xref: /linux/include/linux/mtd/sh_flctl.h (revision c4ee0af3fa0dc65f690fc908f02b8355f9576ea0)
1 /*
2  * SuperH FLCTL nand controller
3  *
4  * Copyright © 2008 Renesas Solutions Corp.
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; version 2 of the License.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  *
15  * You should have received a copy of the GNU General Public License
16  * along with this program; if not, write to the Free Software
17  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
18  */
19 
20 #ifndef __SH_FLCTL_H__
21 #define __SH_FLCTL_H__
22 
23 #include <linux/completion.h>
24 #include <linux/mtd/mtd.h>
25 #include <linux/mtd/nand.h>
26 #include <linux/mtd/partitions.h>
27 #include <linux/pm_qos.h>
28 
29 /* FLCTL registers */
30 #define FLCMNCR(f)		(f->reg + 0x0)
31 #define FLCMDCR(f)		(f->reg + 0x4)
32 #define FLCMCDR(f)		(f->reg + 0x8)
33 #define FLADR(f)		(f->reg + 0xC)
34 #define FLADR2(f)		(f->reg + 0x3C)
35 #define FLDATAR(f)		(f->reg + 0x10)
36 #define FLDTCNTR(f)		(f->reg + 0x14)
37 #define FLINTDMACR(f)		(f->reg + 0x18)
38 #define FLBSYTMR(f)		(f->reg + 0x1C)
39 #define FLBSYCNT(f)		(f->reg + 0x20)
40 #define FLDTFIFO(f)		(f->reg + 0x24)
41 #define FLECFIFO(f)		(f->reg + 0x28)
42 #define FLTRCR(f)		(f->reg + 0x2C)
43 #define FLHOLDCR(f)		(f->reg + 0x38)
44 #define	FL4ECCRESULT0(f)	(f->reg + 0x80)
45 #define	FL4ECCRESULT1(f)	(f->reg + 0x84)
46 #define	FL4ECCRESULT2(f)	(f->reg + 0x88)
47 #define	FL4ECCRESULT3(f)	(f->reg + 0x8C)
48 #define	FL4ECCCR(f)		(f->reg + 0x90)
49 #define	FL4ECCCNT(f)		(f->reg + 0x94)
50 #define	FLERRADR(f)		(f->reg + 0x98)
51 
52 /* FLCMNCR control bits */
53 #define _4ECCCNTEN	(0x1 << 24)
54 #define _4ECCEN		(0x1 << 23)
55 #define _4ECCCORRECT	(0x1 << 22)
56 #define SHBUSSEL	(0x1 << 20)
57 #define SEL_16BIT	(0x1 << 19)
58 #define SNAND_E		(0x1 << 18)	/* SNAND (0=512 1=2048)*/
59 #define QTSEL_E		(0x1 << 17)
60 #define ENDIAN		(0x1 << 16)	/* 1 = little endian */
61 #define FCKSEL_E	(0x1 << 15)
62 #define ACM_SACCES_MODE	(0x01 << 10)
63 #define NANWF_E		(0x1 << 9)
64 #define SE_D		(0x1 << 8)	/* Spare area disable */
65 #define	CE1_ENABLE	(0x1 << 4)	/* Chip Enable 1 */
66 #define	CE0_ENABLE	(0x1 << 3)	/* Chip Enable 0 */
67 #define	TYPESEL_SET	(0x1 << 0)
68 
69 /*
70  * Clock settings using the PULSEx registers from FLCMNCR
71  *
72  * Some hardware uses bits called PULSEx instead of FCKSEL_E and QTSEL_E
73  * to control the clock divider used between the High-Speed Peripheral Clock
74  * and the FLCTL internal clock. If so, use CLK_8_BIT_xxx for connecting 8 bit
75  * and CLK_16_BIT_xxx for connecting 16 bit bus bandwith NAND chips. For the 16
76  * bit version the divider is seperate for the pulse width of high and low
77  * signals.
78  */
79 #define PULSE3	(0x1 << 27)
80 #define PULSE2	(0x1 << 17)
81 #define PULSE1	(0x1 << 15)
82 #define PULSE0	(0x1 << 9)
83 #define CLK_8B_0_5			PULSE1
84 #define CLK_8B_1			0x0
85 #define CLK_8B_1_5			(PULSE1 | PULSE2)
86 #define CLK_8B_2			PULSE0
87 #define CLK_8B_3			(PULSE0 | PULSE1 | PULSE2)
88 #define CLK_8B_4			(PULSE0 | PULSE2)
89 #define CLK_16B_6L_2H			PULSE0
90 #define CLK_16B_9L_3H			(PULSE0 | PULSE1 | PULSE2)
91 #define CLK_16B_12L_4H			(PULSE0 | PULSE2)
92 
93 /* FLCMDCR control bits */
94 #define ADRCNT2_E	(0x1 << 31)	/* 5byte address enable */
95 #define ADRMD_E		(0x1 << 26)	/* Sector address access */
96 #define CDSRC_E		(0x1 << 25)	/* Data buffer selection */
97 #define DOSR_E		(0x1 << 24)	/* Status read check */
98 #define SELRW		(0x1 << 21)	/*  0:read 1:write */
99 #define DOADR_E		(0x1 << 20)	/* Address stage execute */
100 #define ADRCNT_1	(0x00 << 18)	/* Address data bytes: 1byte */
101 #define ADRCNT_2	(0x01 << 18)	/* Address data bytes: 2byte */
102 #define ADRCNT_3	(0x02 << 18)	/* Address data bytes: 3byte */
103 #define ADRCNT_4	(0x03 << 18)	/* Address data bytes: 4byte */
104 #define DOCMD2_E	(0x1 << 17)	/* 2nd cmd stage execute */
105 #define DOCMD1_E	(0x1 << 16)	/* 1st cmd stage execute */
106 
107 /* FLINTDMACR control bits */
108 #define ESTERINTE	(0x1 << 24)	/* ECC error interrupt enable */
109 #define AC1CLR		(0x1 << 19)	/* ECC FIFO clear */
110 #define AC0CLR		(0x1 << 18)	/* Data FIFO clear */
111 #define DREQ0EN		(0x1 << 16)	/* FLDTFIFODMA Request Enable */
112 #define ECERB		(0x1 << 9)	/* ECC error */
113 #define STERB		(0x1 << 8)	/* Status error */
114 #define STERINTE	(0x1 << 4)	/* Status error enable */
115 
116 /* FLTRCR control bits */
117 #define TRSTRT		(0x1 << 0)	/* translation start */
118 #define TREND		(0x1 << 1)	/* translation end */
119 
120 /*
121  * FLHOLDCR control bits
122  *
123  * HOLDEN: Bus Occupancy Enable (inverted)
124  * Enable this bit when the external bus might be used in between transfers.
125  * If not set and the bus gets used by other modules, a deadlock occurs.
126  */
127 #define HOLDEN		(0x1 << 0)
128 
129 /* FL4ECCCR control bits */
130 #define	_4ECCFA		(0x1 << 2)	/* 4 symbols correct fault */
131 #define	_4ECCEND	(0x1 << 1)	/* 4 symbols end */
132 #define	_4ECCEXST	(0x1 << 0)	/* 4 symbols exist */
133 
134 #define LOOP_TIMEOUT_MAX	0x00010000
135 
136 enum flctl_ecc_res_t {
137 	FL_SUCCESS,
138 	FL_REPAIRABLE,
139 	FL_ERROR,
140 	FL_TIMEOUT
141 };
142 
143 struct dma_chan;
144 
145 struct sh_flctl {
146 	struct mtd_info		mtd;
147 	struct nand_chip	chip;
148 	struct platform_device	*pdev;
149 	struct dev_pm_qos_request pm_qos;
150 	void __iomem		*reg;
151 
152 	uint8_t	done_buff[2048 + 64];	/* max size 2048 + 64 */
153 	int	read_bytes;
154 	unsigned int index;
155 	int	seqin_column;		/* column in SEQIN cmd */
156 	int	seqin_page_addr;	/* page_addr in SEQIN cmd */
157 	uint32_t seqin_read_cmd;		/* read cmd in SEQIN cmd */
158 	int	erase1_page_addr;	/* page_addr in ERASE1 cmd */
159 	uint32_t erase_ADRCNT;		/* bits of FLCMDCR in ERASE1 cmd */
160 	uint32_t rw_ADRCNT;	/* bits of FLCMDCR in READ WRITE cmd */
161 	uint32_t flcmncr_base;	/* base value of FLCMNCR */
162 	uint32_t flintdmacr_base;	/* irq enable bits */
163 
164 	unsigned page_size:1;	/* NAND page size (0 = 512, 1 = 2048) */
165 	unsigned hwecc:1;	/* Hardware ECC (0 = disabled, 1 = enabled) */
166 	unsigned holden:1;	/* Hardware has FLHOLDCR and HOLDEN is set */
167 	unsigned qos_request:1;	/* QoS request to prevent deep power shutdown */
168 
169 	/* DMA related objects */
170 	struct dma_chan		*chan_fifo0_rx;
171 	struct dma_chan		*chan_fifo0_tx;
172 	struct completion	dma_complete;
173 };
174 
175 struct sh_flctl_platform_data {
176 	struct mtd_partition	*parts;
177 	int			nr_parts;
178 	unsigned long		flcmncr_val;
179 
180 	unsigned has_hwecc:1;
181 	unsigned use_holden:1;
182 
183 	unsigned int            slave_id_fifo0_tx;
184 	unsigned int            slave_id_fifo0_rx;
185 };
186 
187 static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo)
188 {
189 	return container_of(mtdinfo, struct sh_flctl, mtd);
190 }
191 
192 #endif	/* __SH_FLCTL_H__ */
193