1 #ifndef LINUX_SSB_H_ 2 #define LINUX_SSB_H_ 3 4 #include <linux/device.h> 5 #include <linux/list.h> 6 #include <linux/types.h> 7 #include <linux/spinlock.h> 8 #include <linux/pci.h> 9 #include <linux/gpio.h> 10 #include <linux/mod_devicetable.h> 11 #include <linux/dma-mapping.h> 12 #include <linux/platform_device.h> 13 14 #include <linux/ssb/ssb_regs.h> 15 16 17 struct pcmcia_device; 18 struct ssb_bus; 19 struct ssb_driver; 20 21 struct ssb_sprom_core_pwr_info { 22 u8 itssi_2g, itssi_5g; 23 u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; 24 u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4]; 25 }; 26 27 struct ssb_sprom { 28 u8 revision; 29 u8 il0mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11b/g */ 30 u8 et0mac[6] __aligned(sizeof(u16)); /* MAC address for Ethernet */ 31 u8 et1mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11a */ 32 u8 et2mac[6] __aligned(sizeof(u16)); /* MAC address for extra Ethernet */ 33 u8 et0phyaddr; /* MII address for enet0 */ 34 u8 et1phyaddr; /* MII address for enet1 */ 35 u8 et2phyaddr; /* MII address for enet2 */ 36 u8 et0mdcport; /* MDIO for enet0 */ 37 u8 et1mdcport; /* MDIO for enet1 */ 38 u8 et2mdcport; /* MDIO for enet2 */ 39 u16 dev_id; /* Device ID overriding e.g. PCI ID */ 40 u16 board_rev; /* Board revision number from SPROM. */ 41 u16 board_num; /* Board number from SPROM. */ 42 u16 board_type; /* Board type from SPROM. */ 43 u8 country_code; /* Country Code */ 44 char alpha2[2]; /* Country Code as two chars like EU or US */ 45 u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ 46 u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ 47 u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ 48 u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ 49 u16 pa0b0; 50 u16 pa0b1; 51 u16 pa0b2; 52 u16 pa1b0; 53 u16 pa1b1; 54 u16 pa1b2; 55 u16 pa1lob0; 56 u16 pa1lob1; 57 u16 pa1lob2; 58 u16 pa1hib0; 59 u16 pa1hib1; 60 u16 pa1hib2; 61 u8 gpio0; /* GPIO pin 0 */ 62 u8 gpio1; /* GPIO pin 1 */ 63 u8 gpio2; /* GPIO pin 2 */ 64 u8 gpio3; /* GPIO pin 3 */ 65 u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ 66 u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ 67 u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ 68 u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ 69 u8 itssi_a; /* Idle TSSI Target for A-PHY */ 70 u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ 71 u8 tri2g; /* 2.4GHz TX isolation */ 72 u8 tri5gl; /* 5.2GHz TX isolation */ 73 u8 tri5g; /* 5.3GHz TX isolation */ 74 u8 tri5gh; /* 5.8GHz TX isolation */ 75 u8 txpid2g[4]; /* 2GHz TX power index */ 76 u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ 77 u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ 78 u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ 79 s8 rxpo2g; /* 2GHz RX power offset */ 80 s8 rxpo5g; /* 5GHz RX power offset */ 81 u8 rssisav2g; /* 2GHz RSSI params */ 82 u8 rssismc2g; 83 u8 rssismf2g; 84 u8 bxa2g; /* 2GHz BX arch */ 85 u8 rssisav5g; /* 5GHz RSSI params */ 86 u8 rssismc5g; 87 u8 rssismf5g; 88 u8 bxa5g; /* 5GHz BX arch */ 89 u16 cck2gpo; /* CCK power offset */ 90 u32 ofdm2gpo; /* 2.4GHz OFDM power offset */ 91 u32 ofdm5glpo; /* 5.2GHz OFDM power offset */ 92 u32 ofdm5gpo; /* 5.3GHz OFDM power offset */ 93 u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */ 94 u32 boardflags; 95 u32 boardflags2; 96 u32 boardflags3; 97 /* TODO: Switch all drivers to new u32 fields and drop below ones */ 98 u16 boardflags_lo; /* Board flags (bits 0-15) */ 99 u16 boardflags_hi; /* Board flags (bits 16-31) */ 100 u16 boardflags2_lo; /* Board flags (bits 32-47) */ 101 u16 boardflags2_hi; /* Board flags (bits 48-63) */ 102 103 struct ssb_sprom_core_pwr_info core_pwr_info[4]; 104 105 /* Antenna gain values for up to 4 antennas 106 * on each band. Values in dBm/4 (Q5.2). Negative gain means the 107 * loss in the connectors is bigger than the gain. */ 108 struct { 109 s8 a0, a1, a2, a3; 110 } antenna_gain; 111 112 struct { 113 struct { 114 u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; 115 } ghz2; 116 struct { 117 u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; 118 } ghz5; 119 } fem; 120 121 u16 mcs2gpo[8]; 122 u16 mcs5gpo[8]; 123 u16 mcs5glpo[8]; 124 u16 mcs5ghpo[8]; 125 u8 opo; 126 127 u8 rxgainerr2ga[3]; 128 u8 rxgainerr5gla[3]; 129 u8 rxgainerr5gma[3]; 130 u8 rxgainerr5gha[3]; 131 u8 rxgainerr5gua[3]; 132 133 u8 noiselvl2ga[3]; 134 u8 noiselvl5gla[3]; 135 u8 noiselvl5gma[3]; 136 u8 noiselvl5gha[3]; 137 u8 noiselvl5gua[3]; 138 139 u8 regrev; 140 u8 txchain; 141 u8 rxchain; 142 u8 antswitch; 143 u16 cddpo; 144 u16 stbcpo; 145 u16 bw40po; 146 u16 bwduppo; 147 148 u8 tempthresh; 149 u8 tempoffset; 150 u16 rawtempsense; 151 u8 measpower; 152 u8 tempsense_slope; 153 u8 tempcorrx; 154 u8 tempsense_option; 155 u8 freqoffset_corr; 156 u8 iqcal_swp_dis; 157 u8 hw_iqcal_en; 158 u8 elna2g; 159 u8 elna5g; 160 u8 phycal_tempdelta; 161 u8 temps_period; 162 u8 temps_hysteresis; 163 u8 measpower1; 164 u8 measpower2; 165 u8 pcieingress_war; 166 167 /* power per rate from sromrev 9 */ 168 u16 cckbw202gpo; 169 u16 cckbw20ul2gpo; 170 u32 legofdmbw202gpo; 171 u32 legofdmbw20ul2gpo; 172 u32 legofdmbw205glpo; 173 u32 legofdmbw20ul5glpo; 174 u32 legofdmbw205gmpo; 175 u32 legofdmbw20ul5gmpo; 176 u32 legofdmbw205ghpo; 177 u32 legofdmbw20ul5ghpo; 178 u32 mcsbw202gpo; 179 u32 mcsbw20ul2gpo; 180 u32 mcsbw402gpo; 181 u32 mcsbw205glpo; 182 u32 mcsbw20ul5glpo; 183 u32 mcsbw405glpo; 184 u32 mcsbw205gmpo; 185 u32 mcsbw20ul5gmpo; 186 u32 mcsbw405gmpo; 187 u32 mcsbw205ghpo; 188 u32 mcsbw20ul5ghpo; 189 u32 mcsbw405ghpo; 190 u16 mcs32po; 191 u16 legofdm40duppo; 192 u8 sar2g; 193 u8 sar5g; 194 }; 195 196 /* Information about the PCB the circuitry is soldered on. */ 197 struct ssb_boardinfo { 198 u16 vendor; 199 u16 type; 200 }; 201 202 203 struct ssb_device; 204 /* Lowlevel read/write operations on the device MMIO. 205 * Internal, don't use that outside of ssb. */ 206 struct ssb_bus_ops { 207 u8 (*read8)(struct ssb_device *dev, u16 offset); 208 u16 (*read16)(struct ssb_device *dev, u16 offset); 209 u32 (*read32)(struct ssb_device *dev, u16 offset); 210 void (*write8)(struct ssb_device *dev, u16 offset, u8 value); 211 void (*write16)(struct ssb_device *dev, u16 offset, u16 value); 212 void (*write32)(struct ssb_device *dev, u16 offset, u32 value); 213 #ifdef CONFIG_SSB_BLOCKIO 214 void (*block_read)(struct ssb_device *dev, void *buffer, 215 size_t count, u16 offset, u8 reg_width); 216 void (*block_write)(struct ssb_device *dev, const void *buffer, 217 size_t count, u16 offset, u8 reg_width); 218 #endif 219 }; 220 221 222 /* Core-ID values. */ 223 #define SSB_DEV_CHIPCOMMON 0x800 224 #define SSB_DEV_ILINE20 0x801 225 #define SSB_DEV_SDRAM 0x803 226 #define SSB_DEV_PCI 0x804 227 #define SSB_DEV_MIPS 0x805 228 #define SSB_DEV_ETHERNET 0x806 229 #define SSB_DEV_V90 0x807 230 #define SSB_DEV_USB11_HOSTDEV 0x808 231 #define SSB_DEV_ADSL 0x809 232 #define SSB_DEV_ILINE100 0x80A 233 #define SSB_DEV_IPSEC 0x80B 234 #define SSB_DEV_PCMCIA 0x80D 235 #define SSB_DEV_INTERNAL_MEM 0x80E 236 #define SSB_DEV_MEMC_SDRAM 0x80F 237 #define SSB_DEV_EXTIF 0x811 238 #define SSB_DEV_80211 0x812 239 #define SSB_DEV_MIPS_3302 0x816 240 #define SSB_DEV_USB11_HOST 0x817 241 #define SSB_DEV_USB11_DEV 0x818 242 #define SSB_DEV_USB20_HOST 0x819 243 #define SSB_DEV_USB20_DEV 0x81A 244 #define SSB_DEV_SDIO_HOST 0x81B 245 #define SSB_DEV_ROBOSWITCH 0x81C 246 #define SSB_DEV_PARA_ATA 0x81D 247 #define SSB_DEV_SATA_XORDMA 0x81E 248 #define SSB_DEV_ETHERNET_GBIT 0x81F 249 #define SSB_DEV_PCIE 0x820 250 #define SSB_DEV_MIMO_PHY 0x821 251 #define SSB_DEV_SRAM_CTRLR 0x822 252 #define SSB_DEV_MINI_MACPHY 0x823 253 #define SSB_DEV_ARM_1176 0x824 254 #define SSB_DEV_ARM_7TDMI 0x825 255 #define SSB_DEV_ARM_CM3 0x82A 256 257 /* Vendor-ID values */ 258 #define SSB_VENDOR_BROADCOM 0x4243 259 260 /* Some kernel subsystems poke with dev->drvdata, so we must use the 261 * following ugly workaround to get from struct device to struct ssb_device */ 262 struct __ssb_dev_wrapper { 263 struct device dev; 264 struct ssb_device *sdev; 265 }; 266 267 struct ssb_device { 268 /* Having a copy of the ops pointer in each dev struct 269 * is an optimization. */ 270 const struct ssb_bus_ops *ops; 271 272 struct device *dev, *dma_dev; 273 274 struct ssb_bus *bus; 275 struct ssb_device_id id; 276 277 u8 core_index; 278 unsigned int irq; 279 280 /* Internal-only stuff follows. */ 281 void *drvdata; /* Per-device data */ 282 void *devtypedata; /* Per-devicetype (eg 802.11) data */ 283 }; 284 285 /* Go from struct device to struct ssb_device. */ 286 static inline 287 struct ssb_device * dev_to_ssb_dev(struct device *dev) 288 { 289 struct __ssb_dev_wrapper *wrap; 290 wrap = container_of(dev, struct __ssb_dev_wrapper, dev); 291 return wrap->sdev; 292 } 293 294 /* Device specific user data */ 295 static inline 296 void ssb_set_drvdata(struct ssb_device *dev, void *data) 297 { 298 dev->drvdata = data; 299 } 300 static inline 301 void * ssb_get_drvdata(struct ssb_device *dev) 302 { 303 return dev->drvdata; 304 } 305 306 /* Devicetype specific user data. This is per device-type (not per device) */ 307 void ssb_set_devtypedata(struct ssb_device *dev, void *data); 308 static inline 309 void * ssb_get_devtypedata(struct ssb_device *dev) 310 { 311 return dev->devtypedata; 312 } 313 314 315 struct ssb_driver { 316 const char *name; 317 const struct ssb_device_id *id_table; 318 319 int (*probe)(struct ssb_device *dev, const struct ssb_device_id *id); 320 void (*remove)(struct ssb_device *dev); 321 int (*suspend)(struct ssb_device *dev, pm_message_t state); 322 int (*resume)(struct ssb_device *dev); 323 void (*shutdown)(struct ssb_device *dev); 324 325 struct device_driver drv; 326 }; 327 #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) 328 329 extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); 330 #define ssb_driver_register(drv) \ 331 __ssb_driver_register(drv, THIS_MODULE) 332 333 extern void ssb_driver_unregister(struct ssb_driver *drv); 334 335 336 337 338 enum ssb_bustype { 339 SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */ 340 SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */ 341 SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */ 342 SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */ 343 }; 344 345 /* board_vendor */ 346 #define SSB_BOARDVENDOR_BCM 0x14E4 /* Broadcom */ 347 #define SSB_BOARDVENDOR_DELL 0x1028 /* Dell */ 348 #define SSB_BOARDVENDOR_HP 0x0E11 /* HP */ 349 /* board_type */ 350 #define SSB_BOARD_BCM94301CB 0x0406 351 #define SSB_BOARD_BCM94301MP 0x0407 352 #define SSB_BOARD_BU4309 0x040A 353 #define SSB_BOARD_BCM94309CB 0x040B 354 #define SSB_BOARD_BCM4309MP 0x040C 355 #define SSB_BOARD_BU4306 0x0416 356 #define SSB_BOARD_BCM94306MP 0x0418 357 #define SSB_BOARD_BCM4309G 0x0421 358 #define SSB_BOARD_BCM4306CB 0x0417 359 #define SSB_BOARD_BCM94306PC 0x0425 /* pcmcia 3.3v 4306 card */ 360 #define SSB_BOARD_BCM94306CBSG 0x042B /* with SiGe PA */ 361 #define SSB_BOARD_PCSG94306 0x042D /* with SiGe PA */ 362 #define SSB_BOARD_BU4704SD 0x042E /* with sdram */ 363 #define SSB_BOARD_BCM94704AGR 0x042F /* dual 11a/11g Router */ 364 #define SSB_BOARD_BCM94308MP 0x0430 /* 11a-only minipci */ 365 #define SSB_BOARD_BU4318 0x0447 366 #define SSB_BOARD_CB4318 0x0448 367 #define SSB_BOARD_MPG4318 0x0449 368 #define SSB_BOARD_MP4318 0x044A 369 #define SSB_BOARD_SD4318 0x044B 370 #define SSB_BOARD_BCM94306P 0x044C /* with SiGe */ 371 #define SSB_BOARD_BCM94303MP 0x044E 372 #define SSB_BOARD_BCM94306MPM 0x0450 373 #define SSB_BOARD_BCM94306MPL 0x0453 374 #define SSB_BOARD_PC4303 0x0454 /* pcmcia */ 375 #define SSB_BOARD_BCM94306MPLNA 0x0457 376 #define SSB_BOARD_BCM94306MPH 0x045B 377 #define SSB_BOARD_BCM94306PCIV 0x045C 378 #define SSB_BOARD_BCM94318MPGH 0x0463 379 #define SSB_BOARD_BU4311 0x0464 380 #define SSB_BOARD_BCM94311MC 0x0465 381 #define SSB_BOARD_BCM94311MCAG 0x0466 382 /* 4321 boards */ 383 #define SSB_BOARD_BU4321 0x046B 384 #define SSB_BOARD_BU4321E 0x047C 385 #define SSB_BOARD_MP4321 0x046C 386 #define SSB_BOARD_CB2_4321 0x046D 387 #define SSB_BOARD_CB2_4321_AG 0x0066 388 #define SSB_BOARD_MC4321 0x046E 389 /* 4325 boards */ 390 #define SSB_BOARD_BCM94325DEVBU 0x0490 391 #define SSB_BOARD_BCM94325BGABU 0x0491 392 #define SSB_BOARD_BCM94325SDGWB 0x0492 393 #define SSB_BOARD_BCM94325SDGMDL 0x04AA 394 #define SSB_BOARD_BCM94325SDGMDL2 0x04C6 395 #define SSB_BOARD_BCM94325SDGMDL3 0x04C9 396 #define SSB_BOARD_BCM94325SDABGWBA 0x04E1 397 /* 4322 boards */ 398 #define SSB_BOARD_BCM94322MC 0x04A4 399 #define SSB_BOARD_BCM94322USB 0x04A8 /* dualband */ 400 #define SSB_BOARD_BCM94322HM 0x04B0 401 #define SSB_BOARD_BCM94322USB2D 0x04Bf /* single band discrete front end */ 402 /* 4312 boards */ 403 #define SSB_BOARD_BU4312 0x048A 404 #define SSB_BOARD_BCM4312MCGSG 0x04B5 405 /* chip_package */ 406 #define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */ 407 #define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */ 408 #define SSB_CHIPPACK_BCM4712L 0 /* Large 340pin 4712 */ 409 410 #include <linux/ssb/ssb_driver_chipcommon.h> 411 #include <linux/ssb/ssb_driver_mips.h> 412 #include <linux/ssb/ssb_driver_extif.h> 413 #include <linux/ssb/ssb_driver_pci.h> 414 415 struct ssb_bus { 416 /* The MMIO area. */ 417 void __iomem *mmio; 418 419 const struct ssb_bus_ops *ops; 420 421 /* The core currently mapped into the MMIO window. 422 * Not valid on all host-buses. So don't use outside of SSB. */ 423 struct ssb_device *mapped_device; 424 union { 425 /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ 426 u8 mapped_pcmcia_seg; 427 /* Current SSB base address window for SDIO. */ 428 u32 sdio_sbaddr; 429 }; 430 /* Lock for core and segment switching. 431 * On PCMCIA-host busses this is used to protect the whole MMIO access. */ 432 spinlock_t bar_lock; 433 434 /* The host-bus this backplane is running on. */ 435 enum ssb_bustype bustype; 436 /* Pointers to the host-bus. Check bustype before using any of these pointers. */ 437 union { 438 /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */ 439 struct pci_dev *host_pci; 440 /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ 441 struct pcmcia_device *host_pcmcia; 442 /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */ 443 struct sdio_func *host_sdio; 444 }; 445 446 /* See enum ssb_quirks */ 447 unsigned int quirks; 448 449 #ifdef CONFIG_SSB_SPROM 450 /* Mutex to protect the SPROM writing. */ 451 struct mutex sprom_mutex; 452 #endif 453 454 /* ID information about the Chip. */ 455 u16 chip_id; 456 u8 chip_rev; 457 u16 sprom_offset; 458 u16 sprom_size; /* number of words in sprom */ 459 u8 chip_package; 460 461 /* List of devices (cores) on the backplane. */ 462 struct ssb_device devices[SSB_MAX_NR_CORES]; 463 u8 nr_devices; 464 465 /* Software ID number for this bus. */ 466 unsigned int busnumber; 467 468 /* The ChipCommon device (if available). */ 469 struct ssb_chipcommon chipco; 470 /* The PCI-core device (if available). */ 471 struct ssb_pcicore pcicore; 472 /* The MIPS-core device (if available). */ 473 struct ssb_mipscore mipscore; 474 /* The EXTif-core device (if available). */ 475 struct ssb_extif extif; 476 477 /* The following structure elements are not available in early 478 * SSB initialization. Though, they are available for regular 479 * registered drivers at any stage. So be careful when 480 * using them in the ssb core code. */ 481 482 /* ID information about the PCB. */ 483 struct ssb_boardinfo boardinfo; 484 /* Contents of the SPROM. */ 485 struct ssb_sprom sprom; 486 /* If the board has a cardbus slot, this is set to true. */ 487 bool has_cardbus_slot; 488 489 #ifdef CONFIG_SSB_EMBEDDED 490 /* Lock for GPIO register access. */ 491 spinlock_t gpio_lock; 492 struct platform_device *watchdog; 493 #endif /* EMBEDDED */ 494 #ifdef CONFIG_SSB_DRIVER_GPIO 495 struct gpio_chip gpio; 496 struct irq_domain *irq_domain; 497 #endif /* DRIVER_GPIO */ 498 499 /* Internal-only stuff follows. Do not touch. */ 500 struct list_head list; 501 #ifdef CONFIG_SSB_DEBUG 502 /* Is the bus already powered up? */ 503 bool powered_up; 504 int power_warn_count; 505 #endif /* DEBUG */ 506 }; 507 508 enum ssb_quirks { 509 /* SDIO connected card requires performing a read after writing a 32-bit value */ 510 SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0), 511 }; 512 513 /* The initialization-invariants. */ 514 struct ssb_init_invariants { 515 /* Versioning information about the PCB. */ 516 struct ssb_boardinfo boardinfo; 517 /* The SPROM information. That's either stored in an 518 * EEPROM or NVRAM on the board. */ 519 struct ssb_sprom sprom; 520 /* If the board has a cardbus slot, this is set to true. */ 521 bool has_cardbus_slot; 522 }; 523 /* Type of function to fetch the invariants. */ 524 typedef int (*ssb_invariants_func_t)(struct ssb_bus *bus, 525 struct ssb_init_invariants *iv); 526 527 /* Register SoC bus. */ 528 extern int ssb_bus_host_soc_register(struct ssb_bus *bus, 529 unsigned long baseaddr); 530 #ifdef CONFIG_SSB_PCIHOST 531 extern int ssb_bus_pcibus_register(struct ssb_bus *bus, 532 struct pci_dev *host_pci); 533 #endif /* CONFIG_SSB_PCIHOST */ 534 #ifdef CONFIG_SSB_PCMCIAHOST 535 extern int ssb_bus_pcmciabus_register(struct ssb_bus *bus, 536 struct pcmcia_device *pcmcia_dev, 537 unsigned long baseaddr); 538 #endif /* CONFIG_SSB_PCMCIAHOST */ 539 #ifdef CONFIG_SSB_SDIOHOST 540 extern int ssb_bus_sdiobus_register(struct ssb_bus *bus, 541 struct sdio_func *sdio_func, 542 unsigned int quirks); 543 #endif /* CONFIG_SSB_SDIOHOST */ 544 545 546 extern void ssb_bus_unregister(struct ssb_bus *bus); 547 548 /* Does the device have an SPROM? */ 549 extern bool ssb_is_sprom_available(struct ssb_bus *bus); 550 551 /* Set a fallback SPROM. 552 * See kdoc at the function definition for complete documentation. */ 553 extern int ssb_arch_register_fallback_sprom( 554 int (*sprom_callback)(struct ssb_bus *bus, 555 struct ssb_sprom *out)); 556 557 /* Suspend a SSB bus. 558 * Call this from the parent bus suspend routine. */ 559 extern int ssb_bus_suspend(struct ssb_bus *bus); 560 /* Resume a SSB bus. 561 * Call this from the parent bus resume routine. */ 562 extern int ssb_bus_resume(struct ssb_bus *bus); 563 564 extern u32 ssb_clockspeed(struct ssb_bus *bus); 565 566 /* Is the device enabled in hardware? */ 567 int ssb_device_is_enabled(struct ssb_device *dev); 568 /* Enable a device and pass device-specific SSB_TMSLOW flags. 569 * If no device-specific flags are available, use 0. */ 570 void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags); 571 /* Disable a device in hardware and pass SSB_TMSLOW flags (if any). */ 572 void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags); 573 574 575 /* Device MMIO register read/write functions. */ 576 static inline u8 ssb_read8(struct ssb_device *dev, u16 offset) 577 { 578 return dev->ops->read8(dev, offset); 579 } 580 static inline u16 ssb_read16(struct ssb_device *dev, u16 offset) 581 { 582 return dev->ops->read16(dev, offset); 583 } 584 static inline u32 ssb_read32(struct ssb_device *dev, u16 offset) 585 { 586 return dev->ops->read32(dev, offset); 587 } 588 static inline void ssb_write8(struct ssb_device *dev, u16 offset, u8 value) 589 { 590 dev->ops->write8(dev, offset, value); 591 } 592 static inline void ssb_write16(struct ssb_device *dev, u16 offset, u16 value) 593 { 594 dev->ops->write16(dev, offset, value); 595 } 596 static inline void ssb_write32(struct ssb_device *dev, u16 offset, u32 value) 597 { 598 dev->ops->write32(dev, offset, value); 599 } 600 #ifdef CONFIG_SSB_BLOCKIO 601 static inline void ssb_block_read(struct ssb_device *dev, void *buffer, 602 size_t count, u16 offset, u8 reg_width) 603 { 604 dev->ops->block_read(dev, buffer, count, offset, reg_width); 605 } 606 607 static inline void ssb_block_write(struct ssb_device *dev, const void *buffer, 608 size_t count, u16 offset, u8 reg_width) 609 { 610 dev->ops->block_write(dev, buffer, count, offset, reg_width); 611 } 612 #endif /* CONFIG_SSB_BLOCKIO */ 613 614 615 /* The SSB DMA API. Use this API for any DMA operation on the device. 616 * This API basically is a wrapper that calls the correct DMA API for 617 * the host device type the SSB device is attached to. */ 618 619 /* Translation (routing) bits that need to be ORed to DMA 620 * addresses before they are given to a device. */ 621 extern u32 ssb_dma_translation(struct ssb_device *dev); 622 #define SSB_DMA_TRANSLATION_MASK 0xC0000000 623 #define SSB_DMA_TRANSLATION_SHIFT 30 624 625 static inline void __cold __ssb_dma_not_implemented(struct ssb_device *dev) 626 { 627 #ifdef CONFIG_SSB_DEBUG 628 printk(KERN_ERR "SSB: BUG! Calling DMA API for " 629 "unsupported bustype %d\n", dev->bus->bustype); 630 #endif /* DEBUG */ 631 } 632 633 #ifdef CONFIG_SSB_PCIHOST 634 /* PCI-host wrapper driver */ 635 extern int ssb_pcihost_register(struct pci_driver *driver); 636 static inline void ssb_pcihost_unregister(struct pci_driver *driver) 637 { 638 pci_unregister_driver(driver); 639 } 640 641 static inline 642 void ssb_pcihost_set_power_state(struct ssb_device *sdev, pci_power_t state) 643 { 644 if (sdev->bus->bustype == SSB_BUSTYPE_PCI) 645 pci_set_power_state(sdev->bus->host_pci, state); 646 } 647 #else 648 static inline void ssb_pcihost_unregister(struct pci_driver *driver) 649 { 650 } 651 652 static inline 653 void ssb_pcihost_set_power_state(struct ssb_device *sdev, pci_power_t state) 654 { 655 } 656 #endif /* CONFIG_SSB_PCIHOST */ 657 658 659 /* If a driver is shutdown or suspended, call this to signal 660 * that the bus may be completely powered down. SSB will decide, 661 * if it's really time to power down the bus, based on if there 662 * are other devices that want to run. */ 663 extern int ssb_bus_may_powerdown(struct ssb_bus *bus); 664 /* Before initializing and enabling a device, call this to power-up the bus. 665 * If you want to allow use of dynamic-power-control, pass the flag. 666 * Otherwise static always-on powercontrol will be used. */ 667 extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); 668 669 extern void ssb_commit_settings(struct ssb_bus *bus); 670 671 /* Various helper functions */ 672 extern u32 ssb_admatch_base(u32 adm); 673 extern u32 ssb_admatch_size(u32 adm); 674 675 /* PCI device mapping and fixup routines. 676 * Called from the architecture pcibios init code. 677 * These are only available on SSB_EMBEDDED configurations. */ 678 #ifdef CONFIG_SSB_EMBEDDED 679 int ssb_pcibios_plat_dev_init(struct pci_dev *dev); 680 int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); 681 #endif /* CONFIG_SSB_EMBEDDED */ 682 683 #endif /* LINUX_SSB_H_ */ 684