1 /* 2 * RapidIO interconnect services 3 * (RapidIO Interconnect Specification, http://www.rapidio.org) 4 * 5 * Copyright 2005 MontaVista Software, Inc. 6 * Matt Porter <mporter@kernel.crashing.org> 7 * 8 * This program is free software; you can redistribute it and/or modify it 9 * under the terms of the GNU General Public License as published by the 10 * Free Software Foundation; either version 2 of the License, or (at your 11 * option) any later version. 12 */ 13 14 #ifndef LINUX_RIO_H 15 #define LINUX_RIO_H 16 17 #include <linux/types.h> 18 #include <linux/ioport.h> 19 #include <linux/list.h> 20 #include <linux/errno.h> 21 #include <linux/device.h> 22 #include <linux/rio_regs.h> 23 #include <linux/mod_devicetable.h> 24 #ifdef CONFIG_RAPIDIO_DMA_ENGINE 25 #include <linux/dmaengine.h> 26 #endif 27 28 #define RIO_NO_HOPCOUNT -1 29 #define RIO_INVALID_DESTID 0xffff 30 31 #define RIO_MAX_MPORTS 8 32 #define RIO_MAX_MPORT_RESOURCES 16 33 #define RIO_MAX_DEV_RESOURCES 16 34 #define RIO_MAX_MPORT_NAME 40 35 36 #define RIO_GLOBAL_TABLE 0xff /* Indicates access of a switch's 37 global routing table if it 38 has multiple (or per port) 39 tables */ 40 41 #define RIO_INVALID_ROUTE 0xff /* Indicates that a route table 42 entry is invalid (no route 43 exists for the device ID) */ 44 45 #define RIO_MAX_ROUTE_ENTRIES(size) (size ? (1 << 16) : (1 << 8)) 46 #define RIO_ANY_DESTID(size) (size ? 0xffff : 0xff) 47 48 #define RIO_MAX_MBOX 4 49 #define RIO_MAX_MSG_SIZE 0x1000 50 51 /* 52 * Error values that may be returned by RIO functions. 53 */ 54 #define RIO_SUCCESSFUL 0x00 55 #define RIO_BAD_SIZE 0x81 56 57 /* 58 * For RIO devices, the region numbers are assigned this way: 59 * 60 * 0 RapidIO outbound doorbells 61 * 1-15 RapidIO memory regions 62 * 63 * For RIO master ports, the region number are assigned this way: 64 * 65 * 0 RapidIO inbound doorbells 66 * 1 RapidIO inbound mailboxes 67 * 2 RapidIO outbound mailboxes 68 */ 69 #define RIO_DOORBELL_RESOURCE 0 70 #define RIO_INB_MBOX_RESOURCE 1 71 #define RIO_OUTB_MBOX_RESOURCE 2 72 73 #define RIO_PW_MSG_SIZE 64 74 75 /* 76 * A component tag value (stored in the component tag CSR) is used as device's 77 * unique identifier assigned during enumeration. Besides being used for 78 * identifying switches (which do not have device ID register), it also is used 79 * by error management notification and therefore has to be assigned 80 * to endpoints as well. 81 */ 82 #define RIO_CTAG_RESRVD 0xfffe0000 /* Reserved */ 83 #define RIO_CTAG_UDEVID 0x0001ffff /* Unique device identifier */ 84 85 extern struct bus_type rio_bus_type; 86 extern struct device rio_bus; 87 88 struct rio_mport; 89 struct rio_dev; 90 union rio_pw_msg; 91 92 /** 93 * struct rio_switch - RIO switch info 94 * @node: Node in global list of switches 95 * @route_table: Copy of switch routing table 96 * @port_ok: Status of each port (one bit per port) - OK=1 or UNINIT=0 97 * @ops: pointer to switch-specific operations 98 * @lock: lock to serialize operations updates 99 * @nextdev: Array of per-port pointers to the next attached device 100 */ 101 struct rio_switch { 102 struct list_head node; 103 u8 *route_table; 104 u32 port_ok; 105 struct rio_switch_ops *ops; 106 spinlock_t lock; 107 struct rio_dev *nextdev[0]; 108 }; 109 110 /** 111 * struct rio_switch_ops - Per-switch operations 112 * @owner: The module owner of this structure 113 * @add_entry: Callback for switch-specific route add function 114 * @get_entry: Callback for switch-specific route get function 115 * @clr_table: Callback for switch-specific clear route table function 116 * @set_domain: Callback for switch-specific domain setting function 117 * @get_domain: Callback for switch-specific domain get function 118 * @em_init: Callback for switch-specific error management init function 119 * @em_handle: Callback for switch-specific error management handler function 120 * 121 * Defines the operations that are necessary to initialize/control 122 * a particular RIO switch device. 123 */ 124 struct rio_switch_ops { 125 struct module *owner; 126 int (*add_entry) (struct rio_mport *mport, u16 destid, u8 hopcount, 127 u16 table, u16 route_destid, u8 route_port); 128 int (*get_entry) (struct rio_mport *mport, u16 destid, u8 hopcount, 129 u16 table, u16 route_destid, u8 *route_port); 130 int (*clr_table) (struct rio_mport *mport, u16 destid, u8 hopcount, 131 u16 table); 132 int (*set_domain) (struct rio_mport *mport, u16 destid, u8 hopcount, 133 u8 sw_domain); 134 int (*get_domain) (struct rio_mport *mport, u16 destid, u8 hopcount, 135 u8 *sw_domain); 136 int (*em_init) (struct rio_dev *dev); 137 int (*em_handle) (struct rio_dev *dev, u8 swport); 138 }; 139 140 /** 141 * struct rio_dev - RIO device info 142 * @global_list: Node in list of all RIO devices 143 * @net_list: Node in list of RIO devices in a network 144 * @net: Network this device is a part of 145 * @do_enum: Enumeration flag 146 * @did: Device ID 147 * @vid: Vendor ID 148 * @device_rev: Device revision 149 * @asm_did: Assembly device ID 150 * @asm_vid: Assembly vendor ID 151 * @asm_rev: Assembly revision 152 * @efptr: Extended feature pointer 153 * @pef: Processing element features 154 * @swpinfo: Switch port info 155 * @src_ops: Source operation capabilities 156 * @dst_ops: Destination operation capabilities 157 * @comp_tag: RIO component tag 158 * @phys_efptr: RIO device extended features pointer 159 * @em_efptr: RIO Error Management features pointer 160 * @dma_mask: Mask of bits of RIO address this device implements 161 * @driver: Driver claiming this device 162 * @dev: Device model device 163 * @riores: RIO resources this device owns 164 * @pwcback: port-write callback function for this device 165 * @destid: Network destination ID (or associated destid for switch) 166 * @hopcount: Hopcount to this device 167 * @prev: Previous RIO device connected to the current one 168 * @rswitch: struct rio_switch (if valid for this device) 169 */ 170 struct rio_dev { 171 struct list_head global_list; /* node in list of all RIO devices */ 172 struct list_head net_list; /* node in per net list */ 173 struct rio_net *net; /* RIO net this device resides in */ 174 bool do_enum; 175 u16 did; 176 u16 vid; 177 u32 device_rev; 178 u16 asm_did; 179 u16 asm_vid; 180 u16 asm_rev; 181 u16 efptr; 182 u32 pef; 183 u32 swpinfo; 184 u32 src_ops; 185 u32 dst_ops; 186 u32 comp_tag; 187 u32 phys_efptr; 188 u32 em_efptr; 189 u64 dma_mask; 190 struct rio_driver *driver; /* RIO driver claiming this device */ 191 struct device dev; /* LDM device structure */ 192 struct resource riores[RIO_MAX_DEV_RESOURCES]; 193 int (*pwcback) (struct rio_dev *rdev, union rio_pw_msg *msg, int step); 194 u16 destid; 195 u8 hopcount; 196 struct rio_dev *prev; 197 struct rio_switch rswitch[0]; /* RIO switch info */ 198 }; 199 200 #define rio_dev_g(n) list_entry(n, struct rio_dev, global_list) 201 #define rio_dev_f(n) list_entry(n, struct rio_dev, net_list) 202 #define to_rio_dev(n) container_of(n, struct rio_dev, dev) 203 #define sw_to_rio_dev(n) container_of(n, struct rio_dev, rswitch[0]) 204 205 /** 206 * struct rio_msg - RIO message event 207 * @res: Mailbox resource 208 * @mcback: Message event callback 209 */ 210 struct rio_msg { 211 struct resource *res; 212 void (*mcback) (struct rio_mport * mport, void *dev_id, int mbox, int slot); 213 }; 214 215 /** 216 * struct rio_dbell - RIO doorbell event 217 * @node: Node in list of doorbell events 218 * @res: Doorbell resource 219 * @dinb: Doorbell event callback 220 * @dev_id: Device specific pointer to pass on event 221 */ 222 struct rio_dbell { 223 struct list_head node; 224 struct resource *res; 225 void (*dinb) (struct rio_mport *mport, void *dev_id, u16 src, u16 dst, u16 info); 226 void *dev_id; 227 }; 228 229 enum rio_phy_type { 230 RIO_PHY_PARALLEL, 231 RIO_PHY_SERIAL, 232 }; 233 234 /** 235 * struct rio_mport - RIO master port info 236 * @dbells: List of doorbell events 237 * @node: Node in global list of master ports 238 * @nnode: Node in network list of master ports 239 * @iores: I/O mem resource that this master port interface owns 240 * @riores: RIO resources that this master port interfaces owns 241 * @inb_msg: RIO inbound message event descriptors 242 * @outb_msg: RIO outbound message event descriptors 243 * @host_deviceid: Host device ID associated with this master port 244 * @ops: configuration space functions 245 * @id: Port ID, unique among all ports 246 * @index: Port index, unique among all port interfaces of the same type 247 * @sys_size: RapidIO common transport system size 248 * @phy_type: RapidIO phy type 249 * @phys_efptr: RIO port extended features pointer 250 * @name: Port name string 251 * @priv: Master port private data 252 * @dma: DMA device associated with mport 253 * @nscan: RapidIO network enumeration/discovery operations 254 */ 255 struct rio_mport { 256 struct list_head dbells; /* list of doorbell events */ 257 struct list_head node; /* node in global list of ports */ 258 struct list_head nnode; /* node in net list of ports */ 259 struct resource iores; 260 struct resource riores[RIO_MAX_MPORT_RESOURCES]; 261 struct rio_msg inb_msg[RIO_MAX_MBOX]; 262 struct rio_msg outb_msg[RIO_MAX_MBOX]; 263 int host_deviceid; /* Host device ID */ 264 struct rio_ops *ops; /* low-level architecture-dependent routines */ 265 unsigned char id; /* port ID, unique among all ports */ 266 unsigned char index; /* port index, unique among all port 267 interfaces of the same type */ 268 unsigned int sys_size; /* RapidIO common transport system size. 269 * 0 - Small size. 256 devices. 270 * 1 - Large size, 65536 devices. 271 */ 272 enum rio_phy_type phy_type; /* RapidIO phy type */ 273 u32 phys_efptr; 274 unsigned char name[RIO_MAX_MPORT_NAME]; 275 void *priv; /* Master port private data */ 276 #ifdef CONFIG_RAPIDIO_DMA_ENGINE 277 struct dma_device dma; 278 #endif 279 struct rio_scan *nscan; 280 }; 281 282 /* 283 * Enumeration/discovery control flags 284 */ 285 #define RIO_SCAN_ENUM_NO_WAIT 0x00000001 /* Do not wait for enum completed */ 286 287 struct rio_id_table { 288 u16 start; /* logical minimal id */ 289 u32 max; /* max number of IDs in table */ 290 spinlock_t lock; 291 unsigned long *table; 292 }; 293 294 /** 295 * struct rio_net - RIO network info 296 * @node: Node in global list of RIO networks 297 * @devices: List of devices in this network 298 * @switches: List of switches in this netowrk 299 * @mports: List of master ports accessing this network 300 * @hport: Default port for accessing this network 301 * @id: RIO network ID 302 * @destid_table: destID allocation table 303 */ 304 struct rio_net { 305 struct list_head node; /* node in list of networks */ 306 struct list_head devices; /* list of devices in this net */ 307 struct list_head switches; /* list of switches in this net */ 308 struct list_head mports; /* list of ports accessing net */ 309 struct rio_mport *hport; /* primary port for accessing net */ 310 unsigned char id; /* RIO network ID */ 311 struct rio_id_table destid_table; /* destID allocation table */ 312 }; 313 314 /* Low-level architecture-dependent routines */ 315 316 /** 317 * struct rio_ops - Low-level RIO configuration space operations 318 * @lcread: Callback to perform local (master port) read of config space. 319 * @lcwrite: Callback to perform local (master port) write of config space. 320 * @cread: Callback to perform network read of config space. 321 * @cwrite: Callback to perform network write of config space. 322 * @dsend: Callback to send a doorbell message. 323 * @pwenable: Callback to enable/disable port-write message handling. 324 * @open_outb_mbox: Callback to initialize outbound mailbox. 325 * @close_outb_mbox: Callback to shut down outbound mailbox. 326 * @open_inb_mbox: Callback to initialize inbound mailbox. 327 * @close_inb_mbox: Callback to shut down inbound mailbox. 328 * @add_outb_message: Callback to add a message to an outbound mailbox queue. 329 * @add_inb_buffer: Callback to add a buffer to an inbound mailbox queue. 330 * @get_inb_message: Callback to get a message from an inbound mailbox queue. 331 * @map_inb: Callback to map RapidIO address region into local memory space. 332 * @unmap_inb: Callback to unmap RapidIO address region mapped with map_inb(). 333 */ 334 struct rio_ops { 335 int (*lcread) (struct rio_mport *mport, int index, u32 offset, int len, 336 u32 *data); 337 int (*lcwrite) (struct rio_mport *mport, int index, u32 offset, int len, 338 u32 data); 339 int (*cread) (struct rio_mport *mport, int index, u16 destid, 340 u8 hopcount, u32 offset, int len, u32 *data); 341 int (*cwrite) (struct rio_mport *mport, int index, u16 destid, 342 u8 hopcount, u32 offset, int len, u32 data); 343 int (*dsend) (struct rio_mport *mport, int index, u16 destid, u16 data); 344 int (*pwenable) (struct rio_mport *mport, int enable); 345 int (*open_outb_mbox)(struct rio_mport *mport, void *dev_id, 346 int mbox, int entries); 347 void (*close_outb_mbox)(struct rio_mport *mport, int mbox); 348 int (*open_inb_mbox)(struct rio_mport *mport, void *dev_id, 349 int mbox, int entries); 350 void (*close_inb_mbox)(struct rio_mport *mport, int mbox); 351 int (*add_outb_message)(struct rio_mport *mport, struct rio_dev *rdev, 352 int mbox, void *buffer, size_t len); 353 int (*add_inb_buffer)(struct rio_mport *mport, int mbox, void *buf); 354 void *(*get_inb_message)(struct rio_mport *mport, int mbox); 355 int (*map_inb)(struct rio_mport *mport, dma_addr_t lstart, 356 u64 rstart, u32 size, u32 flags); 357 void (*unmap_inb)(struct rio_mport *mport, dma_addr_t lstart); 358 }; 359 360 #define RIO_RESOURCE_MEM 0x00000100 361 #define RIO_RESOURCE_DOORBELL 0x00000200 362 #define RIO_RESOURCE_MAILBOX 0x00000400 363 364 #define RIO_RESOURCE_CACHEABLE 0x00010000 365 #define RIO_RESOURCE_PCI 0x00020000 366 367 #define RIO_RESOURCE_BUSY 0x80000000 368 369 /** 370 * struct rio_driver - RIO driver info 371 * @node: Node in list of drivers 372 * @name: RIO driver name 373 * @id_table: RIO device ids to be associated with this driver 374 * @probe: RIO device inserted 375 * @remove: RIO device removed 376 * @suspend: RIO device suspended 377 * @resume: RIO device awakened 378 * @enable_wake: RIO device enable wake event 379 * @driver: LDM driver struct 380 * 381 * Provides info on a RIO device driver for insertion/removal and 382 * power management purposes. 383 */ 384 struct rio_driver { 385 struct list_head node; 386 char *name; 387 const struct rio_device_id *id_table; 388 int (*probe) (struct rio_dev * dev, const struct rio_device_id * id); 389 void (*remove) (struct rio_dev * dev); 390 int (*suspend) (struct rio_dev * dev, u32 state); 391 int (*resume) (struct rio_dev * dev); 392 int (*enable_wake) (struct rio_dev * dev, u32 state, int enable); 393 struct device_driver driver; 394 }; 395 396 #define to_rio_driver(drv) container_of(drv,struct rio_driver, driver) 397 398 union rio_pw_msg { 399 struct { 400 u32 comptag; /* Component Tag CSR */ 401 u32 errdetect; /* Port N Error Detect CSR */ 402 u32 is_port; /* Implementation specific + PortID */ 403 u32 ltlerrdet; /* LTL Error Detect CSR */ 404 u32 padding[12]; 405 } em; 406 u32 raw[RIO_PW_MSG_SIZE/sizeof(u32)]; 407 }; 408 409 #ifdef CONFIG_RAPIDIO_DMA_ENGINE 410 411 /* 412 * enum rio_write_type - RIO write transaction types used in DMA transfers 413 * 414 * Note: RapidIO specification defines write (NWRITE) and 415 * write-with-response (NWRITE_R) data transfer operations. 416 * Existing DMA controllers that service RapidIO may use one of these operations 417 * for entire data transfer or their combination with only the last data packet 418 * requires response. 419 */ 420 enum rio_write_type { 421 RDW_DEFAULT, /* default method used by DMA driver */ 422 RDW_ALL_NWRITE, /* all packets use NWRITE */ 423 RDW_ALL_NWRITE_R, /* all packets use NWRITE_R */ 424 RDW_LAST_NWRITE_R, /* last packet uses NWRITE_R, others - NWRITE */ 425 }; 426 427 struct rio_dma_ext { 428 u16 destid; 429 u64 rio_addr; /* low 64-bits of 66-bit RapidIO address */ 430 u8 rio_addr_u; /* upper 2-bits of 66-bit RapidIO address */ 431 enum rio_write_type wr_type; /* preferred RIO write operation type */ 432 }; 433 434 struct rio_dma_data { 435 /* Local data (as scatterlist) */ 436 struct scatterlist *sg; /* I/O scatter list */ 437 unsigned int sg_len; /* size of scatter list */ 438 /* Remote device address (flat buffer) */ 439 u64 rio_addr; /* low 64-bits of 66-bit RapidIO address */ 440 u8 rio_addr_u; /* upper 2-bits of 66-bit RapidIO address */ 441 enum rio_write_type wr_type; /* preferred RIO write operation type */ 442 }; 443 444 static inline struct rio_mport *dma_to_mport(struct dma_device *ddev) 445 { 446 return container_of(ddev, struct rio_mport, dma); 447 } 448 #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ 449 450 /** 451 * struct rio_scan - RIO enumeration and discovery operations 452 * @owner: The module owner of this structure 453 * @enumerate: Callback to perform RapidIO fabric enumeration. 454 * @discover: Callback to perform RapidIO fabric discovery. 455 */ 456 struct rio_scan { 457 struct module *owner; 458 int (*enumerate)(struct rio_mport *mport, u32 flags); 459 int (*discover)(struct rio_mport *mport, u32 flags); 460 }; 461 462 /** 463 * struct rio_scan_node - list node to register RapidIO enumeration and 464 * discovery methods with RapidIO core. 465 * @mport_id: ID of an mport (net) serviced by this enumerator 466 * @node: node in global list of registered enumerators 467 * @ops: RIO enumeration and discovery operations 468 */ 469 struct rio_scan_node { 470 int mport_id; 471 struct list_head node; 472 struct rio_scan *ops; 473 }; 474 475 /* Architecture and hardware-specific functions */ 476 extern int rio_register_mport(struct rio_mport *); 477 extern int rio_open_inb_mbox(struct rio_mport *, void *, int, int); 478 extern void rio_close_inb_mbox(struct rio_mport *, int); 479 extern int rio_open_outb_mbox(struct rio_mport *, void *, int, int); 480 extern void rio_close_outb_mbox(struct rio_mport *, int); 481 482 #endif /* LINUX_RIO_H */ 483