1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef LINUX_SSB_H_ 3 #define LINUX_SSB_H_ 4 5 #include <linux/device.h> 6 #include <linux/list.h> 7 #include <linux/types.h> 8 #include <linux/spinlock.h> 9 #include <linux/pci.h> 10 #include <linux/gpio.h> 11 #include <linux/mod_devicetable.h> 12 #include <linux/dma-mapping.h> 13 #include <linux/platform_device.h> 14 15 #include <linux/ssb/ssb_regs.h> 16 17 18 struct pcmcia_device; 19 struct ssb_bus; 20 struct ssb_driver; 21 22 struct ssb_sprom_core_pwr_info { 23 u8 itssi_2g, itssi_5g; 24 u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; 25 u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4]; 26 }; 27 28 struct ssb_sprom { 29 u8 revision; 30 u8 il0mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11b/g */ 31 u8 et0mac[6] __aligned(sizeof(u16)); /* MAC address for Ethernet */ 32 u8 et1mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11a */ 33 u8 et2mac[6] __aligned(sizeof(u16)); /* MAC address for extra Ethernet */ 34 u8 et0phyaddr; /* MII address for enet0 */ 35 u8 et1phyaddr; /* MII address for enet1 */ 36 u8 et2phyaddr; /* MII address for enet2 */ 37 u8 et0mdcport; /* MDIO for enet0 */ 38 u8 et1mdcport; /* MDIO for enet1 */ 39 u8 et2mdcport; /* MDIO for enet2 */ 40 u16 dev_id; /* Device ID overriding e.g. PCI ID */ 41 u16 board_rev; /* Board revision number from SPROM. */ 42 u16 board_num; /* Board number from SPROM. */ 43 u16 board_type; /* Board type from SPROM. */ 44 u8 country_code; /* Country Code */ 45 char alpha2[2]; /* Country Code as two chars like EU or US */ 46 u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ 47 u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ 48 u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ 49 u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ 50 u16 pa0b0; 51 u16 pa0b1; 52 u16 pa0b2; 53 u16 pa1b0; 54 u16 pa1b1; 55 u16 pa1b2; 56 u16 pa1lob0; 57 u16 pa1lob1; 58 u16 pa1lob2; 59 u16 pa1hib0; 60 u16 pa1hib1; 61 u16 pa1hib2; 62 u8 gpio0; /* GPIO pin 0 */ 63 u8 gpio1; /* GPIO pin 1 */ 64 u8 gpio2; /* GPIO pin 2 */ 65 u8 gpio3; /* GPIO pin 3 */ 66 u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ 67 u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ 68 u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ 69 u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ 70 u8 itssi_a; /* Idle TSSI Target for A-PHY */ 71 u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ 72 u8 tri2g; /* 2.4GHz TX isolation */ 73 u8 tri5gl; /* 5.2GHz TX isolation */ 74 u8 tri5g; /* 5.3GHz TX isolation */ 75 u8 tri5gh; /* 5.8GHz TX isolation */ 76 u8 txpid2g[4]; /* 2GHz TX power index */ 77 u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ 78 u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ 79 u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ 80 s8 rxpo2g; /* 2GHz RX power offset */ 81 s8 rxpo5g; /* 5GHz RX power offset */ 82 u8 rssisav2g; /* 2GHz RSSI params */ 83 u8 rssismc2g; 84 u8 rssismf2g; 85 u8 bxa2g; /* 2GHz BX arch */ 86 u8 rssisav5g; /* 5GHz RSSI params */ 87 u8 rssismc5g; 88 u8 rssismf5g; 89 u8 bxa5g; /* 5GHz BX arch */ 90 u16 cck2gpo; /* CCK power offset */ 91 u32 ofdm2gpo; /* 2.4GHz OFDM power offset */ 92 u32 ofdm5glpo; /* 5.2GHz OFDM power offset */ 93 u32 ofdm5gpo; /* 5.3GHz OFDM power offset */ 94 u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */ 95 u32 boardflags; 96 u32 boardflags2; 97 u32 boardflags3; 98 /* TODO: Switch all drivers to new u32 fields and drop below ones */ 99 u16 boardflags_lo; /* Board flags (bits 0-15) */ 100 u16 boardflags_hi; /* Board flags (bits 16-31) */ 101 u16 boardflags2_lo; /* Board flags (bits 32-47) */ 102 u16 boardflags2_hi; /* Board flags (bits 48-63) */ 103 104 struct ssb_sprom_core_pwr_info core_pwr_info[4]; 105 106 /* Antenna gain values for up to 4 antennas 107 * on each band. Values in dBm/4 (Q5.2). Negative gain means the 108 * loss in the connectors is bigger than the gain. */ 109 struct { 110 s8 a0, a1, a2, a3; 111 } antenna_gain; 112 113 struct { 114 struct { 115 u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; 116 } ghz2; 117 struct { 118 u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; 119 } ghz5; 120 } fem; 121 122 u16 mcs2gpo[8]; 123 u16 mcs5gpo[8]; 124 u16 mcs5glpo[8]; 125 u16 mcs5ghpo[8]; 126 u8 opo; 127 128 u8 rxgainerr2ga[3]; 129 u8 rxgainerr5gla[3]; 130 u8 rxgainerr5gma[3]; 131 u8 rxgainerr5gha[3]; 132 u8 rxgainerr5gua[3]; 133 134 u8 noiselvl2ga[3]; 135 u8 noiselvl5gla[3]; 136 u8 noiselvl5gma[3]; 137 u8 noiselvl5gha[3]; 138 u8 noiselvl5gua[3]; 139 140 u8 regrev; 141 u8 txchain; 142 u8 rxchain; 143 u8 antswitch; 144 u16 cddpo; 145 u16 stbcpo; 146 u16 bw40po; 147 u16 bwduppo; 148 149 u8 tempthresh; 150 u8 tempoffset; 151 u16 rawtempsense; 152 u8 measpower; 153 u8 tempsense_slope; 154 u8 tempcorrx; 155 u8 tempsense_option; 156 u8 freqoffset_corr; 157 u8 iqcal_swp_dis; 158 u8 hw_iqcal_en; 159 u8 elna2g; 160 u8 elna5g; 161 u8 phycal_tempdelta; 162 u8 temps_period; 163 u8 temps_hysteresis; 164 u8 measpower1; 165 u8 measpower2; 166 u8 pcieingress_war; 167 168 /* power per rate from sromrev 9 */ 169 u16 cckbw202gpo; 170 u16 cckbw20ul2gpo; 171 u32 legofdmbw202gpo; 172 u32 legofdmbw20ul2gpo; 173 u32 legofdmbw205glpo; 174 u32 legofdmbw20ul5glpo; 175 u32 legofdmbw205gmpo; 176 u32 legofdmbw20ul5gmpo; 177 u32 legofdmbw205ghpo; 178 u32 legofdmbw20ul5ghpo; 179 u32 mcsbw202gpo; 180 u32 mcsbw20ul2gpo; 181 u32 mcsbw402gpo; 182 u32 mcsbw205glpo; 183 u32 mcsbw20ul5glpo; 184 u32 mcsbw405glpo; 185 u32 mcsbw205gmpo; 186 u32 mcsbw20ul5gmpo; 187 u32 mcsbw405gmpo; 188 u32 mcsbw205ghpo; 189 u32 mcsbw20ul5ghpo; 190 u32 mcsbw405ghpo; 191 u16 mcs32po; 192 u16 legofdm40duppo; 193 u8 sar2g; 194 u8 sar5g; 195 }; 196 197 /* Information about the PCB the circuitry is soldered on. */ 198 struct ssb_boardinfo { 199 u16 vendor; 200 u16 type; 201 }; 202 203 204 struct ssb_device; 205 /* Lowlevel read/write operations on the device MMIO. 206 * Internal, don't use that outside of ssb. */ 207 struct ssb_bus_ops { 208 u8 (*read8)(struct ssb_device *dev, u16 offset); 209 u16 (*read16)(struct ssb_device *dev, u16 offset); 210 u32 (*read32)(struct ssb_device *dev, u16 offset); 211 void (*write8)(struct ssb_device *dev, u16 offset, u8 value); 212 void (*write16)(struct ssb_device *dev, u16 offset, u16 value); 213 void (*write32)(struct ssb_device *dev, u16 offset, u32 value); 214 #ifdef CONFIG_SSB_BLOCKIO 215 void (*block_read)(struct ssb_device *dev, void *buffer, 216 size_t count, u16 offset, u8 reg_width); 217 void (*block_write)(struct ssb_device *dev, const void *buffer, 218 size_t count, u16 offset, u8 reg_width); 219 #endif 220 }; 221 222 223 /* Core-ID values. */ 224 #define SSB_DEV_CHIPCOMMON 0x800 225 #define SSB_DEV_ILINE20 0x801 226 #define SSB_DEV_SDRAM 0x803 227 #define SSB_DEV_PCI 0x804 228 #define SSB_DEV_MIPS 0x805 229 #define SSB_DEV_ETHERNET 0x806 230 #define SSB_DEV_V90 0x807 231 #define SSB_DEV_USB11_HOSTDEV 0x808 232 #define SSB_DEV_ADSL 0x809 233 #define SSB_DEV_ILINE100 0x80A 234 #define SSB_DEV_IPSEC 0x80B 235 #define SSB_DEV_PCMCIA 0x80D 236 #define SSB_DEV_INTERNAL_MEM 0x80E 237 #define SSB_DEV_MEMC_SDRAM 0x80F 238 #define SSB_DEV_EXTIF 0x811 239 #define SSB_DEV_80211 0x812 240 #define SSB_DEV_MIPS_3302 0x816 241 #define SSB_DEV_USB11_HOST 0x817 242 #define SSB_DEV_USB11_DEV 0x818 243 #define SSB_DEV_USB20_HOST 0x819 244 #define SSB_DEV_USB20_DEV 0x81A 245 #define SSB_DEV_SDIO_HOST 0x81B 246 #define SSB_DEV_ROBOSWITCH 0x81C 247 #define SSB_DEV_PARA_ATA 0x81D 248 #define SSB_DEV_SATA_XORDMA 0x81E 249 #define SSB_DEV_ETHERNET_GBIT 0x81F 250 #define SSB_DEV_PCIE 0x820 251 #define SSB_DEV_MIMO_PHY 0x821 252 #define SSB_DEV_SRAM_CTRLR 0x822 253 #define SSB_DEV_MINI_MACPHY 0x823 254 #define SSB_DEV_ARM_1176 0x824 255 #define SSB_DEV_ARM_7TDMI 0x825 256 #define SSB_DEV_ARM_CM3 0x82A 257 258 /* Vendor-ID values */ 259 #define SSB_VENDOR_BROADCOM 0x4243 260 261 /* Some kernel subsystems poke with dev->drvdata, so we must use the 262 * following ugly workaround to get from struct device to struct ssb_device */ 263 struct __ssb_dev_wrapper { 264 struct device dev; 265 struct ssb_device *sdev; 266 }; 267 268 struct ssb_device { 269 /* Having a copy of the ops pointer in each dev struct 270 * is an optimization. */ 271 const struct ssb_bus_ops *ops; 272 273 struct device *dev, *dma_dev; 274 275 struct ssb_bus *bus; 276 struct ssb_device_id id; 277 278 u8 core_index; 279 unsigned int irq; 280 281 /* Internal-only stuff follows. */ 282 void *drvdata; /* Per-device data */ 283 void *devtypedata; /* Per-devicetype (eg 802.11) data */ 284 }; 285 286 /* Go from struct device to struct ssb_device. */ 287 static inline 288 struct ssb_device * dev_to_ssb_dev(struct device *dev) 289 { 290 struct __ssb_dev_wrapper *wrap; 291 wrap = container_of(dev, struct __ssb_dev_wrapper, dev); 292 return wrap->sdev; 293 } 294 295 /* Device specific user data */ 296 static inline 297 void ssb_set_drvdata(struct ssb_device *dev, void *data) 298 { 299 dev->drvdata = data; 300 } 301 static inline 302 void * ssb_get_drvdata(struct ssb_device *dev) 303 { 304 return dev->drvdata; 305 } 306 307 /* Devicetype specific user data. This is per device-type (not per device) */ 308 void ssb_set_devtypedata(struct ssb_device *dev, void *data); 309 static inline 310 void * ssb_get_devtypedata(struct ssb_device *dev) 311 { 312 return dev->devtypedata; 313 } 314 315 316 struct ssb_driver { 317 const char *name; 318 const struct ssb_device_id *id_table; 319 320 int (*probe)(struct ssb_device *dev, const struct ssb_device_id *id); 321 void (*remove)(struct ssb_device *dev); 322 int (*suspend)(struct ssb_device *dev, pm_message_t state); 323 int (*resume)(struct ssb_device *dev); 324 void (*shutdown)(struct ssb_device *dev); 325 326 struct device_driver drv; 327 }; 328 #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) 329 330 extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); 331 #define ssb_driver_register(drv) \ 332 __ssb_driver_register(drv, THIS_MODULE) 333 334 extern void ssb_driver_unregister(struct ssb_driver *drv); 335 336 337 338 339 enum ssb_bustype { 340 SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */ 341 SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */ 342 SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */ 343 SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */ 344 }; 345 346 /* board_vendor */ 347 #define SSB_BOARDVENDOR_BCM 0x14E4 /* Broadcom */ 348 #define SSB_BOARDVENDOR_DELL 0x1028 /* Dell */ 349 #define SSB_BOARDVENDOR_HP 0x0E11 /* HP */ 350 /* board_type */ 351 #define SSB_BOARD_BCM94301CB 0x0406 352 #define SSB_BOARD_BCM94301MP 0x0407 353 #define SSB_BOARD_BU4309 0x040A 354 #define SSB_BOARD_BCM94309CB 0x040B 355 #define SSB_BOARD_BCM4309MP 0x040C 356 #define SSB_BOARD_BU4306 0x0416 357 #define SSB_BOARD_BCM94306MP 0x0418 358 #define SSB_BOARD_BCM4309G 0x0421 359 #define SSB_BOARD_BCM4306CB 0x0417 360 #define SSB_BOARD_BCM94306PC 0x0425 /* pcmcia 3.3v 4306 card */ 361 #define SSB_BOARD_BCM94306CBSG 0x042B /* with SiGe PA */ 362 #define SSB_BOARD_PCSG94306 0x042D /* with SiGe PA */ 363 #define SSB_BOARD_BU4704SD 0x042E /* with sdram */ 364 #define SSB_BOARD_BCM94704AGR 0x042F /* dual 11a/11g Router */ 365 #define SSB_BOARD_BCM94308MP 0x0430 /* 11a-only minipci */ 366 #define SSB_BOARD_BU4318 0x0447 367 #define SSB_BOARD_CB4318 0x0448 368 #define SSB_BOARD_MPG4318 0x0449 369 #define SSB_BOARD_MP4318 0x044A 370 #define SSB_BOARD_SD4318 0x044B 371 #define SSB_BOARD_BCM94306P 0x044C /* with SiGe */ 372 #define SSB_BOARD_BCM94303MP 0x044E 373 #define SSB_BOARD_BCM94306MPM 0x0450 374 #define SSB_BOARD_BCM94306MPL 0x0453 375 #define SSB_BOARD_PC4303 0x0454 /* pcmcia */ 376 #define SSB_BOARD_BCM94306MPLNA 0x0457 377 #define SSB_BOARD_BCM94306MPH 0x045B 378 #define SSB_BOARD_BCM94306PCIV 0x045C 379 #define SSB_BOARD_BCM94318MPGH 0x0463 380 #define SSB_BOARD_BU4311 0x0464 381 #define SSB_BOARD_BCM94311MC 0x0465 382 #define SSB_BOARD_BCM94311MCAG 0x0466 383 /* 4321 boards */ 384 #define SSB_BOARD_BU4321 0x046B 385 #define SSB_BOARD_BU4321E 0x047C 386 #define SSB_BOARD_MP4321 0x046C 387 #define SSB_BOARD_CB2_4321 0x046D 388 #define SSB_BOARD_CB2_4321_AG 0x0066 389 #define SSB_BOARD_MC4321 0x046E 390 /* 4325 boards */ 391 #define SSB_BOARD_BCM94325DEVBU 0x0490 392 #define SSB_BOARD_BCM94325BGABU 0x0491 393 #define SSB_BOARD_BCM94325SDGWB 0x0492 394 #define SSB_BOARD_BCM94325SDGMDL 0x04AA 395 #define SSB_BOARD_BCM94325SDGMDL2 0x04C6 396 #define SSB_BOARD_BCM94325SDGMDL3 0x04C9 397 #define SSB_BOARD_BCM94325SDABGWBA 0x04E1 398 /* 4322 boards */ 399 #define SSB_BOARD_BCM94322MC 0x04A4 400 #define SSB_BOARD_BCM94322USB 0x04A8 /* dualband */ 401 #define SSB_BOARD_BCM94322HM 0x04B0 402 #define SSB_BOARD_BCM94322USB2D 0x04Bf /* single band discrete front end */ 403 /* 4312 boards */ 404 #define SSB_BOARD_BU4312 0x048A 405 #define SSB_BOARD_BCM4312MCGSG 0x04B5 406 /* chip_package */ 407 #define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */ 408 #define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */ 409 #define SSB_CHIPPACK_BCM4712L 0 /* Large 340pin 4712 */ 410 411 #include <linux/ssb/ssb_driver_chipcommon.h> 412 #include <linux/ssb/ssb_driver_mips.h> 413 #include <linux/ssb/ssb_driver_extif.h> 414 #include <linux/ssb/ssb_driver_pci.h> 415 416 struct ssb_bus { 417 /* The MMIO area. */ 418 void __iomem *mmio; 419 420 const struct ssb_bus_ops *ops; 421 422 /* The core currently mapped into the MMIO window. 423 * Not valid on all host-buses. So don't use outside of SSB. */ 424 struct ssb_device *mapped_device; 425 union { 426 /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ 427 u8 mapped_pcmcia_seg; 428 /* Current SSB base address window for SDIO. */ 429 u32 sdio_sbaddr; 430 }; 431 /* Lock for core and segment switching. 432 * On PCMCIA-host busses this is used to protect the whole MMIO access. */ 433 spinlock_t bar_lock; 434 435 /* The host-bus this backplane is running on. */ 436 enum ssb_bustype bustype; 437 /* Pointers to the host-bus. Check bustype before using any of these pointers. */ 438 union { 439 /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */ 440 struct pci_dev *host_pci; 441 /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ 442 struct pcmcia_device *host_pcmcia; 443 /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */ 444 struct sdio_func *host_sdio; 445 }; 446 447 /* See enum ssb_quirks */ 448 unsigned int quirks; 449 450 #ifdef CONFIG_SSB_SPROM 451 /* Mutex to protect the SPROM writing. */ 452 struct mutex sprom_mutex; 453 #endif 454 455 /* ID information about the Chip. */ 456 u16 chip_id; 457 u8 chip_rev; 458 u16 sprom_offset; 459 u16 sprom_size; /* number of words in sprom */ 460 u8 chip_package; 461 462 /* List of devices (cores) on the backplane. */ 463 struct ssb_device devices[SSB_MAX_NR_CORES]; 464 u8 nr_devices; 465 466 /* Software ID number for this bus. */ 467 unsigned int busnumber; 468 469 /* The ChipCommon device (if available). */ 470 struct ssb_chipcommon chipco; 471 /* The PCI-core device (if available). */ 472 struct ssb_pcicore pcicore; 473 /* The MIPS-core device (if available). */ 474 struct ssb_mipscore mipscore; 475 /* The EXTif-core device (if available). */ 476 struct ssb_extif extif; 477 478 /* The following structure elements are not available in early 479 * SSB initialization. Though, they are available for regular 480 * registered drivers at any stage. So be careful when 481 * using them in the ssb core code. */ 482 483 /* ID information about the PCB. */ 484 struct ssb_boardinfo boardinfo; 485 /* Contents of the SPROM. */ 486 struct ssb_sprom sprom; 487 /* If the board has a cardbus slot, this is set to true. */ 488 bool has_cardbus_slot; 489 490 #ifdef CONFIG_SSB_EMBEDDED 491 /* Lock for GPIO register access. */ 492 spinlock_t gpio_lock; 493 struct platform_device *watchdog; 494 #endif /* EMBEDDED */ 495 #ifdef CONFIG_SSB_DRIVER_GPIO 496 struct gpio_chip gpio; 497 struct irq_domain *irq_domain; 498 #endif /* DRIVER_GPIO */ 499 500 /* Internal-only stuff follows. Do not touch. */ 501 struct list_head list; 502 /* Is the bus already powered up? */ 503 bool powered_up; 504 int power_warn_count; 505 }; 506 507 enum ssb_quirks { 508 /* SDIO connected card requires performing a read after writing a 32-bit value */ 509 SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0), 510 }; 511 512 /* The initialization-invariants. */ 513 struct ssb_init_invariants { 514 /* Versioning information about the PCB. */ 515 struct ssb_boardinfo boardinfo; 516 /* The SPROM information. That's either stored in an 517 * EEPROM or NVRAM on the board. */ 518 struct ssb_sprom sprom; 519 /* If the board has a cardbus slot, this is set to true. */ 520 bool has_cardbus_slot; 521 }; 522 /* Type of function to fetch the invariants. */ 523 typedef int (*ssb_invariants_func_t)(struct ssb_bus *bus, 524 struct ssb_init_invariants *iv); 525 526 /* Register SoC bus. */ 527 extern int ssb_bus_host_soc_register(struct ssb_bus *bus, 528 unsigned long baseaddr); 529 #ifdef CONFIG_SSB_PCIHOST 530 extern int ssb_bus_pcibus_register(struct ssb_bus *bus, 531 struct pci_dev *host_pci); 532 #endif /* CONFIG_SSB_PCIHOST */ 533 #ifdef CONFIG_SSB_PCMCIAHOST 534 extern int ssb_bus_pcmciabus_register(struct ssb_bus *bus, 535 struct pcmcia_device *pcmcia_dev, 536 unsigned long baseaddr); 537 #endif /* CONFIG_SSB_PCMCIAHOST */ 538 #ifdef CONFIG_SSB_SDIOHOST 539 extern int ssb_bus_sdiobus_register(struct ssb_bus *bus, 540 struct sdio_func *sdio_func, 541 unsigned int quirks); 542 #endif /* CONFIG_SSB_SDIOHOST */ 543 544 545 extern void ssb_bus_unregister(struct ssb_bus *bus); 546 547 /* Does the device have an SPROM? */ 548 extern bool ssb_is_sprom_available(struct ssb_bus *bus); 549 550 /* Set a fallback SPROM. 551 * See kdoc at the function definition for complete documentation. */ 552 extern int ssb_arch_register_fallback_sprom( 553 int (*sprom_callback)(struct ssb_bus *bus, 554 struct ssb_sprom *out)); 555 556 /* Suspend a SSB bus. 557 * Call this from the parent bus suspend routine. */ 558 extern int ssb_bus_suspend(struct ssb_bus *bus); 559 /* Resume a SSB bus. 560 * Call this from the parent bus resume routine. */ 561 extern int ssb_bus_resume(struct ssb_bus *bus); 562 563 extern u32 ssb_clockspeed(struct ssb_bus *bus); 564 565 /* Is the device enabled in hardware? */ 566 int ssb_device_is_enabled(struct ssb_device *dev); 567 /* Enable a device and pass device-specific SSB_TMSLOW flags. 568 * If no device-specific flags are available, use 0. */ 569 void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags); 570 /* Disable a device in hardware and pass SSB_TMSLOW flags (if any). */ 571 void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags); 572 573 574 /* Device MMIO register read/write functions. */ 575 static inline u8 ssb_read8(struct ssb_device *dev, u16 offset) 576 { 577 return dev->ops->read8(dev, offset); 578 } 579 static inline u16 ssb_read16(struct ssb_device *dev, u16 offset) 580 { 581 return dev->ops->read16(dev, offset); 582 } 583 static inline u32 ssb_read32(struct ssb_device *dev, u16 offset) 584 { 585 return dev->ops->read32(dev, offset); 586 } 587 static inline void ssb_write8(struct ssb_device *dev, u16 offset, u8 value) 588 { 589 dev->ops->write8(dev, offset, value); 590 } 591 static inline void ssb_write16(struct ssb_device *dev, u16 offset, u16 value) 592 { 593 dev->ops->write16(dev, offset, value); 594 } 595 static inline void ssb_write32(struct ssb_device *dev, u16 offset, u32 value) 596 { 597 dev->ops->write32(dev, offset, value); 598 } 599 #ifdef CONFIG_SSB_BLOCKIO 600 static inline void ssb_block_read(struct ssb_device *dev, void *buffer, 601 size_t count, u16 offset, u8 reg_width) 602 { 603 dev->ops->block_read(dev, buffer, count, offset, reg_width); 604 } 605 606 static inline void ssb_block_write(struct ssb_device *dev, const void *buffer, 607 size_t count, u16 offset, u8 reg_width) 608 { 609 dev->ops->block_write(dev, buffer, count, offset, reg_width); 610 } 611 #endif /* CONFIG_SSB_BLOCKIO */ 612 613 614 /* The SSB DMA API. Use this API for any DMA operation on the device. 615 * This API basically is a wrapper that calls the correct DMA API for 616 * the host device type the SSB device is attached to. */ 617 618 /* Translation (routing) bits that need to be ORed to DMA 619 * addresses before they are given to a device. */ 620 extern u32 ssb_dma_translation(struct ssb_device *dev); 621 #define SSB_DMA_TRANSLATION_MASK 0xC0000000 622 #define SSB_DMA_TRANSLATION_SHIFT 30 623 624 static inline void __cold __ssb_dma_not_implemented(struct ssb_device *dev) 625 { 626 #ifdef CONFIG_SSB_DEBUG 627 printk(KERN_ERR "SSB: BUG! Calling DMA API for " 628 "unsupported bustype %d\n", dev->bus->bustype); 629 #endif /* DEBUG */ 630 } 631 632 #ifdef CONFIG_SSB_PCIHOST 633 /* PCI-host wrapper driver */ 634 extern int ssb_pcihost_register(struct pci_driver *driver); 635 static inline void ssb_pcihost_unregister(struct pci_driver *driver) 636 { 637 pci_unregister_driver(driver); 638 } 639 640 static inline 641 void ssb_pcihost_set_power_state(struct ssb_device *sdev, pci_power_t state) 642 { 643 if (sdev->bus->bustype == SSB_BUSTYPE_PCI) 644 pci_set_power_state(sdev->bus->host_pci, state); 645 } 646 #else 647 static inline void ssb_pcihost_unregister(struct pci_driver *driver) 648 { 649 } 650 651 static inline 652 void ssb_pcihost_set_power_state(struct ssb_device *sdev, pci_power_t state) 653 { 654 } 655 #endif /* CONFIG_SSB_PCIHOST */ 656 657 658 /* If a driver is shutdown or suspended, call this to signal 659 * that the bus may be completely powered down. SSB will decide, 660 * if it's really time to power down the bus, based on if there 661 * are other devices that want to run. */ 662 extern int ssb_bus_may_powerdown(struct ssb_bus *bus); 663 /* Before initializing and enabling a device, call this to power-up the bus. 664 * If you want to allow use of dynamic-power-control, pass the flag. 665 * Otherwise static always-on powercontrol will be used. */ 666 extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); 667 668 extern void ssb_commit_settings(struct ssb_bus *bus); 669 670 /* Various helper functions */ 671 extern u32 ssb_admatch_base(u32 adm); 672 extern u32 ssb_admatch_size(u32 adm); 673 674 /* PCI device mapping and fixup routines. 675 * Called from the architecture pcibios init code. 676 * These are only available on SSB_EMBEDDED configurations. */ 677 #ifdef CONFIG_SSB_EMBEDDED 678 int ssb_pcibios_plat_dev_init(struct pci_dev *dev); 679 int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); 680 #endif /* CONFIG_SSB_EMBEDDED */ 681 682 #endif /* LINUX_SSB_H_ */ 683