1 /* 2 * Copyright (c) 2001-2002 by David Brownell 3 * 4 * This program is free software; you can redistribute it and/or modify it 5 * under the terms of the GNU General Public License as published by the 6 * Free Software Foundation; either version 2 of the License, or (at your 7 * option) any later version. 8 * 9 * This program is distributed in the hope that it will be useful, but 10 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 11 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 12 * for more details. 13 * 14 * You should have received a copy of the GNU General Public License 15 * along with this program; if not, write to the Free Software Foundation, 16 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 17 */ 18 19 #ifndef __LINUX_USB_EHCI_DEF_H 20 #define __LINUX_USB_EHCI_DEF_H 21 22 #include <linux/usb/ehci-dbgp.h> 23 24 /* EHCI register interface, corresponds to EHCI Revision 0.95 specification */ 25 26 /* Section 2.2 Host Controller Capability Registers */ 27 struct ehci_caps { 28 /* these fields are specified as 8 and 16 bit registers, 29 * but some hosts can't perform 8 or 16 bit PCI accesses. 30 * some hosts treat caplength and hciversion as parts of a 32-bit 31 * register, others treat them as two separate registers, this 32 * affects the memory map for big endian controllers. 33 */ 34 u32 hc_capbase; 35 #define HC_LENGTH(ehci, p) (0x00ff&((p) >> /* bits 7:0 / offset 00h */ \ 36 (ehci_big_endian_capbase(ehci) ? 24 : 0))) 37 #define HC_VERSION(ehci, p) (0xffff&((p) >> /* bits 31:16 / offset 02h */ \ 38 (ehci_big_endian_capbase(ehci) ? 0 : 16))) 39 u32 hcs_params; /* HCSPARAMS - offset 0x4 */ 40 #define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */ 41 #define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */ 42 #define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */ 43 #define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */ 44 #define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */ 45 #define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */ 46 #define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */ 47 48 u32 hcc_params; /* HCCPARAMS - offset 0x8 */ 49 /* EHCI 1.1 addendum */ 50 #define HCC_32FRAME_PERIODIC_LIST(p) ((p)&(1 << 19)) 51 #define HCC_PER_PORT_CHANGE_EVENT(p) ((p)&(1 << 18)) 52 #define HCC_LPM(p) ((p)&(1 << 17)) 53 #define HCC_HW_PREFETCH(p) ((p)&(1 << 16)) 54 55 #define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */ 56 #define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */ 57 #define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */ 58 #define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */ 59 #define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/ 60 #define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */ 61 u8 portroute[8]; /* nibbles for routing - offset 0xC */ 62 }; 63 64 65 /* Section 2.3 Host Controller Operational Registers */ 66 struct ehci_regs { 67 68 /* USBCMD: offset 0x00 */ 69 u32 command; 70 71 /* EHCI 1.1 addendum */ 72 #define CMD_HIRD (0xf<<24) /* host initiated resume duration */ 73 #define CMD_PPCEE (1<<15) /* per port change event enable */ 74 #define CMD_FSP (1<<14) /* fully synchronized prefetch */ 75 #define CMD_ASPE (1<<13) /* async schedule prefetch enable */ 76 #define CMD_PSPE (1<<12) /* periodic schedule prefetch enable */ 77 /* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */ 78 #define CMD_PARK (1<<11) /* enable "park" on async qh */ 79 #define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */ 80 #define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */ 81 #define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */ 82 #define CMD_ASE (1<<5) /* async schedule enable */ 83 #define CMD_PSE (1<<4) /* periodic schedule enable */ 84 /* 3:2 is periodic frame list size */ 85 #define CMD_RESET (1<<1) /* reset HC not bus */ 86 #define CMD_RUN (1<<0) /* start/stop HC */ 87 88 /* USBSTS: offset 0x04 */ 89 u32 status; 90 #define STS_PPCE_MASK (0xff<<16) /* Per-Port change event 1-16 */ 91 #define STS_ASS (1<<15) /* Async Schedule Status */ 92 #define STS_PSS (1<<14) /* Periodic Schedule Status */ 93 #define STS_RECL (1<<13) /* Reclamation */ 94 #define STS_HALT (1<<12) /* Not running (any reason) */ 95 /* some bits reserved */ 96 /* these STS_* flags are also intr_enable bits (USBINTR) */ 97 #define STS_IAA (1<<5) /* Interrupted on async advance */ 98 #define STS_FATAL (1<<4) /* such as some PCI access errors */ 99 #define STS_FLR (1<<3) /* frame list rolled over */ 100 #define STS_PCD (1<<2) /* port change detect */ 101 #define STS_ERR (1<<1) /* "error" completion (overflow, ...) */ 102 #define STS_INT (1<<0) /* "normal" completion (short, ...) */ 103 104 /* USBINTR: offset 0x08 */ 105 u32 intr_enable; 106 107 /* FRINDEX: offset 0x0C */ 108 u32 frame_index; /* current microframe number */ 109 /* CTRLDSSEGMENT: offset 0x10 */ 110 u32 segment; /* address bits 63:32 if needed */ 111 /* PERIODICLISTBASE: offset 0x14 */ 112 u32 frame_list; /* points to periodic list */ 113 /* ASYNCLISTADDR: offset 0x18 */ 114 u32 async_next; /* address of next async queue head */ 115 116 u32 reserved1[2]; 117 118 /* TXFILLTUNING: offset 0x24 */ 119 u32 txfill_tuning; /* TX FIFO Tuning register */ 120 #define TXFIFO_DEFAULT (8<<16) /* FIFO burst threshold 8 */ 121 122 u32 reserved2[6]; 123 124 /* CONFIGFLAG: offset 0x40 */ 125 u32 configured_flag; 126 #define FLAG_CF (1<<0) /* true: we'll support "high speed" */ 127 128 /* PORTSC: offset 0x44 */ 129 u32 port_status[0]; /* up to N_PORTS */ 130 /* EHCI 1.1 addendum */ 131 #define PORTSC_SUSPEND_STS_ACK 0 132 #define PORTSC_SUSPEND_STS_NYET 1 133 #define PORTSC_SUSPEND_STS_STALL 2 134 #define PORTSC_SUSPEND_STS_ERR 3 135 136 #define PORT_DEV_ADDR (0x7f<<25) /* device address */ 137 #define PORT_SSTS (0x3<<23) /* suspend status */ 138 /* 31:23 reserved */ 139 #define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */ 140 #define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */ 141 #define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */ 142 /* 19:16 for port testing */ 143 #define PORT_TEST(x) (((x)&0xf)<<16) /* Port Test Control */ 144 #define PORT_TEST_PKT PORT_TEST(0x4) /* Port Test Control - packet test */ 145 #define PORT_TEST_FORCE PORT_TEST(0x5) /* Port Test Control - force enable */ 146 #define PORT_LED_OFF (0<<14) 147 #define PORT_LED_AMBER (1<<14) 148 #define PORT_LED_GREEN (2<<14) 149 #define PORT_LED_MASK (3<<14) 150 #define PORT_OWNER (1<<13) /* true: companion hc owns this port */ 151 #define PORT_POWER (1<<12) /* true: has power (see PPC) */ 152 #define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */ 153 /* 11:10 for detecting lowspeed devices (reset vs release ownership) */ 154 /* 9 reserved */ 155 #define PORT_LPM (1<<9) /* LPM transaction */ 156 #define PORT_RESET (1<<8) /* reset port */ 157 #define PORT_SUSPEND (1<<7) /* suspend port */ 158 #define PORT_RESUME (1<<6) /* resume it */ 159 #define PORT_OCC (1<<5) /* over current change */ 160 #define PORT_OC (1<<4) /* over current active */ 161 #define PORT_PEC (1<<3) /* port enable change */ 162 #define PORT_PE (1<<2) /* port enable */ 163 #define PORT_CSC (1<<1) /* connect status change */ 164 #define PORT_CONNECT (1<<0) /* device connected */ 165 #define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) 166 167 u32 reserved3[9]; 168 169 /* USBMODE: offset 0x68 */ 170 u32 usbmode; /* USB Device mode */ 171 #define USBMODE_SDIS (1<<3) /* Stream disable */ 172 #define USBMODE_BE (1<<2) /* BE/LE endianness select */ 173 #define USBMODE_CM_HC (3<<0) /* host controller mode */ 174 #define USBMODE_CM_IDLE (0<<0) /* idle state */ 175 176 u32 reserved4[6]; 177 178 /* Moorestown has some non-standard registers, partially due to the fact that 179 * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to 180 * PORTSCx 181 */ 182 /* HOSTPC: offset 0x84 */ 183 u32 hostpc[1]; /* HOSTPC extension */ 184 #define HOSTPC_PHCD (1<<22) /* Phy clock disable */ 185 #define HOSTPC_PSPD (3<<25) /* Port speed detection */ 186 187 u32 reserved5[16]; 188 189 /* USBMODE_EX: offset 0xc8 */ 190 u32 usbmode_ex; /* USB Device mode extension */ 191 #define USBMODE_EX_VBPS (1<<5) /* VBus Power Select On */ 192 #define USBMODE_EX_HC (3<<0) /* host controller mode */ 193 }; 194 195 #endif /* __LINUX_USB_EHCI_DEF_H */ 196