1 2 /* 3 * Board initialization code should put one of these into dev->platform_data 4 * and place the isp116x onto platform_bus. 5 */ 6 7 struct isp116x_platform_data { 8 /* Enable internal resistors on downstream ports */ 9 unsigned sel15Kres:1; 10 /* On-chip overcurrent detection */ 11 unsigned oc_enable:1; 12 /* INT output polarity */ 13 unsigned int_act_high:1; 14 /* INT edge or level triggered */ 15 unsigned int_edge_triggered:1; 16 /* Enable wakeup by devices on usb bus (e.g. wakeup 17 by attachment/detachment or by device activity 18 such as moving a mouse). When chosen, this option 19 prevents stopping internal clock, increasing 20 thereby power consumption in suspended state. */ 21 unsigned remote_wakeup_enable:1; 22 /* Inter-io delay (ns). The chip is picky about access timings; it 23 expects at least: 24 150ns delay between consecutive accesses to DATA_REG, 25 300ns delay between access to ADDR_REG and DATA_REG 26 OE, WE MUST NOT be changed during these intervals 27 */ 28 void (*delay) (struct device * dev, int delay); 29 }; 30