get and set the serial private data pointer helper functions */ 174 static inline void *usb_get_serial_data(struct usb_serial *serial) 175 { 176 return serial->private; 177 } 178 179 static inline void usb_set_serial_data(struct usb_serial *serial, void *data) 180 { 181 serial->private = data; 182 } 183 184 /** 185 * usb_serial_driver - describes a usb serial driver 186 * @description: pointer to a string that describes this driver. This string 187 * used in the syslog messages when a device is inserted or removed. 188 * @id_table: pointer to a list of usb_device_id structures that define all 189 * of the devices this structure can support. 190 * @num_ports: the number of different ports this device will have. 191 * @bulk_in_size: minimum number of bytes to allocate for bulk-in buffer 192 * (0 = end-point size) 193 * @bulk_out_size: bytes to allocate for bulk-out buffer (0 = end-point size) 194 * @calc_num_ports: pointer to a function to determine how many ports this 195 * device has dynamically. It will be called after the probe() 196 * callback is called, but before attach() 197 * @probe: pointer to the driver's probe function. 198 * This will be called when the device is inserted into the system, 199 * but before the device has been fully initialized by the usb_serial 200 * subsystem. Use this function to download any firmware to the device, 201 * or any other early initialization that might be needed. 202 * Return 0 to continue on with the initialization sequence. Anything 203 * else will abort it. 204 * @attach: pointer to the driver's attach function. 205 * This will be called when the struct usb_serial structure is fully set 206 * set up. Do any local initialization of the device, or any private 207 * memory structure allocation at this point in time. 208 * @disconnect: pointer to the driver's disconnect function. This will be 209 * called when the device is unplugged or unbound from the driver. 210 * @release: pointer to the driver's release function. This will be called 211 * when the usb_serial data structure is about to be destroyed. 212 * @usb_driver: pointer to the struct usb_driver that controls this 213 * device. This is necessary to allow dynamic ids to be added to 214 * the driver from sysfs. 215 * 216 * This structure is defines a USB Serial driver. It provides all of 217 * the information that the USB serial core code needs. If the function 218 * pointers are defined, then the USB serial core code will call them when 219 * the corresponding tty port functions are called. If they are not 220 * called, the generic serial function will be used instead. 221 * 222 * The driver.owner field should be set to the module owner of this driver. 223 * The driver.name field should be set to the name of this driver (remember 224 * it will show up in sysfs, so it needs to be short and to the point. 225 * Using the module name is a good idea.) 226 */ 227 struct usb_serial_driver { 228 const char *description; 229 const struct usb_device_id *id_table; 230 char num_ports; 231 232 struct list_head driver_list; 233 struct device_driver driver; 234 struct usb_driver *usb_driver; 235 struct usb_dynids dynids; 236 237 size_t bulk_in_size; 238 size_t bulk_out_size; 239 240 int (*probe)(struct usb_serial *serial, const struct usb_device_id *id); 241 int (*attach)(struct usb_serial *serial); 242 int (*calc_num_ports) (struct usb_serial *serial); 243 244 void (*disconnect)(struct usb_serial *serial); 245 void (*release)(struct usb_serial *serial); 246 247 int (*port_probe)(struct usb_serial_port *port); 248 int (*port_remove)(struct usb_serial_port *port); 249 250 int (*suspend)(struct usb_serial *serial, pm_message_t message); 251 int (*resume)(struct usb_serial *serial); 252 int (*reset_resume)(struct usb_serial *serial); 253 254 /* serial function calls */ 255 /* Called by console and by the tty layer */ 256 int (*open)(struct tty_struct *tty, struct usb_serial_port *port); 257 void (*close)(struct usb_serial_port *port); 258 int (*write)(struct tty_struct *tty, struct usb_serial_port *port, 259 const unsigned char *buf, int count); 260 /* Called only by the tty layer */ 261 int (*write_room)(struct tty_struct *tty); 262 int (*ioctl)(struct tty_struct *tty, 263 unsigned int cmd, unsigned long arg); 264 void (*set_termios)(struct tty_struct *tty, 265 struct usb_serial_port *port, struct ktermios *old); 266 void (*break_ctl)(struct tty_struct *tty, int break_state); 267 int (*chars_in_buffer)(struct tty_struct *tty); 268 void (*wait_until_sent)(struct tty_struct *tty, long timeout); 269 bool (*tx_empty)(struct usb_serial_port *port); 270 void (*throttle)(struct tty_struct *tty); 271 void (*unthrottle)(struct tty_struct *tty); 272 int (*tiocmget)(struct tty_struct *tty); 273 int (*tiocmset)(struct tty_struct *tty, 274 unsigned int set, unsigned int clear); 275 int (*tiocmiwait)(struct tty_struct *tty, unsigned long arg); 276 int (*get_icount)(struct tty_struct *tty, 277 struct serial_icounter_struct *icount); 278 /* Called by the tty layer for port level work. There may or may not 279 be an attached tty at this point */ 280 void (*dtr_rts)(struct usb_serial_port *port, int on); 281 int (*carrier_raised)(struct usb_serial_port *port); 282 /* Called by the usb serial hooks to allow the user to rework the 283 termios state */ 284 void (*init_termios)(struct tty_struct *tty); 285 /* USB events */ 286 void (*read_int_callback)(struct urb *urb); 287 void (*write_int_callback)(struct urb *urb); 288 void (*read_bulk_callback)(struct urb *urb); 289 void (*write_bulk_callback)(struct urb *urb); 290 /* Called by the generic read bulk callback */ 291 void (*process_read_urb)(struct urb *urb); 292 /* Called by the generic write implementation */ 293 int (*prepare_write_buffer)(struct usb_serial_port *port, 294 void *dest, size_t size); 295 }; 296 #define to_usb_serial_driver(d) \ 297 container_of(d, struct usb_serial_driver, driver) 298 299 extern int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[], 300 const char *name, const struct usb_device_id *id_table); 301 extern void usb_serial_deregister_drivers(struct usb_serial_driver *const serial_drivers[]); 302 extern void usb_serial_port_softint(struct usb_serial_port *port); 303 304 extern int usb_serial_suspend(struct usb_interface *intf, pm_message_t message); 305 extern int usb_serial_resume(struct usb_interface *intf); 306 307 /* USB Serial console functions */ 308 #ifdef CONFIG_USB_SERIAL_CONSOLE 309 extern void usb_serial_console_init(int minor); 310 extern void usb_serial_console_exit(void); 311 extern void usb_serial_console_disconnect(struct usb_serial *serial); 312 #else 313 static inline void usb_serial_console_init(int minor) { } 314 static inline void usb_serial_console_exit(void) { } 315 static inline void usb_serial_console_disconnect(struct usb_serial *serial) {} 316 #endif 317 318 /* Functions needed by other parts of the usbserial core */ 319 extern struct usb_serial_port *usb_serial_port_get_by_minor(unsigned int minor); 320 extern void usb_serial_put(struct usb_serial *serial); 321 extern int usb_serial_generic_open(struct tty_struct *tty, 322 struct usb_serial_port *port); 323 extern int usb_serial_generic_write_start(struct usb_serial_port *port, 324 gfp_t mem_flags); 325 extern int usb_serial_generic_write(struct tty_struct *tty, 326 struct usb_serial_port *port, const unsigned char *buf, int count); 327 extern void usb_serial_generic_close(struct usb_serial_port *port); 328 extern int usb_serial_generic_resume(struct usb_serial *serial); 329 extern int usb_serial_generic_write_room(struct tty_struct *tty); 330 extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty); 331 extern void usb_serial_generic_wait_until_sent(struct tty_struct *tty, 332 long timeout); 333 extern void usb_serial_generic_read_bulk_callback(struct urb *urb); 334 extern void usb_serial_generic_write_bulk_callback(struct urb *urb); 335 extern void usb_serial_generic_throttle(struct tty_struct *tty); 336 extern void usb_serial_generic_unthrottle(struct tty_struct *tty); 337 extern int usb_serial_generic_tiocmiwait(struct tty_struct *tty, 338 unsigned long arg); 339 extern int usb_serial_generic_get_icount(struct tty_struct *tty, 340 struct serial_icounter_struct *icount); 341 extern int usb_serial_generic_register(void); 342 extern void usb_serial_generic_deregister(void); 343 extern int usb_serial_generic_submit_read_urbs(struct usb_serial_port *port, 344 gfp_t mem_flags); 345 extern void usb_serial_generic_process_read_urb(struct urb *urb); 346 extern int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port, 347 void *dest, size_t size); 348 extern int usb_serial_handle_sysrq_char(struct usb_serial_port *port, 349 unsigned int ch); 350 extern int usb_serial_handle_break(struct usb_serial_port *port); 351 extern void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port, 352 struct tty_struct *tty, 353 unsigned int status); 354 355 356 extern int usb_serial_bus_register(struct usb_serial_driver *device); 357 extern void usb_serial_bus_deregister(struct usb_serial_driver *device); 358 359 extern struct usb_serial_driver usb_serial_generic_device; 360 extern struct bus_type usb_serial_bus_type; 361 extern struct tty_driver *usb_serial_tty_driver; 362 363 static inline void usb_serial_debug_data(struct device *dev, 364 const char *function, int size, 365 const unsigned char *data) 366 { 367 dev_dbg(dev, "%s - length = %d, data = %*ph\n", 368 function, size, size, data); 369 } 370 371 /* 372 * Macro for reporting errors in write path to avoid inifinite loop 373 * when port is used as a console. 374 */ 375 #define dev_err_console(usport, fmt, ...) \ 376 do { \ 377 static bool __print_once; \ 378 struct usb_serial_port *__port = (usport); \ 379 \ 380 if (!__port->port.console || !__print_once) { \ 381 __print_once = true; \ 382 dev_err(&__port->dev, fmt, ##__VA_ARGS__); \ 383 } \ 384 } while (0) 385 386 /* 387 * module_usb_serial_driver() - Helper macro for registering a USB Serial driver 388 * @__serial_drivers: list of usb_serial drivers to register 389 * @__ids: all device ids that @__serial_drivers bind to 390 * 391 * Helper macro for USB serial drivers which do not do anything special 392 * in module init/exit. This eliminates a lot of boilerplate. Each 393 * module may only use this macro once, and calling it replaces 394 * module_init() and module_exit() 395 * 396 */ 397 #define usb_serial_module_driver(__name, __serial_drivers, __ids) \ 398 static int __init usb_serial_module_init(void) \ 399 { \ 400 return usb_serial_register_drivers(__serial_drivers, \ 401 __name, __ids); \ 402 } \ 403 module_init(usb_serial_module_init); \ 404 static void __exit usb_serial_module_exit(void) \ 405 { \ 406 usb_serial_deregister_drivers(__serial_drivers); \ 407 } \ 408 module_exit(usb_serial_module_exit); 409 410 #define module_usb_serial_driver(__serial_drivers, __ids) \ 411 usb_serial_module_driver(KBUILD_MODNAME, __serial_drivers, __ids) 412 413 #endif /* __LINUX_USB_SERIAL_H */ 414 415